Hitachi L42X01AU User manual

USER MANUAL
Thank you for purchasing the HITACHI LCD Television.
Please read this user manual carefully before operating
this product.
To ensure proper operation, please read and follow ALL
the instructions, especially the "IMPORTANT SAFETY
INSTRUCTIONS" and "SAFETY PRECAUTIONS".
Please keep this user manual for future reference.
CONTENTS
IMPORTANT SAFETY INSTRUCTIONS ............... 01 TV SETUP OPERATION ....................................... 25
INSTRUCTIONS................................................... 02
About This Manual........................................................... 02
Trademark Credits ........................................................... 02
About Software ................................................................ 02
Features .......................................................................... 02
SAFETY PR
RECAUTIONS ...................................... 03
About the Symbols........................................................... 03
Cleaning and Maintenance .............................................. 06
ABOUT LCD PANEL............................................. 07
How to use the On-Screen Display (OSD) system ..........25
Main Menu List ................................................................26
Setup Menu (TV mode) ...................................................27
Channel Selections..........................................................29
Picture Setting .................................................................30
Audio Setting ...................................................................32
Timer Menu .....................................................................33
Audio Switching (TV) .......................................................34
PC Adjustment Setting ....................................................35
Analog Teletext................................................................37
Other Common Characteristics of LCD Panel ................. 07 DIGITAL TERRESTRIAL TELEVISION (DTT)
OPERATION ......................................................... 39
QUICK START GUIDE.......................................... 08
How to use the On-Screen Display (OSD) system...........39
DTT Main Menu List.........................................................39
1. Supplied Accessories (including option) ...................... 08
Installing Channels...........................................................40
2. Connection .................................................................. 08
Restoring Channels..........................................................40
3. Insert the batteries into the remote control .................. 09
Channel Selections ..........................................................41
4. Removing the Protective Sheet ................................... 09
Making Favorite List .........................................................42
5. Switch On .................................................................... 09
Information Banner...........................................................42
6. Auto Tuning ................................................................. 09
Digital Teletext .................................................................43
Electronic Program Guide (EPG) .....................................43
COMPONENT NAMES.......................................... 10
Subtitle .............................................................................44
Main Unit ......................................................................... 10
Parental Guidance ...........................................................44
Remote Control................................................................ 12
Audio Language (MPEG/Dolby® Digital) .........................44
PREPARATION .................................................... 13
Digital Audio Output .........................................................44
Change Pin ......................................................................45
Remote Control Batteries Installation .............................. 13
Local Time .......................................................................45
Handling the Remote Control .......................................... 13
Checking DTT System Information ..................................45
Caution When Moving the Main Unit ............................... 13
Jump to TV Setup Menu ..................................................45
Safety Precaution on Main Unit Installation ..................... 14
Anti-Tumble Measures..................................................... 14
FUNCTION ........................................................... 46
CONNECTION...................................................... 15
Size Switching .................................................................46
Terminal Positions ........................................................... 15
Multi Picture Mode ...........................................................47
Connecting Procedure ..................................................... 15
Picture Freezing...............................................................50
Power Save Mode............................................................50
BASIC OPERATION ............................................. 22
DVD Player/ STB Selection .............................................51
POWER On/Off................................................................ 22
Volume UP/DOWN .......................................................... 23 TROUBLESHOOTING ........................................... 52
Mute................................................................................. 23
When Following Messages Appear on the Screen ..........52
Input Switching to DTT/TVʿʳAV1~4, HDMI1~3, and RGB 23
Symptom and Check List.................................................52
Input Signal Screen Display............................................. 24
PRODUCT SPECIFICATIONS ............................... 55
Signal Input......................................................................56
Recommended Signal List ...............................................57
IMPORTANT SAFETY INSTRUCTIONS
Ⴠ Read this instruction thoroughly.
Ⴠ Retain this instruction for future reference.
Ⴠ Heed all warnings and cautions to prevent possible danger.
Ⴠ Follow all instructions. Improper handling could cause personal injury and/or serious damage to the unit that may shorten its
service time.
Ⴠ Do not block any ventilation openings.
Ⴠ Install the product in accordance with the manufacture’s instructions.
Ⴠ Before calling for the technical support or service technician, read “TROUBLESHOOTING” ( 52 ~ 54 ) to determine the
symptoms when problems occur during installation or operation of the product.
Ⴠ If serious problems happen (such as smoke or an abnormal odor from the unit), turn off the Main Power, unplug the Power Cord,
and then, contact your local dealer immediately.
1
INSTRUCTIONS
Thank you for purchasing the HITACHI LCD Television. We hope that you will enjoy the great performance with this product.
This LCD Television has been designed to meet the International standards. However, it could cause personal injuries
and property damage if improperly handled. In order to prevent potential danger and obtain maximum benefit from your
set, please observe the following instructions when installing, operating, and cleaning the product.
Keep this manual for future reference, and record the serial number of your set in the space provided on the front cover
page of this manual.
About This Manual
Ⴠ The
information in this manual is subject to change without notice.
manual has been created with extra care. In case that you have any comments or questions regarding this manual,
please contact your local dealer or our Customer Service Center.
Ⴠ Before operating this set, please fully understand the prerequisite such as specifications or constraints of the
hardware and software. We are not responsible and have no liability for any loss, damage or injury as a result of
misuse.
Ⴠ Reproduction, copying, use, modification, and/or transmission in whole or in part of this manual are prohibited without any
prior written permissionˁ
Ⴠ All other products and company names used in this manual are trademarks or registered trademarks of their respective
owners.
Ⴠ This
Tra
a demar k Credits
Ⴠ VGA and
XGA are trademarks of International Business Machines Corporation.
a registered trademark of the Video Electronics Standard Association.
Ⴠ HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI
Licensing LLC.
Ⴠ DVB is registered trademark of the DVB Project.
Ⴠ Manufactured under license from Dolby Laboratories.
“Dolby” and the double-D symbol are trademarks of Dolby Laboratories.
Ⴠ VESA is
Even if no special notation has been made of company or product trademarks, these trademarks have been fully respected.
About Software
You may not alter, decompile, disassemble, decrypt, or otherwise reverse- engineer the Software installed in this
product, which are prohibited by law.
Features
Ⴠ Large-screen
and high-definition LCD panel.
high resolution display with 1920 (H) x 1080 (V) pixels.
Ⴠ Improved Digital signal processor.
Ⴠ High quality sound with deeper, richer and dynamic bass tones.
Ⴠ Accept more digital input devices with 3 HDMI terminals.
Ⴠ Great diversity of connecting terminals to cover wide range of audio-visual equipment.
Ⴠ Enjoy the image from PC with large, high-definition LCD screen.
Ⴠ Easy-to-use On-Screen Display system operating with remote control.
Ⴠ Low power consumption with power saving feature.
Ⴠ Swivel feature.(Desktop stand is optional for L42X01AU )
Ⴠ Enjoy
2
SAFETY PR
RECAUTIONS
For your safety, please read the following precautions carefully before using this product. Improper use would cause serious personal
injuries and/or damage to your property or this product.
About the Symbols
The following are the symbols used in this manual and affixed on the unit itself. Please fully understand the meanings of the symbols
before reading the precautions in this section.
WARNING
Never ignore the instruction. There are risks of serious injuries or possible death to the user.
CAUTION
Do not ignore the instruction. There are possibilities of personal injuries and/or property damage.
Other Symbols
The triangle with illustration is intended to alert the users that there are possibilities of fire, explosion, or high
temperature if the product is handled improperly.
Each illustration within the triangle specifies the contents in detail. (The figure on the left is an example.)
The circle with diagonal line and illustration indicates a prohibited action. (the symbol at the left indicates that
disassembly is prohibited.)
This symbol indicates a compulsory action.
The contents will be clearly indicated in an illustration or nearby. (the symbol at the left indicates that the power
plug should be disconnected from the power outlet).
WARNING
There is a risk of fire, electric shock, or serious injury.
„ Unplug the power cord immediately when serious problems occur.
Serious problems such as
Ⴠ Smoke, abnormal odor or sound comes out from the product.
Ⴠ No picture, no sound or distorted picture on the display.
Ⴠ Foreign objects (such as water, metals etc) get inside the unit.
Do not continue using the product under these abnormal conditions.
Disconnect the
plug from the
power outlet.
Unplug the power cord, and contact your dealer immediately.
For your safety, never try to repair the product by yourself.
„ Do not insert liquids or any foreign objects (such as metals or flammable items) inside the unit.
Ⴠ In case it happens, unplug the power cord, and contact your dealer immediately.
Ⴠ Use special caution when younger children are around the unit.
„ Do not remove cover, or modify the product.
Ⴠ High-voltage components are installed inside of the unit. Removing covers can expose you to
high voltage, electrical shock, and other dangerous conditions.
Ⴠ Contact your local dealer to perform servicing such as inspection, adjustment, or repair work.
3
Do not
disassemble.
SAFETY PRECAUTIONS (continued)
WARNING
There is a risk of fire, electric shock, or serious injury.
„ Install the unit at a proper area where it does not expose anyone to any danger.
Ⴠ If you hit against the edge of the unit, you may be injured.
„ Do not place any objects on top of the unit.
Objects such as
Ⴠ Liquid containers (vase, fish tank, flowerpot, cosmetics or liquid medicine).
Ⴠ If water or any liquid spill onto the unit, it may cause short-circuit and result in fire or electrical shock.
Ⴠ In case that it happens, unplug the power cord, and contact your dealer immediately.
Ⴠ Do not place anything heavy on top of the unit.
Ⴠ Do not climb on or hang from the unit.
Ⴠ Do not let your pets get on top of the unit.
„ Do not install the unit in an unsuitable place.
Ⴠ It could cause a malfunction or in extreme cases danger of electric shock. Places where high
moisture is likely such as bathrooms or shower rooms, close to windows, or outside where rain,
snow or other inclement conditions could occur should be avoided. Please also avoid installing
the unit in a position where fumes from a Hot Spring could come into contact with it.
„ Unplug this unit during lightning storm.
Ⴠ To reduce the risk of electrical shock, do not touch the product when starts lightning.
Disconnect the
plug from the
power outlet.
„ Do not do anything that may damage the power cord.
Ⴠ Do not damage, modify, twist, forcibly bend, heat, or pull excessively the power cord.
Ⴠ Do not place heavy objects (including the unit itself) on top of the power cord.
Ⴠ If the power cord is damaged, contact your dealer for repairs or exchange.
„ Use only with designated power supply voltage.
Ⴠ To prevent the risk of fire and electrical shock, operate this product only with the power supply voltage
indicated on the unit.
„ Beware not to drop or have any impact on the unit.
Ⴠ Take extra care while moving the unit.
Ⴠ The LCD panel is made of glass. In case that it breaks, you may be injured by the broken pieces.
Ⴠ In case that you drop the unit or the cabinet is damaged, turn off the Main Power, unplug the power cord and
contact your local dealer immediately.
Ⴠ Continuing use of the product with above conditions may cause fire or electrical shock.
„ Clean dust or metals on or around the blade of the power plug regularly.
Ⴠ Continuing use of the product with above condition may cause fire or electrical shock.
Ⴠ Always unplug the power cord first, and clean the blade with dry cloth.
„ Do not place the unit on an unstable surface.
Unstable places such as
Ⴠ Tilted place or shaky rack, table, stand or trolley.
Ⴠ If the unit falls down, it could cause personal injury.
4
SAFETY PRECAUTIONS (continued)
CAUTION
„ Do not cover or block any ventilation holes on the product.
The unit would overheat, and it could cause fire or damage the product which may shorten its service life.
Ɣ Install the product in accordance with the instructions in this manual.
Ɣ Do not place the unit with ventilation side down.
Ɣ Do not install the unit on the carpet or bedclothes.
Ɣ Do not cover the television with table cloth etc.
„ Be sure to ground the earth cable correctly.
Ɣ Especially when you use power cord adapter, be sure to connect the earth cable to the ground terminal.
Incorrect connection would cause fire or electrical shock.
Ɣ For your safety, always make sure to unplug the power cord before connect or disconnect the earth cable.
„ Follow the Anti-tumble measures in this manual.
Ɣ If the television tumbles over, there is a risk of personal injury and possible death. Also, it would damage the
product seriously.
„ Do not install the unit near the medical devices.
Ɣ To prevent malfunction of the medical devices, do not use this product and the medical devices in the same
room.
„ Do not place a CRT-based television near the speakers of the LCD Television.
Ɣ It could cause the partial discoloration or blurring of the image on the CRT-based television.
„ Disconnect all of the external connection cables and detach the anti-tumble measures
before moving the unit.
Ɣ It may cause fire, electrical shock, or personal injuries.
„ Connect the power plug securely.
Ɣ Improper connection will cause overheating and may result in fire.
Ɣ Do not touch the blades of the plug while connecting it to the wall socket. It could cause electrical shock.
Ɣ If the plug is not fitted for the wall socket, contact your dearly for replacement.
„ Do not handle the power cord with wet hands.
Ɣ It could result in electrical shock.
„ Do not pull the cord when you unplug the power cord.
