- Industrial & lab equipment
- Electrical equipment & supplies
- Circuit protection
- Surge protectors
- User manual
advertisement
RLW Reactors
Selection Table, Technical Details & Product Application Guide
The MTE RLW REACTOR is MTE’s newest reactor line that, like our RL Reactor product line, keeps equipment running longer by absorbing many of the power line disturbances which otherwise damage or shut down inverters, variable frequency drives (VFDs), variable speed controllers, and other sensitive equipment. They are a state-of-the-art filtering solution for virtually any 4 or 6 pulse rectifier or power conversion unit.
The RLW is primarily applied to LINE SIDE applications, where the majority of reactors are used, but it can be applied to LOAD SIDE uses as well. For load side applications, contact MTE’s
Application Engineering group for sizing recommendations and complete application support based on your system requirements.
KEY FEATURES of the MTE RLW Reactor Include:
• Optimized design for peak performance in a compact and
lightweight package
• Small footprint, ideal for OEM’s, Integrators, and Panel
Builders
• Smaller size and weight than other standard reactor
products available in the industry
• Adapter plate allows for drop-in replacement of other
reactors (available on most models)
• DIN Rail mounting option
• Expanded inductance values and low
current offerings to support both NEC
and IEC world-wide motor applications
• Suitable for application to single phase
drives to provide transient protection
as well
• Crossover Tables available for other
standard reactors
• Ratings from 0.5A through 750A available
Functional Features Include:
• Virtual Elimination of Nuisance Tripping
• Extension of Semiconductor Life
• Reduction in Harmonic Distortion
Appropriately applied output features include motor protection from long leads, output dV/dT, reduced motor temperatures and reduced audible noise.
MTE RLW Reactor shown on line side of drive
The Global Power Quality Resource
MTE Corporation - Menomonee Falls, WI - 1-800-455-4MTE - www.mtecorp.com
Selection Table RLW Ratings Selection & Part Number Guide
40
50
60
75
100
10
15
20
25
30
3
5
1.5
2
7.5
0.25
0.33
0.5
0.75
1
125
150
200
250
30.8
46.2
59.4
74.8
88.0
114.0
143.0
169.0
211.0
273.0
6.6
7.5
10.6
16.7
24.2
1.4
1.8
2.4
3.5
4.6
343.0
396.0
528.0
687.5
Selection Guide by HP and 208 Volts - Open Style
HP @
208V
60Hz FLA 3% Impedance
RLW-01P601
RLW-02P101
RLW-03P401
RLW-07P603
RLW-04P801
RLW-07P601
RLW-07P601
RLW-001101
RLW-002101
RLW-002801
RLW-004601
RLW-006501
RLW-008301
RLW-010401
RLW-010401
RLW-016001
RLW-020001
RLW-020001
RLW-025001
RLW-041401
RLW-051501
RLW-051501
RLW-075001
RLW-075001
5% Impedance
RLW-02P103
RLW-03P403
RLW-03P403
RLW-04P803
RLW-07P603
RLW-001103
RLW-001103
RLW-001403
RLW-002803
RLW-003503
RLW-004603
RLW-006503
RLW-008303
RLW-010403
RLW-013003
RLW-016003
RLW-020003
RLW-025003
RLW-032203
RLW-032201
RLW-051503
RLW-041401
RLW-075003
RLW-075001
Selection Guide by HP and 240 Volts - Open Style
