Zipato Zipamini User manual
Add to My manuals36 Pages
Zipato Zipamini is a smart home hub that lets you control and monitor your home from anywhere using your smartphone. With Zipamini, you can automate your lighting, climate, sun shading, irrigation, access, multimedia, video monitoring, and more. You can also receive notifications on your phone when certain events occur, such as when a door is opened or when motion is detected.
advertisement
ZIPAMINI
USER
GUIDE v1.2b
How can I manage all security issues with one easy, intuitive and efficient solution?
This guide describes how to install, program and operate Zipato’s
Zipamini.
02
ZIPAMINI
QUICK INSTALLATION GUIDE www.zipato.com
COPYRIGHT
© 2015 Tri plus grupa d.o.o. All Rights Reserved. Copyright by Tri plus grupa d.o.o.
No part of this manual may be reproduced or transmitted in any form without the expressed, written permission of Tri plus grupa d.o.o.
TRADEMARKS
Zipato and the Zipato logo are registered Trademarks.
All other product names mentioned herein may be trademarks or registered trademarks of their respective companies.
NOTICE
Although Zipato has attempted to ensure the accuracy of the content of this manual, it is possible that this document may contain technical inaccuracies, typographical, or other errors. Zipato assumes no liability for any error in this publication, and for damages, whether direct, indirect, incidental, and consequential or otherwise, that may result from such error, including, but not limited to loss of data or profits.
Zipato provides this publication “as is” without warranty of any kind, either express or implied, including, but not limited to implied warranties of merchantability or fitness for a particular purpose. The published information in the manual is subject to change without notice.
Zipato reserves the right to make changes in the product design, layout, and driver revisions without notification to its users.
www.zipato.com
ZIPAMINI
QUICK INSTALLATION GUIDE
03
02
ZIPAMINI
QUICK INSTALLATION GUIDE www.zipato.com
www.zipato.com
ZIPAMINI
QUICK INSTALLATION GUIDE
03
IMPORTANT SAFETY INFORMATION
To avoid contact with electrical current:
Never install an Ethernet connection in wet locations unless that connector is specifically designed for wet locations.
Do not place Ethernet wiring or connections in any conduit, outlet or junction box containing electrical wiring.
Installation of inside wire may bring you close to electrical wire, conduit, terminals and other electrical facilities. Extreme caution must be used to avoid electrical shock from such facilities. Avoid contact with all such facilities.
Ethernet wiring must be at least 2 m from bare power wiring or lightning rods and associated wires, and at least 15 cm from other wire (antenna wires, doorbell wires, wires from transformers to neon signs), steam or hot water pipes, and heating ducts.
ELECTROMAGNETIC COMPATIBILITY
When operated according to manufacturer instructions, the product complies with all applicable CE harmonised standards from EMC Directive 2004/108/EC and Part
15 of the FCC Rules. The connections conducting HF signals must not be damaged or altered in any way by the user.
04
ZIPAMINI
QUICK INSTALLATION GUIDE
CONTENTS
INTRODUCTION
PACKAGE CONTENTS
CONNECT THE ZIPAMINI
ACCOUNT CREATION AND REGISTRATION
ADDING DEVICES
REMOVING DEVICES
TROUBLESHOOTING
SPECIFICATIONS
LIMITED PRODUCT WARRANTY
DECLARATION OF CONFORMITY
www.zipato.com
19
19
20
23
05
12
13
15
25
30
www.zipato.com
ZIPAMINI
QUICK INSTALLATION GUIDE
05
04
ZIPAMINI
QUICK INSTALLATION GUIDE www.zipato.com
www.zipato.com
ZIPAMINI
QUICK INSTALLATION GUIDE
05
INTRODUCTION
Thank you for purchasing Zipamini. This guide describes how to install, program and operate your Zipamini. Zipamini makes every home smart by using advanced technology to hide the complexity of home networking - delivering a simple smart home. It plugs into any outlet in the home and automatically talks to all the connected devices in the house, connecting them to the cloud so that consumers can control them using tablets, smart phones, computers or TVs— at home or on the go. The Zipamini Gateway supports a variety of communication standards including Z-WAVE, ONVIF and IP.
Once configured, the gateway works stand-alone, but also features cloud support for advanced monitoring, messaging and programming services.
Intuitive graphical user interface allows customers to program their own home rules without any previous programming experience.
06
ZIPAMINI
QUICK INSTALLATION GUIDE
01
SECURITY
AND SAFETY
www.zipato.com
unlimited number of virtual alarms (partitions) up to 233 two-way, wireless zones trigger alarms in case of: intruder (motion sensors and door/window sensors), fire (smoke sensors), flood (water leakage sensors), gas (CO sensors) panic button, duress (if someone force you to disarm your system)
health care (in case of missing actions during particular time e.g. motion, door opening, laying on bed...) remote arm/disarm and status-info with any smartphone vandal proof - Zipamini is 24/7 monitored by central station which triggers alarm in case of connection loss include arm/disarm commands in automation scenes easy online setup and configuration through web based interface use of same sensors for security and automation purposes www.zipato.com
ZIPAMINI
QUICK INSTALLATION GUIDE
07
06
ZIPAMINI
QUICK INSTALLATION GUIDE www.zipato.com
www.zipato.com
ZIPAMINI
QUICK INSTALLATION GUIDE
07
02
LIGHTING
easy installation of wireless modules
Z-Wave lighting module pre-configured for even easier setup support remote dimming and on/off switching with any smartphone automatically turn lights on at sunset and off at sunrise unlimited number of scenes supported turn lights on during emergencies advanced event based rules configuration auto-pilot lighting programs to discourage intruders while home is empty
03
CLIMATE
multi-room heating and cooling control with any smartphone advanced programming scheduler online, accessible over web browser easily create unlimited number of custom zones (thermostats) multi-zone humidity control by using standard humidifiers and dehumidifiers use Internet weather feeds to program your home climate conditions create advanced event based rules to automate home climate based on other
08
ZIPAMINI
QUICK INSTALLATION GUIDE www.zipato.com
environmental and home events include climate control in automation scenes together with alarm, lighting, etc.
Notification and automated actions in case of overtemperature events, power outages, and other incidents…
04
SUN
SHADING
control blinds, roller-shutters, curtains and pergolas using any smartphone automate motors by using fun and easy programming add your sun shading commands into home scenarios together with lights, climate, alarms...
automate your shades to react to outside weather conditions easy installation using pre-configured wireless modules
05
IRRIGATION
control unlimited number of irrigation zones use advanced programming options online to setup perfect irrigation process automate irrigation system based on Internet weather forecast www.zipato.com
ZIPAMINI
QUICK INSTALLATION GUIDE
09
08
ZIPAMINI
QUICK INSTALLATION GUIDE www.zipato.com
www.zipato.com
ZIPAMINI
QUICK INSTALLATION GUIDE
09 integrate your irrigation scheme together with your complete home automation scenarios
06
ACCESS
remotely lock/unlock your door with any smartphone remotely open/close your garage door or gate over any smartphone get video notification when door is open use RFID tags to open doors and get detailed statistics automate doors/locks using scenarios and event based programming tool trigger automation events when door lock user codes are entered automatically unlock doors in the event of an emergency
07
MULTIMEDIA
remotely control your audio/video equipment with any smartphone automatically turn off A/V equipment at pre-set time or when room is unoccupied automatically turn on equipment to discourage intruders
10
ZIPAMINI
QUICK INSTALLATION GUIDE
08
VIDEO
MONITORING
www.zipato.com
access live and recorded video via the web and from any smartphone support for most of the available IP cameras – ONVIF support get email and SMS notifications with pictures and live video attached remotely adjust pan-tilt cameras create advanced event based recording and video notification rules
09
ENERGY
METERING
real-time monitoring energy consumption and notification right on smartphone compare energy usage and cost with others in the area automatically turn on/off your appliances in accordance with electricity prices see detailed analysis of your energy consumption save energy by automating lights, thermostats, sun shades...
www.zipato.com
ZIPAMINI
QUICK INSTALLATION GUIDE
11
10
ZIPAMINI
QUICK INSTALLATION GUIDE www.zipato.com
www.zipato.com
ZIPAMINI
QUICK INSTALLATION GUIDE
11
10
TECHNICAL
SUPPORT
HAVING TROUBLE INSTALLING YOUR NEW PRODUCT?
