Mitsubishi Heavy Industries SRK35ZMP-S User's Manual

ORIGINAL INSTRUCTIONS
USER’S MANUAL
AIR-CONDITIONER
ENGLISH
MANUEL DE L’UTILISATEUR
FRANÇAIS
CLIMATISEUR
ANWENDERHANDBUCH
DEUTSCH
KLIMAGERÄT
ISTRUZIONI PER L’USO
SRK25ZMP-S
SRK35ZMP-S
SRK45ZMP-S
ITALIANO
CONDIZIONATORE D’ARIA
MANUAL DEL PROPIETARIO
ESPAÑOL
ACONDICIONADOR DE AIRE
GEBRUIKERSHANDLEIDING
NEDERLANDS
AIRCONDITIONING
MANUAL DO UTILIZADOR
PORTUGUÊS
APARELHO DE AR CONDICIONADO
ΟΔΗΓΙΕΣ ΧΡΗΣΗΣ ΕΛΛΗΝΙΚΑ
ΚΛΙΜΑΤΙΣΤΙΚΟ
РУКОВОДСТВО ПО ЭКСПЛУАТАЦИИ
РУССКИЙ
КОНДИЦИОНЕР ВОЗДУХА
KULLANIM KILAVUZU
TÜRKÇE
AIR-CONDITIONING & REFRIGERATION DIVISION
3-1, Asahi, Nishibiwajima-cho, Kiyosu, Aichi, 452-8561, Japan
http://www.mhi.co.jp
MITSUBISHI HEAVY INDUSTRIES AIR-CONDITIONING EUROPE, LTD.
7 Roundwood Avenue, Stockley Park, Uxbridge, Middlesex, UB11 1AX, United Kingdom
Tel : +44-20-7025-2750
Fax: +44-20-7025-2751
http://www.mhiae.com
MITSUBISHI HEAVY INDUSTRIES AIR-CONDITIONERS AUSTRALIA, PTY. LTD.
9C Commercial Road Kingsgrove NSW 2208
Tel : +61-2-8571-7977
Fax: +61-2-8571-7992
http://www.mhiaa.com.au
PO BOX 318 Kingsgrove NSW 1480
This air conditioner complies with EMC Directive 2004/108/EC,
LV Directive 2006/95/EC.
Este acondicionador de aire cumple con la directiva EMC: 2004/
108/EC, LV Directiva 2006/95/EC.
Ce climatiseur est conforme à la Directive EMC: 2004/108/EC, LV
Directive 2006/95/EC.
Deze airconditioner voldoet aan EMC Directive 2004/108/EC, LV
Directive 2006/95/EC.
Dieses Kimagerät erfüllt die EMC Direktiven 2004/108/EC, LV
Direktiven 2006/95/EC.
Este aparelho de ar condicionado está em conformidade com a
Directiva EMC 2004/108/EC e a Directiva LV 2006/95/EC.
Questo condizionatore d’aria è conforme alla Direttiva EMC: 2004/
108/EC, LV Direttiva 2006/95/EC.
∞˘Ùfi ÙÔ ÎÏÈÌ·ÙÈÛÙÈÎfi Â›Ó·È Û‡ÌʈÓÔ Ì ÙȘ ÚԉȷÁڷʤ˜ Ù˘
√‰ËÁ›·˜ EMC 2004/108/EK Î·È Ù˘ √‰ËÁ›·˜ LV 2006/95/EK.
RLC012A003A
RLC012A003A_Cover1-4
1
4/23/14, 17:32
Thank you for purchasing a MITSUBISHI HEAVY INDUSTRIES, LTD. Air-Conditioner. To
get the best long-lasting performance, please read and follow this User’s Manual carefully
before using your air-conditioner. After reading, please store the Manual in a safe place
and refer to it for operational questions or in the event of any irregularities.
This air-conditioner is intended for domestic use.
Do not vent R410A into the atmosphere: R410A is a fluorinated greenhouse gas,
covered by the Kyoto Protocol with a Global Warming Potential (GWP) = 1975.
ENGLISH
Your Air Conditioning product may be marked with this symbol. It means
that waste electrical and electronic equipment (WEEE as in directive 2012/
19/EU) should not be mixed with general household waste. Air conditioners
should be treated at an authorized treatment facility for re-use, recycling
and recovery and not be disposed of in the municipal waste stream. Please
contact the installer or local authority for more information.
This symbol printed in the batteries attached to your Air Conditioning
product is information for end-users according to the EU directive 2013/56/
EU article 20 annex II.
Batteries, at their end-of-life, should be disposed of separately from general
household waste. If a chemical symbol is printed beneath the symbol
shown above, this chemical symbol means that the batteries contain a
heavy metal at a certain concentration. This will be indicated as follows:
Hg:mercury(0.0005%) , Cd:cadmium(0.002%) , Pb:lead(0.004%)
Please, dispose of batteries correctly at your local community waste
collection or the recycling center.
The emission sound pressure level from each Indoor and Outdoor unit is under 70 dB(A).
contents
Safety precautions ........................................ 2
SLEEP TIMER operation ............................ 13
Name of each part and its function ............... 6
OFF-TIMER operation ................................ 13
Remote control handling ............................... 8
ON-TIMER operation .................................. 14
Operation failure with the remote control ...... 8
SLEEP TIMER + ON-TIMER operation ...... 14
Temporary run operation .............................. 8
PROGRAM TIMER operation ..................... 15
Operation and display section for remote
HIGH POWER/ECONOMY operation ......... 16
control ........................................................... 9
SELF CLEAN operation .............................. 17
Current time setting ....................................... 9
Auto restart function .................................... 17
AUTO mode operation ................................ 10
Tips for effective operation ......................... 17
Temperature adjustment during AUTO ....... 10
Maintenance ............................................... 18
FAN SPEED ................................................ 10
Proper installation ....................................... 19
COOL/HEAT/DRY/FAN mode operation .... 11
Troubleshooting .......................................... 20
Air-conditioner operable
Notice .......................................................... 20
temperature setting ..................................... 11
Contact your dealer ..................................... 21
Characteristics of HEAT mode operation ... 11
Self diagnosis function ................................ 22
Airflow direction adjustment ........................ 12
–1–
RLC012A002A_EN_001-022
1
7/22/14, 10:41
Safety precautions
• Before starting to use the system, please read these “Safety precautions” carefully to ensure
proper operation of the system.
