MODEL

M3D470KDE

VIZIO

QUICK

START

GUIDE

SLIM LED

SMART TV

FULL HD + 3D

FULL USER MANUAL AVAILABLE AT VIZIO.COM

IMPORTANT SAFETY INSTRUCTIONS

Your TV is designed and manufactured to operate within defined design limits. Misuse may result in electric shock or fire. To prevent your TV from being damaged, the following instructions should be observed for the installation, use, and maintenance of your TV.

Read the following safety instructions before operating your TV. Keep these instructions in a safe place for future reference.

To reduce the risk of electric shock or component damage, switch off the power before connecting other components to your TV.

• Read these instructions.

• Keep these instructions.

• Heed all warnings.

• Follow all instructions.

• Do not use this apparatus near water.

• Clean only with a dry cloth.

• Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

• Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

• Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

• Only use attachments/accessories specified by the manufacturer.

• Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus.

When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

 

• Unplug this apparatus during lightning storms or when unused for long periods of time.

• Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as when the power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally or has been dropped.

• Unplug the power cord before cleaning your TV.

• When moving your TV from an area of low temperature to an area of high temperature, condensation may form in the housing.

Wait before turning on your TV to avoid causing fire, electric shock, or component damage.

• A distance of at least three feet should be maintained between your TV and any heat source, such as a radiator, heater, oven, amplifier etc. Do not install your TV close to smoke. Operating your TV close to smoke or moisture may cause fire or electric shock.

• Slots and openings in the back and bottom of the cabinet are provided for ventilation. To ensure reliable operation of your TV and to protect it from overheating, be sure these openings are not blocked or covered. Do not place your TV in a bookcase or cabinet unless proper ventilation is provided.

• Never push any object into the slots and openings on your TV cabinet. Do not place any objects on the top of your TV. Doing so could short circuit parts causing a fire or electric shock. Never spill liquids on your TV.

• Your TV should be operated only from the type of power source indicated on the label. If you are not sure of the type of power supplied to your home, consult your dealer or local power company.

• Do not apply pressure or throw objects at your TV. This may compromise the integrity of the display. The manufacturer’s warranty does not cover user abuse or improper installations.

• The power cord must be replaced when using different voltage than the voltage specified. For more information, contact your dealer.

• When connected to a power outlet, power is always flowing into your TV. To totally disconnect power, unplug the power cord.

• The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of un-isolated, dangerous voltage within the inside of your TV that may be of sufficient magnitude to constitute a risk of electric shock to persons.

• Do not overload power strips and extension cords. Overloading can result in fire or electric shock.

• The wall socket should be installed near your TV and easily accessible.

• Only power of the marked voltage can be used for your TV. Any other voltage than the specified voltage may cause fire or electric shock.

• Do not touch the power cord during lightning. To avoid electric shock, avoid handling the power cord during electrical storms.

• Unplug your TV during a lightning storm or when it will not be used for long period of time. This will protect your TV from damage due to power surges.

• Do not attempt to repair or service your TV yourself. Opening or removing the back cover may expose you to high voltages, electric shock, and other hazards. If repair is required, contact your dealer and refer all servicing to qualified service personnel.

• WARNING: Keep your TV away from moisture. Do not expose your TV to rain or moisture. If water penetrates into your TV, unplug the power cord and contact your dealer. Continuous use in this case may result in fire or electric shock.

• Do not use your TV if any abnormality occurs. If any smoke or odor becomes apparent, unplug the power cord and contact your dealer immediately. Do not try to repair your TV yourself.

• Avoid using dropped or damaged appliances. If your TV is dropped and the housing is damaged, the internal components may function abnormally. Unplug the power cord immediately and contact your dealer for repair. Continued use of your TV may cause fire or electric shock.

• Do not install your TV in an area with heavy dust or high humidity. Operating your TV in environments with heavy dust or high humidity may cause fire or electric shock.

• Follow instructions for moving your TV. Ensure that the power cord and any other cables are unplugged before moving your TV.

• When unplugging your TV, hold the AC/DC power adapter, not the cord. Pulling on the power cord may damage the wires inside the cord and cause fire or electric shock. When your TV will not be used for an extended period of time, unplug the power cord.

• To reduce risk of electric shock, do not touch the connector with wet hands.

• Insert batteries in accordance with instructions. Incorrect polarities may cause the batteries to leak which can damage the remote control or injure the operator. Do not expose batteries to excessive heat such as sunshine, fire or the like.

