- Bamford Engineering Products

IQAN
Electronic Control Systems
North American Product Offering
Catalog HY14-1825/US
Catalog HY14-1825/US
Electronic Control Systems
IQAN
WARNING - USER RESPONSIBILITY
FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY
AND PROPERTY DAMAGE.
•
This document and other information from Parker-Hannifin Corporation, its subsidiaries and authorized distributors provide product or system options for further investigation by users having technical expertise.
•
The user, through its own analysis and testing, is solely responsible for making the final selection of the system and components and assuring that all performance,
endurance, maintenance, safety and warning requirements of the application are met. The user must analyze all aspects of the application, follow applicable industry
standards, and follow the information concerning the product in the current product catalog and in any other materials provided from Parker or its subsidiaries or authorized distributors.
•
To the extent that Parker or its subsidiaries or authorized distributors provide component or system options based upon data or specifications provided by the user, the
user is responsible for determining that such data and specifications are suitable and sufficient for all applications and reasonably foreseeable uses of the components or
OFFER OF SALE
The items described in this document are hereby offered for sale by Parker-Hannifin Corporation, its subsidiaries or its authorized distributors. This offer and its acceptance are
governed by the provisions stated in the detailed “Offer of Sale” elsewhere in this document or available at www.parker.com/hydraulicvalve.
SAFETY
For safety information, see Safety Guide SG HY14-1000 at www.parker.com/safety or call 1-800-CParker.
II
Parker Hannifin Corporation
Hydraulic Valve Division
Elyria, Ohio USA
Catalog HY14-1825/US
Contents
Electronic Control Systems
IQAN
IQAN
Introduction ........................................................................................................................ 1
Software platforms
IQAN Studios ..................................................................................................................... 2
IQANdevelop ...................................................................................................................... 3
Master units, IQANdesign platform
IQAN-MD3.......................................................................................................................... 4
IQAN-MDL.......................................................................................................................... 5
IQAN-MC2.......................................................................................................................... 6
Master units, IQANdevelop platform
IQAN-MDM......................................................................................................................... 7
Expansion units, IQANdesign platform
IQAN-XA2 .......................................................................................................................... 8
IQAN-XS2 .......................................................................................................................... 9
Expansion units, IQANdesign or IQANdevelop
IQAN-XT2......................................................................................................................... 10
IQAN-LL and IQAN-LM .................................................................................................... 11
Expansion units, IQANdevelop platform
IQAN-XP2 ........................................................................................................................ 12
Stand-alone units, IQANdevelop platform
IQAN-TOC8...................................................................................................................... 13
IQAN-TOC2...................................................................................................................... 14
Components, analog levers
IQAN-LSL and IQAN-LST ................................................................................................ 15
Components, sensors
IQAN-SP .......................................................................................................................... 16
IQAN-ST........................................................................................................................... 17
IQAN compatible Parker sensors ..................................................................................... 18
Accessories
IQAN tools and communication cables ............................................................................ 20
IQAN prototype cables and connector kits....................................................................... 21
IQAN sales tools
IQAN compatibility matrix................................................................................................. 22
Terms of sale with Warranty Limitations........................................................................... 23
III
Parker Hannifin Corporation
Hydraulic Valve Division
Elyria, Ohio USA
Catalog HY14-1825/US
Introduction
Electronic Control Systems
IQAN
®
IQAN for the life
of your machine
The state-of-the-ar t IQAN system is a unique, totally electronic approach that replaces
mechanical and electromechanical systems for controlling and monitoring hydraulics in mobile
machines. With Parker's IQAN, you have complete freedom to design customized software
without advanced programming skills. The functions available within the IQAN system are so flexible that
sophisticated applications are quickly programmed and optimized.
The wide range of outdoor modules with flexible I/O available with IQAN ensures complete
machine management. The system offers a building-block approach that simplifies component
design and installation and reduces development time and expense. IQAN hardware is tested
for robust operation and compatibility with mobile hydraulic equipment. In addition, it meets
industry and government standards for operation in severe conditions that include extremely high or low
temperatures, vibrations, mechanical impact and electromagnetic interference.
IQAN is user-programmable via a high level graphical design tool, which dramatically simplifies development.
Simulation of the control system takes place in parallel with the programming of machine functions. The IQAN
software tools cover all phases of a machine’s life cycle, from development through production to after sales.
IQAN by Parker offers a complete range of control products to meet your needs. The TOC2 and analog joystick
products are for basic valve driver applications. The TOC8 is a standalone controller with a flexible I/O setup
and J1939 communication for a small machine system. The MDM, MDL and MC2 are CANbus master units.
When combined with our versatile expansion modules, such as the XA2 and XT2, you can build a complete
control system for a larger, more complicated machine.
Pr
o
Develop
ction
Production
Manufacturer's constantly strive for improved quality, simpler
configuration, faster startup and reduced production line set-up time.
IQAN's robust hardware and easy to use software can automate the
process while helping trace and record delivery status.
t
en
du
Development
Time to market is one of the most important factors for return on
investment. It is primarily set by design time, application programming,
simulating, verifying and creating documentation. IQAN's flexible I/O,
building block hardware and user friendly, high-capacity software are
essential to meet these demands.
m
IQAN is the solution for:
Af te
r sales
After sales
Your customer wants a reliable machine with minimum downtime,
simple maintenance and maximum field service support. IQAN is made
for severe conditions and has software to make routine service simple.
If needed, IQAN has comprehensive system diagnostic tools.
1
Parker Hannifin Corporation
Hydraulic Valve Division
Elyria, Ohio USA
Catalog HY14-1825/US
Technical information
Software platforms
IQAN Studios
Application
The IQAN software studios cover all phases of a
machine’s life cycle, from development through
production to after sales. There are three different
studios available; IQAN Creative Studio, IQAN
Productive Studio and IQAN Active Studio.
IQAN Creative studio
IQAN Creative studio is a user-programmable software
package for the R&D department. It includes tools
for application development, simulation and initial
setup.
Contents
When ordering IQAN Studios, the following items
are included:
•
IQAN Studio software CD-ROM
•
1 licence
Communication cables are not included. Order the
cables you need from the accessories section.
HD
100 Mbyte storage space available
Ports
serial port, RS232 or USB port
Display
XVGA
(1280x1024 recommended)
Software
Windows® 2000, XP
(Windows® XP is recommended)
•
IQANsimulate
•
IQANrun
•
IQANscript
•
IQANcustomize
•
IQANsimulate
•
IQANrun
IQAN Active studio
IQAN Active studio is a software package for service
and production personnel. It includes tools for machine
diagnostics, setup and simulation.
Requirements
CPU
PC compatible, Pentium® II 233 MHz
or better
minimum 256 Mbyte
(512 Mbyte recommended)
IQANdesign
IQAN Productive studio
IQAN Productive studio is a software package for the
manufacturing and service departments. It includes
development tools for customization and automation
of production and maintenance processes.
The user’s manual for IQANdesign is provided in
electronic format and may be downloaded from our
website, www.iqan.com. For a printed manual, contact
Parker Catalog Services.
RAM
•
•
IQANrun
•
IQANsimulate
IQAN Studios are used with the newest IQAN products
including the IQAN-MD3 and IQAN-MDL master/
display units and also with the IQAN-MC2 controller.
Description
IQAN Creative Studio
IQAN Productive Studio
IQAN Active Studio
Ordering PN
20073643
20073644
20073642
Upgrade
It is always possible to download the latest version
from our web site www.iqan.com.
2
Parker Hannifin Corporation
Hydraulic Valve Division
Elyria, Ohio USA
Catalog HY14-1825/US
Technical information
Software platforms
IQANdevelop
Application
IQANdevelop is a software tool for adding modules
and channels to the IQAN control system in order to
build functions for the developer’s mobile machine
application.
The software is based on the different modules’ block
diagrams. To add a new module, you create a new
block diagram. From the block diagram it is easy to
set/edit channel parameters and measure the IQAN
system.
With the navigator function in IQANdevelop you get
an overview of the connected channels in a specific
function. In this way it is easy to see how the channels
interact with each other.
IQANdevelop is also a tool for measuring and
troubleshooting IQAN systems. With a logging
function, measurements can be viewed graphically.
IQANdevelop PRO also includes IQANsimulate, for
performing a virtual test of your application before
installing it on the machine. IQANsimulate requires
a National Instruments CAN communication card in
order to operate.