Ɣ It may damage the cord and could result in fire or electrical shock.
Ɣ Hold the plug when disconnecting it.
„ Unplug the power cord when you do not intend to use the product for long periods of time.
„ Handle the batteries properly.
Ɣ Improper or incorrect use of the batteries may cause corrosion or battery leakage, which could cause fire,
personal injury or damage to the property.
Ɣ Use only the types of the batteries which are indicated in this manual.
Ɣ Do not install new batteries with used ones.
Ɣ Install the batteries correctly by following the polarity (+ and -) indications on the battery compartment.
Ɣ Do not dispose the used batteries as domestic waste. Dispose them in accordance with the local regulations.
„ Adjust the headphone volume properly.
Ɣ Excessive sound pressure from headphones might cause hearing loss.
5
Supply connect
the ground wire.
SAFETY PRECAUTIONS (continued)
PRECAUTIONS
„ Do not install the unit at areas where it will be subjected to high temperatures.
It could damage the cabinet or parts of the product.
Ɣ Do not install near any heat sources such as radiator, heat registers, stoves, or other apparatus that produce heat.
Ɣ Keep the unit out of direct sunlight. It could increase the temperature of the unit and cause malfunction.
„ Viewing Advice
Ɣ The lighting of the environment in which the product is used should be appropriate. Too bright / dark environments are not good
for your eyes.
Ɣ Take time to relax your eyes occasionally.
Ɣ When you use this product, view from a distance equal to 3 to 7 times the height of the screen. This is the best viewing distance
in order to protect your eyes against eyestrain.
Ɣ Adjust the volume in appropriate level, especially during the night.
„ When transporting this product
Ɣ When the product needs to be transported due to moving or repair, use the carton box and buffer material that
come with this product.
Ɣ Do not transport this product on its side. It could damage the panel glass or degrade the phosphors of the panel.
„ Keep radio away from the unit while in use.
The unit is designed to meet the international EMI standards due to prevent radio interference. However, the unit
may generate noise in the radio.
Ɣ If the noise is heard on the radio, please try the following actions.
Adjust the direction of the radio antenna in order not to receive the interference from the unit.
Keep the radio away from the unit.
Use coaxial cable for the antenna.
„ About the infrared communication devices
Ɣ The infrared communication devices such as cordless microphone or cordless headphone may not operate properly around
the unit. It is because of the communication failure. Please note that this is not malfunction.
„ When you dispose this product at the end of its life, follow the regulations in your residential area.
Ɣ For more information, contact the local authority or the dealer where you purchased the product.
Cleaning and Maintenance
Please make sure to unplug the power cord before cleaning the unit.
„ How to clean the LCD panel of the unit.
Ɣ The panel surface is specially- coated to reduce the reflection and cut infrared radiation; thus, wipe the panel with a lint-free
and dry cloth in order to prevent damage to the coating.
Ɣ Do not use a chemical cloth or cleaner. Depending on the ingredients, it may cause discoloration and damage on the coating.
Ɣ Do not wipe with a hard cloth or rub hard. It may damage the coating.
Ɣ In case of the greasy dirt such as fingerprint, wipe with a lint-free cloth moistened by a diluted neutral detergent solution, and
then wipe with a soft and dry cloth.
Ɣ Do not use a spray cleaner. It could remove the coating or cause malfunction by entering inside of the unit.
„ How to clean the Bezel (glossy surface).
Ɣ Even a small blemish on the glossy surface easily stands out. Do not use gloss cleaning products other than the one included
in the package. (To prevent change of color, please do not use detergent to clean the glossy surface). To clean away dust,
gently wipe it with the special raised surface (the surface with characters) of the gloss included in the package. To clean
fingerprints and grease, gently wipe the surface with the plain surface (surface without the characters) of the same gloss.
Ɣ Excess pressure while wiping may damage the surface even if it is done with the included gloss. Thus, please be careful when
cleaning the surface. To prevent damaging the surface due to dust attached on the included gloss, please remember to wash it
after use. (Please do not use fabric softener or bleaching agents).
„ How to clean the cabinet of the unit.
Ɣ The following may cause crack, deformation, and paint peeling.
Do not wipe the cabinet with benzene, thinner, and other chemical products.
Do not spray volatile solutions such as insecticide over the cabinet.
Do not leave the cabinet in prolonged contact with plastic or rubber materials.
Ɣ Do not use a chemical cloth, cleaner or wax. Depending on the ingredients, it may cause crack and deformation.
Ɣ Use a lint-free cloth to clean the cabinet and control panel of the unit. In case of the heavy dirt, wipe with a soft cloth moistened
by a diluted neutral detergent solution, and then wipe with a soft and dry cloth.
Ɣ Never use the following detergents. It could cause crack, discoloration, and scratch.
Acid/ alkaline detergent, alcoholic detergent, abrasive cleaner, powder soap, OA cleaner, car wax, glass cleaner, etc.
6
ABOUT LCD PANEL
Other Common Characteristics of LCD Panel
The following are the common phenomena when operating LCD Panel due to its structural reason. Please
note that they are not malfunctions.
ŏ
Defective Spots on Panel
The LCD panel is manufactured with high-precision technology. However, there might be some spots that
are not emitted, brighter than the others, or in different colors, etc.
ŏ
Surface on Panel
The LCD panel displays images by blinking the fluorescent lamps internally. This could raise the temperature
of the display surface.
In addition, do not impact strongly on the surface of the panel because LCD panel is made with fine
processing glass.
ŏ
Residual image
When a still image or menu is displayed on the screen for a short time (about a minute) and then switches
to another image, it may leave an “after-image” on the screen.
The residual image will disappear on its own.
ŏ The Usage under the Low Temperature Environment
Because of the structural characteristics of the LCD panel, the response speed of the LCD panel becomes
slower when the ambient temperature around the television becomes too low. In some cases, it may cause
the residual image.
The residual image will disappear on its own as the temperature goes up and back to normal.
7
QUICK START GUIDE
For more information on connecting and using your TV, please be sure to read all instructions in this user manual.
1. Supplied Accessories (including option)
User Manual
Remote Control
AA size batteries
X2
Power Cord
Clean Cloth
Option:
Desktop Stand
(TS01C42SL)
For L42X01AU
* See the user
manual of
desktop stand
about the
installation.
*The type of power plug provided may be different from this drawing for some countries.
2.Connection
15 ~ 21
཰ Connect the power cord to the rear panel.
L37X01AU
L42X01AU
ཱ Connect to the aerial lead and external equipment.
Example: Connecting aerial lead through DVD/STB.
(example:L42X01AU)
ི Connect the plug into the wall socket after all
other connections are completed.
CAUTION
Ɣ Ensure that both ends of power cord are easily
accessible.
8
QUICK START GUIDE (continued)
3. Insert the batteries into the
remote control… 13
The protective sheet
4. Removing the Protective Sheet
Before using the TV, remove the protective sheet
from the cabinet.
5. Switch On…
22
Sub Power button
Press either Power On/ Off switch on
the unit or Power On/ Off button on the
remote control.
Ɣ The color of the indicating lamp turns
from Red to Green.
6. Auto Tuning …
27
and
Main Power
switch
(L37X01AU)
Main Power
switch
(L42X01AU)
40
When you turn ON the TV for the first time, a message show up to lead to
the DTT channel installation.
Database is Empty
DTT
Press MENU for Installation
཰ The message “Database is Empty Press MENU for installation”
appears.
ཱ Press
button to access DTT main menu.
TV Setup
ི Select “Installation” form DTT main menu and press
Password Edit channels
button.
ཱི The password box will appear as””, and enter “0000” as your initial
Parental guidance
Installation
General settings
System
password.
ུ Select one of the scanning methods from “Manual scan”,” Quick
scan”, or “Auto scan.”
< DTT Main Menu >
TV
Picture
Audio
Timer
Setup
Then, go to with TV channel installation.
཰ Press
button to access TV Main Menu.
Select
ཱ Select “Setup” from Main Menu.
ི Select “Auto scan.” From “Setup” menu and press
button.
ཱི Select “Search” to turn the local channels automatically.
NOTE
Ɣ If you want to change the setting after completing this first time setup, press
button and set up individually. Refer to
26
,
27
and
28
<TV Main Menu>
Setup
Auto Tuning
Manual Tuning
Fine Tuning
Sort
Teletext Language
Select
9
OK Set
OK Set
Return
COMPONENT NAMES
Main Unit
Front Panel
Cabinet
Panel
Remote Control Receiver
Indicating Lamp
Speaker
Desktop Stand (Option for L42X01AU)
Main Power Switch (on the left side)
– for L37X01AU
Main Power Switch (on the right side)
– for L42X01AU
L42X01AU
L37X01AU
ཱ
཰
7
8
5
6
3
4
Rear Panel
L37X01AU
L42X01AU
཰
ི
ཱ
཰
Side Input
Power Cord Socket
Terminal Board (External Device Connection)
Control Panel (see below for details)
Please refer to 15 ~ 21 for the detailed information for the connections.
10
COMPONENT NAMES (continued)
Main Unit (continued)
Control Panel
L37X01AU
L42X01AU
Sub Power button
Menu button
Channel Up/ S button
Channel Down/ T button
Volume Up
Volume Down
/f button
/ebutton
Input Select /OK button
11
COMPONENT NAMES (continued)
Remote Control
Sub Power
Press this button to switch TV On or Off standby.
Device Select (TV/DVD/STB)
Press these buttons to select the device (TV, DVD or STB) to be
controlled by this remote control.
The selected button will light up to display the selected mode.Normally,
select “TV”.
Program Select [Page Select]
Press these buttons to select a TV program directly. Refer to 29 for
details.
Freeze [Hold]
Press this button to change the picture to freeze mode.
Press it again to return to normal picture. (Also, it holds the page in
teletext mode.)
CHI/II
This is exclusively for TV audio A2/NICAM mode.
Also,press this button to select Audio Language in DTT mode.
Volume Up/Down
[Color]
TV/Text [TV
Text]
This switches between the TV mode and the Teletext mode.
Time [Cancel]
Press this button to display the time when receiving an analog TV
program. The time is not displayed if the recevied signal does not have
any time information.
Menu [Back Light]
Cursor
OK
Off Timer
This automatically sets the power to standby mode when the selected
time period has elapsed. (0ĺ30ĺ60ĺ90ĺ120min.)
Input Select/DVD Control
Press these buttons to change input mode. In addition, you can use
these buttons while operating the selected brand of DVD player.
Program List
It displays program list in DTT mode.
Favorite List
It displays favorite list in DTT mode.
Recall
Press this button shows the input signal status.
Picture Mode
Picture mode can be changed each time pressed in the following
sequence. DynamicĺNaturalĺCinema
Sound Mode
Sound mode can be changed each time pressed in the following
sequence. MovieĺMusicĺSpeechĺFavorite.
DTT/TV
Press this button to select DTT (Digital Terrestrial TV) mode or TV
mode.
Multi Picture
Press this button to change the picture to multi-picture mode. Press it
again to return to normal picture.
Channel Up/Down[Page select]
Mute
[Reveal]
[Subtitle]
Guide [Index]
It displays EPG screen in DTT mode
Return
You can use this to return to the previous menu.
Not Available
Picture Size [Zoom]
Press this button to change picture size.
NOTE
Some buttons are only for Teletext mode, and other buttons have different functions in Teletext mode from the use of TV
mode. Those buttons are indicated by [ ]. Refer to "Analog Teletext" on 37 ~ 38 .
12
PREPARATION
Remote Control Batteries Installation
Handling the Remote Control
Use the remote control within about 5m from front
of the unit’s remote-control sensor and within 30
degrees on both sides.
This remote control operates on 2 “AA” batteries.
1. Open the battery compartment cover
Ɣ Slide open the battery compartment
cover on the backside in the direction of
an arrow, and remove the cover.
2. Installing the batteries
Ɣ Install 2 “AA” batteries (included) making
sure the polarities match the indication
inside the compartment.
Holes
Within 30 degrees
About 3m
Projecting parts
Within 30 degrees
About 3m
About 5m
3. Close the battery compartment cover
Ɣ Make sure of the positions to fit the
projecting parts in the holes, and slide
the compartment cover in the direction
of an arrow till it clicks shut.
CAUTION
It could cause corrosion or battery leakage and may result in physical injury and/or
property damage including fire.
Ⴠ Never mix used and new batteries in the device.
Ⴠ Replace all the batteries in a device at the same time.
Ⴠ Remove the batteries if the remote control is not going to be used for an extended period of time.
To avoid possible failure, read the following instructions and handle the remote control
properly.
Ɣ Do not drop or have an impact on the remote control.
Ɣ Do not spill water or any liquid on the remote control.
Ɣ Do not place the remote control on the wet object.
Ɣ Do not place the remote control under the direct sunlight or near sources of excessive heat.
Caution When Moving the Main Unit
As this product is heavy, whenever it is moved, two people are required to transport it safely.
When moving the unit, hold it by the top and bottom frame of the LCD screen. (See the figures below for details.)
L37X01AU
13
L42X01AU
Hand grips
PREPARATION (continued)
Safety Precaution on Main Unit Installation
Read SAFETY PRECAUTIONS (
3
to
6
) carefully besides this page.
