advertisement
INOVA M MOTORIZED TREADMILL USER MANUAL
0
CONTENTS
PLEASE READ ALL INSTRUCTION IN THE OWNER'S MANUAL CAREFULLY
BEFORE ASSEMBLY AND USE THE TREADMILL.
AND KEEP IT FOR FUTURE REFERENCE.
CONTENT----------------------------------------------------------------------------------------------------------------------1
I M P O R T A N T S A F E T Y P R E C A U T I O N S - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2
A S S E M B L Y I N S T R U C T I O N S - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3 - 5
F O L D I N G & U N F O L D I N G I N S T R U C T I O N S - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 6
I N C L I N E I N S T R U C T I O N S - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 7
G R O U N D I N G M E T H O D S - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 8
O P E R A T I O N G U I D E - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 9 - 1 2
G E T T I N G S T A R T E D G U I D E - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1 3
S A F E T Y E X E R C I S E - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1 4
W A R M - U P E X E R C I S E - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1 5
M A I N T E N A N C E I N S T R U C T I O N S - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1 6
B E L T A D J U S T M E N T - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1 7
E X P L O D E D D R A W I N G - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1 8
P A R T S L I S T - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1 9 - 2 0
E R R O R C O D E A N D S I G N I F I C A N C E - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2 1
1
IMPORTANT SAFETY PRECAUTIONS
WARNING
Before starting any exercise program, consult with your physician or health professional , the person who is above 35 years old people or has some health problems before. We take no responsibility for any troubles or hurts due to above reasons. Don't power on until you finish assembly the treadmill and covering the protected top of motor.
ATTENTIONS
01. Do not plug anything into any parts of this equipment, or it may damage.
02.When using this treadmill, keep attaching the safety pull pin rope to your clothes or belt. If the treadmill should suddenly increase in speed due to an electronics failure or the speed inadvertently increased, the treadmill will come to a sudden stop when the pull pin is disengaged from the console.
03.If you use the treadmill for the first time, you must hold the handrail until you feel comfortable on the running belt.
04. Never start the treadmill while you are standing on the walking belt, and always stand on the foot rails on the sides of the frame until the belt is moving.
05. Do not wear long, loose fitting clothing that could become caught in the treadmill. Always wear running or aerobic shoes with rubber soles.
06. The treadmill is only used for adults, child use the treadmill must have adult on side.
07. Keep small children or pet away from the treadmill during operation.
08. Position the treadmill on a clear, level surface. Do not place the treadmill on thick carpet as it may interfere with proper ventilation.
09.When the treadmill is not being used, the power cord should be unplugged and the safety pull pin removed. Note the power cord of motorized treadmill made by special equipment, and if it is broken, please contact distributor quickly. The power cord of motorized treadmill is specialized. If the power cord is damaged, please purchase it from distributor or contact our company directly.
10. Do not do exercise in 40 minutes after meal.
2
1
ASSEMBLY INSTRUCTIONS
WHEN YOU OPEN THE CARTON, YOU WILL FIND THE BELOW SPARE PARTS.
3L/R 17 41
52
70
67
73
68
74
69
75
76 77 79 80
81
NO.
1
3L/R
17
41
52
67
68
DESCRIPTION
MAIN FRAME
UPRIGHT
COMPUTER
SAFETY KEY
BOLT
WASHER
ALLEN WRENCH
SPARE PARTS LIST
REMARK QTY
1
2
1
NO.
73
74
75
M8*15
∮
14.5*
∮
8.4
*t0.8
S5
1
14
76
77
14 79 MASSAGER FRAME
1 80
DESCRIPTION
MP3 WIRE
FRONT COVER
FRONT COVER
PLUG
BOLT
SIT-UP FOAMS
MASSAGER
3
REMARK
M4*15 4
4
1
1
QTY
1
2
2
69
70
SCREW DRIVER 1 81 TWISTER
ALLEN WRENCH S6 1
FIXING TOOLS
5# ALLEN WRENCH 1 pc 、 6# ALLEN WRENCH 1 pc 、 SCREW DRIVER 1 pc
ASSEMBLY STEPS
STEP 1 :
Take out the UPRIGHT ( 3L/R) & COMPUTER (17); As the picture shown, connect
COMPUTER UP/MIDDLE/BOTTOM WIRE (36,37,38) well with COMPUTER (3), and fix them up step by step;
4
1
STEP 2 : Fix the MASSAGER FRAME (79) & MASSAGER (80) to the MAIN FRAME (2);
STEP 3 : Put on the SAFETY KEY (41) & MP3 WIRE ( 73).
