Rheem RGFG-07EMCKS Prestige™ 17-1/2 in. 75000 BTU 96% AFUE 6.5 Ton Two-Stage Upflow 1/2 hp Natural or Propane Furnace Specification
Add to My manuals8 Pages
advertisement
FORM NO. G11-510 REV. 2
Supersedes Form No. G11-510 Rev. 1
GAS FURNACES
Equipped with
Comfort Control
2
System
™
• Serial communication enabled
• Increased system reliability and efficiency
• 28 on-board diagnostic and operating codes
• Active Protection ™ with homeowner
“Call for Service” alert
• Dual 7-segment LED display
Modulating Furnace Thermostat
RHC-TST550CMMS
“Visit www.Rheem.com
for complete details.”
RGFG- SERIES
Models with Input Rates from 60,000 to 120,000 BTU/HR
[17.58 to 35.16 kW]
(All Models 95% A.F.U.E.† or Above)
MINIMUM 95% A.F.U.E.
90 PLUS COMMUNICATING
MODULATING UPFLOW GAS
FURNACES EQUIPPED WITH
THE COMFORT CONTROL
2
SYSTEM AND CONTOUR
COMFORT CONTROL
®
The Rheem Prestige Series ™ 90 Plus High Efficiency line of upflow gas furnaces are designed for utility rooms, closets, or alcoves. Because of the lowprofile 34 inch height, the RGFG- model can be used vertically to satisfy most applications that traditionally call for a horizontal furnace.
The design is certified by CSA.
Features
■
The Comfort Control 2 System ™ provides 28 on-board diagnostic codes and fault history codes by detecting system and electrical problems. “Call for Service” alert notification is sent to the thermostat to alert the homeowner of required service.
■
Serial Communication Enhanced – When installed with a Serial Com muni cat ing Condensing Unit and user interface control (RHC-TST550CMMS)
500 Series thermostat this unit offers 4 or 2 wire installation, auto-configuration, and diagnostic messaging with full communicating capability.
■
Heat exchanger is constructed of all stainless steel for maximum corrosion resistance and thermal fatigue reliability.
■
Modulating Function: when used with a modulating or communicating
thermostat, modulation rate between 40% and 100% of total capacity.
■
Two-stage Function: when used with a two-stage thermostat, furnace operates at 40% on first stage, and stages up to 65%, then 100% for second stage.
■
Multistage Function: when used with a single-stage thermostat, furnace functions as a three stage furnace operating at 40%, 65% and 100% of total capacity.
■
Reduced firing rates, electrically efficient ECM 3.0 motor, and solid doors provide the ultimate in quiet operation.
■ Low speed constant fan.
■
Constant temperature rise for superior comfort.
■
Seven segment LED for system diagnostics.
■
Diagnostic history for troubleshooting.
■
Variable speed induced draft motor.
■ Hot surface ignition with remote sense.
■
Optional indoor or outdoor combustion air.
A variety of cooling coils and plenums designed to use with the Prestige
Series ™ 90 Plus gas furnaces are available as optional accessories.
✝ A.F.U.E. (Annual Fuel Utilization Efficiency) calculated in accordance with Department of Energy test procedures.
FEATURES & BENEFITS OF THE COMFORT CONTROL
2
SYSTEM
™
■ The Rheem Dual 7-Segment LED Display easily shows system operating status codes and diagnostic codes.
■ The Status Indication
System Diagnostics feature thermostat communication capability and built-in diagnostics.
The thermostat communication capability and alerts the homeowner to any necessary service requirements. Faster, more accurate service is provided by the builtin diagnostics, by providing the HVAC professional with dependable information.
■ The fault recall feature will allow for the last six fault-codes to be displayed, and will retain these codes even if power failure occurs.
■ In order to save time and money, replacement automotive style fuses can be utilized instead of replacing the entire
control board.
