iDC-356V_User Manual_EN_V10

User Manual
IP CAMERA
1/42
WARINGS
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
PRODUCT TO RAIN OR MISTURE.
DO NOT INSERT ANY METALLIC OBJECT THROUGH VENTILATION GRILLS.
CAUTION
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION：TO REDUCE THE RISK OF ELECTRIC SHOCK.
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
COPYRIGHT
THE TRADEMARKS MENTIONED IN THE MANUAL ARE LEGALLY REGISTERED
TO THEIR RESPECTIVE COMPANIES.
2/42
Content
I.
PREFACE ....................................................................................................................................... 4
II.
PRODUCT SPECIFICATIONS ....................................................................................................... 4
III.
PRODUCT INSTALLATION ........................................................................................................... 6
A.
MONITOR SETTING..................................................................................................................................... 6
B.
HARDWARE INSTALLATION AND I/O PIN ASSIGNMENT ............................................................................... 7
C.
IP ASSIGNMENT ....................................................................................................................................... 11
D.
INSTALL ACTIVEX CONTROL: ................................................................................................................... 13
IV.
LIVE VIDEO .................................................................................................................................. 15
V.
SYSTEM CONFIGURATION ........................................................................................................ 18
A.
SYSTEM.................................................................................................................................................... 19
B.
NETWORK ................................................................................................................................................ 23
C.
A/V SETTING ........................................................................................................................................... 27
D.
EVENT LIST .............................................................................................................................................. 33
VI.
NETWORK CONFIGURATION .................................................................................................... 40
VII. FACTORY DEFAULT.................................................................................................................... 41
VIII. PACKAGE CONTENTS ............................................................................................................... 42
APPENDIX I .......................................................................................................................................... 42
V1.0_110829
3/42
I. Preface
This is a CCD IP camera with the web server built in. User can view real-time video
via IE browser. It supports H.264, JPEG and MPEG4(3GPP Only) video
compression which provides smooth and high video quality. The video can be
stored in the SD card and playback remotely.
With user friendly interface, it is an easy-to-use IP camera which is designed for
security application.
II. Product Specifications
D-WDR system t
Next Generation 3D DN
Sense-Up function
Power over Ethernet Available
H.264/ MJPEG/ MPEG4 Compression
SD Card backup
2-way audio
Support Cell phone/PDA/3GPP
SDK for Software Integration
Free Bundle 36 Channel Recording Software
Specifications
Hardware
CPU
ARM 9 ,32 bit RISC
RAM
256MB
Flash
16MB
Image sensor
1/3” CCD Senesor
Support DC IRIS
Yes
Lens Type
Vari-focal 3.7~12mm Lens
ICR
Mechanism IR cut Filiter(Optiional)
I/O
1 in/ 1 Relay Out
Video Out
x1
4/42
Audio In
x1
Audio Out
x1
Power over Ethernet
Yes (Optional)
Power Consumption
DC 12V 470mA
Dimensions
131.5mm (∅) x 94.3mm (H)
Network
Ethernet
10/ 100 Base-T
Network Protocol
HTTP, TCP/ IP, UDP, SMTP, FTP, PPPoE, DHCP,
DDNS, NTP, UPnP, 3GPP
System
Video Resolution
NTSC-720x480,704x480, 352x240, 176x144
PAL-720x576, 704x576, 352x288, 176x144
Video Adjust
Brightness, Contrast, Saturation, Hue,
Sharpness,AES,Manual shutter, IRIS, BLC,Day and
night, Night Mode,3D DNR,WDR,Flip,Mirror,SAMBA
White Balance
Auto
Triple Streaming
Yes
Image Snapshot
Yes
Full Screen Monitoring
Yes
Privacy Mask
Yes, 3 different areas
Compression Format
H.264/ JPEG/ MPEG4 (3GPP only)
Video Bitrates Adjust
CBR, VBR
Motion Detection
Yes, 3 different areas
Triggered Action
Mail, FTP, Save to SD card, Relay
Pre/ Post Alarm
Yes, configurable
Security
Password protection
Firmware Upgrade
HTTP mode, can be upgraded remotely
Simultaneous
Connection
Up to 10
Audio
Yes, 2-way
SD card management
Recording Trigger
Motion Detection, IP check, Network break down (wire
only),schedule, relay
Video Format
AVI, JPEG
Video Playback
Yes
5/42
Delete Files
Yes
Web browsing requirement
OS
Windows 2000, XP, 2003, Microsoft IE 6.0 or above
Hardware
Suggested
Intel Dual Core 1.66G,RAM: 1024MB, Graphic card: 128MB
Minimum
Intel-C 2.8G, RAM: 512MB, Graphic card: 64MB
III. Product Installation
A.