Zipato’s website contains the latest user documentation and software updates for
Zipato products and services.
www.zipato.com
You can also find answers in the Zipato Community at: community.zipato.com
Zipato Support: [email protected]
12
ZIPAMINI
QUICK INSTALLATION GUIDE www.zipato.com
PACKAGE CONTENTS
ZIPAMINI www.zipato.com
ZIPAMINI
QUICK INSTALLATION GUIDE
13
USER
GUIDE
5V/2A
ADAPTER
PLACEMENT
Make sure you place Zipamini on flat, non-metalic, non-slim surface. Also make sure
Zipamini is located at least 15 cm away from other electronic equipment, such as WiFi routers, plasma and LED TV’s, set-up boxes, etc.
IMPORTANT: Failure to comply will result in poor Z-Wave range, inability to join Z-Wave devices and other Z-Wave communication problems (offline devices).
12
ZIPAMINI
QUICK INSTALLATION GUIDE www.zipato.com
www.zipato.com
ZIPAMINI
QUICK INSTALLATION GUIDE
13
CONNECT THE ZIPAMINI
Your Serial number is mentioned in the package, please keep it safe as it will be required when registering your panel online.
CONNECT TO BROADBAND
Connect your Zipamini to your broadband router via the Ethernet cable.
The Ethernet port is located on the back of the Zipamini.
Zipamini queries your DHCP server for an IP address. If you do not have a DHCP server in your local network, after 60 seconds Zipamini will auto configure itself with link-local IPv4 address (in 169.254.0.0/16 range).
02 USB 1
03 USB 2
04 AV/OUT
06 HDMI
07 DC 5V
01
02
03
04
05
06
07
14
ZIPAMINI
QUICK INSTALLATION GUIDE www.zipato.com
www.zipato.com
Serial number
POWER UP
Plug the power adaptor into mains supply wall socket and the other end into control unit.
01 | PLUG IN POWER ADAPTOR
02 | ZIPAMINI READY: steady green light
Green LED Indicator
ZIPAMINI
QUICK INSTALLATION GUIDE
15
14
ZIPAMINI
QUICK INSTALLATION GUIDE www.zipato.com
www.zipato.com
ZIPAMINI
QUICK INSTALLATION GUIDE
15
ACCOUNT CREATION
AND REGISTRATION
ACCOUNT CREATION
To benefit from the Zipato monitoring and control service you will need to set up your
Zipato account and register your Zipamini. Upon registration you will automatically get the basic free level of monitoring service.
Open a browser window on your computer and go to the following URL: my.zipato.com
Click on “Sign Up!” button in the middle of the screen and fill out all required fields that will popup in the line below the “Sign Up!” button.
Fill out empty fields
Click on “Register”
Take note of your password during this process.
16
ZIPAMINI
QUICK INSTALLATION GUIDE www.zipato.com
Once you input registration data and click on register, the following message will pop up:
“Thank you for signing up!
Please check your e-mail for confirmation message.”
When this message appears check your email account. If there is no email please check spam container.
Email should look like this:
“Hi, your email here, welcome to the Zipamini!
To validate your email address please click on the following link verify.”
Once email is verified, login to Zipato by filing out credentials.
www.zipato.com
REGISTER YOUR ZIPAMINI
When you first time log in to your account, you need to enter serial number of your Zipamini. Serial number is located on the back of Zipamini and in “Zipabox” application (see picture on next page).
ZIPAMINI
QUICK INSTALLATION GUIDE
17
16
ZIPAMINI
QUICK INSTALLATION GUIDE www.zipato.com
www.zipato.com
ZIPAMINI
QUICK INSTALLATION GUIDE
17
In “Zipabox” application on your Android Zipato controller you will find:
Serial number
Indication strip (steady Green strip indication means that controller is online and ready)
Firmware version which installed on your controllerready)
IP address
MAC address
18
ZIPAMINI
QUICK INSTALLATION GUIDE www.zipato.com
www.zipato.com
Enter the serial number located at back of your Zipamini
Message appears saying “Allowed registration time elapsed”. Please restart
Zipamini and reenter serial number.
FINALIZE YOUR ACCOUNT
Your account is set up and you are able to use Zipato cloud system. Anyway, you need to ensure that your account is fully set up so you get the most from your Zipato account.
Make sure that you have fully completed your profile. To check and verify account details please see Users and Zipabox settings section in Zipato Control Center.
USERS
The Users section is where you add your family members which will have the rights to use your system. Adding a new user requires you to enter new user’s details and to give him/her certain rights. Rights management allows you to permit individual services for some users.
