EAW CAZ800 Specifications
Add to My manuals4 Pages
EAW CAZ800 stereo power amplifier delivers exceptional performance and versatile features for demanding audio applications. With 800 watts of continuous power at 4 ohms bridged, it's ideal for powering speakers in paging systems, hotels, schools, houses of worship, and more.
advertisement
CAZ 800
STEREO POWER AMPLIFIER
DESCRIPTION
The CAZ800 is designed for continuous duty in speech, music, paging, and sound reinforcement applications demanding high performance, flexible features, and rugged dependability.
The CAZ800 is rated at a continuous output of 205 watts per channel into 8 ohms, 300 watts per channel into 4 ohms, and 480 watts per channel into 2 ohms. In bridge mode, the CAZ800 is rated at 560 watts into 8 ohms and 800 watts into 4 ohms.
A switchable low-cut filter eliminates low-frequency energy below
30 Hz for tighter bass response, and a switchable limiter protects loudspeakers from spurious transients and hard clipping.
Inputs are balanced/unbalanced 1/4" TRS and XLR line input jacks for each channel, as well as screw terminal connections for the two discrete, actively balanced inputs.
Speaker connections are made with screw-terminals for Channel A,
Channel B, and Bridged Mono. Front panel detented gain controls provide independent level-setting for each channel. Signal present and overload LEDs, located above each gain control, provide visual feedback for monitoring the output signal level.
The CAZ800 has one variable speed fan in the back to keep it cool no matter how hard it is driven. As the power output increases, the fan speed increases to move more cool air through the chassis and away from the internal heatsink and power transistors, increasing the life span of the amplifier.
Five year warranty.
CAZ800 Dimensions
17.0 in/432 mm
CAZ800-AMPLIFIER
ON
OFF
POWER
B (+)
B (--)
GND
A (--)
A (+)
PUSH
INPUT
B
LINE
PUSH
OFF ON
SUBSONIC
FILTER AT 30Hz
INPUT
A
OFF ON
CLIP LIMIT
LINE
AMP MODE
MONO
STEREO
BRIDGE
OL SIG OL SIG
CAZ800-AMPLIFIER
CHANNEL B BRIDGED CHANNEL A
B (+) B (-) (+) (-) A (+) A (-)
dB 30
A
dB 30
B
CAUTION
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
DO NOT EXPOSE THIS APPARATUS TO RAIN OR
MOISTURE. SEE INSTRUCTIONS BEFORE USING.
MANUFACTURED IN CHINA
2004 LOUD TECHNOLOGIES INC.
"EAW" IS A REGISTERED TRADEMARK
OF LOUD TECHNOLOGIES INC.
Features
• 800 watts continuous at 4 ohms bridged
• Ultra low-noise/low-distortion design
• Switchable low-cut filter @ 30 Hz on both channels
• Switchable limiter on both channels
• Balanced/unbalanced 1/4" TRS and XLR line input jacks
• Screw terminal input connectors (balanced)
• Screw terminal output connectors
(Ch. A, B, and Bridged Mono)
• Detented rotary gain controls calibrated in dB
• Signal present and OL (overload) LEDs
• Variable speed fans and large-finned heatsinks for superior cooling
• Robust chassis, proven design
• Discrete component power amplifiers
• UL - approved
• Power LED indicator
CAZ800-AMPLIFIER
-
A
-
B
Applications
• Paging Systems
• Hotel and Ballrooms
• Schools
• Foreground/Background
Music Systems
• Houses of Worship
• Meeting Rooms
• Offices
19.0 in/483 mm
Eastern Acoustic Works | One Main Street | Whitinsville, MA 01588 USA | TEL toll free within US/Canada 888.337.7404
TEL outside US 425.892.6503 | FAX 425.485.1152 | Page 1 of 4
Part No. SW0176 Rev. D 01/08
CAZ 800
STEREO POWER AMPLIFIER
PeRFoRmAnCe
inputs (balanced)
Sensitivity
Impedance
1.15 V (+3.4 dBu)
20k ohm
Maximum Input Level 9.75 V rms (+22 dBu) output
(Continuous sine wave average output power per channel with both channels driven)
205 watts per channel into 8 ohms, 20 Hz to 20 kHz
300 watts per channel into 4 ohms, 20 Hz to 20 kHz
480 watts per channel into 2 ohms, 20 Hz to 20 kHz
(Bridged Mono operation)
560 watts into 8 ohms, 20 Hz to 20 kHz
800 watts into 4 ohms, 20 Hz to 20 kHz
Note: Power ratings are specified at 120 VAC line voltage.