Monitor Setting
i.
Right-Click on the desktop. Select “ Properties”
ii.
Change color quality to highest (32bit).
6/42
B.
Hardware Installation and I/O Pin
Assignment
i.
ii.
Connect power adaptor
Connect IP Cam to PC or network with Ethernet cable
3.5mm Phone Jack (Audio Input, Red)
3.5mm Phone Jack (Audio Output, Green)
iii.
Set up the network configurations according to the network environment.
For further explanation, please refer to chapter VI, “Network
Configuration for IP CAMERA”.
iv.
I/O Control Instruction
I/O terminal connector – used in application, for e.g., motion detection, event
triggering, alarm notifications. It provides the interface to:
1 Digital Input (GND+Alarm) – An alarm input for connecting devices that can
toggle between an open and closed circuit, for example: PIRs, door/window
contacts, glass break detectors, etc. When a signal is received the state changes
and the input becomes active.
Relay output (COM +N.O.) / (COM+N.C.) – An output to Relay switch, for
example: LEDs, Sirens, etc
Digital Input
Alarm Input
1. GND (Ground) : Initial state is LOW
2. Alarm : Max. 50mA, DC 3.3V
7/42
Relay Output
1. N.C. (Normally Close): Max. 1A, 24VDC or 0.5A, 125VAC
2. COM: (Common)
3. N.O. (Normally Open): Max. 1A, 24VDC or 0.5A, 125VAC
ALARM IN
RELAY OUT
Relay
1. Digital Input connection
Door/Window
GND
Contacts
ALARM
N.C.
COM
N.O.
8/42
2. Relay Output Connection
GND
ALARM
N.C.
COM
N.O.
Or
GND
ALARM
N.C.
COM
N.O.
9/42
v.
PoE ( Power Over Ethernet)(Optional) 802.3af, 15.4W PoE Switch is
recommended
Power over Ethernet (PoE) is a technology that integrates power into a
standard LAN infrastructure. It enables power to be provided to the
network device, such as an IP phone or a network camera, using the
same cable as that used for network connection. It eliminates the need
for power outlets at the camera locations and enables easier application
of uninterruptible power supplies (UPS) to ensure 24 hours a day, 7 days
a week operation.
Ethernet
PoE IP Camera
PoE Switch
Ethernet Cable
Ethernet Cable
PoE IP Camera
10/42
C.
IP Assignment
i.
ii.
Use the software, “IP Installer” to assign the IP address of IP CAMERA.
The software is in the attached software CD.
IP installer supports two languages
a. IPInstallerCht.exe：Chinese version
b. IPInstallerEng.exe：English version
iii.
There are 3 kinds of IP configuration.
a. Fixed IP (Public IP or Virtual IP)
b. DHCP (Dynamic IP)
c. Dial-up (PPPoE)
iv.
v.
Execute IP Installer
For Windows XP SP2 user, it may popup the following message box.
Please click “Unblock”.
vi.
IP Installer configuration:
vii.
IP Installer will search all IP Cameras connected on Lan. The user can
click “Search Device” to search again.
11/42
viii.
Click one of the IP Camera listed on the left side. The network
configuration of this IP camera will show on the right side. You may
change the “name” of the IP Camera to your preference (eg: Office,
warehouse). Change the parameter and click “Submit” then click “OK”. It
will apply the change and reboot the Device.
ix.
Please make sure the subnet of PC IP address and IP CAM IP address
are the same.
The same Subnet:
IP CAM IP address: 192.168.1.200
PC IP address: 192.168.1.100
Different Subnets:
IP CAM IP address: 192.168.2.200
PC IP address: 192.168.1.100
To Change PC IP address:
Control PanelNetwork ConnectionsLocal Area
PropertiesInternet Protocol (TCP/IP) Properties
Connection
Please make sure your IP Camera and PC have the same Subnet. If not,
please change IP Camera subnet or PC IP subnet accordingly.
x.