2 Rheem Heating, Cooling and Water Heating
PRESTIGE SERIES
™
90 PLUS HIGH EFFICIENCY
MODULATING UPFLOW GAS FURNACE
INDUCER CONTROL MODULE
REMOTE SENSOR
PRIMARY
AND SECONDARY
HEAT EXCHANGER
IN-SHOT BURNERS
HOT SURFACE IGNITOR
PRESSURE
SWITCHES
INTEGRATED
FURNACE CONTROL
GAS VALVE
BLOWER ASSEMBLY WITH
ECM MOTOR
STANDARD EQUIPMENT
Completely assembled and wired; heat exchanger; primary: 409 and aluminized
409 stainless steel, secondary: 29-4C stainless steel; induced draft; pressure switches; redundant modulating main gas control; blower compartment door safety switch; solid state time on/off blower control; limit controls; manual shutoff valve; 100% safety lock out; cool fan off delay; one hour automatic retry; power and self-test diagnostics; flame sense current diagnostics; electronic air cleaner connections; humidifier connections; humidifier on/off delay; dehumidifier connection; low speed continuous fan option; transformer; direct drive, ECM variable speed blower motor. (Please note: a thermostat is not included as standard equipment. See “Accessories”)
DRAFT INDUCER
OPTIONAL EQUIPMENT
Side and bottom filter racks; return air cabinet for all sizes.
NOTE: Furnace is not listed for use with fuels other than natural or L.P.
(propane) gas.
All models can be converted by a qualified distributor or local service dealer to use L.P. (propane) gas without changing burners. Factory approved kits must be used to convert from natural to L.P. (propane) gas and may be ordered as optional accessories from a parts distributor.
For L.P. (propane) operation, refer to Conversion Kit Index Form.
Fossil Fuel Kits for use with Heat Pumps.
Communicating Thermostat System
WARNING
THIS FURNACE IS NOT APPROVED
OR RECOMMENDED
FOR USE IN MOBILE HOMES
Rheem Heating, Cooling and Water Heating 3
BEFORE PURCHASING THIS APPLIANCE, READ IMPORTANT ENERGY COST AND EFFICIENCY INFORMATION AVAILABLE
FROM YOUR RETAILER.
PHYSICAL DATA AND SPECIFICATIONS—UPFLOW MODELS
U.S. and Canadian Models
MODEL NUMBERS
INPUT–MAXIMUM (BTU/HR) [kW]
HEATING CAPACITY–MAXIMUM [kW]
INPUT–MINIMUM (BTU/HR) [kW]
HEATING CAPACITY–MINIMUM [kW]
HEATING EXT. STATIC PRESSURE [kPa]
BLOWER (D X W IN.) [mm]
ECM MOTOR HP [W]
UNIT AMPS
MAXIMUM OVERCURRENT PROTECTION
HEATING CFM–MAXIMUM [L/s]
HEATING CFM–MINIMUM [L/s]
COOLING CFM–RANGE [L/s]
MAXIMUM EXT. STATIC PRESSURE [kPa]
TEMPERATURE RISE RANGE °F [°C]
MAX OUTLET AIR TEMPERATURE °F [°C]
RETURN AIR CABINETS–RXGR-
FILTER SIZE (IN.) [mm] BOTTOM
FILTER SIZE (IN.) [mm] SIDE
APPROX. SHIPPING WEIGHT (LBS.) [kg]
AFUE
RGFG-06EMCK
60,000 [17.58]
55,800 [16.35]
24,000 [7.03]
22,560 [6.61]
0.12 [.029]
11 x 7 [279 x 178]
1/2 [373]
8.7
15
795 [375]
320 [151]
600-1200 [283-566]
0.80 [0.20]
40-70 [22.2-38.9]
170 [76.7]
C17B
15 3 /
