advertisement
Bluetooth Keyboard
User’s Guide
Model Name: BTKYB-001
FCC ID: 2AAWXKB001
CAUTION:
To use this product properly, please read the user's guide before installation
Welcome
Congratulations on selecting Bluetooth Keyboard as your input device. The super thin (only 5.8mm thick) keyboard is lightweight and crafted with precision typing design. It is the ideal product for your tablet and other Bluetooth enabled device.
Overview
- Blue LED Blinking: Pairing
- Red LED on: Charging
- Green LED on: Full Charged
- Yellow LED on: Low in Battery
- White LED: Capslock Status
Installation Guide
Step 1. Charging the battery
When to charge
1 First-Time Use: Please charge at least 2 hours for the first time usage and charge at least 1 hours when battery runs low
2 When the yellow LED starts blinking, it means the battery is nearly empty
How to charge
Plug the USB cable into your keyboard and computer by USB port respectively and it starts charging.
Step 2. Pairing your Bluetooth Keyboard with your tablet
1 Turn on the keyboard and press the PAIR button on the keyboard, the LED light will blink blue.
Turn on your tablet, and tap“ Settings”
2 Select “Wireless and networks”, enable the Bluetooth function, and tap
“Bluetooth settings”
3 Your tablet will start to search Bluetooth keyboard , after finding
“ Bluetooth Keyboard ”, then you should tap “ Bluetooth Keyboard”, it will start connecting
4 You will now be prompted to enter a PIN number using your keyboard.
Enter the 4 digit PIN from your keyboard and press ENTER.
Product Specifications
Bluetooth Specification: Version 2.0
Range of Frequency: 2.4GHz Spectrum
Operating Voltage: 3.7Vdc ( powered by Li-ion )
Operation Current: < 3mA
Standby Current: 0.5 mA
Sleep Current: < 0.2 mA
Transmit Range: up to 10 meters
Storage Temperature: -40 ~ +125 degree
What's in the box?
Cover with Bluetooth wireless keyboard and stand
USB to micro USB charging cable
User documentation
Important Regulatory Information
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement