Redexim Scarifier S510 Owner's Manual


Add to my manuals
7 Pages

advertisement

Redexim Scarifier S510 Owner's Manual | Manualzz

Operator and Parts manual

RINK scarifier

Model S 510

Serial number:

NOTE:

IN ORDER TO ENSURE THE SAFE USE AND TO ACHIEVE THE BEST

PERFORMANCE, IT IS ESSENTIAL THAT THIS OPERATORS MANUAL

IS CAREFULLY READ BEFORE THE RINK SCARIFIER IS USED.

0948 English 944.120.400

FOREWORD

Congratulations on the purchase of your RINK scarifier. To ensure the safe and lasting operations of this

RINK scarifier you (and anyone using the machine) should read and understand this user’s manual. A complete knowledge of the contents of the manual is necessary in order to ensure the safe use of this machine.

The RINK scarifier is intended exclusively for grass fields or areas on which grass can grow.

On the following page, we will begin with the safety instructions. Every user must be familiar with these instructions and must follow them carefully. Below you will find a registration card, which should be returned to us so that we are able to process any future claims.

In this manual, many instructions are given which are stated in a number sequence. The user must follow the instructions according to this sequence. If the * appears this refers to safety instructions. If the @ is used, this refers to a tip and/ or note.

GUARANTEE CONDITIONS

THIS RINK SCARIFIER IS DELIVERED TO THE CUSTOMER ACCOMMPANIED BY A

GUARANTEE A1GAINST DEFECTS IN THE MATERIALS USED. THIS GUARANTEE

APPLIES FOR A PERIOD OF 12 MONTHS AS OF THE DATE OF PURCHASE.

RINK SCARIFIER’S GUARANTEES ARE SUBJECTED TO THE "GENERAL CONDITIONS

FOR SUPPLY OF PLANT AND MACHINERY FOR EXPORT, NUMBER 188", WHICH ARE

PUBLISHED UNDER THE AUSPICES OF THE UNITED NATIONS ECONOMIC COMMISSION

FOR EUROPE .

REGISTRATION CARD

For your own record, copy the information from the registration card to the table hereunder

Serial number of machine

Name of your distributor

Date of purchase

Any remarks

2

SAFETY INSTRUCTIONS

1.

2.

3.

4.

5.

6.

The RINK Scarifier is suited exclusively to grass fields.

Every RINK Scarifier user must be fully informed of the information contained in the user manual. Never let children or inexperienced people use the RINK Scarifier.

Inspect the ground where the RINK Scarifier is to be applied. Remove all loose obstacles, avoid uneven ground.

Never disconnect the Dead Men’s switch. When the dead men’s lever is released, the engine must shut down.

Ensure that other people are standing at least 4 mtr. (14' ) away from the RINK

Scarifier.

Use appropriate clothing. Wear strong shoes with a steel inforced toe cap, long trousers, tie up long hair. Do not have any loose pieces of clothing.

7.

8.

Never try to force the RINK Scarifier, a situation which is visible in an unstable behavior of the RINK Scarifier.

Check the RINK Scarifier once a week to ensure there are no loose screws or nuts and bolts.

9. The RINK Scarifier may never be used without protection covers and safety stickers.

10. Always switch off the engine, before starting any maintenance, adjustment or repair.

Be aware of sharp knifes underneath that can hurt your . Be aware of hot parts as well, like the exhaust.

11. Use only the original RINK Scarifier spare parts/ knifes in order to ensure the safe operation of the machine.

12. Never use the RINK Scarifier in the dark, in heavy rain, on frozen ground, stormy conditions or on slopes greater than 20 degrees.

13. Before operating the machine, also read the instructions and the maintenance

information of the Engine.

14. Be aware of the risks using gas for the engine. Refilling must be done outside. Do not spill any gas during refilling.

15. Clean the machine after use.

3

Par.

CONTENTS

Description

Foreword

Guarantee conditions

Registration card

1.0

2.0

3.0

4.0

5.0

5.1

5.2

5.3

6.0

Safety instruction

Technical specification

Explanation of the key controls

When to use the RINK Scarifier

How to use the RINK Scarifier

Technical issues

Replacing/ Tensioning the V Belt

Replacing the cutting knifes

Maintenance

Spare parts

1.0

TECHNICAL SPECIFICATIONS

Model S 510

Working width

Working depth

Weight

Slit spacing side-to-side

Shipping dimensions

Engine oil

Lubrication grease

Engine gas

470 mm (18 ½ ”)

Up to 30 mm (1 ½ ”)

48 Kg (105 lbs)

30 mm ( 1 3/16”) standard

15 mm ( 5/8 “) optional

800 x 600 x 600 mm

(32”x 24”x 24”)

SAE 15 W 40

EP 2

Standard unleaded.

