Acer X193HQ Monitor User Manual
Add to my manuals
23 Pages
Acer X193HQ is a high-performance LCD monitor with a 19-inch widescreen display, delivering stunning visuals and exceptional image quality. Equipped with a resolution of 1440 x 900 pixels and a rapid 5ms response time, it offers sharp images and smooth video playback. The monitor features dual inputs, including a 15-pin D-Sub connector and a DVI-D port, providing versatile connectivity options for various devices.
advertisement
TABLE OF CONTENTS
Special notes on LCD monitors .................................................. 1
Information for your safety and comfort .................................. 2
Unpacking ................................................................................... 5
Attaching/Removing the base .................................................... 6
Screen position adjustment ........................................................ 6
Connecting the power cord ....................................................... 7
Safety precaution ....................................................................... 7
Cleaning your monitor ............................................................... 7
Power saving ............................................................................... 8
DDC .............................................................................................. 8
Connector Pin Assignment ......................................................... 9
Standard Timing Table..................................................................11
Installation.....................................................................................12
User controls..................................................................................13
How to adjust a setting................................................................14
Troubleshooting............................................................................19
X193HQ
SPECIAL NOTES ON LCD MONITORS
The following symptoms are normal with LCD monitor and do not indicate a problem.
NOTES
· Due to the nature of the fluorescent light, the screen may flicker during initial use. Turn off the Power Switch and then turn it on again to make sure the flicker disappears.
· You may find slightly uneven brightness on the screen depending on the desktop pattern you use.
· The LCD screen has effective pixels of 99.99% or more. It may include blemishes of 0.01% or less such as a missing pixel or a pixel lit all of the time.
· Due to the nature of the LCD screen, an afterimage of the previous screen may remain after switching the image, when the same image is displayed for hours. In this case, the screen is recovered slowly by changing the image or turning off the Power Switch for hours.
EN-1
X193HQ
Information for your safety and comfort
Safety instructions
Read these instructions carefully. Keep this document for future reference. Follow all warnings and instructions marked on the product.
CAUTION for accessibility
Be sure that the power outlet you plug the power cord into is easily accessible and located as close to the equipment operator as possible. When you need to disconnect power to the equipment, be sure to unplug the power cord from the electrical outlet.
Warnings
•
•
•
•
•
•
Do not use this product near water.
Do not place this product on an unstable cart, stand or table. If the product falls, it could be seriously damaged.
Slots and openings are provided for ventilation to ensure reliable operation of the product and to protect it from overheating. These openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug or other similar surface. This product should never be placed near or over a radiator or heat register, or in a built-in installation unless proper ventilation is provided.
Never push objects of any kind into this product through cabinet slots as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind onto or into the product.
To avoid damage of internal components and to prevent battery leakage, do not place the product on a vibrating surface.
Never use it under sporting, exercising, or any vibrating environ ment which will probably cause unexpected short current or damage rotor devices, HDD,
Optical drive, and even exposure risk from lithium battery pack.
Safe listening
•
•
•
•
Follow these instructions, suggested by hearing experts,to protect your earing.
• Gradually increase the volume until you can hear it clearly and comfortably and without distortion.
After setting the volume level, do not increase it afteryour ears adjust.
Limit the amount of time listening to music at high volume.
Avoid turning up the volume to block out noisy surroundings.
Turn the volume down if you can’t hear people speaking near you.
EN-2
X193HQ
Product servicing
•
•
•
•
•
Do not attempt to service this product yourself, as opening or removing covers may expose you to dangerous voltage points or other risks. Refer all servicing to qualified service personnel.
Unplug this product from the wall outlet and refer servicing to qualified service personnel when:
• the power cord or plug is damaged, cut or frayed liquid was spilled into the product the product was exposed to rain or water the product has been dropped or the case has been damaged the product exhibits a distinct change in performance, indicating a need for service the product does not operate normally after following the operating instructions
-----------------------------------------------------------------------------------------------------
Note: Adjust only those controls that are covered by the operating instructions, since improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to normal condition.