A quick way to access remote monitoring is to left-click the mouse twice
on a selected IP Camera listed on “Device list” of IP Installer. An IE
browser will be opened.
12/42
xi.
D.
Then, please key in the default “user name: admin” and “password:
admin”.
Install ActiveX control:
For the first time to view the camera video via IE, it will ask you to install the
ActiveX component.
If the installation failed, please check the security setting for the IE browser.
i.
IE Tools Internet Options… Security Tab Custom Level… Security Settings Download unsigned ActiveX controls Select
“Enable” or Prompt.
ii.
IE Tools Internet Options… Security Tab Custom Level…
Initialize and script ActiveX controls not marked as safe Select
“Enable” or Prompt.
13/42
1
2
3
4
5
When popup the following dialogue box, click “Yes”.
14/42
IV. Live Video
Start a IE browser, type the IP address of the IP camera in the address field. It will
show the following dialogue box. Key-in the user name and password. The default
user name and password are “admin” and “admin”.
When connect to the IP CAMERA。The following program interface shows.
2
3
4
5
6
1
7
8
9
10
11
15/42
1.
Real-Time Display panel shows live streaming of video information
remotely.
2.
Snapshot an Evidence of important event in still JPEG format.
3.
Recording as AVI files continuously. For details, see next section.
4.
Digital Zoom for bringing up an area of interest closely. For details, see
next section.
5.
Playback SD Archives of important events captured and stored in local
SD Card medium.
6.
System Configuration for user accounts, system, network, video, audio,
events, etc.
7.
Status Bar shows system time, video resolution, and current video frame
rate.
8.
Dual Streaming Channel enables secondary viewing device (such as
mobile or PDA phones) to receive real-time streaming at
lower-yet-appropriate frame rate per second. This feature is available
only if Streaming 2 is being enabled in Video setting.
9.
Bi-directional Audio Communication enables full-duplex voice
communication between local and remote surveillance sites. To speak,
click on [Communication] box. To listen, enable Incoming Audio in
Audio setting.
10. Online Visitor shows number of users are currently accessing this IP
16/42
Double-click the video, it will change to full screen mode. Press “Esc” or double-click
the video again, it will change back to normal mode.
Right-Click the mouse on the video, it will show a pop-up menu.
1.
2.
Snapshot：Save a JPEG picture
Record Start：Record the video in the local PC. It will ask you where to save the
3.
video. To stop recording, right-click the mouse again. Select “Record Stop”. The
video format is AVI. Use Microsoft Media Player to play the recorded file.
Mute：Turn of the audio. Click again to turn on it.
4.
Full Screen：Full-screen mode.
5.
ZOOM: Enable zoom-in and zoom-out functions. Select “Enable digital zoom”
option first within the pop-up dialogue box and then drag and drop the bar to
adjust the zoom factors.
17/42
V. System Configuration
Click
to get into the administration page. Click
video page.
18/42
to go back to the live
A.System
i、 System Information
a.
Server Information: Set up the camera name, select language, and
set up the camera time.
1. Server Name：This is the Camera name. This name will show
2.
on the IP Installer.
Select language：There are English, Traditional Chinese, and
Simplified Chinese to select. When change, it will show the
following dialogue box for the confirmation of changing
language.
b.
OSD Setting: Select a position where date & time stamp / text
showing on screen.
Moreover, click Text Edit can entry to adjust the OSD contents
which is including Size and Alpha of text. Finally, click Upgrade
button to reserve the setting.
c.
Server time setting：Select options to set up time - “NTP”,
“Synchronize with PC’s time”, “Manual”, “The date and time remain
19/42
the same”.
ii、 User Management
IP CAMERA supports three different users, administrator, general user,
and anonymous user.
a.
Anonymous User Login：
Yes：Allow anonymous login
b.
No：Need user name & password to access this IP camera
Add user：
c.
Type the user name and password, then click “Add/Set”.
Click “edit” or “delete” to modify the user.
20/42
21/42
iii、 System update：
a.
b.
c.
d.
To update the firmware online, click “Browse…” to select the
firmware. Then click “Upgrade” to proceed.
Reboot system：re-start the IP camera
Factory default：delete all the settings in this IP camera.
Setting Management：User may download the current setting to PC,
or upgrade from previous saved setting.
1.
2.
Setting download:
Right-click the mouse button on Setting Download Select
“Save AS…” to save current IP CAM setting in PC Select
saving directory Save
Upgrade from previous setting
Browse search previous setting open upgrade Setting update confirm click index.html. to return to main
page
22/42
B.Network
i、 IP Setting
IP Camera supports DHCP and static IP.
a.
DHCP：Using DHCP, IP Camera will get all the network parameters
b.
automatically.
Static IP：Please type in IP address, subnet mask, gateway, and
c.
DNS manually.
Port Assignment: user may need to assign different port to avoid
conflict when setting up IP assignment.
1.
2.
3.
Web Page Port: setup web page connecting port and video
transmitting port (Default: 80)
RTSP Port: setup port for RTSP transmitting (Default: 554)
RTP Start and End Port: in RTSP mode, you may use TCP and
UDP for connecting. TCP connection uses RTSP Port (554).
UDP connection uses RTP Start and End Port.
23/42
d.
UPnP
This IP camera supports UPnP, If this service is enabled on your computer,
the camera will automatically be detected and a new icon will be added to
“My Network Places.”
Note: UPnP must be enabled on your computer.
Please follow the procedure to activate UPnP
1. open the Control Panel from the Start Menu
2. select Add/Remove Programs
3.
4.
5.
Select Add/Remove Windows Components and open
Networking Services section
Click Details and select UPnP to setup the service
The IP device icon will be added to “MY Network Places”
6.
User may double click the IP device icon to access IE browser
ii、 PPPoE：
Select “Enabled” to use PPPoE.
Key-in Username and password for the ADSL connection.
Send mail after dialed：When connect to the internet, it will send a mail
to a specific mail account. For the mail setting, please refer to “Mail and
FTP” settings.
24/42
iii、 DDNS：
It supports DDNS (Dynamic DNS) service.
a.
DynDNS：
1.
Enable this service
2.
3.
4.
5.
Key-in the DynDNS server name, user name, and password.
Set up the IP Schedule update refreshing rate.
Click “Apply”
If setting up IP schedule update too frequently, the IP may be
blocked. In general, schedule update every day (1440 minutes)
is recommended.
25/42
b.
Camddns service：
1.
c.
Please enable this service
2. Key-in user name.
3. IP Schedule update is default at 5 minutes
4. Click “Apply”.
DDNS Status
1. Updating：Information update
2. Idle：Stop service
3.
4.
DDNS registration successful, can now log by
http://<username>.ddns.camddns.com：Register successfully.
Update Failed, the name is already registered：The user name
5.
has already been used. Please change it.
Update Failed, please check your internet connection：Network
6.
connection failed.
Update Failed, please check the account information you
provide：The server, user name, and password may be wrong.
26/42
C.A/V Setting
i、 Image Setting
For the security purpose, there are three areas can be setup for privacy
mask. Click Area button first and pull a area on the above image. Finally,
click Save button to reserve the setting.
Adjust “Brightness”, “Contrast”, “Hue”, “Saturation” to get clear video.
Moreover, IP CAMERA supports “Back Light Compensation”, “Night Mode”
and “Video Orientation”.
Among CCD Setting, user can adjust “Electronic Shutter”, “IRIS Level” with
drop down list and other settings such as BLC Mode, Day & Night, Night
Mode, 3D DNR, WDR Mode and Video Orientation.
27/42
ii、 Video Setting
User may select 2 streaming output simultaneously:
Streaming 1 Setting: Basic mode and Advanced mode
Streaming 2 Setting: Basic mode, Advanced mode, and 3GPP mode
(Max Video Frame Rate for both streaming combined is 30 FPS)
a.
Streaming 1 Basic Mode：
1.
Resolution：
There are 4 resolutions can be chosen.
D1 – 720 x 480
4CIF – 704 x 480
CIF – 352 x 240
2.
QCIF – 176 x 144
Quality：
There are 5 levels to adjust:
3.
4.
Best/ High/ Standard/ Medium/ Low
The higher the quality is, the bigger the file size is. Also not
good for internet transmitting
Video Frame Rate：The video refreshing rate per second.
Video Format：H.264 or JPEG
5.
RTSP Path: RTSP output name
28/42
b.
Streaming 1 Advanced Mode：
1.
Resolution：
There are 4 resolutions can be chosen.
D1 – 720 x 480
2.
4CIF – 704 x 480
CIF – 352 x 240
QCIF – 176 x 144
Bitrate Control Mode
There are CBR﹝Constant Bit Rate﹞ and VBR﹝Variable Bit
Rate﹞to use.