Contents
When ordering IQANdevelop, the following items
are included:
•
IQANdevelop software CD-ROM
•
1 licence
•
1 serial cable
•
1 simulation cable (PRO version only)
IQANdevelop Change is a service tool which simplifies
setup during production or after-sales service for your
IQAN controlled mobile machine. Features that have
been set as adjustable are easily accessed with
the Change software by production employees and
service personnel to fine tune and troubleshoot your
machine’s operation.
The user’s manual for IQANdevelop is available in
electronic format and may be downloaded from our
website, www.iqan.com.
Requirements
CPU
PC compatible, Pentium® II 233 MHz
or better
IQANdevelop software is used with the IQAN-MDM
master/display and also with the IQAN-TOC8 and
IQAN-TOC2 standalone controllers.
RAM
minimum 256 Mbyte
(512 Mbyte recommended)
HD
100 Mbyte storage space available
Description
IQANdevelop PRO
IQANdevelop Change
Ports
serial port, RS232 or USB port
Display
XVGA
(1280x1024 recommended)
Software
Windows® 2000, XP
(Windows® XP is recommended)
Ordering PN
20005607
20005606
Upgrade
It is always possible to download the latest version
from our web site www.iqan.com.
3
Parker Hannifin Corporation
Hydraulic Valve Division
Elyria, Ohio USA
Master units, IQANdesign platform
IQAN-MD3
Catalog HY14-1825/US
Technical information
Application
The IQAN-MD3 is a master unit that works with a variety
of expansion modules in the IQANdesign platform
control system. The MD3 is fully programmable for
use in any machine application, as a graphical user
interface and as a CAN gateway.
The IQAN-MD3 is constructed to be weatherproof for
outdoor use. The MD3 will display vehicle data and
system information.
The IQAN-MD3 has a 3.5” transflective TFT color
display. There are five navigation buttons and four ’soft’
function buttons to make interaction with the control
simple for the operator.
General
Weight
Operating temperature
Protection
Voltage supply
Current consumption (idle)
Performance
Processor
Logging
Sample time
Software tools
The unit is designed to be easily mounted in a vehicle
dashboard or exterior control panel. The unit has
two sealed and keyed Deutsch DTM 12 position
connectors.
0.3 Kg
-30 to +60 °C
-25>LCD off >+75 °C
outdoor use
11- 32 Vdc
130 mA (28 Vdc)
190 mA (14 Vdc)
For time critical functions the MD3's sample rate can
be set as low as 10 ms. The unit has a large internal
memory for events and logging that is capable of
storing 80,000 records.
32-bit (144 MHz)
80K records
min 10ms
IQANdesign family
The MD3 analog inputs accept 0-5V signals from input
devices or sensors. These inputs can also be set up
as on-off inputs. A digital output is available and may
be used for alarm or alert signals.
Communication interfaces
CAN (ISO 11898)
2
Protocols
ICP, SAE J1939,
CANopen, etc
RS-232
1
Protocols
AT-Hayes,GSM07.07,
GSM07.05, IDP
USB 2.0 (full speed)
1
Outputs
Digital output
Type
Max load
1
high side switch
200 mA
Inputs
Voltage inputs
Signal range
Resolution
Digital inputs
Signal high
Signal low
7
0 - 5 Vdc
1.2 mV
(7)1
4 Vdc
1 Vdc
The MD3 is connected to other units by two CAN
busses. All CAN busses may be configured as
ICP (IQAN CAN Protocol), SAE J1939 or Generic
CAN. The unit supports RS232 for modem (remote
diagnostic) connection and USB for communication
with a PC.
Description
IQAN-MD3
Ordering PN
20072409
137
116
1) The voltage and digital inputs share the same physical pins. The
user defines the channels/pins with IQANdesign.
units=mm
4
CO
NN
ECT
OR
S
23
47
Parker Hannifin Corporation
Hydraulic Valve Division
Elyria, Ohio USA
Master units, IQANdesign platform
IQAN-MDL
Catalog HY14-1825/US
Technical information
Application
The IQAN-MDL is a central unit that works with a
variety of expansion modules in an IQAN control
system. The MDL works as a master, displays
information, provides a data gateway and has a variety
of flexible I/O channels.
The IQAN-MDL is intended for the in-cab environment
and will display vehicle data and system information.
In most applications the display will replace all
mechanical dial type instruments. The MDL has a
6.5” transflective TFT color display that has very high
optical performance across a wide range of operating
conditions.
General
Weight
Operating temperature
Protection
Voltage supply
Current consumption (idle)
Data interface
Type
Communication ports
Type
Modem
Type
Outputs
Proportional outputs
Type current mode
PWM mode
Signal range
Dither frequency
Resolution
Digital outputs
Type
Max load
The MDL can control proportional valves using
current mode (current closed-loop) or PWM mode
(voltage open-loop) signals. The analog inputs accept
0-5V signals from input devices or sensors. These
inputs can also be set up to accept one frequency or
directional frequency (quadrature) input. Many outputs
may alternatively be used as digital inputs for switches.
The unit also has 4 CAN interfaces, all of which are
user configurable. The MDL is connected to other
units by a CAN bus. The unit has two RS232 ports for
communication, a USB port and an embedded GSM
triband modem.
0.7 Kg
-40 to +70 °C
in-cab use
11 - 32 VDC
180 mA (28 VDC)
170 mA (14 VDC)
Parker ICP
(IQAN CAN Protocol)
J1939, generic, etc.
RS232, USB
GSM triband
(900/1800/1900 MHz)
The back of the unit has an SD memory slot for
convenient data logging, a SIM card slot and an SMA
antenna connection for the modem. The MDL is ready
for advanced telematic functions.
current - closed-loop
voltage - open-loop
50 - 2000 mA
25 - 333 Hz
1 mA
Description
IQAN-MDL
high side switch
2A
Ordering PN
20016753
206
Inputs
Voltage inputs
Signal range
0 - 5 VDC
Resolution
5 mV
Frequency inputs
Signal range (speed mode) 2 - 30000 Hz
(position mode) 0 - 30000 Hz
Quadrature inputs
Signal range (speed mode) 2 - 30000 Hz
(position mode) 0 - 30000 Hz
Digital inputs
DIN-A thru -D, DIN-M thru -P
Signal high
>2 VDC
Signal low
<0.8 VDC
DIN-E thru -L
Signal high
>3 VDC
Signal low
<2.5 VDC
143
KN
OB
units=mm
5
63
81
Parker Hannifin Corporation
Hydraulic Valve Division
Elyria, Ohio USA
Master units, IQANdesign platform
IQAN-MC2
Catalog HY14-1825/US
Technical information
Application
The IQAN-MC2 is a flexible master unit for the IQAN
bus system. This unit is suitable for use as either a Bus
master or standalone control. The IQAN-MC2 has new
I/O flexibility that allows the user greater freedom in
defining signals for both measurement and control.
The different input types are voltage, on/off, pulse
and frequency. The outputs are proportional and
on/off. The unit also has two CAN interfaces for bus
communication using IQAN CAN Protocol (ICP) and
SAE J1939 or Generic CAN.
The MC2 is equipped with a Real Time Clock and can
perform data logging functions.
General
Weight
Temperature range
Protection
Voltage supply
Current consumption (idle)
Data interface
Type
Communication port
Type
Outputs
Proportional outputs
Type current mode
PWM mode
Signal range
Dither frequency
Resolution
Digital outputs
Type
Max load
Inputs
Voltage inputs
Signal range
Resolution
Frequency inputs
Signal range (speed mode)
(position mode)
Digital inputs
Signal high
Signal low
The IQAN-MC2 can control proportional valves using
current mode (current closed-loop) or PWM mode
(voltage open-loop) signals. The analog inputs will
accept 0-5V signals from input devices or sensors. The
inputs can also be configured for 5 frequency inputs.
Some outputs may alternatively be used as voltage
inputs or digital inputs for switches. For communication
and diagnostics the MC2 has a USB interface.
0.7 Kg
-40 to +70 °C
outdoor use
11- 32 VDC
160 mA (28 VDC)
200 mA (14 VDC)
Parker ICP
(IQAN CAN Protocol)
J1939, Generic CAN
The aluminum housing is designed to be rugged, but
light and has a sealed, automotive AMP/Tyco power
timer connector. The IQAN-MC2 has a membrane to
prevent condensation inside the housing. Additional
protection allows the unit to be steam-cleaned. This
controller is designed for the outdoor environment.
USB 1.1
current - closed-loop
voltage - open-loop
100 - 2000 mA
25 - 333 Hz
1 mA
Diagnostics: If an error is detected an LED on the top
of the controller flashes a sequence to indicate the
nature of the error.