4 x 25 [400 x 635]
15 3 /
4 x 25 [400 x 635]
127 [57.6]
96.0%
RGFG-07EMCK
75,000 [21.98]
72,000 [21.10]
30,000 [8.79]
28,200 [8.26]
0.12 [.029]
11 x 7 [279 x 178]
1/2 [373]
8.7
15
995 [470]
430 [203]
600-1200 [283-566]
0.80 [0.20]
40-70 [22.2-38.9]
180 [82.2]
C17B
15 3 /
4 x 25 [400 x 635]
15 3 /
4 x 25 [400 x 635]
133 [60.3]
95.3%
RGFG-09EZCM
90,000 [26.38]
86,000 [25.20]
36,000 [10.55]
33,840 [9.92]
0.15 [.037]
12 x 11 [305 x 279]
1 [746]
12.0
15
RGFG-10EZCM
105,000 [30.77]
100,000 [29.31]
42,000 [12.31]
39,000 [11.57]
0.20 [.049]
12 x 11 [305 x 279]
1 [746]
12.0
15
RGFG-12ERCM
120,000 [35.17]
115,000 [33.70]
48,000 [14.07]
45,120 [13.22]
0.20 [.049]
11 x 10 [279 x 254]
1 [746]
12.0
15
1195 [564]
515 [243]
1395 [658]
600 [283]
1595 [753]
685 [323]
1200-2000 [566-944] 1200-2000 [566-944] 1200-2000 [566-944]
0.80 [0.20] 0.80 [0.20] 0.80 [0.20]
40-70 [22.2-38.9] 40-70 [22.2-38.9] 40-70 [22.2-38.9]
180 [82.2]
C21B
180 [82.2]
C21B
180 [82.2]
C24B
19 1 /
4 x 25 [489 x 635] 19 1 /
4 x 25 [489 x 635] 22 3 /
4 x 25 [578 x 635]
15 3 /
4 x 25 [400 x 635] 15 3 /
4 x 25 [400 x 635] 15 3 /
4 x 25 [400 x 635]
158 [71.7]
95.1%
162 [73.5]
95.3%
170 [77.1]
95.6%
MODEL IDENTIFICATION
R G F G — 07E M C K S
Rheem Gas
Furnace
Modulating
Prestige
Series ™
90 Plus
Gas Furnace
Design
Series
Communicating
Electric
Ignition
06E
07E
09E
10E
12E
Heating Input
Designation
Electric
Ignition–
NOx Models
06N
07N
09N
10N
—
Input
BTU/HR
60,000 [17.6 kW]
75,000 [22.0 kW]
90,000 [26.4 kW]
105,000 [30.7 kW]
120,000 [35.2 kW]
Blower Size
M = 11 x 7
[279 x 178 mm]
R = 11 x 10
[279 x 254 mm]
Z = 12 x 11
[305 x 279 mm]
Variations
C = Single/
Multi Zone
Heat/Cool
Designation
K = 600-1200 CFM
[283-566 L/s]
M = 1200-2000 CFM
[566-944 L/s]
Fuel Code
S = U.S. and
Canadian
Natural Gas
[ ] Designates Metric Conversions
4 Rheem Heating, Cooling and Water Heating
UPFLOW MODELS
MODEL
RGFG-
06
07
09
10
12
A
17 1 /
2
[445]
17 1 /
2
[445]
21 [533]
21 [533]
24 1 /
2
[622]
B
16 3 /
8
[416]
16 3 /
8
[416]
19 7 /
8
[505]
19 7 /
8
[505]
23 3 /
8
[594]
C D
15 5 /
8
[397] 2 [51]
15 5 /
8
[397] 2 [51]
19 1 /
8
[487] 2 [51]
19 1 /
8
[487] 2 [51]
22 5 /
8
[575] 2 [51]
E
15 [422]
15 [422]
18 1 /
2
[511]
18 1 /
2
[511]
22 [600]
F
13 13 /
16
[351]
13 13 /
16
[351]
17 5 /
16
[440]
17 5 /
16
[440]
20 13 /
16
[529]
LEFT
SIDE
0
0
0
0
0
RIGHT
SIDE
0
0
0
0
0
MINIMUM CLEARANCE (IN.) [mm]
BACK
0
0
0
0
0
TOP
1 [25]
1 [25]
1 [25]
1 [25]
1 [25]
FRONT
2 [51]
2 [51]
2 [51]
2 [51]
2 [51]
VENT
0
0
0
0
0
[ ] Designates Metric Conversions
Rheem Heating, Cooling and Water Heating 5
BLOWER PERFORMANCE DATA—RGFG MODELS
MODEL
RGFG-
06
07
09
10
12
BLOWER SIZE
(D x W)
IN. [mm]
11 x 7
[279 x 178]
11 x 7
[279 x 178]
12 x 11
[305 x 279]
12 x 11
[305 x 279]
11 x 10
[279 x 254]
ECM
MOTOR H.P.