ATTENTION
Must confirm complete assembly as the required above and lock all bolts.
Do the following operations after checking everything is ok.
Before you use the treadmill, please read the instructions carefully.
5
FOLDING INSTRUCTIONS
Lift up the machine and force to pull up until you heard "click" that made by safety casing stuck the pneumatic cylinder.
UNFOLDING INSTRUCTIONS
Use foot to kick the safety sleeve lightly and pull down the machine at the same time as the arrow direction. Then the machine will fall down smoothly.
6
INCLINE INSTRUCTIONS
Adjust the incline by moving the pin , There are three levels.
7
GROUNDING METHODS
This product must be grounded. If it should malfunction or breakdown, grounding provides a path of least resistance for electric current to reduce the risk of electric shock.
This product is equipped with a cord having an equipment-grounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.
DANGER – Improper connection of the equipment-grounding conductor can result in a risk of electric shock. Check with a qualified electrician or serviceman if you are in doubt as to whether the product is properly grounded. Do not modify the plug provided with the product – if it will not fit the outlet, have a proper outlet installed by a qualified electrician.
This product is for use on a nominal 230 volt circuit and has a grounding plug that looks like the plug illustrated in sketch A in following figure. Make that the product is connected to an outlet having the same configuration as the plug. No adapter should be used with this product.
8
LCD WINDOW FUNCTION
OPERATION GUIDE
1. "SPEED" WINDOW:
1.1 Display running speed ;
1.2 Display program number ;
1.3 Display 3 seconds countdown when the treadmill is starting ;
1.4 Display the "FAT" characters when in the mode of calorie ;
2. "TIME" WINDOW:
Display running time.
3. "DIST." WINDOW:
3.1 Display running distance ;
3.2 Display category: "-1-" --- "-5-" when in the mode of calorie ;
4. "CAL." WINDOW:
4.1 Display heat and program movement level value ;
4.2 Display parameters in the mode of bodyfat testing: "sex" 、 、 、 、
"body fat" ;
5. "PULSE" WINDOW:
Display heartbeat value.
9
BUTTON FUNCTION
1. "PROGRAM" BUTTON:
Program select key. Choose order: manual mode -- P1 – P9 -- FAT cycle.
2. "MODE" BUTTON:
2.1 It is countdown select key when in standby condition. Choose order: manual mode - time countdown - distance countdown - heat countdown cycle ;
2.2 It is calorie parameters select key when in the mode of calorie. Choose order: "sex" 、
"age" 、 "height" 、 "weight".
3. "START" BUTTON:
Press this button to start.
4. "STOP" BUTTON:
Press this button to stop.
5. "SPEED + -" BUTTON:
Adjust speed when treadmill start. Press the button more than 2 seconds, and it will be up or down continuously.
6. “SPEED SHORTCUT” BUTTON :
3 , 6 , 9 adjust the speed when treadmill running.
7 . BUTTONS ON THE LEFT HANDLEBAR:
Start and stop key.
8. BUTTONS ON THE RIGHT HANDLEBAR:
Speed adjust key.
10
MAIN FUNCTION
Turn on the power, all window lighten 2 seconds, then enter standby condition.
1. QUICK START (MANUAL MODE)
Put on safety lock and press the start button. After 3 seconds, the treadmill will start at the lowest speed. Click "SPEED + -", "3 6 9" or buttons on right handlebar to adjust speed. Press the "STOP" button or take away the safety lock to stop.
2. COUNTDOWN MODE
Press the "MODE" button, choose :time countdown 、 distance countdown 、 heat countdown.
Windows display a default value and shine. Click "SPEED + -" button to adjust to the necessary values. Press START button. After 3 seconds, the treadmill will start with the lowest speed. Click
"SPEED + -", "3 6 9" or buttons on right handlebar to adjust speed. When countdown to 0,the treadmill will stop slowly.
3. BUILD-IN PROGRAM
Press program button to choose any one in P1---P9 and the time window shows default and flickers. press speed button to adjust the time you need. Built-in program totally has 20 sections and running time of every section is set time/20. Press start button, the treadmill will start running after 3 seconds countdown. After one section exercise finish, it will go into next section automatically and the speed will change to the speed of corresponding section. And you can adjust the speed with “SPEED +,-“ when running. After all sections finish, the program will stop and the treadmill slow down and stop. And you can also press stop button or take away safety lock to stop the machine.
PULSE FUNCTION
When the treadmill is running, hold the handle pulse about 5 seconds, it will display pulse data. It has heart-shaped graphics when testing pulse. This data is only for reference and can not be as medical data.
BODY TESTER ( FAT )
In the standby condition , press PROGRAM button continuously to enter “ FAT ” body fat test.
When window displays “ FAT” ,Press MODE and choose order ("-1-" SEX, "-2-" AGE, "-3-" HEIGHT, "-4-"
WEIGHT). Press SPEED+ , SPEED to set. When all parameters are selected, press MODE button again.The window will display "-5-" and "---". Then grasp the hand pulse, the window will display your body fat index.
11
Parameters category
SEX ( -1)
AGE ( -2)
HEIGHT ( -3)
WEIGHT ( -4)
PARAMETER DISPLAY AND SETTING RANGE
0
Default
( man
25
70KG
)
170 CM
Range
0—1
10—99
100—240 CM
20—160KG
Remark
0=man 1=woman
BODY FAT INDEX COMPARING
Body fat index ( BMI )
<19
19--26
26--30
>30
Obesity
Thin normal
Over weight
Obesity
SLEEP FUNCTION
When treadmill stops and no actions for more than 10 minutes, the system will shut down the display and go into sleep status. Press any key to wake it up.
SAFETY LOCK FUNCTION
The window shows"---" when take away the safety lock and the treadmill will stop quickly with "didi" alarm noise. And put the safety lock on, set program default.
RUNNING PARAMETER DISPLAY AND SETTING RANGE
SPEED
TIME
DISTANCE
CALORIES
Display range
0.8—12.0 KMH
0:00—99:59
0.00—99.9 KM
0—999 Kcl
Default of
Mode
--------
30:00
1.00KM
50Kcl
Default of
Program
--------
30:00
--------
--------
Range
--------
5:00---99:00
0.5—99.5 KM
10—995 Kcl
12
PROGRAM EXERCISE CHAT
GETTING STARTED GUIDE
P3
P4
P5
P6
P7
TIME INTERVAL
MODE
P1
P2
1 2 3 4 5 6
SET TIME / 20 = EVERY GRADE TIME
7 8 9 1
0
1
1
1
2
1
3
1
4
1
5
1
6
1
7
1
8
1
9
SPEED 2 3 3 4 5 3 4 5 5 3 4 5 4 4 4 2 3 3 5 3
SPEED 2 4 4 5 6 4 6 6 6 4 5 6 4 4 4 2 2 5 4 2
2
0
SPEED
SPEED
2
2
4
3
4
3
6
3
6
4
4
5
7
3
7
4
7
5
4
3
7
4
7
5
4
3
4
3
4
3
2
6
4
6
5
5
3
3
2
SPEED 3 5 5 6 7 7 5 7 7 8 8 5 9 5 5 6 6 4 4 3
SPEED 2 4 4 5 6 7 7 5 6 7 8 8 5 4 3 3 6 5 4 2
SPEED 2 4 4 4 5 6 8 8 6 7 8 8 6 4 4 2 5 4 3 2
3
P8
P9
SPEED 2 3 3 6 7 7 4 6 7 4 6 7 4 4 4 2 3 4 4 2
SPEED 2 4 4 7 7 4 7 8 4 8 9 9 4 4 4 5 6 3 3 2
PREPARE
If you are around 35 years old, or have health problem, even this is your first time to do fitness exercise, please consult doctor or professional before use it.
Before do exercise, please stand on the side to learn how to operate, such as start, stop and speed adjustment. After that stand on the plastic deck of the treadmill board, catch hold of the handrail, start by 1.6--3.2 km/h low speed, stand straight, look forward, one foot try to do few times, then stand on the belt to do exercise. After adapting, you can adjust the speed to 3--5 km/h and keep doing about 10 minutes, then stop.
13
EXERCISE
Please stand on the side to learn how to operate, such as speed and incline, until you know it then can start do exercise. Walk 1 km by constant step need about 15-25 minutes, please record it in fact. And walk 1km by 4.8 km/h need about 12 minutes. If you can do it easily by few times, then can adjust the high speed and incline, and go on to do 30 minutes, you can take a good exercise. Before do slow walk exercise , please remember it is for your health and can not irritable.
AMOUNT OF EXERCISE
SHORTCUT ——The best way to save time is do 15-20 minutes exercise.
Warm up 2 minutes by 4.8 km/h, and adjust the speed to 5.3 km/h and 5.8 km/h, continue do exercise by this two speeds. Then add 0.3 km/h per 2mins speed increase, until you feel breathing quickened but not breathe hard. Keep this speed to do exercise, if feels uncomfortable, please reduce 0.3 km/h. Leave 4 minutes to reduce speed at last. If you fell it is hard to strengthen exercises by increase speed, then you can choose the way of increase incline slowly, it also can strengthen exercise.
CONSUMPTION OF HEAT ——This way can really consumption the heat.
Warm up 5 minutes by 4--4.8 km/h speed, then add 0.3 km/h per 2 minutes increasing speed, you can do 45mins on the speed that you feel it is comfortable and challenge. In order to strengthen do exercise. You can do 1 hour by this speed and add 0.3 km/h speed when you heard some business advertisements, and return the speed back when go to next program, so at this period, the heat will be consumed enough. At last keep 4 minutes to reduce the speed.
EXERCISE FREQUENCY
Target is 3--5 times per week, do 15-60mins each time. It is better to make a time schedule, do not accord to your favor. You can get the strenuous exercise degree through adjusting speed and incline. We'd suggest that do not set incline when start do exercise.
14
SAFETY EXERCISE
Please consult professional staff before do exercise. He can help recommendation exercise rate/intension and time according to your age and health condition. When running, if you feel chest tightness or chest pain, irregular Heartbeats, short of breath, dizziness or other unwell, please stop immediately! And consult professional before you want continually to do exercise. If you often use treadmill, you can choose normal walk speed or jog speed.
If you have no experience or can't make sure the best testing speed, you can reference below standard:
Speed 1-3.0 km weak constitution people.
Speed 3.0-4.5 km sedentary or not often exercise people.
Speed 4.5-6.0 km walking quickly people.
Speed 6.0-7.5 km fast walk people.
Speed 7.5-9.0 km jogger.
Speed 9.0-12.0 km intermediate speed runner.
More than 12.0 km excellent runner.
ATTENTION : It is suitable for walker to choose less than or equal to 6 km speed.
It is suitable for runner to choose more than or equal to 8.0 km speed.
15
维护指南
WARM-UP EXERCISE
It is better to do some warm-up exercise. Warm the muscle easy stretch, so use 5-10 minutes to warm-up.
Then stop and according below method to do stretch exercise for five times, and each foot do 10 seconds or more every time. After running, do those stretch exercises one more time.
1. Reach Down Knees slightly bent and body s lowly bent forward, back and shoulders relax, trying to touch toes. Keep 10-15 seconds, and relax. Repeat 3 times ( See picture l ).
2. Hamstrings Stretches Sitting on a clean cushion, put one leg straight, the other inward and close to the inside of the straight leg. Try to touch your toes by hand. Keeping 10-15 seconds, and relax. Repeat 3 times for each leg ( See picture 2 ).
