advertisement
INSTALLATION
12C
COMPACT ELECTRIC STRIKE
The 12C Compact Electric Strike is one of the smallest and most versatile strikes in the world today and is suitable for all types of door frames. Designed to replace the mechanical strike plate.
Minimal effort is required when installing the unit and the compact size assists with maintaining the integrity and strength of the door frame.
The 12C can be mounted on the right or left hand side of a frame and operates in Fail-Secure mode only. The compact strike is exclusively designed to retrofit “T” Strike applications.
WIRING AND CURRENT DRAW
The control circuit for the door strike is not polarity sensitive.
~90mA @ 12VDC current draw.
Continuously rated solenoid.
NOTE: The product must not be installed in applications where it will be exposed to wind and weather (external gates etc.).
METAL FRAME DIMENSIONS
WOOD FRAME
IS12C
DOOR LATCH POSITION
As drawn in the diagram, there should be a 1mm gap between the door latch and the front face of the strike keeper, preventing the door from creating back pressure on the strike keeper when the door is closed.
This gap is important to ensure the proper functioning of the strike.
© 2021 dormakaba Canada Inc www.dormakaba.us • Phone: 1.800.265.6630 • Fax: 1.800.482.9795 • E-mail: [email protected]
PCN2026
R02-21GR-1
advertisement
Related manuals
advertisement