advertisement
TECHNICAL SPECIFICATION
Power supply : 100-240V AC, 47-63Hz
Current : 120V/60Hz 1.21A, 230V/50Hz 0.57A
Power Consumption : 90W Max
LED amont : 14X 5WX 4IN1
DMX Channel : 1, 2, 4 OR 8 Channel, DMX Mode 1/2/3/4
Weight : 4.0 Kg
Dimension : 252(L) X 201(W) X 270(H) mm
8
USER INSTRUCTION
COLOR BEAM 14 FCW IR
Thank you for purchasing this product.
Thank you for purchasing this product.
For your own safety, please read this user manual carefully before you initially start-up
USER INSTRUCTION – COLOR BEAM 14 FCW IR
SAFETY INSTRUCTIONS
Every person involved with the installation, operation and maintenance of this device has to :
•
• follow the instructions of this manual
• CAUTION ! Be careful with your operations. With a dangerous voltage you can suffer a dangerous electric shock when touching the wires !
• This device has left our premises in absolutely perfect condition. In order to maintain this condition and to ensure a safe operation, it is absolutely necessary for the user to follow the safety instructions and warning notes written in this user manual.
• Important : Damages caused by the disregard of this user manual are not subject to warranty. The dealer will not accept liability for any resulting defects or problems.
• Keep away from heaters and other heating sources !
• on immediately. The arising condensation water might damage your device. Leave the device switched off until it has reached room temperature.
• Make sure that the power-cord is never crimped or damaged by sharp edges. Check the device and the power-cord from time to time.
•
2
4. MACRO VALUE (0 : BLACK, 1-35 : 35 MACRO)
255
255
255
255
128
128
255
255
255
128
128
128
128
128
128
128
128
128
255
255
255
255
255
0
0
0
128
0
0
0
0
0
R
0
0
0
0
MACRO
31
32
33
34
27
28
29
30
35
22
23
24
25
26
18
19
20
21
13
14
15
16
17
09
10
11
12
04
05
06
07
08
00
01
02
03
0
128
128
128
255
255
0
0
0
128
128
255
255
0
0
0
128
128
128
255
255
255
255
255
255
255
0
128
128
128
128
255
G
0
0
0
0
0
0
0
0
0
0
0
0
0
W
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
255
0
0
0
0
0
0
0
255
0
128
192
192
255
0
128
192
192
255
0
128
128
192
255
0
128
0
0
128
192
255
128
255
255
0
0
128
192
255
0
B
0
128
192
255
7
3. DMX FUNCTION
1 DMX mode 1 (1 CHS, Display : 1XXX; XXX= DMX address, press up/down change DMX address)
FIGURE 1
DMX mode 1
CH1(0-255)
Macro
FUNCTION
35 color setting + black
2 DMX mode 2 (2 CHS, Display : 2XXX; XXX= DMX address, press up/down change DMX address)
FIGURE 2
DMX mode 2
CH1 (0-255)
Macro
CH2 (0-255) luminance
FUNCTION
35 color setting + luminance
3 DMX mode 3 (4 CHS, Display : 3XXX; XXX= DMX address, press up/down change DMX address)
CH1 (0-255)
R
CH2 (0-255)
G
CH3 (0-255)
B
CH4 (0-255)
W
FUNCTION
R/G/B/W luminace setting
4 DMX mode 4 8 CHS, Display: 4XXX; XXX= DMX address, press up/down change DMX address)
CH8
Mode
(0-35)
Adjust colors
(36-71)
(72-107)
(108-143)
(144-179)
(180-215)
(216-251)
7 colors audio control
(252-255)
CH1
R
0
1-255
CH2
G
0
1-255
NA
NA
NA
CH3
B
0
1-255
0-77 : OFF
8-255 JOIN IN
CH4
W
0
1-255
CH5
Macro
CH6
Speed
/Strobe
CH7
Mode
CH8
MASTER
DIM
Function
0-13(off)
14-255
(macro)
NA
0-15 : static
16-255 :
16 different stobe
(0-35)
Adjust colors
No out
Dimmer
0 - 255 : min - max
RGB/ Strobe
35 color macro mode
(36-71)
(72-107)
0 - 255 :
16 different speed
(108-143)
(144-179)
(180-215)
(216-251)
Dimmer
0 - 255 : min - max
Light mode
Dim mode
Light & Dim mode
Auto mix color mode
3 color strobe
7 color strobe
NA NA
7 colors audio control
(252-255)
Dimmer
0 - 255 : min - max
Light mode 7 colors audio control (252-255)
• Shields, lenses or ultraviolet screens shall be changed if they have become visibly damaged to such an extent that their effectiveness is impaired, for example by cracks or deep scratches.
• Never let the power-cord come into contact with other cables ! Handle the power-cord and all connections with the mains with particular caution !
• Make sure that the available voltage is not higher than stated in this manual.
• Always disconnect from the mains, when the device is not in use or before cleaning it. Only handle the power-cord by the plug. Never pull out the plug by tugging the power-cord.
• During the initial start-up some smoke or smell may arise. This is a normal process and does not necessarily mean that the device is defective.
• DANGER OF BURNING ! Never touch the device during the operation ! The housing heats up to the housing temperature TSURFACE.
• Don’t switch the device on and off in short intervals as this would reduce the lamp’s life.
• HEALTH HAZARD ! Never look directly into the light source, as sensitive persons may suffer an epileptic shock (especially meant for epileptics) !
• Always disconnect from the mains, when the device is not in user or before cleaning it.
•
• Keep away children and amateurs from the device !
• There are no serviceable parts inside the device. Maintenance and service operations are only to be carried out by authorized dealers.
