![](http://s3.manualzz.com/store/data/063872969_1-b881f67f0f9e36a1b59ce317ea795937-128x128.png)
advertisement
![eatsmart ESBS-59 Instruction Manual | Manualzz eatsmart ESBS-59 Instruction Manual | Manualzz](http://s3.manualzz.com/store/data/063872969_1-b881f67f0f9e36a1b59ce317ea795937-360x466.png)
8
Connect with EatSmart
EatSmart Products
EatSmartScales
EatSmart Products
EatSmartScales www.eatsmartproducts.com
www.eatsmartblog.com
Precision POWER
Battery Free
Digital Bathroom Scale
Model ESBS-59
ESBS-59
IBESBS59 8.16
WC
EatSmart Products
Seattle, WA 98134
Call: 866-843-3905 (8 to 5 MST) eatsmartproducts.com
INTRODUCTION
Thank you for purchasing an EatSmart Product. Your EatSmart Precision Power
Digital Bathroom Scale has been specifically designed for your use, with an easy to use interface and superior EatSmart accuracy and design.
The EatSmart Precision Power digital scale will allow for quick and accurate body weight measurements. With its unique simple push power generation technology you will never need to purchase or replace batteries for this excellent scale!
Please read this instruction manual carefully before use.
Your EatSmart Bathroom Scale comes with the following:
• EatSmart Precision Power Digital Bathroom Scale
• Instruction Manual
• 2 Year EatSmart Guarantee
Please fill out your purchase information for future reference:
Date Purchased: ___________________
Place of Purchase: __________________
Order ID (if any): __________________
If you have any questions regarding the operation of your Precision Power
Digital Bathroom Scale, please call 866-843-3905 from 8:00 AM to 5:00 PM,
Monday through Friday, Mountain Standard Time.
2
Weighing Operation
The EatSmart Precision Power Digital Bathroom Scale does not require batteries for use!
1. Select your desired measurement unit.
Your scale is set to default to pounds at the factory, but you can switch the measurement units to pounds or kilograms by stepping down on the push button then pressing the unit switch under your scale.
2. Place the scale on a hard, flat surface.
Carpeted or uneven floors can negatively affect the accuracy of your readings.
3. Turn on the scale.
Quickly push the button once and wait for the scale to charge before stepping on the platform. The scale will display “0.0” when it is ready for use.
4. Step on the scale.
Place both feet on the scale and stand still while your weight is being measured.
5. Your weight will appear on the LCD.
Your weight will blink two times when your final weight has been calculated.
6. Step off the scale.
The scale will turn off automatically once it loses power.
3
TROUBLESHOOTING
PROBLEM SOLUTION
Scale displays “ Err ”
Too much weight has been placed on the scale and it is overcapacity. Remove the weight immediately to avoid permanent damage.
Scale displays “ ”
Low power indication. Quickly push the button once on the platform to charge the scale and power on.
Other conditions Call Eat Smart for support at 866-843-3905 (8 to 5 MST).
4
CARE & MAINTINANCE
To protect your EatSmart Bathroom Scale in the best possible condition follow these directions as closely as possible.
1. Store and operate the unit in safe dry location.
Drastic changes in temperature over time can affect the quality of weight measurement.
Do not expose to direct sunlight, extreme hot/cold or humidity.
2. Clean with a soft, damp cloth.
Avoid abrasive cleaners and never sink or submerge in water.
3. Avoid excessive impact or vibration to the scale, such as dropping it onto the floor.
4.
Use unit consistent with instructions provided in this manual.
5. Do not store anything on the scale, as it is a sensitive weighing device.
Do not store in an upright position.
6. For accurate results, place scale on a flat surface.
Do not use on a wet and slippery floor. To avoid injury do not stand on the edge of the scale platform.
7.
This scale is designed to read weights between 17 and 330 lb/ 8 and
150 kg.
SPECIFICATIONS
Model: EatSmart Precision Power Digital Bathroom Scale - ESBS-59
Capacity: 330 lb or 150 kg
Measurement Units: Pounds / Kilograms
Graduation: 0.2lb / 0.1kg
Display: 3.0” LCD
Low Battery Indicator: “
Overload Indicator: “Err”
”
Unit Dimensions: Approximately 12.5” x 10.25” x 1.75”
Unit Weight: Approximately 3.4 lb
Power: Battery free technology, automatic power generation control
5
6
WARRANT Y
The EatSmart warranty covers defects in material and workmanship of the product under normal use for a period of two (2) years from the date of retail purchase. The warranty does not cover damages resulting from misuse, abuse, immersion, normal wear and tear or unauthorized modification.
Should this scale require service (or replacement at our option) while under warranty, please contact EatSmart for return authorization and troubleshooting.
EatSmart 866-843-3905 (8:00 AM to 5:00 PM MST) or eatsmartproducts.com
There are no expressed warranties except as listed above. This warranty gives you specific legal rights which may vary from state to state.
NOT LEGAL FOR TRADE.
Made in China
FCC INFORMATION
Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
7
advertisement
Related manuals
advertisement