Krone EzBA Hydraulisch klappbare Seitenschutze (B155) Supplement To Operating Instructions
Add to My manuals12 Pages
advertisement
Enclose this document with the operating instructions of the machine.
Supplement to Operating
Instructions
Document no.: 150000908_00_en
EasyCut F 320 CR , EasyCut F 360 CR
with accessories kit: Hydraulically folding side guards
Contact
Maschinenfabrik Bernard Krone GmbH & Co. KG
Heinrich-Krone-Straße 10
48480 Spelle
Germany
Phone main office
Fax main office
Fax spare part storage national territory
Fax spare part storage export
Internet
+ 49 (0) 59 77/935-0
+ 49 (0) 59 77/935-339
+ 49 (0) 59 77/935-239
+ 49 (0) 59 77/935-359 www.landmaschinen.krone.de
Information for enquiries and orders
Year
Machine no.
Type
Contact data of your dealer
2
EasyCut F 320 CR , EasyCut F 360 CR
Supplement to Operating Instructions 150000908_00_en
Contents
EasyCut F 320 CR , EasyCut F 360 CR
Supplement to Operating Instructions 150000908_00_en 3
1
1.1
1
Information on this document
Validity
Information on this document
1.1
Validity
This document is valid for
Machine type:
Accessories kit:
EasyCut F 320 CR
EasyCut F 360 CR
Hydraulically folding side guards
1.2
1.3
Re-ordering
If this document should become wholly or partically unusuable, you can obtain replacement operating instructions by stating the document number given on the cover sheet.
Applicable documents
To ensure that the machine is used safely and as intended, observe the following further applicable documents.
• Operating instructions of the respective machine
4
EasyCut F 320 CR , EasyCut F 360 CR
Supplement to Operating Instructions 150000908_00_en
2
2.1
Safety
Meaning of the supplement to the operating instructions
2
2.1
Safety
WARNING
Risk of injury due to non-observance of relevant safety instructions
If the relevant safety instructions are not observed, persons may be seriously injured or killed.
In order to avoid accidents, the relevant safety instructions in the operating instructions must be read and observed.
WARNING
Risk of injury due to non-observance of safety routines
If the relevant safety routines are not observed, persons may be seriously injured or killed.
In order to avoid accidents, the safety routines in the operating instructions must be read and observed.
INFORMATION
Depending on the machine type, the basic safety instructions can be found in the chapter
“Safety”, “Basic Safety Instructions” or in the chapter “Safety” of the machine operating instructions.
Meaning of the supplement to the operating instructions
The supplement to the operating instructions is an important document and a part of the machine. It is aimed at the user and contains safety-relevant information.
If the supplement to the operating instructions is not observed, people may be seriously injured or killed.
Read in full and observe the “Safety” chapter of the corresponding operating instructions
before using the machine for the first time, refer to page 4 .
Before working, also read and observe the respective sections of the corresponding operating instructions,
.
Keep the supplement to the operating instructions ready to hand for the user of the machine.
Hand over the supplement to the operating instructions to subsequent users.
EasyCut F 320 CR , EasyCut F 360 CR
Supplement to Operating Instructions 150000908_00_en 5
3
3.1
3
Start-up
Connecting hydraulic hoses
Start-up
WARNING
Risk of injury due to non-compliance with the operating instructions
If the operating instructions are not followed, people may be seriously injured or killed.
Read and observe the operating instructions to avoid accidents.
3.1
Connecting hydraulic hoses
KMG000-076
Depressurise the tractor hydraulics.
Shut down and safeguard the machine, refer to the Safety chapter in the operating instructions, “Shutting Down and Safeguarding the Machine”.
Clean and dry the connections of the quick couplings.
Connect the hydraulic hoses (2+/2-) to a double-acting control unit on the tractor, with the locking device in neutral position.
6
EasyCut F 320 CR , EasyCut F 360 CR
Supplement to Operating Instructions 150000908_00_en
4
4.1
Operation
Folding down side guard (working position)
4
4.1
Operation
WARNING
Risk of injury due to non-compliance with the operating instructions
If the operating instructions are not followed, people may be seriously injured or killed.
Read and observe the operating instructions to avoid accidents.
Folding down side guard (working position)
KMG000-079
ü The machine is in the working position.
Unlock the control unit of the tractor.
WARNING! Crushing hazard when folding down the side guards! Before folding down the side guards ensure that there is no one in the danger zone.
Actuate the double-acting control unit (2-) until the side guards (1) are folded down.
Shut down and safeguard the machine, refer to the Safety chapter in the operating instructions, “Shutting Down and Safeguarding the Machine”.
Secure the guard cloths using the turnlock fasteners (2).
EasyCut F 320 CR , EasyCut F 360 CR
Supplement to Operating Instructions 150000908_00_en 7
4
4.2
4.2
Operation
Folding up side guard (transport position)
Folding up side guard (transport position)
KMG000-080
ü The machine is in the working position.
Shut down and safeguard the machine, refer to the Safety chapter in the operating instructions, “Shutting Down and Safeguarding the Machine”.
Open the turnlock fasteners (2).
Actuate the double-acting control unit (2+) until the side guards (1) are folded up.
Lock the control unit of the tractor.
8
EasyCut F 320 CR , EasyCut F 360 CR
Supplement to Operating Instructions 150000908_00_en
5
5.1
Driving and Transport
Preparing machine for road travel
5
5.1
Driving and Transport
WARNING
Risk of injury due to non-compliance with the operating instructions
If the operating instructions are not followed, people may be seriously injured or killed.
Read and observe the operating instructions to avoid accidents.
Preparing machine for road travel
KMG000-057
ü For the “hydraulically folding side guards” version: The side guards (1) are folded up.
EasyCut F 320 CR , EasyCut F 360 CR
Supplement to Operating Instructions 150000908_00_en 9
Index
A
Applicable documents .......................................... 4
C
Connecting hydraulic hoses ................................. 6
Contact ................................................................. 2
Contact data of your dealer .................................. 2
D
Driving and Transport ........................................... 9
F
Folding down side guard (working position) ......... 7
Folding up side guard (transport position) ............ 8
I
Information for enquiries and orders .................... 2
Information on this document ............................... 4
M
Meaning of the supplement to the operating
instructions ........................................................... 5
O
Operation.............................................................. 7
P
Preparing machine for road travel ........................ 9
R
Re-ordering .......................................................... 4
S
Safety ................................................................... 5
Start-up................................................................. 6
V
Validity .................................................................. 4
10
EasyCut F 320 CR , EasyCut F 360 CR
Supplement to Operating Instructions 150000908_00_en
This page has been left blank deliberately.
EasyCut F 320 CR , EasyCut F 360 CR
Supplement to Operating Instructions 150000908_00_en 11
Maschinenfabrik
Bernard Krone GmbH & Co. KG
* Heinrich-Krone-Straße 10
D-48480 Spelle
* Postfach 11 63
D-48478 Spelle
' +49 (0) 59 77 / 935-0
6 +49 (0) 59 77 / 935-339
ü
www.landmaschinen.krone.de
advertisement
Related manuals
advertisement