[W]
1/2
[373]
1/2
[373]
1
[746]
1
[746]
1
[746]
BLOWER
SPEED
(SELECTED W/DIP
SWITCHES)
HIGH
MED-HI
MED
LOW
HIGH
MED-HI
MED
LOW
HIGH
MED-HI
MED
LOW
HIGH
MED-HI
MED
LOW
HIGH
MED-HI
MED
LOW
[ ] Designates Metric Conversions
CFM [L/s] AIR DELIVERY
EXTERNAL STATIC PRESSURE
INCHES WATER COLUMN [kPa]
0.1 [.02]-0.8 [.20]
1200 [566]
1000 [472]
800 [378]
600 [283]
1200 [566]
1000 [472]
800 [378]
600 [283]
2000 [944]
1600 [755]
1400 [661]
1200 [566]
2000 [944]
1600 [755]
1400 [661]
1200 [566]
2000 [944]
1600 [755]
1400 [661]
1200 [566]
6 Rheem Heating, Cooling and Water Heating
ACCESSORIES—UPFLOW
VENT TERMINATION KITS CONCENTRIC: HORIZONTAL/
VERTICAL =
RXGY-E03A (US & Canadian Installations)
HORIZONTAL TWO PIPE: RXGY-D02, RXGY-D03, RXGY-D04
(US Installations)
RXGY-D02A, RXGY-D03A, RXGY-D04A (Canadian Installations)
RXGY-G02 (US Only)
CONDENSATE PUMP KIT: RXGY-B01
NEUTRALIZER KIT: RXGY-A01
RETURN AIR PLENUM: RXGR-C17B
RXGR-C21B
RXGR-B24B
EXTERNAL BOTTOM FILTER RACK: RXGF-CB
EXTERNAL SIDE FILTER RACK: RXGF-CA
MODEL
RGFG-
06
07
09
10
12
FILTER RACK FILTER SIZES* INCHES [mm]
RXGF-CB
(BOTTOM)
15 3 /
4 x 25
[400 x 635]
RXGF-CA
(SIDE)
15 3 /
4 x 25
[400 x 635]
15 3 /
4 x 25
[400 x 635]
19 1 /
4 x 25
[489 x 635]
19 1 /
4 x 25
[489 x 635]
22 3 /
4 x 25
[578 x 635]
15 3 /
4 x 25
[400 x 635]
15 3 /
4 x 25
[400 x 635]
15 3 /
4 x 25
[400 x 635]
15 3 /
4 x 25
[400 x 635]
*Filter racks are shipped without filters.
Filters shipped with furnace may be used or a suitable 1" [25.4 mm] filter.
PLENUM DATA FOR “A” COILS
Plenum adapters are required in some instances for use on upflow applications when plenum and furnace size do not match.
FURNACE
WIDTH
IN. [mm]
17 1 /
2
[445]
17 1 /
2
[445]
17 1 /
2
[445]
17 1 /
2
[445]
21 [533]
21 [533]
21 [533]
24 1 /
2
[622]
24 1 /
2
[622]
PLENUM
WIDTH
IN. [mm]
16 1 /
4
[413]
20 1 /
4
[514]
21 5 /
8
[549]
25 1 /
4
[641]
25 1 /
4
[641]
22 1 /
4
[565]
21 5 /
8
[549]
25 1 /
4
[641]
21 5 /
8
[549]
PLENUM ADAPTER
UPFLOW
RXAA-C185
RXAA-C173
RXAA-C187
RXAA-C174
RXAA-C175
RXAA-C176
RXAA-C188
RXAA-C177
RXAA-C187
Note: See Form Number C11-206 for MultiFlex ® coil data.