Power Bandwidth
5 Hz to 50 kHz (+0, –3 dB) Main In to Amp Out
Frequency Response noise
Main In to Amp Out 25 Hz to 25 kHz (+0, –1 dB)
>100 dB (below rated power into 4 ohms) Main In to Amp Out
Distortion (THD, smPTe imD)
Channel separation
Damping Factor
Voltage Gain
<0.05% @ 8 ohms
>90 dB @ 1 kHz
>300 @ 1 kHz and below
Turn on Delay
30 dB (31.6 V/V)
2.5 seconds subsonic Filter
Protection Circuitry
Topology
–9 dB @ 30 Hz, switchable
DC offset
Over-temperature
Short circuit
Current limit
Cooling indicators
Current Consumption
Idle
Musical Program @ 8 Ω 3.9 A
Musical Program @ 4 Ω 5.0 A
Musical Program @ 2 Ω 7.0 A
AC Power Requirements
U.S.
Europe
Korea
Physical
Class AB
Dual variable-speed fans with back to front airflow
Channels A and B
SIG (Signal Present), OL (Overload)
POWER
0.5 A
120 VAC, 60 Hz
240 VAC, 50 Hz
220 VAC, 60 Hz
Height
Width
Depth
Weight emC sTAnDARDs:
15.7 in/400 mm
40.3 lb/18.3 kg
U.S. -part 15 of the FCC Rules, EN55022 (Emissions)
Canada - ICES-003
3.5 in/89 mm
19.0 in/483 mm sAFeTY sTAnDARDs:
UL, cULus
Eastern Acoustic Works | One Main Street | Whitinsville, MA 01588 USA | TEL toll free within US/Canada 888.337.7404
TEL outside US 425.892.6503 | FAX 425.485.1152 | Page 2 of 4
Part No. SW0176 Rev. D 01/08
CAZ800 BloCk DiAGRAm
CAZ 800
STEREO POWER AMPLIFIER
ALS
W
IN
RE
RM
SC
TE
Eastern Acoustic Works | One Main Street | Whitinsville, MA 01588 USA | TEL toll free within US/Canada 888.337.7404
TEL outside US 425.892.6503 | FAX 425.485.1152 | Page 3 of 4
Part No. SW0176 Rev. D 01/08
CAZ 800
STEREO POWER AMPLIFIER
Csi PRoDUCT sPeCiFiCATions FoR DesiGneRs, sPeCiFieRs, AnD ConsUlTAnTs
(Also known as “A&E Specifications”)
The following are “Part 2 Products” CSI-type specifications. It is assumed that “Part 1 General – Administrative and Procedures” and “Part 3 Execution – Installation and Maintenance” are part of an overall audio system or project specification.
PART 2 PRoDUCTs
2.01 Approved manufacturer/Product
A. EAW Commercial, One Main Street, Whitinsville, MA 01588
B. Model number: CAZ800
2.02 Design
A. Configuration:
1. Inputs:
2-channel power amplifier a. Two balanced mono line inputs (two XLR/1/4" TRS combo line-level input jacks) b. One screw terminal input strip (Channel A balanced, Channel B balanced)
2. Outputs: a. One screw terminal output strip (Channel A, Channel B, Bridged Mono)
B. Powering Mode: a. Internal AC power supply, 120 VAC, 60 Hz or 230 VAC, 50/60 Hz.
2.03 electrical Properties
A. Frequency Response (+0, –1 dB):
25 Hz to 25 kHz
B. Total Harmonic Distortion (20 Hz to 20 kHz @ rated output into 8 ohms):
C. Signal-to-Noise Ratio:
F. Maximum Input Level:
G. Rated Output:
< 0.05%
>100 dB below rated power into 4 ohms
D. Channel Separation (@ 1 kHz):
E. Input Gain Control Range:
> 90 dB
Off to +30 dB
9.75 V rms (+22 dBu)
2.04 Physical Properties
A. Dimensions
1. Height:
1. Continuous sine wave average output power per channel, both channels driven: a. 205 watts rms into 8 ohms b. 300 watts rms into 4 ohms c. 480 watts rms into 2 ohms
2. Continuous sine wave average output power, bridged mono operation: a. 560 watts rms into 8 ohms b. 800 watts rms into 4 ohms
2. Width:
3. Depth:
B. Weight
1. Net Weight:
3.5 in/89 mm
19.0 in/483 mm
15.7 in/400 mm
40.3 lb/18.3 kg
Eastern Acoustic Works | One Main Street | Whitinsville, MA 01588 USA | TEL toll free within US/Canada 888.337.7404
TEL outside US 425.892.6503 | FAX 425.485.1152 | Page 4 of 4
Part No. SW0176 Rev. D 01/08
advertisement
Related manuals
advertisement