advertisement
![Netgear Répéteur WiFi User Manual | Manualzz Netgear Répéteur WiFi User Manual | Manualzz](http://s2.manualzz.com/store/data/063250138_1-a8cd6676b7f3fda0004d8b4f32b9d885-360x466.png)
AC750 WiF Range Extender
Model E X3700
User Manual
June 2018
202-11487-02
350 East Plumeria Drive
San Jose, CA 95134
USA
Support
Thank you for purchasing this NETGEAR product. You can visit www.netgear.com/support to register your product, get help, access the latest downloads and user manuals, and join our community. We recommend that you use only official NETGEAR support resources.
Conformity
For the current EU Declaration of Conformity, visit http://kb.netgear.com/app/answers/detail/a_id/11621.
Compliance
For regulatory compliance information, visit http://www.netgear.com/about/regulatory .
See the regulatory compliance document before connecting the power supply.
Trademarks
© NETGEAR, Inc., NETGEAR and the NETGEAR Logo are trademarks of NETGEAR, Inc. Any non-NETGEAR trademarks are used for reference purposes only.
2
Table of Contents
Chapter 3 Extender Network Settings
Boost Your Video Streaming with FastLane Technology . . . . . . . . . . . . . . . . . . . 20
Turn Off the SSID Broadcast to Create a Hidden Network . . . . . . . . . . . . . . . . . 22
Use WPS to Add a Computer to the Extender’s WiFi Network . . . . . . . . . . . . . . 25
Use WPS with the Push Button Method . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Use the Extender with MAC Filtering or Access Control . . . . . . . . . . . . . . . . . . . 31
Chapter 4 Maintain and Monitor the Extender
Change the Extender User Name and Password. . . . . . . . . . . . . . . . . . . . . . . . . . 33
Recover a Forgotten User Name or Password. . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
3
Back Up and Manage the Extender Configuration . . . . . . . . . . . . . . . . . . . . . . . . 36
Return the Extender to Its Factory Default Settings . . . . . . . . . . . . . . . . . . . . . . 37
Chapter 5 FAQs and Troubleshooting
Cannot Join a WiFi Network and Receive an Error Message . . . . . . . . . . . . . . . . 44
Appendix A Factory Settings and Technical Specifications
4
1.
Overview
1
The WiFi Range Extender boosts your existing network range and speed, delivering dual-band
WiFi. You can also use the extender in access point mode as a WiFi access point and create a new WiFi hotspot by using a wired Ethernet connection.
This chapter covers the following topics:
•
•
•
Note: For more information about the topics covered in this manual, visit the support website at support.netgear.com
.
Note: Firmware updates with new features and bug fixes are made available from time to time on downloadcenter.netgear.com
. Some products can regularly check the site and download new firmware, or you can check for and download new firmware manually.
5
Meet Your Extender
Before you install your extender, familiarize yourself with its LEDs, buttons, and port.
Front Panel
Router
Link LED
Device
Link LED
Power LED
WPS LED
Figure 1. Front panel LEDs
Side Panels
Power connector
(varies by region)
Power connector
(varies by region)
Factory
Reset
Button
WPS button
Power On/Off button
Figure 2. Side panel buttons and port
Overview
6
Ethernet port
The following table describes the LEDs.
Table 1. Front panel LEDs
LED
Router Link
Device Device Link
Power
WPS
Description
This LED indicates the connection between the extender and the router or access point:
• Solid green . Best connection.
• Solid amber . Good connection.
• Solid red . Poor connection.
• Off . No connection.
This LED indicates the connection between the extender and a computer or WiFi device:
• Solid green . Best connection.
• Solid amber . Good connection.
• Solid red . Poor connection.
• Off . No connection.
• Solid amber . The extender is booting.
• Solid gree n. The extender is powered on.
• Off . The extender is powered off.
• Solid green . WiFi security is enabled (WPA or WPA2).
• Blinking green . A WPS connection is in progress.
• Off . WiFi security is not enabled
When to Use Your Extender
NETGEAR recommends that you connect through the extender network only when the WiFi device is in a “dead zone” where connection from the existing network is poor or nonexistent.
Data traffic routed through the extender is inherently slower than traffic routed directly from the network.
How the Extender Works
The extender works like a bridge between a WiFi router (or a WiFi access point) and a WiFi device outside the range of the WiFi router. The extender performs two main jobs:
• The extender connects to a working WiFi network.
When the extender connects over WiFi to an existing network, it functions as a network client, similar to how a WiFi device connects to a network.
• The extender acts as an access point for WiFi devices.
The extender broadcasts its own WiFi network that WiFi devices can join. In its role as an access point, the extender performs tasks that WiFi routers do, such as broadcasting its network name (SSID).
Overview
7
The extender must do each of these jobs so that both ends of the bridge are in place.
WiFi Range Extender
Boosts the range of your existing WiFi and creates a stronger signal in hard-to-reach areas
Existing WiFi
Sometimes your router does not provide the WiFi coverage that you need
Figure 3. Range extender in a home
Overview
8
2.
Get Started
This chapter covers the following topics:
•
•
Use the Extender in Access Point Mode
•
Log In to the Extender After Installation
•
2
9
Install the WiFi Extender
Place the extender, apply power, and connect it to your WiFi network.
Note: You can also use the extender as a WiFi access point and create a new WiFi hotspot by using a wired Ethernet connection. See
Extender in Access Point Mode on page 14.