COIL
PLENUM
RXAL-B16BU
RXAL-B20BU
RXAL-B21BU
RXAL-B25BU
RXAL-B25BU
RXAL-B22BU
RXAL-B21BU
RXAL-B25BU
RXAL-B21BU
LP KIT: (Available through PROSTOCK ® )
U.S./Canadian = RXGJ-FP27 (HU Fuel codes).
THERMOSTATS
RECOMMENDED MODULATING FURNACE THERMOSTAT
RHC-TST550CMMS
CONTRACTOR BENEFITS:
• Multi-Purpose Thermostat-Setup, Control & Diagnostics
• Auto-Configuration – No Manual Settings Required in the Field
• System History – More Accurate Diagnostics
• Easy Installation – Requires only 4 wires
• Diagnostic Messages (Service Access to Fault Codes)
• Blower Adjustment in Heat and Cool
• Programmable Fan
• USB Interface for contractor contact information and thermostat programming
HOMEOWNER BENEFITS:
• Scrolling System Status
• De-Humidification Control
• Humidification Control
• Heat/Cool/Auto Change-over
• Outdoor Temperature Display
• Backlight On/Off
• Intelligent Scheduling Ramp-Up/Program Anticipation
• Audio Notifications On/Off
• Air Filter, UV Lights & Humidifier Maintenance Reminder
• Temperature Offset
• Continuous Fan (Hi, Med, Lo)
FOSSIL FUEL KIT
RXPF-F02
*PROGRAMMABLE THERMOSTAT ACCESSORIES:
Adapter Plate = F61-2600
Remote F1451328 and F1451378 Sensor
*Available through PROSTOCK ® .
[ ] Designates Metric Conversions
Rheem Heating, Cooling and Water Heating 7
ACCESSORIES—UPFLOW (con’t.)
FOR HIGH ALTITUDES:
Installations up to 8,000 ft. do not require a special kit or option.
However, an orifice change may be required based on heating value and elevation. See Installation Instructions for more information.
CAUTION: Always follow National Fuel Gas Code (NFGC) guidelines when converting furnaces for high altitudes.
For all installations above 2000 ft. the burner orifice size needs to be recalculated and verified at elevations above 2000 ft. A burner orifice change may still be required. See Installation Instructions for more information.
Manifold gas pressure reduction methods to adjust for altitude may
NOT be used on these models. The only method permitted on modulating furnace models is to recalculate the burner orifice size.
See Installation Instructions for more information.
[ ] Designates Metric Conversions
GENERAL TERMS OF LIMITED WARRANTY*
Rheem will furnish a replacement for any part of this product which fails in normal use and service within the applicable period stated, in accordance with the terms of the limited warranty.
Primary and Secondary Heat Exchanger ......Limited Lifetime
Conditional Unit Replacement Warranty*
(Registration Required) ..............................Limited Lifetime
Parts ..........................................................Ten (10) Years
*For Complete Details of the Limited Warranty, Including Applicable Terms and Conditions, See Your Local Installer or Contact the Manufacturer for a Copy.
Before proceeding with installation, refer to installation instructions packaged with each model, as well as complying with all Federal, State, Provincial, and
Local codes, regulations, and practices.
Rheem Heating,
Cooling and
Water Heating
P.O. Box 17010, Fort Smith, AR 72917
“In keeping with its policy of continuous progress and product improvement, Rheem reserves the right to make changes without notice.”
PRINTED IN U.S.A.
3-11 DC FORM NO. G11-510 REV. 2
Supersedes Form No. G11-510 Rev. 1
advertisement
Related manuals
advertisement