CBR：32Kbps~4Mbps (the higher the CBR is, the better the
video quality is)
VBR：1(Low)~10(High) – Compression rate, the higher the
3.
compression rate, the lower the picture quality is; vise versa.
The balance between VBR and network bandwidth will affect
picture quality. Please carefully select the VBR rate to avoid
picture breaking up or lagging.
Video Frame Rate
4.
The video refreshing rate per second.
NTSC: Max 30 frames/second PAL: Max 25 frames/second
GOP Size
5.
It means "Group of Pictures". The higher the GOP is, the better
the quality is.
Video Format：H.264 or JPEG
6.
RTSP Path: RTSP output connecting route
29/42
c.
Streaming 2 Basic Mode：
1.
Resolution：
There are 4 resolutions can be chosen.
D1 – 720 x 480
4CIF – 704 x 480
d.
2.
CIF – 352 x 240
QCIF – 176 x 144
Quality：
3.
4.
There are 5 levels to adjust:
Best/ High/ Standard/ Medium/ Low
The higher the quality is, the bigger the file size is. Also not
good for internet transmitting
Video Frame Rate：The video refreshing rate per second.
Video Format：H.264 or JPEG
5.
RTSP Path: RTSP output connecting route
Streaming 2 Advanced Mode：
1.
Resolution：
There are 4 resolutions can be chosen.
D1 – 720 x 480
4CIF – 704 x 480
CIF – 352 x 240
QCIF – 176 x 144
30/42
2.
Quality：
There are 5 levels to adjust:
Best/ High/ Standard/ Medium/ Low
The higher the quality is, the bigger the file size is. Also not
e.
3.
good for internet transmitting
Video Frame Rate：
4.
The video refreshing rate per second.
Video Format：H.264 or JPEG
5.
RTSP Path: RTSP output name
3GPP Streaming mode:
3GPP mode suggested setting: 176x144 resolution, 5FPS, MPEG4 format
1.
2.
Enable or Disable 3GPP Streaming
3GPP: 3GPP output name
31/42
iii、 Audio：
IP CAMERA supports 2-way audio. User can send audio from IP
Camera Built-in mic to remote PC; User can also send audio from
remote PC to IP Camera’s external speaker.
a.
Audio from IP camera built-in mic to local PC: select “Enable” to
start this function.
b.
Audio from local PC to IP Camera: Check “Communication” in the
browsing page.
The Audio will not be smooth when enable SD card rcording
function simultaneously.
32/42
D.Event List
IP CAMERA provides multiple event settings.
i、 Event Setting
a.
Motion Detection：
IP CAMERA allows 3 areas motion detection. When motion is
triggered, it can send the video to some specific mail addresses,
transmit the video to remote ftp server, trigger the relay, and save
video to local SD card. To set up the motion area, click “Area
Setting”. Using mouse to drag and draw the area. The same
b.
operation for area 2 and 3.
Record File Setting: IP CAMERA allows 3 different types of
recording file to change its record size.
33/42
When motion/alarm is triggered, there are 3 different types of
record mode.
1. AVI File (With Record File Setting )
2. Multi-JPEG (With Record File Setting), only with JPEG
c.
compression format.
3. Single JPEG (Single File with Interval Setting)
Record Time Setting：
Pre Alarm and Post Alarm setups for video start and end time when
motion detected, I/O, or other devices got triggered.
Note: Pre/Post Alarm record time is base on record time setting and IP Cam
built-in Ram memory. Limited by IP Cam built-in Ram Memory, When information
is too much or video quality set too high, it will cause recording frame drop or
decrease on post alarm recording time.
d.
Network Dis-connected：
When the network is down, it will save the video to local SD card.
e.
This function is only enabled in wire connection.
Network IP check
When the connection is down, it records the video to SD card. Make
sure the video recording is continuous. To use this function, key in
the IP address of the PC which has recording software installed.
Enable the function of “Save to SD card”, then click “Apply”.
The interval of two video files on SD card is fixed with 30
seconds.
ii、 Schedule
a.
Schedule: After complete the schedule setup, the camera data will
be recorded according to the schedule setup.
b.
Snapshot: After enable the snapshot function, user can select the
storage position of snapshot file, the interval time of snapshot and
the reserved file name of snapshot.
34/42
iii、 I/O Setting
IP CAMERA supports 1 input/ 1 output. When input is triggered, it can
send the video to some specific mail addresses, transmit the video to
remote ftp server, trigger the relay, and save video to local SD card.
CATUTION!!
Please connect to propriety relay box to reduce the risk of electric
shock & damaged.
35/42
Alarm Input Setting
Among alarm input setting, the user can setup the connected device which
can send the signal to “relay output” when the device is triggered.
3.3V
(1) Non-Triggered
ALARM
GND
Sensor
Device
3.3V Triggered
0V
(2) Triggered
3.3V
ALARM
GND
Sensor
Device
Relay Output Setting
In relay output setting, the user can setup the output device to perform the
related output action.
I/O PIN definition, please refer to the following statement
ALARM
ALARM INPUT
Standard Voltage: 3.3V (internal Voltage)
GND
Connect “ALARM” and “GND” two pins.
N.C.
RELAY OUTPUT
Contact Rating: 30V DC/ 1A, 125V AC/ 0.3A
COM
Depends on the devices, the user should connect “N.C.” and
“COM” pins or “N.O.” and “COM” pins
N.O.
RELAY INSTALLATION EXAMPLE 1
Trigger a normal off (Normal Open) alarm siren on when event/motion
occur at COM:
36/42
9PIN D-SUB
WEB SERVER / IP CAMERA
RELAY INSTALLATION EXAMPLE 2
Trigger the normal on (Normal Close) indoor illumination off when event
/ motion occur at COM:
9PIN D-SUB
WEB SERVER / IP CAMERA
37/42
iv、 Mail & FTP
To send out the video via mail of ftp, please set up the configuration first.
v、 Log List
Sort by System Logs, Motion Detection Logs and I/O Logs. In addition,
System Logs and I/O Logs won’t lose data due to power failure.
vi、 SD card
Please Insert SD card before use it. Make sure pushing SD card into the
slot completely.
Note：The use of the SD card will affect the operation of the IP
CAMERA slightly, such as affecting the frame rate of the video.
38/42
a.
Playback：
1.
It will show the capacity of the SD card. Click the date listed on
this page. It will show the list of the video.
2.
The video format is AVI. Click the video to start Microsoft Media
3.
Player to play it.
To delete the video, check it, then click Del. When the SD card
is full, it will remove the oldest video automatically.
39/42
VI. Network Configuration
i、
Configuration 1：
a.
Internet Access：ADSL or Cable Modem
b.
IP address：One real IP or one dynamic IP
c.
d.
Only IP CAMERA connects to the internet
For fixed real IP, set up the IP into IP CAMERA. For dynamic IP, start
PPPoE.
ii、 Configuration 2：
a.
b.
Internet Access：ADSL or Cable Modem
IP address：More than one real IP or one dynamic IP
c.
d.
IP CAMERA and PC connect to the internet
Device needed：Switch Hub
e.
For fixed real IP, set up the IP into IP CAMERA and PC. For dynamic IP,
start PPPoE.
40/42
iii、 Configuration 3：
a.
b.
Internet Access：ADSL or Cable Modem
IP address：one real IP or one dynamic IP
c.
d.
IP CAMERA and PC connect to the internet
Device needed：IP sharing
e.
Use virtual IP, set up port forwarding in IP sharing.
VII. Factory Default
i、 If the user name, password, and IP address are lost, please follow the
following instructions.
ii、 Unplug the power adapter first. Then, press and hold the following button in
the back of IP Camera.
Factory default
iii、 Plug in the power adapter and do not release the button during the IP
Camera booting.
iv、 It will take around 30 seconds to boot the IP Camera.
v、 Release the button after the IP Camera finishes booting.
vi、 Reconnect the IP Camera with the default IP address (http://192.168.1.200),
user name (admin), and password (admin).
41/42
VIII. Package contents
i、 IP CAMERA Network Camera
ii、 Adaptor
iii、 Ethernet Cable
iv、 CD title (User manual, IP installation Utility)
Appendix I
SD Card Recommended：
SanDisk 128M
SanDisk 256M
SanDisk 512M
SanDisk 1G
SanDisk 2G
SanDisk 4G
SanDisk 8GB
SanDisk 16GB
SanDisk 32GB
Transcend 4GB
Transcend 8GB
Transcend 16GB
Transcend 32GB
42/42