Place the Extender and Apply Power
To place the extender and apply power:
1. Place your extender in the same room as your WiFi router.
Proximity to the WiFi router is required only during the initial setup process.
2. Plug the extender into an electrical outlet.
3. Wait for the Power LED to light amber and then turn green.
If the Power LED does not light, press the Power On/Off button on the side of the extender.
Connect to an Existing WiFi Network
To extend the range of your WiFi network, you must connect the extender to your existing
WiFi network. You can do this in one of two ways:
• Connect with WPS . For more information, see
• Connect with web browser setup . For more information, see
Connect with WPS
Wi-Fi Protected Setup (WPS) lets you join a secure WiFi network without typing the network name and password.
Note: WPS does not support WEP network security. If you are using WEP security, follow the instructions in
Connect with Web Browser Setup on page 11.
To use WPS to connect the extender to your WiFi router:
1. Press the WPS button on the side panel of the extender.
The WPS LED blinks.
Get Started
10
2. Within two minutes, press the WPS button on your router or access point.
The WPS LED on the extender lights solid green, the Router Link LED lights, and the extender connects to your existing WiFi network.
If the Router Link LED does not light, try again. If it still does not light, see Connect with
3. If your WiFi router supports the 5 GHz band, repeat Steps 1 and 2 to connect the extender to the 5 GHz band.
4. Find the new extender network name on your computer or WiFi device.
The extender creates two new extended WiFi networks. The extender’s new WiFi network names are based on your existing WiFi network name, with _EXT at the end of the name.
For example:
• Existing WiFi network name . MyNetworkName
• New extended network names . MyNetworkName_2GEXT and
MyNetworkName_5GEXT
5. Connect your computer or WiFi devices to the new extended WiFi network.
Use the same WiFi password that you use for your WiFi router.
6. Unplug the extender and move it to a new location closer to the area with a poor WiFi signal.
The location that you choose must be within the range of your existing WiFi router network.
7. Plug the extender into an electrical outlet.
8. Wait for the Power LED to light amber and then turn green.
If the Power LED does not light, press the Power On/Off button on the side of the extender.
9. Use the Router Link LED on the front panel to help you choose a spot where the extender-to-router connection is optimal.
Connect with Web Browser Setup
You can use a web browser to log in to the extender and set up its WiFi connection to your existing WiFi router.
To use a web browser to connect the extender to your WiFi router:
1. Use a WiFi network manager on a computer or WiFi device to find and connect to the extender WiFi network NETGEAR_EXT.
After the connection with the computer or WiFi device is established, the Device Link LED lights.
2. Launch web browser.
3. Enter www.mywifiext.net
in the address field of the browser.
Get Started
11
The New Extender Setup screen displays.
4. Click the NEW EXTENDER SETUP button.
The first time that you log in to the extender, the Create Account screen displays. If the
Create Account screen does not display, visit www.mywifiext.net
.
5. Complete the fields on the Create Account screen and click the NEXT button.
6. When prompted, select your country or region from the Regional Settings menu and click the NEXT button.
7. Click the WIFI RANGE EXTENDER button.
The extender scans for WiFi networks in your area and displays a list.
8. Select a WiFi network to extend and click the NEXT button.
If you do not want to extend both WiFi bands, clear the 2.4 GHz WiFi Networks or the
5 GHz WiFi Networks check box.
9. In the Password (Network Key) field, type the existing WiFi network password (also called passphrase or security key) and click the NEXT button.
10. Set the network name (SSID) and password for your new extender WiFi network and click the NEXT button.
11. Use a WiFi network manager on the computer or WiFi device to connect to the new extended WiFi network.
Repeat this step for all of your computers and WiFi devices.
12. Click the CONTINUE button.
Get Started
12
A message displays confirming that the extender is connected to the new extended WiFi network.
13. Click the NEXT button.
The registration screen displays.
14. Complete the registration fields and click the FINISH button to complete the setup.
If you do not want to register your extender, click the Skip Registration link. Note that you must register your extender before you can use NETGEAR telephone support.
The Status screen displays.
15. Unplug the extender and move it to a new location closer to the area with a poor WiFi signal.
The location that you choose must be within the range of your existing WiFi router network.
16. Plug the extender into an electrical outlet.
Wait for the Power LED to light amber and then turn green.
If the Power LED does not light, press the Power On/Off button.
17. Use the Router Link LED to help you choose a spot where the extender-to-router connection is optimal.
The extender connects to your existing router’s WiFi network.
Find the Best Location
If the WiFi signal is weak, the first time you join the extender network, the Router Link LED or
Device Link LED is amber or red. If this happens, adjust the position of the extender:
• If the Router Link LED is amber or red, move the extender closer to the router.
• If the Device Link LED is amber or red, move the computer or WiFi device closer to the extender.
Get Started
13
Connect an Ethernet-Enabled Device
After the extender is connected to your existing WiFi network, you can connect a wired device to the extender using an Ethernet cable. The device can then access your existing network through the extender’s WiFi connection.
Figure 4. Rear panel Ethernet LAN ports
Use the Extender in Access Point Mode
You can use the extender as a WiFi access point, which creates a new WiFi hotspot by using a wired Ethernet connection.
Figure 5. Extender in access point mode
Get Started
14
To use the extender in access point mode:
1. Plug the extender into an electrical outlet.
2. Wait for the Power LED to light amber and then turn green.
If the Power LED does not light, press the Power On/Off button on the side of the extender.