* When installing the unit, use the optional Desktop Stand (TS01C42SL for L42X01AU). Please refer to the user manual of
the stand.
The Desktop Stand (optional) has been used for the illustration in this manual.
When installing the main unit, be sure to use the specified mount units in order to obtain maximum performance and
maintain the safety.
We assume no responsibility or liability for personal injuries or property damages caused by use of other mount units or
improper installation.
As for the installation instruction, please read each user manual of the mount units: for Desktop Setup, Wall Mounting, and
Ceiling Mounting.
In case of using Wall or Ceiling Mounting unit, contac your local dealer, ask the specified installation specialist to set up.
Never attempt to install it by yourself. It could cause injuries or damages
Please leave adequate space around this television
in order to avoid increasing the internal temperature.
10cm
or more
10cm or more
10cm
or more
30cm
or more
Clamp
Make sure not to block any ventilation holes.
Do not install the television in the small space such
as inside the rack, closet or the box.
Cord
or
Chain
Leave more than 10cm of clearance from each side
of television and 30cm from the top of television to
wall.
Without Swivel function: Leave at least 10cm of
clearance behind rear unit.
With Swivel function: Leave at least 35cm of
clearance to obtain the maximum performance of
Swivel Function.
Anti-Tumble Measures
Install in a stable place and implement safety measure against overturning.
Securing to a wall or pillar
Using a commercially available cord, chain and clamp.
Secure the set to a firm wall or pillar.
Hook
Cord or
Chain
Screw
Clamp
Wall or Pillar
Cord
or
Chain
Securing to ceiling
Using a commercially available cord, chain, and clamp secure the set to a ceiling.
NOTE
Ɣ For more information regarding the mounting of the unit, please contact your dealer.
Ɣ Please install the unit at a proper area where it does not expose anyone to the danger of hitting themselves (for example
their hands, head or face, etc) against the edge of the unit and cause personal injury.
14
CONNECTION
Terminal Positions
L37X01AU
Rear
Power Cord Socket
Aerial Socket
AV1
Service Use Only
AV2
AV3
Monitor Out
PC(RGB)/HDMI Analog Audio Input
PC Connection Terminal (D-Sub 15
pin)
HDMI 1 and HDMI 2
Optical Out (Digital Audio)
Side
HDMI 3
Headphone Terminal
AV4
L42X01AU
Rear
Power Cord Socket
Aerial Socket
AV1
Service Use Only
AV2
AV3
Monitor Out
PC(RGB)/HDMI Analog Audio Input
PC Connection Terminal (D-Sub 15
pin)
HDMI 1 and HDMI 2
Optical Out (Digital Audio)
Side
HDMI 3
Headphone Terminal
AV4
Connecting Procedure
This unit is ready for various kinds of connections. Make a connection in the following steps. Be sure to unplug the power
cord from the wall socket first, when connecting external equipment.
1. Connect Power Cord to the rear panel.
2. Connect Aerial Lead.
3. Connect your external equipment (if any) to the unit.
4. Connect the power plug to the wall socket.
15
CONNECTION (continued)
Connecting Procedure (continued)
1. Connecting Power Cord to Rear Panel.
Connect power cord to the television.
* Make sure not to connect the power plug to the wall socket
until all connections are completed.
2. Connecting Aerial Lead.
There are two ways to connect aerial lead.
When you do not have any other external equipment
Connect the aerial lead directly into the socket at rear
panel.
When you have one or more external devices to
connect:
1. Use RF cable to connect between each equipment and
aerial.
2. Connect the Aerial Lead to an equipment ”In” socket
marked
3. Connect the RF cable from the equipment “Out” to the
other equipment “In”.
4. Then, connect from the equipment ”Out” to “ANT” on the
LCD screen socket.
STB
VCR
[Example: Connecting Antenna through STB
and VCR.]
Precautions when connecting the aerial
Ɣ Please use a coaxial cable which is free from interference to connect the aerial. Avoid using a parallel flat feeder
wire as interference may occur, causing reception to be unstable and stripe noise to appear on the screen.
Ɣ Avoid using indoor aerial as this may be affected by interference. Please use CATV net or outdoor aerial.
Ɣ For safety, install an external aerial conforming to AS1417.1( Applicable for Australia only)
Ɣ If there are noise in the picture of VHF-Low band channel, please use the double-shielded cable (not provided) for
RF LEADS to reduce the noise.
16
CONNECTION (continued)
Connecting Procedure (continued)
3. Connecting to External Equipment
Ɣ Terminals on Rear
AV1 and AV2 can be connected to the equipment with Component output.
IN
OUT
VCR
DVD player/recorder
[Example]
Set-Top Box
If your external device has a Component terminal, COMPONENT / AUDIO connection is recommended for higher quality
picture.
AV3 can be connected to the equipment with S-Video output and Composite output.
IN
OUT
VCR
DVD player/recorder
[Example]
Set-Top Box
If your external device has a S-Video terminal, S-Video connection is recommended for higher quality picture.
NOTE
Ɣ If both S-video and Composite Video input terminals of AV3 are connected at the same time, S-Video will have its priority.
17
CONNECTION (continued)
Connecting Procedure (continued)
Monitor Out can be used to display same image and sound as main unit on another television.
When this output terminal is connected to an external television with a 75 Ohm terminal, the same image and sound from
composite (AV3, AV4), or DTT/TV signal can be displayed to the external television.
OUT
IN
[Example]
Monitor
NOTE
Ɣ Video output is not available from component, RGB, or HDMI input.
PC connection terminal (D-sub 15 pin) +PC(RGB)/HDMI Analog Audio Input terminal connected to PC, which allows
Analog RGB signal.
L37X01AU
L42X01AU
Mini
stereo
plug
Mini stereo plug
[Example]
IN
IN
[Example]
or
or
OUT
OUT
18
CONNECTION (continued)
Connecting Procedure (continued)
HDMI1~ 3 terminals can be connected to the devices with HDMI output .
If the external device has DVI output, this can be available with HDMI-DVI cable. In case of using the HDMI-DVI cable,
connect analog audio signal to PC (RGB)/HDMI Analog Audio Input terminal.
HDMI 1· 2 terminals are located on the rear side of unit, while HDMI 3 terminal is located on the right side control panel.
See 15
L37X01AU
IN
Mini
stereo
plug
L42X01AU
IN
OUT
[Example]
HDMI
OUT
Mini stereo plug [Example]
VCR
HDMI
DVI
VCR
or
DVD player/
recorder
HDMI
Set-Top Box
or
DVD player/
recorder
HDMI
DVI
Set-Top Box
Information
HDMI (High Definition Multimedia Interface) is next-generation multimedia I/O interface. Only one cable is used to transmit
all video/audio/control signals, which creates easy connection.
Moreover, those digital signals can produce high quality data without any degradation.
You are provided with three HDMI terminals, one of the most remarkable features.
If your external device has a HDMI terminal, HDMI connection is recommended for higher quality picture and sound.
NOTE
Ⴠ About PC (RGB)/HDMI analog audio input terminal
This terminal can be used in one of the following cases only.
཰ The external device is connected to the PC (RGB) terminal of the TV.
ཱ 7KH DVI output of an external device is connected to the HDMI 1 terminal using the HDMI-DVI cable. ི The DVI output of an external device is connected to the HDMI 2 terminal using the HDMI-DVI cable.
ཱི 7KH DVI output of an external device is connected to the HDMI 3 terminal using the HDMI-DVI cable.
L37X01AU
HDMI 1 Terminal
HDMI Analog Audio Input Terminal
HDMI 2 Terminal
PC (RGB)Terminal
L42X01AU
HDMI 1 Terminal
HDMI 2 Terminal
PC (RGB)Terminal
Make sure that the video and audio terminals are connected to the same external device.
About the output format of an external device, refer to “Recommended Signal List” on 57
58
Optical Out (Digital Audio) terminal can be connected to an audio amplifier with Optical Audio input.
OUT
IN
[Example]
Stereo System Amplifier
NOTE
Ⴠ This output is DTT output but not monitor output.
19
CONNECTION (continued)
Connecting Procedure (continued)
Ɣ Terminals on Side
Since the following terminals are located on the side, it is very convenient to use the extra device on a temporary basis after
done the connections on the rear panel.
AV4 can be connected to the equipment with composite output. (For L37X01AU)
AV4 can be connected to the equipment with S-Video output and composite output. (For L42X01AU)
[Example]
VCR
L37X01AU
[Example]
VCR
L42X01AU
Camcorder
Camcorder
IN
IN
OUT
OUT
DVD player/recorder
DVD player/recorder
AV4
AV4
Home video game system
Home video game system
If your external device has an S-Video terminal, S-Video connection is recommended for higher quality picture.
NOTE
Ⴠ If both S-video and Video input terminals of AV4 are connected at the same time, S-Video will have its priority.
(For L42X01AU)
Headphone
L37X01AU
L42X01AU
(Mini Stereo Plug)
(Mini Stereo Plug)
The audio from the speaker will be muted when connecting the headphone to this terminal.
20
CONNECTION (continued)
Connecting Procedure (continued)
4. Connecting the plug into the wall socket
Connect the power cord after completing all other connections.
(The type of plug is different from this drawing for some countries.)
CAUTION
Ɣ Use only the power cord provided.
Ɣ Do not use a power supply voltage other than that indicated (AC110-240V, 50/60Hz). It may cause fire or electric
shock.
Ɣ For the LCD panel, a three-core power cord with a ground terminal is used for efficiency protection. Always be sure to
connect the power cord to a three-pronged grounded outlet and make sure that the cord is properly grounded. If you
use a power source converter plug, use an outlet with a ground terminal and screw down the ground line.
Ɣ Ensure that both ends of power cord are easily accessible.
Ɣ If you have to change the power cord, please use the certified power cord that meets your region’s safety standard.
Information
z How to secure the power cord and cables
Step 1. Secure the power cord
After connecting power cord to the rear panel, secure the power cord with the clamp.
L37X01AU
L42X01AU
Clamp for power cord
Step 2. Secure all cables
Secure all cables together with power cord by using large clamp.
L42X01AU
L37X01AU
Large clamp
NOTE
Ⴠ When you secure the cables, please be careful not to tighten too much.
21
BASIC OPERATION
POWER On/Off
Now, turn On the main power of the unit.
Ⴠ To turn On the power of the television
L37X01AU
(on the left side)
L42X01AU
(on the right side)
1. Press the Main Power switch on the television.
Ⴠ The Indicating Lamp will illuminate in Red
(Standby mode).
Main Power switch
2. Press either Sub Power button on the control panel or
Sub Power button on the remote control.
Ⴠ The color of the Indicating Lamp turns into
Green, and the image will display on the screen.
Main Power switch
Ⴠ To turn Off the power of the television
1. Press either Sub Power button on the control panel or
Sub Power button on the remote control.
Ⴠ The image disappears from the screen and the
Indicating Lamp turns into Red (Standby mode).
2. Press Main Power switch to completely turn Off
the power of the unit.
L37X01AU
Indicating Lamp
Sub Power button
L42X01AU
Sub Power button
Sub Power button
The Indicating Lamp Status
Indicating Lamp Status
Power Status
Off
Off
Red
Standby mode
Green
On
Orange
Power Save mode
Power Switch Status
Main power
Off
Main power
On
Sub Power button
Off
Main power
On
Sub Power button On
Main power
On
Sub Power button
On
NOTE
Ⴠ If the image does not appear on the screen at all, or have any problem, see TROUBLESHOOTING on 52 ~ 54 . It
may help you to solve the problems.
Ⴠ You can turn ON the power only by pressing the Sub Power button during the Standby mode.
Ⴠ Do not switch the power On/Off repeatedly in a short period of time. It could cause malfunction.
Ⴠ To avoid sudden surges of electricity when the power comes back on, unplug the power cord before you leave if there
is a power cut during use of the unit.
22
BASIC OPERATION (continued)
Volume UP/DOWN
1. To increase the sound volume, press
button on the
remote control, or Volume Up button on the control panel.
Ɣ The Volume Indicator value on the screen will shift right.
2. To decrease the sound volume, press
button on the
remote control or Volume Down button on the control panel.
Ɣ The Volume Indicator value on the screen will shift left.
Volume
Mute button
Up/Down button
Mute
1. To mute the sound, press
button on the remote control.
Ɣ The sound of the unit is temporarily turned Off.
Ɣ The color of the Volume indicator will turn into magenta while muting the
volume.
Mute
2. To turn the sound back, press
button again, or Volume Up button on either
remote control or the control panel.
Ⴠ The color of the Volume Indicator will turn back to yellow.
26
The Volume Indicator
NOTE
Ⴠ You can decrease the volume by pressing
button while the sound is
muted.
L42X01AU
L37X01AU
Volume Up / Down button
Channel Up / Down
Input Select
Volume Up / Down button
Channel Up / Down
Input Select
Input Switching to DTT/TVʿʳAV1~4, HDMI1~3, and RGB
By pressing Input Select button, you can switch the input.
DTT/TV button
Ⴠ To watch actual broadcast, press Input Select button on the
control panel, the numeric buttons, DTT/TV button or Channel Up / Down button
on the remote control.
Ⴠ To display the image outputting from the external equipment connected to each
terminal ( DTT/TV, AV1~4, HDMI1~3 and RGB), select corresponding mode.
1. Press Input Select buttons on the remote control.
(Use “
” button to switch between DTT and TV mode.)
Channel Up/Down
buttons
2. The Input modes can be also switched by using Input Select button on the control panel.
Each time this button is pressed, the screen displays corresponding mode by following
order.
DTT
RGB
TV
AV1
HDMI 3
AV2
HDMI 2
AV3
AV4
HDMI 1
Input Select
buttons
3. To go to TV mode, press Channel Up/Down buttons on remote control or DTT/TV button on the control panel.
Also, you can use the numeric buttons on the remote control.
23
BASIC OPERATION (continued)
Input Signal Screen Display
Recall
button
The input signal status and off timer staturs can be displayed on the screen by
pressing the
button of the remote control.
• The display in DTT mode will appear when changing the channels.
(Refer to 41 , 42 )
• The display will go out in approximately 5 seconds.
DTT
Program name
Channel number
Broadcasting time
Signal Type
06-0072
Rating
Channel name
SD
Now
-----
C
--:--
--:---:--
Start time
End time
ABCDE
Program progress indicator
TV
1
ABCDE
ź
Off-timer
OFF
TV position
Name
Sound mode
- - Min.
VIDEO
AV1
Component
Input mode
Signal mode
`
Off-timer
OFF
- - Min.
RGB
RGB
H: 48.4 kHz
V: 60.1 Hz
Off-timer
OFF
Input Mode
Input horizontal frequency
Input vertical frequency
- - Min.
24
TV SETUP OPERATION
How to use the On-Screen Display (OSD) system
With the On-Screen Display system, you can access the various kinds of the features and functions in this product.
• Basic Operation
Picture
Audio
Timer
Setup
1. Press
button on the remote control or Menu button on the
control panel of the unit. The Main Menu is displayed on the screen
as shown on the right.
2. To select the item, press
buttons.
The selected item will be highlighted in Yellow.
Select OK Set
3. Press
button to set your selection.
The selected menu page will be displayed on the screen.
4. Use
Press
5. Use
Press
<Main Menu>
buttons to choose the item on the MENU page.
button to set your selection.
buttons to adjust the item values or choose options.
button to set your selection.
6. To exit from the menu, press
button.
NOTE
Menu
button
Ⴠ The OSD menu screen will be closed automatically when no
operation has been made for about 30 seconds.
Ⴠ If the item in menu is shown in gray, it means that it cannot be
selected or adjusted.
L37X01AU
Menu button
L42X01AU
Menu button
25
TV SETUP OPERATION (continued)
Main Menu List
Menu
Page
Picture Mode
30
Contrast
30
Brightness
30
Color
30
Sharpness
30
Menu
Audio
Timer
Page
Perfect Volume
32
TV Speakers
32
Reset
32
Off Timer
33
Mode
27
Auto Tuning
Picture(TV/AV)
Picture(TV/A
V
Tint
30
Search
27
Color Temperature
30
Position
27
Back Light
30
Frequency
27
Reset
30
Name
27
Black Enhancement
31
Sound System
27
Manual Tuning
Setup(TV)
DNR
31
Color System
28
MPEG NR
31
Skip
28
Film Mode
31
Anteena Att.
28
3D Comb Filter
31
Fine Tuning
28
Picture Size
31
Sort
28
Reset
31
Teletext Language
28
Contrast
36
Video Power Save
50
Setup(AV)
Picture(RGB)
Brightness
36
Reset
50
Color Temperature
36
Auto Adjust
35
Back Light
36
Image Position
35
Reset
36
Horizontal Clock
35
Audio Mode
32
Clock Phase
35
Treble
32
Reset
35
Bass
32
Frequency Display
35
Balance
32
WXGA
35
Matrix Surround
32
Dynamic Bass
32
Setup(RGB)
Audio
26
TV SETUP OPERATION (continued)
Setup Menu (TV mode)
You can install channels and make the various settings related channels.
1. Press
button.
2. Select “ Setup ” menu and press
button.
3. Select the preferred menu item and press
button.
Selected Items
Select
OK Set
Return
Setup hint
Position
Mode
Auto Tuning
Setup
Auto Tuning
Manual Tuning
Fine Tuning
Sort
Teletext Language
Direct
Searches every channel. Store the channels in order of
tuning.(1~125)
Searches available channel. Store the channels in fixed number
according to broadcasting standard. The channel number 1~12
and 21~69 are displayed as C , and the channel number
101~146 are displayed as S .
Search
Tune the local channels automatically.
Press
button to start searching.
Position
Press channel up (+) down (-) buttons to input position number
(1~125) or channel number (C** or S** ).
Search the frequency by using
Mode is set to [position].
button when Auto Tuning
Frequency
When Auto Tuning Mode is set to [Direct], this function is not
available (grayed out).
Manual
Tuning
1. Move the cursor to the first digit and select the letters with
buttons.
2. Move to the next digit with
button.
3. Press
button again when you finish inputting all the
letters.
• The selectable letters are as follows: “0”~“9”, “A”~“Z”, “ ”
(blank), “+”, “- “, “.” (Period) and “?”.
Name
Auto
M
Sound System
D/K
Select [Auto] normally.
In case that sound is not output correctly, select the other modes
depending on the received signal.
I
B/G
NOTE
When you turn ON the television for the first time, your television is at “the original factory setting” and may not be able to
display the image normally on the TV screen. Please select Auto Tuning to set the TV channel.
27
TV SETUP OPERATION (continued)
Setup Menu (TV mode) (continued)
With this menu, you can access various kinds of features relating to TV channel settings.
Setup
Auto Tuning
Manual Tuning
Fine Tuning
Sort
Teletext Language
Select
Selected Items
OK Set
Return
Setup hint
Auto
NTSC 4.43
Color System
SECAM
Select [Auto] normally.
In case that color is not displayed correctly, select the
other modes depending on the received signal.
PAL
NTSC 3.58
Manual Tuning
Off
Skip
On
Off
Anteena Att.
On
Fine Tuning
Sort
-56~+56
It allows you to skip unregistered channels automatically
when you use channel up (P+) down (P-) buttons to select
channels.
This function will automatically skip unavailable
channels when set to on.
The noise on the screen or interference could be reduced
in case that the receiving field strength are too strong.
• The selection on this item is applied to all the channels.
X: Increase the frequency data for the main tuner.
W: Decrease the frequency data for the main tuner.
You can change the order of channels as follows.
1. Move the cursor to the channel row you want to change
button.
order and then, press
2. The color of the letters on the designated line will be
turned into yellow bracket and with [ ].
3. Move the designated row by using
buttons.
4. Press
button to fix the position.
• This function is not available (grayed out) when the Auto
Tuning Mode is set to [Direct].
28
TV SETUP OPERATION (continued)
Channel Selections
There are 2 ways to select the channels: stepping through the
channel, and selecting by number.
Channel
Up/Down button
Stepping through the Channel
Press Channel Up/Down button to switch the next or previous channel on the list.
L37X01AU
Channel Up/ Down
L42X01AU
Channel Up/ Down
Selecting by Number
Enter the number of acquired channel by using numeric buttons on the remote control.
The selectable channel number and method differ depending on the modes
(“Position” or “Direct”) of Auto-tuning. See 27 for the details.
ŏ If you have tuned channels with "Position" mode:
The position number of 0~125, of which you have tuned with "Position" mode, can be selected by using numeric buttons on
the remote control.
ŏ If you have tuned channels with "Direct" mode:
Input the number "001~012 (displayed as C1~C12) or 021~069 (displayed as C21~C69) or 101~146 (displayed as
S1~S46)" by using numeric button on the remote control.
29
TV SETUP OPERATION (continued)
Picture Setting
You can make specific adjustments for the picture based on your preference.
1. Press
button.
2. Select “Picture” menu and press
button.
3. Select the preferred menu item and press
button.
(By pressing ź button at the bottom of each menu page, the next Picture menu will appear on the screen.)
NOTE
Please see 36 about picture setting of PC
Page 1
Picture
Picture Mode
Contrast
Brightness
Color
Sharpness
Tint
Color Temperature
Back Light
Reset
Select
OK Set
Page 2!
Picture
Off
0
Black Enhancement
DNR
MPEG NR
Film Mode
3D Comb Filter
0
Picture Size
1
Reset
Reset
Dynamic
+31
0
0
Cool
0
Select OK Set
Reset
Off
Off
Off
Off
Return
Return
Selected Items
Setup hint
Cinema
You can make the better selection from 3 modes
Depending on the lighting condition and intended use.
Dynamic : Suitable for the brighter conditions.
Natural : Suitable for the normal lighting condition.
Cinema : Suitable for watching movie.
Contrast*
-31~+31
This adjusts the contrast to meet the lighting environment by using
Brightness*
-31~+31
With this function, black is adjusted to change the overall brightness by using
button.
Color*
-31~+31
It can adjust color density based on your preference by using
Sharpness*
-15~+15
Dynamic
Picture Mode
Tint*
Natural
button.
button
Preferred sharpness can be adjusted by pressing
button for softer image or
Pressing
Green.
-31~+31
button
button for sharper image.
enhances red, while pressing
button enhances
The setup hint is adjusting for the realistic skin color. This is not available by
PC mode when receiving RGB signal.
Cool
Color
Temperature*
You can select from 3 settings (default): Cool, Normal, Warm depending on
the color condition with
buttons.
You can adjust the setting in “User” item.
Normal
Warm
User
Back Light
-20~+20
Adjust the brightness of the Back Light for the maximum visibility.
Each item on this menu screen can be restored to the original factory settings
by pressing
button.
Reset
Information
*
The setting of the items indicated by “
” can be stored for each of inputs and picture modes (Dynamic/Natural/Cinema).
You can enjoy different setting depending on the selected input such as VCR in AV3.
30
TV SETUP OPERATION (continued)
Picture Setting (continued)
Selected Items
Setup hint
Off
Low
Black Enhancement
Middle
Adjusts the black level compensation.
High
Off
Low
DNR
The noise on the screen or interference could be reduced, especially at
the area of weak electric field.
Middle
High
Off
MPEG NR*
Low
This is a noise reduction system for MPEG picture signal.
(ex. against mosquito noise and block noise)
High
Off
This helps to make the moving image smooth.
On
On: Automatically identify if it is the movie film and faithfully reproduces
the original film images.
Off: Set to Off if the image does not look natural.
Film Mode
Off
3D Comb Filter
On
1
Picture Size
2
This is available only when receiving PAL/ NTSC 3.58 composite signal.
This reduces the dot and color blurring in minute scales so that it can
reproduce purer color.
Select [1] it will display the original picture completely. If the images
from TV signal (especially CATV) has blacken gap in Panoramic mode,
and select [2], it will make up for the gap. But when display is no
available in “Cinema” size. This function only works for TV, Composite,
Component and HDMI input.
Each item on this menu screen can be restored to the original factory
settings by pressing
button.
Reset
Information
The settings of the item indicated by “
NOTE
About “Film Mode”
*
” can be automatically stored depending on the signal mode.
Ⴠ The image might not look natural depending on the image contents.
Phenomena such as
཰ When switching the subtitles of a film or images, the image displays fine horizontal streak lines.
ཱ When switching the scenes such as commercial and animation, the image displays fine horizontal streak line.
ི When displaying a ticker or subtitle, the text on the image becomes rough ( aliasing).
ཱི When watching the image form AV input which is connected to any external equipment, the OSD of external
equipment displays fine horizontal streak lines.
These phenomena occur due to the method of converting the image.
Please note that this is not malfunction.
In case that it is disturbing, please set to Off.
In addition, the effect of this menu might vary depending on the size setting (See 46 )
Also, this might not be ineffective depending on the scene of image.
31
TV SETUP OPERATION (continued)
Audio Setting
You can adjust and customize the audio condition as you like.
1. Press
button.
2. Select “ Audio” menu and press
button.
3. Select the preferred menu item and press
button.
Audio
Audio Mode
Treble
Bass
Balance
Matrix Surround
Dynamic Bass
Perfect Volume
TV Speakers
Reset
Select
Selected Items
OK Set
Movie
+15
0
0L
R
Off
Off
Off
On
Reset
Return
Setup hint
Movie
Music
Audio Mode
Speech
You can select the most suitable sound condition from these 4 items.
You can adjust any value you preferred in “Favorite” item.
Favorite
Treble
-15~+15
Adjust the Treble of the sound.
Bass
-15~+15
Adjust the Bass of the sound.
-10~+10
Adjust the balance of the sound comes out from right and left side of
the speakers.
(Notice: When Matrix Surround is enabled, adjusting the Balance will
not completely mute any one speaker.)
Balance
Off
Matrix Surround
On
Off
Dynamic Bass
On
Off
Perfect Volume
On
Off
TV Speakers
On
Reset
The surround sound is mixed to left and right in order to create the
illusion of virtual surround speakers.
