Edimax BR-6258n Nano router User Manual
Add to My manuals6 Pages
Edimax BR-6258n Nano router is a compact wireless router with various capabilities to extend and enhance your home network. With its 150 Mbps wireless speed and Universal Repeater mode, it can easily connect to your existing wireless network, extending its range and eliminating dead spots. The router also supports multiple security protocols, ensuring a secure connection for your devices. Additionally, you can disable the router function and use the BR-6258n as a wireless access point, providing wired devices with wireless connectivity.
advertisement
EDIMAX COMPUTER INC.
Edimax BR-6258n Nano router
150Mbps Wireless Broadband Router
© 2011 Edimax Computer
3350 Scott Blvd., Building #15
Santa Clara, California 95054, USA
Phone 408-496-1105 • Fax 408-980-1630 www.edimax.us
Edimax BR-6258n
Congratulations on your purchase of the Edimax BR-6258n. It is currently the smallest wireless router, and we back them up with great technical support. We are committed to making you a success because our success depends on yours.
This is a detailed step-by-step installation instruction for the Universal Repeater mode setup.
Assumptions:
1. You have the Edimax BR-6258n Wireless router.
2. You use Ethernet cable to connect your computer to LAN port (the Yellow port) of BR-6258n.
3. Keep the WAN port (the Blue port) of BR-6258n unplugged.
4. Power on BR-6258n router either by using its power adapter or by using its USB cable with a USB port of the computer.
5. Your main wireless router is powered on. Its DHCP server function is enabled. The main wireless router will give dynamic IP addresses to computers in the network.
6. If your main wireless router has wireless encryption setting, you know the wireless encryption passphrase (also known as network key or password) of your wireless network.
Fig. 1
Open web browser like Internet
Explorer.
In the address box, enter http://192.168.2.1
hit Enter.
Enter the default username and password.
Username: admin
Password 1234
Get into the router’s configuration page.
Fig. 2
Click on General Setup in the menu.
Click on Wireless.
In the field of “Mode”, select
“Universal Repeater” as the Mode.
Fig. 3
The button “Select Site Survey” appeared.
Click on the “Select Site Survey” button..
Fig. 4
A new window pops up and shows available wireless networks.
Select your wireless network.
Click on Done. The Wireless Site
Survey window close automatically..
Fig. 5
The SSID name of your main wireless network appeared in the box of “Root AP SSID”.
In this example, we use “Edimax” as the SSID of the repeater. Later our wireless computers will connect to the repeater which has SSID named
“Edimax”.
Click on Apply button.
Fig. 6
Click on Continue button.. We have more configuration to set.
Fig. 7
Go to Security Settings. The encryption is disabled by default.
If your wireless router has wireless encryption enabled, you need to use the same security password in the repeater. If you are not sure about the encryption passphrase, you may need to check the setting in your wireless router.
Fig. 8
If your wireless router has options like WPA2-personal, WPApersonal, WPA/WPA2 mixed.
Please make sure you select WPA2personal. Do not use the option of
Mixed mode.
Here we enter the pre-shared key
(also known as passphrase). Click on Apply
Fig. 9
Click on Continue button. Later we are going to disable router function.
.
Fig. 10
Click on LAN setting.
Have the option of “DHCP Server” turn off.
The default IP address is
192.168.2.1. It is optional that you assign a new IP address to the repeater. The repeater can work fine even its IP address is not in the wireless network.
However, you may want to assign a new IP to the repeater which may help you trouble shoot and easily access the repeater setup later.
Click on Apply.
Fig. 11
Click on Continue button. We have one more setting to be done.
Fig. 12
Go to NAT settings.
Go to the option of “Static Routing”.
Put a check on the check box of
“Enable Static Routing”. Click on
Apply.
Fig. 13
Click on Apply for the router save settings and reboot.
After 60 seconds, the router becomes as a repeater
Fig. 14
After 60 seconds, the router will become as a repeater.
Fig. 15
Verify if your Ethernet computer has
Internet.
If it has Internet, you can have your wireless computers connect to the repeater.
Congratulations! You’ve finished the repeater setup.
Sometimes in order for your computer get the IP address from your wireless router, you need to go into cmd prompt and type “ipconfig
/release” hit Enter, type “ipconfig
/renew” hit Enter key.
To go into cmd prompt:
For Windows XP, click on Start ->
Run, enter “cmd” hit OK.
For Windows Vista/Windows 7, click on Start, go to the box of
“Search programs and files” enter
“cmd” hit Enter key.
advertisement
Related manuals
advertisement