LCD Pixel Statement
The LCD unit is produced with high-precision manufacturing techniques. Nevertheless, some pixels may occasionally misfire or appear as black or red dots. This has no effect on the recorded image and does not constitute a malfunction.
Tips and information for comfortable use
Computer users may complain of eyestrain and headaches after prolonged use. Users are also at risk of physical injury after long hours of working in front of a computer. Long work periods, bad posture, poor work habits, stress, inadequate working conditions, personal health and other factors greatly increase the risk of physical injury.
Incorrect computer usage may lead to carpal tunnel syndrome, tendonitis, tenosynovitis or other musculoskeletal disorders. The following symptoms may appear in the hands, wrists, arms, shoulders, neck or back:
•
•
•
•
• numbness, or a burning or tingling sensation aching, soreness or tenderness pain, swelling or throbbing stiffness or tightness coldness or weakness
If you have these symptoms, or any other recurring or persistent discomfort and/or pain related to computer use, consult a physician immediately and inform your company’s health and safety department.
The following section provides tips for more comfortable computer use.
Finding your comfort zone
•
•
Find your comfort zone by adjusting the viewing angle of the monitor, using a footrest, or raising your sitting height to achieve maximum comfort. Observe the following tips:
• refrain from staying too long in one fixed posture avoid slouching forward and/or leaning backward stand up and walk around regularly to remove the strain on your leg muscles
EN-3
X193HQ
•
•
•
• take short rests to relax your neck and shoulders avoid tensing your muscles or shrugging your shoulders install the external display, keyboard and mouse properly and within comfort able reach if you view your monitor more than your documents, place the display at the center of your desk to minimize neck strain
Taking care of your vision
•
•
•
•
Long viewing hours, wearing incorrect glasses or contact lenses, glare, excessive room lighting, poorly focused screens, very small typefaces and low-contrast displays could stress your eyes. The following sections provide suggestions on how to reduce eyestrain.
Eyes
Rest your eyes frequently.
Give your eyes regular breaks by looking away from the monitor and focusing on a distant point.
Blink frequently to keep your eyes from drying out.
•
•
•
Display
•
•
Keep your display clean.
Keep your head at a higher level than the top edge of the display so your eyes point downward when looking at the middle of the display.
Adjust the display brightness and/or contrast to a comfortable level for enhanced text readability and graphics clarity.
Eliminate glare and reflections by:
• placing your display in such a way that the side faces the window or any light source
• minimizing room light by using drapes, shades or blinds
• using a task light
• changing the display’s viewing angle
• using a glare-reduction filter
• using a display visor, such as a piece of cardboard extended from the display’s top front edge
Avoid adjusting your display to an awkward viewing angle.
Avoid looking at bright light sources, such as open windows, for extended periods of time.
Developing good work habits
•
•
•
•
Develop the following work habits to make your computer use more relaxing and productive:
Take short breaks regularly and often.
Perform some stretching exercises.
Breathe fresh air as often as possible.
Exercise regularly and maintain a healthy body.
-----------------------------------------------------------------------------------------------------
Warning! We do not recommend using the product on a couch or bed. If this is unavoidable, work for only short periods, take breaks regularly, and do some stretching exercises.
-----------------------------------------------------------------------------------------------------
For more information and help in recycling, please visit the following websites:
Worldwide: http://www.acer-group.com/public/Sustainability/sustainability01.htm
http://www.acer-group.com/public/Sustainability/sustainability0 4 .htm
EN-4
X193HQ
UNPACKING
Please check the following items are present when you unpack the box, and save the packing materials in case you will need to ship or transport the monitor in future.
· LCD Monitor
· 15-pin D-Sub Cable · DVI Cable
(Only Dual-Input Model)
· AC Power Cord
· User Manual · Quick Start Guide
X193HQ
· Audio Cable
Audio Model)
P/N:MU.LEF00.001
Acer Montior X1 93H Q
EN-5
X193HQ
Attaching / Removing the Base
Install:
Align the release button on the bottom of the monitor with the corresponding slots on the bottom of the base.