FLA
22.0
28.0
42.0
54.0
68.0
80.0
104.0
4.2
6.0
6.8
9.6
15.2
1.3
1.7
2.2
3.2
130.0
154.0
192.0
248.0
312.0
360.0
480.0
600.0
720.0
HP @
240V
60Hz
7.5
10
15
20
25
30
40
0.25
0.33
0.5
0.75
1
1.5
2
3
5
50
60
75
100
125
150
200
250
300
3% Impedance
RLW-01P601
RLW-03P403
RLW-04P803
RLW-03P401
RLW-04P801
RLW-001103
RLW-07P601
RLW-001101
RLW-002803
RLW-002801
RLW-002801
RLW-005501
RLW-006501
RLW-008301
RLW-008301
RLW-010401
RLW-016001
RLW-016001
RLW-020001
RLW-025001
RLW-041401
RLW-041401
RLW-051501
RLW-075001
RLW-075001
5% Impedance
RLW-01P603
RLW-02P103
RLW-04P805
RLW-04P803
RLW-04P803
RLW-07P603
RLW-07P603
RLW-001103
RLW-002103
RLW-002803
RLW-003503
RLW-005503
RLW-006503
RLW-008303
RLW-010403
RLW-013003
RLW-016003
RLW-020003
RLW-025003
RLW-032203
RLW-041403
RLW-051503
RLW-060003
RLW-075003
RLW-075001
Selection Guide by KW and 400 Volts - Open Style
FLA
56.3
69.8
82.5
100.9
137.7
163.9
197.9
269.7
322.0
376.4
449.1
582.0
727.5
4.9
8.2
11.2
15.0
21.8
29.1
34.9
41.7
0.6
0.7
1.2
1.6
1.9
2.5
3.4
KW @
400V
50Hz
112
150
187
225
262
300
375
18.5
22
30
37.5
45
55
75
93
2.2
3.7
5.5
7.5
11
15
0.18
0.25
0.37
0.55
0.75
1.1
1.5
3% Impedance
RLW-01P106
RLW-01P105
RLW-02P105
RLW-01P603
RLW-02P103
RLW-04P805
RLW-03P403
RLW-07P605
RLW-001103
RLW-001403
RLW-002105
RLW-002803
RLW-003503
RLW-003503
RLW-004603
RLW-006503
RLW-008303
RLW-008303
RLW-010403
RLW-016003
RLW-020003
RLW-020003
RLW-032203
RLW-032203
RLW-041403
RLW-051503
RLW-060003
RLW-075003
5% Impedance
RLW-0P7506
RLW-0P7505
RLW-01P606
RLW-01P605
RLW-02P105
RLW-03P406
RLW-03P405
RLW-07P606
RLW-001106
RLW-001406
RLW-002106
RLW-002806
RLW-003505
RLW-004605
RLW-004605
RLW-006505
RLW-008305
RLW-008305
RLW-010405
RLW-016005
RLW-020005
RLW-020005
RLW-032205
RLW-041405
RLW-041405
RLW-051505
RLW-060005
RLW-075005 For detailed product specifications refer to the RLW User Manual.
25
30
40
50
60
5
7.5
10
15
20
0.25
0.33
0.5
0.75
1
1.5
2
3
250
300
350
400
450
75
100
125
150
200
500
600
34.0
40.0
52.0
65.0
77.0
7.6
11.0
14.0
21.0
27.0
0.7
0.8
1.1
1.6
2.1
3.0
3.4
4.8
96.0
124.0
156.0
180.0
240.0
302.0
361.0
414.0
477.0
515.0
590.0
708.0
Selection Guide by HP and 480 Volts - Open Style
HP @
480V
60Hz FLA 3% Impedance
RLW-01P105
RLW-01P606
RLW-01P103
RLW-01P603
RLW-02P103
RLW-04P805
RLW-03P403
RLW-04P803
RLW-07P603
RLW-001103
RLW-001403
RLW-002103
RLW-002803
RLW-003503
RLW-004603
RLW-006503
RLW-006503
RLW-008303
RLW-010403
RLW-013003
RLW-016003
RLW-020003
RLW-025003
RLW-032203
RLW-041403
RLW-051503
RLW-051503
RLW-060003
RLW-060003
RLW-075003
5% Impedance
RLW-0P7506
RLW-01P106
RLW-01P105
RLW-01P605
RLW-02P105
RLW-03P405
RLW-03P405
RLW-04P805
RLW-07P605
RLW-001105
RLW-001405
RLW-002105
RLW-002805
RLW-004605
RLW-004605
RLW-005505
RLW-008305
RLW-008305
RLW-010405
RLW-013005
RLW-016005
RLW-020005
RLW-025005
RLW-032205
RLW-041405
RLW-051505
RLW-051505
RLW-060005
RLW-060005
RLW-075005
FLA
99.0
125.0
144.0
192.0
242.0
289.0
336.0
382.0
412.0
472.0
576.0
672.0
32.0
41.0
52.0
62.0
77.0
9.0
11.0
17.0
22.0
27.0
1.7
2.4
2.7
3.9
6.1
0.5
0.7
0.9
1.3