Description
IQAN-MC2
high side switch
2000 mA
Ordering PN
20070899
0 - 5 VDC
5 mV
2 - 20000 Hz
0 - 20000 Hz
60
4 VDC - VBAT
0 - 1 VDC
32
142
164
67
52
75
6
units=mm
Parker Hannifin Corporation
Hydraulic Valve Division
Elyria, Ohio USA
Master units, IQANdevelop platform
IQAN-MDM
Catalog HY14-1825/US
Technical information
Application
The IQAN-MDM is a master unit that works with the
expansion modules in the IQANdevelop platform
control system. The IQAN-MDM is fully programmable
for use in any machine application. The unit works as
a master for controlling applications, as a graphical
user interface and as a CAN interface.
IQAN-MDM uses an improved 2.8” FSTN, black
& white LCD for the best readability in all lighting
conditions. The improved display uses Chip-On-Glass
technology for higher reliability.
General
Weight
Rated power supply
Min/max power
Operating temperature
(reduced display update)
Protection
Current consumption
Data interface
Display
Type
Resolution
Performance
Processor
Sample time
Software tools
Function buttons and control buttons in combination
with a graphical display makes system feedback with
user interaction possible. With the three function
buttons, a decrease/increase value-button and an
escape-button, it is easy to adjust, calibrate and
measure the IQAN system. In case of an error the
display will alert the operator with a signal and a
message on the display.
0,2 kg
12-24 Vdc
9/32 Vdc
-30°C to +70°C
-30°C to -10°C
outdoor use
max 100 mA (28 Vdc),
max 180 mA (14 Vdc)
Parker ICP
(IQAN CAN Protocol)
IQAN-MDM is designed for in-cab as well as outdoor
use. It can be used in both 12 and 24 Vdc systems.
The IQAN-MDM is connected to other units by a CAN
bus. The CAN bus may be configured as ICP (IQAN
CAN Protocol), SAE J1939 or Generic CAN. The
RS232 interface is used for connection with PC and
for land line or wireless modem (remote diagnostic)
connection.
2.8” B/W LCD
202x32 pixels
16-bit (16 MHz)
20-100 ms
IQANdevelop family
The IQAN-MDM also contains a real time clock, an
alarm output and can present text in 10 different
languages. A green LED indicator on the back of
the module indicates supply voltage and status
”heartbeat”.
Communication interfaces
CAN (ISO 11898)
1
Protocols
ICP, SAE J1939,
CANopen, etc
RS-232
1
Protocols
AT-Hayes,GSM07.07,
GSM07.05, IDP
Outputs
Digital output
Type
Max load
Buzzer
Description
IQAN-MDM
Ordering PN
5010010
1
high side switch
1,2 A
Sound alarm output
72
135
10
29
61
units=mm
7
Parker Hannifin Corporation
Hydraulic Valve Division
Elyria, Ohio USA
Expansion units, IQANdesign platform
IQAN-XA2
Catalog HY14-1825/US
Technical information
Application
The IQAN-XA2 is the next generation of expansion
module in the IQAN product group. This unit is
designed for high digital I/O count, weather resistance,
and safety.
All IQAN expansion modules communicate with a
master over a CAN bus. The XA2 module has new
I/O flexibility that allows the user greater freedom in
defining signals for measurement and control.
General
Weight
Operating temperature
Protection
Voltage supply
Current consumption (idle)
Data interface
Outputs
Proportional outputs
Type current mode
PWM mode
Signal range
Dither frequency
Resolution
Digital outputs
Type
Max load
Inputs
Voltage inputs
Signal range
Resolution
Frequency inputs
Signal range (speed mode)
(position mode)
Quadrature inputs
Signal range (speed mode)
(position mode)
Digital inputs
Signal high
Signal low
The IQAN-XA2 can control proportional valves using
current mode (current closed-loop) or PWM mode
(voltage open-loop) signals. The analog inputs accept
0-5V signals from input devices or sensors. These
inputs can also be set up to accept 4 frequency or
2 directional frequency (quadrature) inputs. Many
outputs may alternatively be used as digital inputs for
switches. The XA2 also has a number of high power
digital (on-off) outputs.
0.7 Kg
-40 to +70 °C
outdoor use
11- 32 VDC
180 mA (28 VDC)
170 mA (14 VDC)
Parker ICP
(IQAN CAN Protocol)
The aluminum housing is designed to be rugged, but
light and has a sealed, automotive AMP/Tyco power
timer connector. The XA2 has a membrane to prevent
condensation inside the housing. This controller is
designed for the outdoor environment.
current - closed-loop
voltage - open-loop
100 - 2000 mA
25 - 333 Hz
1 mA
The unit executes a self-test during start up and cyclic
operation. An internal watch dog checks for software
errors and will interrupt outputs if errors are detected.
The IQAN-XA2 is made using selected components
and conforms to strict international requirements.
high side switch
2A
Diagnostics: If an error is detected an LED on the top
of the controller flashes a sequence to indicate the
nature of the error.
Description
IQAN-XA2
0 - 5 VDC
5 mV
Ordering PN
5010033
2 - 30000 Hz
0 - 30000 Hz
2 - 30000 Hz
0 - 30000 Hz
4 VDC - VBAT
0 - 1 VDC
60
32
142
164
67
52
75
8
units=mm
Parker Hannifin Corporation
Hydraulic Valve Division
Elyria, Ohio USA
Expansion units, IQANdesign platform
IQAN-XS2
Catalog HY14-1825/US
Technical information
Application
The IQAN-XS2 is the next generation of expansion
module in the IQAN product group. This unit is
designed for high digital I/O count, weather resistance,
and safety.
All IQAN expansion modules communicate with a
master over a CAN bus. The XS2 module has a large
number of inputs and outputs that allows the user to
have fewer modules for digital signals.
General
Weight
Operating temperature
Protection
Voltage supply
Current consumption (idle)
Data interface
Outputs
Digital outputs
Type
Max load
Inputs
Voltage inputs
Signal range
Resolution
Digital inputs
Signal high
Signal low
The IQAN-XS2 can control valves using digital (on-off)
output signals. The analog inputs accept 0-5V signals
from input devices or sensors. These analog inputs
may alternatively be used as high impedance digital
inputs for switches. The XS2 also has a number of
dedicated digital (on-off) inputs.
0.7 Kg
-40 to +70 °C
outdoor use
11- 32 VDC
180 mA (28 VDC)
170 mA (14 VDC)
Parker ICP
(IQAN CAN Protocol)
The aluminum housing is designed to be rugged, but
light and has a sealed, automotive AMP/Tyco power
timer connector. The XS2 has a membrane to prevent
condensation inside the housing. This controller is
designed for the outdoor environment.
The unit executes a self-test during start up and cyclic
operation. An internal watch dog checks for software
errors and will interrupt outputs if errors are detected.
The IQAN-XS2 is made using selected components
and conforms to strict international requirements.
high side switch
2A
0 - 5 VDC
5 mV
Diagnostics: If an error is detected an LED on the top
of the controller flashes a sequence to indicate the
nature of the error.
4 VDC - VBAT
0 - 1 VDC
Description
IQAN-XS2
Ordering PN
5010017
60
32
142
164
67
52
75
9
units=mm
Parker Hannifin Corporation
Hydraulic Valve Division
Elyria, Ohio USA
Expansion units, IQANdesign or IQANdevelop
IQAN-XT2
Catalog HY14-1825/US
Technical information
Application
IQAN-XT2 is one of the “rugged generation” of
IQAN expansion modules. Key improvements for
this generation of modules are flexibility, weather
resistance and safety.
All IQAN expansion modules communicate with a
master over a CAN-BUS serial link. The XT2 has
an additional CAN hub designed to interface with
J1939 diesel engines on mobile machinery and has
a dedicated output for electronic throttle control.
General
Weight
Operating temperature
Protection
Voltage supply 9 - 34 VDC
Current consumption (idle)
Data interface
Additional CAN hub
The XT2 module has a flexible I/O interface which
gives system designers increased options. The same
physical pin can be used for different types of inputs
or outputs. New types of I/O such as E-gas and PWM
outputs increase the flexibility of the module. Digital
outputs now have features such as softstart and
peak & hold. The J1939 CAN hub allows the XT2
to communicate directly with an electronic engine
control bus.
0.7 Kg
-40 to +70 °C
outdoor use
180 mA (28 VDC)
170 mA (14 VDC)
Parker ICP
(IQAN CAN Protocol)
J1939 or other byte
aligned CAN protocol
The aluminum housing is designed to be rugged, but
light and has a sealed, automotive AMP/Tyco power
timer connector. The XT2 has a membrane to prevent
condensation inside the housing. This controller is
designed for the outdoor environment.