3. Use an Ethernet cable to connect the Ethernet port on the extender to a router Ethernet LAN port or a remote Ethernet LAN jack with LAN access.
The extender joins the LAN and creates a WiFi hotspot.
4. Use a WiFi network manager on a computer or WiFi device to find and connect to the
NETGEAR_EXT (SSID) WiFi network.
When you join the network, the extender Device Link LED lights to show that you are connected.
5. Launch a web browser and enter www.mywifiext.net
in the address field.
The New Extender Setup screen displays.
6. Click the NEW EXTENDER SETUP button.
The first time that you log in to the extender, the Create Account screen displays. If the
Create Account screen does not display, visit www.mywifiext.net
.
7. Complete the fields on the Create Account screen and click the NEXT button.
8. When prompted, select your country or region from the Regional Settings menu and click the NEXT button.
Get Started
15
9. Click the ACCESS POINT button.
The extender checks for an Internet connection.
10. Click the HOME NETWORK or PUBLIC NETWORK button.
11. When prompted, set the network name (SSID), security option, and password, and click the
NEXT button.
Your settings are applied and the extender is ready to be used as an access point.
12. Use a WiFi network manager on the computer or WiFi device to connect to the new access point network.
Repeat this step for all of your computers and WiFi devices.
13. Click the CONTINUE button.
A screen displays that says you successfully created an access point.
14. Click the NEXT button.
The registration screen displays.
15. Complete the registration fields and click the FINISH button to complete the setup.
If you do not want to register your extender, click the Skip Registration link. Note that you must register your extender before you can use NETGEAR telephone support.
The Status screen displays.
Log In to the Extender After Installation
After installation, you can log in to the extender to view or change the extender’s settings.
To log in to the extender:
1. Use a WiFi network manager on a computer or WiFi device to find and connect to the new extended WiFi network.
After the connection with the computer or WiFi device is established, the Device Link LED lights solid green.
2. Launch a web browser.
3. Enter www.mywifiext.net
in the address field of the browser.
A login screen displays.
4. Enter your email address and password and click the LOG IN button.
The Status screen displays.
Get Started
16
Run Smart Setup Installation
You can use Smart Setup to change the extender settings. This is an easy way to connect the extender to a different router or to change the extender WiFi network name (SSID) or WiFi password.
To run Smart Setup:
1. Use a WiFi network manager on a computer or WiFi device to find and connect to the new extended WiFi network.
After the connection with the computer or WiFi device is established, the Device Link LED lights solid green.
2. Launch a web browser.
3. Enter www.mywifiext.net
in the address field of the browser.
A login screen displays.
4. Enter your email address and password and click the LOG IN button.
The Status screen displays.
5. Click the SMART SETUP button.
The Welcome screen displays.
6. Click the WIFI RANGE EXTENDER button.
The extender scans for WiFi signals and finds the WiFi networks in your area and displays a list.
7. Select your WiFi network and click the NEXT button.
8. When prompted, enter the password to connect to your WiFi network and click the NEXT button.
A message displays when the extender connects to your existing router’s WiFi network.
9. Click the NEXT button.
The extender applies your settings to its WiFi network names and WiFi passwords.
During this change, the extender disconnects you from its WiFi network.
10. When prompted, connect your WiFi devices to the extender WiFi network and click the
CONTINUE button.
The registration screen displays.
11. Complete the registration fields and click the FINISH button to complete the setup.
If you do not want to register your extender, click the Skip Registration link. Note that you must register your extender before you can use NETGEAR telephone support.
The Status screen displays.
Get Started
17
3.
Extender Network Settings
This chapter covers the following topics:
•
•
Boost Your Video Streaming with FastLane Technology
•
•
•
Turn Off the SSID Broadcast to Create a Hidden Network
•
Disable or Enable the WiFi Radios
•
•
Use WPS to Add a Computer to the Extender’s WiFi Network
•
Deny Access to a Computer or WiFi Device
•
•
Change the Extender’s Device Name
•
Set Up the Extender to Use a Static IP Address
•
Use the Extender with MAC Filtering or Access Control
3
18
View Connected Devices
You can view a list of devices that are connected to the extender network.
To view connected devices:
1. On a computer or WiFi device that is connected to the extender network, launch a web browser.
2. In the address field of your browser, enter www.mywifiext.net
.
3. When prompted, enter your email address and password.
4. Click the Menu icon .
The extender menu displays.
5. Select Settings > Connected Devices .
Extender Network Settings
19
Boost Your Video Streaming with FastLane Technology
Get the most out of your HD entertainment with FastLane technology. With FastLane technology, the extender connects to your router using one band and connects to your devices using another band. Because a band is dedicated to each function, performance is enhanced.
If all your devices and your WiFi router support only the 2.4 GHz band, or all your devices and your WiFi router support only the 5 GHz band, do not enable FastLane Technology.
When you enable FastLane Technology, two options are available:
• Use the 2.4 GHz band to connect the extender to the WiFi devices and use the 5 GHz band to connect the extender to the WiFi router. Use this mode if your WiFi router supports the 5 GHz band but the devices that you want to use for gaming and streaming support the 2.4 GHz band.
• Use the 5 GHz band to connect the extender to the WiFi devices and use the 2.4 GHz band to connect the extender to the WiFi router. Use this mode if the devices that you want to use for gaming and streaming support the 5 GHz band but your WiFi router supports the 2.4
GHz band.
