Crux AVICH-03 A/V input Integration for Select Jeep Vehicles Owner's Manual

CHRYSLER

2016 300

DODGE

2014 – 2015 Durango

JEEP

2014 – 2015 Grand Cherokee

RAM

2014 – 2016 1500

2014 – 2016 2500

2014 – 2016 3500

NOTES:

1) Not compatible with diesel powered RAM trucks.

- Provides a composite A/V input to the factory radio.

- Includes HDMI to composite adaptor cable for smartphone mirroring.

- Plug and Play Installation

AVICH-03 CAN MODULE AVICH-03 Harness

AVICH-03 VIM MODULE

1 / 3

VCIP5 HDMI Conversion Cable rev.060719

1.

Remove the factory radio from the dashboard and unplug the connectors behind the radio.

2.

Mate the T-Harness connections to the factory connectors. (Make sure all connectors are properly seated into the interface and into the radio.)

3.

On the CAN Module, set DIP switch #4 to ON to enable the AV Input.

4.

Connect the audio and video source to the female RCAs on the AVICH-03 T-Harness.

5.

Switch to the new AV input by pressing the BACK button on the radio or the middle button on the steering wheel controls behind the left side of the steering wheel. (See page 3) (If the radio does not have a BACK button use the GREEN wire option to toggle the AV source by connecting it to

+12V. We recommend using a toggle switch to use this feature.)

6.

Test the system before putting back the radio.

Make sure the DIP#4 is set to the ON position. This sets the programming to the vehicle.

DIP 1 OFF Not Used

DIP 2 OFF Not Used

DIP 3 OFF Not Used

DIP 4 ON AV Input Enable OFF AV Input Disable

DIP 5 OFF CAN Termination Radio Side

DIP 6 OFF CAN Termination Car Side

NOTES:

1. Set DIP#6 to ON if you experience the radio freezing or not responding properly.

2 / 3 rev.060719

SWITCHING TO THE A/V INPUT

Press the BACK button once to switch to the AV source.

On some vehicles, there is a SWC control switch behind the left side if the steering wheel. Press the middle button to switch to the A/V source.

NOTE: If there is no video signal flowing through the

AV input, there will be a BLUE screen present. To exit, simply press the BACK or SWC button again.

8.4” Uconnect Radio (1-Piece Radio)

5” Uconnect Radio (1 -Piece Radio)

3 / 3 rev.060719