Selection Guide by HP and 600 Volts - Open Style
HP @
600V
60Hz
40
50
60
75
100
125
150
200
250
300
350
400
450
500
600
700
10
15
20
25
30
1.5
2
3
5
7.5
0.25
0.33
0.5
0.75
1
3% Impedance
RLW-0P7506
RLW-01P106
RLW-01P606
RLW-02P106
RLW-02P105
RLW-03P405
RLW-04P806
RLW-04P805
RLW-07P605
RLW-001105
RLW-001405
RLW-002105
RLW-002805
RLW-002803
RLW-004605
RLW-005505
RLW-005503
RLW-006503
RLW-010405
RLW-013005
RLW-016005
RLW-020005
RLW-025005
RLW-032205
RLW-041405
RLW-051505
RLW-041403
RLW-041403
RLW-060005
RLW-075005
RLW-075003
5% Impedance
RLW-00P506
RLW-0P7506
RLW-01P106
RLW-01P606
RLW-02P106
RLW-03P406
RLW-03P406
RLW-04P806
RLW-07P606
RLW-001106
RLW-001406
RLW-002106
RLW-002806
RLW-002806
RLW-003505
RLW-004605
RLW-005505
RLW-006505
RLW-008305
RLW-010405
RLW-013005
RLW-016005
RLW-020005
RLW-025005
RLW-032205
RLW-041405
RLW-041405
RLW-041405
RLW-051505
RLW-060005
RLW-075005
Selection Guide by KW and 690 Volts - Open Style
FLA
158.0
198.0
235.0
285.0
340.0
385.0
432.0
480.0
540.0
39.0
47.0
56.0
76.0
92.0
110.0
130.0
2.8
3.7
4.8
6.6
8.8
12.4
16.6
20.5
24.0
32.0
KW @
690V
50Hz
300
375
450
550
600
675
750
150
187
225
262
45
55
75
93
112
2.2
3.7
5.5
7.5
11
15
18.5
22
30
37.5
3% Impedance
RLW-03P406
RLW-04P806
RLW-04P805
RLW-07P606
RLW-001106
RLW-001406
RLW-002106
RLW-002105
RLW-002806
RLW-003505
RLW-004605
RLW-005505
RLW-006505
RLW-008305
RLW-010405
RLW-013005
RLW-013005
RLW-016005
RLW-020005
RLW-025005
RLW-032205
RLW-041405
RLW-041405
RLW-051505
RLW-051505
RLW-060005
4% Impedance
RLW-03P406
RLW-04P806
RLW-04P806
RLW-07P606
RLW-001106
RLW-001406
RLW-002106
RLW-002106
RLW-002806
RLW-003505
RLW-004605
RLW-005505
RLW-006505
RLW-008305
RLW-010405
RLW-013005
RLW-013005
RLW-016005
RLW-020005
RLW-025005
RLW-032205
RLW-041405
RLW-041405
RLW-051505
RLW-051505
RLW-060005
Note: The effective impedance of the reactor changes with actual RMS current through the reactor as seen in the equation below. A 5% impedance reactor becomes 3% if its current is reduced to 60%.
Notes:
This table is suitable for selection of an input 3-phase reactor. For use as output
3-phase reactors, de-rate the current to 80% with a 100 foot lead length limit.
Specific current & inductance ratings are indicated on Pages 4 & 5. Consult factory for any special applications (higher current, motor rating different than controller rating, etc).
Select RLW reactors based upon motor horsepower (or kilowatts) and voltage.
Verify that the motor full load ampere name plate rating is within the RMS current rating of the reactor, & the drive/inverter rating is within the maximum continuous current rating of the reactor.
Impedance Rating:
3% impedance reactors are typically sufficient to absorb power line spikes and motor current surges. They will prevent nuisance tripping of drives or circuit breakers in most applications.
5% impedance reactors are best for reducing harmonic currents and frequencies. Use them when you must reduce VFD drive generated harmonics, and to reduce motor operating temperature, or to reduce motor noise.