To activate FastLane mode:
1. On a computer or WiFi device that is connected to the extender network, launch a web browser.
2. In the address field of your browser, enter www.mywifiext.net
.
3. When prompted, enter your email address and password.
4. Click the Menu icon .
The extender menu displays.
5. Select Do More > FastLane .
6. Select the FastLane Technology radio button.
Extender Network Settings
20
The screen adjusts and displays two more radio buttons.
7. Select a radio button:
• Router-to-Extender in 2.4 GHz only and Extender-to-Device in 5 GHz only .
• Router to Extender in 5 GHz only and Extender-to-Device in 2.4 GHz only .
8. Click the Save button.
Your changes are saved.
View WiFi Settings
To view the WiFi settings:
1. On a computer or WiFi device that is connected to the extender network, launch a web browser.
2. In the address field of your browser, enter www.mywifiext.net
.
3. When prompted, enter your email address and password.
4. Click the Menu icon .
The extender menu displays.
5. Select Settings > WiFi .
Extender Network Settings
21
Change the WiFi Network Name
To change the WiFi network name:
1. On a computer or WiFi device that is connected to the extender network, launch a web browser.
2. In the address field of your browser, enter www.mywifiext.net
.
3. When prompted, enter your email address and password.
4. Click the Menu icon .
The extender menu displays.
5. Select Settings > WiFi .
6. In each Network Name (SSID) field, type a network name.
7. Click the SAVE button.
Your settings are saved.
Turn Off the SSID Broadcast to Create a Hidden Network
By default, the extender broadcasts its WiFi signal so that its wireless network names
(SSIDs) are easy for you to find and connect to from your computer, tablet, or smartphone.
You can turn off the SSID broadcast to create a hidden WiFi network. To connect to a hidden network you must know its SSID and password and manually enter them.
Extender Network Settings
22
To turn off the SSID broadcast to create a hidden network:
1. On a computer or WiFi device that is connected to the extender network, launch a web browser.
2. In the address field of your browser, enter www.mywifiext.net
.
3. When prompted, enter your email address and password.
4. Click the Menu icon .
The extender menu displays.
5. Select Settings > WiFi .
6. Clear the Broadcast the Network name (SSID) check box.
7. Click the SAVE button.
Your settings are saved.
Disable or Enable the WiFi Radios
By default, the extender’s WiFi radios broadcast signals in the 2.4 GHz and 5 GHz bands. If you disable the WiFi radios, then no one can connect with WiFi to the extender.
To disable or enable the WiFi radios:
1. On a computer or WiFi device that is connected to the extender network, launch a web browser.
2. In the address field of your browser, enter www.mywifiext.net
.
3. When prompted, enter your email address and password.
Extender Network Settings
23
4. Click the Menu icon .
The extender menu displays.
5. Select Settings > WiFi .
6. Select or clear the Enable 2.4 GHz WiFi check box.
7. Select or clear the Enable 5 GHz WiFi check box.
8. Click the SAVE button.
Your settings are saved.
Change the WiFi Speed
To change the WiFi speed:
1. On a computer or WiFi device that is connected to the extender network, launch a web browser.
2. In the address field of your browser, enter www.mywifiext.net
.
3. When prompted, enter your email address and password.
4. Click the Menu icon .
The extender menu displays.
Extender Network Settings
24
5. Select Settings > WiFi .
6. In each WiFi Speed menu, select a speed.
7. Click the SAVE button.
Your settings are saved.
Use WPS to Add a Computer to the Extender’s WiFi
Network
WPS (WiFi Protected Setup) lets you connect a computer or WiFi device to the extender’s network without entering the WiFi network passphrase or key. Instead, you use a WPS button or enter a PIN to connect.
If you use the button method, the WiFi device that you are trying to connect must include a physical push button or a software button. If you use the PIN method, you must know the PIN of the WiFi device that you are trying to connect.
WPS supports WPA and WPA2 WiFi security. If your extender network is open (no WiFi security is set), connecting with WPS automatically sets WPA + WPA2 WiFi security on the extender network and generates a random passphrase. You can view this passphrase on the
WiFi Settings screen (for more information, see
View WiFi Settings on page 21).
For information about using WPS to connect the extender to a WiFi network during setup, see
Use the Extender in Access Point Mode on page 14.
Extender Network Settings
25
Use WPS with the Push Button Method
For you to use the push button method to connect a WiFi device to the extender’s WiFi network, the WiFi device that you are trying to connect must include a physical WPS button or an onscreen WPS button that you can click.
To use WPS to add a computer or WiFi device to the extender’s WiFi network:
1. On a computer or WiFi device that is connected to the extender network, launch a web browser.
2. In the address field of your browser, enter www.mywifiext.net
.
3. When prompted, enter your email address and password.
4. Click the Menu icon .
The extender menu displays.
5. Select Settings > Do More > Connect Devices (WPS) .
6. Leave the Push Button (recommended) radio button selected.
7. Click the WIFI PROTECTED SETUP (WPS) button.
For two minutes, the extender attempts to add the computer or WiFi device to its WiFi network.
8. Within two minutes, go to the computer WiFi device and press or click its WPS button.
9. To verify that the WiFi device is connected to the extender’s WiFi network, select
Settings > Connected Devices .
The WiFi device displays onscreen.