Outputs
Proportional current outputs
Number
2 double
Signal range
60 - 1800 mA
Dither frequency
25 - 150 Hz
Dither amplitude
0 - 500 mA
Resolution
0.7 mA
Digital/ PWM (no current feedback)
Number
6 / 3 double
Type
high side switch
Max load
3A
PWM frequency
25 - 2000 Hz
E-gas/Servo motor output (PWM H-bridge)
Number
1
Signal Range
0-100% rated power
Max load
2,5A
Inputs
Voltage/Frequency
Number
Signal range
Resolution
Frequency range
The unit executes a self-test during start up and cyclic
operation. An internal watch dog checks for software
errors and will interrupt outputs if errors are detected.
The IQAN-XT2 is made using selected components
and conforms to strict international requirements.
Diagnostics: If an error is detected an LED on the top
of the controller flashes a sequence to indicate the
nature of the error.
Description
IQAN-XT2
Ordering PN
5010018
10/3
0 - 5 VDC
5 mV
1-10 000 Hz
60
32
142
164
67
52
75
10
units=mm
Parker Hannifin Corporation
Hydraulic Valve Division
Elyria, Ohio USA
Expansion units, IQANdesign or IQANdevelop
IQAN-LL and IQAN-LM
Catalog HY14-1825/US
Technical information
Application
IQAN-LM is especially suitable for continuous
duty machine operations such as in forestry and
construction work. The combination of a mini-lever and
armrest provide substantial ergonomic EHQH¿WV
IQAN-LL is designed for rough handling. The
ergonomic design gives good support to the arms and
wrists and assures a comfortable grip from several
angles. The design allows operators to quickly become
familiar with the lever.
General
Weight
Rated power supply
Min/max power
Operating temperature
Protection
Current consumption
(idle)
Data interface
Axis sensors
Number
Resolution
Both levers are designed for in-cab use, one type for
connection to both 12 VDC and 24 VDC systems. All
inputs and outputs are protected against short circuit
to ground and to main power supply.
LM 0,4 Kg, LL 0,9 Kg
12 – 24 VDC
9 / 32 VDC
-30 to +70 °C
in-cab use
57 mA (28 VDC),
46 mA (14 VDC)
Parker ICP
(IQAN CAN Protocol)
The IQAN levers are connected to other modules
through a CAN bus which makes data exchange more
efficient, simplifies installation and increases noise
immunity. The lever units are lightweight with small
installation dimensions and have low, well-adapted
actuating forces.
All proportional inputs are of contactless inductive type
with neutral position sensors to provide high safety
and reliability. A LED indicator shows supply voltage
and internal operation.
max 3 pcs, inductive
9 bit
A number of different handle types are available.
Neutral position detection
Signal
IR-sensor, on/off
Digital inputs
Number
Signal range
Active range
Analog inputs
Number
Signal range
Active range
Resolution
Description
Ordering PN
IQAN-LL-2U (no handle)
IQAN-LM-2A (stick handle)
10 pcs, 4 internal,
6 external
(differs according
to handle)
0 – 5 VDC
0 – 32 VDC
”0” = 0,0 – 1,0 VDC,
”1” = 2,0 – 32,0 VDC
20005961
20005963
Consult datasheet and pricelist for other handle
options and ordering part numbers.
69
ø89
2 pcs
0 – 5 VDC
0 – 32 VDC
0,5 – 4,5 VDC
5 mV
82
56
105
ø70
Digital outputs
Number
1 pc
(takes place of 1 digital input)
Signal
200 mA
55
80
105
ø91
11
units=mm
Parker Hannifin Corporation
Hydraulic Valve Division
Elyria, Ohio USA
Expansion units, IQANdevelop platform
IQAN-XP2
Catalog HY14-1825/US
Technical information
Application
IQAN-XP2 is one of the “rugged generation” of
IQAN expansion modules. Key improvements for
this generation of modules are flexibility, weather
resistance and safety.
All IQAN expansion modules communicate with a
master over a CAN-BUS serial link. Mobile machine
I/O is controlled by selecting the appropriate
expansion module from the IQAN product family.
The XP2 module has a flexible I/O interface which
gives system designers increased options. The same
physical pin can be used for different types of I/O.
General
Weight
Operating temperature
Protection
Voltage supply
Current consumption (idle)
Data interface
Various types of I/O such as PWM outputs increase the
flexibility of the module. Digital outputs have features
including softstart and peak & hold.
0.7 Kg
-40 to +70 °C
outdoor use
9 - 34 VDC
105 mA (28 VDC)
90 mA (14 VDC)
Parker ICP
(IQAN CAN Protocol)
The aluminum housing is designed to be rugged, but
light and has a sealed, automotive AMP/Tyco power
timer connector. The XP2 has a membrane to prevent
condensation inside the housing. This controller is
designed for the outdoor environment.
The unit executes a self-test during start up and cyclic
operation. An internal watch dog checks for software
errors and will interrupt outputs if errors are detected.
The IQAN-XP2 is made using selected components
and conforms to strict international requirements.
Outputs
Proportional current outputs
Number
4 double
Signal range
60 - 1800 mA
Dither frequency
25 - 150 Hz
Dither amplitude
0 - 500 mA
Resolution
0.7 mA
Digital/ PWM (no current feedback)
Number
4/ 2 double
Type
high side switch
Max load
3A
PWM frequency
25 - 2000 Hz
Inputs
Voltage/Frequency
Number
Signal range
Resolution
Frequency range
Diagnostics: If an error is detected an LED on the top
of the controller flashes a sequence to indicate the
nature of the error.
Description
IQAN-XP2
Ordering PN
5010016
4/2
0 - 5 VDC
5 mV
1-30000 Hz
60
32
142
164
67
52
75
12
units=mm
Parker Hannifin Corporation
Hydraulic Valve Division
Elyria, Ohio USA
Stand-alone units, IQANdevelop platform
IQAN-TOC8
Catalog HY14-1825/US
Technical information
Application
IQAN-TOC8 is from the same family as the ”rugged”
generation of expansion modules in the IQAN product
group. These modules focus on flexibility, weather
resistance and safety.
General
Weight
Operating temperature
Protection
Voltage supply 9 - 34 VDC
Current consumption (idle)
Data interface
CAN hub
IQAN-TOC8 is a general purpose controller and
communicates with a variety of input and output
devices. It connects to a laptop PC and is programmed
with IQANdevelop software. No Master module is
required. It has proportional current outputs for valve
control, digital/PWM outputs for auxiliary functions and
analog/digital inputs for signals like pressure, RPM
or temperature. The unit has a CAN hub designed to
interface with a SAE J1939 network.
0.7 Kg
-40 to +70 °C
outdoor use
The IQAN-TOC8 has a flexible I/O interface. The same
physical pin can be used for different types of I/O. New
types of I/O such as digital PWM outputs increase the
flexibility of the controller. The digital outputs have new
features such as softstart and peak & hold.
180 mA (28 VDC)
170 mA (14 VDC)
RS232
(using IQANdevelop)
J1939 or other byte
aligned CAN protocol
The aluminum housing is designed to be rugged, but
light and has a sealed, automotive AMP/Tyco power
timer connector. The TOC8 has a membrane to prevent
condensation inside the housing. This controller is
designed for the outdoor environment.
Outputs
Proportional current outputs
Number
2 double
Signal range
60 - 1800 mA
Dither frequency
25 - 150 Hz
Dither amplitude
0 - 500 mA
Resolution
0.7 mA
Digital/ PWM (no current feedback)
Number
6 / 3 double
Type
high side switch
Max load
3A
PWM frequency
25 - 2000 Hz
Inputs
Voltage/Frequency
Number
Signal range
Resolution
Frequency range
The unit executes a self-test during start up and cyclic
operation. An internal watch dog checks for software
errors and will interrupt outputs if errors are detected.
The IQAN-TOC8 is made using selected components
and conforms to strict international requirements.
Diagnostics: If an error is detected an LED on the top
of the controller flashes a sequence to indicate the
nature of the error.
Description
IQAN-TOC8
Ordering PN
5010024
10/4
0 - 5 VDC
5 mV
2-10 000 Hz
60
32
142
164
67
52
75
units=mm
13
Parker Hannifin Corporation
Hydraulic Valve Division
Elyria, Ohio USA
Stand-alone units, IQANdevelop platform
IQAN-TOC2
Catalog HY14-1825/US
Technical information
Application
The IQAN-TOC2 is a simple task oriented controller
in the IQAN product group. This unit is designed for
ease of setup, weather resistance, and safety.
The TOC2 is a general purpose unit that can control two
bi-directional valve sections or two cartridge solenoids
simultaneously. The IQAN-TOC2 communicates with
a variety of input and output devices. It has current
mode (current closed-loop) or PWM mode (voltage
open-loop) output for valve control. The analog inputs
accept signals from joysticks or potentiometers. Two
digital inputs can be used to read switches.
General
Weight
Operating temperature
Protection
Voltage supply
Current consumption (idle)
Data interface
VREF output
Outputs
Current / PWM outputs
Number
Type current mode
PWM mode
Min. threshold
Max. load
Dither frequency
Resolution
Inputs
Voltage inputs
Number
Signal range
Resolution
Digital inputs
Number
Signal high
Signal low
The IQAN-TOC2 has a simple mechanical interface
for calibration. With a preloaded personality from the
factory, setup can be easily performed on the machine
using a screwdriver. Adjustments possible include
threshold, maximum output and slopes. The TOC2
may also be connected to a PC or Palm device and
programmed using IQANdevelop software to change
the functionality of the controller. This advanced
feature allows the TOC2 to be used in more demanding
applications.
0.2 Kg
-40 to +70 °C
outdoor use
9 - 34 VDC
60 mA (28 VDC)
40 mA (14 VDC)
mechanical encoder
or RS232
(using IQANdevelop)
4.9 - 5.1 VDC
30 mA (28 VDC)
The housing is designed to be rugged, but light
and has a sealed, automotive AMP junior-power
timer connector. The IQAN-TOC2 has a membrane
to prevent condensation inside the housing. This
controller is designed for the outdoor environment.
2 double
current - closed loop
voltage - open loop
50 mA
3000 mA
25 - 333 Hz
1 mA
The TOC2 is made using selected components and
conforms to strict international requirements.
Diagnostics: If an error is detected an LED on the top
of the controller flashes a sequence to indicate the
nature of the error.
Description
IQAN-TOC2 (100 hz)
2
0 - 5 VDC
5 mV
Ordering PN
5010028
Consult pricelist for other TOC2 factory preloaded
personalities and their ordering part numbers.
2
4 VDC - VBAT
0 - 1 VDC
SETU
P - pu
sh
1 sec.
Ente
Adjus r
t
A
B
TOC2
Curre
nt
Slop
e
min
max
start
stop
47
®
94
103
75
units=mm
14
Parker Hannifin Corporation
Hydraulic Valve Division
Elyria, Ohio USA
Components, analog levers
IQAN-LSL and IQAN-LST
Catalog HY14-1825/US
Technical information
Application
The IQAN-LSL is a linear lever and the IQAN-LST is
a linear, paddle style, mini-lever in the IQAN product
group. These levers focus on compact design, weather
resistance and safety.
General
Weight (LSL)
Weight (LST)
Rated power supply (VS)
Load resistive (min.)
Load capacitive (max.)
Current consumption
0.22 Kg
0.04 Kg
5 VDC
1K ohm
1 μF
16 mA
Mechanical
Angle of movement (LSL)
Angle of movement (LST)
Expected life (operations)
±20°
±30°
5 million
Environment
Operating temperature
Sealing above flange
Sealing with DN option
Sealing (LST)
-40 to +70 °C
IP65
IP44
IP66
Analog outputs
Active range (VDC out)
Resolution
10%-90% VS
<2mV
LSL Options
Handle switch, top E1
Mechanical detent DN
Solenoid detents
Type L1
Type L2
Type L3
VBAT (+12V, +24V)
Neutral only
VBAT (+24V)
B(-)
A(+) and B(-)
75% B(-)
Both levers are single-axis joysticks, 0.5 - 4.5 VDC,
intended for the proportional control of one doubleacting hydraulic function. The LSL has several options
including a manual neutral detent, a switch in the top
of the handle and solenoid detents at full stroke in
either the B (minus) direction or both A (plus) and B
(minus) directions. A solenoid detent at 75% in the B
(minus) direction is also available. The LSL and LST
can be mounted in the armrest or on the dashboard
in mobile vehicles. they have comfortable grips and
are easily actuated for good ergonomics.
The IQAN-LSL and LST are lightweight with small
installation dimensions. The levers are covered with
friction rubber on either side, to prevent the fingers
from slipping and to provide a comfortable feel.
Mounting screws are installed from underneath for a
clean appearance of dashboard, panel or armrest.
The IQAN-LSL has an IP65 rating above the flange
and the IQAN-LST with potted electronics, has
an IP66 rating. The cables for the levers have a
sealed, automotive type AMP junior-power timer
connector. Both units are designed for the outdoor
environment.
The IQAN-LSL and LST are spring centered, dual
sensor devices. The dual sensors provide 0.5 - 4.5
VDC and 4.5 - 0.5 VDC outputs which allows error
checking to meet high safety requirements. The
optional switch in the top of the LSL handle can be
used to detect operator presence. All inputs and
outputs are protected against short circuit to ground.
Description
IQAN-LSL-E0-//-//
IQAN-LST
Ordering PN
20011365
20011381
Consult datasheet and pricelist for other LSL options
and ordering part numbers.
111
112
42
53
48
ø26
90
32
units=mm
29
15
Parker Hannifin Corporation
Hydraulic Valve Division
Elyria, Ohio USA
Components, sensors
IQAN-SP
Catalog HY14-1825/US
Technical information
Application
The IQAN-SP pressure transducers belong to the
family of IQAN accessories developed to complement
IQAN control systems. IQAN-SP is a range of 0-5V
pressure transducers for mobile hydraulic applications.
These transducers are available in two pressure
ranges; 35 bar (500 psi) and 500 bar (7300 psi).
The IQAN-SP has stainless steel construction for
strength. The sensor cells use thin film technology
with no internal o-rings or fluid. The sensors are very
robust and able to withstand heavy vibrations.
General
Weight
Connectors
B
D
Threaded interfaces
B type only
D type only
Operating temperature
Enclosure
The design of the IQAN-SP has an EMI cap that
separates the sensor electronics from the connector
to ensure a high level of EMI protection.
0.060 kg
The two interface types of the IQAN-SP are well
designed for the mobile hydraulics industry. The first
type, -S, has a G1/4 thread. The hex of the transducer
has an integrated face seal to eliminate sealing
washers.The integral 3 pin connector is a sealed AMP
Junior Power Timer type designed for automotive use.
The second type, -D, has a SAE 6 (9/16"-18) thread.
The connector on this type is a 4 pin Deutsch DT style
and is attached via a short cable. Both connector types
give the sensors IP65 protection for exposed outdoor
applications.
Bosch
(AMP Junior Timer)
Deutsch DT04-4P
1/4”-19 BSP with
integral face seal
9/16”-18 UNF, SAE 6
with nitrile o-ring seal
-40 to +125°C
IP65
Performance
Pressure range
Description
IQAN-SP035-B
IQAN-SP500-B
IQAN-SP035-D
IQAN-SP500-D
0 - 35 bar,
0 - 500 bar
Total error (-40°C to 105°C)1) Max 4.0 % FS
Total error ( 40°C to 80°C)1) Max 1.0 % FS
Response time2)
5.0 msec
Over pressure SP035
Max 100 bar
Over pressure SP500
Max 1050 bar
Burst pressure SP035
Min 150 bar
Burst pressure SP500
Min 1500 bar
Ordering PN
5020026
5020027
2820008
2820009
1) Total accuracy includes non- linearity, hysteresis,
repeatability and temperature effects.
2) Measured from initial value to output at 90%.
Electrical specifications
Output at FS3)
Zero output3)
Supply Voltage(Vs)
Current supply
Load resistor
Load capacitor
4.5 VDC
0.5 VDC
5.0 ±10% VDC4)
Max 12.5 mA
Min 5k ohm
Max 0.1 μF
ø22
G -1/4
63
length = 400
3) The output is ratiometric to supply voltage (Vs)
4) The max supply voltage with sensor operating
is 6 Volt. (switch off app. 6.2 Volt)
ø22
SAE - 6
59
units=mm
16
Parker Hannifin Corporation
Hydraulic Valve Division
Elyria, Ohio USA
Components, sensors
IQAN-ST
Catalog HY14-1825/US
Technical information
Application
The IQAN-ST temperature transducer belongs
to the family of IQAN accessories developed to
complement IQAN control systems. IQAN-ST is a
0-5V output temperature transducer for mobile
hydraulic applications. This transducer is available
in three interface types; G1/4 BSP, M10 and 9/16”18 UNF SAE 6. The G1/4 BSP and M10 sensors
have an integral Bosch automotive connector. The
SAE 6 sensor has a short cable-mounted Deutsch
connector.
General
Weight
Operating temperature
Protection
Pressure rating
G (1/4 BSP)
M (M10)
U (SAE 6)
Electrical
Voltage supply VS
Max 6 Vdc
Current consumption
50 g
-50 to 150°C
outdoor use
Output
FS (150°C)
Zero (-50°C)
Span
Ratiometricity
Linearity
4.75 Vdc
0.25 Vdc
4.50 Vdc
1%
1% FS
U
Connectors
B
D
The IQAN-ST is well designed for the mobile hydraulics
industry. The 3 pin integral Bosch connector is a sealed
AMP Junior Timer type. The Deutsch connector is
the DT04 type. Both connectors are designed for
automotive use. These connectors give the sensor IP65
protection for exposed outdoor applications. The hex
of the G1/4 BSP and M10 versions of the transducer
have integrated face seals to eliminate loose sealing
washers. The SAE 6 sensor type has a factory installed
O-ring. These features provide for easy installation and
removal, even in field conditions.
5±0.5 Vdc
Total error (25°C)
Total error (-40 to 150°C)
M
The design of the IQAN-ST has an EMI cap that
separates the sensor electronics from the connector.
This ensures a high level of EMI protection.
Max 700 bar
Max 350 bar
Max 1000 bar
5.0 μA
Max 7.5 μA
1%
4%
Threaded interfaces
G
The IQAN-ST has stainless steel construction for
strength. The PT100 sensor uses thin film technology
with internal amplification. All versions of the sensor
have high pressure capability. The IQAN-ST is very
robust and able to withstand heavy vibrations.
Description
IQAN-ST-G-B
IQAN-ST-M-B
IQAN-ST-U-D
1/4”-19 BSP with
integral face seal
M10 x 1, with
integral face seal
9/16”-18 UNF, SAE 6
with nitrile o-ring seal
Ordering PN
20073657
20073659
20073658
ø23
Bosch
(AMP Junior Timer)
Deutsch DT04-4P
M10
ø23
39
G -1/4
39
ø23
length = 400
SAE - 6
36
units=mm
17
Parker Hannifin Corporation
Hydraulic Valve Division
Elyria, Ohio USA
Catalog HY14-1825/US
Technical information
Components, sensors
IQAN compatible Parker sensors
Ferrous proximity sensors
01695
FP2000 proximity sensor is a normally open, ferrous
proximity sensor for mobile hydraulic applications
and will sense ferrous objects.
cable length: 12 inches
connector: Deutsch DTM04-2P
01699
FP3000 proximity sensor is a normally open, ferrous
proximity sensor for mobile hydraulic applications
and will sense ferrous objects.
cable length: 12 inches
connector: Deutsch DTM04-2P
01703
FP4000 proximity sensor is a normally open, high
power, ferrous proximity sensor for mobile hydraulic
applications and will sense ferrous objects.
cable length: 12 inches
connector: Deutsch DTM04-4P
Rotary sensors
01705
RF50 rotary friction sensor is a 0-5Vdc output,
non-contact, friction lock rotary control for mobile
hydraulic applications.
cable length: 12 inches
connector: Deutsch DTM04-3P
01707
RS70 rotary sensor is a 0-5Vdc, dual output, noncontact 170° rotary sensor for mobile hydraulic
applications.
cable length: 12 inches
connector: Deutsch DTM04-6P
01708
RS60 rotary sensor is a 0-5Vdc, dual output,
through hole coupling, non-contact 120° rotary
sensor for mobile hydraulic applications.
cable length: 12 inches
connector: Deutsch DTM04-6P
01709
RS52 rotary sensor is a 0-5Vdc, single output,
non-contact, 90° rotary sensor for mobile hydraulic
applications.
cable length: 12 inches
connector: Deutsch DTM04-3P
Linear sensors
01710
ADS50 sensor is a 25mm [1.0”] travel, lever
actuated, 0-5Vdc linear output, non-contact, analog
sensor for mobile hydraulic applications.
cable length: 12 inches
connector: Deutsch DTM04-3P
18
Parker Hannifin Corporation
Hydraulic Valve Division
Elyria, Ohio USA
Catalog HY14-1825/US
Technical information
Components, sensors
IQAN compatible Parker sensors
Speed sensors
01711
GS50 geartooth sensor is a digital output, noncontact, flange mount, ferrous sensor for mobile
hydraulic applications.
cable length: 12 inches
connector: Deutsch DTM04-3P
01712
GS60 geartooth sensor is a digital output, noncontact, threaded barrel mount, ferrous sensor for
mobile hydraulic applications.
cable length: 12 inches
connector: Deutsch DTM04-3P
Tilt sensors
01715
RM50 rolling magnet switch is a one axis tilt switch
for mobile hydraulic applications.
sensitivity: ±10 degrees
cable length: 12 inches
connector: Deutsch DTM04-2P
01716
ATS90 dual axis sensor is a two axis, 0-5Vdc,
non-contact, Hall effect angle/tilt sensor for mobile
hydraulic applications.
range: ±10 degrees each axis
cable length: 12 inches
connector: Deutsch DTM04-4P
01759
ATS50 single axis sensor is a one axis, 0-5Vdc,
non-contact, Hall effect angle/tilt sensor for mobile
hydraulic applications.
range: ±10 degrees
cable length: 12 inches
connector: Deutsch DTM04-3P
Acceleration sensors
01767
ACC50 acceleration sensor is a 0-5 Vdc output
accelerometer used to sense vibration, impact,
tilt and motion for mobile hydraulic applications.
sensitivity: ±5g
cable length: 12 inches
connector: Deutsch DTM04-3P
19
Parker Hannifin Corporation
Hydraulic Valve Division
Elyria, Ohio USA
Catalog HY14-1825/US
Technical information
Accessories
IQAN tools and communication cables
Tools
Communication cables
5031061
Medium duty service kit
contents: 3 crimping tools
1 5031057 pin box
1 5035003 extractor set
crimping tools not sold separately
5030024
RS232-cable
length: 1,5 meters
use with: IQAN-MDM, -TOC8,
-TOC2 (TOC's require adapter)
5030080
Remote diagnostics-cable
length: 1,5 meters
use with: IQAN-MDM, -TOC8,
-TOC2 (TOC's require adapter)
5031057
Pin box, JPT and MT parts
contents: qty
AMP/Tyco PN
100
962945-2
100
963531-1
100
963530-1
100
963711-2
50
927779-1
25
927777-1
25
828922-1
25
929938-1
50
929940-1
25
2-963745-1
50
828904-1
25
828905-1
AMP parts not sold separately
5030089
Adapter-cable, panel mount
length: 0,4 meters
use with: IQAN-TOC8, -TOC2
5030096
Palm PDA-cable (for T, T2, T3)
length: 1,5 meters
use with: IQAN-MDM, -TOC8,
-TOC2 (TOC's require adapter)
5030103
RS232-cable
length: 1,5 meters
use with: IQAN-MDL
5035003
Set of 3 extraction tools, stamped
contents: 1 JPT extractor (yellow)
1 MT extractor (blue)
1 pin extractor (red)
stamped tools not sold separately
5030110
USB-cable
length: 1,5 meters
use with: IQAN-MDL
12000199
Extraction tool, hardened alloy
contents: 1 MT extractor (blue)
5030124
USB adapter-cable, panel mount
length: 0,4 meters
use with: IQAN-MC2, -MD3
12003099
Extraction tool, hardened alloy
contents: 1 JPT extractor (yellow)
Consult "IQAN accessories" datasheet and pricelist for
other accessory items and ordering part numbers.
20
Parker Hannifin Corporation
Hydraulic Valve Division
Elyria, Ohio USA
Catalog HY14-1825/US
Technical Information
Accessories
IQAN prototype cables and connector kits
Prototype installation cables
Connector kits
5030025
C1-cable, no seals
length: 2,5 meters
use with: IQAN-MDL
5031007
C1-connector, 2 position
use with: Temperature sensor
5031022
C1-connector, 6 position
use with: IQAN-MDM
5030027
CAN/PWR/IO-cable, no seals
length: 2,5 meters
use with: IQAN-LL, -LM
5031048
C1 and C2 -connectors, 12 pos.
use with: IQAN-LL, -LM
5030029
C1-cable, with seals
length: 2,5 meters
use with: IQAN-MDM
5031063
C1-connector, 42 position
use with: IQAN-XA2, -XS2, -XT2,
-XP2, -TOC8, -MDL, -MC2
5030030
C1-cable, with seals
length: 2,5 meters
use with: IQAN-XA2, -XS2, -XT2,
-XP2, -TOC8, -MC2
5031086
C1-connector, 3 position
use with: IQAN-SPxxx-S
5030090
C1-cable, with seals
length: 2,5 meters
use with: IQAN-TOC2
5031097
C1-connector, 4 position
use with: IQAN-LST, -LSL
5031098
C2-connector, 2 position
use with: IQAN-LSL options
5030094
C1-cable, with seals
length: 2,5 meters
use with: IQAN-LST, -LSL
5031105
C1-connector, 16 position
use with: IQAN-TOC2
5030095
C2-cable, with seals
length: 2,5 meters
use with: IQAN-LSL options
20073081
C1-connector (grey), 12 position
C2-connector (black), 12 position
use with: IQAN-MD3
5030125
C1-cable, sealed
length: 2,5 meters
use with: IQAN-MD3
5030126
C2-cable, sealed
length: 2,5 meters
use with: IQAN-MD3
Consult "IQAN accessories" datasheet and pricelist for
other accessory items and ordering part numbers.
21
Parker Hannifin Corporation
Hydraulic Valve Division
Elyria, Ohio USA
IQAN sales tools
IQAN compatibility matrix
Catalog HY14-1825/US
Appendix A
IQAN compatibility matrix
CAN system Masters
Software
and
CAN modules
IQAN
design
MDL
D
MD3
MDM
D
IQAN
develop
Standalone units
MC2
TOC2
D
D
D
D
XA2
D
D
D
XS2
D
D
D
XT2
D
D
D
D
Lx
D
D
D
D
XP2
TOC8
D
22
Parker Hannifin Corporation
Hydraulic Valve Division
Elyria, Ohio USA
Catalog HY14-1825/US
Terms of Sale with Warranty Limitations
Offer of Sale
The items described in this document and other documents or descriptions provided by Parker Hannifin Corporation, its subsidiaries and its authorized distributors are hereby offered for sale at prices to be established by Parker Hannifin Corporation, its subsidiaries and its authorized distributors.
This offer and its acceptance by any customer ("Buyer") shall be governed by all of the following Terms and Conditions. Buyer’s order for any such
items, when communicated to Parker Hannifin Corporation, its subsidiary or an authorized distributor ("Seller") verbally or in writing, shall constitute
acceptance of this offer.
1. Terms and Conditions of Sale: All descriptions, quotations, proposals,
offers, acknowledgments, acceptances and sales of Seller’s products are
subject to and shall be governed exclusively by the terms and conditions
stated herein. Buyer’s acceptance of any offer to sell is limited to these
terms and conditions. Any terms or conditions in addition to, or inconsistent with those stated herein, proposed by Buyer in any acceptance of
an offer by Seller, are hereby objected to. No such additional, different
or inconsistent terms and conditions shall become part of the contract
between Buyer and Seller unless expressly accepted in writing by Seller.
Seller’s acceptance of any offer to purchase by Buyer is expressly conditional upon Buyer’s assent to all the terms and conditions stated herein,
including any terms in addition to, or inconsistent with those contained in
Buyer’s offer, Acceptance of Seller’s products shall in all events constitute
such assent.
2. Payment: Payment shall be made by Buyer net 30 days from the date
of delivery of the items purchased hereunder. Amounts not timely paid
shall bear interest at the maximum rate permitted by law for each month
or portion thereof that the Buyer is late in making payment. Any claims
by Buyer for omissions or shortages in a shipment shall be waived unless Seller receives notice thereof within 30 days after Buyer’s receipt
of the shipment.
3. Delivery: Unless otherwise provided on the face hereof, delivery shall
be made F.O.B. Seller’s plant. Regardless of the method of delivery, however, risk of loss shall pass to Buyer upon Seller’s delivery to a carrier.
Any delivery dates shown are approximate only and Seller shall have no
liability for any delays in delivery.
4. Warranty: Seller warrants that the items sold hereunder shall be free
from defects in material or workmanship for a period of 18 months from
date of shipment from Parker Hannifin Corporation. THIS WARRANTY
COMPRISES THE SOLE AND ENTIRE WARRANTY PERTAINING TO
ITEMS PROVIDED HEREUNDER. SELLER MAKES NO OTHER WARRANTY, GUARANTEE, OR REPRESENTATION OF ANY KIND WHATSOEVER. ALL OTHER WARRANTIES, INCLUDING BUT NOT LIMITED
TO, MERCHANTABILITY AND FITNESS FOR PURPOSE, WHETHER
EXPRESS, IMPLIED, OR ARISING BY OPERATION OF LAW, TRADE
USAGE, OR COURSE OF DEALING ARE HEREBY DISCLAIMED.
NOTWITHSTANDING THE FOREGOING, THERE ARE NO WARRANTIES WHATSOEVER ON ITEMS BUILT OR ACQUIRED WHOLLY OR
PARTIALLY, TO BUYER’S DESIGNS OR SPECIFICATIONS.
5. Limitation Of Remedy: SELLER’S LIABILITY ARISING FROM OR IN
ANY WAY CONNECTED WITH THE ITEMS SOLD OR THIS CONTRACT
SHALL BE LIMITED EXCLUSIVELY TO REPAIR OR REPLACEMENT
OF THE ITEMS SOLD OR REFUND OF THE PURCHASE PRICE PAID
BY BUYER, AT SELLER’S SOLE OPTION. IN NO EVENT SHALL
SELLER BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL OR
SPECIAL DAMAGES OF ANY KIND OR NATURE WHATSOEVER,
INCLUDING BUT NOT LIMITED TO LOST PROFITS ARISING FROM
OR IN ANY WAY CONNECTED WITH THIS AGREEMENT OR ITEMS
SOLD HEREUNDER,WHETHER ALLEGED TO ARISE FROM BREACH
OF CONTRACT, EXPRESS OR IMPLIED WARRANTY, OR IN TORT,
INCLUDING WITHOUT LIMITATION, NEGLIGENCE, FAILURETO WARN
OR STRICT LIABILITY.
6. Changes, Reschedules and Cancellations: Buyer may request to
modify the designs or specifications for the items sold hereunder as well
as the quantities and delivery dates thereof, or may request to cancel
all or part of this order, however, no such requested modification or
cancellation shall become part of the contract between Buyer and Seller
unless accepted by Seller in a written amendment to this Agreement.
Acceptance of any such requested modification or cancellation shall be
at Seller’s discretion, and shall be upon such terms and conditions as
Seller may require.
7. Special Tooling: A tooling charge may be imposed for any special
tooling, including without limitation, dies, fixtures, molds and patterns,
acquired to manufacture items sold pursuant to this contract. Such special
tooling shall be and remain Seller’s property notwithstanding payment of
any charges by Buyer. In no event will Buyer acquire any interest in apparatus belonging to Seller which is utilized in the notwithstanding any
charges paid by Buyer. Unless otherwise agreed, Seller shall have the
right to alter, discard or otherwise dispose of any special tooling or other
property in its sole discretion at any time.
8. Buyer’s Property: Any designs, tools, patterns, materials, drawings,
confidential information or equipment furnished by Buyer or any other
items which become Buyer’s property, may be considered obsolete and
may be destroyed by Seller after two (2) consecutive years have elapsed
without Buyer placing an order for the items which are manufactured using
such property, Seller shall not be responsible for any loss or damage to
such property while it is in Seller’s possession or control.
9. Taxes: Unless otherwise indicated on the face hereof, all prices and
charges are exclusive of excise, sales, use, property, occupational or like
taxes which may be imposed by any taxing authority upon the manufacture, sale or delivery of the items sold hereunder. If any such taxes must
be paid by Seller or if Seller is liable for the collection of such tax, the
amount thereof shall be in addition to the amounts for the items sold. Buyer
agrees to pay all such taxes or to reimburse Seller therefore upon receipt
of its invoice. If Buyer claims exemption from any sales, use or other tax
imposed by any taxing authority, Buyer shall save Seller harmless from
and against any such tax, together with any interest or penalties thereon
which may be assessed if the items are held to be taxable.
10. Indemnity For Infringement of Intellectual Property Rights: Seller
shall have no liability for infringement of any patents, trademarks, copyrights, trade dress, trade secrets or similar rights except as provided in
this Part 10. Seller will defend and indemnify Buyer against allegations
of infringement of U.S. Patents, U.S. Trademarks, copyrights, trade dress
and trade secrets (hereinafter ‘Intellectual Property Rights’). Seller will
defend at its expense and will pay the cost of any settlement or damages
awarded in an action brought against Buyer based on an allegation that
an item sold pursuant to this contract infringes the Intellectual Property
Rights of a third party. Seller’s obligation to defend and indemnify Buyer
is contingent on Buyer notifying Seller within ten (10) days after Buyer
becomes aware of such allegations of infringement, and Seller having
sole control over the defense of any allegations or actions including all
negotiations for settlement or compromise. If an item sold hereunder is
subject to a claim that it infringes the Intellectual Property Rights of a
third party, Seller may, at its sole expense and option, procure for Buyer
the right to continue using said item, replace or modify said item so as to
make it noninfringing, or offer to accept return of said item and return the
purchase price less a reasonable allowance for depreciation. Notwithstanding the foregoing, Seller shall have no liability for claims of infringement
based on information provided by Buyer, or directed to items delivered
hereunder for which the designs are specified in whole or part by Buyer,
or infringements resulting from the modification, combination or use in a
system of any item sold hereunder. The foregoing provisions of this Part
10 shall constitute Seller’s sole and exclusive liability and Buyer’s sole and
exclusive remedy for infringement of Intellectual Property Rights.
If a claim is based on information provided by Buyer or if the design for an
item delivered hereunder is specified in whole or in part by Buyer, Buyer
shall defend and indemnify Seller for all costs, expenses or judgments
resulting from any claim that such item infringes any patent, trademark,
copyright, trade dress, trade secret or any similar right.
11. Force Majeure: Seller does not assume the risk of and shall not be
liable for delay or failure to perform any of Seller’s obligations by reason
of circumstances beyond the reasonable control of Seller (hereinafter
‘Events of Force Majeure’). Events of Force Majeure shall include without
limitation, accidents, acts of God, strikes or labor disputes, acts, laws,
rules or regulations of any government or government agency, fires,
floods, delays or failures in delivery of carriers or suppliers, shortages of
materials and any other cause beyond Seller’s control.
12. Entire Agreement/Governing Law: The terms and conditions set
forth herein, together with any amendments, modifications and any different terms or conditions expressly accepted by Seller in writing, shall
constitute the entire Agreement concerning the items sold, and there are
no oral or other representations or agreements which pertain thereto.
This Agreement shall be governed in all respects by the law of the State
of Ohio. No actions arising out of the sale of the items sold hereunder or
this Agreement may be brought by either party more than two (2) years
after the cause of action accrues.
9/91-P
23
Parker Hannifin Corporation
Hydraulic Valve Division
Elyria, Ohio USA
Extensive Hydraulic Product Offering
Compact Hydraulics
Cylinders
Piston, bladder and diaphragm type accumulators,
gas bottles and KleenVent
reservoir isolators.
Self-contained with a motor, gear pump, reservoir,
internal valving, load hold
checks and relief valves.
Standard and custom
hydraulic cylinders for
industrial and mobile
applications.
Parker’s unique IQAN
approach combines sturdy,
well-tested hardware with
LQWHOOLJHQWÀH[LEOHFRPSXWing power.
www.parker.com/accumulator
www.parker.com/oildyne
www.parker.com/hydcyl
www.parker.com/iqan
Filtration
Integrated Hydraulic
Circuits
Motors
Power Take Off
Pressure and return line
¿OWHUVHQKDQFHVPDFKLQH
life, reduces maintenance
and lowers costs.
6ROXWLRQVIRUFRPSOH[FLUcuits that include threaded
cartridge valves integrated
into a single manifold.
Full line of high and low
speed motors provides
power up to 15,000 in-lbs
of torque.
Parker Chelsea leads the
industry for engineering,
innovation and performance
LQDX[LOLDU\SRZHUV\VWHPV
Accumulators
Electronic Control
Systems
www.parker.com/hydraulicfilter
www.parker.com/ihd
www.parker.com/pumpmotor
www.parker.com/chelsea
Power Units
Pumps
Rotary Actuator
Valves and Controls
The most complete line of
standard, pre-engineered,
cataloged hydraulic power
units in the industry.
%URDGOLQHRIHQHUJ\HI¿cient hydraulic pumps that
includes piston, vane and
gear pumps.
Industry leader in the design
and manufacture of hydraulic rack and pinion, and
vane style rotary actuators.
Hydraulic valves for virtually every hydraulic equipment
application, from simple to
precise control.
www.parker.com/pumpmotor
www.parker.com/mobpump
www.parker.com/actuator
www.parker.com/hydraulicvalve
Covering the Industrial,
Mobile and Truck markets,
each catalog is paired with
an interactive CD. Call for
your comprehensive guides
today. 1-800-CParker
Industrial Bulletin
HY01-1000/US
Mobile Bulletin
HY19-1001/US
Truck Bulletin
HY19-1004/US
Parker Hydraulics International Sales Offices
North America
Mobile Sales
Asia Pacific
Hydraulics Group Headquarters
6035 Parkland Boulevard
Cleveland, OH 44124-4141 USA
Tel: 216-896-3000
Fax: 216-896-4031
Mobile Sales Organization
and Global Sales
595 Schelter Road
Suite 100
Lincolnshire, IL 60069 USA
Tel: 847-821-1500
Fax: 847-821-7600
Asia Pacific Headquarters
Parker Hannifin Hong Kong Ltd
8/F, Kin Yip Plaza
9 Cheung Yee Street
HK-Cheung Sha Wan, Hong Kong
Tel: 852 2428 8008
Fax: 852 2425 6896
Industrial Sales
Australia Headquarters
Parker Hannifin Pty Ltd.
9 Carrington Road
Castle Hill, NSW 2154, Australia
Tel: 612 9634 7777
Fax: 612 9842 5111
Parker Hannifin Canada
Motion & Control Division – Milton
160 Chisholm Drive Milton
Ontario Canada L9T 3G9
Tel: 905-693-3000
Fax: 905-876-1958
Mexico
Parker Hannifin de México
Av eje uno norte num 100
Parque Industrial Toluca 2000
Toluca, Mex C.P. 50100
Tel: 52 722 2754200
Fax: 52 722 2799308
Europe
Great Lakes Region
3700 Embassy Parkway
Suite 260
Fairlawn, OH 44333 USA
Tel: 330-670-2680
Fax: 330-670-2681
Southern Region
1225 Old Alpharetta Road
Suite 290
Alpharetta, GA 30005 USA
Tel: 770-619-9767
Fax: 770-619-9806
Europe Hydraulics Group
Parker Hannifin Corporation
Parker House
55 Maylands Avenue
Hemel Hempstead, Herts
HP2 4SJ England
Tel: 44 1442 458000
Fax: 44 1442 458085
Chicago Region
1163 E. Ogden Avenue
Suite 705, #358
Naperville, IL 60563 USA
Tel: 630-964-0796
Fax: 866-473-9274
Latin America
Pacific Region
8460 Kass Drive
Buena Park, CA 90621
Tel: 714-228-2510
Fax: 714-228-2511
Brazil
Hydraulics Division
Parker Hannifin Ind. e Com. Ltda
Av. FredericoRitter, 1100
Cachoeirinha RS, 94930-000 Brazil
Tel: 55 51 3470 9144
Fax: 55 51 3470 3100
Eastern Region
100 Corporate Drive
Lebanon, NJ 08833 USA
Tel: 908-236-4121
Fax: 908-236-4146
China Headquarters
Parker Hannifin Motion & Control
(Shanghai) Co., Ltd
280 Yunqiao Road,
Jin Qiao Export Processing Zone
CN-Shanghai 201206, China
Tel: 86 21 5031 2525
Fax: 86 21 5834 3714
Korea Headquarters
Parker Hannifin Korea Ltd
6F Daehwa Plaza
169 Samsung-dong, Gangnam-gu
KR-Seoul, 135-090, Korea
Tel: 82 2 559 0400
Fax: 82 2 556 8187
South Africa
Parker Hannifin Africa Pty Ltd
Parker Place
10 Berne Avenue Aeroport
P.O. Box 1153
ZA-Kempton Park 1620,
Republic of South Africa
Tel: 27 11 961 0700
Fax: 27 11 392 7213
Catalog HY14-1825/US. 0.5M 01/2008
Parker Hannifin Corporation
Hydraulic Valve Division
520 Ternes Avenue
Elyria, OH 44035 USA
phone 440 366 5200
fax 440 366 5253
www.parker.com
Your Local Authorized Parker Distributor