Remove:
Depress the release button as indicated first before removing the base and follow the arrow direction to remove it.
SCREEN POSITION ADJUSTMENT
In oder to optimize the best viewing position, you can adjust the tilt of the monitor by using both of your hands to hold the edges of the monitor as shown in the figure below.
The monitor can be adjusted to 15 degrees up or 5 degrees down as indicated by arrow below.
EN-6
X193HQ
CONNECTING THE POWER CORD
· Check first to make sure that the power cord you use is the correct type required for your area.
· This monitor has a universal power supply that allows operation in either
100/120V AC or 220/240 V AC voltage area. No user-adjustment is required.
· Plug one end of the power cord to the AC Inlet, plug another end to a proper AC outlet.
· For unit using at 120 V AC:
Use a UL Listed Cord Set, Type SVT wire and plug rated 10 A/125 V.
· For unit using at 220/240 V AC (outside of U.S.):
Use a Cord Set consisting of H05VV-F cord and plug rated 10 A, 250 V. The cord set should have the appropriate safety approvals for the country in which the equipment will be installed.
SAFETY PRECAUTION
· Avoid placing the monitor, or any other heavy object, on the power cord to avoid damage to the cable.
· Do not expose the monitor to rain, excessive moisture, or dust.
· Do not cover the ventilation slots or openings of the monitor. Always put the monitor in a place where there is adequate ventilation.
· Avoid placing the monitor against a bright background or where sunlight or other light sources may reflect on the face of the monitor. Place the monitor just below eye level.
· Handle with care when transporting the monitor.
· Refrain from giving shock or scratch to the screen, as screen is fragile.
CLEANING YOUR MONITOR
Please carefully follow the below guidelines when cleaning the monitor.
· Always unplug the monitor before cleaning.
· Use a soft cloth to wipe the screen and cabinet front and sides.
EN-7
X193HQ
Power saving
The monitor will be driven into Power Saving” mode by the control signal from the display controller, as indicated by the amber-color power LED.
State
LED
Light
Blue ON
Power Saving
Mode
Amber
The power saving states will be kept until a control signal has been detected or the keyboard or mouse is activated. The recovery time from Active OFF state back to ON state is around 3 seconds.
DD C
To make your installation easier, the monitor is able to Plug and Play with your system if your system also supports DDC protocol. The DDC (Display
Data Channel) is a communication protocol through which the monitor automatically informs the host system about its capabilities, for example, supported resolutions and corresponding timing. The monitor supports
DDC2B standard.
EN-8
CONNECTOR PIN ASSIGNMENT
X193HQ
15-Pin Color Display Signal Cable
PIN NO.
1.
2.
3.
4.
5.
6.
7.
8.
DESCRIPTION
Red
Green
Blue
Monitor Ground
DDC-return
R-Ground
G-Ground
B-Ground
PIN NO.
9.
10.
11.
12.
13.
14.
15.
DESCRIPTION
+5V
Logic Ground
Monitor Ground
DDC-Serial Data
H-Sync
V-Sync
DDC-Serial Clock
EN-9
X193HQ
3.
4.
5.
6.
7.
PIN
1.
2.
8.
9.
10.
11.
12.
24-Pin Color Display Signal Cable
Meaning
TMDS Data2-
TMDS Data2+
TMDS Data 2/4
Shield
TMDS Data4-
TMDS Data4+
DDC Clock
PIN
13.
14.
15.
16.
17.
18.
DDC Data 19.
Meaning
TMDS Data3+
+5V Power
GND(return for
+5V hsync.vsync)
Hot Plug Detect
TMDS Data0-
TMDS Data0+
TMDS Data 0/5
Shield
Analogue Vertical
Sync
TMDS Data1-
TMDS Data1+
TMDS Data 1/3
Shield
TMDS Data3-
20.
21.
22.
23.
24.
TMDS Data5-
TMDS Data5+
TMDS Clock Shield
TMDS Clock+
DDC TMDS Clock-
EN-10
X193HQ
Standard Timing Table
To reduce the need for adjustment for different modes, the monitor has default setting modes that are most commonly used as given in the table below. For optimum adjustment, the user is suggested to perform the
Auto Setup under Windows “Full Screen“ pattern or using the pattern in the floppy disk provided. When none of the mode is matched, the user can store their preferred modes in the user modes. The monitor is capable of storing up to 9 user modes. The only condition to store as a user mode is the new display information must have 1 KHz difference for horizontal frequency or 1 Hz for vertical frequency or the sync signal polarities are different from the default modes.
Mode
1 VGA
2 VGA
3 MAC
4 VESA
5 VESA
6
7 VESA
8 VESA
9 VESA
10 VESA
11 MAC
12 VESA
13 VESA
14 VESA
15 VESA
16 VESA
17
18
VESA
VESA
Resolution
720 x 400 70 Hz
640 x 480 59.94 Hz
640 x 480 66.66 Hz
640 x 480 72 Hz
640 x 480 75 Hz
648 x 500 57.7 Hz
800 x 600 56.25 Hz
800 x 600 60 Hz
800 x 600
800 x 600
72 Hz
75 Hz
832 x 624 74.55 Hz
1024 x 768 60 Hz
1024 x 768 70 Hz
1024 x 768 75 Hz
1152 x 864 75 Hz
1280 x 1024 60 Hz
1280 x 1024 75 Hz
1 36 6 x 768 60 Hz
EN-11
X193HQ
INSTALLATION
To install the monitor to your host system, please follow the steps as given below:
Steps
1. 1-1 Connect Video Cable a. Make sure both the monitor and computer are powered-OFF.
b. Connect the VGA video cable to the computer.
1-2 Digital Cable (Only Dual-Input Model) a. Make sure both the monitor and computer are powered-OFF.
b. Connect one end of the 24-pin DVI cable to the back of the monitor and connect the other end to the computer’s port.
2. Connect power cord
Connect the power cord to the monitor, then to a properly grounded AC outlet.
3. Power-ON Monitor and Computer
Power-ON the monitor first, then power-ON the computer.
This sequence is very important.
4. If the monitor still does not function properly, please refer to the troubleshooting section to diagnose the problem.
EN-12
X193HQ
USER CONTROLS
3 4 6 5 5 1 2
Front Panel Controls
1.Power Switch:
To turn ON or OFF the power.
2.Power LED:
Lights up to indicate the power is turned ON.
3.Empowering / Exit:
1) When OSD menu is in active status, this button will act as EXIT-KEY(EXIT
OSD menu).
2) When OSD menu is in off status, press this button to select scenario mode.
4.Auto Adjust button / Exit:
1)When OSD menu is in active status, this button will act as EXIT-KEY (EXIT
OSD menu).
2)When OSD menu is in off status, press this button for 2 seconds to activate the AutoAdjustment function.The Auto Adjustment function is used to set the HPos, VPos, Clock and Focus.
5.< / >
1) Press < or > to select the desired function.Press < or > to change the settings of the current function.
2) Press < or > to adjust the volume up or down (Only for Audio).
6.MENU / ENTER:
Activate OSD menu when OSD is OFF or activate/de-activate adjustment function when OSD is ON.
EN-13
X193HQ
HOW TO ADJUST A SETTING
1. Press the MENU-button to activate the OSD window.
2. Press < or > to select the desired function.
3. Press the MENU-button to select the function that you want to adjust.
4. Press < or > to change the settings of the current function.
5. To exit and save, select the exit function. If you want to adjust any other function, repeat steps 2-4.
· P/X Series OSD behave
When user press “MENU” button on front bezel
A
B
A .
B .
Acer eColor Management
If selected to “Acer eColor Management “ item, will appear the
Acer eColor” OSD
USER
If selected to “USER” item, will appear the Standard OSD
I. Only Analog Input Model
EN-14
II. Only Dual Input Model
X193HQ
·
A.