Use WPS with the PIN Method
To use the PIN method to connect a WiFi device to the extender’s WiFi network, you must know the PIN of the WiFi device that you are trying to connect.
To add a computer or WiFi device to the extender’s WiFi network:
1. On a computer or WiFi device that is connected to the extender network, launch a web browser.
2. In the address field of your browser, enter www.mywifiext.net
.
Extender Network Settings
26
3. When prompted, enter your email address and password.
4. Click the Menu icon .
The extender menu displays.
5. Select Settings > Do More > Connect Devices (WPS) .
The Connect Devices (WPS) screen displays.
6. Select the PIN Number radio button.
7. Type the PIN of the WiFi device in the field.
8. Click the NEXT button.
For four minutes, the extender attempts to find the computer or WiFi device.
9. Within four minutes, go to the WiFi device and use its WPS software to join the WiFi network.
10. To verify that the WiFi device is connected to the extender’s WiFi network, select
Settings > Connected Devices .
The WiFi device displays onscreen.
Deny Access to a Computer or WiFi Device
By default, access control is disabled so that it is easy for you to connect to the extender’s
WiFi networks.
You can deny network access to specific computers and WiFi devices based on their MAC addresses. Each network device is assigned a MAC address, which is a unique 12-character physical address, containing the hexadecimal characters 0–9, a–f, or A–F only, and separated by colons (for example, 00:09:AB:CD:EF:01). Typically, the MAC address is on the label of the WiFi device. If you cannot access the label, you can display the MAC address using the network configuration utilities of the computer. You might also find the MAC
addresses on the Connected Devices screen (see View Connected Devices on page 19).
To use WiFi access control to deny access:
1. On a computer or WiFi device that is connected to the extender network, launch a web browser.
2. In the address field of your browser, enter www.mywifiext.net
.
Extender Network Settings
27
3. When prompted, enter your email address and password.
4. Click the Menu icon .
The extender menu displays.
5. Select Settings > Connected Devices .
6. In the WiFi Devices section, select the Enable Access Control check box.
The WiFi devices table displays the names and MAC addresses of WiFi devices that are connected to the extender.
7. Select the Deny check box for the device.
8. Click the SAVE button.
Your settings are saved and that device cannot connect to the extender’s WiFi network.
Set Up an Access Schedule
You can control access to all users during specific periods of the day. You can set up an access schedule that prevents Internet access through the extender network based on the times that you set.
To set up an access schedule:
1. On a computer or WiFi device that is connected to the extender network, launch a web browser.
2. In the address field of your browser, enter www.mywifiext.net
.
3. When prompted, enter your email address and password.
Extender Network Settings
28
4. Click the Menu icon .
The extender menu displays.
5. Select Do More > Access Schedule .
6. Select the Access Schedule On radio button.
The screen adjusts.
7. In the Days menu and the Time menu, select the days and time when you want to disable
Internet access.
8. Click the Add Time button to add the time that you specified to the Scheduled Times table.
9. Click the SAVE button.
Your settings are saved.
Change the Extender’s Device Name
The default name is EX3700.
To change the extender’s device name:
1. On a computer or WiFi device that is connected to the extender network, launch a web browser.
2. In the address field of your browser, enter www.mywifiext.net
.
3. When prompted, enter your email address and password.
4. Click the Menu icon .
The extender menu displays.
5. Select Settings > WiFi Settings .
The WiFi Settings screen displays.
Extender Network Settings
29
6. Scroll down and click the IP Address heading.
7. In the Device Name field, type a name.
8. Click the SAVE button.
Your settings are saved.
Set Up the Extender to Use a Static IP Address
The extender comes set up to use a dynamic IP address, which is the correct setting for most home networks.
To set up the extender to use a static IP address:
1. On a computer or WiFi device that is connected to the extender network, launch a web browser.
2. In the address field of your browser, enter www.mywifiext.net
.
3. When prompted, enter your email address and password.
4. Click the Menu icon .
The extender menu displays.
5. Select Settings > WiFi Settings .
The WiFi Settings screen displays.
6. Scroll down and click the IP Address heading to expand the IP address settings.
Extender Network Settings
30
By default, the Dynamically get IP Address from Router radio button is selected.
7. Select the Use Static IP Address radio button.
8. Complete the fields to specify the IP network IP addresses.
9. Click the SAVE button.
Your settings are saved.
Use the Extender with MAC Filtering or Access Control
When the WiFi device connects through the extender to your router, the MAC address of the wireless device shown on the router is translated to another MAC address. If your router's
MAC filter, wireless access control, or ACL is enabled, the WiFi device connects to the extender but cannot get an IP address from the extender and cannot access the Internet. To allow the wireless device to receive an IP address from the extender and access the Internet, you must provide the translated MAC address to the router.
To add a translated MAC address to your router:
1. Log in to your router and disable the MAC filter, wireless access control, or ACL.
For more information about how to disable your router’s MAC filter, wireless access control, or ACL, see your router’s documentation.
2. Power on the extender and connect all of your WiFi devices to the extender.
3. Make sure that the Link Rate LED remains lit.
4. Log in to your extender: a.
Launch a web browser.
b. Enter www.mywifiext.net
in the address field of the browser.
A login screen displays.
c. Enter your email address and password and click the LOG IN button.
5. Click the Menu icon .
The extender menu displays.
6. Select Settings > Connected Devices .
The Connected Devices section displays the MAC addresses and virtual MAC addresses for computer and WiFi devices that are connected to the extender network.