% impedance
=
I
RMS x 2 pF
50/60Hz x L
RLinductance x √3
V
L-L x 100
The Global Power Quality Resource
MTE Corporation - Menomonee Falls, WI - 1-800-455-4MTE - www.mtecorp.com
Selection Table RLW Electrical Data & Application Notes
RMS
Amps
0.5
0.75
1.1
1.6
2.1
3.4
4.8
7.6
11
14
21
28
35
46
55
65
83
104
130
160
200
250
322
414
515
600
750
4.8
6
1
2.1
3.3
4.3
0.79
1.6
2.6
3.3
0.53
1.1
1.8
2.2
0.39
0.82
1.3
1.6
0.35
0.71
1.2
0.3
0.55
0.98
0.27
0.48
11
14
2.3
4.8
7.7
10
1.5
3
23
29
5.3
11
18
22
3.2
6.8
Inductance mH
22
46
74
92
15
31
49
61
10
21
33
42
6.9
14
0.06
0.115
0.195
0.05
0.095
0.155
0.05
0.07
0.13
0.033
0.066
0.11
0.025
0.05
0.08
0.02
0.04
0.065
0.017
0.035
0.055
0.75
0.19
0.38
0.64
0.17
0.29
0.51
0.12
0.23
0.375
0.095
0.18
0.3
0.08
0.155
0.26
46.7
58.4
70.9
83
55.4
69
84.7
91
65.1
87.9
102.4
118.8
80
100
135
158.6
101
147
158
98
140
235
119
153
14.1
19.8
25.6
29
19.4
27.3
36.6
43.4
23.2
32
49.2
53.6
32.2
52.8
60.7
68.9
3.8
6.9
8.1
8.8
7.7
10.1
12.2
13.7
8.4
11.6
14.3
16.7
10.6
15.7
20.3
23.5
494
333
531
588
314
496
695
375
159
224
293
275
284
402
300
383
747
780
468
838
858
200
208
132
152
197
110
195
309
207
132
166
281
192
235
276
94
Open PN
RLW-00P501
RLW-00P503
RLW-00P505
RLW-00P506
RLW-0P7501
RLW-0P7503
RLW-0P7505
RLW-0P7506
RLW-01P101
RLW-01P103
RLW-01P105
RLW-01P106
RLW-01P601
RLW-01P603
RLW-01P605
RLW-01P606
RLW-02P101
RLW-02P103
RLW-02P105
RLW-02P106
RLW-03P401
RLW-03P403
RLW-03P405
RLW-03P406
RLW-04P801
RLW-04P803
RLW-04P805
RLW-04P806
RLW-07P601
RLW-07P603
RLW-07P605
RLW-07P606
RLW-001101
RLW-001103
RLW-001105
RLW-001106
RLW-001401
RLW-001403
RLW-001405
RLW-001406
RLW-002101
RLW-002103
RLW-002105
RLW-002106
RLW-002801
RLW-002803
RLW-002805
RLW-002806
RLW-003501
RLW-003503
RLW-003505
RLW-004601
RLW-004603
RLW-004605
RLW-005501
RLW-005503
RLW-005505
RLW-006501
RLW-006503
RLW-006505
RLW-008301
RLW-008303
RLW-008305
RLW-010401
RLW-010403
RLW-010405
RLW-013001
RLW-013003
RLW-013005
RLW-016001
RLW-016003
RLW-016005
RLW-020001
RLW-020003
RLW-020005
RLW-025001
RLW-025003
RLW-025005
RLW-032201
RLW-032203
RLW-032205
RLW-041401
RLW-041403
RLW-041405
RLW-051501
RLW-051503
RLW-051505
RLW-060001
RLW-060003
RLW-060005
RLW-075001
RLW-075003
RLW-075005
Watts Loss
Standard Application of RLW Reactors:
On the input of motor VFD controller or six-pulse nonlinear load, RLW Reactors protect sensitive electronic equipment from electrical noise created by the drive or inverter (notching, pulsed distortion or harmonics). RLW Reactors protect the controller from surges or spikes on the incoming power lines and reduce harmonic distortion. They help to reduce
VFD produced non-linear current harmonics that may cause voltage distortion and affect other devices powered from the same AC mains.
Multiple drives or inverters on a common power line require one reactor per controller. Individual reactors provide filtering between each controller (reducing crosstalk) and also provide optimum surge protection for each unit. A single reactor serving several controllers does not provide adequate protection, filtering or harmonic reduction when the system is partially loaded.
Single Phase input configured drives can be protected from spikes and transient voltage by using standard 3-phase RLW
World Reactors for 1- phase applications by routing each of the two supply conductors through an outside coil and leaving the center open. Application Note AN0102 details this use.
Note that the single drive input current is √3 (SQRT 3) times the 3-phase motor values.