• If any of the following occurs, contact the dealer:

- The power cord fails or frays.

- Liquid sprays or any object drops into your TV.

- Your TV is exposed to rain or other moisture.

- Your TV is dropped or damaged in any way.

- The performance of your TV changes substantially.

• This apparatus shall not be exposed to dripping or splashing and no objects fill with liquids, such as vases, shall be placed on the apparatus.

• The mains plug or appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.

• CAUTION - These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock, do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so.

h

The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated DANGEROUS VOLTAGE within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electrical shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product.

You may experience discomfort while watching 3D content. You may feel symptoms of eye strain, vision fatigue, color or depth distortion, motion sickness, nausea, dizziness, disorientation, or other discomforts.

If you experience any of these symptoms, stop watching and take a break for at least thirty minutes before resuming. If the symptoms are severe or continue even after you have stopped watching 3D content, consult a doctor.

Take care to monitor children’s watching of 3D content. Children (including teenagers) may be more at risk of experiencing discomfort while watching 3D content and less likely to report symptoms. Monitor children’s 3D content viewing and watch for signs of discomfort.

Some viewers may be susceptible to epileptic seizures or strokes when viewing 3D images, even if those conditions have not been previously diagnosed. If you or anyone in your family has a history of seizures or strokes, or if you have any other reason to think you or someone under your supervision may be susceptible to epileptic seizures or strokes, consult a doctor before watching 3D content.

Even if you do not experience any of the above symptoms, take regular breaks from watching 3D content.

PACKAGE CONTENTS

Theater 3D LED HDTV with VIZIO Internet Apps

INPUT

CC

EXIT

BACK

VOL

VOL

7

3D

1

4

INFO

MENU

OK

2

5

8

0

GUIDE

3

6

9

CH

CH

INPUT

CC

EXIT

BACK

VOL

VOL

7

3D

1

4

INFO

MENU

OK

2

5

8

0

GUIDE

3

6

9

CH

CH

4 x M4 10mm Screws

4 x M6 10mm Screws

Remote Control with

Full Keyboard and Batteries

Basic Theater 3D

Glasses (4 pairs)

Glasses may vary slightly from those shown.

This Quick Start Guide

HELP VIZIO REDUCE PAPER WASTE.

DOWNLOAD THE FULL USER MANUAL AT

VIZIO.COM/SUPPORT

DO YOU HAVE QUESTIONS?

LET US HELP!

YOUR PRODUCT INCLUDES FREE LIFETIME TECH SUPPORT

The VIZIO support team is highly trained and is based in the United States.

We can help with:

•

New Product Setup

•

Connecting Your Devices

•

Technical Problems

•

And More

Phone:

Email:

Web:

(877) 878-4946

(TOLL-FREE)

[email protected]

www.VIZIO.com/support

Hours of operation:

Monday - Friday: 5 AM TO 9 PM

(PST)

Saturday - Sunday: 8 AM TO 4 PM

(PST)

We speak English • Se habla Español • Nous parlons Français

USING THE REMOTE

INPUT

Change the currently-displayed input.

A/V CONTROLS

CLOSED CAPTIONS

Open the closed caption menu.

CC

INFO

EXIT

MENU

OK

Select the highlighted menu option.

BACK

OK

GUIDE

BACK

Go to the previous on-screen menu.

VOL

APP SHORTCUTS

Control Internet Apps. Press Red to exit apps.

VOL CH

VOLUME UP/DOWN

1 3

4

5

8

9

3D

0

NUMBER PAD

Manually enter a channel.

3D

Switch the 3D display mode.

APP LAUNCHER

Quickly launch the pictured app.

INPUT

CC

EXIT

INFO

MENU

OK

BACK

GUIDE

VOL

VOL

7

3D

4

1

8

0

2

5

3

6

9

CH

CH

POWER

Turn TV on or off.

INFO

Display the info window.

MENU

Display the on-screen menu.

ARROW

Navigate the on-screen menu.

GUIDE

Display the info window.

V BUTTON

Open the VIA dock.

CHANNEL UP/DOWN

Change the channel.

LAST

Return to the channel last viewed.

DASH

Use with number pad to manually enter a digital sub-channel. (For example,

18-4 or 18-5.)

BATTERY COMPARTMENT

Insert 2 AAA batteries here.

DO NOT COVER THIS AREA

This is the transmitter.

ARROW

Navigate the on-screen menu.

SHIFT

Press and hold while pressing another key to enter a capital letter.

ALT

Press and hold while pressing another key to enter a blue character. For example, press ALT and W to enter a # character.

V.I.A. SHORTCUT BUTTONS

Control VIZIO Internet Apps

INSTALLING THE BASE

1 2 x 4

Size: M4 x 10mm

Place the TV screen-down on a clean, flat surface. To prevent scratches or damage to the screen, place the TV on a soft surface, such as carpet, rug, or blanket.

Attach the neck to the TV with the 4 smaller screws.

Size: M6 x 10mm

Attach the neck to the base with the 4 larger screws.

Place the TV upright on a flat, stable surface.

Wall mount your new HDTV using the VIZIO XMF1000 Quick Install Slim HDTV Mount.* It utilizes a modern, smart design to support 32” to 55” TVs up to 100 pounds. Installation is fast, easy, and secure, thanks to a simple crossbar and hook combination. And because the XMF1000 is only 1” thin, your TV will be the center of attention, not your mount.

This Product Sold Separately

INPU

T

EXIT

CC

BAC

K

OK

MEN

U

INFO

VOL

VOL

7

3D

Y

AAA BA

1

TTER

Y

TTER

0

4

1

AAA BA

5

2

9

6

3

CH

CH

GUID

E

VOL

VOL

1

4

7

3D

Y

AAA BA

TTER

TTER

Y

0

8

AAA BA

5

2

9

6

3

BAC

K

EXIT

CC

INPU

T

CH

CH

OK

GUID

E

MEN

U

INFO

2

Remove the battery cover by pressing gently on the cover and sliding away from the remote.

Match the +/- symbols and insert the included batteries.

Gently slide the battery cover back into place.

Connect the power cord to the back of the TV.

Plug the power cord into an electrical outlet.

3

Back of TV

4

Ethernet

Cable

Coaxial

Cable

If you have an external antenna or a cable connection that extends from a wall outlet, connect it to the TV with an RF/Coaxial cable.

If you have a high-speed internet connection, connect an Ethernet cable from your modem or router to the back of the TV as shown.

Turn the TV on by pressing the Power button on the remote.

The Setup App is displayed.

Use the Arrow buttons on the remote to highlight

Home Mode Setup and press OK.

5 6

Use the OK and Arrow Up/Down buttons on the remote to read and accept the Terms of Service and Privacy Policy for Yahoo! TV Widgets.

When you are finished, highlight Next and press

OK.

Select the name of your wireless network from the list of available networks and press OK.

Enter your network key using the on-screen keyboard, then highlight Connect and press OK.

7 8

Enter your First Name, Last Name, Phone

Number, ZIP Code, and E-mail Address using the on-screen keyboard.

Highlight Next and press OK.

Answer the on-screen questions about your TV connection using the Arrow and OK buttons on the remote.

Highlight Exit to Live TV and press OK.

The First-Time Setup is complete.

CONNECTING YOUR DEVICES

BACK OF TV

Match colored connectors to colored ports.

Choose ONE connection type for each device.

(Cables are not included.)

HDMI CABLE

BEST

• DIGITAL

• HD VIDEO

(1080p)*

• HD AUDIO

COMPONENT CABLE • ANALOG

BETTER

• HD VIDEO

(1080i)*

• STEREO AUDIO

Match colored connectors to colored ports.

AV CABLE

GOOD

• ANALOG

• VIDEO

(480i)*

• STEREO AUDIO

* Maximum Resolution

Commonly-connected devices:

Cable or Satellite Boxes

Blu-ray

™

or DVD Players

Game Consoles

INPUT

CC

EXIT

INFO

MENU

OK

BACK

GUIDE

VOL

VOL

7

3D

1

4

2

5

8

0

3

6

9

CH

CH

GETTING STARTED WITH VIZIO INTERNET APPS

1 2

INPUT

CC

EXIT

INFO

MENU

OK

BACK

GUIDE

VOL

VOL

7

3D

1

4

2

5

8

0

3

6

9

CH

CH

V.I.A.

Press this button to open the V.I.A. Dock.

Highlighted App

Be sure your TV is connected to the Internet.

Use an Ethernet cable or connect wirelessly.

For the best V.I.A. experience, a high-speed

Internet connection is recommended.

The V.I.A Dock is displayed on the bottom of the screen.

Use the Arrow buttons on the remote to highlight an app, then press OK to open it.

3

Your V.I.A Dock has many popular apps pre-loaded, but you can add more at any time.

To discover and add new apps to the Dock, open the Connected TV Store app.

Highlight Categories and press

OK.

A list of app categories is displayed. Select a category and browse through the available apps.

When you’ve found an app you want to add to the Dock, highlight

Add Widget to My Profile and press OK.

HOW TO VIEW 3D

1 2

You will need:

• 3D Blu-ray™ player*

• Blu-ray 3D™ disc*

• VIZIO Theater 3D Glasses

• 3D-ready HDMI cable connecting the 3D Blu-ray

player to your 3D HDTV*

*Sold Separately

For the best 3D experience:

• Try to view the TV straight-on, as shown above. Do not view the TV at an extreme angle, as some of the 3D effect will be lost.

• Sit at least 8 feet from the TV.

HELP TOPICS

How do I return to the

Setup App?

• The on-screen menu has guided setup. Press MENU, then select HELP > Guided Setup.

Select the type of setup you need and press OK. The Setup App will begin.

• To reset the TV to factory defaults, press MENU > HELP > Reset TV Settings. Select Yes.

Remember that all of your settings will be lost!

There is a picture, but there is no sound.

• Press the VOLUME UP button on the remote or on the side of the TV.

• Press the MUTE button on the remote to ensure that mute is off.

• Press MENU, then select TV Settings > Audio. Be sure TV Speakers is set to ON.

The TV displays

“No Signal.”

• Be sure your connected devices are turned on.

• Press the INPUT button on the remote and select the input to which your device is connected (HDMI-1, Composite, Component, etc).

There are black/ gray bars on the top/ bottom/sides of the screen.

• Note that some television channels add black bars to the picture.

• Set the TV to Wide or Zoom mode. Press MENU, then select Wide. Highlight Wide or

Zoom and press OK.

• Adjust the video settings of your external device

There is no power.

• Be sure the power cord is securely connected to the AC socket on the TV and to a working electrical outlet.

• Press the POWER button on the remote or on the side of the TV.

• If the above steps do not work, try plugging the power cord into a different outlet.

COMPLETE THE 3D EXPERIENCE

VIZIO 3D Blu-ray

™

Player with Internet Apps

Whether you’re looking to bring home an intense 3D movie experience, 1080p Full HD, or dive into online entertainment, this player delivers.

VIZIO High Speed HDMI Cables

To view 3D or 1080p Full HD content from your 3D Blu-ray player, you’ll need to connect it with an HDMI cable. VIZIO

HDMI cables feature a slim design for easy installation.

VIZIO Theater 3D Glasses

No matter how many guests you’re entertaining, you can share your new 3D world with friends and family. These 3D glasses are lightweight, comfortable, and battery-free.

These Products Sold Separately

UPGRADE TO POWERFUL DIGITAL AUDIO

The VIZIO Home Theater Sound Bar with Wireless Subwoofer delivers exceptional audio performance in a new sleeker, slimmer design - a perfect complement for a 40” HDTV and larger. This powerful sound system is also remarkably versatile. Its wireless subwoofer fits nearly anywhere in your home theater up to 60 ft. away, and the sound bar offers either a table-stand or wall-mount option.

Available at www.VIZIO.com

This Product Sold Separately

LEGAL / COMPLIANCE

FCC Class B Radio Interference Statement

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Notice

The changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Shielded interface cables and AC power cord, if any, must be used in order to comply with the emission limits.

The manufacturer is not responsible for any radio or TV interference caused by unauthorized modification to this equipment. It is the responsibilities of the user to correct such interference.

FCC warning

Changes or modifications not expressly approved by the party responsible for compliance with the FCC Rules could void the user’s authority to operate this equipment.

Caution

Always use an AC/DC power adapter that is properly grounded. Use the AC cords listed below for each area.

USA: UL

Canada: CSA

Germany: VDE

UK: BASE/BS

Japan: Electric Appliance Control Act

LIMITED WARRANTY

ON PARTS AND LABOR

Covers units purchased as new in United States and Puerto Rico Only.

VIZIO provides a warranty to the original purchaser of a new Product against defects in materials and workmanship for a period of one (1) year of non-commercial usage and ninety

(90) days of commercial use. If a Product covered by this warranty is determined to be defective within the warranty period, VIZIO will either repair or replace the Product at its sole option and discretion.

To obtain warranty service, contact VIZIO Technical Support via e-mail: TechSupport@VIZIO.

com or via phone at 877 MY VIZIO (877.698.4946) from 6:00AM to 9:00PM Monday through

Friday and 8:00AM to 4:00PM Saturday and Sunday, Pacific Time, or visit www.VIZIO.com.

PRE-AUTHORIZATION MUST BE OBTAINED BEFORE SENDING ANY PRODUCT TO A VIZIO

SERVICE CENTER. Proof of purchase in the form of a purchase receipt or copy thereof is required to show that a Product is within the warranty period.

Parts and Labor

There will be no charge for parts or labor during the warranty period. Replacement parts and

Products may be new or recertified at VIZIO’s option and sole discretion. Replacement parts and Products are warranted for the remaining portion of the original warranty or for ninety

(90) days from warranty service or replacement, whichever is greater.

Type of Service

Defective Products must be sent to a VIZIO service center to obtain warranty service.

VIZIO is not responsible for transportation costs to the service center, but VIZIO will cover return shipping to the customer. PRE-AUTHORIZATION IS REQUIRED BEFORE SENDING ANY

PRODUCT TO A VIZIO SERVICE CENTER FOR WARRANTY SERVICE.

Product returns to VIZIO’s service centers must utilize either the original carton box and shipping material or packaging that affords an equal degree of protection. VIZIO Technical

Support will provide instructions for packing and shipping the covered Product to the VIZIO service center.

Limitations and Exclusions

VIZIO’s one-year limited warranty only covers defects in materials and workmanship. This warranty does not cover, for example: cosmetic damage, normal wear and tear, improper operation, improper voltage supply or power surges, signal issues, damages from shipping, acts of God, any type of customer misuse, modifications or adjustments, as well as installation and set-up issues or any repairs attempted by anyone other than by a VIZIO authorized service center. Products with unreadable or removed serial numbers, or requiring routine maintenance are not covered. This one year limited warranty does not cover Products sold “AS IS”, “FACTORY RECERTIFIED”, or by a non-authorized reseller.

THERE ARE NO EXPRESS WARRANTIES OTHER THAN THOSE LISTED OR DESCRIBED

ABOVE. ANY IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANT-

ABILITY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED IN DURATION

TO THE PERIOD OF TIME SET FORTH ABOVE. VIZIO’S TOTAL LIABILITY FOR ANY AND ALL

LOSSES AND DAMAGES RESULTING FROM ANY CAUSE WHATSOEVER INCLUDING VIZIO’S

NEGLIGENCE, ALLEGED DAMAGE, OR DEFECTIVE GOODS, WHETHER SUCH DEFECTS ARE

DISCOVERABLE OR LATENT, SHALL IN NO EVENT EXCEED THE PURCHASE PRICE OF THE

PRODUCT. VIZIO SHALL NOT BE RESPONSIBLE FOR LOSS OF USE, LOSS OF INFORMATION

OR DATA, COMMERCIAL LOSS, LOST REVENUE OR LOST PROFITS, OR OTHER INCIDENTAL

OR CONSEQUENTIAL DAMAGES. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG

AN IMPLIED WARRANTY LASTS OR THE EXCLUSION OF INCIDENTAL OR CONSEQUENTIAL

DAMAGES, SO THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU. THIS

WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS,

WHICH VARY FROM STATE TO STATE. THIS WARRANTY IS SUBJECT TO CHANGE WITHOUT

NOTICE.

CHECK WWW.VIZIO.COM FOR THE MOST CURRENT VERSION.

Personal Data

If your VIZIO product is capable of storing personal data and other information, ALL

CONTENTS AND INFORMATION WILL BE DELETED IN THE COURSE OF SOME IN-HOME

AND ALL SHIP-IN WARANTY SERVICE. If this occurs, your product will be restored to you configured as originally purchased. You will be responsible for restoring all applicable data and passwords. Recovery and reinstallation of user data is not covered under this Limited

Warranty. In order to protect your personal information, VIZIO recommends that you always clear all personal information from the unit before it is serviced, regardless of the servicer.

Zero Bright Pixel Defect Guarantee

This policy covers “zero bright pixel” defects for the duration of the limited “ONE YEAR

WARRANTY” on select new product purchases. To determine if this guarantee applies to your product, refer to the “DETAILS” tab of the model’s product information page (www.VIZIO.

com) or look for the “zero bright pixel” guarantee on the box.

© 2012 VIZIO INC. ALL RIGHTS RESERVED.

120703OC-NC