• When you have read this instruction manual, please keep it without missing. If someone else
takes over as operator, make certain that the manual is also passed on to the new operator.
Improper handling could lead to drastic result like death, serious injury, etc.
CAUTION Might pose a serious problem, depending on the circumstances.
Please observe these precautions with great care, since they are essential to your safety.
• Symbols which appear frequently in the text have the following meaning:
WARNING
Strictly prohibited
Observe instructions
with great care
Provide proper earthing
❚ INSTALLATION PRECAUTIONS
WARNING
• The system is for domestic, residential etc. use.
If used in severer environments, such as an engineering workplace, the equipment
may function poorly.
• The system must be installed by your dealer or a qualified professional.
It is not advisable to install the system by yourself, as faulty handling may cause leakage of water, electric shock or fire.
CAUTION
• Do not install it where flammable gas may leak.
Gas leaks may cause fire.
• Depending on the place of installa• Make sure to install the drain hose
tion, an earth leakage breaker may be
properly so that all the water is
necessary.
drained out.
If you do not install an earth leakage
Improper installation may lead to water
breaker, you may get an electric shock.
drop in the room resulting in wet furniture.
• Make sure that the system has been properly earthed.
Earth cables should never be connected to a gas pipe, water pipe, lightning conductor
or telephone earth cable. Incorrect installation of the earth cable may produce an electric shock.
–2–
RLC012A002A_EN_001-022
2
4/8/14, 11:01
❚ Safety precautions
❚ OPERATION PRECAUTIONS
WARNING
• Children shall not play with the appli- • Cleaning and user maintenance shall
not be made by children without suance.
pervision.
• Do not expose yourself to the cooling
• Do not insert anything into the air inair for a long period.
let.
This could affect your physical condition
This may cause injury, as the internal fan
and cause health problems.
rotates at high speed.
• This appliance can be used by children aged from 8 years and above and persons
with reduced physical, sensory or mental capabilities or lack of experience and
knowledge if they have been given supervision or instruction concerning use of
the appliance in a safe way and understand the hazards involved.
• Store the remote control out of reach of infants.
Failure to observe this may result in the batteries being swallowed or other accidents.
CAUTION
• Only use approved fuses.
Use of steel or copper wire instead of an
approved fuse is strictly prohibited, as it
may cause a breakdown or fire.
• Do not handle the switches with wet
hands.
This may cause an electric shock.
• Do not swing from the indoor unit.
If the indoor unit falls down,you may get
injured.
• Do not place a flammable insecticide
or paint spray near the blower, nor
spray it directly on the system.
This may result in a fire.
• You should not expose any combustion appliance directly to the air
stream of the air-conditioner.
The appliance may then work inadequately.
• Do not wash the air-conditioner with
water.
This could cause an electric shock.
• The system should only be used for
its original purpose and not for anything else like, for instance, preservation of food, plants or animals, precision devices or works of art.
The system is only intended for use in
ordinary domestic rooms. Any other use
of the system may damage the quality
of food, etc.
• Do not place anything containing water, like vases, on top of the unit.
Water entering the unit could damage
the insulation and therefore cause an
electric shock.
• Do not install the system where the
airflow direction is aimed directly at
plants or animals.
This will damage their health.
• Do not sit on the outdoor unit nor put
anything on it.
If the unit falls down or things drop off it,
people could get hurt.
• After a long period of use, check the
unit's support structure from time to
time.
If you do not repair any damage right
away, the unit may fall down and cause
personal injury.
–3–
RLC012A002A_EN_001-022
3
4/8/14, 11:01
❚ Safety precautions
CAUTION
• Do not touch the aluminum fins on the
air heat exchanger.
It may result in injury.
• Do not place household electrical
appliances or household items under
neath the indoor or outdoor units.
Condensation falling from the unit may
stain objects and cause accidents or
electrical shock.
• Do not operate the system without
the air filter.
It can cause malfunction of the system
due to clogging of the heat exchanger.
• Do not shut off the power supply immediately after stopping the operation.
Wait at least 5 minutes, otherwise there
is a risk of water leakage or breakdown.
• Do not control the system with main
power switch.
It can cause fire or water leakage. In
addition, the fan can start unexpectedly,
which can cause personal injury.
• Do not pour liquid into this unit and do
not put water container on this unit.
Water entering the unit could damage
the insulation and therefore cause an
electric shock.
• If you operate the system together
with a combustion appliance, you
must regularly ventilate the indoor
air.
Insufficient ventilation may cause accidents due to oxygen deficiency.
• Stand firmly on a stepladder or other
stable object when removing the inlet
panel and filters.
Failure to observe this may result in
injury through insecure objects toppling
over.
• When you clean the system, stop the
unit and turn off the power supply.
Never open the panel while the internal
fan is rotating.
• Do not place objects near the outdoor unit or allow leaves to gather
around the unit.
If there are objects or leaves around the
outdoor unit, small animals may enter
unit and contact electrical parts and
may cause a break-down, smoke or fire.
• Contact your dealer to clean inside
the indoor unit, do not attempt to do
by yourself.
The use of a non-approved detergent or
improper washing method may damage
the unit’s plastic components and cause
leaks. Damage, smoke, or fire may also
happen if the detergent comes in contact with electrical parts or the unit’s
motor.
• Stop the unit and turn off the power if
you hear thunder or there is a danger
of lightning.
It may damage the unit.
• Do not let the foreign matters enter
the indoor unit through the air outlets.
This may cause the dumper inoperable.
• If the power cord becomes damaged,
contact your dealer or a qualified engineer.
If it is not replaced, it may cause a
breakdown or fire.
–4–
RLC012A002A_EN_001-022
4
4/8/14, 11:01
❚ Safety precautions
❚ PRECAUTIONS FOR RELOCATION OR REPAIRS
WARNING
• Do not perform any repairs or modifications by yourself. Consult the dealer if
the unit requires repair.
If you repair or modify the unit, it can cause water leaks, electric shocks or fire.
• Consult your dealer for repairs.
Wrong repairs could cause an electric
shock, fire, etc.
• In case the air-conditioner is relocated elsewhere, contact your dealer
or a professional fitter.
Faulty installation may cause water
leakage, electric shock, fire, etc.
• If you notice anything abnormal
(smell of burning, etc.), stop the
system, turn off the power supply
and consult your dealer.