ADJUSTING THE PICTURE
The descriptions for function control LEDS
Acer eColor Management
Main
Menu icon
Sub
Menu icon
Sub
Menu item
Description
N/A
N/A
N/A
N/A
N/A
Text mode
Standard mode
Optimal balance of brightness and contrast prevent eyestrain. The most comfortable way to read onscreen text
D efault Setting. Reflects native display capability
Grahpic mode
Enhances colors and emphasize fine detail
Movie mode
Displays scenes in clearest detail. Pictures and photographs appear in vibrant colors with sharp detail)
B.
Main
Menu icon
USER
Sub
Menu icon
Sub
Menu item
Description
Contrast
Adjust the contrast between the foreground and background of the screen image
Brightness
ACM
Focus
Adjust the background brightness of the screen image
ACM (Adaptive Contrast Management)A
CM ON/OFF Switch, default "OFF"
Adjust picture Focus
(available in analog mode only)
Clock
Adjust picture Clock
(available in analog mode only)
EN-15
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
Main
Menu
Icon
X193HQ
Sub
Menu
Icon
N/A
N/A
Sub Menu
Item
H. Position
V. Position
Warm
Cool
Description
Adjust the horizontal position.
(available in Analog mode only)
Adjust the vertical position. (available in Analog mode only)
Set the color temperature to warm white.
Set the color temperature to cool white.
User /Red
Adjusts Red/Green/Blue intensity.
User /Green
User /Blue
English
Deutsch
Francais
Espanol
Italiano
Suomi
Nederlands
Pyccknn
Multi-language selection.
EMEA version OSD only
EN-16
Main
Menu
Icon
N/A
N/A
X193HQ
Sub
Menu
Icon
Sub Menu
Item
H. Position
Description
Adjust the horizontal position of the OSD.
V. Position Adjust the vertical position of the OSD.
N/A
N/A
N/A
N/A
OSD Timeout Adjust the OSD timeout.
Input Source
Wide Mode
DDC/CI
Information
Reset
Select input signal from D-Sub or DVI-D or
HDMI
Select Wide mode setting for Full screen,
Aspect ratio or 1:1 mode
Turn ON/OFF DDC/CI support
Show the resolution, H/V frequency andinput port of current input timing.
Clear each old status of Autoconfigurationand set the color temperature to Cool.
Exit Save user adjustment and OSD disappear.
EN-17
· Acer eColor Management OSD
X193HQ
· Operation instructions
Acer eColor Management
Step 1: Press “ Key “ to open the Acer eColor Management OSD and access the scenario modes
Step 2: Press “<“ or “>” to select the mode
Step 3: Press “ Auto Key “ to confirm the mode and run Auto Adjust
· Features and Benefits
EN-18
X193HQ
TROUBLESHOOTING
Before sending your LCD monitor for servicing, please check the troubleshooting list below to see if you can self-diagnose the problem.
(VGA Mode)
Problems Current Status Remedy
LED ON · Using OSD, adjust brightness and contrast to maximum or reset to their default settings.
LED OFF
No Picture
· Check the power switch.
· Check if AC power cord is properly connected to the monitor.
LED displays amber color
Abnormal
Picture
Unstable
Picture
Display is missing, center shift, or too small or too large in display size
· Check if video signal cable is properly connected at the back of monitor.
· Check if the power of computer system is
ON.
· Check if the specification of graphics adapter and monitor is in compliance which may be causing the input signal frequency mismatch.
· Using OSD, adjust RESOLUTION, CLOCK,
CLOCK-PHASE, H-POSITION and V-
POSITION with non-standard signals.
· Using OSD, in case of missing full-screen image, please select other resolution or other vertical refresh timing.
· Wait for a few seconds after adjusting the size of the image before changing or disconnecting the signal cable or powering
OFF the monitor.
EN-19
X193HQ
(DVI Mode)
Problems
No Picture
Current Status Remedy
LED ON
LED OFF
· Using OSD, adjust brightness and contrast to maximum or reset to their default settings.