In extended motor lead applications up to 100 feet use RLW
Reactors between the inverter & motor to reduce dV/dT & motor terminal peak voltage, de-rating them to 80% of nominal current. The use of a separate load reactor also protects the controller from surge current caused by a rapid change in the load, & even from a short circuit at the load. MTE Reactors also reduce operating temperature & audible noise in motor loads. For a guaranteed long lead solution up to 1000 feet use the MTE Series A dV/dT Filter. More than one motor on a single drive presents a complex load not suited to reactor protection. Use an MTE Series A Sine Wave Filter when there is a need to protect more than one motor or for single motor distances to 15,000 feet.
The Global Power Quality Resource
MTE Corporation - Menomonee Falls, WI - 1-800-455-4MTE - www.mtecorp.com
Selection Table RLW Reactor Weight & Dimensions
RMS
Amps
0.5
0.75
1.1
1.6
2.1
3.4
4.8
7.6
11
14
21
28
Open Part Number
Open PN Wt
RLW-00P501
RLW-00P503
RLW-00P505
RLW-00P506
RLW-0P7501
RLW-0P7503
RLW-0P7505
RLW-0P7506
RLW-01P101
RLW-01P103
RLW-01P105
RLW-01P106
RLW-01P601
RLW-01P603
RLW-01P605
RLW-01P606
RLW-02P101
RLW-02P103
RLW-02P105
RLW-02P106
RLW-03P401
RLW-03P403
RLW-03P405
RLW-03P406
RLW-04P801
RLW-04P803
RLW-04P805
RLW-04P806
RLW-07P601
RLW-07P603
RLW-07P605
RLW-07P606
RLW-001101
RLW-001103
RLW-001105
RLW-001106
RLW-001401
RLW-001403
RLW-001405
RLW-001406
RLW-002101
RLW-002103
RLW-002105
RLW-002106
RLW-002801
RLW-002803
RLW-002805
RLW-002806
1.8
2.8
4.1
4.2
1.7
1.8
2.8
4.0
1.6
1.6
2.7
2.8
1.5
1.6
1.7
1.7
1.5
1.6
1.6
1.7
1.5
1.6
1.6
1.7
1.4
1.5
1.5
1.6
1.5
1.5
1.6
1.6
4.2
7.2
10.0
13.3
5.1
9.5
10.4
14.3
2.8
4.3
7.1
9.4
2.7
4.2
5.3
7.1
Specifications continued on next page...
Fig
1 - 2
1 - 2
3
3
1 - 2
3
3
3
1 - 2
1 - 2
1 - 2
1 - 2
1 - 2
1 - 2
3
3
1 - 2
1 - 2
1 - 2
1 - 2
1 - 2
1 - 2
1 - 2
1 - 2
1 - 2
1 - 2
1 - 2
1 - 2
1 - 2
1 - 2
1 - 2
1 - 2
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
A
4.5
4.5
4.4
4.4
4.5
4.4
4.4
4.4
4.5
4.5
4.5
4.5
4.5
4.5
4.4
4.4
4.5
4.5
4.5
4.5
4.5
4.5
4.5
4.5
4.5
4.5
4.5
4.5
4.5
4.5
4.5
4.5
4.4
6
6
7.2
4.4
6
6
7.2
4.4
4.4
4.4
6
4.4
4.4
6
6
Dimension in inches
B C
3.7
3.7
5
5
3.7
5
5
5
3.7
3.7
3.7
3.7
3.7
3.7
5
5
3.7
3.7
3.7
3.7
3.7
3.7
3.7
3.7
3.7
3.7
3.7
3.7
3.7
3.7
3.7
3.7
5.3
6.1
6.1
7
5.3
6.1
6.1
7
5
5
5
5.8
5.3
5
5.8
5.8
1.5
1.5
2.8
3.1
1.5
2.8
3.1
3.1
1.5
1.5
1.5
1.5
1.5
1.5
2.8
2.8
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
3.3
2.9
3.3
3.8
3.5
3.3
3.3
3.8
2.8
3.1
3.5
2.9
2.8
3.1
2.9
3.3
Specifications subject to change without notice
D
0.0
0.0
2.0
2.1
0.0
2.0
2.1
2.1
0.0
0.0
0.0
0.0
0.0
0.0
2.0
2.0
0.0
0.0
0.0
0.0
0.0
0.0
0.0
0.0
0.0
0.0
0.0
0.0
0.0
0.0
0.0
0.0
2.4
2.1
2.5
2.3
2.6
2.5
2.3
2.3
2.0
2.1
2.6
2.1
2.0
2.1
2.1
2.5
E
4.0
4.0
1.4
1.4
4.0
1.4
1.4
1.4
4.0
4.0
4.0
4.0
4.0
4.0
1.4
1.4
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
1.4
2.0
2.0
3.0
1.4
2.0
2.0
3.0
1.4
1.4
1.4
2.0
1.4
1.4
2.0
2.0
OPTIONS:
KIT-0038 - DIN rail
Mount.