7. On the router, add the extender’s virtual MAC address and all the virtual MAC addresses connected to the extender network to your router’s MAC filter table.
8. Enable the router’s MAC filter, wireless access control, or ACL.
Extender Network Settings
31
4.
Maintain and Monitor the Extender
4
This chapter covers the following topics:
•
Change the Extender User Name and Password
•
Turn Password Protection Off and On
•
Recover a Forgotten User Name or Password
•
Automatically Adjust for Daylight Saving Time
•
Manually Set the Extender Clock
•
Back Up and Manage the Extender Configuration
•
Back Up the Configuration Settings
•
Return the Extender to Its Factory Default Settings
•
•
32
Change the Extender User Name and Password
You can change the user name and password to log in to the extender.
To add an extender user:
1. On a computer or WiFi device that is connected to the extender network, launch a web browser.
2. In the address field of your browser, enter www.mywifiext.net
.
3. When prompted, enter your email address and password.
4. Click the Menu icon .
The extender menu displays.
5. Select Settings > Password Settings .
6. In the New User Name field, type an email address.
7. Type the password in the New Password field and the Verify Password field.
8. Select questions and enter the answers.
9. Click the SAVE button.
Your settings are saved.
Maintain and Monitor the Extender
33
Turn Password Protection Off and On
NETGEAR recommends that you leave password protection on to help keep your network secure. You can turn password protection off and on.
To turn password protection off or on:
1. On a computer or WiFi device that is connected to the extender network, launch a web browser.
2. In the address field of your browser, enter www.mywifiext.net
.
3. When prompted, enter your email address and password.
4. Click the Menu icon .
The extender menu displays.
5. Select Settings > Password Settings .
The Password Settings screen displays.
6. Select the Password Off or Password On radio button.
7. Click the SAVE button.
Your settings are saved.
Recover a Forgotten User Name or Password
If you changed the password to access the extender and set up password recovery, you can recover your password if you lose it.
To recover your password to access the extender:
1. On a computer or WiFi device that is connected to the extender network, launch a web browser.
2. In the address field of your browser, enter www.mywifiext.net
.
You are prompted to enter a user name and password.
3. Click the Username & Password Help link.
A screen displays requesting the answers to your security questions.
If you forgot the answers to your security questions, restore the extender’s factory
settings and set up your login credentials again. See Return the Extender to Its Factory
Default Settings on page 37 and
4. Enter the saved answers to your security questions.
5. Click the NEXT button.
Your email and password are displayed.
6. Click the BACK button.
Maintain and Monitor the Extender
34
A login screen displays.
7. Log in to the extender.
Automatically Adjust for Daylight Saving Time
To set up the extender to automatically adjust for daylight saving time:
1. On a computer or WiFi device that is connected to the extender network, launch a web browser.
2. In the address field of your browser, enter www.mywifiext.net
.
3. When prompted, enter your email address and password.
4. Click the Menu icon .
The extender menu displays.
5. Select Do More > Access Schedule .
The Access Schedule screen displays.
6. Select the Automatically adjust for daylight savings time check box.
7. Click the SAVE button.
Your settings are saved.
Manually Set the Extender Clock
To manually set the extender clock:
1. On a computer or WiFi device that is connected to the extender network, launch a web browser.
2. In the address field of your browser, enter www.mywifiext.net
.
3. When prompted, enter your email address and password.
4. Click the Menu icon .
The extender menu displays.
5. Select Do More > Access Schedule .
The Access Schedule screen displays.
6. In the Extender Clock section, select the Manual radio button.
7. To specify the time, complete the fields or click the Sync Clock button to synchronize the extender time to the time on the computer or WiFi device that you are using.
8. Click the SAVE button.
Your settings are saved.
Maintain and Monitor the Extender
35
Back Up and Manage the Extender Configuration
When the extender works correctly after initial setup, NETGEAR recommends that you back up the extender configuration settings. After you have back up the settings, if you change the extender configuration settings but are not content with the new settings, you can restore the extender configuration to the backed-up settings.
Back Up the Configuration Settings
You can back up the configuration file of the extender.
To back up the extender configuration settings:
1. On a computer or WiFi device that is connected to the extender network, launch a web browser.
2. In the address field of your browser, enter www.mywifiext.net
.
3. When prompted, enter your email address and password.
4. Click the Menu icon .
The extender menu displays.
5. Select Settings > Other Settings .
6. Click the BACKUP button.
Your browser extracts the configuration file from the extender. By default, the name of the backup file is NETGEAR_Ex7000.cfg
.
7. If your browser is not set up to save downloaded files automatically, locate where you want to save the file.
Restore the Configuration Settings
You can restore the configuration file of the extender to a previously saved configuration file.
To restore the extender configuration settings:
1. On a computer or WiFi device that is connected to the extender network, launch a web browser.
2. In the address field of your browser, enter www.mywifiext.net
.
Maintain and Monitor the Extender
36
3. When prompted, enter your email address and password.
4. Click the Menu icon .
The extender menu displays.
5. Select Settings > Other Settings .
6. Click the BROWSE button.
7. Locate and select the previously saved backup file.
By default, the name of the backup file is NETGEAR_EX7000.cfg
.
CAUTION:
After you click the RESTORE button, do not try to go online, turn off the extender, shut down the computer, or do anything else to the extender until it finishes restarting!
