WARRIOR Item 90976-UPC 792363909761 Grinder Brush Kit, 7 Pc. Owner's Manual
Add to my manuals
1 Pages
WARRIOR Item 90976-UPC 792363909761 is a versatile accessory kit designed for use with angle grinders. It includes a variety of wire cup brushes and wheels for roughening, deburring, cleaning, rust and paint removal, and weld spatter and corrosion removal. The kit also features adapters for connecting the brushes and wheels to your grinder, and a wire brush with a wooden handle for added control. With a maximum RPM of 12,500, this kit is a powerful tool for a variety of tasks.
advertisement
Grinder Brush Kit
Safety Warnings and Instructions
MAX. RPM = 12,500
5 /
″
x 11 TPI Arbor
These wheels and brushes, made from crimped carbon steel wire, are to be used with an appropriate angle grinder. They can be used for roughening, deburring, cleaning prior to welding, rust and paint removal, and weld spatter and corrosion removal.
5 /
8
5 /
8
The set includes the following:
3 ″ x 21 /
4
3 ″ x 21 /
4
4 ″ x 3 /
4
4 ″ x 3 /
4
″ Knotted Wire Cup Brush
″ Crimped Wire Cup Brush
″ Cable Twist Wire Wheel
″ Stringer Bead Wire Wheel
″ to M10-1.25 Adapter
″ to M10-1.50 Adapter
4x16 Row Wire Brush with Wood Handle
IMPORTANT SAFETY WARNINGS
1. Always wear ANSI approved safety goggles, full face shield and respirator when working with these tools.
2. BEFORE use, read and adhere to all warnings, safety precautions, and operating instructions in the owner’s manual for the appropriate angle grinder these accessories are to be used with.
3. The brush and wheel bristles are very sharp and can easily cause skin cuts and puncture wounds; be extremely careful when unpacking these products and when handling and using the wheels and brushes. Always wear gloves when handling and using these wire brushes.
4. Exposure to aluminum oxide (a dust generated from material removing processes) can result in eye, skin and breathing irritation. Always use a NIOSH (National
Institute for Occupational Safety and Health) approved respirator and safety goggles. Avoid skin exposure. Proper ventilation in the work area is required.
5. Never exceed the 12,500 RPM maximum.
Record Product’s Serial Number Here:
Note: If product has no serial number, record month and year of purchase instead.
Note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. Specify UPC 792363909761 when ordering parts.
Copyright ©
26541 Agoura Road, Calabasas, CA 91302
2021 by Harbor Freight Tools ® . All rights reserved. No portion of this sheet may be reproduced in any shape or form without the express written consent of
Harbor Freight Tools.
For technical questions and replacement parts, please call 1-888-866-5797.
Thank you for choosing a Harbor Freight Tools product.
Save the receipt and these instructions. It is important that you read this entire instruction sheet to become familiar with these products before you begin using them.
SAVE THESE WARNINGS.
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement