Ransomes 69168 / 69169 TurfCat 600 Series Parts Manual

4201280-GB-Rev C
Parts & Maintenance Manual
Turfcat® with ROPS
69168 – Turfcat T628D, 2WD
69169 – Turfcat T628D, 4WD
69175 – Turfcat T628D, 2WD
69176 – Turfcat T628D, 4WD
WARNING
WARNING: If incorrectly used this machine can cause severe
injury. Those who use and maintain this machine should be
trained in its proper use, warned of its dangers and should read
the entire manual before attempting to set up, operate, adjust
or service the machine.
GB
United
Kingdom
When Performance Matters.™
FOREWORD
This manual contains adjustment, maintenance,
troubleshooting instructions and parts list for your new
Jacobsen machine. This manual should be stored with
the equipment for reference during operation.
The serial plate is located on the right frame rail.
Jacobsen recommends you record these numbers below
for easy reference.
Before you operate your machine, you and each operator
you employ should read the manual carefully in its
entirety. By following the safety, operating and
maintenance instructions, you will prolong the life of your
equipment and maintain its maximum efficiency.
If additional information is
Jacobsen Dealer.
11524WILMAR BLVD,
CHARLOTTE, NC 28273
®
PRODUCT OF U.S.A.
kg
A Textron Company
1-800-848-1636 (US)
kW
needed, contact your
Suggested Stocking Guide
To Keep your Equipment fully operational and productive, Jacobsen suggests you maintain a stock of the more
commonly used maintenance items. We have included part numbers for additional support materials and training aids.
To order any of the following material:
1. Write your full name and complete address on your
order form.
2. Explain where and how to make shipment:
❑ UPS
❑ Regular Mail
❑ Overnight
❑ 2nd Day
3. Order by the quantity desired, the part number, and
the description of the part.
4. Send or bring the order to your authorized Jacobsen
Dealer.
Service Parts
Qty.
Part No.
4177262
2198147-01
2721539-01
5001182
Description
Qty.
Engine Oil Filter
Engine Air Filter
Engine Fuel Filter
Pre-Fuel Filter
Part No.
Description
178025
Hydraulic Oil Filter
Service Support Material
Qty. Part No.
Qty. Part No.
Description
4171722 Service Manual
4191628 DVD, Operator Training
4201281 Safety & Operation Manual
4201280 Parts & Maintenance
These are the original instructions verified by
Jacobsen, A Textron Company.
© 2010, Jacobsen, A Textron Company/Textron Innovations Inc.
“All rights reserved, including the right to reproduce this material
or portions thereof in any form.”
en-2
Description
Litho In U.S.A. 5-2012
Proposition 65 Warning
This product contains or emits
chemicals known to State of Cal ifornia
to cause cancer and birth defects or
other reproductive harm.
Table of Contents
1
1.1
1.2
2
2.1
2.2
2.3
2.4
2.5
2.6
2.7
3
3.1
3.2
3.3
3.4
3.5
3.6
4
4.1
4.2
4.3
4.4
4.5
4.6
4.7
4.8
4.9
4.10
4.11
4.12
4.13
4.14
4.15
4.16
4.17
4.18
4.19
4.20
Safety
Operating Safety .................................................. 4
Important Safety Notes .........................................5
Specifications
Product Identification............................................ 6
Kubota D1305-E3B Engine ..................................6
Mower ...................................................................6
Cutting Units .........................................................7
Weights ................................................................7
Accessories & Support Literature .........................7
Declaration of Conformity .....................................8
Adjustments
General............................................................... 10
Parking Brake .....................................................10
Alternator Belt .....................................................11
Rear Wheel Adjustments ....................................11
Traction Pedal ....................................................12
Torque Specification ...........................................13
Maintenance
General............................................................... 14
Engine ................................................................14
Engine Oil ...........................................................14
Air Filter ..............................................................15
Fuel ....................................................................15
Fuel Manager .....................................................16
Hand Primer Pump .............................................17
Bleeding Fuel System ........................................17
Battery ................................................................18
Jump Starting .....................................................18
Charging Battery ................................................18
Hydraulic Hoses .................................................19
Hydraulic Oil and Filter .......................................19
Electrical System ................................................20
Muffler and Exhaust ...........................................20
Tires ...................................................................20
Wheel Mounting Procedure ................................20
Care and Cleaning .............................................21
Radiator ..............................................................21
Storage ...............................................................22
5
5.1
6
6.1
6.2
6.3
7
8
8.1
Troubleshooting
General .............................................................. 23
Maintenance & Lubrication Charts
General .............................................................. 24
Lubrication Chart ................................................24
Maintenance Charts ...........................................25
Notes
Parts Catalog
Table Of Contents .............................................. 27
en-3
1
SAFETY
1
SAFETY
1.1
OPERATING SAFETY ______________________________________________________
! WARNING
EQUIPMENT OPERATED IMPROPERLY OR BY UNTRAINED PERSONNEL CAN BE DANGEROUS.
Familiarize yourself with the location and proper use of all controls. Inexperienced operators should receive instruction
from someone familiar with the equipment before being allowed to operate the machine.
1. Safety is dependent upon the awareness, concern,
and prudence of those who op erate or service the
equipment. Never allow minors to ope rate any
equipment.
11. Never operate equipment that is not in perfect working
order or i s without dec als, guards, shields, discharge
deflectors, or other protective devices securely fastened
in place.
2. It is your responsibility to r ead this manual and all
publications associated with this equipment (Safety &
Operation Manual, Engine Manual, and attachments/
accessories instruction sheets). If the operator
cannot read English it is the owner’s responsibility to
explain the material contained in this manual to them.
12. Never disconnect or bypass any switch.
3.
Learn the proper use of the mac hine, the location and
purpose of all the controls and gauges before you
operate the equipment. Working with unfamiliar
equipment can lead to accidents.
13. Do not change the
overspeed the engine.
engine
governor
setting
or
14. Carbon monoxide in the ex haust fumes can be fat al
when inhaled. Never operate the engine with out proper
ventilation or in an enclosed area.
15. Fuel is highly flammable, handle with care.
16. Keep the engine clean. Allow the engine to cool before
storing and always remove the ignition key.
4.
Never allow anyone to operate or service the machine
or its attachments without proper training and
instructions, or while under the influence of alcohol or
drugs.
17. Disengage all drives and engage p arking brake before
starting the engi ne (motor). Start the engi ne only when
sitting in operator’s seat, never while standing beside
the unit.
5.
Wear all the necessary protective clothing and personal
safety devices to protec t your head, ey es, ears, hands,
and feet. O perate the mac hine only in day light or in
good artificial light.
18. Equipment must comply with the lates t federal, s tate,
and local requirements when driv en or tr ansported on
public roads. Watch out for traffic when c rossing or
operating on or near roads.
6.
Evaluate the ter rain to deter mine what accessories and
attachments are needed to properly and s afely perform
the job. Only use accessories and attachments
approved by Jacobsen.
19. Local regulations may restrict the age of the operator.
7.
Stay alert for holes in the terrain and other hidden
hazards.
8.
Inspect the area where the equipment will be used. Pick
up all the debris you can find before operating. Beware
of overhead obstructions (low tree limbs, electrical
wires, etc.) and also underground obstacles (sprinklers,
pipes, tree roots, etc.). Enter a new area cautiously.
Stay alert for hidden hazards.
21. To prevent tipping or loss of control, do not start or stop
suddenly on slopes. Reduce speed when making sharp
turns. Use caution when changing directions.
9.
Never direct discharge of material toward bystanders,
nor allow anyone near the machine while in operation.
The owner/operator can prevent and is responsible for
injuries inflicted to thems elves, to bystanders, and
damage to property.
10. Do not carry passengers. Keep by standers and pet s a
safe distance away.
20. Operate the machine up and down the face of slopes
(vertically), not across the face (horizontally).
22. Always use the seat belt when oper ating mowers
equipped with a Roll Over Protective Structure (ROPS).
Never use a seat belt when operating mowers without a
ROPS.
Accessory operator protective structures will continue
to be offered for all equipment currently covered. This
allows for the outfitting of any machines without
previous ROPS installations or replacement of
damaged structures.
23. Keep legs, arms, and body inside the
compartment while the vehicle is in motion.
seating
24. Disconnect batteries before perfor ming any welding on
this mower.
This machine is to be operated and maintained as specified in this manual and is intended for the professional
maintenance of specialized turf grasses. It is not intended for use on rough terrain or long grasses.
en-4
SAFETY
1.2
1
IMPORTANT SAFETY NOTES ________________________________________________
This safety alert symbol is used to alert you to potential hazards.
DANGER - Indicates an imminently hazardous situation which, if not avoided, WILL result in death or serious injury.
WARNING - Indicates a potentially hazardous situation which, if not avoided, COULD result in death or serious
injury.
CAUTION - Indicates a potentially hazardous situation which, if not avoided, MAY result in minor or moderate injury
and property damage. It may also be used to alert against unsafe practices.
NOTICE - Indicates a potentially hazardous situation which, if not avoided, MAY result in property damage. It may
also be used to alert against unsafe practices.
For pictorial clarity, some illustrations in this manual may show shields, guards, or plates, open or removed. Under no
circumstances should this equipment be operated without these devices securely fastened in place.
! WARNING
The Interlock System on this mower prevents the mower from starting unless
the PTO switch is OFF and traction pedal is in Neutral. The system will stop
the engine if the operator leaves the seat without traction pedal in Neutral or
setting the PTO switch OFF.
NEVER operate mower unless the Interlock System is working.
! WARNING
1. Before leaving the operator’s position for any reason:
a.
b.
c.
d.
e.
Return traction pedal to Neutral.
Disengage all drives.
Lower all implements to the ground.
Engage parking brake.
Stop engine and remove the ignition key.
2. Keep hands, feet, and clothing away from moving parts. Wait for all
movement to stop before you clean, adjust, or service the machine.
3. Keep the area of operation clear of all bystanders and pets.
4. Never carry passengers, unless a seat is provided for them.
5. Never operate mowing equipment without the discharge deflector
securely fastened in place.
By following all instructions in this manual, you will prolong the life of y our machine and maintain its maximum
efficiency. Adjustments and maintenance should always be performed by a qualified technician.
If additional information or service is needed, contact your Authorized Jacobsen Dealer who is kept informed of th e
latest methods to service this equipment and can provide prompt and efficient service.
en-5
2
2
2.1
SPECIFICATIONS
SPECIFICATIONS
PRODUCT IDENTIFICATION_________________________________________________
69168 .............................. Turfcat T628D 2WD with ROPS
69169 .............................. Turfcat T628D 4WD with ROPS
69175 .............................. Turfcat T628D 2WD with ROPS
69176 .............................. Turfcat T628D 4WD with ROPS
Serial Number ................ An identification plate, like the one
shown, listing the serial number, is
attached to frame behind and to
the left of the traction pedal.
Always provide the serial number of the unit when ordering
replacement parts or requesting service information.
2.2
Note: Actual sustained horsepower will likely be lower
than listed in specifications due to operating limitations
and environmental factors.
Displacement .................. 76.95 cu. In. (1261 cc)
Torque ............................. 59.1 ft lbs. (80.1 Nm) @ 2000 rpm
Fuel:
Type .......................... No. 2 Low or Ultra Low Sulfur
Diesel
Rating ....................... Cetane Rating-45
Capacity .................... 9 U.S. Gal. (34 liters)
kg
21.7
1-800-848-1636 (US)
XXXX
kW
69168001651
Product
EEC
Sound
Power
69168
69169
69175
69176
105 dB(A)
105 dB(A)
105 dB(A)
105 dB(A)
Sound Power Vibration M/S2
Level
Operator Ear Arms Body
93 dB(A)
93 dB(A)
93 dB(A)
93 dB(A)
1.991
1.991
1.991
1.991
0.066
0.066
0.066
0.066
High Idle - rpm ................ 3220 no load
Low Idle - rpm................. 1750 no load
Lubrication:
Capacity.................... 6 qt (5.7 liters)
Type.......................... SAE 10W30
API Classification ..... CD,CE
Air Filter .......................... Dry type with service indicator
Alternator ........................ 40 amp
Cooling System .............. Liquid Cooled
MOWER _________________________________________________________________
Tires
Front ......................... 23 x 10.5-12 4 Ply
Rear .......................... 18 x 8.5-9 4 Ply
Pressure: ........................ 14 psi (1 BAR)
Battery:
Type .......................... 12 Volt Lead/Acid
Group ........................ 45 GMF
Parking Brake ................. Mechanical front wheel drum
en-6
653
A Textron Company
KUBOTA D1305-E3B ENGINE________________________________________________
Make ............................... Kubota
Model .............................. D1305-E3B
Horsepower .................... 29.1 hp (21.7 kW) @3000 rpm
2.3
11524WILMAR BLVD,
CHARLOTTE, NC 28273
®
PRODUCT OF U.S.A.
Speed:
Mow .......................... 0 - 6 mph (9.6 kph)
Transport .................. 0 - 10 mph (16.1 kph)
Reverse .................... 0 - 3 mph (4.8 kph)
Hydraulic System:
Capacity.......................... 6.8 U.S. gal. (25.7 liters) System
Fluid Type ....................... 10W30
Return Filter.................... Full Flow 10 micron
Steering ......................... Hydrostatic Power Steering
Mower Lift ....................... Hand operated, lever controlled
hydraulic lift system
SPECIFICATIONS
2.4
CUTTING UNITS ___________________________________________________________
Caster wheels ................. Two 11 x 4.5 pneumatic, tubeless
4 ply.
Weight Transfer............... Spring transfer 180 lbs. (82 kg)
from cutting deck to mower
Blades/Decks .................. Fine-cut flail, rear discharge, side
discharge or mulcher
Cutting Width .................. 60 in. (1524 mm), 63 in. (1600
mm), or 72 in. (1829 mm)
2.5
Cutting Capacity @ 5.5 mph (9 kph)
60 in. (1524 mm)....... 3.3 acres (1.3 ha)/hr
63 in. (1600 mm)....... 3.5 acres (1.4 ha)/hr
72 in. (1829 mm)....... 4 acres (1.6 ha)/hr
Height-of-cut ................... 1 to 4-3/4 in. (25 to 121 mm) in 1/4
in. (6 mm) increments
WEIGHTS ________________________________________________________________
Dimensions:
Inches
Length ............................................................. 88
Height - Top of ROPS ..................................... 82
Height (Cab installed)................................... 83.5
Wheel Base..................................................... 52
Width (Without Mower).................................... 52
2.6
2
(mm)
(2235)
(2083)
(2121)
(1320)
(1320)
Weights:
Lbs.
(kg)
Without Deck
69168 and 69175 ........................................ 1440 (653)
69169 and 69176 ........................................ 1490 (676)
69168 and 69175 with Cab ......................... 2728 (1237)
69169 and 69176 with Cab ......................... 2778 (1260)
ACCESSORIES & SUPPORT LITERATURE _____________________________________
Contact your area Jacobsen Dealer for a complete listing of accessories and attachments.
! CAUTION
Use of ot her than Jacobsen authorized parts and accessories may cause personal injury or damage to the
equipment and will void the warranty.
Accessories
Air Blow Gun ...........................................................JAC5098
Orange Touch-up Paint (12 oz. spray) .................... 4184140
Canopy........................................................................ 68127
Care Free Deck Tires...............................................2811454
Tie down brackets ......................................................970114
Turn Assist/Steering Brakes.......................................970211
Differential Lock (2WD Only)......................................970116
Exhaust Spark Arrestor ............................................. 148098
Leaf Mulcher ............................................................. 970017
Cab ......................................................................... 4265610
Sun Shades ........................................................................ u
Rotary Brush/Front Blades.................................................. s
Debris Blower .................................................................... H
Counterweight (Standard on 2WD Units).................2192304
Cutting Units
60 in. (1524 mm) Hydraulic Rear Discharge Deck ....956023
63 in. (1600 mm) Hydraulic Side Discharge Deck .....956314
72 in. (1829 mm) Hydraulic Rear Discharge Deck ....957234
72 in. (1829 mm) Hydraulic Side Discharge Deck .....957233
60 in. (1524 mm) Hydraulic Flail Mower ....................956025
Support Literature
Safety & Operation Manual......................................4201281
Parts & Maintenance Manual...................................4201280
Service Manual ........................................................4171722
DVD, Operator Training ...........................................4191628
u Contact:
s Contact:
Sunguard
16930 South Shawnee Heights
Overbrook, KS 66524
Phone 800-899-2406
Fax
(800) 899-2406
H Contact:
M-B Companies, Inc.
1200 Park Street, Box 148
Chilton, WI 53014
Phone: (888) 558-5801
Fax: (920) 898-4588
Buffalo Turbine Agricultural Equipment
180 Zoar Road
Springville, NY 14141
Phone: (716) 592-2700
Fax: (716) 592-2460
en-7
2
SPECIFICATIONS
2.7
DECLARATION OF CONFORMITY ____________________________________________
DECLARATION OF CONFORMITY PROHLÁŠENÍ O SHOD OVERENSSTEMMELSESERKLÆRING CONFORMITEITSVERKLARING VASTAVUSDEKLARATSIOON VAATIMUSTENMUKAISUUSVAKUUTUS DECLARATION DE CONFORMITE KONFORMITÄTSERKLÄRUNG MEGFELELSÉGI NYILATKOZAT DICHIARAZIONE DI CONFORMITÀ ATBILSTBAS
DEKLAR!CIJA ATITIKTIES DEKLARACIJA DIKJARAZZJONI TAL-KONFORMITÀ DEKLARACJA ZGODNO"CI DECLARAÇÃO DE CONFORMIDADE DECLARA#IE DE CONFORMITATE VYHLÁSENIE O ZHODE IZJAVA O
SKLADNOSTI DECLARACIÓN DE CONFORMIDAD DEKLARATION OM ÖVERENSSTÄMMELSE
Business name and full address of the manufacturer Obchodní jméno a plná adresa výrobce Producentens firmanavn og fulde adresse Bedrijfsnaam en volledig adres van de fabrikant Tootja ärinimi ja täielik aadress Valmistajan toiminimi ja täydellinen osoite Nom commercial et adresse complète du fabricant Firmenname und vollständige Adresse des Herstellers !"#$%& #'()*+ !*'*!& A gyártó üzleti neve és teljes címe Ragione sociale e indirizzo completo del fabbricante Uz,-muma nosaukums un pilna ražot/ja adrese Verslo pavadinimas ir pilnas gamintojo adresas Isem kummer0jali u indirizz s1i1 tal-fabbrikant Nazwa firmy i pe3ny adres producenta Nome da empresa e endereço completo do fabricante Denumirea comercial4 5i adresa complet4 a
produc4torului Obchodný názov a úplná adresa výrobcu Naziv podjetja in polni naslov proizvajalca Nombre de la empresa y dirección completa del
fabricante Tillverkarens företagsnamn och kompletta adress
Jacobsen, A Textron Company
11524 Wilmar Blvd.
Charlotte, NC 28273, USA
Product Code ? @
Kód výrobku Produktkode Productcode Toote kood Tuotekoodi Code produit Produktcode E#GL $%MG!%L
69168 and 69175
Termékkód Codice prodotto Produkta kods Produkto kodas Kodi0i tal-Prodott Kod produktu Código do Produto Cod produs Kód výrobku 69169 and 69176
Oznaka proizvoda Código de producto Produktkod
Machine Name Z [ Název stroje Maskinnavn Machinenaam Masina nimi Laitteen nimi Nom de la machine Maschinenbezeichnung ]%* +"&!%L Gépnév Denominazione della macchina Iek/rtas nosaukums Mašinos pavadinimas Isem talMagna Nazwa urz`dzenia Nome da Máquina Numele echipamentului Názov stroja Naziv stroja Nombre de la máquina Maskinens namn
Turfcat 628D 2WD
Turfcat 628D 4WD
Designation {| Ozna}ení Betegnelse Benaming Nimetus Tyyppimerkintä Pažym~jimas Bezeichnung $!+$*GL Megnevezés Funzione Apz€m-jums Lithuanian Denominazzjoni Oznaczenie Designação Specificaie Ozna}enie Namen stroja Descripción Lawnmower, Article 12, Item 32
Beteckning
Serial Number ‚ Sériové }íslo Serienummer Serienummer Seerianumber Valmistusnumero Numéro de série Seriennummer ƒ'$GL $)GL Sorozatszám Numero di serie S-rijas numurs Serijos numeris Numru Serjali Numer seryjny Número de Série Num4r de
serie Sériové }íslo Serijska številka Número de serie Serienummer
6916801651-6916802500
6916801651-6916802500
6917501651-6917502500
6917601651-6917602500
Engine † Motor Motor Motor Mootor Moottori Moteur Motor ‡+"& Modulnév Motore Dzin-js Variklis Sa11a Netta Installata Kubota D1305-E3B Diesel
Silnik Motor Motor Motor Motor Motor Motor
en-8
Net Installed Power Z ˆ ‰istý instalovaný výkon Installeret nettoeffekt Netto geïnstalleerd vermogen Installeeritud
netovõimsus Asennettu nettoteho Puissance nominale nette Installierte Nettoleistung E)$& 'Š!'*!+‹+ *"(L Nettó beépített teljesítmény Potenza netta installata Paredz-t/ t€kla jauda Grynoji galia Wisa’ tal-Qtug1 Moc zainstalowana netto Potência instalada Puterea instalat4 net4 ‰istý inštalovaný výkon Neto vgrajena mo} Potencia instalada neta Nettoeffekt
21,7 kW @ 3000 RPM
Cutting Width | Ší‘ka ‘ezu Skærebredde Maaibreedte Lõikelaius Leikkuuleveys Largeur de coupe Schnittbreite ‡&%L *‹’L Vágási szélesség Larghezza di taglio Griešanas platums Pjovimo plotis Tikkonforma mad-Direttivi Szeroko“” ci•cia Largura de Corte L4imea de t4iere Šírka záberu Širina reza Anchura de corte Klippbredd
1,52 m to 1,83 m
Conforms to Directives – Spl—uje podmínky sm˜rnic Er i overensstemmelse med direktiver Voldoet aan de richtlijnen Vastab direktiividele Direktiivien mukainen Conforme aux directives Entspricht Richtlinien ™%š%)&*!' *!› !L ]#+Š'L Megfelel az irányelveknek
Conforme alle Direttive Atbilst direkt€v/m Atitinka direktyvœ reikalavimus Valutazzjoni tal-Konformità Dyrektywy zwi`zane Cumpre as Directivas Respect4 Directivele Je v súlade so smernicami Skladnost z direktivami Cumple con las Directivas Uppfyller direktiv
2004/108/EC
2006/42/EC
2000/14/EC, 2005/88/EC
2006/66/EC
Conformity Assessment žŸ
Hodnocení pln˜ní podmínek Overensstemmelsesvurdering Conformiteitsbeoordeling Vastavushindamine Vaatimustenmukaisuuden arviointi Evaluation de conformité Konformitätsbeurteilung *!*+ ƒG$¡*+L Megfelel¢ség-értékelés Valutazione della conformità Atbilst€bas nov-rt-jums Atitikties £vertinimas Livell tal-Qawwa tal-¤oss Imkejjel Ocena
zgodno“ci Avaliação de Conformidade Evaluarea conformit4ii Vyhodnotenie zhodnosti Ocena skladnosti Evaluación de conformidad Bedömning av överensstämmelse
2006/42/EC Annex VIII
Measured Sound Power Level ¥ @
ˆ Nam˜‘ený akustický výkon Målte lydstyrkeniveau Gemeten geluidsniveau Mõõdetud helivõimsuse tase Mitattu äänitehotaso Niveau de puissance sonore mesuré Gemessener Schalldruckpegel ƒ!)*‹% ''#% +"+!&L *"(%L Mért hangteljesítményszint Livello di potenza sonora misurato Izm-r€tais ska,as jaudas l€menis Išmatuotas garso stiprumo lygis Livell tal-Qawwa tal-¤oss Iggarantit Moc akustyczna mierzona Nível sonoro medido Nivelul m4surat al puterii
acustice Nameraná hladina akustického výkonu Izmerjena raven zvo}ne mo}i Nivel de potencia sonora medido Uppmätt ljudeffektsnivå
104 dB(A) LWA
Guaranteed Sound Power Level ¨ @
ˆ Garantovaný akustický výkon Garanteret lydstyrkeniveau Gegarandeerd geluidsniveau Garanteeritud helivõimsuse tase Taattu äänitehotaso Niveau de puissance sonore garanti Garantierter
Schalldruckpegel ŠŠ+‹% ''#% +"+!&L *"(%L Szavatolt hangteljesítményszint Livello di potenza sonora garantito Garant-tais ska,as
jaudas l€menis Garantuotas garso stiprumo lygis Livell tal-Qawwa tal-¤oss Iggarantit Moc akustyczna gwarantowana Nível sonoro farantido Nivelul garantat al puterii acustice Garantovaná hladina akustického výkonu Zajam}ena raven zvo}ne mo}i Nivel de potencia sonora garantizado Garanterad ljudeffektsnivå
105 dB(A) LWA
Conformity Assessment Procedure (Noise) žŸ
Ÿ@ (@) Postup hodnocení pln˜ní podmínek (hluk) Procedure for overensstemmelsesvurdering (Støj) Procedure van de conformiteitsbeoordeling (geluid) Vastavushindamismenetlus (müra) Vaatimustenmukaisuuden arviointimenettely (Melu) Procédure d’évaluation de conformité (bruit) Konformitätsbeurteilungsverfahren (Geräusch) #* ™ª%šGŠ+*+L ƒG$¡*+L («G$¬%L) Megfelel¢ség-értékelési eljárás (Zaj) Procedura di valutazione della conformità (rumore) Atbilst€bas nov-rt-juma proced­ra (troksnis) Atitikties £vertinimo proced­ra (garsas) Pro0edura tal-Valutazzjoni tal-Konformità (¤oss) Procedura oceny zgodno“ci (poziom ha3asu) Processo de avaliação de conformidade (nível sonoro) Procedura de evaluare a conformit4ii (zgomot) Postup vyhodnocovania zhodnosti (hluk) Postopek za ugotavljanje skladnosti (hrup) Procedimiento de evaluación de conformidad (ruido) Procedur för bedömning av överensstämmelse (buller)
2000/14/EC Annex VI, Part 1
UK Notified Body for 2000/14/EC Z®Ÿ ž¯ 2000/14/°ž ڑad certifikovaný podle sm˜rnice }. 2000/14/EC Det britiske bemyndigede organ for 2001/14/EF Engels adviesorgaan voor 2000/14/EG Ühendkuningriigi teavitatud asutus direktiivi 2000/14/EÜ
mõistes Direktiivin 2000/14/EY mukainen ilmoitettu tarkastuslaitos Isossa-Britanniassa Organisme notifié concernant la directive 2000/14/CE Britische benannte Stelle für 2000/14/EG E%%%+‹%L ]$Š*GL ²‹% ³*š'% Š 2000/14/E 2000/14/EK – egyesült királyságbeli bejelentett szervezet Organismo Notificato in GB per 2000/14/CE 2000/14/EK AK reµistr-t/ organiz/cija JK notifikuotosios £staigos 2000/14/EC Korp Notifikat tar-Renju Unit g1al 2000/14/KE Dopuszczona jednostka badawcza w Wielkiej Brytanii wg 2000/
14/WE Entidade notificada no Reino Unido para 2000/14/CE Organism notificat în Marea Britanie pentru 2000/14/CE Notifikovaný orgán Spojeného krá¶ovstva pre smernicu 2000/14/ES Britanski priglašeni organ za 2000/14/ES Cuerpo notificado en el Reino Unido para 2000/14/CE Anmält organ för 2000/14/EG i Storbritannien
Number: 1088
Sound Research Laboratories Limited
Holbrook House, Little Waldingfield
Sudbury, Suffolk CO10 0TH
SPECIFICATIONS
Operator Ear Noise Level ž @¸ [@ Hladina hluku v oblasti uší operátora Støjniveau i førers ørehøjde Geluidsniveau oor bestuurder Müratase operaatori kõrvas Melutaso käyttäjän korvan kohdalla Niveau de bruit à hauteur des oreilles de l’opérateur Schallpegel am Bedienerohr '#% )%$(¬% *' š'!%$Š A kezel¢ fülénél mért zajszint Livello di potenza sonora all’orecchio dell’operatore Trokš,a l€menis pie operatora auss Dirban}iojo su mašina patiriamo triukšmo lygis Livell tal-¤oss fil-Widna tal-Operatur Dopuszczalny poziom ha3asu dla operatora Nível sonoro nos ouvidos do operador Nivelul zgomotului la urechea operatorului Hladina hluku pôsobiaca na sluch operátora Raven hrupa pri ušesu upravljavca Nivel sonoro en el oído del operador Ljudnivå vid förarens öra
93 dB(a) Leq (2006/42/EC)
Harmonised standards used ¥ ¸ Použité harmonizované normy Brugte harmoniserede standarder Gebruikte geharmoniseerde standaards Kasutatud ühtlustatud standardid Käytetyt yhdenmukaistetut standardit Normes harmonisées utilisées Angewandte harmonisierte Normen $%*‹ $G! % "$+*%%&)+ Harmonizált szabványok Standard armonizzati applicati Izmantotie saska,otie standarti Panaudoti suderinti standartai Standards armonizzati u¹ati Normy spójne powi`zane Normas harmonizadas usadas
Standardele armonizate utilizate Použité harmonizované normy Uporabljeni usklajeni standardi Estándares armonizados utilizados Harmoniserade standarder som används
BS EN ISO 20643
BS EN ISO 5349-1
BS EN ISO 5349-2
BS EN 836
Technical standards and specifications used ¥ ¸|
Ÿ®
Ÿ Použité technické normy a specifikace Brugte tekniske standarder og specifikationer Gebruikte technische standaards en specificaties Kasutatud tehnilised standardid ja spetsifikatsioonid Käytetyt tekniset standardit ja eritelmät Spécifications et normes techniques utilisées Angewandte technische Normen und Spezifikationen º'"› $G! $%#Š$¡‹L % "$+*%%&)+ M»szaki szabványok és specifikációk Standard tecnici e specifiche applicati Izmantotie tehniskie standarti un specifik/cijas Panaudoti techniniai standartai ir technin~ informacija Standards u spe0ifikazzjonijiet tekni0i u¹ati Normy i specyfikacje techniczne powi`zane Normas técnicas e especificações usadas Standardele tehnice 5i specificaiile utilizate Použité technické normy a špecifikácie Uporabljeni tehni}ni standardi in specifikacije Estándares y especificaciones técnicas utilizadas Tekniska standarder och specifikationer som används
B71.4
ISO 2631-1
OSHA 1928.51
The place and date of the declaration ¼ Ÿ Místo a datum prohlášení Sted og dato for erklæringen Plaats en datum van de verklaring Deklaratsiooni väljastamise koht ja kuupäev Vakuutuksen paikka ja päivämäärä Lieu et date de la déclaration Ort und Datum der Erklärung ºG%L +'$%+ #&š*+L A nyilatkozat kelte (hely és id¢) Luogo e data della dichiarazione Deklar/cijas vieta un datums Deklaracijos vieta ir data Il-post u d-data tad-dikjarazzjoni Miejsce i data wystawienia deklaracji Local e data da
declaração Locul 5i data declaraiei Miesto a dátum vyhlásenia Kraj in datum izjave Lugar y fecha de la declaración Plats och datum för
deklarationen
Jacobsen, A Textron Company
11524 Wilmar Blvd.
Charlotte, NC 28273, USA
May 29, 2012
Signature of the person empowered to draw up the declaration on behalf of the manufacturer, holds the technical documentation and is authorised to
compile the technical file, and who is established in the Community.
{ |
, @ˆ Ÿ , ½ ¾ˆ ¸|
@Ÿ ¸|
®½ ¯ˆ.
Podpis osoby oprávn˜né sestavit prohlášení jménem výrobce, držet technickou dokumentaci a osoby oprávn˜né sestavit technické soubory a založené v
rámci Evropského spole}enství.
Underskrift af personen, der har fuldmagt til at udarbejde erklæringen på vegne af producenten, der er indehaver af dokumentationen og er bemyndiget til
at udarbejde den tekniske journal, og som er baseret i nærområdet.
Handtekening van de persoon die bevoegd is de verklaring namens de fabrikant te tekenen, de technische documentatie bewaart en bevoegd is om het
technische bestand samen te stellen, en die is gevestigd in het Woongebied.
Ühenduse registrisse kantud isiku allkiri, kes on volitatud tootja nimel deklaratsiooni koostama, kes omab tehnilist dokumentatsiooni ja kellel on õigus
koostada tehniline toimik.
Sen henkilön allekirjoitus, jolla on valmistajan valtuutus vakuutuksen laadintaan, jolla on hallussaan tekniset asiakirjat, joka on valtuutettu laatimaan
tekniset asiakirjat ja joka on sijoittautunut yhteisöön.
Signature de la personne habilitée à rédiger la déclaration au nom du fabricant, à détenir la documentation technique, à compiler les fichiers techniques et
qui est implantée dans la Communauté.
Unterschrift der Person, die berechtigt ist, die Erklärung im Namen des Herstellers abzugeben, die die technischen Unterlagen aufbewahrt und berechtigt
ist, die technischen Unterlagen zusammenzustellen, und die in der Gemeinschaft niedergelassen ist.
¿%Š$¡& !G% 'ª%*%#%!+‹% Š !+ *(!ª+ !+L #&š*+L ' ‹$%L !% !*'*!&, % %%%L !‹"' !+ !'"& ‹)'*+ ‹"' !+
'ª%*%#G!+*+ !ª%&*' !% !'"G ¡›'š% % %%%L ' #%$*‹%L *!+ E%G!+!.
A gyártó nevében meghatalmazott személy, akinek jogában áll módosítania a nyilatkozatot, a m»szaki dokumentációt ¢rzi, engedéllyel rendelkezik a
m»szaki fájl összeállításához, és aki a közösségben letelepedett személy.
Firma della persona autorizzata a redigere la dichiarazione a nome del fabbricante, in possesso Della documentazione tecnica ed autorizzata a costituire
il fascicolo tecnico, che deve essere stabilita nella Comunità.
T/s personas paraksts, kura ir pilnvarota deklar/cijas sast/d€šanai ražot/ja v/rd/, kurai ir tehnisk/ dokument/cija, kura ir pilnvarota sagatavot tehnisko
reµistru un kura ir apstiprin/ta Kopien/.
Asmuo, kuris yra gana žinomas, kuriam gamintojas suteik~ £galiojimus sudaryti ši` deklaracij`, ir kuris j` pasiraš~, turi vis` technin• informacij` ir yra
£galiotas sudaryti technin~s informacijos dokument`.
Il-firma tal-persuna awtorizzata li tfassal id-dikjarazzjoni f’isem il-fabbrikant, g1andha d-dokumentazzjoni teknika u hija awtorizzata li tikkompila l-fajl
tekniku u li hija stabbilita fil-Komunità.
Podpis osoby upowa¹nionej do sporz`dzenia deklaracji w imieniu producenta, przechowuj`cej dokumentacj• techniczn`, upowa¹nion` do stworzenia
dokumentacji technicznej oraz wyznaczonej ds. wspólnotowych.
Assinatura da pessoa com poderes para emitir a declaração em nome do fabricante, que possui a documentação técnica, que está autorizada a compilar
o processo técnico e que está estabelecida na Comunidade.
Semn4tura persoanei împuternicite s4 elaboreze declaraia în numele produc4torului, care deine documentaia tehnic4, este autorizat4 s4 compileze
dosarul tehnic 5i este stabilit4 în Comunitate.
Podpis osoby poverenej vystavením vyhlásenia v mene výrobcu, ktorá má technickú dokumentáciu a je oprávnená spracovaÀ technické podklady a ktorá
je umiestnená v Spolo}enstve.
Podpis osebe, pooblaš}ene za izdelavo izjave v imenu proizvajalca, ki ima tehni}no dokumentacijo in lahko sestavlja spis tehni}ne dokumentacije, ter ima
sedež v Skupnosti.
Firma de la persona responsable de la declaración en nombre del fabricante, que posee la documentación técnica y está autorizada para recopilar el
archivo técnico y que está establecido en la Comunidad.
Undertecknas av den som bemyndigad att upprätta deklarationen å tillverkarens vägnar, innehar den tekniska dokumentationen och är bemyndigad att
sammanställa den tekniska informationen och som är etablerad i gemenskapen.
Certificate Number Z ®
‰íslo osv˜d}ení Certifikatnummer Certificaatnummer Sertifikaadi number Hyväksyntänumero Numéro de certificat Bescheinigungsnummer ™$)GL Á*!%%+!%( Hitelesítési szám Numero del certificato Sertifik/ta numurs Sertifikato numeris Numru ta0-Âertifikat Numer certyfikatu Número do Certificado Num4r certificat ‰íslo osved}enia Številka certifikata Número de certificado Certifikatsnummer
2
2006/42/EC Annex II 1.A.2
Tim Lansdell
Technical Director
Ransomes Jacobsen Limited
West Road, Ransomes Europark,
Ipswich, IP3 9TT, England
2006/42/EC Annex II 1.A.10
Vasant Godhalekar
VP of Engineering
Jacobsen, A Textron Company
11524 Wilmar Blvd,
Charlotte, NC 28273, USA
4201280 Rev C
GB
BG
CZ
DK
NL
EE
FI
FR
DE
GR
HU
English
български
čeština
dansk
Nederlands
eesti
suomi
français
Deutsch
Ελληνικά
magyar
IT
LV
LT
MT
PL
PT
RO
SK
italiano
latviešu
valoda
lietuvių
kalba
Malki
polski
português
Română
slovenčina
SI
slovenščina
ES
SE
Ελληνικά
Svenska
en-9
3
3
ADJUSTMENTS
ADJUSTMENTS
3.1
GENERAL________________________________________________________________
! WARNING
To prevent injury, lower implements to the ground,
disengage all drives, engage parking brake, stop
engine, and remove key from ignition switch before
making any adjustments or performing maintenance.
Make sure the mower is parked on a solid and level
surface. Never work on a mo wer that is supported
only by the jack. Always use jack stands.
If only the front or rear of the mower is raised, place
chocks in front of and behind the wheels that are not
raised.
1.
Adjustments and maintenance should always be
performed by a quali fied technician. If pr oper
3.2
adjustment cannot be made, contact an authorized
Jacobsen Dealer.
2. Replace, do
components.
not
adjust,
worn
or
damaged
3. Long hair, jewelry, or loose fitting clothing may get
tangled in moving parts.
! CAUTION
Be careful to prevent entrapment of the hands and
fingers between moving and fixed components of the
machine.
4. Do not change governor settings or overspeed the
engine.
PARKING BRAKE _________________________________________________________
If optional turn assist brakes are installed, slide the lock
pin toward the rear and to th e left to lock the p edals
together.
NOTE: The brakes installed on the mower are self
adjusting and should not require adjustment under
normal operating conditions. If linings or brake drums
appear worn or damaged, have them replaced
immediately by an experienced service technician.
1. For maximum braking power, a force of 135 lbs. (61
kg) is required to engage the parking brake.
2. Adjust brake rods on the right and left hand sides so
they both begin brake engagement at the same
time. If adjustment is needed, loosen the lock nut
(A), remove the hairpin and clevis pin (B).
B
C
A
Figure 3A
D
3. Rotate clevis (C) as required.
4. Tighten locknut (A). Assemble clevis pin (B) and
hairpin.
5. Additional adjustment is available at the brake arm if
necessary by tightening nut (D). Front wheels must
be removed before making adjustments at brake
arm.
Figure 3B
en-10
ADJUSTMENTS
3.3
3
ALTERNATOR BELT _______________________________________________________
Depress the be lt at th e center between the crankshaft
and alternator pulleys with a force of 11 lbs. (5 kg). The
belt should deflect approximately 0.2 in. (5 mm).
1. Loosen the pivot bolt at the base of the alternator.
2. Loosen the to p bolt (E) and rotate the al ternator
along the guide to i ncrease or decrease the belt
tension.
E
3. While holding the alternator at this location, tighten
bolt (E).
4. Tighten the pivot bolt.
Figure 3C
5. Verify belt tension and repeat adjustment if required.
3.4
REAR WHEEL ADJUSTMENTS _______________________________________________
To adjust wheel toe-in:
The rear wheels should be 1/8 i n. (3.2 mm) closer
together at the front than at the back of the wheels.
1. Loosen locknuts (F) at ea ch ball joint near the rear
wheels.
F
G
K
J
H
2. Rotate tie r od (G) until the wheel is correctly
positioned.
3. Tighten locknuts (F).
To adjust steering shaft:
Loosen nut (H) and rotate steering shaft in cylinder to
provide full steering right and left. Side of arm (J) should
contact pin (K). Check both sides.
Figure 3D
en-11
3
ADJUSTMENTS
3.5
TRACTION PEDAL_________________________________________________________
NOTE: Stop engine between each step.
1. Lift both right side wheels off the ground.
! WARNING
M
Make sure the mower is parked on a solid and level
surface. Never work on a mo wer that is supported
only by the jack. Always use jack stands.
If only the front or rear of the mower is raised, place
chocks in front of and behind the wheels that are not
raised.
S
L
Figure 3E
Exhaust fumes contain carbon monoxide that is toxic
and can be fatal when inhaled.
N
R
NEVER operate an engine without proper ventilation.
2. Remove ball joint (L) from bracket (M) and let it
hang.
3. Start the engine and check if whe els turn. If whee ls
do not turn, proceed with step 4. If wheels do turn,
adjust hydro:
P
a. Loosen ball joint jam nut (N).
b. Start the engine and adjust bolt (P) until the
wheels stop turning.
c.
Lightly push and pull on bolt (P) to check for play
in spring. Adjust locknut (R) if necessary, to
remove play in spring. Repeat step b if required.
d. Tighten jam nut (N).
e. Stop the engine.
4. Verify the traction pedal is in neutral and neutral
latch is up and prevents pedal movement. If
required, loosen jam nut (S) and adjust ball joint (L)
until hole in ball joint aligns with hole in bracket (M).
Assemble ball joint to bracket.
5. Start engine and check for tire movement. If tires
still turn repeat adjustment.
6. Tighten all nuts that were loosened for adjustment.
en-12
Figure 3F
ADJUSTMENTS
3.6
3
TORQUE SPECIFICATION ___________________________________________________
NOTICE
All torque values included in these charts are approximate and are for reference only. Use of these torque values is
at your sole risk. Jacobsen is not responsible for any loss, claim, or damage arising from the use of these charts.
Extreme caution should always be used when using any torque value.
Jacobsen uses Grade 5 bolts as standard, unless otherwise noted.
AMERICAN NATIONAL STANDARD FASTENERS
AMERICAN NATIONAL STANDARD FASTENERS
SIZE
SIZE
UNITS
GRADE 5
GRADE 8
UNITS
GRADE 5
GRADE 8
#6-32
in-lbs (Nm)
20 (2.3)
–
7/16-14
ft-lbs (Nm)
50 (67.8)
65 (88.1)
#8-32
in-lbs (Nm)
24 (2.7)
30 (3.4)
7/16-20
ft-lbs (Nm)
55 (74.6)
70 (94.9)
#10-24
in-lbs (Nm)
35 (4.0)
45 (5.1)
1/2-13
ft-lbs (Nm)
75 (101.7)
100 (135.6)
#10-32
in-lbs (Nm)
40 (4.5)
50 (5.7)
1/2-20
ft-lbs (Nm)
85 (115.3)
110 (149.2)
#12-24
in-lbs (Nm)
50 (5.7)
65 (7.3)
9/16-12
ft-lbs (Nm)
105 (142.4)
135 (183.1)
1/4-20
in-lbs (Nm)
95 (10.7)
125 (14.1)
9/16-18
ft-lbs (Nm)
115 (155.9)
150 (203.4)
1/4-28
in-lbs (Nm)
95 (10.7)
150 (17.0)
5/8-11
ft-lbs (Nm)
150 (203.4)
195 (264.4)
5/16-18
in-lbs (Nm)
200 (22.6)
270 (30.5)
5/8-18
ft-lbs (Nm)
160 (217.0)
210 (284.8)
5/16-24
in-lbs (Nm)
240 (27.1)
300 (33.9)
3/4-10
ft-lbs (Nm)
170 (230.5)
220 (298.3)
3/8-16
ft-lbs (Nm)
30 (40.7)
40 (54.2)
3/4-16
ft-lbs (Nm)
175 (237.3)
225 (305.1)
3/8-24
ft-lbs (Nm)
35 (47.5)
45 (61.0)
7/8-14
ft-lbs (Nm)
300 (406.8)
400 (542.4)
METRIC FASTENERS
SIZE
UNITS
4.8
5.8
8.8
10.9
12.9
Non Critical
Fasteners
into
Aluminum
M4
Nm (in-lbs)
1.2 (11)
1.7 (15)
2.9 (26)
4.1 (36)
5.0 (44)
2.0 (18)
M5
Nm (in-lbs)
2.5 (22)
3.2 (28)
5.8 (51)
8.1 (72)
9.7 (86)
4.0 (35)
M6
Nm (in-lbs)
4.3 (38)
5.7 (50)
9.9 (88)
14.0 (124)
16.5 (146)
6.8 (60)
M8
Nm (in-lbs)
10.5 (93)
13.6 (120)
24.4 (216)
33.9 (300)
40.7 (360)
17.0 (150)
M10
Nm (ft-lbs)
21.7 (16)
27.1 (20)
47.5 (35)
66.4 (49)
81.4 (60)
33.9 (25)
M12
Nm (ft-lbs)
36.6 (27)
47.5 (35)
82.7 (61)
116.6 (86)
139.7 (103)
61.0 (45)
M14
Nm (ft-lbs)
58.3 (43)
76.4 (55)
131.5 (97)
184.4 (136)
219.7 (162)
94.9 (70)
en-13
4
4
MAINTENANCE
MAINTENANCE
4.1
GENERAL________________________________________________________________
! WARNING
Before you clean, adjust, or repair this equipment,
disengage all drives, lower implements to the ground,
engage parking brake, stop engine, and remove key
from ignition switch to prevent injuries
Make sure the mower is parked on a s olid and level
surface. Never work on a mow er that is supported
only by the jack. Always use jack stands.
1. Adjustment and maintenance should always be
performed by a qualified technician. If proper
adjustments cannot be made, contact an Authorized
Jacobsen Dealer.
2. Inspect the equipment on a regular basis, establish
a maintenance schedule, and keep detailed records.
a. Keep the equipment clean.
4.2
The proper break-in of a ne w engine can make a
considerable difference to the performance and life of the
engine.
Note: The mower is designed to operate and cut most
efficiently at the preset governor setting. Do not change
the engine governor settings or overspeed the engine.
During the break-in period, Jacobsen recommends the
following:
Replace worn or damaged parts before operating
the machine.
d. Keep all fluids at their proper levels.
e. Keep shields in place and all hardware securely
fastened.
f.
Keep tires properly inflated.
3. Long hair, jewelry or loose fitting clothing may get
tangled in moving parts.
4. Use the il lustrations in the Parts Catalog as
reference for the di sassembly and reassembly of
components.
5. Recycle or dispose of al l hazardous materials
(batteries, fuel, lubricants, anti-freeze, etc.)
according to federal, state, or local regulations.
1. During the first 50 hours of operation, a new engine
should be allowed to reach an operating temperature
of at least 140°F (60°C) prior to operation at full load.
2. Check the engine oil level twice daily during the first
50 hours of operation. Higher than normal oil
consumption is not uncommon during the i nitial
break-in period.
3. Change engine oil and oil filter element after first 50
hours of operation.
4. Check and adjust alternator belt.
5. Refer to Section 6.3 and Engine Manual for specific
maintenance intervals.
If the injection pump, injectors, or the fuel system require
service, contact an authorized Jacobsen Dealer.
ENGINE OIL ______________________________________________________________
Check the engine oil at the start of each day, before
starting the engine. If the oil level is low, remove oil filler
cap, and add oil as required.
Perform initial oil change after first 50 hours of operation
and every 100 hours thereafter. See Engine Manual.
en-14
c.
ENGINE _________________________________________________________________
IMPORTANT: A separate Engine Manual, prepared by
the engine manufacturer, is supplied with this mower.
Read the Engine Manual carefully until you are familiar
with the operation and maintenance of the engine.
Proper attention to the engine manufacturer’s
directions will assure maximum service life of the
engine. To order a replacement Engine Manual contact
the engine manufacturer.
4.3
b. Keep all moving parts properly adjusted and
lubricated.
Use only engine oils with API classification CD/CE.
Above 77°F (25°C)
SAE 30W or SAE10W30/10W40
32 to 77°F (0 to 25°C)
SAE 20W or SAE 10W30/10W40
Below 32° (0°C)
SAE10W or SAE 10W30/10W40
MAINTENANCE
4.4
4
AIR FILTER _______________________________________________________________
Do not remove the element for inspection or
cleaning. Unnecessary removal of t he filter increases
the risk of injecting dust and other impurities into the
engine. Refer to Section 6.3 for specific maintenance
intervals.
When service is required, first clean the outside of the
filter housing; then remove the old element as gently as
possible and discard.
2. Inspect the new element. Do not u se a damaged
element and never use an incorrect element.
3. Assemble the new element and make sure it seats
properly.
4. Reassemble cap making sure it seals completely
around the filter housing. Dust evacuator must be
facing down.
5. Check all hoses and air ducts. Tighten hose clamps.
1. Carefully clean the inside of the filter housing without
allowing dust into the air intake.
4.5
FUEL ____________________________________________________________________
Handle fuel with care - it is highly flammable. Use an
approved container, the spout must fit inside the fuel filler
neck. Avoid using cans and funnels to transfer fuel.
! WARNING
Never remove the fuel cap from the fuel tank, or add
fuel, when the engine is running or while the engine is
hot.
Do not smoke when handling fuel. Never fill or drain
the fuel tank indoors.
Do not spill fuel and clean spilled fuel immediately.
• Fill the fuel tank to full mark on fuel gauge.
• Store fuel according to local, state, or federal
ordinances and recommendations from your fuel
supplier.
• Never overfill or allow the tank to become empty.
• Check fuel lines and clamps every 50 hours. Replace
fuel lines and clamps at the first sign of damage.
• Use clean fresh #2 Low or Ultra Low Sulfur Diesel fuel.
Minimum Cetane rating 45. Refer to Engine Manual for
additional information.
Never handle or store fuel containers near an open
flame or any device that may create sparks and ignite
the fuel or fuel vapors.
Be sure to reinstall and tighten fuel cap securely.
en-15
4
MAINTENANCE
4.6
FUEL MANAGER __________________________________________________________
Refer to Section 6.3 for specific maintenance intervals.
E
Before replacing any filter, thoroughly clean the filter
housing and the area around the filter. Dirt must not b e
allowed to enter into fuel system.
D
Bleed the fuel system if the water separater, fuel filter, or
hoses have been removed, or the fuel tank has become
empty.
Water Separater:
This mower is equipped with a fu el separater that traps
the water in the fuel. If the water is not removed from the
fuel system, extensive damage can occur in th e fuel
injection system.
C
The fuel separater can be r emoved from the fuel
manager by holding black grip ring (C) and turning water
separater counter-clockwise.
Water will collect at th e bottom of th e see-through bowl
(A) and appear a different color than the fuel. To drain
water from the water separater:
A
1. Place a small container under drain valve (B).
2. Open drain valve (B) and a llow the wa ter to dr ain
into the container.
3. Retighten drain valve and clean up any spilled fuel
or water.
4. Bleed air from the fuel system.
Fuel Filter:
1. Remove the water separater.
2. Remove black retaining ring (D).
3. Pull the fuel filter straight down. Do not twist the fuel
filter when removing. Dispose of the old filter
element according to local regulations.
NOTICE
The fuel filter is not threaded and damage to the fuel
manager or filter may result by attempting to turn the
filter during removal or installation.
4. Align key if filter element with the slot in th e header
and push the new filter element up in the center of
the fuel manager.
5. Install retaining ring (D). Hand tighten retaining ring
until it clicks and the arrows line up under the air
vent (E).
6. Bleed air from the fuel system.
en-16
B
Figure 4A
MAINTENANCE
4.7
4
HAND PRIMER PUMP ______________________________________________________
The hand primer pump (F) is used to purge air from the
fuel system. The entire pump assembly is replaceable if
necessary. See the parts list for fuel manager service
parts.
F
G
1. Carefully remove the black retaing ring. The primer
pump is spring loaded.
2. Remove hand pump components and replace with
new compoents.
Figure 4B
4.8
BLEEDING FUEL SYSTEM __________________________________________________
Bleed the fuel system if the water separater, fuel filter, or
hoses have been removed, or the fuel tank has become
empty.
F
1. Loosen the air vent (E) one to two turns.
2. Fully depress and release hand primer pump
plunger (F) until all air has escaped. Up to s ixty
pumps of the hand primer may be required.
3. Close air vent (E).
E
4. Loosen air vent bolt (G) on engine fuel injector
pump.
5. Engage the parking brake.
6. Turn the keyswitch, cranking the engine until all air
has escaped. Turn the keyswitch to the off position.
Figure 4C
7. Tighten air vent bolt (G).
G
Figure 4D
en-17
4
MAINTENANCE
4.9
BATTERY ________________________________________________________________
Make absolutely certain the ignition switch is OFF and
the key has been removed before servicing the battery.
! CAUTION
Always use insulated tools, wear protective glasses or
goggles, and protective clothing when working with
batteries. You must read and o bey all battery
manufacturer’s instructions.
Tighten cables securely to battery terminals and apply a
light coat of silicone dielectric grease to terminals and
cable ends to pr event corrosion. Keep vent caps and
terminal covers in place.
Always disconnect battery cables from battery before
performing any welding operation on the mower.
Check the electrolyte level every 100 hours. Keep the
cable ends, battery, and battery posts clean.
Verify battery polarity before connecting or disconnecting
the battery cables.
1. When installing the battery, always assemble the
RED, positive (+) battery cable first, and the ground,
BLACK, negative (-) cable last.
2. When removing the battery, always remove the
ground, BLACK, negative (-) cable first, and the
RED, positive (+) cable last.
3.
Make sure battery is properly installed and secured
to the battery tray.
! WARNING
Battery posts, terminals, and related accessories
contain lead and lead compounds, chemicals known
to the S tate of Ca lifornia to cause cancer and
reproductive harm. Wash your hands after
handling.
4.10 JUMP STARTING __________________________________________________________
Before attempting to “jump start” the mowe r, check the
condition of the discharged battery. See Section 4.9.
! WARNING
Batteries generate explosive hydrogen gas. To reduce
the chance of an explosion, avoid creating sparks
near battery. Always connect the negative jumper
cable to the fr ame of the mow er with the discharged
battery, away from the battery.
When connecting jumper cables:
1. Stop the engine on the vehicle with a good battery.
2. Connect RED jumper cable to the positive (+)
terminal on th e good battery and to th e positive (+)
terminal on the “discharged” battery.
3. Connect the BLACK jumper cable from the negative
(-) terminal on the g ood battery to th e frame of the
mower with the discharged battery.
After cables have been connected, start the engine on
the vehicle with the good battery then start the mower.
4.11 CHARGING BATTERY _____________________________________________________
! WARNING
Charge battery in a wel l ventilated area. Batteries
generate explosive gases. To prevent an ex plosion,
keep any device that may create sparks or flames
away from the battery.
To prevent injury, stand away from battery when the
charger is turned on. A damaged battery could
explode.
1. Refer to Section 4.9. Read the Battery and
Charger’s manual for specific instructions.
en-18
2. Whenever possible, remove the battery from the
mower before charging. If batt ery is not sealed,
check that the electrolyte covers the plates in all the
cells.
3. Make sure the ch arger is Off. Then connect the
charger to the battery terminals as specified in the
charger’s manual.
4. Always turn the charger Off before disconnecting
charger from the battery terminals.
MAINTENANCE
4
4.12 HYDRAULIC HOSES _______________________________________________________
! WARNING
To prevent serious injury from hot, high pressure oil,
never use your hands to check for oil leaks, use paper
or cardboard.
Hydraulic fluid escaping under pressure can have
sufficient force to penetrate skin. If fluid is injected into
the skin it must be surgically removed within a few
hours by a doctor familiar with this form of injury or
gangrene may result.
1. Always lower implements to gr ound, disengage all
drives, engage parking brake, stop engine, and
remove key before inspecting or disconnecting
hydraulic lines or hoses.
2. Check visible hoses and tubes daily. Look for wet
hoses or oil spots. Replace worn or damaged hoses
and tubes before operating the machine.
3. The replacement tube or hoses must be routed in
the same path as the e xisting hose, do not m ove
clamps, brackets, and ties to a new location.
4. Thoroughly inspect all tubes,
connections every 250 hours.
hoses,
IMPORTANT: The hydraulic system can be
permanently damaged if the oil becomes
contaminated. Before disconnecting any hydraulic
component, clean the area around the fittings, and
the hose ends to keep impurities out of the system.
a. Before disconnecting any hydraulic component,
tag or mark the location of each hose then clean
the area around the fittings.
b. As you disconnect the component, be prepared
to assemble plugs or caps to the hose ends and
open ports. This will keep impurities out of th e
hydraulic system and also prevent oil spills.
c.
Make sure O-rings are clean and hose fittings
are properly seated before tightening.
d. Keep the hose from twisting. Twisted hoses can
cause couplers to loosen as the hose flexes during operation resulting in oil leaks.
e. Kinked or twisted hoses can restrict the oi l flow
causing the system to malfunction and the oil to
overheat and also lead to hose failure.
and
4.13 HYDRAULIC OIL AND FILTER _______________________________________________
Refer to Section 6.3 for specific maintenance intervals.
Drain and replace the hydraulic oil after a major
component failure, or if you notice the presence of water
or foam in the oil, or a rancid odor (indicating excessive
heat).
Always replace the hydraulic filter when changing oil.
level.
c.
Once the level has stabilized and the air is
purged, fill tank to Full mark on gauge.
The hydraulic system is protected by one 10 micron filter
(A). The filter is located under the operator platform near
the hydraulic oil tank.
To replace hydraulic oil filter:
To change hydraulic oil:
1. Remove the old filter.
1. Clean the area around the oil cap to pr event
impurities from entering and contaminating the
system.
2. Fill new filter with oil then install new filter. Hand
tighten only.
2. Remove drain plug from bottom of main tank.
3. Operate engine at idle speed with hydraulic system
in Neutral for five minutes.
3. After oil has drained install drain plug and fill with
Jacobsen Hydraulic oil.
4. Check hydraulic oil level and fill to Full mark on
gauge.
4. Purge air from system.
a. To prevent reels from overheating, disconnect
motors from reels.
b. Operate all mower functions for about 5 minutes
to purge air out of the system and stabilize the oil
en-19
4
MAINTENANCE
4.14 ELECTRICAL SYSTEM _____________________________________________________
If the Interlock System does not function properly and
the problem cannot be c orrected, contact an
authorized Jacobsen Dealer.
! CAUTION
Always turn the ignition switch off and remove the
negative battery cable (Black) before inspecting or
working on the electrical system.
General precautions that can be t aken to reduce
electrical problems are listed below.
1. Make certain all terminals and connections are clean
and properly secured.
3. Keep the wire harness and all individual wires away
from moving parts to prevent damage.
4. Make sure the seat switch harness is connected to
the main wire harness.
5. Check the battery and battery charging circuit.
6. Do not wash or pressure spray around electrical
connections and components.
2. Check the Interlock System and ignition fuse
regularly.
4.15 MUFFLER AND EXHAUST __________________________________________________
! WARNING
Exhaust fumes contain carbon monoxide that is toxic
and can be fatal when inhaled.
NEVER operate an engine without proper ventilation.
To protect from carbon monoxide poisoning, inspect the
complete exhaust system regularly and always replace a
defective muffler.
If you notice a change in the color or sound of the
exhaust, stop the engine immediately. Identify the
problem and have the system repaired.
Torque all exhaust manifold hardware evenly. Tighten or
replace exhaust clamps.
4.16 TIRES ___________________________________________________________________
1. Keep tires properly inflated to prolong tire life. Check
inflation pressure while the tires are cool. Inspect
tread wear.
! CAUTION
Unless you have the proper training, tools, and
experience, DO NOT attempt to mount a tire on a rim.
Improper mounting can produce an e xplosion which
may result in serious injury.
2. Check the pressure with an accurate, low pressure
tire gauge.
1. Keep tires inflated to 14 psi (1 BAR kPa).
4.17 WHEEL MOUNTING PROCEDURE ____________________________________________
1.
Remove dirt, grease, and oil from s tud thread. Do not
lubricate threads.
2.
Make sure the mower is parked on a solid and lev el
surface. Never work on a mower that is supported only
by the jack. Always use jack stands.
Position wheel on hub and inspect to insure full contact
between mounting surface of wheel and hub or brak e
drum.
3.
If only the front or rear of the mower is raised, place
chocks in front of and behind the wheels that ar e not
raised.
Finger tighten all hardware then torque hardware in
criss-cross order; always tighten nuts in the top
position.
4.
Check and r etorque daily until torque is maintained,
Front: 55 ft lb (75 Nm).
Rear: 80 ft lb (108 Nm)
! WARNING
en-20
MAINTENANCE
4
4.18 CARE AND CLEANING _____________________________________________________
Wash the mower and implements after each use. Keep the
equipment clean.
4.
Clean all plastic or rubber trim with a mild soap
solution or us e commercially available vinyl/rubber
cleaners.
NOTICE
5.
To maintain the original high lus ter of the fiberglass,
periodically wax with a good gr ade of O ne-Step
cleaner wax.
Do not wash any portion of the equipment while it is hot.
Do not use high pressure spray or steam. Use cold water
and automotive cleaners.
1.
Use compressed air to clean engine and radiator fins. A
special blow gun is available through Jacobsen Dealer.
2. Use only fresh water for cleaning your equipment.
NOTICE
Use of salt water or affluent water has been known to
encourage rust and corrosion of metal parts resulting
in premature deterioration or failure. Damage of this
nature is not covered by the factory warranty.
3.
Do not spray water di rectly at the instrument panel,
ignition switch, controller, any other electrical
components, or at bearing housings and seals.
Repair damaged metal surfaces and use Jacobsen touch-up
paint. Wax the equipment for maximum paint protection.
! CAUTION
Clean grass and d ebris from cutting units, drives,
muffler, and engine to prevent fires.
! WARNING
NEVER use your hands to clean cutting units. Use a
brush to remove grass clippings from blades. Blades are
extremely sharp and can cause serious injuries.
4.19 RADIATOR _______________________________________________________________
! WARNING
To prevent serious bodily injury from hot coolant or steam
blow-out, never attempt to remove the radiator cap while
the engine is running. Stop the engine and wai t until it is
cool. Even then, use extreme care when remov ing the
cap.
! CAUTION
Do not pour cold water into a ho t radiator. Do no t
operate engine without a p roper coolant mixture.
Install cap and tighten securely.
Check coolant level daily. Radiator should be full and
recovery bottle should be up to the cold mark.
Drain and refill annually. Remove the radiator cap, open the
engine block drain and the radiator drain. Empty and clean
the recovery bottle.
Mix clean water with ethy lene glycol based anti-freeze for
the coldest ambient temperature. Read and foll ow the
instructions on the anti-freeze container and engine manual.
Keep radiator air passages clean. Use compressed air (30
psi (207 kPa) maximum) to clean the fins.
Check and tighten the fan belt. Replace clamps and hoses
every two years.
If you have to add coolant more than once a month, or add
more than one quart at a ti me, have a authorized Jacobsen
Dealer check the cooling system.
en-21
4
MAINTENANCE
4.20 STORAGE ________________________________________________________________
General
Cutting Units
1.
Wash the trac tor thoroughly and lubric ate. Repair and
paint damaged or exposed metal.
1.
Wash the cutting units thoroughly, then repair and paint
any damaged or exposed metal.
2.
Inspect the trac tor, tighten al l hardware, r eplace worn
or damaged components.
2.
Lubricate all fittings and friction points.
3.
Drain and refill radiator.
3.
Apply a l ight coat of r ust preventative oil to the
sharpened edges of the blades.
4.
Clean the tires thoroughly and s tore the trac tor so the
load is off the tires. If tractor is not on j ack stands,
check tires at regular interv als and reinfl ate as
necessary.
5.
Keep the machine and al l its accessories clean, dry
and protected from the elements during storage. Never
store equipment near an open flame or s park which
could ignite fuel or fuel vapors.
Battery
! CAUTION
To prevent personal injury and damage to the cutting
edges, handle the blades with extreme care.
After Storage
1.
Check and reinstall battery.
2.
Check or service fuel filter and air cleaner.
3.
Check the radiator coolant level.
1.
Remove, clean and store battery in upright position in a
cool, dry place.
2.
Check and recharge battery every 60 to 90 days while
in storage.
4.
Check oil level in the engine crankcase and hydraulic
system.
3.
Store batteries in a c ool, dry place. To reduce the s elf
discharge rate, room temperatur e should not be above
80°F (27°C) or fall below 20°F (- 7°C) to prev ent
electrolyte from freezing.
5.
Fill the fuel tank with fresh fuel. O pen fuel s hut off
valve and bleed the fuel system.
6.
Make certain that the tires are properly inflated.
7.
Remove all oi l from the r eels and bedk nife. Adjust
bedknife and cutting height.
8.
Start and operate the engine at 1/2 throttle. Allow
enough time for the engine to become properly
warmed and lubricated.
Engine (General)
1.
While the engine is warm, remove the drain plug, drain
the oil from the crankcase and c hange oil filter. Install
drain plug and refill with fresh oil. Let engine cool before
storing.
2.
Clean exterior of engine. Paint exposed metal, or apply
a light coat of rust preventative oil.
3. Add a fu el conditioner or biocide to p revent gelling
or bacterial growth in fuel. See your local fuel
supplier.
en-22
! WARNING
Never operate the engine without proper
exhaust fumes can be fatal when inhaled.
ventilation;
TROUBLESHOOTING
5
5
TROUBLESHOOTING
5.1
GENERAL________________________________________________________________
The troubleshooting chart below lists basic problems that may occur during s tart-up and operation. For more det ailed
information regarding the hydraulic and electrical systems contact your area Jacobsen Dealer.
Symptoms
Engine will not start.
Engine hard to start
or runs poorly.
Engine stops.
Engine overheating.
Battery not holding
charge.
Possible Causes
Action
1. Traction pedal not in neutral or
Interlock switch on.
1. Check Interlock System and start-up procedure.
2. Battery low on charge or
defective.
2. Inspect condition of battery and battery
connections.
3. Fuel tank empty or dirty.
3. Fill with fresh fuel. Change fuel filter. Bleed fuel
lines.
4. Fuse blown.
4. Replace fuse.
1. Fuel level low, fuel or fuel filter
dirty.
1. Fill with fresh fuel. Change fuel filter. Bleed fuel
lines.
2. Air cleaner dirty.
2. Inspect and replace air filter.
3. Injectors, fuel pump.
3. Consult engine manual.
4. Engine problem.
4. Consult engine manual.
1. Fuel tank empty.
1. Fill with fresh fuel and bleed fuel lines.
2. Interlocks not set before
leaving operator’s seat.
2. Engage parking brake, set PTO switch to OFF
and traction pedal in neutral before leaving seat.
1. Coolant level low.
1. Inspect and add coolant.
2. Air intake restricted.
2. Clean cooling air intake.
3. Water pump belt broken or
loose.
3. Tighten or replace belt.
4. Engine overload.
4. Reduce forward speed.
1. Loose or corroded battery
terminals.
1. Inspect and clean terminals.
2. Low electrolyte.
2. Refill to correct level.
3. Alternator belt loose or broken. 3. Tighten or replace belt.
4. Charging system defective.
4. See engine manual.
1. Cutting units not fully lowered.
1. Lower cutting units to ground.
2. Engine speed too low.
2. Check engine speed. Run engine at full throttle.
3. Low hydraulic oil.
3. Check reservoir level and fill if needed.
1. Parking brake engaged.
1. Disengage parking brake.
2. Tow Valve Open.
2. Close Tow Valve.
3. Low hydraulic oil.
3. Check reservoir level and fill if needed.
Implement does not
raise or lower.
1. Low hydraulic oil.
1. Check reservoir level and fill as needed.
Gauges/Indicator not
operating.
1. Fuse blown.
1. Replace fuse, check bulbs.
2. Loose wiring.
2. Check electrical connections.
Mowers do not cut or
cut unevenly.
Mower does not react
to traction pedal.
en-23
6
MAINTENANCE & LUBRICATION CHARTS
6
MAINTENANCE & LUBRICATION CHARTS
6.1
GENERAL ________________________________________________________________
2. Lubricate with grease that meets or exceeds NLGI
Grade 2 LB specifications. Apply grease with a
manual grease gun and fill slowly until grease begins
to seep out. Do not use compressed air guns.
! WARNING
Before you clean, adjust, or repair this equipment
disengage all drives, lower implements to the ground,
engage parking brake, stop engine, and remove key
from ignition switch to prevent injuries.
3. Periodically apply a sm all amount of li thium based
grease to the seat runners.
4. For smooth operation of al l levers, pivot points and
other friction points that are not shown on th e
lubrication chart apply several drops of SAE 30 oil
every 40 hours or as required.
1. Always clean the grease fitting before and a fter
lubricating.
5. Grease fittings every 40 hours.
6.2
LUBRICATION CHART______________________________________________________
B
D
A
D
C
B
C
A - Steering Axle Pivot
B - Steering Spindle Pivot (2)
C - Steering Cylinder (2)
D - Tie Rod (2)
en-24
MAINTENANCE & LUBRICATION CHARTS
6.3
6
MAINTENANCE CHARTS____________________________________________________
Recommended Service and Lubrication Intervals
Every
8-10
Hours
Air Filter
Every
50
Hours
Every
100
Hours
Every
250
Hours
I
Every
1000
Hours
I-A*
4.4
I
Engine Oil Filter
3.2
R
Fuel System
I
R*
R
R*
R
IV
4.3
II
C****
Fuel Filter
R
4.6
I
4.6
Grease Fittings - All
L
Hydraulic Hoses and Tubes
I***
Hydraulic Oil
I-A
Hydraulic Oil Filter
4.19
4.14
I
Fuel Water Separater
Lubricant
Type
3.3
A
I*
Engine Oil (Diesel)
6.2
I
4.12
R
I
I
4.13
R
4.13
I
4.15
III
I-A
Muffler and Exhaust
Tires
R
R
I-C-A
Electrical System
Radiator Screens
See
Section
4.9
I-A
I-A*
Interlock System
Yearly
I
Brake
Cooling System
Every
500
Hours
R**
Battery Charge
Belts (Alternator and Deck)
Every
400
Hours
I
I-C/AR
4.19
I-A
4.16
A - Add or Adjust
C - Clean
I - Inspect
L- Lubricate
R - Replace
AR - As Required
* Indicates initial service for new machines.
** Sooner for dirty operating conditions.
*** Inspect visible hoses and tubes for leaks or oil marks.
**** Drain and clean fuel tank.
I
- Manual grease gun with NLGI Grade 2 (Service Class
LB).
II
- Engine Oil - See Section 4.4
III
- Use Jacobsen hydraulic fluid: Capacity: 5 gallons
(19 Liters). Order Part No. 2500548 carton, containing
two 2-1/2 gal. (9.5 liter) bottles or Part No. 2500546
containing 5 gal. (19 liters), pail.
IV - 50/50 water ethylene glycol mix.
en-25
7
NOTES
7
OTES
en-26
N
PARTS CATALOG
8
8.1
8
PARTS CATALOG
TABLE OF CONTENTS______________________________________________________
1.1 ......... Decals ................................................................ 28
2.1 ......... Hood and Fenders ............................................ 30
3.1 ......... Front Body ......................................................... 32
4.1 ......... Rear Body .......................................................... 34
5.1 ......... Seat Pan ............................................................. 36
5.2 ......... Seat Pan ............................................................. 38
6.1 ......... Instrument Panel ............................................... 40
7.1 ......... Traction Pedal and Linkage ............................. 42
8.1 ......... Brake Pedal ....................................................... 44
9.1 ......... Front Wheel Motor and Brakes ........................ 46
10.1 ....... Frame ................................................................. 48
11.1 ....... ROPS .................................................................. 50
11.2 ....... ROPS .................................................................. 52
12.1 ....... 2WD Steering..................................................... 54
13.1 ....... 4WD Steering..................................................... 56
14.1 ....... Front Panel ........................................................ 58
15.1 ....... Radiator and Oil Cooler .................................... 60
16.1 ....... Engine Mounting ............................................... 62
17.1 ....... Engine and Pumps............................................ 64
18.1 ....... Fuel and Hydraulic Tanks ................................ 66
19.1 ....... Fuel System ....................................................... 68
20.1 ....... Lift Cylinder and Chains................................... 70
21.1 ....... Hydraulic Valves ............................................... 72
21.2 ....... Hydraulic Valves ............................................... 74
22.1 ....... Pump Hydraulics............................................... 76
23.1 ....... 2WD Traction Hydraulics ................................. 78
24.1 ....... 2WD Drain Hydraulics ...................................... 79
25.1 ....... 4WD Hydraulics................................................. 80
26.1 ....... Steering and Lift Hydraulics ............................ 82
26.2 ....... Steering and Lift Hydraulics ............................ 84
27.1 ....... Deck Valve Hydraulics...................................... 86
28.1 ....... Hydraulic Clamps.............................................. 88
29.1 ....... Deck Attachment............................................... 90
30.1 ....... Deck Decals ....................................................... 92
31.1 ....... Deck Decals ....................................................... 93
32.1 ....... Belt Cover .......................................................... 94
33.1 ....... Belt Cover .......................................................... 95
34.1 ....... Push Arms ......................................................... 96
35.1 ....... Deck Drive ......................................................... 98
36.1 ....... Deck Drive ....................................................... 100
37.1 ....... Discharge Chute ............................................. 102
38.1 ....... Foot Guards..................................................... 103
39.1 ....... Caster Wheels and Rollers............................. 104
40.1 ....... Caster Wheels and Rollers............................. 105
41.1 ....... Caster Wheel ................................................... 106
42.1 ....... Traction Pump ................................................. 107
43.1 ....... Main Case and Input Shaft ............................. 108
44.1 ....... Valve Plate and Charge Pump ....................... 110
45.1 ....... Deck Valve ....................................................... 112
46.1 ....... Rear Wheel Motors ......................................... 113
47.1 ....... Electrical Schematic ....................................... 114
48.1 ....... 2WD Hydraulic Schematic.............................. 116
49.1 ....... 4WD Hydraulic Schematic.............................. 117
en-27
TURFCAT T628D
Serial No. All
1.1 Decals
2000744
2000739
23
25
A Textron Company
2000745
9
2
8
13
11
14
2000591
12
2000650
16
4239123
2
25
30
23
24
31
12
11
5
2000653
13
4
15
16
PRESSURE
00459
4199140
26
30
RETURN
00460
2-WHEEL
DRIVE
ONLY
27
9
2-WHEEL
DRIVE
ONLY
7
3 3
1
2
5
28
8
6
Service Items
4
2000655
10
DAILY
Check Interlock System
X
Check Engine Oil (1)
X
Check Hydraulic Oil Level (5)
X
Check Coolant Level (7)
X
Check Water Separater (6)
X
Check Tire Pressure
X
Check/Clean Engine
Compartment, Radiator & Screen
Clean Air Cleaner Particle Collector
X
Lubricate Grease Fittings
Replace Ait Cleaner Element (2)
7
14
Hours of
Operation
80
2
2
14 lb/in (1.0 kg/cm )
2000652
21
2000688
15
NOTICE
WARRANTY
VOID IF SEAL IS
BROKEN
FLUID
QUANTITY
TYPE
100
400
X
Every week
Every 400 hrs
(sooner for dirty operating conditions)
Check/Top-up Battery
X
Check Fastner Tightness
X
Check Fan Belt Tension
X
Change Engine Oil & Filter (3)
X
Change Hydraulic Oil & Filter (4)
X
Service Engine Per Engine Manual
X
Change Fuel Filters (8)
X
Check Rear Wheel Toe-In
X
Drain & Clean Fuel Tank
X
Drain & Flush Cooling System (9)
X
ENGINE OIL
0.88 gallons (3.3 liters)
10W30 SF-CD
(Trailing numbers show location on diagram for service items)
HYDRAULIC OIL
6.8 gallons (25.3 liters)
10W30 SF-CD
SERVICE NOTES:
RADIATOR COOLANT 1.70 gallons (6.4 liters) 50% ANTI-FREEZE
600
X
Verify Cutter Deck Belt Tension
2000641
2000741
No service is a one-time job. These hours
are intervals between EACH service.
SERVICE MORE OFTEN
UNDER DIRTY CONDITIONS.
• Change engine oil, hydraulic oil and both oil filters FIRST 50 hours of operation.
• Refer to engine manual for engine maintenance.
2722063
4117962
6
24
4181865
4181862
17
31
2WD
2000742
R
5
F
19
3
1
L WA
2000647
4WD
105 dB
29
3
A Textron Company
Manufactured under one or more
of the following U.S. patents:
5915496
and others pending.
4194329
2WD
4
20
15°
P
4
® 11524 WILMAR BLVD,
CHARLOTTE, NC 28273
PRODUCT OF U.S.A.
P
2000743
18
28
+
2000767
kg
A Textron Company
kW
1-800-848-1636 (US)
TURFCAT T628D
Item
Part No.
Qty.
Description
1
2
3
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
4179663
2
Decal, Jacobsen
4239123
4125286
4126532
2000767
2000742
2722063
2000641
4179664
2000745
2000655
2000740
2000591
2000653
2000741
2000688
2000650
4181865
2000743
2000647
4194329
2000652
REF
2000739
4117962
2000744
00459
00460
1
2
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Decal, Seat Restraint
Decal, Turfcat 2WD
Decal, Turfcat 4WD
Decal, Slope Warning
Decal, Air Intake
Decal, Service
Decal, Fuel Warning
Emblem, Jacobsen
Decal, Spring Tension
Decal, Read Manual
Decal, Deck Lift Lever
Decal, Throttle Lever
Decal, Hydraulic Leak Warning
Decal, Hydraulic Reservoir
Decal, Tire Pressure 14 psi
Decal, Battery Warning
Decal, Main Warning
Decal, Brake Pedal
Decal, Forward/Reverse
Decal, Patent Number
Decal, Diesel Fuel
Serial Plate
Decal, Fan Warning
Decal, Warranty Void
Decal, Rotating Parts Warning
Decal, Pressure
Decal, Pressure
28
4127564
1
Decal, Steering Wheel Cap
29
30
31
4117468
4199140
4181862
1
1
1
Decal, 105 dB Sound
Decal, Heat
Decal, Radiator Cap Warning
Serial Numbers/Notes
Used on 69168 and 69175
Used on 69169 and 69176
Used on 69169 Only
Located on Steering Wheel
69168 - 1651~1778
69169 - 1651~1906
Located on Radiator
> Change from previous revision
29
TURFCAT T628D
Serial No. All
2.1 Hood and Fenders
2-WHEEL
DRIVE
ONLY
9
2-WHEEL
DRIVE
ONLY
7
3 3
1
2
8
6
Service Items
4
5
No service is a one-time job. These hours
are intervals between EACH service.
SERVICE MORE OFTEN
UNDER DIRTY CONDITIONS.
Hours of
Operation
DAILY
Check Interlock System
X
Check Engine Oil (1)
X
Check Hydraulic Oil Level (5)
X
Check Coolant Level (7)
X
Check Water Separater (6)
X
Check Tire Pressure
X
Check/Clean Engine
Compartment, Radiator & Screen
Clean Air Cleaner Particle Collector
X
FLUID
QUANTITY
HYDRAULIC OIL
TYPE
100
400
X
Every week
Every 400 hrs
(sooner for dirty operating conditions)
Check/Top-up Battery
X
Check Fastner Tightness
X
Check Fan Belt Tension
X
Change Engine Oil & Filter (3)
X
Change Hydraulic Oil & Filter (4)
X
Service Engine Per Engine Manual
X
Change Fuel Filters (8)
X
Check Rear Wheel Toe-In
X
Drain & Clean Fuel Tank
X
Drain & Flush Cooling System (9)
X
0.88 gallons (3.3 liters)
10W30 SF-CD
(Trailing numbers show location on diagram for service items)
6.8 gallons (25.3 liters)
10W30 SF-CD
SERVICE NOTES:
RADIATOR COOLANT 1.70 gallons (6.4 liters) 50% ANTI-FREEZE
600
X
Verify Cutter Deck Belt Tension
Lubricate Grease Fittings
Replace Ait Cleaner Element (2)
80
1
• Change engine oil, hydraulic oil and both oil filters FIRST 50 hours of operation.
• Refer to engine manual for engine maintenance.
5
2722063
6
15
10
2
2WD
22
4WD
4 (4WD Units)
23 24
25
4
17
13
14
16
27
12
7
23
12
22
11
2
3
11
9
27
4 (2WD Units)
26
A
WD
y
an
mp
Co
on
xtr
Te
2000742
5
25
25
25
23
8
25
2000641
21
20
2000652
21
20
25 24
23
25
26
26
18 25 26
25
19
30
25
23
TURFCAT T628D
Item
Part No.
Qty.
1
2721979
1
2
3
4
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
64018-20
445784
463603
463604
64215-05
4179663
4125286
4126532
2000742
2722063
2721970
2198137
2192248.7
457023
366883
118047-06
2192571.7
460336
400112
445784
444851
2721969
2198136
2000641
2000652
444306
361005
446136
450400
450378
402058
12
12
16
5
8
1
2
2
1
1
1
1
1
4
1
2
2
2
2
2
2
1
1
1
1
4
12
4
20
8
4
Description
Serial Numbers/Notes
Hood
• Carriage Bolt, 1/4-20
• Nut, 1/4-20 Whizlock Flange
• Pop Rivet, IFI #44
• Rivet, 5/16 x 1-1/4” Rouand Head
• Pop Rivet, IFI #64
• Decal, Jacobsen
• Decal, Turfcat 2WD
• Decal, Turfcat 4WD
• Decal, Air Intake
• Decal, Service
Right Side Fender
• Mat, Right Side Fender
Bracket, Latch Post
Flat Washer
Latch, Hood
Bushing, 3/8” Flip Lock
Stop, Hood Pivot
Hair Pin, 3/32 x 1-3/16
Screw, 1/4-20 x 1” Hex Head
Nut, 1/4-20 Whizlock Flange
Locknut, 1/4-20
Left Side Fender
• Mat, Left Side Fender
• Decal, Fuel Warning
• Decal, Diesel Fuel
Nut, #8-32 Hex
Screw, M8-1.25 x 25 mm Hex Head
Lockwasher, 5/16 Heavy
Flat Washer, 1/4
Nut, M8-1.25 Nylock Nut
Screw, #8-32 x 1/2” Machine Screw
Not Shown
Not Shown
Not Shown
4 Not Shown
Used on 69168 Only
Used on 69169 Only
Located under hood
> Change from previous revision
31
TURFCAT T628D
Serial No. All
3.1 Front Body
1
7
3
4
6
7
8
3 5
4
2
7
5
4
9
9
13
7
8
31
15
30
23
12
5 4
A Textron Company
19
12
11
14
32
22
4
6
11
15
10
2
14
33
9
29
16
28
19
25
26
26
11
26
20
8
21
2000745
21
8
18
32
24
18 17
17
11
25
27
26
TURFCAT T628D
Item
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
Part No.
Qty.
REF
1
2208058.7
450191
450400
450378
2202118.7
434071
453011
445816
444310
450379
450192
REF
403753
445784
2192669.6
400262
446142
4179664
2196104
2000745
2192220.6
409953
2192472.7
361619
452008
N/S
806953
2182427.7
2192649.7
38383
402122
48517-01
2
4
12
8
2
4
8
4
2
6
4
1
4
4
1
6
6
1
1
1
1
2
1
4
4
1
2
1
1
1
2
1
Description
Seat Pan Assembly
Hinge, Seat Plate
Screw, M8-1.25 x 20 mm Hex Head
Flat Washer, M8
Nut, M8-1.25 Nylock
Support, Seat
Shoulder Bolt, 5/16-18
Flat Washer, 3/8
Locknut, 5/16
Nut, #10-24 Hex
Nut, M10-1.5 Nylock
Screw, M8-1.25 x 25 mm Hex Head
Instrument Panel
Screw, 1/4-20 x 1/2” Hex Flange
Nut, 1/4-20 Whizlock Flange
Steering Tower Cover
Screw, 3/8-16 x 1” Hex Head
Lockwasher, 3/8 Heavy
Emblem, Jacobsen
Spring Bracket
• Decal, Spring Tension
Plate, Tower
Screw, 1/4-20 x 3/8” Hex Washer
Tray, Battery
Screw, M10-1.5 x 25 mm Hex Head
Flat Washer, 3/8
Battery, BCI 26
Rod, Battery Hook
Battery Hold Down
Mount, PTO Enable Switch
Switch, PTO Enable Switch
Screw, #10-24 x 1” Slotted
Hole Plug, 3/4”
Serial Numbers/Notes
See 5.1
See 6.1
REFERENCE SW10, See 47.1
> Change from previous revision
33
TURFCAT T628D
Serial No. All
4.1 Rear Body
23
13
6
10
23
13
17
16
18
22
7
89
20
12
13
12
7
14
13
22
17
15
13
19
8 9
21
22
12
13
11
5
10
13
14
13
14
23
13
14
25
1
3
4
34
2
24
13
14
26
13
TURFCAT T628D
Item
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
Part No.
Qty.
192187.7
1
548045
445784
48228-07
2202061.6
REF
3002098
N/S
N/S
48517-05
4155480
363586
64251-003
64237-05
2721519
2721511
108094-01
108194-06
REF
198069-02
2721526
326799
361898
306799
REF
REF
4
4
1
1
1
4
1
1
2
2
4
18
12
1
1
4
1
1
1
1
4
8
1
1
1
Description
Serial Numbers/Notes
Bracket, Tube Support
Screw, 1/4-20 x 3/4” Whizlock Flange
Nut, 1/4-20 Whizlock Flange
Clip, Cable
Rear Panel
Radiator and Oil Cooler Assembly
Latch, Swell
• Nut
• Rubber, Swell
Plug, Hole
Plug, Hole
Screw, M8-1.25 x 20 mm Hex Head
Flat Washer, M8
Nut, M8-1.25 Nylock
Lower Radiator Hose
Upper Radiator Hose
Clamp, 1-3/4” Hose
Flex Trim
Front Panel Assembly
Hose, Air Cleaner Intake
Hose, Air Cleaner to Engine
Clamp, 2-1/2” Hose
Screw, M8-1.25 x 16 mm Hex Head
Lockwasher, External Tooth
Negative Battery Cable
Engine Ground Cable
See 15.1
Cut to 21”
See 14.1
> Change from previous revision
35
TURFCAT T628D
Serial No. 69168 - 1651~1789
Serial No. 69169 - 1651~1929
5.1 Seat Pan
1
3
4239123
43
3
26
15°
+
2000767
2
42
2000653
28
15
44
45
16
2000741
29
45
45
16
15
8
45
16
14
2000591
14
15
13
16
27
14
15
19
2000650
9
18
36
21
22
34
32
20
38
42
39
30
23
40
5
2000655
17
33
41
6
10
11
12
23
10
11
25
17
36
32
10
11
12
26
38
4
28
27
35
37
43
30
14
29
10
11
12
12
24
7
31
21
31
14 lb/in2 (1.0 kg/cm2)
2000688
7
TURFCAT T628D
Item
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
Part No.
Qty.
Description
4182780
1
Seat Assembly Suspension
4210500
4210685
407587
22372
444310
445851
523357
523356
452006
446134
443106
4197522
3001328
445795
450190
48228-1A
2208075
158136
2306144
2000655
2000688
400108
482228A
2721881
2000740
2000591
2000653
2000741
2000650
38542
38061A
2192254.7
409908
2721527
2198109
434070
454033
455013
444762
148057-01
2000767
4239123
4197523
450411
1
1
1
1
1
2
1
1
4
4
4
1
4
4
4
1
2
1
1
1
1
2
1
1
1
1
1
1
1
2
2
1
2
1
1
1
5
1
1
1
1
1
1
4
• Switch, Seat
• Arm Rest Kit
Screw, #10-24 x 3/4” Machine
Cable Clip
Nut, #10-24 Hex
Locknut, 1/4-20 Hex
Adjuster, Slave
Adjuster, Latching
Flat Washer, 5/16
Lockwasher, 5/16
Nut, 5/16-18 Hex
Bracket, Left Side Seat Support
Screw, 5/16-18 Hex Flange
Nut, 5/16-18 Spiralock Flange
Screw, M8-1.25 x 16 mm Hex Head
Clamp, 1” I.D.
Latch, Adjustable Lever Panel
Wire Harness, Seat Switch
Document Tube
• Decal, Read Manual
• Decal, Tire Pressure
Screw, 1/4-20 x 3/4” Hex Head
Cable Clip
Seat Plate
• Decal, Deck Lift Lever
• Decal, Throttle Lever
• Decal, Hydraulic Leak Warning
• Decal, Hydraulic Reservoir
• Decal, Battery Warning
Clamp, Document Tube
Cap, Document Tube
Bracket, Throttle
Screw, 1/4-20 x 3/4” Thread Cutting
Lever, Throttle
Knob, Throttle
Shoulder Bolt, 3/8-16 x 1-1/8”
Conical Spring Washer, 1/2”
Flat Washer, 1/2
Locknut, 3/8-16 Center
Throttle Cable
Decal, Slope Warning
Decal, Seat Restraint
Bracket, RIght Side Seat Support
Lockwasher, M8
Serial Numbers/Notes
REFERENCE SW2, See 47.1
Throttle Cable Routing
Seat Switch Harness
> Change from previous revision
37
TURFCAT T628D
Serial No. 69168 - 1790 and Up
Serial No. 69169 - 1930 and Up
Serial No. 69175 - 1651 and Up
Serial No. 69176 - 1651 and Up
5.2 Seat Pan
1
3
4239123
43
3
26
15°
+
2000767
2
42
2000653
28
15
16
14
13
2000741
29
2000591
15
15
16
16
27
13
14
8
16
15
14
19
2000650
9
18
36
43
28
14
29
27
21
20
34
32
38
38
42
39
30
23
40
4
5
2000655
17
33
41
6
10
11
12
23
10
11
25
17
38
32
10
11
12
35 26
37
30
10
11
12
12
24
7
31
21
31
14 lb/in2 (1.0 kg/cm2)
7
2000688
22
TURFCAT T628D
Item
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
Part No.
Qty.
Description
4139433
1
Seat Assembly Suspension
4139450
4139436
64152-49
22372
444310
64151-8
523357
523356
452006
446134
443106
4139453
3001328
445795
409812
48228-1A
2208075
158136
2306144
2000655
2000688
400108
482228A
2721881
2000740
2000591
2000653
2000741
2000650
38542
38061A
2192254.7
64197-002
2721527
2198109
64166-17
64209-01
367314
444762
148057-01
2000767
4239123
1
1
1
1
1
2
1
1
4
4
4
2
4
4
4
1
2
1
1
1
1
2
1
1
1
1
1
1
1
2
2
1
2
1
1
1
5
1
1
1
1
1
• Switch, Seat
• Arm Rest Kit
Screw, #10-24 x 3/4” Machine
Cable Clip
Nut, #10-24 Hex
Locknut, 1/4-20 Hex
Adjuster, Slave
Adjuster, Latching
Flat Washer, 5/16
Lockwasher, 5/16
Nut, 5/16-18 Hex
Bracket, Seat Support
Screw, 5/16-18 Hex Flange
Nut, 5/16-18 Spiralock Flange
Screw, 5/16-18 x 3/4” Thread Cutting
Clamp, 1” I.D.
Latch, Adjustable Lever Panel
Wire Harness, Seat Switch
Document Tube
• Decal, Read Manual
• Decal, Tire Pressure
Screw, 1/4-20 x 3/4” Hex Head
Cable Clip
Seat Plate
• Decal, Deck Lift Lever
• Decal, Throttle Lever
• Decal, Hydraulic Leak Warning
• Decal, Hydraulic Reservoir
• Decal, Battery Warning
Clamp, Document Tube
Cap, Document Tube
Bracket, Throttle
Screw, 1/4-20 x 3/4” Thread Cutting
Lever, Throttle
Knob, Throttle
Shoulder Bolt, 3/8-16 x 1-1/8”
Conical Spring Washer, 1/2”
Flat Washer, 1/2
Locknut, 3/8-16 Center
Throttle Cable
Decal, Slope Warning
Decal, Seat Restraint
Serial Numbers/Notes
REFERENCE SW2, See 47.1
Throttle Cable Routing
Seat Switch Harness
> Change from previous revision
39
TURFCAT T628D
Serial No. All
6.1 Instrument Panel
17
6
10
5
11
9
16
4
1
7
27
21
63
12
8
13
8
P
TO
S
2
15
13
1
14
3
40
TURFCAT T628D
Item
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
Part No.
Qty.
Description
2721878
1
Instrument Panel
2721631
2810269
NS
2811020
4174684
2198089
178092-22
188015
2198088
48517-02
48517
178092-13
148032
148269
2188178
148061
1
1
1
1
1
1
2
1
1
1
1
2
1
1
1
1
• Decal, Instrument Panel
Ignition Switch
• Nut, Ignition Switch
• Key, Ignition Switch
Switch, PTO
Lamp Holder
• Lamp
Oil Pressure Lens
Battery Lens
Hole Plug, 5/8”
Hole Plug, 1”
Switch Hole Plug
Fuel Gauge
Temperature Gauge
Switch Retainer
Horn Switch (Optional Kit)
Serial Numbers/Notes
REFERENCE SW1, See 47.1
REFERENCE SW5, See 47.1
REFERENCE L1 and L2, See 47.1
REFERENCE U4, See 47.1
REFERENCE U3, See 47.1
REFERENCE SW8, See 47.1
> Change from previous revision
41
TURFCAT T628D
Serial No. All
7.1 Traction Pedal and Linkage
4
3
5
12
15
1
2
14
11
6
12
14
15
9
7 8
18
11
27
28
26
37
10
13
36
35
38
34
6
37
29
6
33
21
32
23
16
19
30
24
31 32
25
17
25
18
19
42
22
17
23
20
21
TURFCAT T628D
Item
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
Part No.
Qty.
Description
4118926
1
Traction Pedal
4118925
4114282
4114284
48013-06A
403753
108208
402118
444310
4114249
48428
415510
48429
43067A
4117819
831586
445784
400112
128079
446130
445770
128089-02
443104
400274
445783
2196133.7
450015
461385
2192444.7
450192
450400
450378
400250
2193046
2198279
123032
444754
443108
1
1
1
1
6
1
2
2
1
2
4
1
2
2
1
4
2
2
1
2
1
2
1
2
1
1
1
1
2
2
3
1
1
1
1
2
1
• Pad, Traction
Heel Support
• Pad, Traction
• Pad, Traction
Screw, 1/4-20 x 1/2 Hex Flange
Switch, Neutral
Screw, #10-24 x 1/2” Machine
Nut, #10-24 Hex
Neutral Control
Collar, 3/8” Shaft
Set Screw, 1/4-20 x 1/4”
Spring, Extension
Collar, 1/2” Shaft
Bearing, 1/2” Pillow Block
Ball Joint, 5/16-24
Nut, 1/4-20 Whizlock Flange
Screw, 1/4-20 x 1” Hex Head
Rod End, 1/4-28 Female
Lockwasher, 1/4
Locknut, 1/4-20 Nylon
Control Cable, 37-1/2”
Nut, 1/4-28 Hex
Screw, 3/8-16 x 2-1/2” Hex Head
Nut, 3/8-16 Whizlock Flange
Control Arm
Screw, M8-1.25 x 35 mm Hex Head
Roll Pin, 3/16 x 1-1/4”
Bracket, Neutral Control
Screw, M8-1.25 x 25 mm Hex Head
Washer, M8
Locknut, M8-1.25 Nylon
Screw, 5/16-24 x 5” Hex Head
Bushing
Spring, Compression
Bushing
Locknut, 5/16-24 Center
Nut, 5/16-24 Hex
Serial Numbers/Notes
REFERENCE SW3, See 47.1
> Change from previous revision
43
TURFCAT T628D
Serial No. All
8.1 Brake Pedal
7
6
7
8
8
6
3
5
9
16
1
13
14
2
4
21
11
8
10
9
12
19
15
20
17
18
44
11
8
TURFCAT T628D
Item
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
Part No.
Qty.
Description
2721907
1
Brake Pedal
810149
2198129
2192308.7
2192310.7
2192361.7
548045
445784
548604
2722201.7
2192351.7
450170
450377
143011
840476
461359
38382
402122
444310
38382
48228-07
1
1
1
1
2
8
8
7
1
2
1
1
1
1
2
1
2
2
1
1
• Rubber Bumper
• Brake Pedal Mat
Support, Left Side Brake Shaft
Support, RIght Side Brake Shaft
Clamp, Brake Support
Screw, 1/4-20 x 3/4” Whizlock Flange
Nut, 1/4-20 Whizlock Flange
Screw, 5/16-18 x 3/4” Whizlock Flange
Parking Brake Lever
Bracket, Brake Lever
Screw, M6-1 x 16 mm Hex Head
Nut, M6-1 Hex Nyloc
Link, Pedal
Spring, Tension
Roll Pin, 1/8 x 3/4”
Parking Brake Switch, NO
Screw, #10-24 x 1” Slotted
Nut, #10-24 Hex
Parking Brake Interlock Switch, NO
Clip, Cable
Serial Numbers/Notes
REFERENCE SW5, See 47.1
REFERENCE SW11, See 47.1
> Change from previous revision
45
TURFCAT T628D
Serial No. All
9.1 Front Wheel Motor and Brakes
22
25
24
23
20
26
6
17
14
21
19
16
8
2
5
3 4
9
6
25 26
24
11
12
46
3
9 7
4 5
1
6
13
11
6
15
10
16 17
21 20
23
18
22
TURFCAT T628D
Item
1
2
3
4
5
6
7
8
9
10
11
12
13
14
14
15
16
17
18
19
20
21
22
23
24
25
26
Part No.
Qty.
Description
2721672
1
Rod, Left Side Brake
2721813
38020-01
443112
461465
460336
2721676.7
2721852.7
118047-04
450215
452008
450379
2721320-01
2721534-01
2721320-01
148138
64164-08
400446
2722335
403752
1003400
1003399
5003192
5003193
400182
446136
2721275
64025-35
3007796
453011
800531
1
2
2
2
4
1
1
2
4
8
4
1
1
1
1
1
8
2
8
1
1
1
1
8
8
2
2
2
2
2
Rod, Right Side Brake
Clevis Yoke, 3/8” Plate
Nut, 3/8-24 Hex
Clevis Pin, 3/8 x 1-1/8”
Hair Pin, 3/32 x 1-3/16”
Bracket, Left Side Brake Rod
Bracket, Right Side Brake Rod
Bushing, 1/2” Fliplock
Screw, M10-1.5 x 30 mm Hex Head
Flat Washer, M10
Nut, M10-1.5 Nylock
Left Side Wheel Motor
Right Side Wheel Motor
Right Side Wheel Motor
• Seal Kit
• Shaft Key
Screw, 1/2-20 x 2” Hex Head
Adapter, Motor
Screw, 5/16-18 x 1” Flat Head
Left Side Brake Assembly
Right Side Brake Assembly
• Shoe Repair Kit
• Spring Repair Kit
Screw, 5/16-18 x 5/8” Hex Head
Lockwasher, 5/16
Brake Drum
Nut, 1-1/8 Hex
Guide, Brake
Flat Washer, 3/8
Locknut, 3/8-24
Serial Numbers/Notes
2WD Units
4WD Units
> Change from previous revision
47
TURFCAT T628D
Serial No. All
10.1 Frame
26
24
23
25
3
18
28
20
21
5 (2WD)
5
22
27
5
21
39
4
41
8
15
29
7
20
42
8
7
19
1
40
13
10
14
8
11 / 12
P
2000727
P
2000743
R
7 6
7
8
2
31
7 6
30
7
17
F
15
14
36
2000647
31
® 11524 WILMAR BLVD,
CHARLOTTE, NC 28273
PRODUCT OF U.S.A.
Manufactured under one or more
of the following U.S. patents:
5915496
and others pending.
kg
A Textron Company
1-800-848-1636 (US)
7
kW
4194329
39
6
40
16
L WA
33
105 dB
7 9
41
38
37
32
34
35
4181865
13
48
TURFCAT T628D
Item
●
●
◆
●
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
36
37
38
39
40
41
42
Part No.
Qty.
2721873
1
450359
2721872
450359
450367
450215
452008
450379
450029
2721874
148086
148085
4181865
2000743
2000647
4113467
450359
2196132.6
363386
452010
450380
450048
2192586.7
2192304.7
441693
444758
2206030.7
409812
445820
REF
361648
REF
4242522
4249870
4242523
353914
4242525
4242527
4236020
4242528
4242526
354807
4194329
REF
4117468
3
1
6
2
10
24
12
2
1
1
1
1
1
1
1
2
1
4
8
8
4
1
AR
2
2
1
4
1
1
2
1
2
2
10
2
2
2
2
2
8
1
1
1
AR
Description
Serial Numbers/Notes
Frame Rail, Left Side
• Insert, M8-1.25
Frame Rail, Right Side
• Insert, M8-1.25
• Insert, M6-1
Screw, M10-1.5 x 30 mm Hex Head
Flat Washer, M10
Locknut, M10-1.5 Nylon
Screw, M10-1.5 x 35 mm Hex Head
Front Frame
• Mat, Left Side Floor
• Mat, Right Side Floor
• Decal, Main Warning
• Decal, Brake Pedal
• Decal, Forward/Reverse
Front Axle
Insert, M8-1.25
Rear Frame
Screw, M12-1.75 x 30 mm Hex Head
Flat Washer, 1/2
Locknut, M12-1.75 Nylon
Screw, M12-1.75 x 40 mm Hex Head
Rear Bumper
Rear Weight
Carriage Bolt, 1/2-13 x 5”
Locknut, 1/2-13 Nylon
Rear Axle Pivot
Screw, 5/16-18 x 3/4 Thread Cutting
Nut, 1-1/4-12 Nylock
Rear Axle
Thrust Washer
Wheel Motor and Brake
Wheel and Tire Assembly
• Tire, 23 x 10.5-12 4 Ply Multi Trac
• Rim, 12 x 8.5” with Valve
Wheel Bolt, 1/2-20
Wheel and Tire Assembly
Wheel and Tire Assembly
• Tire, 18 x 9.5-8 4 Ply Rib Tread
• Tire, 18 x 8.5-8 4 Ply Turf Trac
• Rim, 8 x 7”
Wheel Nut, 1/2-20
Decal, Patent Number
Serial Plate
Decal, 105 dB Sound
Trim, 1/8” Channel Flex
Use Insert Tool 2196247
Use Insert Tool 2196247
Use Insert Tool 2196246
Not Shown
Use Insert Tool 2196247
2WD Qty 11, 4WD Qty 8
See 12.1(2WD), or See 13.1 (4WD)
See 9.1
2WD Units
4WD Units
2WD Units
4WD Units
4WD Units Only
> Change from previous revision
49
TURFCAT T628D
Serial No. 69168 - 1651 ~ 1795
Serial No. 69169 - 1651 ~ 1937
11.1 ROPS
Straight ROPS
7
1
4
6 5
8
3
5
6
7
4
3
8
2
9
50
TURFCAT T628D
Item
Part No.
1
2
3
4
5
6
7
8
9
Qty.
Description
970078
1
ROPS
444752
453020
400336
443114
446148
4164240
NS
N/S
400626
4140094
4
4
2
2
2
1
1
1
4
4
•
•
•
•
•
•
•
•
•
•
Serial Numbers/Notes
Locknut, 5/8-11 Hex Center
Flat Washer, 5/8
Screw, 7/16-14 x 1-1/4” Hex Head
Nut, 7/16-14 Hex
Lockwasher, 7/16
Seat Belt
• Latching Half
• Retractor Half
Screw, 5/8-11 x 3-1/2” Hex Head
Flat Washer, 5/8 Hardened
> Change from previous revision
51
TURFCAT T628D
Serial No. 69168 - 1796 and Up
Serial No. 69169 - 1938 and Up
Serial No. 69175 - 1651 and Up
Serial No. 69175 - 1651 and Up
11.2 ROPS
Bent ROPS
7
1
4
6 5
8
3
5
6
7
4
3
8
2
9
52
TURFCAT T628D
Item
Part No.
1
2
3
4
5
6
7
8
9
Qty.
Description
4254670
1
ROPS
444752
453020
400336
443114
446148
4164240
NS
N/S
400626
4140094
4
4
2
2
2
1
1
1
4
4
Locknut, 5/8-11 Hex Center
Flat Washer, 5/8
Screw, 7/16-14 x 1-1/4” Hex Head
Nut, 7/16-14 Hex
Lockwasher, 7/16
Seat Belt
• Latching Half
• Retractor Half
Screw, 5/8-11 x 3-1/2” Hex Head
Flat Washer, 5/8 Hardened
Serial Numbers/Notes
> Change from previous revision
53
TURFCAT T628D
Serial No. 69168 - All
12.1 2WD Steering
7
6
4
5
2
3
11
7
2
6
5
2
4
A
3
2
16
8
25
17
1 3
2
15
9
2
12
20
13
24
26
10
18
22
12
14
8
27
26
A
23
9
19
21
25
31
35
27
26
32
21
25
34
33
29
30
28
29
29
30
28
29
33
34
35
31 32
54
TURFCAT T628D
Item
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
Part No.
Qty.
Description
2196145.6
1
Rear Axle
108003
471214
361648
809174
800488
361500
2721223
173042
4118238
4118238-01
400416
445057
2203049
800602
800490
2721183
471213
445660
35027N
148058-02
148058-01
471213
445660
2193045.7
445664
443128
460028
452012
2721185.7
48476-A1
500596
48480
48479
471213
453022
800743
460032
6
3
2
2
2
2
2
2
1
1
1
3
1
1
1
1
1
1
1
1
1
1
1
1
1
1
3
4
2
2
2
1
1
1
4
2
2
• Bushing
Grease Fitting
Thrust Washer
Flat Washer, 3/8 x 2”
Lockwasher, M10
Screw, M10-1.5 x 20 mm Hex Head
Thrust Bearing
Spacer, Spindle
Steering Cylinder
• Seal Kit
Screw, 1/2-13 x 2-1/2” Hex Head
Flat Washer, 1/2
Bushing, Cylinder
Locknut, 1/2-13
Nut, M14-1.5 Hex
Ball Joint
• Grease Fitting
• Nut, 1/2-20 Slotted Hex
Grease Fitting, 90°
Ball Joint, Left Tie Rod
Ball Joint, Right Tie Rod
• Grease Fitting
• Nut, 1/2-20 Slotted Hex
Tie Rod
Nut, 5/8-18 Left Hand Thread Hex
Nut, 5/8-18 Hex
Cotter Pin, 1/8 x 1”
Flat Washer, 1/2
Spindle, Rear
Hub
• Bearing, Cup and Cone
• Seal, Grease
• Dust Cover
• Grease Fitting
Flat Washer, 3/4 x 1-5/8”
Nut, 3/4-16 Slotted Nut
Cotter Pin, 1/8 x 1-1/2”
Serial Numbers/Notes
Includes Grease Fitting and Nut
> Change from previous revision
55
TURFCAT T628D
Serial No. 69169 - All
13.1 4WD Steering
7
6
4
5
2
11
3
7
2
6
5
2
4
A
3
2
16
8
25
9
17
37
1 3
2
15
2
12
20
26
13
24
10
18
22
12
14
36
29
A
8
23
9
19
28
30
21
27
25
33
31
30
34
36
35
35
37
34
21
25
32
31
56
TURFCAT T628D
Item
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
Part No.
Qty.
Description
2196145.6
1
Rear Axle
108003
471214
361648
809174
800488
450213
2721223
173042
4118238
4118238-01
400416
445057
2203049
800602
800490
2721183
471213
445660
35027N
148058-02
148058-01
471213
445660
2193045.7
445664
443128
460028
452012
2721146.7
2721416-01
4114190-01
64162-08
450056
2722072.7
2722073.7
446154
450326
2720828.7
64025-35
6
3
2
2
2
2
2
2
1
1
1
3
1
1
1
1
1
1
1
1
1
1
1
1
1
1
3
2
2
1
1
1
8
1
1
8
8
2
2
• Bushing
Grease Fitting
Thrust Washer
Flat Washer, 3/8 x 2”
Lockwasher, M10
Screw, M10-1.5 x 20 mm Hex Head
Thrust Bearing
Spacer, Spindle
Steering Cylinder
• Seal Kit
Screw, 1/2-13 x 2-1/2” Hex Head
Flat Washer, 1/2
Bushing, Cylinder
Locknut, 1/2-13
Nut, M14-1.5 Hex
Ball Joint
• Grease Fitting
• Nut, 1/2-20 Slotted Hex
Grease Fitting, 90°
Ball Joint, Left Tie Rod
Ball Joint, Right Tie Rod
• Grease Fitting
• Nut, 1/2-20 Slotted Hex
Tie Rod
Nut, 5/8-18 Left Hand Thread Hex
Nut, 5/8-18 Hex
Cotter Pin, 1/8 x 1”
Flat Washer, 1/2
Plate, Motor
Wheel Motor, Left Rear
Wheel Motor, Right Rear
• Key, 5/16 x 1” Woodruff
Screw, M12-1.75 x 80 mm Hex Head
Bracket, Left Side Hose Brace
Bracket, Right Side Hose Brace
Lockwasher, M12
Nut, M12-1.75 Hex
Hub, Rear Wheel
Nut, 1-1/8-18 Hex
Serial Numbers/Notes
Includes Grease Fitting and Nut
See 46.1
See 46.1
> Change from previous revision
57
TURFCAT T628D
Serial No. All
14.1 Front Panel
2
6
7
20
3
16
17
7
18
1
7
5
15
7
12
5
4
5
13
7
7
11
4
5
12
5
5
12
10
19
9
8
21
24
22
23
28
29
25
33
29
28
28
30
32
27
31
34
29
28
35
28
7
27
27
26
12
58
6
5
14
TURFCAT T628D
Item
Part No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
Qty.
2721524.7
1
2198147
2198147-01
2198147-02
2198147-03
2198147-04
2198297
450016
450400
809152
450378
886425
446130
361001
2721829.7
363586
2721539
2721539-01
2721539-02
2721539-03
361005
48030N
NS
2722219.7
108194-09
108194-09
2198125
2722325
2722325
2722325
2722325
2722325
4195820
450149
450398
450376
2188154
48524
48228-06
148082-20
2198091
48228-10
1
1
1
1
2
1
2
14
2
12
1
1
1
1
8
1
1
1
1
2
1
1
1
1
2
3
1
1
1
1
1
1
8
13
8
1
1
2
1
2
2
Description
Serial Numbers/Notes
Front Panel
Air Cleaner
• Air Cleaner Element
• Valve, Dust Unload
• Cover
• Cover Clip
Clamp, Air Cleaner
Screw, M8-1.25 x 40 mm Hex Head
Flat Washer, M8
Flat Washer, M8
Nut, M8-1.25 Nylock
Horn
Lockwasher, 1/4
Nut, M6-1 Hex
Bracket, Fuel Manager
Screw, M8-1.25 x 20 mm Hex Head
Fuel Manager
• Fuel Filter Element
• Fuel Filter Bowl
• Hand Primer
Screw, M8-1.25 x 25 mm Hex Head
Hour Meter
• Bracket, Hour Meter
Bracket, Relay Mounting
Flex Trim
Flex Trim
Bumper
Interlock Relay
Seat Delay Module Relay
Fuel Relay
Starter Relay
PTO Disable Relay
Mower Wire Harness
Screw, M5-0.8 x 12 mm
Flat Washer, M5
Locknut, M5-0.8 Nylock
Module, Seat Delay
Circuit Breaker
Clamp, Harness
20 Amp Fuse
Boot, Terminal
Clamp, Harness
REFERENCE U6, See 47.1
REFERENCE U2, See 47.1
Cut to 3”
Cut to 2-3/4”
REFERENCE K1, See 47.1
REFERENCE K2, See 47.1
REFERENCE K3, See 47.1
REFERENCE K4, See 47.1
REFERENCE K5, See 47.1
REFERENCE U5, See 47.1
REFERENCE CB1, See 47.1
REFERENCE F1, See 47.1
Ciruit Breaker Wires
> Change from previous revision
59
TURFCAT T628D
Serial No. All
15.1 Radiator and Oil Cooler
17
6
22
18
23
16
17
1
2000739
9
18
5
7
15
5
7
9
8
13
20
23
19
7
14
21
12
13
19
2
4
3
5 7 13
12
12
13
11
12
60
12
12
10
5
7
18
TURFCAT T628D
Item
Part No.
Qty.
1
4186280
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
555867
4193021
142350-01
142350-02
361898
108194-13
64251-003
4185120
2000739
4188581
4188580
64139-20
450367
108194-06
108194-11
4195480.6
2192441.7
64237-05
64246-01
REF
48228-1A
2198175
38471-06
1
1
1
1
10
1
22
1
1
1
1
8
4
1
1
1
2
12
4
1
1
1
2
Description
Serial Numbers/Notes
Radiator and Oil Cooler
• Radiator Cap
Bracket, Overflow
Bracket, Left Recovery Tank
Bracket, Right Recovery Tank
Screw, M8-1.25 x 15 mm Hex Head
Flex Trim
Flat Washer, M8
Fan Shroud
• Decal, Fan Warning
Bracket, Left Side Fan Shroud
Bracket, Right Side Fan Shroud
Screw, M6-1 x 16 mm Whizlock
Insert, M6-1 Grip
Flex Trim
Flex Trim
Radiator Panel
Screen Guide
Nut, M8-1.25 Nylock
Nut, M6-1 Whizlock Nut
Recovery Tank
Clip, Cable
Screen
Foam, Closed Cell
Cut to 39”
Use Insert Tool 2196246
Cut to 13”
Cut to 16-1/2”
See Engine Parts Catalog
> Change from previous revision
61
TURFCAT T628D
Serial No. All
16.1 Engine Mounting
16
7
5
4
16
7
14
14
15
13
8
7
A
7
7
15
13
8
7
8
23
2
8
26
C
25
11
12
6
24
7
16
7
10
6 7
4
22
14
15
3
17
13
7
8
21
7
20
D
6
18
7
7
1
6
19
12
C
11
16
9
7
5
8
A
B
8
62
7
15
13
Part of Left
Frame Rail
8
8
14
D
Part of Right
Frame Rail
B
8
7
8
8
TURFCAT T628D
Item
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
Part No.
Qty.
REF
1
4204100
4204080
4204081
4204101
450217
64251-004
64237-03
2721459.7
2721460.7
64206-08
800488
2198132
3004526
361500
3000351
2722287-02
2721549
2198141
450190
446136
2308095
3970219
4125492
4192660
452380
1
1
2
2
8
24
20
1
1
8
8
4
8
8
4
1
1
1
1
1
1
1
1
1
4
Description
Engine and Pumps
Mount, Right Side Engine
Mount, Left Side Engine
Mount, Right Front, Left Rear Engine
Mount, Left Front, Right Rear Engine
Screw, M10-1.5 x 40 mm Hex Head
Flat Washer, M10
Locknut, M10-1.5 Nylon
Bracket, Left Side Hose
Bracket, Right Side Hose
Screw, M10-1.5 x 30 mm Hex Head
Lockwasher, M10
Isolation Mount
Washer, Isolation
Screw, M10-1.5 x 20 mm Hex Head
Screw, M10-1.5 x 80 mm Hex Head
Positive Battery Cable
Negative Battery Cable
Cable, Frame Ground
Screw, M8-1.25 x 15 mm Hex Head
Lockwasher, 5/16
Cover, Terminal
Cover, Terminal
Spacer, Fan
Fan, 15” 8 Blade
Screw, M6-1 x 30 mm Hex Flange
Serial Numbers/Notes
See 17.1
4WD Units Only
4WD Units Only
> Change from previous revision
63
TURFCAT T628D
Serial No. All
17.1 Engine and Pumps
34
35
36
NOTICE
33
37
WARRANTY
VOID IF SEAL IS
BROKEN
4117962
39
38
32
16
14 / 15
17
22
20
21
26
1
25
24
23
18
19
19
18
12
29
27
31
30
28
10
5
6
11
4
8
3
64
2
9
7
13
TURFCAT T628D
Item
Part No.
Qty.
Description
4182840
1
Kubota D1305-E3B Engine
29
30
31
32
33
34
35
36
37
38
4177262
5001284
4113994.7
450017
450378
362263
800488
22372
407587
REF
444310
172084
400218
452004
2208048
2208048-01
2208048-02
N/S
N/S
N/S
N/S
N/S
N/S
2198187
4215101
400408
452010
158061-24
2721334
2702707
2192505.7
400266
446142
2722389
148270
4192441
361005
446136
64163-29
553020
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
3
4
4
1
2
2
1
1
2
2
1
1
1
1
2
2
1
1
1
4
4
4
1
• Oil Filter
• Belt, Alternator-Water Pump
Bracket, Throttle
Screw, M8-1.25 x 30 mm Hex Head
Locknut, M8-1.25 Nylon
Screw, M10-1.25 x 20 mm Hex Head
Lockwasher, M10
Cable Clamp
Screw, #10-24 x 3/4” Slotted Hex
Throttle Cable
Nut, #10-24 Hex
Swivel, Cable Clamp
Screw, 5/16-24 x 1/2” Hex Head
Flat Washer, 5/16
Bell Housing Assembly
• Bell Housing
• Flange and Hardware Kit
• • Screw, M10 x 30 mm Socket
• • Screw, M8 x 30 mm Socket
• • Flat Washer, M8
• • Nut, M8 Hex
• • Screw, M10 x 35 mm Hex Head
• • Flat Washer, M10
Coupler, 13 Tooth Pump
Pump, Oil Gear
Screw, 1/2-13 x 1-1/2” Hex Head
Flat Washer, 1/2
O-Ring
Pump, Gear
• Seal Kit
Bracket, Control Cable
Screw, 3/8-16 x 1-1/2” Hex Head
Lockwasher, 3/8
Switch, Coolant Temperature
Temperature Sender
Muffler
Screw, M8-1.25 x 25 mm Hex Head
Lockwasher, 5/16
Flat Washer, 5/16
Gasket, Exhaust
39
4117962
1
Decal, Warranty Void
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
Serial Numbers/Notes
Includes Item 38
See 42.1
REFERENCE SW6, See 47.1
REFERENCE R2, See 47.1
Decal wrapped anound coolant
temperature switch and wires.
> Change from previous revision
65
TURFCAT T628D
Serial No. All
18.1 Fuel and Hydraulic Tanks
7
2
3
8
4
3
2
1
6
2
5
12
11 10
C
l
9
12
10 11
l
C
A
12
B
11 10
l
l
l
14
l
12
17
18
12
11
10
B
16
12
13
10
66
15
11 10
12
A
11
12
10
12 11
10
12 11
TURFCAT T628D
Item
Part No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
●
Qty.
2198248
1
361117
2198159
158122-01
2690025
2690017-03
339897
148027
2690017-02
339902
2192480.7
450213
363485
450401
2198188
2192479.7
2192478.7
2192477.7
450214
450379
3
2
1
1
1
1
1
1
1
1
12
12
16
1
1
1
1
2
2
Description
Serial Numbers/Notes
Tank, Hydraulic
• Bushing
• Fitting, 1/4” 90° Elbow
• Tube, Sight Glass
• Fitting, 3/8” 90° Elbow
• Plug, -06 ORB
• • O-Ring, -06
Breather Vent
Plug, -20 ORB
• O-Ring, -20
Mount, Hydraulic Tank
Screw, M10-1.5 x 20 mm Hex Head
Lockwasher, M10
Flat Washer, M10
Fuel Tank
Mount, Rear Fuel Tank
Mount, Upper Fuel Tank
Mount, Front Fuel Tank
Screw, M10-1.5 x 25 mm Hex Head
Nut, M10-1.5 Nylock
ROPS Mounting Hardware, See 11.1
> Change from previous revision
67
TURFCAT T628D
Serial No. All
19.1 Fuel System
10
14
23
7
12
5
7
7
24
25
13
10
4
3
10
17
18
6
19
10
2
15
10
7
16
8
7
20
9
11
8
1
7 8
9
9
9
22
68
21
TURFCAT T628D
Item
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
Part No.
Qty.
Description
Serial Numbers/Notes
554748
1
Fuel Hose
5/16” Hose 10’ Length, Cut to 4”
554748
554748
554748
554748
554752
4113022
3003704
361117
825624
2198159
REF
69051-05
108086-05
2208073
148081
402146
303916
2198091
4179802
5001182
REF
450017
4228960
450378
88042-01
1
1
1
1
1
7
3
4
4
1
1
2
2
1
1
5
5
1
1
1
1
1
1
1
1
Fuel Hose, Tank to Pre-Filter
Fuel Hose, Pre-Filter to Pump
Fuel Hose, Pump to Fuel Manager
Fuel Hose, Fuel Manager to Engine
Fuel Hose, Engine Return
Clamp, 5/16” Hose
Fitting, 5/16” 90° Elbow
Bushing
Hose Clamp
Fitting, 1/4” 90° Elbow
Fuel Manager
Plug, 1/4 NPTF
Fitting, 5/16” x 1/4 NPTF 90° Elbow
Sender, Fuel Level
Gasket
Screw, #10-24 x 1/2” Machine Screw
Star Washer
Boot, Terminal
Cap, Vented Fuel
Filter, Pre-Fuel
Fuel Tank
Screw, M8-1.25 x 45 mm Hex Head
Clamp, Filter
Nut, M8-1.25 Nylock
Clamp, 3/16 Hose
5/16” Hose 10’ Length, Cut to 30”
5/16” Hose 10’ Length, Cut to 21”
5/16” Hose 10’ Length, Cut to 19”
5/16” Hose 10’ Length, Cut to 14”
3/16” Hose 10’ Length, Cut to 22”
See 14.1
REFERENCE R3, See 47.1
See 18.1
> Change from previous revision
69
TURFCAT T628D
Serial No. All
20.1 Lift Cylinder and Chains
19
18
A
10
9
14
15
16
1
2
7
3
10
6 5
8
6
14
17
7
4
9
8
11
2000744
14
B
4
11
12
12
42
13
15 16
14
13
18
19
20
2
37
38
2
21
35
A
28
34
3
33
22
26
24
29
B
32
27
13
31
70
10
25
39
36
36
30
27
23
41
40
TURFCAT T628D
Item
Part No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
Qty.
192087.7
1
548604
445781
4200000
2000744
400264
453011
108031
461355
2198127
444762
2192291.7
2192289.7
444718
192086.7
196004
198003-01
193003
4250870
461377
4118636
4118636-01
2193027
2193028
4250871
400112
444708
400196
192091.7
2196093.7
2198126
400270
73017A
198002-01
2198094
4240902
4240903
2196138.7
328016
68156A
443810
548481
450005
446130
4200001
13
9
1
1
2
2
2
2
2
4
AR
2
6
4
2
1
1
2
2
1
1
1
1
1
1
1
2
4
1
2
2
4
2
2
1
1
1
2
1
1
1
2
2
1
Description
Serial Numbers/Notes
Bracket, Lift Pivot Mounting
Screw, 5/16-18 x 3/4” Hex Flange
Nut, 5/16-18 Whizlock Flange
Bracket, Pulley Mounting
Decal, Rotating Parts Warning
Screw, 3/8-16 x 1-1/4” Hex Head
Flat Washer, 3/8
Bearing, Notched Flange
Roll Pin, 1/8 x 1/2”
Tube, Spacer
Locknut, 3/8-16 Center
Shim, Cylinder Support
Bracket, Cylinder Support
Locknut, 5/16-18 Center
Guide, Chain
Pulley, Chain
• Bearing, Oilite
Shaft, Pulley
Thrust Washer
Roll Pin, 5/32 x 1-1/4”
Lift Cylinder
• Seal Kit
Shaft, Cylinder
Pin, Shaft Locking
Flat Washer, 1/4
Screw, 1/4-20 x 1” Hex Head
Locknut, 1/4-20 Center
Screw, 5/16-18 x 2” Hex Head
Arm, Chain Slack
Bracket, Slack Arms
Tube, 1/2 x 5/16 x 1-1/4”
Screw, 3/8-16 x 2” Hex Head
Idler Bushing
Chain, Lift
Spring, Extension
Lift Valve
• Seal Kit
Lift Lever
• Bushing
Handle-Knob
Nut, 3/8-16 Hex Jam
Master Link, #50 Chain
Screw, M6-1 x 50 mm Hex Head
Lockwasher, 1/4 Helical
Spacer, Lift Cylinder
> Change from previous revision
71
TURFCAT T628D
Serial No. 69168 - 1651 ~ 1778
Serial No. 69169 - 1651 ~ 1906
21.1 Hydraulic Valves
16
17
12
14
4
23
2
15
9 11 10
12
1
2
3
7
14
9
10
6
5
9 11
9
8
19
20
21
PRESSURE
00459
G
21
C
18
P
M1
RETURN
T
M2
00460
22
72
22
13
TURFCAT T628D
Item
Part No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
Qty.
Description
4114131
1
Valve, Hot Oil Shuttle
4114131-1
4114131-2
4114131-3
452004
450377
450005
148132
148132-01
2192383.7
445784
400190
809152
148034-06
2198134
444718
400190
142143.7
2198126
2198130
461393
4135584
355177
450400
00459
00460
4127564
1
1
1
4
2
2
1
1
2
4
2
8
4
4
4
2
2
2
1
1
1
2
2
1
1
1
• Plug, 0.088” Orifice
• Cartridge, Directional Control
• Seal Kit
Flat Washer, M6
Nut, M6-1 Nylock
Screw, M6-1 x 50 mm Hex Head
Steering Valve
• Seal Kit
Steering Valve Mount
Nut, 5/16-18 Whizlock Flange
Screw, 5/16-18 x 1-1/4” Hex Head
Flat Washer, 5/16
Grommet
Spacer, Tube
Locknut, 5/16 Center
Screw, 5/16-18 x 3” Hex Head
Clamp, Front
Spacer, Tube
Steering Wheel
Roll Pin, 1/4 x 2”
Deck Valve
Screw, M8-1.25 x 90 mm Hex Head
Flat Washer, M8
Decal, Pressure
Decal, Pressure
Decal, Steering Wheel Cap
Serial Numbers/Notes
4WD Units Only
4WD Units Only
4WD Units Only
See 45.1
> Change from previous revision
73
TURFCAT T628D
Serial No. 69168 - 1779 and Up
Serial No. 69169 - 1907 and Up
21.2 Hydraulic Valves
17
16
26
30
27
25
4
23
12 14
15
24
2
14 9
11 10
12
1
28
29 10
9 11
5
9
19
20
G
C
18
P
M1
T
21
M2
22
PRESSURE
00459
21
RETURN
00460
22
74
3
9
6
7
2
8
13
TURFCAT T628D
Item
Part No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
Qty.
Description
4114131
1
Valve, Hot Oil Shuttle
4114131-1
4114131-2
4114131-3
450389
450377
450005
4248151
4197940
4249470
4211400
400190
809152
148034-06
2198134
444718
400202
142143.7
2198126
2811364
2811365
4135584
355177
450400
00459
00460
4224460
450411
4248190
443828
4201840
450168
450410
2811547
1
1
1
4
2
2
1
1
2
4
2
8
4
4
4
2
2
2
1
1
1
2
2
1
1
4
4
1
1
1
4
4
4
• Plug, 0.088” Orifice
• Cartridge, Directional Control
• Seal Kit
Flat Washer, M6
Nut, M6-1 Nylock
Screw, M6-1 x 50 mm Hex Head
Steering Valve
• Seal Kit
Steering Valve Mount
Spacer, Steering Column
Screw, 5/16-18 x 1-1/4” Hex Head
Flat Washer, 5/16
Grommet
Spacer, Tube
Locknut, 5/16 Center
Screw, 5/16-18 x 3” Hex Head
Clamp, Front
Spacer, Tube
Steering Wheel
• Cap, Steering Wheel
Deck Valve
Screw, M8-1.25 x 90 mm Hex Head
Flat Washer, M8
Decal, Pressure
Decal, Pressure
Screw, M8-1.25 x 125 mm Hex Head
Lockwasher, M8
Shaft, Steering Column
• Nut, 5/8-18 Hex Jam
• Seal, Shaft
Screw, M6-1 x 12 mm Hex Head
Lockwasher, M6
Washer, Shaft
Serial Numbers/Notes
4WD Units Only
4WD Units Only
4WD Units Only
See 45.1
> Change from previous revision
75
TURFCAT T628D
Serial No. All
22.1 Pump Hydraulics
9
3
8
11
4
2
10
12
13
2
15
7
14
13
16
13
14
14
19
20
76
18
5
17
6
1
TURFCAT T628D
Item
Part No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
Qty.
Description
2198257
1
Hose, Tank Outlet
326799
158058-08
339903
2198295
178025
2690032-01
2198294
2192518.7
548604
450192
446136
2198202
830930
367458
2692292-01
2692232-05
158058-01
339898
158058-12
339900
158058-15
339898
2198254
2
1
1
1
1
1
1
1
3
3
3
1
3
3
1
1
1
1
1
1
1
1
1
Clamp, Hose
Fitting, -24 ORB 90° Barbed
• O-Ring, -12
Filter Head
Filter, Spin On
Fitting, 1/8 NPT 90° Street El
Gauge, Filter Vacuum
Bracket, Filter
Screw, 5/16-18 x 3/4” Whizlock
Screw, M8-1.25 x 25 mm Hex Head
Lockwasher, 5/16 Heavy
Inlet Manifold
Clamp, 1/2 to 1-1/4” Hose
Clamp, 3/4 to 1-3/4” Hose
Hose, 3/4” ID x 8” Wire Reinforced
Hose, 1-1/4” ID x 9” Wire Reinforced
Fitting, -8 ORB 90° Barbed
• O-Ring, -8
Fitting, -12 ORB 90° Barbed
• O-Ring, -12
Fitting, -8 ORB 90° Barbed
• O-Ring, -8
Hose, Case Drain
Serial Numbers/Notes
> Change from previous revision
77
TURFCAT T628D
Serial No. All
23.1 2WD Traction Hydraulics
3
3
5
6
4
3
1
2
1
1
Item
Part No.
1
2
3
4
5
6
Qty.
Description
340067
4
Fitting, -8 ORFS x -10 ORB 90°
339910
339899
2692223-09
2692223-06
339984
339910
339898
340120
339910
340264
339910
339898
1
1
1
3
1
1
1
1
2
1
2
1
• O-Ring, -8 ORFS
• O-Ring, -10 ORB
Hose, Front Wheel Motor
Hose, Front Wheel Motor
Fitting, -8 ORFS x -8 ORB Straight
• O-Ring, -8 ORFS
• O-Ring, -8 ORB
Fitting, -8 ORFS Run Tee
• O-Ring, -8 ORFS
Fitting, -8 ORFS x -8 ORB Tee
• O-Ring, -8 ORFS
• O-Ring, -8 ORB
Serial Numbers/Notes
> Change from previous revision
78
TURFCAT T628D
Serial No. All
24.1 2WD Drain Hydraulics
3
4
1
2
5
Item
Part No.
Qty.
Description
Serial Numbers/Notes
1
340263
1
Fitting, -6 ORFS x -6 ORB Tee
2
3
4
339909
339897
2692217-16
2692250-01
830930
2
1
1
1
1
• O-Ring, -6 ORFS
• O-Ring, -6 ORB
Cutting Unit Motor Drain
Hose, Motor Case Drain
Clamp, 1/2 to 1-1/4” Hose
Connect to cutting unit motor
5
339941
1
Plug, -6 ORFS
Plug removed when cutting unit is
installed.
339909
1
• O-Ring, -6 ORFS
> Change from previous revision
79
TURFCAT T628D
Serial No. All
25.1 4WD Hydraulics
13
12
13
24
10
11
13
10
12
11
11
23
11
14
16
2
5
17
13
1
18
9
7
20
19
6
4
21
8
4
5
3
22
2
15
4WD Drain Hydraulics
4
80
TURFCAT T628D
Item
Part No.
Qty.
Description
340264
1
Fitting, -8 ORFS x -8 ORB Tee
14
339910
339898
2692223-09
2692223-06
340067
339910
339899
340120
339910
2692215-29
339979
339909
339897
2692222-06
2692222-07
340168
339910
339962
2692299-01
339984
339910
339898
2692222-08
2
1
2
1
4
1
1
1
2
1
1
1
1
1
1
4
2
1
4
1
1
1
1
• O-Ring, -8 ORFS
• O-Ring, -8 ORB
Hose, Wheel Motor
Hose, Wheel Motor
Fitting, -8 ORFS x -10 ORB 90°
• O-Ring, -8 ORFS
• O-Ring, -10 ORB
Fitting, -8 ORFS Run Tee
• O-Ring, -8 ORFS
Hose, Wheel Motor to Hot Oil Shuttle
Fitting, -6 ORFS x -6 ORB Straight
• O-Ring, -6 ORFS
• O-Ring, -6 ORB
Hose, Wheel Motor
Hose, Wheel Motor
Fitting, -8 ORFS 90° Bulkhead
• O-Ring, -8 ORFS
• Locknut, Bulkhead
Hose, Rear Wheel Motor
Fitting, -8 ORFS x -8 ORB Straight
• O-Ring, -8 ORFS
• O-Ring, -8 ORB
Hose, Wheel Motor
15
339941
1
Plug, -6 ORFS
339909
340144
339910
2692215-28
340061
339909
339897
830930
69213-03
340096
339909
339897
2692217-16
2721459.7
2721460.7
1
1
2
1
1
1
1
1
1
1
2
1
1
1
1
• O-Ring, -6 ORFS
Fitting, -8 ORFS Branch Tee
• O-Ring, -8 ORFS
Hose, Hot Oil Shuttle
Fitting, -6 ORFS x -6 ORB 90°
• O-Ring, -6 ORFS
• O-Ring, -6 ORB
Clamp, 1/2 to 1-1/4” Hose
Hose,Hot Oil Shuttle Return
Fitting, -6 ORFS x -6 ORB Branch Tee
• O-Ring, -6 ORFS
• O-Ring, -6 ORB
Hose, Cutting Unit Motor Return
Bracket, Left Side Hose
Bracket, Right Side Hose
1
2
3
4
5
6
7
8
9
10
11
12
13
16
17
18
19
20
21
22
23
24
Serial Numbers/Notes
Plug removed when cutting unit is
installed.
See 16.1
See 16.1
> Change from previous revision
81
TURFCAT T628D
Serial No. 69168 - 1651~1778
Serial No. 69169 - 1651~1906
26.1 Steering and Lift Hydraulics
2WD Units
4WD Units
5
5
A
A
B
B
7
6
6
B
3
A
4
2
1
11
16
15
10
18
89
6
17
14
13
12
6
To Lift Valve P Port
5
Aux
To Lift Valve
T Port
Out
In
LT
RT
To Steering
Cylinder
82
From Gear
Pump
TURFCAT T628D
Item
Part No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
Qty.
Description
339980
1
Fitting, -6 ORFS x -8 ORB Straight
339909
339898
2692231-02
2692269-01
2692269-02
340061
339909
339897
339979
339909
339897
2198218
69068-06
158061-01
2692247-01
340062
339909
339898
69206-05
2692215-22
2692245-01
340264
339910
339898
2692219-03
339984
339910
339898
340026
339909
339897
1
1
1
1
1
2
1
1
3
1
1
1
1
1
1
1
1
1
1
1
1
1
2
1
1
1
1
1
1
1
1
• O-Ring, -6 ORFS
• O-Ring, -8 ORB
Hose, Power Steering
Hose, Steering Cylinder Base Port
Hose, Steering Cylinder Rod Port
Fitting, -6 ORFS x -6 ORB 90°
• O-Ring, -6 ORFS
• O-Ring, -6 ORB
Fitting, -6 ORFS x -6 ORB Straight
• O-Ring, -6 ORFS
• O-Ring, -6 ORB
Tube, Steering Cylinder
Orifice Disk
O-Ring, -6 ORFS
Hose, Steering Valve to Lift Valve
Fitting, -6 ORFS x -8 ORB 90°
• O-Ring, -6 ORFS
• O-Ring, -8 ORB
Hose, Lift Cylinder Base Port
Hose, Lift Cylinder Rod Port
Hose, Steering Valve Return
Fitting, -8 ORFS x -8 ORB Tee
• O-Ring, -8 ORFS
• O-Ring, -8 ORB
Hose, Lift Valve Return
Fitting, -8 ORFS x -8 ORB Straight
• O-Ring, -8 ORFS
• O-Ring, -8 ORB
Fitting, -6 ORFS x -6 ORB 45°
• O-Ring, -6 ORFS
• O-Ring, -6 ORB
Serial Numbers/Notes
Power Steering Valve Port In
Power Steering Valve Port RT
Power Steering Valve Port LT
2WD Units Only
Power Steering Valve Port Aux
Power Steering Valve Port Out
> Change from previous revision
83
TURFCAT T628D
Serial No. 69168 - 1779 and Up
Serial No. 69169 - 1906 and Up
Serial No. 69175 - 1651 and Up
Serial No. 69176 - 1651 and Up
26.2 Steering and Lift Hydraulics
2WD Units
4WD Units
5
5
A
A
B
B
7
6
6
B
3
A
4
2
1
11
16
15
10
18
89
6
17
14
13
12
To Lift Valve P Port
(Item 10)
To Steering
Cylinder
(Item 3)
E
L
To Steering
Cylinder
(Item 4)
84
To Lift Valve
T Port
(Item 14)
T P
5
R
6
From Gear
Pump
(Item 2)
TURFCAT T628D
Item
Part No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
Qty.
Description
339980
1
Fitting, -6 ORFS x -8 ORB Straight
339909
339898
4249471
4249473
4249474
340061
339909
339897
339979
339909
339897
2198218
69068-06
158061-01
4249475
340062
339909
339898
69206-05
2692215-22
4249472
340264
339910
339898
2692219-03
339984
339910
339898
340026
339909
339897
1
1
1
1
1
2
1
1
3
1
1
1
1
1
1
1
1
1
1
1
1
1
2
1
1
1
1
1
1
1
1
• O-Ring, -6 ORFS
• O-Ring, -8 ORB
Hose, Power Steering
Hose, Steering Cylinder Base Port
Hose, Steering Cylinder Rod Port
Fitting, -6 ORFS x -6 ORB 90°
• O-Ring, -6 ORFS
• O-Ring, -6 ORB
Fitting, -6 ORFS x -6 ORB Straight
• O-Ring, -6 ORFS
• O-Ring, -6 ORB
Tube, Steering Cylinder
Orifice Disk
O-Ring, -6 ORFS
Hose, Steering Valve to Lift Valve
Fitting, -6 ORFS x -8 ORB 90°
• O-Ring, -6 ORFS
• O-Ring, -8 ORB
Hose, Lift Cylinder Base Port
Hose, Lift Cylinder Rod Port
Hose, Steering Valve Return
Fitting, -8 ORFS x -8 ORB Tee
• O-Ring, -8 ORFS
• O-Ring, -8 ORB
Hose, Lift Valve Return
Fitting, -8 ORFS x -8 ORB Straight
• O-Ring, -8 ORFS
• O-Ring, -8 ORB
Fitting, -6 ORFS x -6 ORB 45°
• O-Ring, -6 ORFS
• O-Ring, -6 ORB
Serial Numbers/Notes
Steering Valve Port P
Steering Valve Port R
Steering Valve Port L
2WD Units Only
Steering Valve Port E
Steering Valve Port T
> Change from previous revision
85
TURFCAT T628D
Serial No. All
27.1 Deck Valve Hydraulics
7
9
10
8
15
8
6
13
11
1
A
16
12
B
22
20
19
2
14
24
21
G
A
4
24
5
C
P
M1
B 3
T
A
18
5
B
23
60” Flail
M2
A
16
3
B
17
24
23
86
24
60” Rear Discharge
63” Side Discharge
72” Rear Discharge
72” Side Discharge
TURFCAT T628D
Item
Part No.
Qty.
Description
1
340070
2
Fitting, -10 ORFS x -10 ORB 90°
2
3
339911
339899
178112-09
339989
339911
339899
1
1
1
2
1
1
• O-Ring, -10 ORFS
• O-Ring, -10 ORB
Hose, Pump to Deck Valve
Fitting, -10 ORFS x -10 ORB Straight
• O-Ring, -10 ORFS
• O-Ring, -10 ORB
4
339923
2
Cap, -10 ORFS
5
16
17
17
340073
339912
339899
2692244-01
339993
339912
339899
830930
108091-11
4199840
367458
2198255
326799
4228940
2690016-01
339899
2692217-16
2692295-02
2692295-03
1
1
1
1
1
1
1
2
1
1
1
1
1
1
1
1
1
2
2
Fitting, -12 ORFS x -10 ORB 90°
• O-Ring, -12 ORFS
• O-Ring, -10 ORB
Hose, Deck Valve to Oil Cooler
Fitting, -12 ORFS x -10 ORB Straight
• O-Ring, -12 ORFS
• O-Ring, -10 ORB
Hose Clamp, 1/2 - 1-1/4” dia.
Hose, 3/4” I.D. x 48” Long
Tube, Oil Cooler to Tank
Hose Clamp, 3/4 - 1-3/4” dia.
Hose, Tank Return
Hose Clamp, 2-1/2”
Test Fitting
Fitting, -10 ORB x 3/4” Barbed
• O-Ring, -10 ORB
Hose, Cutting Unit Motor Return
Hose, Deck Valve to Deck Motor
Hose, Deck Valve to Deck Motor
17
2692295-04
2
Hose, Deck Valve to Deck Motor
18
340059
339909
1
1
Fitting, -6 ORFS x -4 ORB 90°
• O-Ring, -6 ORFS
339896
1
• O-Ring, -4 ORB
2692238-06
2692238-05
339977
339909
339896
2692286-02
2218152-05
2218152-04
340070
339911
339899
1
1
1
1
1
1
1
1
2
1
1
Hose, Deck Valve to Flail Motor
Hose, Flail Motor to Deck Valve
Fitting, -6 ORFS x -4 ORB Straight
• O-Ring, -6 ORFS
• O-Ring, -4 ORB
Hose, Flail Motor Drain
Motor, 20.8 cc Cutting Unit
• Seal Kit
Fitting, -10 ORFS x -10 ORB 90°
• O-Ring, -10 ORFS
• O-Ring, -10 ORB
6
7
8
9
10
11
12
13
14
15
19
20
21
22
23
24
Serial Numbers/Notes
Caps removed when cutting unit is
installed.
See 24.1 or 25.1
956023 - 60” Rear Discharge Only
956314 - 63” Side Discharge Only
957233 - 72” Side Discharge
957234 - 72” Rear Discharge
956023 - 60” Rear Discharge
956314 - 63” Side Discharge
957233 - 72” Side Discharge
957234 - 72” Rear Discharge
956025 - 60” Flail Only
Parts included with and are
common to all cutting units
> Change from previous revision
87
TURFCAT T628D
Serial No. All
28.1 Hydraulic Clamps
9
13
4 6 5
2WD Units
8
7
11
12
10
4WD Units
10
9
Oil
Cooler
8
14
4WD Units
3
2
1
1
Steering
Cylinder
2
1
Lift
Valve
Lift
Cylinder Steering
Valve
Traction
Pump
Deck
Valve
88
TURFCAT T628D
Item
1
2
3
4
5
6
7
8
9
10
11
12
13
14
Part No.
Qty.
Description
65362-04
3
Rubber, Clamp
326112
326799
108138-02
452390
446136
400120
452004
445770
148090-03
450015
2722141.7
450378
64123-105
2
1
1
1
1
1
3
2
2
1
1
1
1
Clamp, Hose
Clamp, Hose
Hose Clamp
Screw, M8-1.25 x 30 mm Hex Head
Lockwasher, 5/16
Screw, 1/4-20 x 2” Hex Head
Flat Washer, 1/4
Nut, 1/4-20 Hex Nylock
Hose Support
Screw, M8-1.25 x 35 mm Hex Head
Bracket, Hose
Nut, M8-1.25 Hex Nylock
Screw, 1/4-20 x 1-5/8” Hex Head
Serial Numbers/Notes
10” Length, Cut to fit clamp
2WD Units Only
2WD Units Only
2WD Units Only
4WD Units Only
4WD Units Only
4WD Units Only
4WD Units Only
4WD Units Only
4WD Units Only
4WD Units Only
> Change from previous revision
89
TURFCAT T628D
Serial No. 956023 - All
Serial No. 956314 - All
Serial No. 957233 - All
Serial No. 957234 - All
29.1 Deck Attachment
15
15
16
16
14
12
13
8
9
10
11
4
17
5
6
4
7
12
12
10
9
1
76
4
5
2
3
3
2
1
90
TURFCAT T628D
Item
1
2
3
4
5
6
7
8
9
10
11
12
13
14
14
15
16
17
Part No.
Qty.
64123-133
2
446166
443128
64141-4
400262
310711
23009A
400266
400190
366653
445816
2198162
2192762.7
2192763.7
2192777.7
64139-14
64141-6
523126
2
2
6
2
2
2
2
2
2
2
2
2
2
2
8
10
2
Description
Serial Numbers/Notes
Screw, 5/8-18 x 3” Hex Head
Lockwasher, 5/8
Nut, 5/8-18 Hex
Nut, 3/8-16 Whiz Lock Flange
Screw, 3/8-16 x 1” Hex Head
Flat Washer, 3/8
Spacer
Screw, 3/8-16 x 1-1/2” Hex Head
Screw, 5/16-18 x 1-1/4” Hex Head
Spacer
Nut, 5/16-18 Nylock
Spring, Extension
Plate, Deck Stop
Bracket, Deck Stop
Bracket, Deck Stop
Screw, 5/16-18 x 7/8” Flange Head
Nut, 5/16-18 Whiz Lock Flange
Bumper, Rubber
Side Discharge Decks
Rear Discharge Decks
> Change from previous revision
91
TURFCAT T628D
Serial No. 956314 - All
Serial No. 957233 - All
30.1 Deck Decals
Side Discharge Decks
A Textron Company
7
Height of Cut Chart
CASTER
MOUNT
By Jacobsen
LOW
SPACERS
8
HIGH
1
4
2
5
3
6
Caster Mount
LOW
LOW
LOW
LOW
LOW
LOW
LOW
LOW
HIGH
HIGH
HIGH
HIGH
HIGH
HIGH
HIGH
HIGH
Spacers
0
1/4” (1)
1/2” (1)
1/2” (1); 1/4” (1)
1/2” (2)
1/2” (2); 1/4” (1)
1/2” (3)
1/2” (3); 1/4” (1)
0
1/4” (1)
1/2” (1)
1/2” (1); 1/4” (1)
1/2” (2)
1/2” (2); 1/4” (1)
1/2” (3)
1/2” (3); 1/4” (1)
Hanger Hole
1
1
2
2
2
3
3
3
4
4
4
5
5
6
6
6
Spacers
1“
1-1/4”
1-1/2“
1-3/4”
2“
2-1/4”
2-1/2“
2-3/4”
3“
3-1/4”
3-1/2“
3-3/4”
4“
4-1/4”
4-1/2“
4-3/4”
ACTUAL HEIGHT MAY VARY DUE TO TIRE PRESSURE AND CONDITION
SEE OPERATOR’S MANUAL FOR MORE INFORMATION.
DECK HANGER
2000764
2
2000638
3
2
3
5
1
6
2000746
1
1
6
4
1
38
64
41
6
7/8
5
2000655
4
TIRE PRESSURE
14 PSI
5
Item
●◆
◆
●
●
●
●
◆
Part No.
1
2
3
4
5
6
7
8
Qty.
Description
2000746
2
Decal, Hook Latch
2000764
2000638
2000655
00253
4164381
4124792
4137628
1
1
1
2
1
1
1
Decal, Height of Cut
Decal, Rotating Parts/Blade
Decal, Read Manual
Decal, 14 PSI
Decal, Blade Contact/Thrown Object
Decal, Jacobsen
Decal, Ransomes
Serial Numbers/Notes
Included with Decks 2721961 (63” Side Discharge) and 2721963 (72” Side Discharge)
Included with Belt Covers 2721965 (63” Side Discharge) and 2721967 (72” Side Discharge)
> Change from previous revision
92
TURFCAT T628D
Serial No. 956023 - All
Serial No. 957234 - All
31.1 Deck Decals
Rear Discharge Decks
A Textron Company
7
Height of Cut Chart
CASTER
MOUNT
By Jacobsen
LOW
SPACERS
8
6
HIGH
1
4
2
5
3
6
Caster Mount
LOW
LOW
LOW
LOW
LOW
LOW
LOW
LOW
HIGH
HIGH
HIGH
HIGH
HIGH
HIGH
HIGH
HIGH
Spacers
0
1/4” (1)
1/2” (1)
1/2” (1); 1/4” (1)
1/2” (2)
1/2” (2); 1/4” (1)
1/2” (3)
1/2” (3); 1/4” (1)
0
1/4” (1)
1/2” (1)
1/2” (1); 1/4” (1)
1/2” (2)
1/2” (2); 1/4” (1)
1/2” (3)
1/2” (3); 1/4” (1)
Hanger Hole
1
1
2
2
2
3
3
3
4
4
4
5
5
6
6
6
Spacers
1“
1-1/4”
1-1/2“
1-3/4”
2“
2-1/4”
2-1/2“
2-3/4”
3“
3-1/4”
3-1/2“
3-3/4”
4“
4-1/4”
4-1/2“
4-3/4”
ACTUAL HEIGHT MAY VARY DUE TO TIRE PRESSURE AND CONDITION
SEE OPERATOR’S MANUAL FOR MORE INFORMATION.
DECK HANGER
2000764
2
2000638
3
5
3
2000746
1
1
1
2
4
6
5
7/8
2000655
6
4
TIRE PRESSURE
14 PSI
5
Item
●◆
◆
●
●
●
●
◆
Part No.
1
2
3
4
5
6
7
8
Qty.
Description
2000746
2
Decal, Hook Latch
2000764
2000638
2000655
00253
4164381
4124792
4137628
1
1
1
2
1
1
1
Decal, Height of Cut
Decal, Rotating Parts/Blade
Decal, Read Manual
Decal, 14 PSI
Decal, Blade Contact/Thrown Object
Decal, Jacobsen
Decal, Ransomes
Serial Numbers/Notes
Included with Decks 2721960 (60” Rear Discharge) and 2721962 (72” Rear Discharge)
Included with Belt Covers 2721964 (60” Rear Discharge) and 2721966 (72” Rear Discharge)
> Change from previous revision
93
TURFCAT T628D
Serial No. 956314 - All
Serial No. 957233 - All
32.1 Belt Cover
Side Discharge Decks
4
7
7
6
4
1
7
7
6
5
4
3
10
10
5
8
9
10
5
10
Item
1
1
2
2
3
3
4
5
5
6
7
8
9
10
Part No.
Qty.
2721964
1
2721966
2192719.7
2192672.7
2192720.7
2192673.7
64215-05
178111
178111
32418-04
64215-07
2192671.7
64197-016
48517-06
1
1
1
1
1
10
2
3
2
4
1
2
4
Description
2
Serial Numbers/Notes
Belt Cover
63” Side Discharge Decks
Belt Cover
Left Side Belt Cover Plate
Left Side Blet Cover Plate
Right Side Belt Cover Plate
Right Side Belt Cover Plate
Pop Rivet, #64
Spring Latch
Spring Latch
Handle
Pop Rivet, #84
Bracket, Latch
Screw, 3/8-16 x 1/2” Thread Forming
Hole Plug, 1/4”
72” Side Discharge Decks
63” Side Discharge Decks
72” Side Discharge Decks
63” Side Discharge Decks
72” Side Discharge Decks
63” Side Discharge Decks
72” Side Discharge Decks
72” Side Discharge Decks Only
72” Side Discharge Decks Only
> Change from previous revision
94
TURFCAT T628D
Serial No. 956023 - All
Serial No. 957234 - All
33.1 Belt Cover
Rear Discharge Decks
4
4 7
7
6
7
5
8
6
7
4
4
3
1
8
5
2
Item
Part No.
1
1
2
2
3
3
4
5
6
7
8
Qty.
2721964
1
2721966
2192334.7
2192318.7
2192335.7
2192319.7
64215-05
178111
32418-04
64215-07
48517-06
1
1
1
1
1
10
2
2
4
4
Description
Serial Numbers/Notes
Belt Cover
60” Rear Discharge Decks
Belt Cover
Left Side Belt Cover Plate
Left Side Blet Cover Plate
Right Side Belt Cover Plate
Right Side Belt Cover Plate
Pop Rivet, #64
Spring Latch
Handle
Pop Rivet, #84
Hole Plug, 1/4”
72” Rear Discharge Decks
60” Rear Discharge Decks
72” Rear Discharge Decks
60” Rear Discharge Decks
72” Rear Discharge Decks
> Change from previous revision
95
TURFCAT T628D
Serial No. 956023 - All
Serial No. 956314 - All
Serial No. 957233 - All
Serial No. 957234 - All
34.1 Push Arms
17
19
24
2
3
12
18
23
10 9
2
3
2
3
11
3
8
6
18
2
3
14
3
8
2
19
1
14
17
2
3
3
14
15
11
7
2
2
2
3
3
3
18
18
5
14
9
10
4
20
14
2
3
3
7
16
2
3
3
13
14
96
3
2
2
TURFCAT T628D
Item
1
2
3
4
5
6
7
8
9
10
11
12
12
12
13
13
13
14
15
16
17
18
19
20
20
20
20
21
22
23
24
Part No.
Qty.
2196178.7
1
3003926
452008
2196177.7
2192713.7
2192714.7
2192774.7
2196176.7
2196180.7
64139-14
445816
2192725.7
2192727.7
2192716.7
2192724.7
2192726.7
2192715.7
64237-03
2192565.7
2192576.7
3000352
2192267.7
471214
2721960
2721961
2721962
2721963
4191260
4192161
461495
460335
26
34
1
1
1
2
2
2
2
2
1
1
1
1
1
1
10
1
1
2
AR
4
1
1
1
1
1
1
1
2
Description
Serial Numbers/Notes
Mount, Right Side Push Arm
Screw, M10-1.5 x 30 mm Hex Head
Flat Washer, 3/8
Mount, Left Side Push Arm
Bracket, Left Side Push Arm
Bracket, Right Side Push Arm
Bracket, Deck Stop
Push Arm
Pin, Push Arm
Screw, 5/16-18 x 7/8” Flange Head
Nut, 5/16-18 Hex Head
Bracket, Right Side Mount Brace
Bracket, Right Side Mount Brace
Bracket, Right Side Mount Brace
Bracket, Left Side Mount Brace
Bracket, Left Side Mount Brace
Bracket, Left Side Mount Brace
Nut, M10-1.5 Nylock Hex
Bracket, Right Side Height Adjust
Bracket, Left Side Height Adjust
Screw, M10-1.5 x 60 mm Hex Head
Spacer, Height Adjust
Grease Fitting, Striaght
60” Rear Discharge Deck
63” Side Discharge Deck
72” Rear Discharge Deck
72” Side Discharge Deck
• Right Side Roller Support
• Left Side Roller Support
Clevis Pin, 1/2 x 2-5/8”
Hair Pin, Cotter
Used on 60” Rear Discharge Decks
Used on 63” Side Discharge Decks
Used on 72” Decks
Used on 60” Rear Discharge Decks
Used on 63” Side Discharge Decks
Used on 72” Decks
Used on 60” Rear Discharge Decks
Used on 63” Side Discharge Decks
Used on 72” Rear Discharge Decks
Used on 72” Side Discharge Decks
> Change from previous revision
97
TURFCAT T628D
Serial No. 956023 - All
Serial No. 956314 - All
Serial No. 957233 - All
Serial No. 957234 - All
35.1 Deck Drive
38
15
28
14
13
22
39
23
24
21
20
18
25
16
12
26
1
4
15
14
13
15
14
13
39
19
3
7
27
17
16
12
1
31
39
29
30
2
12
16
4
5
1
34
35
36
6
37
33
11
8
32
10
11
9
11
10
9
8
8
10
9
98
TURFCAT T628D
Item
1
2
3
4
5
6
7
8
8
8
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
28
28
29
30
31
32
33
34
35
36
37
38
39
Part No.
Qty.
4131977
3
4131975
33179-02
4131974
458115
38315
471216
112243-03
112243-04
112111-05
112111-04
33049-05
453020
64163-12
62464-7A
198027
64209-03
443128
64197-005
2720273.7
65103A
35027N
365409
458040
400442
446154
128169
85006-1A
3000352
64246-03
2198121
198037
2720948
400416
445057
128169
64229-05
192107.7
361619
800488
452008
810149
REF
354774
1
1
2
1
1
1
3
3
3
3
3
3
6
3
3
3
3
18
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
1
1
1
1
1
1
1
1
3
Description
Serial Numbers/Notes
Spindle Housing Assembly
• Spindle Housing
• Spindle
• Bearing, Sealed
• Snap Ring, 2-9/32” Internal
• Nut, Spindle
• Grease Fitting. Straight
Blade, Low Lift21”
Blade, Low Lift 25”
Blade, High Lift 22”
Blade, High Lift 25”
Blade Bolt
Flat Washer, 5/8”
Flat Washer
Washer, Thrust
Pulley, 6” Diameter
Spring Washer
Nut, 5/8-11 Hex
Screw, 3/8-16 x 1-1/4” Hex Head
Belt Idler
• Bearing Bushing
• Grease Fitting, 90°
Flat Washer, 7/8”
Snap Ring, 7/8” External
Screw, 1/2-20 x 1-1/2” Hex Head
Lockwasher, 1/2 Heavy
Pulley, Idler
Spring, Mule Jack
Screw, M10-1.5 x 60 mm Hex Head
Nut, M10-1.5 Whiz Lock Flange
Belt, 125” Deck Drive
Belt, 127-1/2” Deck Drive
Belt, 134-1/4” Deck Drive
Screw, 1/2-13 x 2-1/2” Hex Head
Flat Washer, 1/2
Pulley, Idler
Nut, 1/2-13 Nylock Hex
Bracket, Mounting
Screw, M10-1.5 x 25 mm Hex Head
Lockwasher, M10
Flat Washer, 3/8
Bumper, Rubber
Deck Motor Assembly
Key, 1/4 x 1/4 x 1”
Used on 60” Rear Discharge Deck
Used on 72” Rear Discharge Deck
Used on 63” Side Discharge Deck
Used on 72” Side Discharge Deck
Used on 60” Rear Discharge Deck
Used on 63” Side Discharge Deck
Used on 72” Decks
Used on 72” Decks Only
Used on 72” Decks Only
Used on 72” Decks Only
Used on 72” Decks Only
See 36.1
> Change from previous revision
99
TURFCAT T628D
Serial No. 956023 - All
Serial No. 956314 - All
Serial No. 957233 - All
Serial No. 957234 - All
36.1 Deck Drive
9
9
13
11
12
10
9
9
13
2
17
10
PRESSURE
00459
9
17
18
9
3
RETURN
00460
18
8
10
10
14
7
1
10
4
6
10
9
5
15 16
16
15
3
15
15
16
3
15
15
3
100
TURFCAT T628D
Item
Part No.
1
2
3
4
5
5
6
7
7
7
8
8
8
9
10
11
11
12
12
13
14
14
15
16
17
18
Qty.
2192579.7
1
2218152-05
2218152-04
3003926
64246-03
2198229
2198228
354774
2192769.7
2192721.7
2192650.7
2192770.7
2192722.7
2192651.7
400262
445806
2196212.7
4204642
2192305.7
2192317.7
453011
2192390.7
2192239.7
452008
64237-03
00459
00460
1
1
10
2
1
1
1
1
1
1
1
1
12
12
1
1
1
1
3
1
1
16
8
1
1
Description
Serial Numbers/Notes
Bracket, Gear Motor
Motor, 20cc
• Seal Kit
Screw, M10-1.5 x 30 mm Hex Head
Nut, M10-1.5 Whiz Lock
Pulley, 6-1/2”
Pulley, 5-1/2”
Key, 1/4 x 1/4 x 1”
Mount, Left Side Motor
Mount, Left Side Motor
Mount, Left Side Motor
Mount, Right Side Motor
Mount, Right Side Motor
Mount, Right Side Motor
Screw, 3/8-16 x 1” Hex Head
Locknut, 3/8-16 Hex
Top Mount
Top Mount
Brace, Deck Anchor
Brace, Deck Anchor
Flat Washer, 3/8
Deck Hook
Deck Hook
Flat Washer, 3/8
Nut, M10-1.5 Nylock Hex
Decal, Pressure
Decal, Return
Used on 60” and 63” Decks
Used on 72” Decks
Used on 60” Rear Discharge Decks
Used on 63” Side Discharge Decks
Used on 72” Decks
Used on 60” Rear Discharge Decks
Used on 63” Side Discharge Decks
Used on 72” Decks
Used on 60” and 63” Decks
Used on 72” Decks
Used on 60” and 63” Decks
Used on 72” Decks
Used on 60” and 63” Decks
Used on 72” Decks
> Change from previous revision
101
TURFCAT T628D
Serial No. 956314 - All
Serial No. 957233 - All
37.1 Discharge Chute
Side Discharge Decks
5
4
1
2
6
3
Item
Part No.
1
1
2
3
4
5
6
Qty.
Description
Serial Numbers/Notes
176098.7
1
Discharge Chute
63” Side Discharge Decks
146127.7
400188
445816
172257.7
64139-08
64141-6
1
2
2
2
4
4
Discharge Chute
Screw, 5/16-18 x 1” Hex Head
Locknut, 5/16-18 Nylon
Stop-Chute
Screw, 5/16-18 x 3/4” Flange Head
Nut, 5/16-18 Whiz Lock Flange
72” Side Discharge Decks
> Change from previous revision
102
TURFCAT T628D
Serial No. 956023 - All
Serial No. 957234 - All
38.1 Foot Guards
Rear Discharge Decks
72” Decks
2
4
60” Decks
3
3
4 4
3
4
3
2
4
3
10
8
7
6
5
4 3
4
7
9
3
1
Item
1
2
2
3
3
4
4
5
6
7
8
9
10
Part No.
Qty.
Description
2192230.7
1
Left Side Foot Guard
2192229.7
2192231.7
361619
361619
452008
452008
118107
112378.7
453023
64123-114
445805
64237-03
1 Right Side Foot Guard
1 Right Side Foot Guard
6 Screw, M10-1.5 x 25 mm Hex Head
4 Screw, M10-1.5 x 25 mm Hex Head
6 Flat Washer, 3/8
4 Flat Washer, 3/8
1 Brush
1 Retainer, Brush
4 Flat Washer, 1/4
2 Screw, 1/4-20 x 3/4” Flange Head
2 Nut, 1/4-20 Nylock Hex
2 Nut, M10-1.5 Nylock Hex
Serial Numbers/Notes
72” Rear Discharge Decks Only
60” Rear Discharge Decks
72” Rear Discharge Decks
60” Rear Discharge Decks
72” Rear Discharge Decks
60” Rear Discharge Decks
72” Rear Discharge Decks
72” Rear Discharge Decks Only
72” Rear Discharge Decks Only
72” Rear Discharge Decks Only
72” Rear Discharge Decks Only
72” Rear Discharge Decks Only
60” Rear Discharge Decks Only
> Change from previous revision
103
TURFCAT T628D
Serial No. 956314 - All
Serial No. 957233 - All
39.1 Caster Wheels and Rollers
Side Discharge Decks
9
5
7
4
10
5
6
9
11
6
10
4
7
8
9
5
2 3
6 7
10
7
9
11
6
11
1
4
5
10
7
8
5
6
6
2
Item
1
2
3
4
5
6
7
8
9
10
11
Part No.
Qty.
2721668
2
400330
446148
46335
64139-08
2198153
64141-6
2196190
142088.7
361619
64237-03
8
8
4
6
10
6
2
4
8
8
3
7
4
5
1
Description
Caster Wheel Assemblies
Serial Numbers/Notes
See 41.1
Screw, 7/16-14 x 3/4” Hex Head
Lockwasher, 7/16
Shaft, Roller
Screw, 5/16-18 x 3/4” Flange Head
Roller, 3” Anti Scalp
Nut, 5/16-18 Whiz Lock Flange
Shaft, Roller
Bracket, Roller
Screw, M10-1.5 x 30 mm Hex Head
Nut, M10-1.5 Nylock Hex
> Change from previous revision
104
TURFCAT T628D
Serial No. 956023 - All
Serial No. 957234 - All
40.1 Caster Wheels and Rollers
Rear Discharge Decks
5
4
7
5
6
4
6
7
4
9
5
2 3
67
9
10
6
7
11
1
4
5
10
7
5
8
6
5
6
3
7
4
1
2
Item
1
2
3
4
5
6
6
7
8
8
9
10
11
Part No.
Qty.
Description
2721668
2
Caster Wheel Assemblies
400330
446148
46335
64139-08
2198153
2198153
64141-6
146067
2196190
142088.7
361619
64237-03
8
8
5
6
7
8
6
1
1
4
8
8
Screw, 7/16-14 x 3/4” Hex Head
Lockwasher, 7/16
Shaft, Roller
Screw, 5/16-18 x 3/4” Flange Head
Roller, 3” Anti Scalp
Roller, 3” Anti Scalp
Nut, 5/16-18 Whiz Lock Flange
Shaft, Roller
Shaft, Roller
Bracket, Roller
Screw, M10-1.5 x 30 mm Hex Head
Nut, M10-1.5 Nylock Hex
Serial Numbers/Notes
See 41.1
60” Rear Discharge Decks
72” Rear Discharge Decks
60” Rear Discharge Decks
72” Rear Discharge Decks
> Change from previous revision
105
TURFCAT T628D
Serial No. 956023 - All
Serial No. 956314 - All
Serial No. 957233 - All
Serial No. 957234 - All
41.1 Caster Wheel
Part Number 2721668
14
13
12
2
1
3
2
12
11
4
8
9
5
9
7
6
11
15
Item
Part No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Qty.
Description
2722321
1
Support
48053-01
471214
2196167.7
4112921
64123-212
4250770
4250772
4250771
272228.03
360111
2722231
64163-22
455004
3001978
2722230-01
2
1
1
1
1
1
1
1
2
1
2
3
1
1
1
• Bearing, Flanged
• Grease Fitting, Straight
Caster Yoke
Nut, 5/8-11 Nylock
Screw, 5/8-11 x 6” Hex
Wheel and Tire Assembly
• Tire, 11 x 4.0-5
• Rim with Bearing
• • Bearing with Snap Ring
• Valve, Inflation (Not Shown)
Spacer, End
HOC Spacer, 1/2”
HOC Spacer, 1/4
Quick Pin
• Spanner, Wheel
Serial Numbers/Notes
> Change from previous revision
106
TURFCAT T628D
Serial No. All
42.1 Traction Pump
Part Number 4215101
2
4
3
1
5
Item
●
●
Part No.
1
2
3
4
5
Qty.
Description
Serial Numbers/Notes
N/S
1
Main Case and Input Shaft
See 43.1
N/S
N/S
N/S
N/S
1
1
4
2
Valve Plate and Charge Pump
Gasket, Valve Plate
Screw, 3/8-16 x 3-1/2” Socket Head
Pin, Alignment
See 44.1
Included in Seal Kit 4119859
> Change from previous revision
107
TURFCAT T628D
Serial No. All
43.1 Main Case and Input Shaft
Part Number 4215101 (Continued)
1
4
6
16
2
3
5
15
14
25
12
13
26 7
11
10
8
7
24
20
23
21
19
19
22
17
18
108
9
TURFCAT T628D
Item
●
Part No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
●
●
●
●
●
17
18
19
20
21
22
23
24
25
26
Qty.
Description
2721557
1
Shaft and Bearing Assembly
N/S
N/S
N/S
N/S
N/S
N/S
4119336
N/S
4119331
4119335
N/S
N/S
N/S
4119334
N/S
N/S
N/S
N/S
N/S
N/S
N/S
N/S
N/S
N/S
N/S
N/S
N/S
N/S
2721564
N/S
1
1
1
1
1
1
1
2
1
1
1
1
1
1
1
7
1
1
1
1
4
1
2
1
1
1
1
1
1
1
• Driveshaft with SAE Spline
• Bearing, Front Driveshaft
• Ring, Retaining
• Retainer, Seal
• Ring, Bearing Retaining
Seal, Shaft
Kit, Saddle Bearing
• Bearing, Saddle
Swashblock
Rotating Group Bearing Assembly
• Bearing, Cylinder Hydrodynamic
• • Pin, Roll
• Ring, Retainer
Rotating Group
• Retainer, Shoe
• Assembly, Piston and Shoe
• Ball, Fulcrum
• Spring, Shoe Retainer
• Barrel, Cylinder
Control Housing Assembly
• Screw, 1/4-20 x 1” Socket Head
• O-Ring
• O-Ring
• O-Ring, Control Housing
• Assembly, Arm and Pintle
• Housing, Control
• Pin, Control
Main Case
• Plug, Access
• O-Ring
Serial Numbers/Notes
Included in Seal Kit 4149859
> Change from previous revision
109
TURFCAT T628D
Serial No. All
44.1 Valve Plate and Charge Pump
Part Number 4197203 (Continued)
25
19
27
22
26
21
22
29
2
20
19
3
28
4
14
7
17
5
15
6
7
1
4
8
3
2
9
10
12
11
13
110
23
24
16
18
TURFCAT T628D
Item
●
●
●
●
●
Part No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
●
●
●
●
●
18
19
20
21
22
23
24
25
26
27
28
29
Qty.
Description
2721560
1
Front Valve Plate Assembly
N/S
N/S
N/S
4230540
N/S
N/S
N/S
5003497
N/S
N/S
N/S
N/S
N/S
N/S
4215102
N/S
N/S
N/S
N/S
4229540
N/S
N/S
N/S
N/S
N/S
N/S
4230560
N/S
4238983
N/S
N/S
N/S
N/S
1
2
2
2
1
1
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
1
2
2
1
1
1
1
1
1
1
2
• Valve Plate
• Cap, Relief Valve
• O-Ring
• Relief Valve, 3625 psi
• Plug, #3
• O-Ring
• Pin, Locating
• Tow Valve Assembly
• • Stem, Tow Valve
• • O-Ring
• • Backup Ring
• • Bonnet, Tow Valve
• • O-Ring
• • Nut, 3/8-24 Hex Jam
Gerotor and Coupling
• Coupling, Gerotor
• Ring, Retaining
• Assembly, Gerotor Pump
• Key, Gerotor Pump
Rear Valve Plate Assembly
• Cap, Relief Valve
• O-Ring
• Bushing, Coupling
• Plug, #3
• O-Ring
• Rear Plate
• Relief Valve, 915 psi Implement
• Cap, Charge Relief
• Charge Relief Valve Kit
• • Poppet, BPRV
• • Spring, 60 psi Relief
• O-Ring
• O-Ring
Serial Numbers/Notes
Included in Seal Kit 4149859
> Change from previous revision
111
TURFCAT T628D
Serial No. All
45.1 Deck Valve
Part Number 4135584
5
1
2
6
3/4
7
7
7
7
8
7
Item
Part No.
1
2
3
4
5
6
7
8
Qty.
7
Description
178102-79
1
Refief Valve, 3200 psi
178102-83
178102-13
178102-83
2721055-01
178102-83
178102-14
178102-81
178102-83
4134530
178102-61
178102-84
178102-60
178102-85
1
1
1
1
1
1
1
1
1
7
1
1
1
• Seal Kit
Relief Valve, 300 psi
• Seal Kit
Check Valve
• Seal Kit
Pilot Piston
Solenoid Valve
• Seal Kit
Coil
Plug, -6
• Seal Kit
Plug, -4
• Seal Kit
Serial Numbers/Notes
REFERENCE K6, See 47.1
> Change from previous revision
112
TURFCAT T628D
Serial No. All
46.1 Rear Wheel Motors
Part Numbers 2721416-01 and 4114190-01
6
5
10
4
3
4
9
8
1
7
9
Item
Part No.
1
2
3
4
5
6
7
8
9
10
2
Qty.
Description
2721416-01
1
Wheel Motor, Left Rear
64162-08
148138
2721430
2721430-01
2721430-02
2721430-03
2721430-04
4114190-01
64162-08
148138
4114189
2721430-01
2721430-02
2721430-03
2721430-04
1
1
1
1
1
4
1
• Key, 5/16 x 1” Woodruff
• Seal Kit
• Cartridge
• • Check Valve
• • • Seal Kit
• • Bolt
• • Plug
Wheel Motor, Right Rear
• Key, 5/16 x 1” Woodruff
• Seal Kit
• Cartridge
• • Check Valve
• • • Seal Kit
• • Bolt
• • Plug
1
1
1
1
1
4
1
Serial Numbers/Notes
> Change from previous revision
113
TURFCAT T628D
Serial No. All
47.1 Electrical Schematic
SW9
Og
Rd
Bk
K8
Og
Bk
SW6
Og/Ye
U2
Light
Connector
Bk
-
Og/Ye
+
Bk
-
Og
+
U6
SW8
U3
Og/Ye
Og
Og
Bk
I
G
S
SW5
Bk/Wh
Bk
Og/Ye
LBu
U4
R3
Og
Bk
I
G
SW3
S
Og
Gy
Gn/Wh
R2
Gn/Wh
NO
NO
LBu
NC
NC
Ye
SW11
Pu
L2
Og
L1
Og
SW7
Pk
Og
CC
NCC
NOC
CB
NCB
NOB
CA
NCA
NOA
SW10
Ye
Gn/Bk
DBu
SW4
Rd
B
Og
OFF-NONE
I Bk/Og
RUN-B+I
Rd/Ye
S
SW1
GP-B+I+GP
Wh
GP
START-B+I+GP+S
F1
K5
DBu
87
Og/Ye 86
Wh
DBu/Wh
Og/Ye
87A
30
DBu/Wh
K6
85 Bk
R1
U1
Gn
Gn
CB1
B
I
L
Og
Og
Og/Gn
SW2
Gn/Rd
K1
87A
Rd/Ye 87
Bk 86
Bn
87
Bk 86
30
Rd/Wh
85
Gn/Wh
Gn/Wh 85
30
Og
Og
Og
30
85
Rd/Wh
Og
85
Bn
Wh/Og P
Wh/Og
M1
114
K7
30 Bk
Gn/Rd 87
86 Bk
K3
B S
B1
D
K2
87A
K4
87A
Rd
C
Bk
Pk
H Gn
87A
87
Bk
Gn
86 Bn/Wh
E
U5
B
TURFCAT T628D
Item
B1
CB1
F1
K1
K2
K3
K4
K5
K6
K7
K8
L1
L2
M1
R1
R2
R3
SW1
SW2
SW3
SW4
SW5
SW6
SW7
SW8
SW9
SW10
SW11
U1
U2
U3
U4
U5
U6
Reference
Illustration
See 14.1
See 14.1
See 14.1
See 14.1
See 14.1
See 14.1
See 14.1
See 45.1
Not Shown
Not Shown
See 6.1
See 6.1
Not Shown
Not Shown
See 17.1
See 19.1
See 6.1
See 5.1
See 7.1
See 6.1
See 8.1
See 17.1
Not Shown
See 6.1
Not Shown
See 3.1
See 8.1
Not Shown
See 14.1
See 6.1
See 6.1
See 14.1
See 14.1
Part
Number
N/S
48524
148082-20
2722325
2722325
2722325
2722325
2722325
4134530
2811021
148387
178092-22
178092-22
557888
4177227
148270
2208073
2810269
4139450
108208
4174684
38382
2722389
554018
148061
2208099
38383
38382
2810354
48030N
148032
148269
2188154
886425
Description
Battery
40A Circuit Breaker
20A Fuse
Interlock Relay
Seat Delay Module Relay
Fuel Relay
Starter Relay
PTO Disable Relay
Deck Valve Solenoid Coil
Fuel Solenoid
Flow Divider Solenoid
Alternator Light
Engine Oil Pressure Light
Starter Motor
Glow Plugs
Temperature Sender
Fuel Sender
Ignition Switch
Seat Switch
Neutral Switch
PTO Switch
Parking Brake Switch
Temperature Switch
Engine Oil Pressure Switch
Horn Button
Differential Lock Switch
PTO Enable Switch
Parking Brake Interlock Switch
Alternator
Hour Meter
Fuel Gauge
Temperature Gauge
Seat Delay Module
Horn
Serial Numbers/Notes
Obtain Battery Locally
Part of Deck Valve 4135584
Part of Engine
Optional 2WD Differential Lock
Part of Engine
Part of Engine
Part of Engine
Part of Engine
Optional Kit
Optional 2WD Differential Lock
Part of Engine
> Change from previous revision
115
TURFCAT T628D
Serial No. 69168 - All
48.1 2WD Hydraulic Schematic
Lift
Cylinder
Steering
Cylinder
.070
RT
LT
A
B
6.6 ci
In
Steering
Valve
In
Aux Out
Out
Lift
Valve
1.27 ci
M1
M2
Flow Divider Valve
G
300
psi
G
11.9 ci
C
3200 psi
P
C
Deck
Valve
11.9 ci
RF
LF
Wheel Wheel
Motor Motor
T
2WD Units with optional
Differential Lock Kit
OUT
915 psi
1.35 ci
B
3625 psi
3100
RPM
1.01 ci
.425 ci
3625 psi
102 psi
IN
Oil
Filter
10
Micron
116
LF
Wheel
Motor
Gear
Pump
11.9 ci
A
Case Drain
2WD Units
Oil
Cooler
RF
Wheel
Motor
11.9 ci
TURFCAT T628D
Serial No. 69169 - All
49.1 4WD Hydraulic Schematic
Steering
Cylinder
Lift
Cylinder
.070
RT
LT
A
B
6.6 ci
In
Steering
Valve
In
Aux Out
Out
Lift
Valve
1.27 ci
M1
M2
G
300
psi
G
C
3200 psi
P
T
C
Deck
Valve
RF
Wheel
Motor
OUT
915 psi
1.35 ci
1.01 ci
.425 ci
3625 psi
102 psi
IN
11.9 ci
8.6 ci
8.6 ci
Gear
Pump
RR
Wheel
Motor
A
LR
Wheel
Motor
Case Drain
T
Oil
Filter
LF
Wheel
Motor
B
3625 psi
3100
RPM
11.9 ci
Oil
Cooler
P
Hot Oil
PLT Shuttle
10
Micron
117
INDEX
00253.....................92, 93
00459...... 29, 73, 75, 101
00460...... 29, 73, 75, 101
1003399.......................47
1003400.......................47
108003...................55, 57
108031.........................71
108086-05 ...................69
108091-11 ...................87
108138-02 ...................89
108194-06 .............35, 61
108194-09 ...................59
108194-11 ...................61
108194-13 ...................61
108208.........................43
112111-04 ...................99
112111-05 ...................99
112243-03 ...................99
112243-04 ...................99
112378.7....................103
118047-04 ...................47
118047-06 ...................31
118107.......................103
123032.........................43
128079.........................43
128089-02 ...................43
128169.........................99
142088.7............104, 105
142143.7................73, 75
142350-01 ...................61
142350-02 ...................61
143011.........................45
146067.......................105
146127.7....................102
148027.........................67
148032.........................41
148034-06 .............73, 75
148057-01 .............37, 39
148058-01 .............55, 57
148058-02 .............55, 57
148081.........................69
148082-20 ...................59
148085.........................49
148086.........................49
148090-03 ...................89
148132.........................73
148132-01 ...................73
148138.................47, 113
148269.........................41
148270.........................65
158058-01 ...................77
158058-08 ...................77
158058-12 ...................77
158058-15 ...................77
158061-01 .............83, 85
158061-24 ...................65
118
158122-01....................67
158136.................. 37, 39
172084.........................65
172257.7....................102
173042.................. 55, 57
176098.7....................102
178025.................... 2, 77
178092-13....................41
178092-22....................41
178102-13..................112
178102-14..................112
178102-60..................112
178102-61..................112
178102-79..................112
178102-81..................112
178102-83..................112
178102-84..................112
178102-85..................112
178111.................. 94, 95
178112-09....................87
188015.........................41
192086.7......................71
192087.7......................71
192091.7......................71
192107.7......................99
192187.7......................35
193003.........................71
196004.........................71
198002-01....................71
198003-01....................71
198027.........................99
198037.........................99
198069-02....................35
2000591.......... 29, 37, 39
2000638................ 92, 93
2000641................ 29, 31
2000647................ 29, 49
2000650.......... 29, 37, 39
2000652................ 29, 31
2000653.......... 29, 37, 39
2000655... 29, 37, 39, 92,
93
2000688.......... 29, 37, 39
2000739................ 29, 61
2000740.......... 29, 37, 39
2000741.......... 29, 37, 39
2000742................ 29, 31
2000743................ 29, 49
2000744................ 29, 71
2000745................ 29, 33
2000746................ 92, 93
2000764................ 92, 93
2000767.......... 29, 37, 39
2182427.7....................33
2188154.......................59
2188178.......................41
2192220.6 ................... 33
2192229.7 ................. 103
2192230.7 ................. 103
2192231.7 ................. 103
2192239.7 ................. 101
2192248.7 ................... 31
2192254.7 ............. 37, 39
2192267.7 ................... 97
2192289.7 ................... 71
2192291.7 ................... 71
2192304.7 ................... 49
2192305.7 ................. 101
2192308.7 ................... 45
2192310.7 ................... 45
2192317.7 ................. 101
2192318.7 ................... 95
2192319.7 ................... 95
2192334.7 ................... 95
2192335.7 ................... 95
2192351.7 ................... 45
2192361.7 ................... 45
2192383.7 ................... 73
2192390.7 ................. 101
2192441.7 ................... 61
2192444.7 ................... 43
2192472.7 ................... 33
2192477.7 ................... 67
2192478.7 ................... 67
2192479.7 ................... 67
2192480.7 ................... 67
2192505.7 ................... 65
2192518.7 ................... 77
2192565.7 ................... 97
2192571.7 ................... 31
2192576.7 ................... 97
2192579.7 ................. 101
2192586.7 ................... 49
2192649.7 ................... 33
2192650.7 ................. 101
2192651.7 ................. 101
2192669.6 ................... 33
2192672.7 ................... 94
2192673.7 ................... 94
2192713.7 ................... 97
2192714.7 ................... 97
2192715.7 ................... 97
2192716.7 ................... 97
2192719.7 ................... 94
2192720.7 ................... 94
2192721.7 ................. 101
2192722.7 ................. 101
2192724.7 ................... 97
2192725.7 ................... 97
2192726.7 ................... 97
2192727.7 ................... 97
2192762.7 ................... 91
2192763.7 ................... 91
2192769.7 ................. 101
2192770.7 ................. 101
2192774.7 ................... 97
2192777.7 ................... 91
2193027 ...................... 71
2193028 ...................... 71
2193045.7 ............. 55, 57
2193046 ...................... 43
2196093.7 ................... 71
2196104 ...................... 33
2196132.6 ................... 49
2196133.7 ................... 43
2196138.7 ................... 71
2196145.6 ............. 55, 57
2196167.7 ................. 106
2196176.7 ................... 97
2196177.7 ................... 97
2196178.7 ................... 97
2196180.7 ................... 97
2196190 ............ 104, 105
2196212.7 ................. 101
2198088 ...................... 41
2198089 ...................... 41
2198091 ................ 59, 69
2198094 ...................... 71
2198109 ................ 37, 39
2198121 ...................... 99
2198125 ...................... 59
2198126 ..........71, 73, 75
2198127 ...................... 71
2198129 ...................... 45
2198130 ...................... 73
2198132 ...................... 63
2198134 ................ 73, 75
2198136 ...................... 31
2198137 ...................... 31
2198141 ...................... 63
2198147 ...................... 59
2198147-01 ............. 2, 59
2198147-02 ................. 59
2198147-03 ................. 59
2198147-04 ................. 59
2198153 ............ 104, 105
2198159 ................ 67, 69
2198162 ...................... 91
2198175 ...................... 61
2198187 ...................... 65
2198188 ...................... 67
2198202 ...................... 77
2198218 ................ 83, 85
2198228 .................... 101
2198229 .................... 101
2198248 ...................... 67
2198254 ...................... 77
2198255 ...................... 87
INDEX
2198257...................... 77
2198279...................... 43
2198294...................... 77
2198295...................... 77
2198297...................... 59
2202061.6................... 35
2202118.7................... 33
2203049................ 55, 57
2206030.7................... 49
2208048...................... 65
2208048-01................. 65
2208048-02................. 65
2208058.7................... 33
2208073...................... 69
2208075................ 37, 39
2218152-04......... 87, 101
2218152-05......... 87, 101
22372.............. 37, 39, 65
23009A ....................... 91
2306144................ 37, 39
2308095...................... 63
2690016-01................. 87
2690017-02................. 67
2690017-03................. 67
2690025...................... 67
2690032-01................. 77
2692215-22........... 83, 85
2692215-28................. 81
2692215-29................. 81
2692217-16..... 79, 81, 87
2692219-03........... 83, 85
2692222-06................. 81
2692222-07................. 81
2692222-08................. 81
2692223-06........... 78, 81
2692223-09........... 78, 81
2692231-02................. 83
2692232-05................. 77
2692238-05................. 87
2692238-06................. 87
2692244-01................. 87
2692245-01................. 83
2692247-01................. 83
2692250-01................. 79
2692269-01................. 83
2692269-02................. 83
2692286-02................. 87
2692292-01................. 77
2692295-02................. 87
2692295-03................. 87
2692295-04................. 87
2692299-01................. 81
2702707...................... 65
2720273.7................... 99
2720828.7................... 57
2720948...................... 99
2721055-01 ............... 112
2721146.7 ................... 57
2721183 ................ 55, 57
2721185.7 ................... 55
2721223 ................ 55, 57
2721275 ...................... 47
2721320-01 ................. 47
2721334 ...................... 65
2721416-01 ......... 57, 113
2721430 .................... 113
2721430-01 ............... 113
2721430-02 ............... 113
2721430-03 ............... 113
2721430-04 ............... 113
2721459.7 ............. 63, 81
2721460.7 ............. 63, 81
2721511 ...................... 35
2721519 ...................... 35
2721524.7 ................... 59
2721526 ...................... 35
2721527 ................ 37, 39
2721534-01 ................. 47
2721539 ...................... 59
2721539-01 ................. 59
2721539-02 ................. 59
2721539-03 ................. 59
2721549 ...................... 63
2721564 .................... 109
2721631 ...................... 41
2721668 ............ 104, 105
2721672 ...................... 47
2721676.7 ................... 47
2721813 ...................... 47
2721829.7 ................... 59
2721852.7 ................... 47
2721872 ...................... 49
2721873 ...................... 49
2721874 ...................... 49
2721878 ...................... 41
2721881 ................ 37, 39
2721907 ...................... 45
2721960 ...................... 97
2721961 ...................... 97
2721962 ...................... 97
2721963 ...................... 97
2721964 ................ 94, 95
2721966 ................ 94, 95
2721969 ...................... 31
2721970 ...................... 31
2721979 ...................... 31
2722063 ................ 29, 31
2722072.7 ................... 57
2722073.7 ................... 57
2722141.7 ................... 89
2722201.7 ................... 45
2722219.7 ................... 59
2722230-01 ............... 106
2722231 .................... 106
272228.03 ................. 106
2722287-02 ................. 63
2722321 .................... 106
2722325 ...................... 59
2722335 ...................... 47
2722389 ...................... 65
2810269 ...................... 41
2810354 .................... 115
2811020 ...................... 41
2811021 .................... 115
2811547 ...................... 75
3000351 ...................... 63
3000352 ................ 97, 99
3001328 ................ 37, 39
3001978 .................... 106
3002098 ...................... 35
3003704 ...................... 69
3003926 .............. 97, 101
3004526 ...................... 63
3007796 ...................... 47
303916 ........................ 69
306799 ........................ 35
310711 ........................ 91
32418-04 ............... 94, 95
326112 ........................ 89
326799 ......35, 77, 87, 89
328016 ........................ 71
33049-05 ..................... 99
33179-02 ..................... 99
339896 ........................ 87
339897 67, 79, 81, 83, 85
339898 77, 78, 81, 83, 85
339899 ............78, 81, 87
339900 ........................ 77
339902 ........................ 67
339903 ........................ 77
339909 79, 81, 83, 85, 87
339910 ......78, 81, 83, 85
339911 ........................ 87
339912 ........................ 87
339923 ........................ 87
339941 .................. 79, 81
339962 ........................ 81
339977 ........................ 87
339979 ............81, 83, 85
339980 .................. 83, 85
339984 ......78, 81, 83, 85
339989 ........................ 87
339993 ........................ 87
340026 .................. 83, 85
340059 ........................ 87
340061 ............81, 83, 85
340062 .................. 83, 85
340067 .................. 78, 81
340070 ........................87
340073 ........................87
340096 ........................81
340120 ..................78, 81
340144 ........................81
340168 ........................81
340263 ........................79
340264 ..... 78, 81, 83, 85
35027N ........... 55, 57, 99
353914 ........................49
354774 ................99, 101
354807 ........................49
355177 ..................73, 75
360111 ......................106
361001 ........................59
361005 ........... 31, 59, 65
361117 ..................67, 69
361500 ..................55, 63
361619 33, 99, 103, 104,
105
361648 ........... 49, 55, 57
361898 ..................35, 61
362263 ........................65
363386 ........................49
363485 ........................67
363586 ..................35, 59
365409 ........................99
366653 ........................91
366883 ........................31
367314 ........................39
367458 ..................77, 87
38061A ..................37, 39
38080-01 .....................47
38315 ..........................99
38382 ..........................45
38383 ..........................33
38471-06 .....................61
38542 ....................37, 39
3970219 ......................63
400108 ..................37, 39
400112 ........... 31, 43, 71
400120 ........................89
400182 ........................47
400188 ......................102
400190 ........... 73, 75, 91
400196 ........................71
400202 ........................75
400218 ........................65
400250 ........................43
400262 ......... 33, 91, 101
400264 ........................71
400266 ..................65, 91
400270 ........................71
400274 ........................43
400330 ..............104, 105
400336 ..................51, 53
119
INDEX
400408.........................65
400416............ 55, 57, 99
400442.........................99
400446.........................47
400626...................51, 53
402058.........................31
402118.........................43
402122...................33, 45
402146.........................69
403752.........................47
403753...................33, 43
407587...................37, 65
409812...................39, 49
409908.........................37
409953.........................33
4112921.....................106
4113022.......................69
4113467.......................49
4113994.7....................65
4114131.................73, 75
4114131-1 .............73, 75
4114131-2 .............73, 75
4114131-3 .............73, 75
4114180-01 .................57
4114189.....................113
4114190-01 ...............113
4114249.......................43
4114282.......................43
4114284.......................43
4117468.................29, 49
4117819.......................43
4117962.................29, 65
4118238.................55, 57
4118238-01 ...........55, 57
4118636.......................71
4118636-01 .................71
4118925.......................43
4118926.......................43
4119331.....................109
4119334.....................109
4119335.....................109
4119336.....................109
4119859.....................107
4124792.................92, 93
4125286.................29, 31
4125492.......................63
4126532.................29, 31
4127564.................29, 73
4131974.......................99
4131975.......................99
4131977.......................99
4134530.....................112
4135584.................73, 75
4137628.................92, 93
4139436.......................39
4139450.......................39
120
4139453.......................39
4140094................ 51, 53
4149859............ 109, 111
4155480.......................35
4164240................ 51, 53
4164381................ 92, 93
4174684.......................41
4177227.....................115
4179663................ 29, 31
4179664................ 29, 33
4179802.......................69
4181862.......................29
4181865................ 29, 49
4182780.......................37
4182840.......................65
4185120.......................61
4186280.......................61
4188580.......................61
4188581.......................61
4191260.......................97
4192161.......................97
4192441.......................65
4192660.......................63
4194329................ 29, 49
4195480.6....................61
4195820.......................59
4197523.......................37
4197940.......................75
4199140.......................29
4199840.......................87
4200000.......................71
4200001.......................71
4201840.......................75
4204080.......................63
4204081.......................63
4204100.......................63
4204101.......................63
4204642.....................101
4210500.......................37
4210685.......................37
4211400.......................75
4215101.......................65
4215102.....................111
4224460.......................75
4228940.......................87
4228960.......................69
4229540.....................111
4230540.....................111
4230560.....................111
4236020.......................49
4238983.....................111
4239123.......... 29, 37, 39
4240902.......................71
4240903.......................71
4242522.......................49
4242523.......................49
4242525 ...................... 49
4242526 ...................... 49
4242527 ...................... 49
4242528 ...................... 49
4248151 ...................... 75
4248190 ...................... 75
4249470 ...................... 75
4249471 ...................... 85
4249472 ...................... 85
4249473 ...................... 85
4249474 ...................... 85
4249475 ...................... 85
4249870 ...................... 49
4250770 .................... 106
4250771 .................... 106
4250772 .................... 106
4250870 ...................... 71
4250871 ...................... 71
4254670 ...................... 53
43067A........................ 43
434070 ........................ 37
434071 ........................ 33
441693 ........................ 49
443106 .................. 37, 39
443108 ........................ 43
443112 ........................ 47
443114 .................. 51, 53
443128 ......55, 57, 91, 99
443810 ........................ 71
443828 ........................ 75
444306 ........................ 31
44431033, 37, 39, 43, 45,
....................... 65
444708 ........................ 71
444718 ............ 71, 73, 75
444752 .................. 51, 53
444754 ........................ 43
444758 ........................ 49
444762 ............ 37, 39, 71
444851 ........................ 31
445057 ............ 55, 57, 99
445660 .................. 55, 57
445664 .................. 55, 57
445770 ........................ 89
445781 ........................ 71
445783 ........................ 43
44578431, 33, 35, 43, 45,
....................... 73
445795 .................. 37, 39
445805 ...................... 103
445806 ...................... 101
445816 ....33, 91, 97, 102
445820 ........................ 49
445851 ........................ 37
446130 ............ 43, 59, 71
446134 .................. 37, 39
44613631, 47, 63, 65, 77,
....................... 89
446142 .................. 33, 65
446148 ..51, 53, 104, 105
446154 .................. 57, 99
446166 ........................ 91
450005 ............71, 73, 75
450015 .................. 43, 89
450016 ........................ 59
450017 .................. 65, 69
450029 ........................ 49
450048 ........................ 49
450056 ........................ 57
450149 ........................ 59
450168 ........................ 75
450170 ........................ 45
450190 .................. 37, 63
450191 ........................ 33
450192 ............33, 43, 77
450213 .................. 57, 67
450214 ........................ 67
450215 .................. 47, 49
450217 ........................ 63
450326 ........................ 57
450359 ........................ 49
450367 .................. 49, 61
450376 ........................ 59
450377 ............45, 73, 75
45037831, 33, 43, 59, 65,
................. 69, 89
450379 ......33, 47, 49, 67
450380 ........................ 49
450389 ........................ 75
450398 ........................ 59
45040031, 33, 43, 59, 73,
....................... 75
450401 ........................ 67
450410 ........................ 75
450411 .................. 37, 75
452004 ............65, 73, 89
452006 .................. 37, 39
452008 .....33, 47, 97, 99,
101, ............. 103
452010 .................. 49, 65
452012 .................. 55, 57
452380 ........................ 63
452390 ........................ 89
453011 ....33, 47, 71, 101
453020 ............51, 53, 99
453022 ........................ 55
453023 ...................... 103
454033 ........................ 37
455004 ...................... 106
455013 ........................ 37
457023 ........................ 31
458040 ........................ 99
INDEX
458115........................ 99
460028.................. 55, 57
460032........................ 55
460336.................. 31, 47
461355........................ 71
461359........................ 45
461377........................ 71
461385........................ 43
461393........................ 73
461465........................ 47
46335................ 104, 105
463603........................ 31
463604........................ 31
471213.................. 55, 57
471214.... 55, 57, 97, 106
471216........................ 99
48013-06A .................. 43
48030N ....................... 59
48053-01................... 106
482228A ............... 37, 39
48228-06..................... 59
48228-07............... 35, 45
48228-10..................... 59
48228-1A ........ 37, 39, 61
48428.......................... 43
48429.......................... 43
48476-A1 .................... 55
48479.......................... 55
48480.......................... 55
48517.......................... 41
48517-01..................... 33
48517-02..................... 41
48517-05..................... 35
48524.......................... 59
5001182.................. 2, 69
5001284...................... 65
5003192...................... 47
5003193...................... 47
5003497.................... 111
500596........................ 55
523126........................ 91
523356.................. 37, 39
523357.................. 37, 39
548045.................. 35, 45
548481........................ 71
548604............ 45, 71, 77
553020........................ 65
554748........................ 69
554752........................ 69
555867........................ 61
557888...................... 115
62464-7A .................... 99
64018-20..................... 31
64025-35............... 47, 57
64123-105................... 89
64123-114................. 103
64123-133 ................... 91
64123-212 ................. 106
64139-08... 102, 104, 105
64139-14............... 91, 97
64139-20..................... 61
64141-4 ....................... 91
64141-691, 102, 104, 105
64151-8 ....................... 39
64152-49..................... 39
64162-08............. 57, 113
64163-12..................... 99
64163-22................... 106
64163-29..................... 65
64164-08..................... 47
64166-17..................... 39
64197-002 ................... 39
64197-005 ................... 99
64206-08..................... 63
64209-01..................... 39
64209-03..................... 99
64215-05......... 31, 94, 95
64215-07............... 94, 95
64229-05..................... 99
64237-03......63, 97, 101,
103, ..... 104, 105
64237-05..................... 61
64246-01..................... 61
64246-03............. 99, 101
64251-003 ................... 61
64251-004 ............. 49, 63
65103A........................ 99
65362-04..................... 89
66170 .......................... 39
68156A........................ 71
69051-05..................... 69
69068-06............... 83, 85
69206-05............... 83, 85
69213-03..................... 81
73017A........................ 71
800488 55, 57, 63, 65, 99
800490 .................. 55, 57
800531 ........................ 47
800602 .................. 55, 57
800743 ........................ 55
806953 ........................ 33
809152 ............ 59, 73, 75
809174 .................. 55, 57
810149 .................. 45, 99
825624 ........................ 69
830930 ......77, 79, 81, 87
831586 ........................ 43
840476 ........................ 45
85006-1A .................... 99
88042-01..................... 69
886425 ........................ 59
970078 ........................ 51
121
World Class Quality, Performance and Support
Equipment from Jacobsen is built to exacting
standards ensured by ISO 9001 and ISO 14001
registration at all of our manufacturing locations.
A worldwide dealer network and factory trained
technicians backed by Genuine Parts
provide reliable, high-quality product support.
When Performance Matters.™
Jacobsen, A Textron Company
11108 Quality Drive, Charlotte,
NC 28273, USA
www.Jacobsen.com
Ransomes Jacobsen Limited
West Road, Ransomes Europark,
Ipswich, England, IP3 9TT
English Company Registration No. 1070731
www.ransomesjacobsen.com