Continued use of the system in abnormal circumstances may result in malfunctioning, electric shock, fire, etc.
• If the air-conditioner fails to cool or
warm the room, it may have a refrigerant leakage. Contact your dealer.
If refrigerant needs to be added,
check with your dealer for proper
instructions.
If the refrigerant comes in contact with
the bare skin, it may cause cold injury.
If the refrigerant gas is inhaled excessively, it may cause deterioration of nerve
function like dizziness and headache, or
deterioration of heart function like irregular heartbeat and heart palpitation temporarily. If refrigerant unexpectedly leaks
from the unit onto a fan heater, stove,
hotplate or other heat source, harmful
gases could be generated.
–5–
RLC012A002A_EN_001-022
5
4/8/14, 11:01
Name of each part and its function
INDOOR UNIT
Air filter
Remove dust or dirt from the inlet air.
Page 18
Indoor unit fan
Air-cleaning filter
Heat exchanger
Front panel
Unit display section
Page 7
Room temperature sensor
Air outlet
Air blows out of here.
Left/right airflow direction adjustment louver
Page 12
Up/down airflow direction adjustment flap
Page 12
Drain hose
Drains water from the indoor unit.
Refrigerant piping connection and electric wire
OUTDOOR UNIT
Air inlet
(On side & rear surface)
Air outlet
Outdoor unit fan
Heat exchanger
–6–
RLC012A002A_EN_001-022
6
4/8/14, 11:01
Name of each part and its function
Unit display section
Remote control signal receiver
Unit ON/OFF button
This button can be used for turning on/off the unit when remote control is not available.
Page 6
RUN (HOT KEEP) light (green)
• Illuminates during operation.
• Blinks when airflow stops due to the ‘HOT KEEP’ and ‘CLEAN operation’.
1.5 sec.
HOT KEEP
3 sec.
ON
ON
CLEAN operation
OFF
OFF
0.5 sec.
1 sec.
Page 17
TIMER light (yellow)
Illuminates during TIMER operation.
Wireless remote control
Wireless remote
control holder
Battery
(R03 (AAA, Micro) x2)
Wood screw (Quantity:2)
(for remote control holder mounting)
NOTE
•
Buzzer sound for remote control
When preset temperature 24°C, automatic operation and automatic airflow are selected, the buzzer sound (PiPi) is produced.
When turning off the air conditioner by pressing ON/OFF button (except CLEAN mode), the buzzer sound (Pi) is produced.
This function is useful for operating the air conditioner in the darkness.
Air flow setting
Preset temperature
–7–
RLC012A002A_EN_001-022
7
4/8/14, 11:01
Remote control handling
Replacing the batteries
The following cases signify exhausted batteries. Replace old batteries with new ones.
• Receiving beep is not emitted when a signal is transmitted.
• Display fades away.
NOTE
1
2
Pull out the cover and take
out old batteries.
• Do not use old and new batteries together.
• Remove the batteries when the remote control is not used for a long period.
• The recommended effective period of a battery conforming to JIS or IEC should
be 6 to 12 months with normal use. If used longer, or when an unspecified
battery is used, liquid may leak from the battery, causing the remote control to
malfunction.
• The recommended effective period is printed on the battery. This may be
shorter due to manufacturering time to the unit. However, the battery may
still be in working order after expiry of its nominal life.
Insert new batteries. R03
(AAA, Micro) x2
Pay attention to
the ª and ·
marks
■ When the display shows any abnormal condition, Press the ACL switch with
the tip of a ballpoint pen.
Using the remote control holder
3
4
Close the cover.
The remote control can be attached to a wall or pillar
by using a remote control holder. Before installing the
remote control, check that the air-conditioner receives
the signals properly.
Press the ACL switch with
the tip of a ballpoint pen.
For installing or removing the remote control, move it
up or down in the holder.
The timer setting mode is displayed.
Page 9
Warning note for remote control handling
Strictly prohibited
• Do not go near high temperature
places, such as an electric carpet
or stove.
• Do not leave the remote control exposed to direct sunlight or other
strong lighting.
• Do not drop the remote control.
Handle with care.
• Do not put any obstructing obstacles between the remote control
and the unit.
• Do not spill any liquid on the
remote control.
• Do not place heavy objects on the
remote control, or step on it.
Operation failure with the remote control
• Are the batteries running down?
• If the operation fails, operate the unit
with temporary operation function.
Contact your dealer to have the remote control
Replace the batteries with new ones and retry the operation. checked.
Below
“Replacing the batteries” above.
Temporary run operation
• The unit ON/OFF button on the unit operates ON/OFF temporarily when the remote control is not used.
Operation program
• OPERATION MODE : AUTO
• FAN SPEED
:
AUTO
• AIR FLOW
:
AUTO
• Operation starts by pressing the unit ON/OFF button; it stops if you press
the button again.
Unit ON/OFF button
NOTE
• Do not hold the Unit ON/OFF button down for more than 5 seconds.
(Holding it down longer than 5 seconds sets the automatic cooling used during servicing or when relocating the air-conditioner.)
–8–
RLC012A002A_EN_001-022
8
4/8/14, 11:01
Operation and display section for remote control
Operation section
FAN SPEED button
OPERATION MODE select button
Each time the button is pressed, the
display is switched over in turn.
Each time the button pressed, the
display is switched over in turn.
Page 10, 11
Page 10
ON/OFF (luminous) button
HI POWER/ECONO button
Press to start operation, press again to
stop.
This button changes the HIGH POWER/
ECONOMY mode.
Page 16
AIR FLOW (UP/DOWN) button
This button changes the air flow (up/down)
direction.
Page 12
TEMPERATURE button
These buttons set the room temperature.
(These buttons are used for setting the
current time and timer function as well.)
ON TIMER button
This button selects ON TIMER operation.
Page 14
SLEEP button
OFF TIMER button
This button selects SLEEP operation.
This button selects OFF TIMER operation.
Page 13
Page 13
ACL switch
CLEAN switch
This switch is for resetting microcomputer
and setting time.
Page 8
This switch selects the CLEAN mode.
Page 17
• The above illustration shows all controls, but in practice
only the relevant parts are shown.
CANCEL button
This button cancels the ON timer, OFF
timer, and SLEEP operation.
Transmission procedure
When each button on the remote control is pressed – with the remote control pointing towards the air-conditioner unit a signal is transmitted.
When the air-conditioner receives the signal correctly, it will beep.
