- Computers & electronics
- Computer components
- System components
- Interface cards/adapters
- Digitus
- DS-33203-2
- Owner's manual
Digitus DS-33203-2 Firewire A Add-on PCI Card Owner's Manual
Add to My manuals4 Pages
Digitus DS-33203-2 Firewire A Add-on PCI Card is a high-performance expansion card that provides four IEEE 1394 (FireWire) ports for connecting high-speed peripherals such as DV camcorders, external hard drives, and scanners. It supports data transfer rates of up to 400 Mbps and is compatible with Windows, Mac, and Linux operating systems. With its hot-swapping capability, you can easily connect and disconnect devices without having to power down your system.
advertisement
Firewire A Add-on PCI Card
User Manual
DS-33203-2
Features and Benefits
Chipset: TI TSB43AB23
PCI 32-bit 33MHz Interface
Compliant IEEE 1394-1995, 1394a (rev. 1.1) and OHCI Interface
Specification 1.0
Supports data transfer rates of 100, 200 and 400 Mbps
Hot-swapping features allows you to connect/disconnect devices without powering down your system
Adds four IEEE 1394 (FireWire) ports to your PC for high-speed
I/O connectivity and support up to 63 devices
One (1) internal IEEE 1394 port
(Sharing with first external IEEE 1394 port P2)
Supports various brands of DV camcorders
Supports Windows ® , MAC ® , Linux ®
No driver needed
Connectors
2 x external IEEE 1394a 6-pin connectors
1 x external IEEE 1394a 4-pin connector
1 x internal IEEE 1394a 6-pin connector
System Requirements
Windows ® or MAC ® , or Linux ®
Available PCI slot
Package Contents
Firewire A Add-on PCI Card
Low profile bracket
Manual
Hardware Description
P2: Firewire 400 (4pin)
P1, P3, P4: Firewire 400 (6pin)
P1
P2
P3
P4
Hardware Installation
1. Turn Off the power to your computer.
2. Unplug the power cord and remove your computer’s cover.
3. Remove the slot bracket from an available PCI slot.
4. To install the card, carefully align the card’s bus connector with the selected PCI slot on the motherboard. Push the board down firmly.
5. Replace the slot bracket’s holding screw to secure the card.
6. Replace the computer cover and reconnect the power cord.
Hereby ASSMANN Electronic GmbH, declares that this device is in compliance with the requirements of Directive 2014/30/EU and the Directive 2011/65/EU for RoHS compliance. The complete declaration of conformity can be requested by post under the below mentioned manufacturer address.
Warning:
This device is a class B product. This equipment may cause some radio interference in living environment. In this case, the user can be requested to undertake appropriate measures to prevent interference. www.assmann.com
Assmann Electronic GmbH
Auf dem Schüffel 3
58513 Lüdenscheid
Germany
advertisement
Related manuals
advertisement