3. Crus and Feet Tendon Stretches Standing with two hands on the wall, one leg behind. Keeping your legs straight and the heel on the ground, tilt to the wall or tree. Keep 10-15 seconds, and relax. Repeat
3 times for each leg ( See picture 3 ).
4. Quadriceps Stretches Keeping your balance with your left hand holding on the wall or table, then stretch your right heel toward your buttocks slowly, until you feel very tense in the front of your thigh.
Keep10-15 seconds, and relax. Repeat 3 times for each leg ( See picture 4 ).
5. Sartorius (Inner Muscles of the Thigh) Muscle
Stretches Sitting down with your soles opposite and knees outward. Pull feet toward groin Keep 10-15 seconds, and relax. Repeat 3 times ( See picture 5 ).
16
MAINTENANCE INSTRUCTION
WARNING Please make sure pull out the treadmill's power plug before cleaning or maintaining the product.
CLEANSING General cleaning or the unit will greatly prolong the treadmill's life. Keep treadmill clean by dusting regularly. Be sure to clean the exposed part of the deck on either side of the walking belt and also the side rails. This reduces the build up of foreign material underneath the walking belt. Make sure the shoes are clean. The top of the belt may be cleaned with a wet soapy cloth. Be careful to keep liquid away from inside the motorized treadmill frame or from underneath the belt.
WARNING Always unplug the treadmill from the electrical outlet before removing the motor cover. At least once a year remove the motor cover and vacuum under the motor cover.
This treadmill's walking belt and deck are equipped with a pre-lubricated, low maintenance deck system. The belt/ deck friction may play a major role in the function and life of your treadmill, thus requiring periodic lubrication. We recommend a periodic inspection of the deck. We recommend lubrication of the deck according to the following timetable:
Light user (less than 3 hours/ week) once three weeks
Medium user (3-5 hours/ week) once two weeks
Heavy user (more than 5 hours/ week) every week
We suggest you buy lubricating oil from local distributors or contact our company directly.
Pay attention, any other maintains please ask professionals for help.
17
BELT ADJUSTMENT
Place treadmill on a level surface. Make treadmill run at approximately 6-8 km/h, observe the running belt deviate condition.
If the belt has drifted to the right, unplug the safety lock and power switch, and turn the right adjusting bolt 1/4 turn clockwise, then insert the power switch and safety lock, make the treadmill running, observe the running belt deviate condition. Repeat above steps until the running belt be placed in the middle.
See picture A
Once the treadmill belt swerving to the left, unplug the safety lock, turn off the power, then with the left adjusting bolt clockwise rotation 1 / 4 laps, and turn on the safety lock and power to make treadmill running, checking the deviation of the treadmill belt.
Repeat the above steps until the belt centered. See picture B
The treadmill belt will gradually relax after above steps or after a period of time using, unplug the safety lock, and turn off the power, with the two adjusting bolt clockwise rotation
1 / 4 laps, and turn on the safety lock and power to make treadmill running, then standing on the belt to confirm the tightness.
Repeat the above steps until the belt moderate tightness. See picture C
18
EXPLODED DRAWING
19
PARTS LIST
NO.
1
2
3
4
5
6
7
8
9
DESCRIPTION
MAIN FRAME
BASE FRAME
UPRIGHT (L&R)
HANDRAIL BAR
MOTOR BRACKET
FRONT ROLLER
REMARK QTY
1
1
1
1
2
1
REAR ROLLER
DECAL
PIN
1
1
2
10
11
12
13
HAND PULSE
RUNNING BOARD
RUNNING BELT
BELT
21
22
18
19
20
14 DC MOTOR
15
MOTOR BOTTOM
COVER
16 MOTOR TOP COVER
17 COMPUTER COVER
BOWL GASKET
END CAP
SIDE RAIL
MOVING WHEEL
ADJUST PAD
2
2
2
1
1
6
2
2
1
1
1
1
1
NO. DESCRIPTION REMARK QTY
23
24
25
26
27
28
MOVING WHEEL PIPE
PLUG
POWER SWITCH
INNER PIPE PLUG
PLANAR PAD
BLUE CUSHION
ANNULAR
SUBSTANTIAL PLUG
29 HANDRAIL FOAMA
30*60 2
1
2
∮
35*15*(M6*
4
10)
∮
6.2*
∮
30*10 6
∮
12*
∮
18*
∮
2
4*9
2
2
30 CYLINDER F=30kg 1
31 SILICONE OIL 1
32
33
34
35
POWER PLUG
MOTOR CUSHION
POWER PLUG
SINGLE LINE
36 COMPUTER UP WIRE
37
COMPUTER BOTTOM
38
39
WIRE
40 CONTROLLER
41
42
SAFETY LOCK
CABLE TIE
43
44
LITTLE COVER
BOLT M8*70
1
1
1
1
1
1
1
7
1
2
1
7
1
20
NO. DESCRIPTION
45
46
47
48
49
50
51
52
53
54
55
56
60
61
62
63
57
58
59
BOLT
BOLT
BOLT
BOLT
BOLT
BOLT
BOLT
BOLT
LOCKNUT
LOCK NUT
BOLT
BOLT
BOLT
BOLT
BOLT
BOLT
BOLT
BOLT
BOLT
REMARK
M8*60
M8*20
M8*35
QTY
1
2
2
NO. DESCRIPTION REMARK
QT
Y
∮
11*
∮
20*t2.0 2 64 WASHER
65
66 SPRING WASHER
67
WASHER
WASHER
∮ 9* ∮ 16*t1.6 14
∮
8.1*
∮
12.3*t2.
6
1
∮ 14.5* ∮ 8.4*t0.8 14
68 ALLEN WRENCH S5 1
M6*45
M6*60
1
2
M10*30 2 69 SCREW DRIVER
M8*25
M8*15
M8*40
3
14
3
70 ALLEN WRENCH
71 COMPUTER CHIP
72
COMPUTER
BOTTOM COVER
73 MP3 WIRE M8*45 2
M5*10
ST4*25
ST4*25
8
2
6
74 FRONT COVER
75
76
FRONT COVER
PLUG
BOLT
ST4*15
M5*25
35
6
M8
77 SIT-UP FOAMS
78
79
80
81
PIPE PLUG
MASSAGER
FRAME
MASSAGER
TWISTER
21
S6
M4*15
1
4
4
4
1
2
2
1
1
1
1
1
1
Fault Code
E01
E02
E03
E05
ERROR CODE AND SIGNIFICANCE
Fault Description Fault Processing
Communication abnormal: Stop and go into fault. The machine can’t running, the
The control and computer computer shows fault code“E1”, and the buzzle will ringing has abnormal three tone. communication after start Possible reasons : communication obstructed between controller and computer. please check and make sure the wire connect well and without damage.
Explosion-Proof Protection
Stop and go into fault. The machine shows fault code “E02”.
Other areas show blank, and can not restart.
Possible Reason: check the motor wire if connect well, and then connect it again.
Stop and go into fault status, computer shows fault code“E03”. Other areas show blank. After 10 seconds it will
No Speed Wireless Sensor go into ready mode, and can restart.
Network Possible Reasons : Can’t receive the motor speed sensor feedback above 3 seconds, please check sensor plug and motor connect wire and the controller.
Over-Current Protection
Stop and go into fault status, computer shows fault code“E05”.Other areas show blank. After 10 seconds will go into ready mode, and can restart.
Possible Reasons : Over the rated load cause too much electricity that make system Self-preservation or some parts blocked and make DC motor can’t process. Adjust the machine and restart. Another please check the DC motor or controller have any burned smell or not. If yes, please change the motor or controller. Another make sure the power and voltage is comply with standard.
22
E06
E08
Controller self checking
Computer displays "E06" or “E8”
Possible Reasons: The parts of controller are not connected well, please change them immediately.
EEPROM (data memory)
Computer displays “E6” or "E08".
Possible Reasons: The parts of controller are not connected error well, please change them immediately.
23
advertisement
Related manuals
advertisement