Current time setting
■ When inserting the batteries, the current time is automatically set to time setting mode.
13:00 is displayed as the current time. Set the clock to the right time.
Example: Set to 10:30.
1
Press the ACL switch.
2
Press the
Press with the tip of a ballpoint pen, etc.
The time display blinks and can be set to the current time.
or
button.
(Set to 10:30)
3
Press the ON/OFF button.
The display changes from blinking to steady lighting and the setting is complete.
Make sure to press the button within 60 seconds from the last operation in
step 2, otherwise the time is not set.
NOTE
• The timer operation works based on the time clock, so please set it correctly.
• The remote control data is reset when the present time is set.
–9–
RLC012A002A_EN_001-022
9
4/8/14, 11:01
AUTO mode operation
■ Automatically selects the operation mode (COOL, HEAT, DRY) depending on the room temperature when switched on.
When the unit is not in AUTO mode:
1
Press MODE button.
Move the [
mark] to the
(Auto) position.
Point the remote control toward the air-conditioner, and
2
Press the ON/OFF button.
To stop:
Press the ON/OFF button.
NOTE
• In case air is not blowing out during the operation.
Page 20
• If you do not want the AUTO mode program, change
to COOL, HEAT, DRY or FAN instead of AUTO.
Display in OFF status
• The current time and preset OPERATION MODE are displayed while the
air conditioner is turned off.
Page 11
• Airflow direction adjustment procedure.
Page 12
Temperature adjustment during AUTO
■ Air temperature adjustment is possible even during automatic operation. There are 6 levels of adjustment possible with the
During automatic operation, 24°C is preset both for heating and cooling.
button or the
button.
When a change in temperature is required.
1
Press the
or
button.
When it is a little cold
Press the
button.
■ Each time the
button is pressed, the switch over occurs in the following order
–6 → –5 → ............ –1 → ±0 → +1 ............ +6.
When +6 is indicated, even if the
button is pressed, the indicator does not change.
When it is a little hot
Press the
button.
■ Each time the
button is pressed, the switch over occurs in the following order
+6 → +5 → ............ +1 → ±0 → –1 ............ –6.
When –6 is indicated, even if the button is pressed, the indicator does not change.
-6
Setting
temp.(°C) 18
-5
19
-4
20
-3
21
Remote Control display
+0 +1
-2
-1
+2
22 23
24 25
26
+3
27
+4
28
+5
29
FAN SPEED
■ You can choose the capacity of your air-conditioner
when heating mode, cooling mode or fan mode.
Operation capacity by your choice
FAN SPEED
Set automatically by microcomputer
Powerful operation with high capacity
Standard operation
Energy-saving operation
AUTO
HI
MED
LO
Press the FAN SPEED button.
Move the [
AUTO
mark] to the preferred fan speed position.
HI
MED
NOTE
• When changing FAN SPEED from HI to LO, the sound of
refrigerant flowing may be heard.
– 10 –
RLC012A002A_EN_001-022
10
LO
4/8/14, 11:01
+6
30
COOL/HEAT/DRY/FAN mode operation
Point the remote control toward the air-conditioner, and
1
Press the MODE select button.
Move the [
(Cool),
2
3
mark] to the required operation position.
(Heat),
(Dry),
(Fan)
Press the ON/OFF button.
Press the TEMP button.
Press
or
button for the preferred temperature.
Recommendation
4
Airflow direction adjustment procedure.
Press the FAN SPEED button
Set the fan speed as preferred.
Page 12
NOTE
To stop:
Press the ON/OFF button.
• In case air is not blown out, when starting the heating operation.
Page20
• The operation program can also be set or changed when
the air-conditioner is not in operation.
Air-conditioner operable temperature setting
■ Use within the following operational range. Operating outside of this range may result in the protection devices being activated,
preventing the unit from working.
Cooling operation
Heating operation
Outside temperature Approximately -15 °C to 46 °C
Approximately -15 to 24 °C
Inside temperature Approximately 18 to 32 °C
Approximately 15 to 30 °C
Inside humidity
Below approximately 80%
The long-term use of the unit with a humidity level
exceeding 80% may result in condensation forming
on the surface of the indoor unit, leading to water drips.
—
Characteristics of HEAT mode operation
Mechanism and capacity of HEAT mode operation
■ Mechanism
• The unit draws heat from the cold outside air, transfers it to indoors and heats the room. As a characteristic of heat pump system, the
heating capacity reduces when the outside air temperature gets colder.
• It may take some time to supply hot air after turning on the air-conditioner.
• If the outside temperature becomes extremely low, it would be better to use an additional source of heating.
Defrosting
If the outside temperature becomes low and humidity is high, the heat exchanger in the outdoor unit may frost over, which prevents
efficient heating.
If this happens, the automatic defrost function is activated and during defrosting the heating operation stops for 5 to 15 minutes
during defrosting.
• Both indoor and outdoor fans stop and the RUN light blinks slowly (1.5 sec. ON, 0.5 sec. OFF) during defrosting.
• The outdoor unit may give off some steam during defrosting. This is to help the defrosting process and is not a defect.
• The HEAT operation resumes as soon as defrosting has been completed.
– 11 –
RLC012A002A_EN_001-022
11
4/8/14, 11:01
Airflow direction adjustment
Adjusting airflow direction
■ Up/down direction can be adjusted with the AIRFLOW button on the remote control. Every time you press this button the mode
changes as follows:
Change on AIRFLOW (UP/DOWN) mode.
(Flap stopped)
(Swing)
NOTE FOR HEATING OPERATION
• When operation starts, the flap direction is fixed at the horizontal position in order to avoid cold draft, and return to the set the position that was set
after the warm air supply is starting.
• The flap direction will be controlled to the horizontal position when the room temperature reaches the set temperature and compressor stops or when
defrosting is in operation.
• The airflow direction cannot be set during the period mentioned above. Change the airflow direction settings after the warm air is supplied and the
flap goes to the set position.
MEMORY FLAP (FLAP STOPPED)
When you press the AIRFLOW button once while the flap is operating, it stops swinging at the
position. Since this angle is memorized in the microcomputer, the flap will automatically be set
at this angle when the next operation is started.
• Recommended angle of the flap when stopping
WARNING
• Do not expose directly to airflow from the air-conditioner for a long time.
CAUTION
• When in COOL or DRY operation, do not operate for a long period with the
airflow blowing straight down. Otherwise, condensation may appear on
the outlet grill and drip down.
