USER’S MANUAL
USB2.0 5.25'' Multi Panel
Card Reader
USB2.0 2Port + 1394 1 Port + Audio
http://www.digitus.info/
Index
Introduction………………………………………………………………
Features………………………………………………………………….
Specification………………………………………….…………………..
Requirements……………………….……………………………………
Package contents………………………………….…………………….
Software Installation……………………….…………………………….
Hardware installation..……….………………………………………….
Page
2
3
2
2
3
4
8
http://www.digitus.info/
- Page 1 -
Introduction
This 5.25”Multi panel Card Reader/Writer supports the memory card as below
SD/Mini SD
Trans Flash card (optional)
MMC/RS-MMC
MS/ MS PRO/ MS Magic Gate / MS Memory Select Function/MS PRO Magic Gate/
MS PRO Ultra II/MS ROM Card/ MS PRO DUO/ MS DUO/MS PRO DUO Magic
Gate/MS DUO Magic Gate
SM (SMC) /XD Card
CFI / CFII/Micro Drive (MD).
Features
USB
OS
Support USB 2.0/1.1 Interface.
USB and ACPI compliant.
Support USB High-Speed 480Mb/Sec or Full-Speed at 12Mb/sec.
Truly Plug and Play automatic system configuration.
Windows 98SE, Windows 2000, Windows ME, Windows XP.
Specification
Interface
Universal Serial Bus (USB) Revision 1.1/2.0 device.
Secure Digital (SD) Card/(Mini SD)/TransFlash card. (optional)
/Multi Media Card (MMC) Card / RS-MMC.
Connectors list
Compact Flash (CFI/CFII) Card Type
IBM Micro Drive (MD) Type.
Smart Media flash Card.(SM/SMC)/ (XD picture card).
MS/MS PRO/MS Magic Gate / MS Memory Select
Function/MS PRO Magic Gate/MS PRO Ultra II /MS ROM
Card/MS PRO DUO/ MS DUO/ MS PRO DUO Magic Gate/MS
DUO Magic Gate
One Audio Mic phone jack.
One Audio Speaker jack.
Two USB external downstream ports.
http://www.digitus.info/
- Page 2 -
Transfer Rate
USB transfer rate: Support High speed : 480Mbps
Full speed :12Mbps
LED
Power LED
Active LED
Requirements
IBM PC/AT Compatible.
USB 2.0 Host card.
Windows 98SE, Windows ME, 2000 or Windows XP.
Packing contents
Item
USB 2.0 Multi panel Card Reader/Writer (with screws set)
Software CD Driver (With User’s Manual)
USB Connection Cable set:
*
Multi panel cable set
*
Power cable
*
Multi panel link cable set.
http://www.digitus.info/
- Page 3 -
Software Installation
Windows 98SE and Windows2000
Step1 Please Insert the Installation CD into CD-ROM.
Step2 Please double click “Driver” folder
Step3 Please double Click ” Setup.exe ” as below.
Step4: Please select your language for installation as below.
http://www.digitus.info/
- Page 4 -
Step5 Please click “Next” to continue.
Step6 Please click “Next” to continue.
http://www.digitus.info/
- Page 5 -
Step7: The driver has been setup successfully. Please re-start the computer and follow
Hardware installation as page 8
Step8 When you insert memory cards and double click “My Computer”,
it will be appeared as Compact Flash (CF), Memory Stick (MS),Secure Digital
(SD)/Multi Media Card and Smart Media after Hardware installation.
Step9: Please insert your memory cards and start to read and write.
http://www.digitus.info/
- Page 6 -
Windows ME and Windows XP+SP1 (SP2)
You do not need driver for installation if your Operation System is Windows ME or Windows
XP, the system will detect driver automatically.
Turn On your computer, system will auto detect and down load the driver. You will see 4 removable disk icons in your File Manager. Now you can start to use the Card
Reader/Writer. If you want to see 4 icons as below view for Multi Coloring icons, please follow step 1~ step7.
http://www.digitus.info/
- Page 7 -
Hardware Installation
Step1 Turn off your PC and open the case of PC.
Step2 Remove the 5.25 inch front panel cover .
Step3 Plug in the Cable1 connecter to the Multi Panel USB 1394 Audio connectors as below :
CONNECTION CABLE
Connection Description:
(A). IEEE1394 cable connector (Shrink Tube color – Black)
(B). USB 1 cable connector (Shrink Tube color–RED)
http://www.digitus.info/
(A)1394 (B)USB1
- Page 8 -
(C)Audio cable connector (shrink Tube color – Blue)
(D)IDE power cable connection view:
(C):AUDIO
(D): POWER CABLE
Step4 Insert the Multi Panel into 5.25” front panel.
http://www.digitus.info/
- Page 9 -
Step5 Screwing the Multi Panel with 4 screws in two sides of PC.
R1
L1
R2
L2
Side View
Step6 Fix the Bracket of Cable to the rear side of PC
Step7 Assemble the IDE System Power Connector.
http://www.digitus.info/
- Page 10 -
Step8 : Assemble the connector (A) and USB link cable set as below :
Cable View
Cable(external PC) with USB Hub
25pin D-Sub(male), and 2 phone jack, 1394, USB
Multi panel cable connection
Step9 Plug in the Cable to the PC computer for Mic, Speaker jacks and
USB port and 1394 port as above.
Step10: When you finish above steps, please turn on your PC to start use it.
B and C Plug to Sound Card or Sound onboard, Audio Line In (Microphone),
Audio Line Out (Speaker).
D Plug to IEEE 1394a connector.
E Plug to USB 2.0 Host connector.
http://www.digitus.info/
- Page 11 -
Connection view on PC
*** Main connectors for USB and 1394 port on PC and PCI card.
1. Plug in the Cable to USB 2.0 1394 Audio connector
With USB HUB (link to PCI card on PC) OR With USB HUB (link to USB on PC
http://www.digitus.info/
- Page 12 -