ET4500U
NITEK
®
Quad Ethernet Port & PoE Extender
05082014
Description
The ET4500U is another component of the NITEK cutting edge
EtherStretch line. This Environmentally Hardened Etherstretch solution allows for the utilization of new or existing cable infrastructure to send Ethernet for extended distances. The ET4500U transmitter can be used with the multi-port receiver units supply PoE power to operate 4 IP cameras or other network devices. Transmitter power supply is included. The unit transmits data from the 4 IP network devices over common Catagory cable for distances up to 600 meters or 2000 feet.
The ET4500U is part of an overall system. This transmitter works in conjunction with a multi-port receiver and requires very little installation time and no set up and or configuration. These units quickly turn ordinary category cable into a high speed network communication and PoE pathways.
The ET4500U is transparent to the network thus requiring no IP and
MAC addressing. Simply connect your network devices to the networking ports of the transmitter and receiver along with existing cabling and the system begins communicating. LED indicators show the status of network communication and PoE power. The ET4500U requires no network settings to be changed or adjusted.
The NITEK EtherStretch ET4500U extends network communications to overcome cable distance limitations offering connections to devices in locations traditional networking does not allow. The ET4500U is ideal for retrofitting existing installations. The unit is constructed of industrial grade RoHS compliant plated aluminum which is finished with a corrosion resistant finish making it very durable.
Features
●
Environmentally hardened
●
Supports 10/100 and PoE over Category cables up to distances of 600 meters (2000 feet)
●
Fully transparent to the network
●
Supports 4 network devices, including mega-pixel technology IP cameras
●
Easy to install, no set up required
●
No MAC or IP addressing required
●
LED indicators for network signals, link status and power
●
50 Watt power supply can insert PoE power for non-PoE switches
●
Surge protected inputs
●
Ground loop isolation
●
Made in the U.S.A.
Patent Pending
RoHS
COMPLIANT
2002/95/EC
5410 Newport Drive, # 24
Rolling Meadows, IL 60008
Phone: (847) 259-8900
Fax: (847) 259-1300
E-mail: [email protected]
WWW.NITEK.NET
De Aar 99
8253 PN Dronten
The Netherlands
Tel: +31(0) 321 310 043
E-mail: [email protected]
WWW.NITEK.NET
TECHNICAL SPECIFICATION
Network Transmission Device
Network Port Four RJ45 Connectors
Power Connector
LED Indicators
PoE Compliance
PoE Output
Max Operating Distance
DC Voltage Input
Operating Temperature
2.5mm (ID) x 5.5mm (OD) Barrel
Link Status, Power, PoE out, 10Mb or 100Mb
IEEE 802.3af & IEEE 802.3at
45 Watts total output power
With a 1A/48Vdc included power supply
2,000 ft / 600 m
48 to 56Vdc, 1 to 5A
-40° to 75° C / -40° to 167° F
Dimensions 1.0” x 4.0” x 4.9” including tabs & BNC
(25 124mm)
Mounting Hole 0.20” Diameter (5.0mm)
Shipping Dimensions
Shipping Weight
3.0” x 6.9” x 9.7” (76 x 175 x 246mm)
2.0lbs (0.91kg)
Common Installation Type
Up To 600 Meters Of Cable