• Do not try to adjust the flaps by hand, as the control angle may change or
the flap may not be closed completely.
HEAT
COOL, DRY
Adjusting left/right air flow direction
■ Adjust the direction by moving the left/right louver by hand.
When you adjust the direction, touch the operation point of louver.
Operation point
Louver
Flap
CAUTION
• Please stop the air conditioner when adjusting the air flow direction.
– 12 –
RLC012A002A_EN_001-022
12
4/8/14, 11:01
(Slant forward
blowing)
(Horizontal
blowing)
SLEEP TIMER operation
■ The unit stops automatically after the set time lapses.
The set temperature is automatically adjusted according to the elapsed time in order to avoid too much cooling or heating.
1
Page 15
Press the SLEEP button.
■ If it is pressed while the unit is off
SLEEP TIMER operation starts with the previous operation settings, and the air
conditioning is turned off after the set time elapses.
■ If it is pressed while the unit is running
The air conditioner is turned off after the set time elapses.
Every time the button is pressed, the display changes as follows:
... (Units of one hour)
No indication
(canceled)
Example: You prefer it to stop after 7 hours.
Set to
The timer light (yellow) is on.
h
• The unit stops after the set time lapses.
Changing of set time
Set a new time by pressing SLEEP button.
NOTE
How to cancel
Press the CANCEL button to turn off the SLEEP
display.
• Cannot be set at the same time with OFF-TIMER.
OFF-TIMER operation
■ The unit stops automatically when the set time comes.
With the air conditioner turned off, start the operation from Step 1. With the air conditioner running, start from Step 2.
Example: You prefer it to stop 22:30.
1
2
3
Press the ON/OFF button.
Press the OFF TIMER button.
OFF TIMER display
is blinking.
Press the
button.
Every time the
0:00
0:10
Every time the
or
button is pressed, the display is switched in the order of:
0:20
...
1:00
1:10
(Units of ten minutes)
button is pressed, the display is switched in the order of:
0:00 23:50 23:40 ... 23:00 22:50
(Units of ten minutes)
Set at 22:30.
4
Changing of set time
Press the OFF TIMER button.
The display changes from blinking to steady lighting and the setting is complete.
The timer light (yellow) is on.
NOTE
Set a new time by using the OFF TIMER button.
How to cancel
Press the CANCEL button to turn off the timer
display.
• The unit stops at the end of the set period of time.
• Make sure to press the button within 60 seconds from the last operation in
step 3, otherwise the setting is not completed.
• The current time is not displayed during OFF-TIMER operation.
• Different from SLEEP TIMER operation, automatic set temperature adjustment is not done during OFF-TIMER operation.
– 13 –
RLC012A002A_EN_001-022
13
4/8/14, 11:01
ON-TIMER operation
■ Operation starts 5 to 60 minutes before the set time so that the room temperature reaches the optimum temperature at the set time.
ON-TIMER operation can be set regardless of whether the air-conditioner is running or not.
Page 15
Example: In the case the preferred room temperature is required at 8:00.
1
2
Press the ON-TIMER button.
ON TIMER display
Press the
Every time the
0:00
0:10
Every time the
is blinking.
or
button.
button is pressed, the display is switched in the order of:
0:20
...
1:00
1:10
(Units of ten minutes)
button is pressed, the display is switched in the order of:
0:00 23:50 23:40 ... 23:00 22:50
(Units of ten minutes)
Set at 8:00.
3
Changing of set time
Press the ON TIMER button.
The display changes from blinking to steady lighting and the setting is complete.
The timer light (yellow) is on.
The operation stops if it is set during operation.
NOTE
Set a new time by using the ON-TIMER button.
How to cancel
Press the CANCEL button to turn off the timer
display.
• Operation starts 5 to 60 minutes before the set time.
• The timer light (yellow) goes out at the set time.
• Make sure to press the button within 60 seconds from the last operation in step
2, otherwise the setting is not completed.
• The current time is not displayed during ON-TIMER operation.
SLEEP TIMER + ON-TIMER operation
■ Combined timer operation of SLEEP TIMER and ON TIMER.
Example: When it is required to stop after 3 hours and then start operation at
8:00, near the set temperature.
■ SLEEP TIMER setting
Set by the procedures on page 13.
Set to
■ ON TIMER operation setting
Set by the above procedure mentioned in ON TIMER.
Set to
The setting of the lighting of the timer light (yellow) of this unit is complete.
h
• After the SLEEP TIMER set time has elapsed, the operation stops, and
it starts from 5 to 60 minutes before the ON TIMER’s set time.
• The timer light is turned off when ON TIMER set time comes.
Changing of set time
How to cancel
Set a new time by using the SLEEP or ON TIMER button.
Press the CANCEL button to turn off the timer display.
– 14 –
RLC012A002A_EN_001-022
14
4/8/14, 11:01
PROGRAM TIMER operation
■ The timer operations of the combination of ON and OFF TIMER. Once this has been set the timer operations will be repeated at the
same time every day unless the ON/OFF button is pressed.
Example: When it is prefered to stop at 22:30, and then start operation at 8:00,
near the set temperature.
■ OFF TIMER operation setting
Set by the procedures on page 13.
Set to
■ ON TIMER operation setting
Set by the procedures on page 14.
Set to
Timer light (yellow) on the unit will light when the setting is completed.
The set time will be displayed on the remote control unit. The display will
change depending on the operational status.
With ON TIMER, the air conditioner starts running.
Then, with OFF TIMER, the air conditioner stops running.
With OFF TIMER, the air conditioner stops running.
Then, with ON TIMER, the air conditioner starts running.
Changing of set time
Set a new time by using the OFF TIMER or ON TIMER button.
How to cancel
Press the CANCEL button to turn off the timer display.
Comfort Start-up
SLEEP TIMER
▼
▼
In ON TIMER operation, the unit starts the operation a little earlier, so
that the room can approach optimum temperature at ON time. This is
so called “Comfort start-up”.
• Mechanism
The room temperature is
In COOL operation
checked 60 minutes before the
(Stop) Operation starts
ON time. Depending on the
temperature at that time, the
operation starts 5 to 60 minutes
(Operation)
before the timer is at ON.
• The function is available for both Set temperature
COOL and HEAT operation
mode (including AUTO). It does
Check the room Set time
not work for DRY mode.
temp. 60 mins.
before.