· Check the power switch.
LED displays amber color
· Check if AC power cord is properly connected to the monitor.
· Check if video signal cable is properly connected at the back of monitor.
· Check if the power of computer system is ON.
This product has been shipped enabled for power management: z Activate display’ Sleep mode within 15 minutes of user inactivity. z Activate computer’s Sleep mode within 30 minutes of user inactivity. z Wake the computer from Sleep mode by pushing power button.
EN-20
Acer Incorporated
8F, 88, Sec. 1, Hsin Tai Wu Rd., Hsichih
Taipei Hsien 221, Taiwan
Tel : 886-2-2696-1234
886-2-2696-3535
Declaration of Conformity
We,
Acer Incorporated
8F, 88, Sec. 1, Hsin Tai Wu Rd., Hsichih, Taipei Hsien 221, Taiwan
And,
Contact Person: Mr. Easy Lai, E-mail: [email protected]
Acer Europe SA
Via Cantonale, Centro Galleria 2 6928 Manno Switzerland
Hereby declare that:
Product:
Trade Name:
Model Number:
Series Model Type:
LCD Monitor
Acer
X193HQ
SKU Number: X193HQ xxxx (“x” = 0~9, a ~ z, or A ~ Z)
Is compliant with the essential requirements and other relevant provisions of the following EC directives, and that all the necessary steps have been taken and are in force to assure that production units of the same product will continue comply with the requirements.
EMC Directive 2004/108/EC as attested by conformity with the following harmonized standards:
-. EN55022, AS/NZS CISPR22 Class B.
-. EN55024
-. EN61000-3-2, Class D
-. EN61000-3-3
Low Voltage Directive 2006/95/EC as attested by conformity with the following harmonized standard:
-. EN60950-1
RoHS Directive 2002/95/EC on the Restriction of the Use of certain Hazardous Substances in Electrical and Electronic Equipment:
. The maximum concentration values of the restricted substances by weight in homogenous material are:
Lead 0.1% Polybrominated Biphenyls (PBB’s) 0.1%
Mercury 0.1% Polybrominated Diphenyl Ethers (PBDE’s) 0.1%
Hexavalent Chromium 0.1% Cadmium 0.01%
Directive 2005/32/EC of the European Parliament and of the Council with regard to Ecodesign Requirements.
Year to begin affixing CE marking 2009.
_______________________________
Oct . 21 , 2009
Easy Lai /Manager Date
Regulation, Acer Inc.
Acer America Corporation
333 West San Carlos St., San Jose
CA 95110, U. S. A.
Tel :
254-298-4000
Fax :
254-298-4147 www.acer.com
Federal Communications Commission
Declaration of Conformity
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
The following local Manufacturer /Importer is responsible for this declaration:
18.5” LCD Monitor Product Name:
Main Model Number:
Series Model Number:
X193HQ xxxx
X193HQ xxxx
Name of Responsible Party: Acer America Corporation
Address of Responsible Party: 333 West San Carlos St.
San Jose, CA 95110
U. S. A.
Contact Person:
Phone No.:
Fax No.:
Acer Representative
254-298-4000
254-298-4147
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Key Features
- 47 cm (18.5")
- 1366 x 768 pixels 16:9
- 5 ms 300 cd/m²
- 17 W
Related manuals
Frequently Answers and Questions
What is the maximum resolution of the Acer X193HQ?
What type of inputs does the Acer X193HQ have?
Is the Acer X193HQ VESA mount compatible?
Is the Acer X193HQ Energy Star certified?
advertisement
Table of contents
- 2 Special notes on LCD monitors
- 3 comfort
- 6 Unpacking
- 7 Attaching/Removing the base
- 7 Screen position adjustment
- 8 Connecting the power cord
- 8 Safety precaution
- 8 Cleaning your monitor
- 9 Power saving
- 10 Connector Pin Assignment
- 12 Standard Timing Table
- 13 Installation
- 14 User controls
- 15 How to adjust a setting
- 20 Troubleshooting