OPERATING INSTRUCTIONS
1) This system has DMX Online mode and Stand-alone Mode. Online mode can link other units and be controlled by the DMX controller. And Stand-alone Mode has the functions of Sound, Auto Mixcolor and
Strobe.
2) Master / Slave Setting : When Master Set on Mode 5 - Model 12 or IR Mode, The Slave set on Mode
1/2/3/4. When the Slave link on DMX Signal from Master, The Slave will auto change to Mode 3, If link off,
The Slave will back to the last mode.
3) If a DMX signal is present under Online mode, the DMX LED will blink very fast to indicate. While under
Master / Slave mode, Master’s LED indicator will light and Slave’s one will blink to indicate.
4) Display screen will turn off after 10 s. In this condition,pressing any keys is useless ; turning back when pressing any keys with 3 s. In OFF mode, IR’s function is not restrict, it runs usual, but screen is off.
5)
6) With any R/G/B/W output, the fan will on. W/O R/G/B/W output, after 3 s, the fan stops.
1. IR INSTRUCTION
BUTTON NAME
MODE
UP
DOWN
FUNCTION DESCRIPTION
Select your desire mode
DMX : select address ; run AUTO MODE.
Adjust MODE speed ; MACRO : select color.
DMX : select address ; To run AUTO MODE.
Adjust MODE speed ; MACRO : select color.
6 3
IRC161 Remote control instruction
Setup
Flash
R
Cancel
Strobe
G
OFF
Fade Smooth
B
ON
W
D14
D13
D12
D11
01) Setup : Input IR mode.
02) Cancel : Back to the last mode.
03) OFF : Fixture OFF.
04) ON : Fxin ON, and back to the last mode.
05) Flash : 7 color strobe + 8 steps adjust speed.
06) Strobe : Strobe + 8 steps adjust speed.
(R/G/B/W 0:OFF,1-255 JOIN IN).
07) Fade : Fade + 8 steps adjust speed
Color is decided by remote control
(R/G/B/W 0:OFF,1-255 JOIN IN).
08) Smooth : Auto mix color + 8 steps adjust speed.
09) DI1~DI4 : Mix with other macro mode white value (0%, 25%, 50%, 75%, 100%) or total value rate for (Flash, Strob, Fade,
Smooth) (25%, 50%, 75%,1 00%).
10) The rest keys show mix color mode .
11) The remote control had to be used < 5 metres from a Colorbeam 14 IR.
The maximum remote control ray’s angle allowed is ± 30°.
12) When remote control demision short / can not work, maybe you need to change battery.
4
DMX
MODE UP DOWN
MASTER
IRC161 Remote control instruction
Setup
Flash
00
04
07
10
13
Cancel
Strobe
01
05
08
11
14
OFF
Fade
02
06
09
12
15
ON
Smooth
03
D14
D13
D12
D11
NO.
KEY
1 Setup
2 Cancel
3 OFF
4 ON
5 Flash
6 Strobe
7 Fade
8 Smooth
9 DI1
10 DI2
11 DI3
12 DI4
13 W
14 R
15 G
16 B
17 04
18 05
19 06
20 07
21 08
22 09
23 10
24 11
25 12
26 13
27 14
28 15
DISPLAY & FUNCTION
“IRSE”
“IR05”
“IR06”
“IR07”
“IR08”
“IR09”
“IR10”
“IR11”
“IR12”
“IR13”
“IR14”
“IR15”
EXIT IR
“IRoF”
Back to last mode
“IRFL”
“IRSt”
“IRFA”
“IRSn”
Macro mode
WhiteDimmer 0%
WhiteDimmer 25%
White Dimmer 50%
White Dimmer 75%
White Dimmer100%
“IR00”
“IR01”
“IR02”
“IR04”
Function mode
Total dimmer 25%
Total dimmer 50%
Total dimmer 75%
Total dimmer 100%
“IR03”
2. DISPLAY FUNCTION INSTRUCTIONS
8
9
10
11
12
13
6
7
4
5
2
3
N0.
MODE
1 DMX mode 1 (1CHS)
DMX mode 2 (2CHS)
DMX mode 3 (3CHS)
DMX mode4 (7CHS)
Manual Macro mode
RManual mode (static)
GManual mode (static)
B Manual mode (static)
W Manual mode (static)
Manual strobe setting
Manual fade mixcolor mode
7 color strobe
Audio mode
DISPLAY
1XXX (XXX=001-512)
2XXX (XXX=001-512)
3XXX (XXX=001-512)
4XXX (XXX=001-512) ncXX (XX=00-35) rXXX (XX=00-255) gXXX (XX=00-255) bXXX (XX=00-255)
UXXX (XX=00-255)
St XX (XX=00-99)
Sh XX (XX=01-15)
FL XX (XX=01-15)
So ds-1
14
15
Display screen
Ramp Mode ds-2 dr-1 dr-X(X=2-5)
FUNCTION DESCRIPTION
Macro Mode
Macro mode (CH1) + adjust luminance (Ch2)
R(CH 1), G(CH2), B(CH3), W(CH4)
DMX MODE
35color+black, Macro value
R adjust luminance, 000-255
G adjust luminance, 000-255
B adjust luminance, 000-255
W adjust luminance, 000-255
Adjust strobe speed, 00-99 : No-strobe-strobe fastest
Adjust fade mix-color speed : 00 slowest,15fastest
Adjust 7 color strobe speed : 00 slowest,15fastest
7 color sound control
Display screen permanent light
Display screen will turn off after 10 s.
In this condition,pressing any keys is useless ; turning back after pressing keys 3 s.
The output light is normal without delay
The output light is with delay,dr-2the shortest time with delay and dr-5 is the longest time with delay.
5
advertisement
Related manuals
advertisement