Digital Kitchen Scale

Model No.: EK6212-S

Questions or Concerns?

(855) 686-3835 • [email protected]

1

2

Thank You.

Thank you for purchasing the EK6212-S Digital

Kitchen Scale by Etekcity. We are dedicated to providing our customers with quality products for building a better living. Should you have any questions or concerns about using your new product, feel free to reach out to our helpful customer support team at (855) 686-3835 or by email at [email protected]. We hope you enjoy your new product!

Package Contents

1 x Digital Kitchen Scale

1 x Measuring Spoon

2 x 1.5V AAA batteries

1 x User Manual

Table of Contents

Functions

Set-Up 6

7

Weight Measurement 7

Volume Measurement

Tare Function

8

9

9

10

Troubleshooting

Warranty 12

3

4

Safety Information

IMPORTANT:

Please read and comply with all of the instructions and warnings provided in this manual before using the product. Failure to comply with the instructions and warnings provided herein may result in inaccurate results and/or damage to the product itself.

• Always place the scale on a hard, dry, and flat surface before measurement in order to ensure accurate results.

• Dirt, dust, vibration, wind, air currents, and electromagnetic interference may contribute to inaccurate results.

• DO NOT exceed the 11 lb (5 kg) weight capacity; doing so may damage the scale. An overload indicator will appear on the LCD display if the limit is exceeded.

• Avoid exposing the device to damp environments or extreme temperatures.

• DO NOT immerse the scale in water or corrosive liquids. If a liquid is spilled on the digital display or buttons, immediately wipe the scale clean with a soft cloth in order to avoid potential internal damage.

• When replacing batteries, make sure to insert them under the correct polarity as indicated within the battery compartment.

• If the low battery indicator is displayed, please replace the batteries.

• DO NOT mix new and used batteries to power the device.

• This scale is not intended for commercial or heavy-duty use.

• Handle the scale with care. Keep the scale in a cool, dry environment.

• If the scale fails to turn on, check if the batteries are installed correctly. Replace the batteries if necessary.

• If the scale is not in use for an extended period of time, remove the batteries to conserve battery life and extend the lifetime of the scale.

Main Functions

Function Diagram

1. Weighing Platform

2. LCD Display

3. Unit Button

4. Power/Zero Button

5. Anti-skid Padding

6. Battery Compartment

Digital Display

1. Weight Value

2. Tare Mode

3. Zero Weight

4. Negative Weight Value

5. Mode

6. Measurement Unit

Icon Mode

Weight Mode

Milk Volume

Water Volume

1

3

1

2

3

4

5

2 4

5

6

Units Use lb:oz / g Measures the weight of food and solid objects. fl’oz / ml Measures the volume of milk and other liquids with similar densities.

fl’oz / ml Measures the volume of water and other similar liquids.

6

5

6

Set-Up

1. Open the battery compartment on the underside of the scale.

2. Insert the included AAA batteries, making sure they are under the correct polarity. Place the battery cover back on.

3. Press the ‘Power/Zero’ button to turn on the scale.

Unit Conversion

Your new kitchen scale’s default measurement units are metric units (ml, g, kg). To switch the scale to imperial units (lb:oz, fl’oz.), simply press and hold the ‘Unit’ button for 3 seconds.

Press and hold the ‘Unit’ button for 3 seconds.

Operation

Weight Measurement Mode

1. Place the scale on a flat, dry surface.

2. Press ‘Power/Zero’ to turn on the scale. weight.

5. Press and hold ‘Power/Zero’ for 3 seconds to turn off the scale.

3. Press ‘UNIT’ to select your desired measuring unit. Allow the scale to read zero before measuring.

NOTE: The scale with automatically turn off after 2 minutes of inactivity.

4. Gently place your object on the scale. The LCD display will automatically display the object’s

7

8

Volume Measurement Mode

Place the scale on a flat, level surface, then press the power button to turn it on.

1. Press the ‘Unit’ button to select either the milk or water volume measurement mode.

2. The scale will display “0” when ready.

4. Press the ‘Power/Zero’ button to tare the weight of the container.

5. Once the screen displays “0” pour the liquid into the container. The LCD screen will automatically display the final volume.

3. Place an empty container onto the platform. The screen will display the container weight.

NOTE: To reset, remove all weight from the platform and press the ‘Power/Zero’ button.

Tare Function

The tare function allows you to measure objects in a container without having to include the container’s weight in the final measurement.

1. Place the scale on a flat, dry surface.

2. Power on the scale and wait for the display to read zero.

3. Place an empty container on the scale and press

‘Power/Zero.’ The display will now show zero.

5. Take the container off the platform when you have finished weighing your items. Press ‘Power/

Zero’ once to reset the scale.

Maintenance

Use a slightly damp cloth to clean the surface of the scale, followed by a dry soft cloth to wipe away the remaining moisture. You can also use a dry soft cloth to wipe off any dust that may be on the scale.

Be sure not to wash the device or immerse it in water or any other liquids.

4. Place objects in the container, and the display will show weight of the items.

9

10

Specifications

Weight Capacity:

Units:

Division Value:

Auto-Off:

Power:

Dimensions:

11 lb / 5 kg lb:oz / fl’oz. / g / ml

0.1 oz / 1 g

120 seconds

2 x 1.5V AAA batteries

8.5” x 7.3” x 0.6” (217mm x 187mm x 16mm)

Troubleshooting

Problem

LCD display is dim or shows “Lo.”

Device does not turn on.

Cause

Not enough power.

Batteries are no longer good.

Batteries not inserted correctly.

Scale is placed on an uneven surface.

Scale needs to be reset.

Solution

Replace batteries.

Replace batteries.

Insert batteries under the correct polarity as marked on battery compartment.

Place scale on a flat, stable surface.

Remove the batteries, wait 10 seconds, then replace the batteries.

Promptly remove object from scale to protect its sensors. Display shows “Err.”

Weight exceeds 11 lbs (5kg).

Use a different scale with a higher weight range.

Objects exceeding 1000 g are on top of scale before it is turned on.

Remove objects from scale; wait until display reads zero before weighing.

Weight is unstable during measurement.

Keep weight stable on the measuring platform.

11

Warranty

12

Terms & Policy

Etekcity warrants all products to be of the highest quality in material, craftsmanship and service for a minimum of 1 year, effective from the date of purchase. Warranty lengths may vary between product categories. For specific warranty terms, please refer to your product’s listing page or operation manual.

Under the limited warranty, Etekcity will replace or refund any product found to be defective due to manufacturer flaws based on eligibility.

This warranty extends only to personal use and does not extend to any product that has been used for commercial use, rental use, or any other use in which the product is not intended for. There are no warranties other than the warranties expressly set forth with each product.

This warranty is non-transferrable. Etekcity is not responsible in any way for any damages, losses or inconveniences caused by equipment failure or by user negligence, abuse, or use noncompliant with the user manual or any additional safety, use, or warnings included in the product packaging and manual.

Etekcity and its subsidiaries assume no liability for damage caused by the use of the product other than for its intended use or as instructed above and in the user manual. Some states do not allow this exclusion or limitation of incidental or consequential losses so the foregoing disclaimer may not apply to you. This warranty gives you specific legal rights and you may also have other rights which may vary from state to state.

ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE

WARRANTY OF MERCHANTABILITY, ARE LIMITED TO THE PERIOD OF

THE LIMITED WARRANTY.

Should your product prove defective within the specified warranty period, please return the defective unit in its original packaging with

(1) an original copy of the invoice, (2) your order confirmation number,

(3) and your warranty ID number.

Exceptions and Exclusions

• Damage due to abuse, accident, alteration, misuse, tampering or vandalism.

• Improper or inadequate maintenance.

• Damage in return transit.

• Unsupervised use by children under 18 years of age.

Date of Purchase

Place of Purchase

Order Number

Customer Support

Should you encounter any issues or have any questions regarding your new product, feel free to contact our helpful Customer Support Team. Your satisfaction is ours!

Customer Support

Etekcity Corporation

1202 N. Miller St. Suite A

Anaheim, CA 92806

Toll-Free: (855) 686-3835

Fax: (657) 202-1693

Local: (657) 500-1872

Email: [email protected]

Support Hours

Monday - Friday:

9:00 am - 5:00 pm PST

*Please have your order confirmation number ready before contacting customer support.

13

Scan here to join the community!

Visit us at www.etekcity.com

Building on better living.