8. Click the RESTORE button.
A confirmation pop-up screen displays.
9. Confirm your decision.
The extender configuration is restored and the extender restarts. This process takes about one minute.
Return the Extender to Its Factory Default Settings
Under some circumstances (for example, if you lose track of the changes that you made to the extender settings), you might want to erase the configuration and reset the extender to factory default settings.
To reset the extender to factory default settings, you can either use the Factory Reset button on the rear panel or log in to the extender and reset it.
For a list of factory default settings, see Factory Default Settings on page 46.
Maintain and Monitor the Extender
37
To use the Factory Reset button to return the extender to factory default settings:
CAUTION:
This process erases any settings that you configured in the extender.
1. Insert a straightened paper clip into the hole of the Factory Reset button and hold it for about seven seconds.
Factory Reset button
2. Release the button.
CAUTION:
Do not try to go online, turn off the extender, shut down the computer, or do anything else to the extender until it finishes restarting!
The extender resets and restarts. This process takes about one minute.
To log in to the extender and reset the extender’s to factory settings:
CAUTION:
This process erases any settings that you configured in the extender.
1. On a computer or WiFi device that is connected to the extender network, launch a web browser.
2. In the address field of your browser, enter www.mywifiext.net
.
3. When prompted, enter your email address and password.
4. Click the Menu icon .
Maintain and Monitor the Extender
38
The extender menu displays.
5. Select Settings > Other Settings .
CAUTION:
After you click the RESET button, do not try to go online, turn off the extender, shut down the computer, or do anything else to the extender until it finishes restarting!
6. Click the Factory Reset button.
A confirmation pop-up screen displays.
7. Confirm your decision.
The extender returns to its factory settings and restarts. This process takes about one minute.
Update the Firmware
Unless you changed the settings in the Firmware Update screen previously, the extender is set up to check for new firmware automatically at login.
To check manually for new firmware and, if available, update the firmware:
1. On a computer or WiFi device that is connected to the extender network, launch a web browser.
2. In the address field of your browser, enter www.mywifiext.net
.
3. When prompted, enter your email address and password.
4. Click the Menu icon .
The extender menu displays.
Maintain and Monitor the Extender
39
5. Select Settings > Firmware Update .
6. Click the CHECK ONLINE button.
7. If new firmware is available, follow the onscreen prompts to download it onto your computer.
Note: You might need to unzip the firmware file.
8. Click the BROWSE button.
9. Locate and select the new firmware file.
The firmware file name ends with a .chk
extension.
CAUTION:
After you click the UPLOAD button, do not try to go online, turn off the extender, shut down the computer, or do anything else to the extender until it finishes restarting!
10. Click the UPLOAD button.
The firmware update starts and the extender restarts. The firmware update process takes a couple of minutes.
Restart the Extender Remotely
You can log in to the extender and restart it. When the extender restarts, all computers and
WiFi devices that are connected to its WiFi network are automatically disconnected.
To restart the extender remotely:
1. On a computer or WiFi device that is connected to the extender network, launch a web browser.
2. In the address field of your browser, enter www.mywifiext.net
.
3. When prompted, enter your email address and password.
4. Click the Menu icon .
The extender menu displays.
5. Select Settings > Other Settings .
Maintain and Monitor the Extender
40
The Other Settings screen displays.
6. Click the RESTART button and click the Yes button to confirm.
The extender restarts, which takes about two minutes.
Maintain and Monitor the Extender
41
5.
FAQs and Troubleshooting
This chapter covers the following topics:
•
•
Cannot Connect to the Extender
•
Cannot Join a WiFi Network and Receive an Error Message
5
42
FAQs
This section provides answers for difficulties you might experience with the extender.
The web browser setup Keeps asking me for my network password (passphrase) or security key, and I am sure that I entered the correct password. What can I do?
The extender is probably placed at the borderline of the range covered by the router or access point. For more information about where the place the extender, see
If you are using WEP security, make sure that you are typing the network password in the correct field.
Can I set up the extender in extender mode if I connect it to the router or access point with an Ethernet cable?
No. The extender is designed to connect wirelessly to the router or access point if it is in extender mode. If the extender is in access point mode, you can connect it to the router or access point with an Ethernet connection. For more information about access point mode, see
Use the Extender in Access Point Mode on page 14.
I forgot my login email address and password. What can I do?
On the login screen, click the Username & Password Help link to answer the security
questions that you set up during the initial setup. For more information, see Recover a
Forgotten User Name or Password on page 34
To restore factory settings:
1. Use a sharp object such as a pen or paper clip to press and hold the Factory Reset button on the extender for at least five seconds until the Power LED lights amber.
2. Release the Factory Reset button and wait for the extender to reboot.
The extender resets and returns to the factory default settings.
Cannot Connect to the Extender
If you cannot connect to the extender, determine what prevents you from connecting:
• If you forgot your user name or password, click the Username & Password Help link.
For more information, see
• If your browser displays an error page, include http:// in the address field of your browser by typing http://www.mywifiext.net
.
• If you already set up the extender but can no longer connect to it over WiFi, check to see if the Device Link LED is off or red.
• If you cannot get a WiFi connection working, you can use an Ethernet cable to connect your computer to the extender.