(Recommendation: when the Matrix Surround is on, ensure the
Balance is set to "0" for optimum surround sound effect.)
Dynamic Bass gives you the enhanced bass sound. Low frequency
signals can be boosted while the output signal amplitude is measured.
Automatically adjusts audio input levels to stay within a safe volume
range. For example, when the input sound is too loud, the volume is
automatically decreased.
This needs to be switched to Off when you want to listen to audio
from external equipment.
It is normally set to On when you operate the set using the built in
speakers.
Each item on this menu screen can be restored to the original factory
settings by pressing
button.
32
TV SETUP OPERATION (continued)
Timer Menu
This allows your television to turn Off (Standby mode) at set time automatically, which you may find useful.
Timer
Off Timer
ŻŹ Adjust
Selected Items
- - Min.
Return
Setup hint
- - Min.
30Min.
Off Timer
60Min.
This function automatically sets the power to Standby
mode when the selected time period has elapsed.
90Min.
120Min.
Information
One minute before the time you set, the screen will display “Time off within one minute".
33
TV SETUP OPERATION (continued)
Audio Switching (TV)
NICAM / Sound Multiplex (including A2) (TV mode)
You can make optimum use of available audio by pressing I/II button of remote control. Audio can be switched only if
receiving NICAM and sound multiplex signals; otherwise, pressing this button will have no effect, such as when only
mono sound is received.
These can be divided into two main categories: Bilingual/Dual Sound broadcast and Stereo broadcast.
Bilingual/Dual Sound broadcast
Bilingual broadcast is the broadcast available on the main and sub languages, while dual sound broadcast is available on
the primary and secondary sounds; for example, some sports programs contain broadcast commentary on a game as
primary sound, and a commentary about a team as the secondary.
When bilingual program is received, sound mode display appears in yellow as shown. Also, when receiving NICAM signals,
NICAM display will appear.
Each time I/II button is pressed, the display is switched in the sequence of following.
Sound multiplex signal received
ˮ˜˜˰
ˮ˜˰ʳ
NICAM signal received
Green
Yellow
Yellow
ϰ
Green
Yellow
Yellow
NICAM ˮ˜˜˰
NICAM ˮ˜˰ʳ
ϰ
[I]…Main language/Primary Sound
[II]...Sub language/Secondary Sound
ź…force mono: This selects main language or primary sound.
Stereo broadcast
With stereo broadcast, you can enjoy different sound from either side.
When a stereo program is received, sound mode display will appear in red as shown.
Also, when receiving NICAM signals, NICAM display will appear.
Press I/II button to switch between stereo and mono sound.
Sound multiplex signal received
Red
ϰ
Green
Red
ϰ
Green
NICAM signal received
NICAM
…Stereo
ϰ…...Force Mono
NOTE
Ⴠ Please select ź (force mono) in case of poor reception, noise, poor stereo sound due to signal condition so that you can
receive a clear mono sound.
Ⴠ
represents the Mono broadcast.
34
TV SETUP OPERATION (continued)
PC Adjustment Setting
You can adjust the display condition such as position adjustment and color setting while connecting to the PC and being
RGB mode. See 18 for the PC connection.
From Setup Menu (RGB)
1. Press
button.
button.
2. Select “ Setup” menu and press
3. Select the preferred menu item and press
button.
Setup
Auto Adjust
Image Position
Horizontal Clock
Clock Phase
Reset
Frequency Display
WXGA
Select
Selected Items
Ź
Ź
+4
21
Reset
Off
Off
Return
Exit
Setup hint
Adjust Horizontal Position, Vertical Position, Horizontal
Clock, and Clock Phase automatically.
or
button to start auto adjustment as needed.
• Press
The message “Auto Adjust” is displayed.
• Depending on the type of the signal, there is a possibility that
the display may not be adjusted in its optimum condition with
this function. In that case, please adjust each item manually.
Auto Adjust
• Press
button and
button to adjust the horizontal
and vertical display positions.
(For example: When user connect PC terminal to LCD TV set.
PC Display card provide timing is 1024x768 60Hz that
Horizontal range: -100~+100 and Vertical range: -22~+22.)
Image Position*
Horizontal Clock*
-31~+31
Clock Phase*
0~+63
Minimize the vertical stripes on the screen.
Minimize the blurring of the letters and stripes on horizontal
row.
• Make sure to adjust Horizontal Clock first before adjusting
Clock Phase.
Each item on this menu screen can be restored to the
Reset
original factory settings by pressing
Off
Frequency Display
button.
Select whether indicating the PC signal frequency information
on Input Signal Screen Display or not.
On
Off
WXGA
1280x768
• This function is available only for WXGA signal.
• Refer to “Recommended Signal List” on 58 .
1360x768
Information
The setting of the items indicated by “
35
*
” can be automatically stored depending on the signal mode.
TV SETUP OPERATION (continued)
PC Adjustment Setting (continued)
From Picture Menu (RGB)
1. Press
button.
2. Select “ Picture” menu and press
button.
3. Select the preferred menu item and press
button.
Picture
+31
Contrast
0
Brightness
Color Temperature Cool
Back Light
0
Reset
Reset
Select
Selected Items
OK Set
Return
Setup hint
Contrast
-31~+31
This adjusts the contrast to meet the lighting environment by using
button.
Brightness
-31~+31
With this function, black is adjusted to change the overall
button..
brightness by using
Cool
Normal
Color Temperature
Warm
You can select from 3 settings (default): Cool, Normal, Warm
depending on the color condition with
buttons.
You can adjust the setting in “User” item.
User
Back Light
Reset
-20~+20
Adjust the brightness of the Back Light for the maximum visibility.
Each item on this menu screen can be restored to the
original factory settings by pressing
button.
Information
There is a useful function to automatically store the setting on menu in almost every item so that you do not have to reset
every time.
36
TV SETUP OPERATION (continued)
Analog Teletext
What is “ Teletext”
Teletext is the written information services provided by each TV channel.
Most TV channels provide information via Teletext such as:
11:37:56
Page number
Ⴠ TV program schedule
Ⴠ Weather forecasts
Link Page
Ⴠ Sports results
Red
Green
Yellow
Blue
Ⴠ Newsflash
Select Teletext Language
1. Press
button.
2. Select “Setup” menu and press
button.
3. Select ”Teletext Language” and press
button.
Setup
Auto Tuning
Manual Tuning
Fine Tuning
Sort
Teletext Language
Select
Selected Items
Teletext Language
37
OK Set
Return
Setup hint
Select Teletext Language from 5 different categories
(West Europe, East Europe, Russian, Arabic and Farsi)
According to the area.
West Europe : Asian countries where the Teletext
Is broadcasting in English such as
Singapore, Australia, and Malaysia
East Europe : Poland, Sweden, Hungary
Russian
: Russia
Arabic
: Arab countries
Farsi
: Iran
TV SETUP OPERATION (continued)
Analog Teletext (continued)
How to Operate the Teletext
You can display the Teletext simply by pressing the remote control buttons.
Operation
Press
To activate Teletext mode.*
To exit from the Teletext mode.
[TV
Text]
To move to the next or previous page.
[Page Select]
~
To jump to the indicated page. ( Enter 3 digits.)
[Page Select]
To change Teletext picture size.
[Zoom]
To display Index page.
[Index]
To adjust Back Light of the image.
[Back Light]
To access Subtitle service directly (if the channel has the Subtitle
service broadcasting).*
[Subtitle]
To display Hidden text.
Ex. The answers of the Quiz or the Game page.
Press again to close the revealed answer.
[Reveal]
To return to actual broadcast temporarily while searching for the
Teletext page you request.
When the search is done, the designated page # will be displayed
on the upper left of the screen.
Press again to return to Teletext page.
[Cancel]
To access the link pages which are displayed at the bottom of the
page.
(Select the buttons corresponding to the colors of the letters on
screen.)
[Color]
To hold the text picture.
[Hold]
*
This is not available in the following conditions.
Ⴠ &RORUV\VWHP176&176&3$/3$/0
Ⴠ 1RLQSXWVLJQDO
Information
Ⴠ Each time the
button is pressed, the Teletext pages size will be change in single screen.
Ⴠ Some Teletext pages do not display Link Pages at the bottom of the screen. Press
button to display them.
NOTE
Ɣ Teletext function is different between Analog and Digital. Refer to
43
about Digital Teletext.
38
DIGITAL TERRESTRIAL TELEVISION (DTT) OPERATION
How to use the On-Screen Display (OSD) system
With the On-Screen Display system, you can access the various kinds of the features and functions.
Ⴠ Basic Operation
1. Press
button on the remote control or Menu button on the
control panel of the unit. The DTT Main Menu is displayed on
the screen as shown on the right.
TV Setup
Edit channels
Parental guidance
2. To select the item, press
buttons.
The selected item will be highlighted.
Installation
General settings
System
button to set your selection.
3. Press
The selected menu page will be displayed on the screen.
buttons to choose the item on the MENU page.
4. Use
Press
5. Use
button to set your selection.
(DTT Main Menu)
buttons to adjust the item values or choose options.
Press
button to set your selection.
6. To exit from the menu, press
button.
NOTE
Menu
Ⴠ The OSD menu screen will be closed automatically when no
operation has been made for about 30 seconds.
button
Ⴠ During DTT input, the part of OSD might not be displayed in 4:3
other display size with
mode. To display fully, select the
button. (Refer to 46 )
DTT Main Menu List
Check the reference page for details.
Menu
Function
Page
This jumps to the TV main menu containing Analog
TV functions, such as Picture menu and Audio menu.
46
Edit channels
You can set a list of favorite channels.
42
Parental guidance
This blocks programs with the selected rating.
44
Installation
This searches the available channels.
Search by its channel number, frequency,
bandwidth, or priority.
40
TV Setup
Manual scan
Quick scan
Search by the resident area.
40
Auto scan
Automatically search one by one.
40
Restore default
Restore the channel setting.
40
General settings
43
Option setup
Set up the display time of information banner.
43
Change pin
Change the Password.
44
Local time
Set up the local time.
45
Subtitle setting
Enable or disable the subtitle.
43
This displays the current DTT system information.
45
System
39
40
DIGITAL TERRESTRIAL TELEVISION (DTT) OPERATION (continued)
Installing Channels
You can search available channels in any of the following 3 methods.
1. Press
button on the remote control in DTT mode.
buttons and press
2. Select “Installation”, on the DTT main menu with
button.
3. The password is required to enter the Installation menu. The initial password is 0000.
4. You can select either of the followings by pressing
button.
x Manual scan: Searches by individual settings manually.
Installation
The box shown on the right appears. Fill out the following 4 items as needed.
Manual scan
Quick scan
Channel
num
Use
buttons or numeric button to enter the number.
(Ch2-Ch69) *In case of tuning Ch9A, select Ch2
(Frequency: 205.5MHz.).
Frequency
Use numeric button to enter the frequency.
Bandwidth
Select either 7MHz or 8MHz by using
7MHz normally.
Priority
Select High or Low by using
normally.
Auto scan
Restore default
Channel num
Frequency
Bandwidth
Priority
Manual scan
6
177500KHz
7 MHz
High
Start scan
buttons. Set to
buttons. Set to High
Then, press
button on “Start scan” of “Manual scan” column. If it finds a
channel, “Success” shows up. If not, “Timeout error” is displayed.
Installation
Manual scan
Quick scan
Auto scan
Restore default
x Quick scan: Searches channels of the selected area.
The list of the area shows up. Select one of those with
button.
buttons and press
Adelaide
Brisbane
Melbourne
Perth
Sydney
Batchelor
Canberra
Darwin
Press Ÿźto select city.
NOTE
x If you are uncertain about the area, please select “Auto scan” method or contact
the local dealer in your area.
x Auto scan: Searches every channel.
The message “Auto scan will take more than 10 minutes. Do you want to
continue?”
Select “Yes” and press
Installation
Manual scan
Quick scan
Auto scan
button to precede it.
Auto scan will take more
than 10 minutes.
Do you want to continue?
Yes
Exit
Restore default
Restoring Channels
This restores the all channel settings.
1. Press
button on the remote control in DTT mode.
2. Select “Installation”, on the DTT main menu with
buttons and press
button.
Installation
Manual scan
3. The password is required to enter the Installation menu. The initial password is 0000.
All setting would be lost.
Yes
Exit
Quick scan
Auto scan
4. Select “Restore default” and press
button. The message “All setting
would be lost” appears. Select “Yes” and press
Restore default
button.
NOTE
x The password will return to the default setting when activating “Restore
default”
40
DIGITAL TERRESTRIAL TELEVISION (DTT) OPERATION (continued)
Channel Selections
There are 4 ways to select the channels: stepping through the channel, selecting by number, selecting from the
program/favorite list, and using the Electronic Program Guide (EPG).
Stepping through the Channel
Press Channel Up/Down button to switch the next or previous channel on the list. Information banner is displayed every
time channel is switched.
Refer to 42 about the information banner.
Selecting from the Program / Favorite List
x Program List:
Program list
06-0007
7 Channel 1
06-0070
7 Channel 2
06-0071
7 Channel 3
06-0072
7 Channel A
06-0073
7 Channel B
06-0077
7 Channel Digital
All tuned channel is selectable from Program List.
1. Press
button on the remote control to show up the Program List.
2. Use
buttons to select and press
channel.
button. Then it jumps to the selected
x Favorite List:
Your favorite channels can be selected from Favorite List.
1. Press
Favorite list 1
06-0007
7 Channel 1
button on the remote control to show up the Favorite List.
Each time pressed, it switches to Favorite list 1, Favorite list 2 and off.
buttons to select and press
button. Then it jumps to the selected
2. Use
channel.
About how to set the channel in Favorite list, please refer to 42 .
Selecting by Number
Enter the number (the last 4 digits) based on the list by using numeric buttons on
the remote control. An empty information banner shows up with the entered
number. Channel is switched if the number is valid. If the entered number is not
valid for one of the setup channels, it automatically selects the closest channel.
0007
------:--
--:---:--
Using the Electronic Program Guide (EPG)
The EPG screen displays a list of the stored channel along with the program
information. You can select a channel from the EPG channel List.
Electronic Program Guide
Page 1/1
Monday 19 March 2007
06-0070 Seven HD Digital
22:00 – 23:00 Movie News
23:00 – 00:00 Sports News
1. Press
button to access EPG screen.
2. Use
buttons to select and press
channel.
3. Press
button or
button. Then it jumps to the selected
button again to return to normal screen.
Refer to 43 about Electronic Program Guide for details.
41
Prev Day
Next Day
Prec Page
Sports News 23:00 – 00:00
Highlights and features on today’s
sports in the world.
Next Page
OK Reserve
DIGITAL TERRESTRIAL TELEVISION (DTT) OPERATION (continued)
Making Favorite List
The “Edit channels” menu allows you to select your favorite channels and make a Favorite List in order to access easily to
the channel you watch most often.
1. Press
press
button on the remote control and select “Edit channels” and
Edit channels
button.
2. Use
buttons to select the channel, and
Fav. 2.
button to select Fav. 1 or
button to set up as Fav. List. The Ɔ mark will show up, which
3. Press
means as favorite channel. Pressing
button again on the mark will
cancel the setting.
You can display favorite list by pressing
CH No. CH name Fav.1 Fav.2
06-0007
7 Channel 1
06-0070
7 Channel 2
06-0071
7 Channel 3
06-0072
7 Channel A
06-0073
7 Channel B
06-0077
7 Channel Digital
Press ŸźŻŹto select. Then press [OK].
button. (Refer to 41 .
Information Banner
x Display information by changing channel
Whenever a channel is switched, the TV displays the banner containing the
brief channel information(name of channel and program, etc.)
06-0072
SDʳ
Now
C
IT’S ACADEMIC
05 : 00
05 : 02
05 : 30
7 Channel A
x Display information by changing channel
The TV displays not only brief information but also program description.
Each time
button is pressed, it displays information by following order.
Brief Channel Information Æ Current Program Description Æ
Next Program Description Æ Normal Screen
x Set up the display time
The display time of information banner can be set up from 1 to 20 sec.
1. Press
General settings Information box timeout 6 sec
Option setup
Change pin
Local time
Subtitle setting
Press ŻŹto select. Then press [OK].
button on the remote control.
2. Select “General settings” and press
3. Select “Option setup” and press
button.
button.
4. The box shows up, and selects the display time by using
buttons.
NOTE
x When you select “0 sec” for “Information box timeout”, the information
banner will not show up.
42
DIGITAL TERRESTRIAL TELEVISION (DTT) OPERATION (continued)
Digital Teletext
Teletext can provide various information with text on the screen.
Press
button to access. Press it again to return to the normal screen.
P100 Austext 100 Tue 14 Mar 16:04:58
AUSTEXT
MAIN
INDEX
COPYRIGHT INFORMATION ON 104
INDEX
INFORMATION
MAIN INDEX. . . .100
Operation
Press
To activate Teletext mode.
To exit from the Teletext mode.
GENERAL INDEX. . . . . . . . . .600
BUSINESS . . . . .113
NEWS . . . . . . . . .160
WEATHER . . . . . 300
TAB SERVICE . . 500
HOROSCOPES. . . . . . . . . . . 606
SCI/TECH NEWS. . . . . . . . . . 677
SHOWBIZ NEWS. . . . . . . . . . 683
GENERAL INFO. 600
[TV
Text]
TV PROGRAMS. 650
TEST PAGES. . . . . . . . . . . . . 690
CAPTIONS . . . . .801
MAKE AUSTEXT YOUR FIRST CHOICE
FOR LOCAL NEWS
NATIONAL NEWS INDEX PAGE 120
To move to the next or previous page
[Page Select]
~
[Page Select]
To jump to the indicated page.
To access Subtitle service directly ( if the
channel has the Subtitle service broadcasting).
[Subtitle]
NOTE
x See 37 how to operate at Analog teletext.
x The service of digital broadcasting signal varies depending on the area.
x When you press the color buttons along with the direction on the screen, you
can access the linked pages.
Electronic Program Guide (EPG)
The EPG screen displays a list of the stored channels along with information.
This provides the information for 7 days.
1. Press
button to display EPG screen.
2. You can adjust the EPG screen with the following remote control keys.
Button
Select a channel/program, Display information
Electronic Program Guide
Page 1/1
Monday 19 March 2007
Select a program from the list.
06-0070 Seven HD Digital
Ⴠ 7KHSLFWXUHRIVHOHFWHGSURJUDPLVGLVSOD\HGDWORZHUULJKWVFUHHQ
22:00 – 23:00
23:00 – 00:00
Movie News
Sports News
Ⴠ 7KHGHWDLOHGLQIRUPDWLRQRIVHOHFWHGSURJUDPLVGLVSOD\HGDWORZHUOHIWVFUHHQ
Select a channel.
Ⴠ 7KHSLFWXUHRIVHOHFWHGSURJUDPLVGLVSOD\HGDWORZHUULJKWVFUHHQ
Ⴠ 7KHGHWDLOHGLQIRUPDWLRQRIVHOHFWHGSURJUDPLVGLVSOD\HGDWORZHUOHIWVFUHHQ
Red/Green
Select date. (up to 7 days)
Yellow/Blue
Move to the next or previous page if more than on e page.
Button
Prev Day
Next Day
Prec Page
Next Page
OK Reserve
Sports News 23:00 – 00:00
Highlights and features on today’s
sports in the world.
Peserve a program
NOTE
Set the view timer by pressing
button on the selected item.
Ⴠ PDUNZLOOEHGLVSOD\HG
Ⴠ 8SWRLWHPVFDQEHVHOHFWHG
Ⴠ $PHVVDJHDSSHDUVZKHQWKHGHVLUHGSURJUDPLVDERXWWR
VWDUWZKLOH\RXDUHZDWFKLQJDQRWKHUFKDQQHO
Ⴠ 3UHVV
EXWWRQWRFDQFHOWKHUHVHUYDWLRQ
x The message appears only during
DTT mode. ( Please note that this
does not appear in TV, AV, RGB,
and HDMI mode.)
3. Press
button or
button to return to the normal screen.
NOTE
x Not all channels broadcast all program information data. Some channels do
not provide program name and details. In that case, only channel name are
displayed.
43
x This setting will be canceled once
turns Off the TV.
DIGITAL TERRESTRIAL TELEVISION (DTT) OPERATION (continued)
Subtitle
General settings
Option setup
Change pin
Local time
Subtitle setting
Auto setting
The enables (disable) the subtitle if available as your useful tool.
1. Press
button to display DTT main menu.
2. Select ”General settings” and press
button.
3. Select ”Subtitle settings” and press
button.
Auto subtitle
Enable
Disable
Press ŻŹto select. Then press [OK].
4. With
buttons select “Enable” and press
Subtitle On
button.
button on the remote control.
You can also activate the subtitle by pressing
“Subtitles On” or “Subtitles Off” will appears on the upper left corner.
NOTE
x Once Turing TV off, “Auto subtitle” returns to “Disable”.
Parental guidance
Child lock
No Block
Block G and above
Block PG and above
Block M and above
Block MA and above
Block AV and above
Block R and above
Block All
Parental Guidance
Any channel can be locked so that it cannot be selected for viewing without 4
digits pin code.
1. Press
button on the remote control.
button.
2. Select “Parental guidance” and press
3. The password is required to enter. (The initial password is 0000.)
4. With
buttons, select the rating and press
Parental Guidance Control is activated
for this program. select another
channel or enter password to overwrite.
button.
Password
After this protection, when encounter the channel blocked, the message show up
and the password is required to view the channel.
06-0070
-ʳ
Now
IT’S ACADEMIC
C
05 : 00
05 : 01
05 : 30
7 Channel 2
Audio Language (MPEG/Dolbyp Digital)
Audio language
The available Audio language (MPEG/Dolbyp Digital) can be selected.
1. Press
English (MPEG)
English (Dolby Digital)
button on the remote control in DTT mode.
2. The available audio language (MPEG/Dolbyp Digital) appears.
3. With
buttons, select the audio language and press
button.
Digital Audio Output
This enables you to select the optical digital audio output between PCM and
Dolbyp digital.
1. Press
button to display DTT main menu.
2. Select “General setting” and press
3. Select “Audio setting” and
4. With
button.
Digital output
PCM
Dolby Digital
Press ŻŹto select. Then press [OK].
button.
button, select either “PCM” or “Dolby Digital” and press
General settings
Option setup
Change pin
Local time
Subtitle setting
Auto setting
button.
NOTE
x In case that MPEG audio is selected by using I/II button, or the broadcasting
program has only MPEG audio, it outputs only PCM audio even if “Dolby Digital”
is selected in “Audio setting” menu.
x If Dolbyp Digital audio is selected by using I/II button, you can select either
“Dolby Digital” or “PCM” from “Audio setting” menu.
44
DIGITAL TERRESTRIAL TELEVISION (DTT) OPERATION (continued)
Change Pin
To use the locks effectively, do change the pin number from the default setting,
which should be known and remembered only by you. The default setting is
0000.
1. Press
General settings Old password
New password
Option setup
Change pin
Confirm new password Local time
Subtitle setting
button on the remote control.
2. Select “General setting” and press
3. Select “Change pin” and
button.
button.
4. The box appears to fill out the old and new password, and the confirmation
of the new password.
5. Use the numeric number to enter.
NOTE
x In case that you forget your password, please refer to Troubleshooting on 52
Local Time
Make sure to select your resident area to set up the correct local time.
1. Press
button on the remote control.
2. Select “General setting” and press
3. Select “Local time” and
4. With
General settings
Option setup
Change pin
Local time
Subtitle setting
Audio setting
button.
button.
buttons, select the area and press
Press ŻŹto select. Then press [OK].
button.
Checking DTT System Information
System
Status
This can display current DTT system information.
1. Press
button on the remote control.
2. Select “System” and press
3. Pressing
Current time zone
Greenwich mean time
Adelaide, Aust.
Brisbane, Aust.
Canberra, Aust.
Darwin, Aust.
Melbourne, Aust.
Perth, Aust.
Sydney, Aust.
Tasmania, Aust.
System information
H/W Version : H2-DT640HD
S/W Version : 1.2.0
Release time : JUL 27 2007 21:06:23
button.
button on “Status” shows up System information.
(H/W version, S/W version, and Release time)
System information. Press [Return] to return.
*The above is an example
Jump to TV Setup Menu
“TV Setup” menu can be accessed from the DTT main menu.
It jumps to the TV main menu containing Analog TV function, such as Picture
menu and Audio menu.
Refer to 26 ~ 37 regarding the setting form the details.
45
Picture
Audio
Timer
Setup
Select OK Set
FUNCTION
Size Switching
Each time
button of the remote control is pressed, the screen
display size is switched in sequence, and the status will be displayed
at the bottom of the screen.
TV/AV signal input
ŏ Display Size
Watching standard Definition Picture(480i,480p,576i,576p)
TV/AV1/AV2/AV3/AV4 /HDMI1~3
4:3
Panoramic
Cinema
Picture Size
Full
You can display the image at optimum condition by selecting display size depending on the current output image as
shown below.
Input Signal
Display Screen
Display Size
To display suitable screen as follows.
When Watching Standard Definition Picture (TV, 480i, 480p, 576i, 576p)
(4:3 Signal)
4:3
Play a 4:3 image on screen faithfully. Blanking
occurs on both sides.
Panoramic
Play a 4:3 image which enlarges horizontal and
vertical size of the middle in equal scales, and
displays both sides appearing much wider.
Cinema
(Cinema)
Full
Play a 21:9 image in 4:3 frame (Cinema size)
expanding vertically.
*In some case, slight blanking may remain at the top
and bottom.
Play a 4:3 image faithfully in the standard vertical
size and horizontally squeezed.
(Squeeze)
16
Information
Aspect ratio represents horizontal: vertical ratio on screen.
Watching High Definition Picture(720p, 1080i, 1080p (HDMI only))
DTT/AV1,2/HDMI1~3: Only Full mode signal output.
16(or 21)
9
9
3
4
NOTE
Ⴠ The size will fix as Full mode and not change when receiving High Definition Picture (720p, 1080i, 1080p (HDMI only)).
Ⴠ If the images from High Difinition Picture has blacken gap and select Picture Size [ 2 ], it will make up for the gap. Refer to 31 .
CAUTION
Using a wide-screen television
Ⴠ This television has a screen mode selection feature. If an incompatible screen mode is selected to play certain
software, such as a TV program, the image would appear different form the original. Take this into consideration
when making screen mode choices.
Ⴠ Use of the wide feature displaying enlarged pictures in coffee shops, hotel and other establishments for commercial
or public viewing purposes could infringe on the copyright holder’s right protected by Copyright Law.
Ⴠ When a normal 4:3 image (not wide screen) is displayed over the entire screen in the Panoramic mode, the
peripheral image may disappear partly and/or appear distorted in some cases. Use 4:3 mode to view the image
reflecting original intention.
46
FUNCTION (continued)
Size Switching (continued)
RGB signal input
You can select a suitable size depending on the resolution.
Full
4:3
Display Area Selection Diagram
Resolution
Full
4:3
640 x 400 (VGA)
640 x 480 (VGA)
800 x 600 (SVGA)
1024 x 768 (XGA)
1280 x 768 (WXGA)
1280 x 1024 (SXGA)
1360 x 768 (WXGA)
Multi Picture Mode
With this feature, you can watch different channels simultaneously on one screen in several ways.
As for the available signals, please refer to "Recommended Signal List" on 57 , 58 .
Activate the Multi Picture Mode in HDMI Mode
To activate Multi Picture mode in either TV, AV, HDMI, and RGB mode, press
the remote control.
on
2-picture mode
You can watch two different pictures side by side.
This mode is available in both TV mode and AV mode ( AV1~4 Input).
Control on the side with Speaker Icon
Audio is output from the selected picture with the speaker icon.
Switch the Input modes (HDMI1~3) on the Main-Screen.
Switch the Input modes (DTT/TV and AV1~4) or change
Channels on the Sub-Screen.
1. To shift the speaker icon
, press
button.
Ɣ The speaker icon
will be shifted from A to B back-and-forth.
2. To change the channel of the of the Sub -Screen
Ɣ Make sure that
mark is located on the Sub -Screen.
Ɣ Press
HDMI
1
to select channels.
3. To change the Input mode of the Sub -Screen
Ɣ Make sure that the speaker icon is located next to the Input mode indication of
the Sub -Screen
Ɣ Press Input Select buttons on the remote control. ( DTV/TV , AV1~4 are available)
NOTE
Ɣ The message “ Not Available” will be appeared on the screen when the
combinations of the Input modes are not acceptable.
(See the Table below for details.)
47
The selected picture with speaker icon
A
Main-Screen
B
Sub-Screen
FUNCTION (continued)
Multi Picture Mode (continued)
Table: Mix-and –Match of the Input Modes ( HDMI)
Sub
DTT
TV
AV1
AV2
AV3
AV4
HDMI1
O
O
O
O
O
O
HDMI2
O
O
O
O
O
O
HDMI3
O
O
O
O
O
O
Main
(O: Available)
Activate the Multi Picture Mode in RGB Mode
When you activated the Multi Picture mode in RGB Input, the picture will be displayed at the mode which the Sub-screen
is displayed inside of the large screen (Main-screen).
Ɣ To activated Multi Picture mode, press
on the remote control.
The speaker icon
indicates the following.
Ɣ The audio sounds can be heard on the side with the speaker icon.
Ɣ When the speaker icon is on the Sub-screen
Ɣ Change channels.
Ɣ Switch the Input modes ( DTT/TV, AV3~4 and HDMI1~3) on the Sub-screen.
(Main-screen is only for RGB Input.)
1. To shift the speaker icon
, press
button.
Ɣ The speaker icon
will be displayed in front of the Input mode indication.
Input mode indication
Main-Screen (upper)
2. To change the channel of the Sub-screen.
Ɣ Make sure that
mark is located on the Sub-screen.
Ɣ Press
Sub-Screen (lower)
to select channels.
3. To change the Input mode of the Sub-screen.
Ɣ Make sure that the speaker icon is located next to the Input mode indication of
the Sub-screen (lower).
Ɣ Press Input Select buttons on the remote control. (DTT/TV, AV3~4, and HDMI
1~3 are available)
4. To exit from the Multi Picture mode, press
RGB
1
(Sub-
button.
Screen)
NOTE
x When operating Multi Picture mode, the “Power Save mode” is not available even though the Horizontal / Vertical Sync.
Signal ( or any kind of Video signal) has not input for certain period of time.
x The message “ Not Available” will be appeared on the screen when the combinations of the Input modes are not
acceptable.
(See the Table below for details.)
Table: Mix-and –Match of the Input Modes (RGB)
Main
RGB
Sub
DTT
TV
AV3
AV4
HDMI1
HDMI2
HDMI3
O
O
O
O
O
O
O
As for the available signals, please refer to "Recommended Signal List" on 57 , 58 .
(O: Available)
48
FUNCTION (continued)
Multi Picture Mode(continued)
Activate the Multi Picture Mode in Video Mode
To activate Multi Picture mode in either TV, AV, HDMI, and RGB mode, press
on the remote control.
2-picture mode
You can watch two different pictures side by side.
This mode is available in both TV mode and AV mode ( AV1~4 Input).
Control on the side with Speaker Icon
Audio is output from the selected picture with the speaker icon.
You can switch the Input modes ( DTT/TV and AV1~4) or change
Channels only on the side with Speaker icon.
1. To shift the speaker icon
, press
button.
Ɣ The speaker icon
will be displayed in front of the Input mode indication.
The selected picture with speaker icon
2. To change the channel of the Sub-screen.
Ɣ Make sure that
mark is located on the Sub-screen.
Ɣ Press
5
3. To change the Input mode of the Sub-screen.
Ɣ Make sure that the speaker icon is located next to the Input mode indication
of the Sub-screen (Upper).
Ɣ Press Input Select buttons on the remote control. (DTT/TV, AV3~4, and
HDMI 1~3 are available)
4. To exit from the Multi Picture mode, press
A
B
Main-Screen
button.
NOTE
Ɣ You cannot select input on both sides simultaneously.
Ɣ You cannot select the same AV input on both sides simultaneously.
Ɣ The message “ Not Available” will be appeared on the screen when the
combinations of the Input modes are not acceptable.
(See the Table below for details.)
Table: Mix-and –Match of the Input Modes
Sub
DTT
TV
AV3
AV4
HDMI1
HDMI2
HDMI3
DTT
-
O
O
O
O
O
O
TV
O
-
O
O
O
O
O
AV1
O
O
O
O
O
O
O
AV2
O
O
O
O
O
O
O
AV3
O
O
-
O
O
O
O
AV4
O
O
O
-
O
O
O
Main
(O: Available)
49
AV3
to select channels.
Sub-Screen
FUNCTION (continued)
Picture Freezing
By pressing
button, you can change to freeze mode
easily anytime you like. Press it again to return to normal
picture.
Freeze button
Power Save Mode
When the AV input is selected
You are provided the function to save power consumption when no signal is detected in AV input. Set to On in “Video
Power Save” from Function Menu, which leads to the power save mode in AV1 /AV2 /AV3 /AV4 /HDMI1 /HDMI2 /HDMI3
and the Standby mode in other AV input. Please see the table below for details.
1. Press
button.
2. Select “Setup” menu and press
Setup
Video Power Save
Reset
Select OK Set
button.
3. Select ”Video Power Save” and press
Off
Return
button.
Off
On
Video Power Save
When no signal is detected
When signal is input during
on in “Video Power Save”
AV1~AV2,
AV3~AV4,
HDMI1~3
Condition
Indicating Lamp
Power Save*
Orange
Turns On automatically
*Power Save that only control Back Light On/Off.
Returning to operating status
Ɣ Press the Input Select button of the control panel or the remote control to restart the television.
When the RGB input is selected
When this unit is connected to a VESA DPMS computer, the Power Save mode (Operation mode: Off) can be set
to be activated automatically when the computer is not being used to reduce power consumption by this unit.
RGB sync
signal
Horizontal
Vertical
Yes
No
Yes
No
Yes
Yes
No
No
PC signal
Active
(normal display)
Blank (no display)
Operation mode
On
Off
Indicating lamp
Lights green
Lights orange
Returning to operating status
Ɣ Operate the personal computer, then input computer’s H. sync, V. sync or press the Sub Power button of the control panel
or the remote control to restart the television.
50
FUNCTION (continued)
DVD Player/ STB Selection
You can use this remote control to operate DVD Player and Set Top Box of other
manufacturers as well as this set. After press
or
button, press (or hold) the
required buttons to select the manufacturer and type as shown below.
Set up
Example: HITACHI DVD
1. Set up the manufacturer.
Press
button so that the button light. While the button is lighting (Approx. 30
seconds), press
and
buttons.
2. Set up the manufacturer type.
Press
button so that the button light. While keeping
Then press
buttons.
button depressed.
3. Confirm the setting.
After setting the manufacturer and type, press the Power On/ Off button on the remote
control. If the DVD dose not switch ON, repeat setp 1 and 2 using other manufacturer
types as listed.
<”DVD” Selection>
Manufacturers
of DVD Player
Set
Manufacturer
HITACHI
Set type
Manufacturers
of DVD Player
~
RCA
FUNAI
Set
Manufacturer
Mitsubishi
Pioneer
~
ONKYO
RED
Panasonic
~
ZENITH
GREEN
TOSHIBA
~
THOMSON
~
SHINCO
Philips
JVC
SKYWORTH
SAMSUNG
BUBUKO
~
YELLOW
BLUE
Sony
~
DENON
~
Sharp
~
YAMAHA
~
<”DVD” Selection>
Manufacturers
of STB Player
HITACHI
Set
Manufacturer
Set type
~
TOSHIBA
DGTEC
Panasonic
Zinwell
PX
NOTE
Ɣ Please note that not all models of the listed manufacturers can be operated using this remote control.
51
Set type
TROUBLESHOOTING
Before calling service technician, check the following tables first. If the problem is not be solved with the suggested
procedures, contact your local dealer. For your safety, NEVER try to repair the product by yourself.
When Following Messages Appear on the Screen
Message
Condition / Action
Power Save
This indicates it is in Power Save mode. (in RGB mode)
The indicating lamp lights in orange.
No Sync. Signal
The unit cannot detect any signals from any input terminals.
Ɣ Check if the cable is connected correctly and firmly.
Ɣ Check if the power of the external equipment is ON.
Ɣ Check if the input selection matches the connection terminal.
Ɣ Check if the PC is in Power Save mode or not.
Auto Adjust
This indicates that it is in the process of auto adjusting.
(in PC input mode)
Invalid Mode
The unit receives unsupported signals.
Ɣ Check if the cable is connected correctly and firmly.
Ɣ Check if the input signal is compatible with the specification of the television.
Page
50
16 ~ 22
35
55 , 57
58
This shows when the selected operation is not available.
Not Available
Weak signal
Bad or No signal
Ɣ Check aerial lead if it is disconnected/damaged/misaligned. (in DTT mode)
Ɣ Check with your dealer if it is out of signal area or not. (in DTT mode)
Database is Empty
Symptom and Check List
Symptoms
Check list
Page
Ɣ Check the Indicating lamp status (Off, Red, Green, or Orange).
Ɣ Check the connection of the Power Cord and/or other cables.
Ɣ Check if the Main Power of the unit or external equipment is
No picture – no sound
Snowy picture-poor sound
Multiple images-normal
sound
Intermittent interference
ON.
Ɣ Check if the TV mode is selected.
Ɣ Check if the TV is in “Standby mode” or “Power Save mode”.
Ɣ Adjust the values in “Picture menu” and “Audio menu”.
Ɣ Check the aerial connection and direction.
Ɣ The TV station may have broadcast difficulties.
Ɣ Try another channel.
Ɣ Check the aerial connection and direction.
Ɣ Fine tuning the TV.
Ɣ Check the connection of the external equipment.
Ɣ The TV station may have broadcast difficulties. Try another
channel.
16
~ 23
50
16
16 ,
28
Ɣ Check if the source of interference is shielded well.
Ɣ Remove those kinds of electrical devices away from the TV.
Ɣ Check the volume level.
Normal picture, but no
sound
Ɣ Check if the
button has been press or not.
Ɣ Make sure that the headphone is NOT connected.
16
~ 20
23
Ɣ Check the connection of the external equipment.
52
TROUBLESHOOTING (continued)
Symptom and Check List (continued)
Symptoms
Ɣ No picture – normal sound
Ɣ The remote control does not
work.
Ɣ Normal picture but no
color-normal sound
Check list
Page
Ɣ Check the value level of “Brightness” and “Contrast” in “Picture
Menu”.
Ɣ Check if the batteries are installed correctly.
Ɣ The batteries might be exhausted. Replace them with new ones.
Ɣ Remove all the obstructions in front of the sensor window on the
12 ,
13
unit.
Ɣ Check if the buttons of the control panel can work.
16 ~ 22
Ɣ Check the connection of the external equipment.
Ɣ Check the “Color” in “Picture Menu”.
30 ~ 31
Ɣ Image is paused.
Ɣ Check if the TV is in freeze mode by pressing
Ɣ No picture
Ɣ Check if the Power Cord is plugged into the socket firmly.
Ɣ Check if the Main Power is ON.
The Indicating lamp ĺ Off
30
button.
50
11 ,
16 22
Ɣ Check if all the cables of the external equipment are connected
Ɣ No picture
The Indicating lamp ĺ Orange
It means that the unit is in
“Power Save Mode”.
correctly and firmly.
Ɣ Check if the power of the external equipment is ON.
Ɣ Check if the TV/AV mode has been selected correctly.
Ɣ Check if the PC is in Power Save mode or not.
50
Ɣ Refer to “Power Save mode” and “When following messages
appears on the screen”
Ɣ No picture
The indicating lamp ĺ Green
Ɣ The top of the television and
surface of the panel heat up.
Ɣ Image cannot be displayed in
the correct position.
Ɣ Check if the signal cable is connected correctly and firmly.
Ɣ Adjust the level of Brightness and Contrast lower.
16 ~ 21
Ɣ It may happen when you use the unit for long hours. Turn off the
Main Power of the unit for a while. Please note that this is not all
function.
Ɣ Press Recall button
to check if the input signal of the displayed
image is compatible with the specification of the television.
22
25 ,
54
Ɣ When the VCR is in special
playback features (Fast forward
or Rewind), the screen gets
dark and cannot see the image
at all.
Ɣ The images are not displayed
on sub pictures (right side) in
“Multi Picture mode”
Ɣ Some screen display size
cannot be switched.
Ɣ Cannot be displayed the image
from HDMI 1~3
Ɣ It could happen when the VCR is connected to Component output,
such as 480i. This is not malfunction.
Ɣ Try Composite output or S-video output and check the picture again.
Ɣ There are some combinations of input signals that the images are
not displayed on sub pictures (right side).
Ɣ Check the signal status by pressing the
button on the remote
control. The available screen display size is different depending on
the current signal status.
Ɣ Check if the cables are connected correctly.
Ɣ Check the output format of the equipment.
Ɣ (Please refer to “Connecting Procedure” and “Recommended Signal
List”.)
Ɣ The image and audio are
mismatched when in RGB or
HDMI 1~3 mode.
53
47 ~ 49
Ɣ Please check the Table of “Multi Picture Function” for details.
Ɣ Check if the PC (RGB)/HDMI analog audio input terminal is
connected to the same external device.
24
46 , 47
15
55 ~ 58
18 , 19
TROUBLESHOOTING (continued)
Symptom and Check List (continued)
Symptoms
Page
Check list
Ɣ The image on the screen is moving in an
oblique direction.
(PC input mode only)
Ɣ Adjust “Horizontal Clock” and “Clock
Phase”.
35
Ɣ Adjust “Horizontal clock”.
35
Ɣ Try “Auto Adjust”.
35
Ɣ The coarse horizontal stripes could be
seen in full-display mode.
(PC input mode only)
Ɣ The part of the image is lacking.
AAAAA
(PC input mode only)
Ɣ Check the Signal status of the PC by
Ɣ The horizontal stripes are moving
pressing Recall button
control.
vertically with flickering screen.
(PC input mode only)
Ɣ When the characters are displayed on the
whole screen, the vertical stripes appear
and some of the characters are blurred.
(PC input mode only)
abcdefgABCDEFGabcd
abcdefgABCDEFGabcd
Ɣ When the letter string is displayed in
full-screen, all of the characters on the
screen is blurred.
(PC input mode only)
abcdefgABCDEFGabcd
abcdefgABCDEFGabcd
Ɣ When the small patterns are displayed on
the screen, the entire screen is flickering.
(PC input mode only)
Ɣ Image cannot be displayed in the correct position.
(PC input mode only)
on the remote
Ɣ Try “Auto Adjust”.
Ɣ If the display condition is not improved with
35
35
Auto Adjust, adjust “Horizontal Clock”.
Ɣ Try “Auto Adjust”.
Ɣ If the condition is not improved with Auto
Adjust, adjust “Clock Phase” till you get
clearest image.
Ɣ Try “Auto Adjust”.
Ɣ If the condition is not improved with Auto
Adjust, adjust “Clock Phase” till you get
flicker-free display.
35
35
Ɣ Press
button to check if input signal of
the displayed image is compatible with the
specification of the television.
51 ,
35
Ɣ It might occur because it is tuned to digital
Ɣ No Picture or sound is output. (DTT mode only)
teletext channel.
45
Ɣ Return to another channel.
Ɣ Press and hold down
Ɣ Forgotten password. (DTT mode only)
Ɣ Due to the bad reception, block noise (DTT mode only)
Ɣ Local time displays incorrectly.
(DTT mode only)
[Yellow],
[Blue] and
buttons on the remote
control simultaneously for over 3 seconds
so that the password returns to the default
setting (0000).
Ɣ Check the aerial system to improve signal
quality.
Ɣ Check if you select correct area in “Local
time” from “General setting”.
44
15
45
54
PRODUCT SPECIFICATIONS
L37X01AU
SPECIFICATION
Display dimensions
Approx. 37 inches
(820 (H) × 461 (V)mm, diagonal
941 mm)
Resolution
1920(H) x 1080 (V) pixels
Panel
L42X01AU
Approx. 42 inches
(930(H) × 523 (V)mm, diagonal
1067 mm)
Net dimensions
including Stand:
910 (W) x 680 (H) x 365 (D) mm
excluding Stand:
910 (W) x 627 (H) x 125 (D) mm
including Optional Stand:
1033 (W) x 749 (H) x 365 (D) mm
excluding Optional Stand:
1033 (W) x 692 (H) x 126 (D) mm
Net weight
including Stand: 24.4 kg
excluding Stand: 20.1 kg
including Optional Stand: 28.5kg
excluding Optional Stand: 24.2 kg
Ambient
conditions
Temperature
Operating: 5°C to 35°C, Storage: 0°C to 40°C
Relative humidity
Operating: 20% to 80%, Storage: 20% to 90% (non-condensing)
Power supply
AC110 - 240V, 50/60Hz
Power consumption/at standby
177W/< 2W
Audio output
speaker total 20W
210W/< 2W
(VIDEO input)
Input terminals
AV1 Ⴠ AV2: component video input terminal (RCA)
L/R audio input terminal (RCA)
AV3 Ⴠ AV4: composite video input terminal (RCA)
S video input terminal*1
L/R audio input terminal (RCA)
HDMI1~3 : HDMI input terminal
Input signals
Composite video : PAL, SECAM, NTSC3.58, NTSC4.43, PAL60
Component video: 480i, 576i, 480p, 576p, 720p/50, 720p/60, 1080i/50, 1080i/60
HDMI1~3 : 480i, 576i, 480p, 576p,720p/50, 720p/60,1080i/50,1080i/60,1080p/50,
1080p/60, 1080p/24
Output signals
OUTPUT (MONITOR): composite video monitor-output terminal (RCA)
OUTPUT (MONITOR): L/R audio monitor- output terminal (RCA)
OUTPUT (HEADPHONE): L/R audio monitor- output terminal (Mini-pin)
OPTICAL OUT (Digital Audio) : PCM, Dolby® Digital
(RF input)
Input terminal / Receiving range
ANT: 75Ÿ Unbalanced / 44~870MHz
RF Video System
PAL B/G, H , I ,D/K
SECAM B/G , D/K , K1
NTSC-M
DVB-T
(RGB input)
Input terminals
Analog RGB input terminal (D-sub 15-pin)
Audio input terminal (3.5mm Stereo Mini Jack)*2
Input signals
0.7 V, analog RGB (Recommended Signal)
Sync signals
H/V separate, TTL level [2kŸ]
Ⴠ
The television takes at least 30 minutes to attain the status of optimal picture quality.
*12 S-Video input terminal is available for AV3 of L37X01AU only.
* This analog audio input terminal can be used for PC (RGB) or HDMI(DVI) 1~3 only.
55
PRODUCT SPECIFICATIONS (continued)
Signal Input
S-input connector pin specifications
Pin
Input signal
1
Y
2
Y-GND
3
C
4
C-GND
Frame
GND
HDMI connector Input pin specifications
Pin
Input signal
Pin
Input signal
1
T.M.D.S. Data2+
11
TMDS Clock Shield
2
T.M.D.S. Data2
12
TMDS Clock -
3
T.M.D.S. Data2-
13
CEC
4
T.M.D.S. Data1+
14
Reserved (N.C.)
5
T.M.D.S. Data1
15
SCL
6
T.M.D.S. Data1-
16
SDA
7
T.M.D.S. Data0+
17
DDC/CEC Ground
8
T.M.D.S. Data0
18
+5V Power
9
T.M.D.S. Data0-
19
Hot Plug Detect
10
T.M.D.S. Clock+
RGB terminal (D-sub 15-pin connector)
Pin
Input signal
1
R
2
G
3
B
4
No connection
5
No connection
6
R.GND
7
G.GND
8
B.GND
9
No connection
10
GND
11
No connection
12
[SDA]
13
H. sync
14
V.sync.
15
[SCL]
When different kinds of input signals are
simultaneously input to the television via a graphics
board or the like, the television only support H/V
separate sync signal.
56
PRODUCT SPECIFICATIONS (continued)
Recommended Signal List
With Component Video INPUT
Signal mode
No
Horizontal
frequency
Dot clock
frequency
(kHz)
(MHz)
Remarks
Signal
name
Resolution
Vertical
frequency
(Hz)
1
576i
720(1440) x 576
50.00
15.63
27.00
EIA-861D
2
480i
720(1440) x 480
59.94
15.73
27.00
EIA-861D
3
576p
720 x 576
50.00
31.25
27.00
EIA-861D
4
480p
720 x 480
59.94
31.47
27.00
EIA-861D
5
1080i/50
1920 x 1080
50.00
28.13
74.25
EIA-861D
6
1080i/60
1920 x 1080
60.00
33.75
74.25
EIA-861D
7
720p/50
1280 x 720
50.00
37.50
74.25
EIA-861D
8
720p/60
1280 x 720
60.00
45.00
74.25
EIA-861D
With HDMI INPUT
Signal mode
No
Horizontal
frequency
Dot clock
frequency
(kHz)
(MHz)
Remarks
Signal
name
Resolution
Vertical
frequency
(Hz)
1
VGA
640 x 480
59.94
31.47
25.18
EIA-861D
2
576i
720(1440) x 576
50.00
15.63
27.00
EIA-861D
3
480i
720(1440) x 480
59.94
15.73
27.00
EIA-861D
4
576p
720 x 576
50.00
31.25
27.00
EIA-861D
5
480p
720 x 480
59.94
31.47
27.00
EIA-861D
6
1080i/50
1920 x 1080
50.00
28.13
74.25
EIA-861D
7
1080i/60
1920 x 1080
60.00
33.75
74.25
EIA-861D
8
720p/50
1280 x 720
50.00
37.50
74.25
EIA-861D
9
720p/60
1280 x 720
60.00
45.00
74.25
EIA-861D
10
1080p/50
1920 x 1080
50.00
56.25
148.50
EIA-861D
11
1080p/60
1920 x 1080
60.00
67.50
148.50
EIA-861D
12
1080p/24
1920 x 1080
24.00
27.00
74.25
EIA-861D
57
PRODUCT SPECIFICATIONS (continued)
Recommended Signal List (continued)
With RGB input
Signal mode
No
Horizontal
frequency
Dot clock
frequency
(kHz)
(MHz)
Resolution
Vertical
frequency
(Hz)
640 x 400
70.09
31.47
25.18
2
640 x 480
59.94
31.47
25.18
3
800 x 600
60.32
37.88
40.00
1024 x 768
60.00
48.36
65.00
1280 x 1024
60.02
63.98
108.00
1280 x 768
59.88
47.78
79.50
1360 x 768
60.02
47.71
85.50
Signal
name
1
4
VGA
VESA
5
6
VESA
7
Remarks
Ⴠ The type of video board or connecting cable used may not allow for correct displays adjustment of Horizontal Position,
Vertical Position, Horizontal Clock and Clock Phase.
Ⴠ The unit differentiates the signal modes according to the horizontal and vertical frequencies and the horizontal and
vertical sync signal polarities. Note that different signals having all these elements alike may be handled as the same
signal.
With Multi Picture Function
Ⴠ 2-Picture
Sub
DTT
AV1,AV2
AV3, AV4
S-Video*1/
Composite
HDMI 1~3
TELETEXT
Component
TV
Main
DTT
–
O
–
O
O
–
TV
O
–
O
O
O
O
AV1, AV2
Component
–
–
–
O
O
–
AV3, AV4
Composite/S-Video*2
O
–
O
O
O
O*2
O
O
O
O
–
–
HDMI 1~3
*12 S-Video input terminal is available for AV3 of L37X01AU only.
* This is not available when NTSC signal is received, or no AV signal is detected.
(O: Available)
58