VIDEO-SPLITTER

1 In 2 Out

(DC-42100)

1 In 4 Out

(DC-43100)

1 In 8 Out

USER MANUAL

DC-41100, DC-42100, DC-43100

Package Contents-

DC-41100, DC-42100 or DC-43100 Video Splitter

1 user manual

1 power adapter 12V 600mA for DC-41100,

DC-42100 or DC-43100

Introduction

Through the video splitter DC-41100, DC-42100,

DC-43100, you can use one PC to display identical image on 2,4,8 monitors or even more.

Video splitter is ideal for:

Test bench facilities

Data Center

Help desks

Video broadcasting:

Presentation

Stock quotes

Timetables

Educational facilities

Features

With 300 MHz pixel frequency.

Extends the video signal up to 65 meter (213 feet).

Supports the DDC, DDC2, DDC2B. (For video out port

1)

Can be cascaded.

The output is compatible with standard VGA card.

Specifications

Function DC-41100 DC-42100 DC-43100

Video Input

Connector

(HD-15 Male)

Video Output

Connector

(HD-15 Female)

Max. Resolution

Pixel Frequency

Cable Distance

(Device to Monitor)

Signal Type

Power Adapter (Min.)

1 1 1

2 4 8

1920 x 1440 60 Hz

300 MHz

65 m (213 feet) Max.

VGA, SVGA, XGA, Multisync

DC 12V 600mA

Housing Metal

Weight

Dimensions (LxWxH) mm

420 g 455 g

130x75x42

680 g

200x75 x42

-1-

Technical Specifications

Input/Output Signal

Pin # Signal Pin # Signal

1 Red 9 NC

2 Green 10 Ground

3 Blue 11 ID0

4 ID2

5 Ground

12 ID1

13 Horizontal

6 Analog Ground 14 Vertical Sync

7 Analog 15 ID3

FRONT VIEW

1. Power LED

REAR VIEW

1. Input Power Jack

2. “Video In” Port

3. “Video Out” Port

*There are 2/4/8 out ports for DC-41100, DC-42100,

DC-43100.

-2-

Installation

1. Turn off the PC and monitors.

2. Connect the HD-15 video extension cable between the

PC and the “video in” port of splitter.

3. Connect the HD-15 video extension cables between the monitors and the “video out” ports of splitter.

4. Connect the power cord and turn on the splitter.

5. Turn on the PC and monitors.

Note:

If you install the DDC monitor for the splitter, the rest of monitors must be the same resolution as the DDC monitor.

Available monitors include the VGA, SVGA, XGA,

Multisync, and exclude the CGA, EGA, Mono.

Operation for cascade:

1. The function to display identical image on more monitors, you request to attach another splitter.

2. Connect the HD-15 male/male video extension cable between the “video out” port of the former splitter and the “video in” port of the latter splitter.

Note:

Even though you are allowed to cascade the splitter with varied ports, the image might become unstable if cascade too many tiers of splitters.

P.S.: The example cascades the 4 and 8 ports splitters; however, you can cascade the video splitter with demanded port.

-3-

Trademarks:

All the companies, brand names, and product names referred to this manual are the trademarks or registered trademarks belonging to their respective companies.

-4-