A DIN rail mounting option is provided to utilize standard panel mounted
35mm DIN rail for securing the reactor via two steel mounting clips.
KIT-0039 - RL base
mount converter plate.
The base plate adapter option will allow the
RLW to use existing RL bolt hole mounting patterns.
KIT-0040 - Vibration pads for enclosure mounting.
Enclosed reactors may be fitted with an optional vibration pad to dampen cabinet vibrations from the reactor.
Figure 1 - Snap Base Mount Figure 2 - 35mm DIN Rail Mount Figure 3 - Standard Mounting
The Global Power Quality Resource
MTE Corporation - Menomonee Falls, WI - 1-800-455-4MTE - www.mtecorp.com
Selection Table RLW Reactor Weight & Dimensions ... Continued
RMS
Amps
35
46
55
65
83
104
130
160
200
250
322
414
515
600
750
Open Part Number
Open PN Wt Fig
RLW-003501 10
RLW-003503 13
RLW-003505 18
RLW-004601 13
RLW-004603 17
3
3
3
3
3
RLW-004605 24
RLW-005501 18
RLW-005503 20
RLW-005505 26
RLW-006501 18
RLW-006503 22
RLW-006505 26
RLW-008301 19
RLW-008303 26
RLW-008305 35
RLW-010401 22
RLW-010403 28
RLW-010405 41
RLW-013001 26
RLW-013003 37
RLW-013005 52
RLW-016001 34
RLW-016003 49
RLW-016005 53
RLW-020001 34
RLW-020003 49
RLW-020005 75
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
RLW-025001 35
RLW-025003 55
RLW-025005 75
RLW-032201 57
RLW-032203 76
RLW-032205 108
RLW-041401 78
3
3
3
3
3
3
3
3
3
RLW-041403 98
RLW-041405 125
RLW-051501 81
RLW-051503 118
RLW-051505 193
RLW-060001 86
RLW-060003 144
3
3
3
3
3
3
3
3
3
3
RLW-060005 204
RLW-075001 105
RLW-075003 179
RLW-075005 245
3
3
3
3
Dimension in inches
A B C D E F
6.0 6.0 3.5 2.73 2.0 3.0
7.2 6.0 3.75 2.25 3.0 -
7.2 6.0 4.3 2.75 3.0 -
7.2 6.0 3.75 2.25 3.0 -
7.2 6.0 4.3 2.75 3.0 -
9 8.3 4.8 3.24 3.0 4.26
7.2 6.0 4.0 2.75 3.0 -
7.2 6.0 4.25 2.75 3.0 -
9.0 7.0 6.5 3.24 3.0 4.26
7.2 6.0 4.0 4.25 3.0 -
7.2 6.0 4.25 2.75 3.0 -
9.0 7.0 6.5 3.24 3.0 4.26
7.2 6.0 4.25 2.75 3.0 -
9.0 7.0 6.5 3.24 3.0 4.26
9.0 7.0 6.75 3.74 3.0 4.26
7.2 6.0 6.5 2.75 3.0 4.26
9.0 7.0 7.00 3.24 3.0 4.26
9.0 7.0 7.25 4.24 3.0 4.26
9.25 7.5 6.75 3.25 3.0 4.26
9.25 7.5 6.75 3.75 3.0 4.26
9.25 7.5 8.25 4.75 3.0 4.26
9.25 7.5 6.75 3.75 3.0 4.26
9.25 7.5 8.25 4.75 3.0 4.26
9.25 7.5 8.25 4.75 3.0 4.26
9.25 7.5 7.00 3.75 3.0 4.26
9.25 7.5 8.25 4.75 3.0 4.26
10.8 8.25 9.00 5.87 3.63 5.58
9.25 7.5 7.50 3.75 3.0 4.26
9.25 7.5 8.50 4.75 3.0 4.26
10.8 8.75 9.00 5.87 3.63 5.58
9.25 7.5 9.00 4.75 3.0 4.26
10.8 8.75 8.5 5.37 3.63 5.58
9.0 8.75 11.0 7.37 3.63 5.58
9.0 8.75 9.5 5.37 3.63 5.58
9.0 8.75 11.5 6.87 3.63 5.58
9.0 8.75 12.5 7.37 3.63 5.58
9.0 8.75 9.5 5.37 3.63 5.58
9.0 8.75 12.0 6.37 3.63 5.58
14.4 11.5 13.5 9.62 4.6 5.9
9.0 8.75 10.5 5.37 3.63 5.58
14.4 11.5 12.5 8.12 4.6 5.9
14.4 11.5 13.75 8.62 3.63 5.58
9.0 8.75 11.5 6.87 3.63 5.58
14.4 11.5 12.5 7.62 4.6 7.2
14.4 11.5 15 8.62 4.6 7.2
Selection Table RLW Reactor Ancillary Information