When SLEEP TIMER is selected, the set temperature is automatically
adjusted after a while, ensuring that the room is not too cold during
cooling or too warm during heating.
• During cooling : The preset temperature is lowered by 1°C at the
start of SLEEP operation (when the timer is set). After that, the temperature goes up by 1°C every an hour to become 1°C higher than
the present temperature.
• During heating: The preset temperature is lowered by 1°C at the
start of SLEEP operation (when the timer is set). After that the temperature becomes 3°C lower in an hour and 6°C lower in two hours
than the present temperature.
– 15 –
RLC012A002A_EN_001-022
15
4/8/14, 11:01
HIGH POWER/ECONOMY operation
If the air-conditioner is not operating, point the remote control toward the air conditioner, and
1
2
Press the ON/OFF button.
Press the HI POWER/ECONO button.
• When the operating mode is AUTO, COOL or HEAT
Every time the HI POWER/ECONO button is pressed, the display is
switched in the order of:
No display
(HIGH POWER)
(ECONOMY)
(Normal operation)
• When the operating mode is DRY or PROGRAM TIMER
Every time the HI POWER/ECONO button is pressed, the display is
switched in the order of:
No display
(Normal operation)
(ECONOMY)
Concerning HIGH POWER operation
Pressing the HI POWER/ECONO button intensifies the operating power and initiates powerful cooling or heating operation for 15
minutes continuously. The remote control
displays and the FAN SPEED display disappears.
NOTE
• During the HIGH POWER operation, the room temperature is
not controlled. When it causes an excessive cooling or heating,
press the HI POWER/ECONO button again to cancel the HIGH
POWER operation.
• HIGH POWER operation is not available during the DRY and
the program timer operations.
• When HIGH POWER operation is set after ON TIMER operation,
HIGH POWER operation will start from the set time.
• When the following operations are set, HIGH POWER operation
will be canceled.
1 When the HI POWER/ECONO button is pressed again.
2 When the operation mode is changed.
3 When it has been 15 min. since HIGH POWER
operation has started.
• Not operable while the air conditioner is OFF.
Concerning ECONOMY operation
Pressing the HI POWER/ECONO button initiates a soft operation with the power suppressed in order to avoid an excessive cooling or
heating. The unit operates 1.5°C higher than the setting temperature during cooling or 2.5°C lower than that during heating. The
displays and the FAN SPEED display disappears.
remote control
NOTE
• It will go into ECONOMY operation at the next time the airconditioner runs in the following case.
1 When the air-conditioner is stopped by ON/OFF button
during ECONOMY operation.
2 When the air-conditioner is stopped in SLEEP or OFF
TIMER operation during ECONOMY operation.
3 When the operation is retrieved from CLEAN operation.
• When the following operations are set, ECONOMY operation
will be canceled.
1 When the HI POWER/ECONO button is pressed
again.
2 When the operation mode is changed from DRY to
FAN.
• Not operable while the air conditioner is OFF.
– 16 –
RLC012A002A_EN_001-022
16
4/8/14, 11:01
SELF CLEAN operation
■ CLEAN operation should be run after AUTO, COOL and DRY operation to remove the moisture from inside the indoor unit and control
the growth of mold and bacteria.
1
In order to active CLEAN operation, press the CLEAN
switch with the tip of a ballpoint pen.
Every time the CLEAN switch is pressed, the display is
switched in the order of:
No display
(CLEAN off)
(CLEAN on)
NOTE
• Two hours later, the air conditioner stops running automatically. To stop
the air conditioner immediately, press the ON/OFF button.
• CLEAN operation is not operated after HEAT, FAN, OFF-TIMER and
SLEEP operations have finished.
• The indoor unit fan runs for about two hours in CLEAN operation.
• The RUN light illuminates during CLEAN operation.
3 sec.
ON
OFF
1 sec.
• Pressing the SLEEP button during CLEAN operation cancels the CLEAN
operation and then the unit is set to SLEEP operation.
• This is not a function for removing mold, germs or grime that have already adhered to the unit.
Auto restart function
■ What is auto restart function?
• Auto restart function records the operational status of the air-conditioner immediately prior to be switched off by a power cut, and then
automatically resumes operations after the power has been restored.
• The following settings will be canceled:
1 Timer settings
2 HIGH POWER operations
NOTE
• Auto restart function is set at on when the air-conditioner is shipped from the factory. Consult with your dealer if this function needs
to be switched off.
• When power failure occurs, the timer setting is canceled. Once power is resumed, set the timer again.
Tips for effective operation
■ Please observe the following for the most economic and comfortable use of your unit.
Set a suitable room temperature.
Clean the filter frequently.
Avoid direct sunlight and draught.
Excessively high or low temperatures
are not good for your health and waste of
electricity.
Clogged filter may block the airflow and
cause less efficient operation.
Cut out direct sunlight by drawing the curtains or blinds when cooling. Keep windows
and doors shut, except when ventilating.
Adjust the airflow direction properly.
Operate the unit only when needed.
Keep heat source away when cooling.
Adjust the up/down and left/right airflow
to ensure a steady room temperature.
Use the timer properly to operate the unit
only when needed.
Keep heat sources out of the room as
much as possible.
– 17 –
RLC012A002A_EN_001-022
17
4/8/14, 11:01
Maintenance
Carefull matter during maintenance
Turn off the power
supply.
• Do not spill any liquid.
Wipe the unit with a
soft, dry cloth.
Do not use the following articles:
There's a danger
of electric shock.
• Hot water (40°C or more)
It may deform or discolour the unit.
• Petrol, paint thinner, benzine or cleanser, etc.
They may deform or scratch the unit.
• Do not touch the aluminum fins on
the heat exchanger.
• Stand firmly on a stepladder or other
stable object when removing the filter.
During the operational season
1
Cleaning the air filter
Recommendation interval is once every two week
• Hook fingers on this side of the top face of air filter.
Pull the air filter forward.
The air filter will separate from front panel.
CAUTION
• When removing the air filter, pull it out gently
without tilting and with care not to shake off dirt
accumulated on the air filter.
• Be careful not to allow dirt shaken off the air filter
entering in the eyes or mouth.
2
Cleaning
Remove dirt from the air filter using a vacuum cleaner.
If the filter is very dirty, clean it with warm water (approx.
30°C), and dry it thoroughly.
CAUTION
• Do not clean the filter with boiling water.
• Do not dry them over an open flame.
• Pull them out gently.
3
Reinstall the air filter
• Insert the air filter's ditch to the rail of the front
panel and push it in the back.
Rail (both side)
CAUTION
Ditch (both side)
• Operating without putting back the air filter will
make the unit dusty, and may cause damage.
Cleaning the unit
• Wipe the unit with a soft, dry cloth, or use a vacuum cleaner.
• If the unit is very dirty, wipe it with a cloth soaked in warm water.
– 18 –
RLC012A002A_EN_001-022
18
4/8/14, 11:01
NOTE
Cooling/heating is affected by an air filter clogged up with dust etc., and the operation noise becomes louder. It
may also use extra electricity. Please clean the air filter at recommendation intervals.
At the end of the season
1
Perform the fan operation for a half day.
2
Stop the unit and turn off the power supply.
3
4
5
Clean and reinstall the air filter.
At the beginning of the season
Dry the inside of the unit.
Cooling season only.
The unit consumes approx. 2W even when the unit is not operating. Turning off the power supply will help saving energy consumption and cost.
Clean both the indoor and outdoor units.
Remove batteries from the remote control.
1
Make sure that there are no obstacles blocking the airflow around the air intake and outlet
openings of the indoor and outdoor units.
2
3
4
5
6
Check if there is no corrosion or rust on the
base frame of the outdoor unit.
Ensure that the earth wiring is not snapped
nor disconnected.
Ensure that the air filter are clean.
Turn on the power supply.
Insert batteries in the remote control.
Proper installation
Suitable installation position
• Do not put any obstruction in front of the indoor unit, preventing proper ventilation and functioning.
• Do not install the unit in any of the following places:
• Where there is a danger of leaking flammable gases.
• Where there is substantial splashing of oil.
• Malfunctioning due to corrosion may occur if the unit is installed in a spa where sulfide gases are generated, or in a seaside resort
exposed to sea breezes. Contact your dealer.
• The air-conditioner and remote control must be at least 1 metre away from a TV set or radio.
• Drain the dehumidified liquid from the indoor unit into a spot that drains well.
Pay attention to operating noises!
•
•
•
•
When you install the unit, take care to choose a place that can comfortably stand the weight of the unit and does not increase the operating noise
or vibration. If vibration is transmitted through the house, fix the unit with the aid of vibration-proof pads between the unit and the fittings.
Select a place where cold or hot air, operation noises from the indoor and outdoor units do not cause any inconvenience to your neighbours.
Do not leave any obstacles near the outlet and inlet of the outdoor unit. This may cause malfunctioning and increased operating noise.
If you hear an irregular noise during operation, contact your dealer.
Inspection and maintenance
Depending on operating environment, the inside of the air-conditioner may become dirty after a few year operations. This will reduce
performance. In addition to normal cleaning, we would recommend inspection and maintenance. (This may lead the air-conditioner to
having a longer life without any trouble.)
• Contact your dealer, or any distributor, for inspection and maintenance. (There will be a charge for this service).
• We would recommend inspection and maintenance to be carried out during the off-season.
• If the supply cord of this appliance is damaged, it must only be replaced by a repair shop appointed by the manufacturer, because
special purpose tools are required.
– 19 –
RLC012A002A_EN_001-022
19
4/8/14, 11:01
Troubleshooting
Please carry out the following checks before making a service call.
The air-conditioner does not work at all.
Has the power switch been turned off?
Has the timer been set in the “ON”
position?
Is there a power failure or a blown fuse?
Poor cooling or heating
Have you set the thermostat at a suitable
temperature?
Is the air filter clean? (Not clogged?)
Did you leave any doors or windows
open?
Poor cooling
Is there any direct sunlight entering the
room?
Is there a heat source in the room?
Are there too many people in the room?
If the air-conditioner does not operate properly after you have checked the above points, or if any doubt still exists after you have
consulted page 20, or if things happen as shown on page 21, switch off the power and contact your dealer.
An alternative refrigerant (R410A) is used in this air-conditioner. When asking your
dealer for service or inspection and maintenance, explain the dealer about it.
Notice
The unit does not restart immediately after you have
stopped it.
(RUN light is on)
Airflow is not blown out when starting the HEATING operation.
RUN light blinks slowly
(1.5 sec ON, 0.5 sec OFF)
Airflow is not blown out for 5 to 10 min. or blown out not
warm wind for a moment at HEATING operation.
RUN light blinks slowly
(1.5 sec ON, 0.5 sec OFF)
Airflow is not blown out when starting the DRY operation.
Restart is blocked for 3 minutes after you have stopped the operation to protect the unit.
The three-minute protection timer in the microcomputer automatically starts it up again.
Airflow has stopped to prevent blowing out of cold air until the
indoor heat exchanger has warmed up. (2 to 5 min.) (HOT
KEEP program)
When outdoor temperature is low and humidity is high, the unit
sometimes performs defrosting automatically. Please wait. During defrosting, water or steam may escape from the outdoor
unit.
The indoor fan may stop to prevent re-evaporation of dehumified
moisture and to save energy.
(RUN light is on)
Some steam escapes during COOL operation.
This may occur if the room's temperature and humidity are very high. It
disappears as soon as the temperature and humidity decrease.
There is a slight smell.
Air blown out during operation may smell. This is caused by
tobacco or cosmetics adhering to the unit.
You hear a slight gurgling sound.
This is caused by refrigerating liquid moving within the unit.
You hear a slight cracking sound.
This is caused by heat expansion or contraction.
You hear a hissing or clicking sound.
This is caused by the operation of the refrigerant control valves
or electric components.
– 20 –
RLC012A002A_EN_001-022
20
4/8/14, 11:01
After a power cut, the unit does not restart even if power
has been restored.
If the auto restart function is not set, the unit will not restart automatically. Use the remote control to start the operation again.
Remote control signals are not received.
Remote control signals may not be received if the signal receiver
on the air-conditioner is exposed to direct sunlight or other bright
light.
If so, cut out the sunlight or reduce the other light.
Moisture may form on the air outlet grills.
If the unit is operated for a long time in high humidity, moisture
may form on the air outlet grills and start dripping.
Whistling noise is heard from the outdoor unit.
The noise means that the revolution speed of the compressor is
increasing or decreasing.
Fan will not stop immediately after unit operation was
stopped.
Indoor fan : Fan will not stop after 2 hours if set to CLEAN operation.
Outdoor fan : Fan will not stop about a 1 minute period in order to
protect the unit.
RUN light stays on even though operation was stopped.
The RUN light illuminates during CLEAN operation.
Run light turns off when CLEAN operation ends.
Contact your dealer
■ Turn off the power switch immediately and inform your dealer in any of the following situations:
The cable becomes extremely hot.
The covering of the cable is cracked.
CAUTION
If the power cord becomes damaged, ask your dealer or a qualified engineer to
install the replacement to avoid accidents.
The fuse or switch blows continuously.
The TV, radio or other equipment starts to malfunction.
A switch does not activate properly.
You hear a strange noise during operation.
When abnormalities occur, turn off the power supply immediately and turn it on after 3 minutes. Restart the operation
with ON/OFF button of the remote control and the abnormalities still continue.
The RUN and TIMER lights on the unit display section blink
quickly (0.5 sec. ON; 0.5 sec. OFF) and do not work.
– 21 –
RLC012A002A_EN_001-022
21
4/8/14, 11:01
Self diagnosis function
■ We are constantly trying to do better service to our customers by installing such judges that show abnormality of each function as follows:
RUN light
Cause
Description of trouble
1-time flash
Heat exchanger sensor error
• Broken heat exchanger sensor wire, poor connector
connection
2-time flash
Room temperature sensor error
• Broken room temperature sensor wire, poor connector
connection
5-time flash
Active filter voltage error
• Defective power supply
6-time flash
Indoor fan motor error
• Defective fan motor, poor connector connection
1-time flash
Outdoor temperature sensor error
• Broken outdoor sensor wire, poor connector connection
2-time flash
Outdoor heat exchanger fluid
pipe sensor error
• Broken heat exchanger fluid pipe sensor wire, poor
connector connection
4-time flash
Discharge pipe sensor error
• Broken discharge pipe sensor wire, poor connector
connection.
1-time flash
Current cut
• Compressor locking, open phase on compressor output,
shortcircuit on power transistor, closed service valve
2-time flash
Trouble of outdoor unit
• Broken power transistor, broken compressor wire
• Broken discharge pipe sensor wire, poor connector connection
• Compressor blockage
3-time flash
Over current
• Overload operation, overcharge
4-time flash
Power transistor error
• Broken power transistor
5-time flash
Over heat of compressor
• Gas shortage, defective discharge pipe sensor, closed service
valve
6-time flash
Error of signal transmission
• Defective power supply, Broken signal wire, defective in/outdoor
unit boards
7-time flash
Outdoor fan motor error
• Defective fan motor, poor connector connection
Keep flashing
Cooling high pressure protection
• Gas over charge, short circuit of outdoor unit
2-time flash
Rotor lock
• Defective compressor
• Open phase on compressor
• Defective outdoor unit boards
TIMER light ON
TIMER light
RUN light keeps flashing
RUN light ON
RUN light 2 time flash
– 22 –
RLC012A002A_EN_001-022
22
4/8/14, 11:01
ORIGINAL INSTRUCTIONS
USER’S MANUAL
AIR-CONDITIONER
ENGLISH
MANUEL DE L’UTILISATEUR
FRANÇAIS
CLIMATISEUR
ANWENDERHANDBUCH
DEUTSCH
KLIMAGERÄT
ISTRUZIONI PER L’USO
SRK25ZMP-S
SRK35ZMP-S
SRK45ZMP-S
ITALIANO
CONDIZIONATORE D’ARIA
MANUAL DEL PROPIETARIO
ESPAÑOL
ACONDICIONADOR DE AIRE
GEBRUIKERSHANDLEIDING
NEDERLANDS
AIRCONDITIONING
MANUAL DO UTILIZADOR
PORTUGUÊS
APARELHO DE AR CONDICIONADO
ΟΔΗΓΙΕΣ ΧΡΗΣΗΣ ΕΛΛΗΝΙΚΑ
ΚΛΙΜΑΤΙΣΤΙΚΟ
РУКОВОДСТВО ПО ЭКСПЛУАТАЦИИ
РУССКИЙ
КОНДИЦИОНЕР ВОЗДУХА
KULLANIM KILAVUZU
TÜRKÇE
AIR-CONDITIONING & REFRIGERATION DIVISION
3-1, Asahi, Nishibiwajima-cho, Kiyosu, Aichi, 452-8561, Japan
http://www.mhi.co.jp
MITSUBISHI HEAVY INDUSTRIES AIR-CONDITIONING EUROPE, LTD.
7 Roundwood Avenue, Stockley Park, Uxbridge, Middlesex, UB11 1AX, United Kingdom
Tel : +44-20-7025-2750
Fax: +44-20-7025-2751
http://www.mhiae.com
MITSUBISHI HEAVY INDUSTRIES AIR-CONDITIONERS AUSTRALIA, PTY. LTD.
9C Commercial Road Kingsgrove NSW 2208
Tel : +61-2-8571-7977
Fax: +61-2-8571-7992
http://www.mhiaa.com.au
PO BOX 318 Kingsgrove NSW 1480
This air conditioner complies with EMC Directive 2004/108/EC,
LV Directive 2006/95/EC.
Este acondicionador de aire cumple con la directiva EMC: 2004/
108/EC, LV Directiva 2006/95/EC.
Ce climatiseur est conforme à la Directive EMC: 2004/108/EC, LV
Directive 2006/95/EC.
Deze airconditioner voldoet aan EMC Directive 2004/108/EC, LV
Directive 2006/95/EC.
Dieses Kimagerät erfüllt die EMC Direktiven 2004/108/EC, LV
Direktiven 2006/95/EC.
Este aparelho de ar condicionado está em conformidade com a
Directiva EMC 2004/108/EC e a Directiva LV 2006/95/EC.
Questo condizionatore d’aria è conforme alla Direttiva EMC: 2004/
108/EC, LV Direttiva 2006/95/EC.
∞˘Ùfi ÙÔ ÎÏÈÌ·ÙÈÛÙÈÎfi Â›Ó·È Û‡ÌʈÓÔ Ì ÙȘ ÚԉȷÁڷʤ˜ Ù˘
√‰ËÁ›·˜ EMC 2004/108/EK Î·È Ù˘ √‰ËÁ›·˜ LV 2006/95/EK.
RLC012A003A
RLC012A003A_Cover1-4
1
4/23/14, 17:32