6

7

6

6

8

4

5

6

6

Page

2

3

2

2

4

FIG.2. Some key controls

2.0 Explanation of the key controls.

In Fig.2. some important controls are drawn, as follows:

1.

Steering handle. Tighten all bolts/ nuts after unpacking.

2.

Dead Men’s lever. Should be squeezed, otherwise engine will not start or shut down

3.

Dead Men’s switch. May never be disconnected. Should work properly all the time.

4.

Rewind starter

5.

Fill gap for gas.

6.

Air filter. Replace/ clean it in time.

7.

Exhaust. DO NOT touch.

8.

Oil fill opening for engine. Includes oil stick.

9.

Front cover main unit. Should always be adjusted close to the ground.

10.

Depth adjustment spindle.

11.

Lock nut for depth adjustment spindle.

12.

Throttle

13.

Choke.

5

3.0 When using the RINK Scarifier ?

The RINK Scarifier is used on grass field to cut into the turf and removing grass, weeds and moss allowing air to enter the turf. This air will make the grass more healthy. As we can adjust the working depth of the RINK Scarifier, we can easily choose for a light or heavy treatment.

4.0 How to use the RINK Scarifier ?

The following points prescribe how to use the RINK Scarifier:

1.

The RINK Scarifier is delivered without any oil and gas. Fill the oil through the oil fill gap till the indicator’s level. We recommend SAE 15 W 40. Use the regular unleaded gas for the engine.

2.

After the job is done, during transport and before starting the engine, the machine has to be raised with the depth adjustment spindle, till the blades are about 15 mm (3/4”) of the ground.

NOTE: THE BLADES ARE DIRECTLY CONNECTED TO THE ENGINE. WHEN THE

MOTOR RUNS, THE BLADES ROTATE AS WELL; DO NOT RAISE THE RINK

SCARIFIER FROM THE GROUND AND DO NOT PUT ANY LIMBS CLOSE TO THE

BLADES.

3.

Start the engine using the rewind starter. Set the throttle at full speed and use the choke, if necessary. NOTE. THE DEAD MEN’S LEVER SHOULD BE SQUEEZED, OTHERWISE

THE ENGINE WILL NOT RUN.

4.

When the engine runs, reduce the throttle till half way. Let the engine runs for 1 minute at this speed, so it can warm up.

5.

If the engine doesn’t run, check the engine’s manual.

6.

When the RINK Scarifier is on the site, adjust the working depth ( ENGINE SHOULD BE

OFF), start the engine, set the throttle at the correct speed and do the job.

5.0 Technical issues.

5.1 Tensioning/ replacing the V Belt:

1.

Remove the V belt cover

2.

Check the condition of the V belt. If worn or in bad shape, replace the V Belt.

3.

Slacken the 4 bolts with which the engine is fitted to the main chassis.

4.

Slide the engine towards the steering lever to tighten the V belt.

5.

Tighten the 4 bolts again. NOTE. DO NOT OVERTIGHTEN THE V BELT TENSION.

SERIOUS DAMAGE MAY APPEAR.

6.

Mount the V-belt cover.

5.2 Replacing the cutting knifes:

1.

Remove the V belt cover.

2.

Slacken the 4 bolts with which the engine is fitted to the chassis.

3.

Remove the V belt.

4.

Remove the 2 x 2 bolts that mounts the bearings of the main knife shaft to the chassis. The whole knife shaft will come out. NOTE. THE KNIFES CAN BE VERY SHARP. BE VERY CAREFUL.

5.

Remove the bearing at the opposite end of the V belt pulley.

6.

Remove the nut that tighten all blades on the shaft.

7.

All knifes with distance bushes can be taken off.

8.

Replace blades.

9.

Start assembling the whole shaft again, the same way as taken apart. NOTE: SOME BLADES

ARE ROTATIONAL SENSITIVE. CHECK THE CORRECT POSITION. Looking at the shaft end at which the blades have been taken away, the shaft runs clock wise.

10.

Check whether all bolts nuts are tight after re assembly and no parts have been forgotten.

6

5.3 Maintenance:

1.

The engine oil should be exchanged at a minimum of once a year. Check the engine manual for more information

2.

The machine needs greasing every 100 hours of use, or once a year.

3.

When the RINK Scarifier isn’t used for a longer period, the following should be done: a.

Clean the machine. b.

Empty the gas tank c.

Clean the knifes. d.

Put some oil on the knifes to prevent them from rusting. e.

Store the machine on a safe dry place.

7

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

advertisement