2.00
1.50
1.00
0.50
0.00
-0.50
-1.00
-1.50
-2.00
AC Voltage Spike
900
800
700
600
500
Typical Trip Level
3% Reactor
No Reactor
DC Bus Voltage
Without Reactor
With Reactor
MTE RLW Reactor with standard mounting compared to RL with same ratings (on left), and RLW reactor with optional adapter plate mounting bracket compared to RL reactor with same ratings (on right)
Without Reactor With 5% Impedance Reactor
MTE RLW Reactors connection terminals vary in size by model & rating
The Global Power Quality Resource
MTE Corporation - Menomonee Falls, WI - 1-800-455-4MTE - www.mtecorp.com
Product Specifications - MTE RLW Reactors
Refer to the RLW Reactor User Manual for Detailed Specifications
Standard Impedance Levels:
Impedance Basis Calculation:
Service Factor (continuous):
Overload Rating - Line Side:
System Voltage:
Switching Frequency:
Insulation System:
Temperature Rise:
Ambient Temperature
Altitude (Maximum):
-40 to 90º C Storage
1000 meters
Fundamental Frequency (de-rate above 60Hz): 50/60 Hz
Inductance Tolerance:
Inductance Curve (Typical):
Dielectric Strength:
Maximum Audible Level at Two (2) Meters:
Approvals:
1.5% - Minimum impedance for reduction of low level voltage transients. RLW reactors may be used as a supplement to already installed reactors.
3.0% - Helps minimize (95%) most drive nuisance tripping and faults caused by over-voltage and input line disturbances.
5.0% - MTE recommended value to protect drive components from transient over-voltage, prevents (99.9%) nuisance trips and offers limited harmonic protection to input line power from drive induced harmonics.
% Z= (I/V) x 2πfL √3 x 100
100%
150% of RMS rating for 1 minute
200% of RMS rating for 10 seconds
Up to 690 Volts
Maximum - 20 kHz
Minimum - 1 kHz
200º C
140º C (average)
Full Load:
-40 to 50º C Open
+/- 10%
100% at 100% current
80% at 150% current
50% at 200% current MTE RLW Product Family
4000 volts RMS (2200 volts peak repetitive)
Line applications: 65 dBa
Load applications: 76 dBa
CE, UL-508, Type RL cUL per CSA C22.2
Note: Short Circuit rating not required under Exception No.1 of UL508A SB4.2.1 effective 4/25/06
DIN Rail Mount: 2 spring steel screw mounts for 35mm rail with 10-32 screws
100
90
80
70
60
50
40
30
20
10
0
50 100
RLW Inductance Curve
150
% Rated Current
200 250
Altitude Derating Curve
1.05
1.00
0.95
0.90
0.85
0.80
0.75
0.70
0 3300 6600 9900
Altitude (Feet)
13200 16500
RLW-008305
Form RLW-6page-09-ph3
For Technical Support: [email protected]
For Sales Support: [email protected]
World Headquarters
N83 W13330 Leon Road
Menomonee Falls
Wisconsin 53051
Toll Free 1-800-455-4MTE
Phone: (262) 253-8200
Fax: (262) 253-8222
Visit us on the Web at: www.mtecorp.com
®
© 2009 MTE Corporation
All Rights Reserved
The Global Power Quality Resource
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement