Secvest Wireless Info Module
Art. no. FUMO50030
Page 1 of 1
Powered by TCPDF (www.tcpdf.org)
• Provides Secvest status information
• 8 LED displays
• Various signal and alarm tones
• Integrated piezo sounder
Acoustic and visual indication of system statusThe Secvest wireless info module is an optional Secvest accessory.
An LED display and various signal tones are used to indicate all processes and alarm system statuses. For example, input and output delays are indicated by a feedback tone via the info module. Faults, information on sub-areas, and zone statuses are also displayed on the info module. If an alarm is triggered, the internal piezo sounder also generates an internal alarm of about 90 dB.
Technical Data:
Installation
Dimensions
Connections
Display
Width
Radio frequency
Housing material
Height
Integrated siren
Length
Power consumption
Max. operating temperature
Max. humidity
Max. receiving range
(outdoors)
Suface mounted
(WxHxD) 124x124x40.7 mm
12V
8 LEDs of different colors
124 mm
868,6625 MHz
ABS
124 mm
Yes
40,7 mm
0,48 W
55 °C
96 %
100 m
Technical alterations reserved. Misprints and errors excepted. Copyright. © ABUS 01/2022
Max. receiving range
(building)
Min. operating temperature
Modulation
Installation location
Net weight
Sound pressure
IP protection class
Security level
DC voltage supply
Power consumption
Environmental class
30 m
-10 °C
FM
Indoors
0,2 kg
90 dB
54
2
9-14 V
53 mA
II