Kandolite KMLSP60W User manual

USER MANUAL
KMLSP60W
Index
Summarize ......................................................................... 3
Statement .......................................................................... 3
Safety instruction ............................................................... 4
Installation instruction ........................................................ 5
Display operation instruction............................................... 6
DMX controller function ....................................................... 7
XRL connection instruction .................................................. 9
General troubleshooting .....................................................10
Maintenance.......................................................................10
Lamp cleaning……………...………….…………………………..………11
Technical’s specification…………….………………………..……..…12
Summarize
Thank you for purchasing our LED Moving lighting. Please read these instructions
carefully before begin and operate the fixtures according to these instructions to
avoid any possible damages and accidents causes by misusage.
Statement
Thank you choosing our professional KMLSP60W LED moving head light
This user guide includes very important to guarantee the safe and proper use of
the light, please read carefully and operate according to the instruction
The moving head light applied advanced design and processing technique,
adopted new type high intensity high temperature resistant engineering injected
plastics. With modern, streamlined and beautiful outlook.
The product has well capability and intact packing when leaving factory. All the
users should comply with above warning item and operation. Any misuses causing
the damages are not included in our guarantee. Any dealers won’t be responsible
for any malfunction & problem owing to ignoring the manual.
Please forgive that we will not notice for technical changing
Safety Information
! Enquire the skilled people before any repair;
! Always make sure disconnect from the power source before setting up, serving and
moving;.
! Avoid direct eye exposure to the fixture when it is on;
Packing list
• KMLSP60W
1PC
• Power cable
• user manual
Page 3 of 13
Safety instruction
•
Please consult eligible personas before maintenance
•
Please make sure the power supply has been cut off during installation,
maintenance, and transportation.
•
Please do not use power supply and lamps of different specifications
•
During operation, the high temperature the light creates might lead to
danger, therefore please don’t put any inflammable and explosive things
around the light, and please don’t touch the light body during operation.
•
Make sure there is more than 1 meter between the light and the irradiated
objects
•
In order to avoid harming your eyes, please don not lock at the light beam
directly
Page 4 of 13
Installation instruction
Dimension Diagram
•
The product is suitable for indoor use only, operation temperature is below
35 degree
•
The installation, operation and maintenance persons must get familiar with
the light performance before operation, so that to avoid damage during
transportation before fist usage
•
Before changing the LED module, please make sure the electric power is cut
off and the lamp is cooled off. (bulb temperature can reach abobe 200
degree.)
•
Cover the small lid.
•
Install the product in well ventilated places and please note to check
whether the fan and the fan are unimpeded or not
•
Connect the bicolor line (yellow and green) to the ground.
Page 5 of 13
Display Operation
MENU
: access the menu or return to a previous menu option
ENTER : select the current menu option
UP
: menu selection or parameter increments
DOWN : menu selection or parameters decrease
•
Address code
•
Reset
•
Auto
•
Fast
•
Slow
•
Sound
•
Slave
•
Pan reversal
•
Tilt reversal
•
Channels option
•
9 channels
•
10 channels
•
15 channels
•
Load default
Page 6 of 13
DMX Control Function
Mode 9
Mode 10
Mode 15
DMX value
control function
CH 1
CH 1
CH 1
0 - 255
X : Pan
CH 2
CH 2
CH 2
0 - 255
Y : Tilt
CH 3
0 - 255
X : Pan, Fine
CH 4
0 - 255
Y: Tilt, fine
CH 3
CH 3
CH 5
0 - 255
X, Y : Pan / Tilt speed, fast to slow
CH 4
CH 4
CH 6
0 - 255
intensity Zero to full
shutter ,
0-7
CH 5
CH 5
CH 7
8 - 250
251 - 255
strobe
open
strobe. Slow to fast
open
color wheel
0 - 15
CH 6
CH 6
CH 8
open (white)
16 - 31
Red
32 - 47
Green
48 - 63
Blue
64 - 79
Yellow
80 - 95
Rose Red
96 - 111
112 - 128
Light Green
Light Blue
color river (clockwise of rotation,
129 - 191
slow to fast)
color river (anticlockwise of rotation,
192 - 255
slow to fast)
fix gobo wheel
0-6
CH 7
CH 9
open (white)
7 - 13
gobo 1
14 - 20
gobo 2
21 -27
gobo 3
28 - 34
gobo 4
35 - 41
gobo 5
42 - 48
gobo 6
49 - 55
gobo 7
56 - 62
gobo 8
63 - 69
gobo 8 (shake slow to fast)
70 - 76
gobo 7 (shake slow to fast)
77 - 83
gobo 6 (shake slow to fast)
84 - 90
gobo 5 (shake slow to fast)
91 - 97
gobo 4 (shake slow to fast)
98 - 104
gobo 3 (shake slow to fast)
105 - 111
gobo 2 (shake slow to fast)
112 - 118
gobo 1 (shake slow to fast)
119 - 125
open (white)
gobo river (clockwise of rotation ,
126 - 192
slow to fast)
gobo river (anticlockwise of
193 - 255
rotation , slow to fast)
gobo effect wheel
0 - 18
CH 7
CH 10
open (white)
19 - 37
gobo 1
38 - 56
gobo 2
57 - 75
gobo 3
76 - 94
gobo 4
95 - 113
gobo 5
114 - 127
gobo 6
gobo river (clockwise of rotation ,
128 - 191
slow to fast)
gobo river (anticlockwise of
192 - 255
rotation , slow to fast)
gobo rotation effect wheel
0-7
close
gobo clockwise of rotation , slow to
8 -119
CH 8
CH 8
CH 9
CH 11
CH 12
fast
gobo anticlockwise of rotation, slow
120 - 229
to fast
230 - 255
gobo rotation, slow to fast
0 - 255
focus
Prism
0- 15
CH 9
CH 0
CH 13
CH 14
CH 15
close
16 - 239
Prism , slow to fast
240 -255
stop
0 - 249
close
250 - 255
reset
0 - 127
close
128 - 255
pan, tilt macro program
Page 8 of 13
XLR cable connecting
XRL cable：
：
The stand connection way of the XRL is: one end connects to the male plug, and
the other connects to the female.
Noted：
In order to avoid failures and interference signal transmission，
we connect
a resistance120Ω（
1/4W）
at the end of the DMX connecting as below:
Page 9 of 13
The Conversion between 3pin and 5 pin XLR
If the output cable of DMX512 controller is the 5PIN, please use 1pc 5PIN to
3PIN cable
General troubleshooting
Failure description
Fail to start
The normal lamp is not
measure
Power fuse intact bulb
Inspect DMX start address setting
controlled by the controller Check XLR signal lines
Intermittent working
Inspect the dust and oil of the fans, whether the
dust plug fans and nets fans
Dim light, the brightness
decrease
Beam impurities (halo)
Bulbs expiry
Check whether the optical system is clean
Clean the dust and old of the light bulbs, lenses
and other components
Serious beam distortion
Check whether the lens is rupturing
Cleaning dust or oil
Noted: only professional persons can do as above！
Page 10 of 13
Maintenance
•
When the light has broken and other damage should be promptly replace.
•
When the light bulb has deformation, the damage should be immediately
replaced.
•
When the lamp not boot, check whether the lamp power supply fuse blown,
such as blown, fuse fitted on the corresponding specifications. Attention to
the need to use the same specifications of the fuse. Lamps equipped with
overheating protection device.
•
When the overheating protection device will automatically cut off power
supply.
•
When this happens, check whether the normal operation of the fan, fans
and whether or not there is dust plug the net to fine out after the start
troubleshooting lamps. But take note that qualified technical personnel are
allowed to carry out maintenance work.
Lamp cleaning
•
In order to ensure reliable use of lamps to maintain clean the lamp is very
necessary.
•
Cooling fan should be clean once every 15 days.
•
Internal and external optical lenses, reflectors and filter cleaning coating
must be carried out periodically to optimize light output efficacy.
•
Do not use any solvent contacting the chemical constituents of cleaning
filter coating.
•
Cleaning operation of the lamp, as the frequency and use the surrounding
environment, with a soft cloth when cleaning and general cleaning products
for cleaning glass, it is recommended at least every 20 days once clean
external optical system, at least every 30 / 60 days of a clean internal
optical system.
Page 11 of 13
•
Do not use alcohol and other organic solvents to clean lamp shell, so as
•
to avoid causing damage.
Technical Specification
•
Power supply
: AC 120v / 230v / 60/50Hz
•
Control
: DMX 512
•
Channels
: CH09, CH10 & CH15
•
Power consumption
: 140w
•
Light source
: 60w white color LED
•
Net weight
: 13.5Kg
•
General
: 15.5Kg
Page 12 of 13
Copyright 2012 KANDOLITE. All rights
reserved. Due to continuous improvements
and innovations, specifications may change
without notice.