ZIPAMINI
QUICK INSTALLATION GUIDE
19
18
ZIPAMINI
QUICK INSTALLATION GUIDE www.zipato.com
ZIPAMINI
QUICK INSTALLATION GUIDE www.zipato.com
ADDING DEVICES
19
ADDING NEW Z-WAVE DEVICES
Before adding new device, it is recommended to bring device closer to Zipamini, so that no obstacle can interfere with operating range of device. Recommended distance between sensors and Zipamini is less than one meter. Read device instructions regarding inclusion/join mode. Device in inclusion/join mode is awake and ready for joining in to Zipato network. Always reset device before adding it to the network.
Device reset deletes any information about prior controller that was stored in device. At the end of joining or removing session it is recommended to synchronize everything and refresh Zipato Control Center.
01 | On Zipato dashboard, go to the “General” options and in “Device manager” click
“Add new device” button and follow wizard instructions.
02 | After you successfully add the device into your Zipato network go to “General”, select “Device manager”, click on the Network protocol of this device (e.g. Z-Wave) and set your device’s room name and type. This will help you to easier control your device.
REMOVING DEVICES
01 | Go to “General” options, select “Device manager”, Network protocol to which this device belongs (e.g. Z-Wave) and find this device;.
02 | Click on the trash can beside the device and in the popup window confirm deleting
03 | Click on the Synchronize button and refresh the Internet browser.
20
ZIPAMINI
QUICK INSTALLATION GUIDE www.zipato.com
TROUBLESHOOTING
Waiting for more than a five minutes and still there is no green LED light.
01 | Check your Internet connection
02 | Check whether you connected your network cable correctly to your Internet router.
I forgot my password
01 | Go to my.zipato.com
02 | Click “Forgot password” and follow screen instruction.
I have placed a device outside my house and it is not communicating with the
Zipamini. What’s happening?
If you have a lot of metal in the exterior construction of your home, this could significantly impede wireless communication. Metal is an insulator of radio signals. If your house has metal siding or a stucco finish over a metal mesh, you may have range problems on devices outside your home communicating with the Zipamini inside.
What should I do if I am having trouble installing my device?
If you are having difficulty with the physical installation of non-Zipato branded devices (Thermostats, GE switches, Blueline meter reader, etc.), please contact the manufacturer directly for assistance. If you are having trouble pairing a device to the www.zipato.com
ZIPAMINI
QUICK INSTALLATION GUIDE
21
20
ZIPAMINI
QUICK INSTALLATION GUIDE www.zipato.com
www.zipato.com
ZIPAMINI
QUICK INSTALLATION GUIDE
21
Zipamini, check the videos or other content on Zipato website for assistance.
Error “Allowed registration time elapsed”
Serial number must be entered within 2 min after turning on Zipamini. If not, message will appear saying “Allowed registration time elapsed”. This is done because security precaution. Allowed registration time starts ticking away after Zipamini establishes connection with the cloud server after power up/reset. So just reset your Zipamini, wait for the light to turn steady green, and the login into the cloud application and enter the serial number.
I have added device to Zipamini, but is not working properly?
If your device is not working properly try to reinstall it again. Make sure when adding new device that join procedure is completed. If join procedure is successful you will get message “Device joined” and Close button will appear.
What happens when adding new device is interrupted?
If device shows up in total devices window, delete it and then add this device again. If that device is not shown in total devices window just add this device again.
Do not forget to synchronize
When doing changes with your device like changing endpoint name, configuration or any change regarding devices and their endpoints, remember to click on synchronize.
Does Zipato offer a warranty?
22
ZIPAMINI
QUICK INSTALLATION GUIDE www.zipato.com
See the Limited Product Warranty for specifics of the Zipato service warranty.
PLACEMENT
Make sure you place Zipamini on flat, non-metalic, non-slim interface. Also make sure Zipamini is located at least 15 cm away from other electronic equipment, such as WiFi routers, plasma and LED TV’s, set-up boxes, etc.
IMPORTANT: Failure to comply will result in poor Z-Wave range, inability to join
Z-Wave devices and other Z-Wave communication problems (offline devices).
www.zipato.com
ZIPAMINI
QUICK INSTALLATION GUIDE
23
22
ZIPAMINI
QUICK INSTALLATION GUIDE www.zipato.com
ZIPAMINI
QUICK INSTALLATION GUIDE www.zipato.com
SPECIFICATIONS
23
SYSTEM
Dual Core ARM Cortex A7
DDR3 512M
NAND FLASH 4GB
PHYSICAL DIMENSION
101,6 (L) x 101,6 (W) x 22 (H) millimeters
NETWORK
Ethernet
Hotspot Wire to wireless
Wi-Fi WiFi 802.11 b/g/n
NETWORK
Home Automation
Energy Monitoring
Home remote control
Video surveillance and more…
OPERATING SYSTEM
Android 4.2
Linux Kernel - 3.0.8+
ACCESSORIES
5V/2A adapter
I/O
HDMI
Two USB ports
AV out
LAN port
TF card slot
DC-in
USER INTERFACE
Zipato Cloud automation API
Free iOS and Android applications
24
ZIPAMINI
QUICK INSTALLATION GUIDE
REGULATORY COMPLIANCE
(PENDING
)
Safety: UL
EMC: FCC, CE
RoHS
POTENTIAL APPLICATIONS
Home Automation
Energy Monitoring
Home remote control
Video surveillance and more… www.zipato.com
WARRANTY
1 year standard
Specifications are subject to change without prior notice www.zipato.com
ZIPAMINI
QUICK INSTALLATION GUIDE
25
24
ZIPAMINI
QUICK INSTALLATION GUIDE www.zipato.com
www.zipato.com
ZIPAMINI
QUICK INSTALLATION GUIDE
LIMITED PRODUCT
WARRANTY
25
GENERAL TERMS
Nothing in this Limited Product Warranty affects your statutory rights as a consumer.
The Limited Product Warranty set forth below is given by Tri plus grupa d.o.o.
(Europe) (herein referred to as “ZIPATO”). This Limited Product Warranty is only effective upon presentation of the proof of purchase. Upon further request by
ZIPATO, this warranty card has to be presented, too.
EXCEPT AS EXPRESSLY SET FORTH IN THIS LIMITED WARRANTY, ZIPATO MAKES
NO OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
ZIPATO EXPRESSLY DISCLAIMS ALL WARRANTIES NOT STATED IN THIS LIMITED
WARRANTY. ANY IMPLIED WARRANTIES THAT MAY BE IMPOSED BY LAW ARE
LIMITED IN DURATION TO THE LIMITED WARRANTY PERIOD.
TO THE EXTENT ALLOWED BY LOCAL LAW, THE REMEDIES IN THIS WARRANTY
STATEMENT ARE CUSTOMER’S SOLE AND EXCLUSIVE REMEDIES AGAINST ZIPATO.
THEY DO NOT, HOWEVER, AFFECT OR RESTRICT THE RIGHTS YOU HAVE AGAINST
THE BUSINESS YOU BOUGHT A ZIPATO PRODUCT FROM. IN NO EVENT WILL ZIPATO
BE LIABLE FOR LOSS OF DATA OR FOR INDIRECT, SPECIAL,
26
ZIPAMINI
QUICK INSTALLATION GUIDE www.zipato.com
INCIDENTAL, CONSEQUENTIAL (INCLUDING LOST PROFIT OR DATA), OR OTHER
DAMAGE, WHETHER BASED IN CONTRACT, TORT, OR OTHERWISE.
HOWEVER, NOTHING IN THIS AGREEMENT LIMITS ZIPATO’S LIABILITY TO YOU
(I) IN THE EVENT OF DEATH OR PERSONAL INJURY TO THE EXTENT RESULTING
FROM ANY FRAUDULENT MISREPRESENTATION ON THE PART OF ZIPATO, OR (III)
TO THE EXTENT ARISING UNDER PART 1 OF THE CONSUMER PROTECTION ACT
1987 OF THE UNITED KINGDOM. SOME STATES OR COUNTRIES DO NOT ALLOW:
(1) A DISCLAIMER OF IMPLIED WARRANTIES; (2) A LIMITATION ON HOW LONG AN
IMPLIED WARRANTY LASTS OR THE EXCLUSION; OR (3) LIMITATION OF INCIDENTAL
OR CONSEQUENTIAL DAMAGES FOR CONSUMER PRODUCTS. IN SUCH STATES OR
COUNTRIES, SOME EXCLUSIONS OR LIMITATIONS OF THIS LIMITED WARRANTY MAY
NOT APPLY TO YOU. THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS.
YOU MAY ALSO HAVE OTHER RIGHTS THAT MAY VARY FROM STATE TO STATE OR
FROM COUNTRY TO COUNTRY. YOU ARE ADVISED TO CONSULT APPLICABLE STATE
OR COUNTRY LAWS FOR A FULL DETERMINATION OF YOUR RIGHTS.
This Limited Product Warranty applies to ZIPATO branded hardware products
(collectively referred to as “ZIPATO Hardware Products”) sold by ZIPATO (Europe), its European subsidiaries, affiliates, authorized resellers, or country distributors
(collectively referred to as “ZIPATO Resellers”) with this Limited Product Warranty.
The term “ZIPATO Hardware Product” is limited to the hardware components and all its internal components including firmware. The term “ZIPATO Hardware Product”
DOES NOT include any software applications or programs.
www.zipato.com
ZIPAMINI
QUICK INSTALLATION GUIDE
27
26
ZIPAMINI
QUICK INSTALLATION GUIDE www.zipato.com
www.zipato.com
ZIPAMINI
QUICK INSTALLATION GUIDE
27
GEOGRAPHICAL SCOPE OF THE LIMITED PRODUCT WARRANTY
This Limited Product Warranty is applicable to Hardware Products sold by Zipato
Resellers in all countries listed at the beginning of this document under the heading
“Countries in which this ZIPATO Limited Product Warranty applies”. The Limited
Product Warranty will be honored in any country where ZIPATO or its authorized service providers offer warranty service subject to the terms and conditions set forth in this
Limited Product Warranty. However, warranty service availability and response times may vary from country to country and may also be subject to registration requirements.
LIMITATION OF PRODUCT WARRANTY
ZIPATO warrants that the products described below under normal use are free from material defects in materials and workmanship during the Limited Product Warranty
Period set forth below (“Limited Product Warranty Period”), if the product is used and serviced in accordance with the user manual and other documentation provided to the purchaser at the time of purchase (or as amended from time to time). ZIPATO does not warrant that the products will operate uninterrupted or error-free or that all deficiencies, errors, defects or non-conformities will be corrected. This warranty shall not apply to problems resulting from: (a) unauthorized alterations or attachments; (b) negligence, abuse or misuse, including failure to operate the product in accordance with specifications or interface requirements; (c) improper handling; (d) failure of goods or services not obtained from ZIPATO or not subject to a then-effective ZIPATO warranty or maintenance agreement; (e) improper use or storage; or (f) fire, water, acts of God or other catastrophic events. This warranty shall also not apply to any particular
28
ZIPAMINI
QUICK INSTALLATION GUIDE www.zipato.com
product if any ZIPATO serial number has been removed or defaced in any way. ZIPATO
IS NOT RESPONSIBLE FOR DAMAGE THAT OCCURS AS A RESULT OF YOUR FAILURE
TO FOLLOW THE INSTRUCTIONS FOR THE ZIPATO HARDWARE PRODUCT.
LIMITED PRODUCT WARRANTY PERIOD
The Limited Product Warranty Period starts on the date of purchase from ZIPATO. Your dated sales or delivery receipt, showing the date of purchase of the product, is your proof of the purchase date. You may be required to provide proof of purchase as a condition of receiving warranty service. You are entitled to warranty service according to the terms and conditions of this document if a repair to your ZIPATO branded hardware is required within the Limited Product Warranty Period. [Other than in respect of products for domestic use (in particular those listed in the first and last boxes in the table below), this Limited Product Warranty extends only to the original end user purchaser of this
ZIPATO Hardware Product and is not transferable to anyone who obtains ownership of the ZIPATO Hardware Product from the original end-user purchaser.
PRODUCT WARRANTY PERIOD TABLE
PRODUCT TYPE
PRODUCT WARRANTY PERIOD
Zipato Zipamini
One (1) year*
* Battery warranty period is 3 months
IMPORTANT: The content of “Product Type” listed above is subject to change; please refer to the www.zipato.com for latest update.
www.zipato.com
ZIPAMINI
QUICK INSTALLATION GUIDE
29
28
ZIPAMINI
QUICK INSTALLATION GUIDE www.zipato.com
www.zipato.com
ZIPAMINI
QUICK INSTALLATION GUIDE
29
PERFORMANCE OF THE LIMITED PRODUCT WARRANTY
If a product defect occurs, ZIPATO’s sole obligation shall be to repair or replace any defective Zipato Hardware Product free of charge provided it is returned to an
Authorized ZIPATO Service Centre during the Limited Warranty Period. Such repair or replacement will be rendered by ZIPATO at an Authorized ZIPATO Service Centre.
All component parts or hardware products that are replaced under this Limited
Product Warranty become the property of ZIPATO. The replacement part or product takes on the remaining Limited Warranty Period of the replaced part or product.
The replacement product need not be new or of an identical make, model or part;
ZIPATO may in its discretion replace the defective product (or any part thereof) with any reconditioned equivalent (or superior) product in all material respects to the defective product.
WARRANTOR
Tri plus grupa d.o.o.
Banjavciceva 11
10 000 Zagreb
CROATIA
TEL +385 (0)1 4004 404
FAX +385 (0)1 4004 405
30
ZIPAMINI
QUICK INSTALLATION GUIDE
DECLARATION OF
CONFORMITY
www.zipato.com
The Manufacturer Tri plus grupa d.o.o. hereby declares that the product:
Marketing model: Zipamini
Regulatory model: zbminitv.zweu.g
Trade/Brand name: Zipato is in conformity with the Low Voltage Directive 2006/95/EC, EMC Directive 2004/108/
EC and R&TTE Directive 1995/5/EC and carries the CE marking accordingly.
The following harmonized standards were applied:
EN 62311:2008 EN 300 328: V1.8.1
EN 301 489-1: V1.9.2 EN 300 220-1: V2.4.1
EN 301 489-3: V1.6.1 EN 300 220-2: V2.4.1
EN 301 489-17: V2.2.1 EN 60950-1:2006 + A11:2009 + A1:2010 + A12:2011 + A2:2013 www.zipato.com
ZIPAMINI
QUICK INSTALLATION GUIDE
31
30
ZIPAMINI
QUICK INSTALLATION GUIDE www.zipato.com
www.zipato.com
ZIPAMINI
QUICK INSTALLATION GUIDE
31
I hereby declare that the equipment named above has been designed to comply with the relevant sections of the above referenced specifications. The unit complies with all applicable Essential Requirements of the Directives.
PERSON RESPONSIBLE FOR THIS DECLARATION:
Sebastian Popovic, CEO
Changes or modifications not expressly approved Tri plus grupa d.o.o. for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
NOTE: Changes or modifications not expressly approved by Zipato for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment
32
ZIPAMINI
QUICK INSTALLATION GUIDE www.zipato.com
generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
www.zipato.com
ZIPAMINI
QUICK INSTALLATION GUIDE
33
32
ZIPAMINI
QUICK INSTALLATION GUIDE www.zipato.com
www.zipato.com
ZIPAMINI
QUICK INSTALLATION GUIDE
33
DISPOSING AND RECYCLING YOUR PRODUCT
This symbol on the product or packaging means that according to local laws and regulations needs to be disposed of separately from household waste. Once this product has reached the end of its life, please take it to a collection point (recycle facilites) designated by your local authorities, some will accept your product for free or simply drop it off at your Zipato re-seller store. By recycling the product and its packaging in this manner you help to conserve the environment and protect human health. At Zipato, we understand and are committed to reducing any impact our operations and products may have on the environment. To minimize this impact
Zipato designs and builds its products to be as environmentally friendly as possible, by using recyclable, low toxic materials in both products and packaging.
DISPOSING AND RECYCLING YOUR PRODUCT
© 2015 Tri plus grupa d.o.o. All Rights Reserved.
No part of this manual may be reproduced or transmitted in any form without the expressed, written permission of Tri plus grupa d.o.o.
34
ZIPAMINI
QUICK INSTALLATION GUIDE
NOTES
www.zipato.com
www.zipato.com
ZIPAMINI
QUICK INSTALLATION GUIDE
35
34
ZIPAMINI
QUICK INSTALLATION GUIDE www.zipato.com
www.zipato.com
ZIPAMINI
QUICK INSTALLATION GUIDE
35
36
ZIPAMINI
QUICK INSTALLATION GUIDE www.zipato.com
www.zipato.com
ZIPAMINI
QUICK INSTALLATION GUIDE
PB
make your home smart www.zipato.com
advertisement
Related manuals
advertisement