FAQs and Troubleshooting
43
Cannot Join a WiFi Network and Receive an Error Message
To join a WiFi network, you must know its network name (also called the SSID) so that you can select it. If the network is secure, you must know the passphrase or key. If the extender does not connect to the network that you select, the cause might be one of the following:
• It is possible that you typed the network name, passphrase, or key incorrectly. Use Smart
Setup (see Run Smart Setup Installation on page 17) to select a WiFi network and retype
the passphrase or key. The passphrase or key is case-sensitive. For example,
PASSWORD25 is not the same as Password25 or password25.
• If the extender cannot detect your WiFi network, check to see if your WiFi network is still working. Make sure that the WiFi router is turned on. If possible, move the extender closer to the WiFi router.
• If the extender Device Link LED is red, the WiFi connection between the WiFi router and the extender is poor. You can establish the best connection with a clear line of sight between the extender and the WiFi router. Make sure that no physical obstacles exist between the extender and the WiFi router, and try to move the extender closer to the WiFi router.
If you use Smart Setup, and the extender does not connect to the WiFi router, does not connect to the Internet, or cannot get an IP address from the WiFi router, Smart Setup displays a message to notify you that the extender is not configured.
To run Smart Setup again, click the YES button. To manually configure the extender, click the
NO, CONFIGURE MANUALLY button.
FAQs and Troubleshooting
44
A.
Factory Settings and Technical
Specifications
This appendix covers the following topics:
•
•
Technical and Environmental Specifications
A
45
Factory Default Settings
To reset the extender to factory default settings, you can use either the Factory Reset button on the rear panel or you can log in and click the onscreen RESET button. For more information, see
Return the Extender to Its Factory Default Settings on page 37.
The following table shows the factory default settings.
Table 2. Factory default settings
Feature
Smart Setup
WiFi communication
WiFi network name (SSID)
Default Settings
Enabled
Enabled
NETGEAR_EXT
Disabled
Auto 1
Security
Transmission speed
Country/region
Operating mode
Data rate in the 2.4 GHz band
Data rate in the 5 GHz band
Varies by region
802.11a/b/g/n/ac
54/145/300 Mbps
54/145/300/433 Mbps
DHCP Client enabled
1. Maximum WiFi signal rate (IEEE Standard 802.11). Actual throughput can vary. Network conditions and environmental factors, including volume of network traffic, building materials and construction, and network overhead lower actual data throughput rate.
Factory Settings and Technical Specifications
46
Technical and Environmental Specifications
The following table shows the technical and environmental specifications.
Table 3. Technical specifications
Technical Specifications
Network protocol and standards compatibility
Physical specifications
Environmental
Interface
Electromagnetic emissions
Data and routing protocols: TCP/IP, DHCP server and client, DNS relay, NAT
(many-to-one), VPN pass-through (IPSec, PPTP)
• Dimensions: 55.17 x 67.17 x 39 mm (2.17 x 2.64 x 1.54 in.)
• Weight: 130 g (0.29 lb)
• Operating temperature: 32° to 104°F (0° to 40°C)
• Operating humidity: 90% maximum relative humidity, noncondensing
• Local: 10BASE-T, 100BASE-TX, RJ-45
• 802.11ac, 802.11a, 802.11g, 802.11b
Meets requirements of FCC Part 15 Class B.
Factory Settings and Technical Specifications
47
advertisement
Key Features
- 100 Mbit/s
- 10/100Base-T(X)
- Wi-Fi 750 Mbit/s Wi-Fi 5 (802.11ac), 802.11b, 802.11g, Wi-Fi 4 (802.11n)
- White
Related manuals
advertisement
Table of contents
- 6 Meet Your Extender
- 6 Front Panel
- 6 Side Panels
- 7 When to Use Your Extender
- 7 How the Extender Works
- 10 Install the WiFi Extender
- 10 Place the Extender and Apply Power
- 10 Connect to an Existing WiFi Network
- 13 Find the Best Location
- 14 Connect an Ethernet-Enabled Device
- 14 Use the Extender in Access Point Mode
- 16 Log In to the Extender After Installation
- 17 Run Smart Setup Installation
- 19 View Connected Devices
- 20 Boost Your Video Streaming with FastLane Technology
- 21 View WiFi Settings
- 22 Change the WiFi Network Name
- 22 Turn Off the SSID Broadcast to Create a Hidden Network
- 23 Disable or Enable the WiFi Radios
- 24 Change the WiFi Speed
- 25 Use WPS to Add a Computer to the Extender’s WiFi Network
- 26 Use WPS with the Push Button Method
- 26 Use WPS with the PIN Method
- 27 Deny Access to a Computer or WiFi Device
- 28 Set Up an Access Schedule
- 29 Change the Extender’s Device Name
- 30 Set Up the Extender to Use a Static IP Address
- 31 Use the Extender with MAC Filtering or Access Control
- 33 Change the Extender User Name and Password
- 34 Turn Password Protection Off and On
- 34 Recover a Forgotten User Name or Password
- 35 Automatically Adjust for Daylight Saving Time
- 35 Manually Set the Extender Clock
- 36 Back Up and Manage the Extender Configuration
- 36 Back Up the Configuration Settings
- 36 Restore the Configuration Settings
- 37 Return the Extender to Its Factory Default Settings
- 39 Update the Firmware
- 40 Restart the Extender Remotely
- 43 FAQs
- 43 Cannot Connect to the Extender
- 44 Cannot Join a WiFi Network and Receive an Error Message
- 46 Factory Default Settings
- 47 Technical and Environmental Specifications