advertisement
▼
Scroll to page 2
30 meter Infra-Red Camera –CAM-IR338 1. Packet Content CAM-IR338 Screw kit x 1 Rack x 1 Quick Installation Guide x 1 –1– 2. Installation –2– 3. Specification 1. Please fix the CAM-IR338 to a suitable location with the Rack and Screws. Image Pick-up Device SONY 1/3“ Color CCD 2. Adjust the camera to the correct direction. Effective Picture Elements NTSC: 510 x 492, PAL: 500 x 582 (H x V) 3. Connect Video Output connector to your DVR. Horizontal Resolution 380 horizontal TV lines 4. Connect a DC 12V power adapter to the Power Input connector. Minimum Illumination 0 LUX with built-in IR-LED S/N Ratio More than 48 dB Auto Electronic Shutter NTSC: 1/60s~1/100,000s, PAL: 1/50s~1/110,000s Gain Control Automatically White Balance Automatically (2500K~9500K) Gamma Characteristic 0.45 Lens Furnished Board Lens 6.0 mm / F2.0 Synchronous System Internal, Negative sync. Video Output 1 Vp-p Composite Video / 75 Ohms. Power Supply 12V DC / 300mA Operating Temp. -10°C to 50°C (14°F to 122°F) Water Resistance IP66 IR LED 30 Units of 850nm IR LED IR Project Distance 30 Meters Dimensions 82mm(φ) x 110mm (L) Note Before connect power adapter to camera, please make sure the power output voltage is DC 12V (max. ±10%). If you can not sure this part, we will suggest to use a DC 12V Switching power adapter. It can provide stable power output. –3– –4–
advertisement
Related manuals
advertisement