EmCORE-a10R2

Form Factor

3.5

" Compact Board

CPU

Soldered onboard AMD

R1102G APU Processor

3.5

" Compact Board

Quick Installation Guide

Version 1.0

Audio

Realtek ALC269 2.1

Channel HD Audio Codec,

Mic-in/ Line-in/ Line-out

Video

Dual Channels 24-bit

DisplayPort

LAN

2 x Realtek RTL8111

PCIe Gigabit Ethernet

I/O

SATA/ USB/ COM/ Minicard/ DIO/ Micro SIM

♦ Technical Support

If you have any technical difficulties, please consult the user’s manual first at: http://arbor-technology.com/

Please do not hesitate to call or e-mail our customer service when you still can not find out the answer.

http://arbor-technology.com/

E-mail: [email protected]

FCC Class A

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions : (1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation.

Copyright ® All Rights Reserved.

4042100200100P

- 1 -

Draft

Packing List

Before you begin installing your Compact Board, please make sure that the following materials have been shipped:

1 x EmCORE-a10R2

AMD Ryzen R1000 R1102G Compact Board

1 x Quick Installation Guide

If any of the above items is damaged or missing, contact your vendor immediately.

Ordering Information

EmCORE-a10R2-1102G AMD Ryzen R1000 R1102G compact board

CBK-08-10R2-00

Cable kit

2 x USB 2.0 cables (1 port/ cable)

3 x COM ports cables

1 x AUDIO cable

2 x SATA cable & power cables

Driver (7.7A) Installation

To install the drivers, please visit our website at www.arbor-technology.com and download the driver pack from the product page.

Device

CHIPSET & VGA

AUDIO

LAN

Driver Path

\CHIPSET\19.50.23.01.200220a-352391C-AES

\CHIPSET\AMD_Software_2.02.24.623

\AUDIO\7982_PG453_Win10_TH_RS_Win8.1_

Win8_Win7_WHQL

\LAN\Install_Win10_10025_03202018

- 2 -

Board Dimensions

142.8

8.8

ø3.2X4PCS

8.8

142.8

146

- 3 -

Draft

Specifications

Form Factor

CPU

Memory

BIOS

Watchdog Timer

Super I/O

USB Port

Serial Port

Expansion

Storage

Ethernet Chipset

Digital I/O

Audio

Graphic Chipset

Graphic Interface

Power Requirement

Power Consumption

Operating Temp.

Operating Humidity

Dimensions (L x W)

3.5" Compact Board

Soldered onboard AMD Ryzen R1102G 1.2GHz (Base)/

2.6GHz (Turbo) Processor

1 x DDR4 SO-DIMM socket, supporting 2400MHz SDRAM up to 16GB

AMI UEFI BIOS

1~255 levels reset

Fintek F81866

2 x USB 3.0/2.0 ports

6 x USB 2.0 ports

6 x COM ports

2 x Mini-Card Sockets (1 x Full size, 1 x Half size)

1 x Micro SIM socket (for Full size Mini-card)

2 x Serial ATA ports with 600MB/s HDD transfer rate

2 x Realtek RTL8111 PCIe GbE controllers

8-bit Programmable

Realtek ® ALC269 2.1 Channel HD Audio CODEC,

MIC-in/ Line-in/ Line-out

Integrated Vega Core Graphics controller

2 x Dual Channel 24-bit LVDS

1 x DisplayPort

Total display: choose two from three

+8V - 13.2V DC-In

1.53A@12V (Typical)

-20 ~ 70°C (-4 ~ 158ºF)

10 ~ 95% @ 70°C (non-condensing)

146 x 102 mm (5.7" x 4.0")

- 4 -

Jumpers and Connectors Location on Top side

(10)USB3 (12)JPWRSW1

(9)USB2 (11)JFRT1 (14)LVDS2 (15)LVDS1  JPWR1

(8)SPK1

(7)DP1

USB1

(6)LAN1

(13)AUDIO1

(27)SIM1

(26)MC2

(25)MC1

 JINV2  JINV1

  

(28)BAT1

(29)JLPC1

(5)LAN2

(4)COM2

(3)COM4

(1)CN1

(2)COM1

(30)DIMM1

(16)SATA1

(17)SATAPWR1

(18)SATA2

(19)SATAPWR2

(20)COM5

(21)COM6

(22)FAN1

(23)PWRIN1

(24)DIO1

- 5 -

Draft

Jumpers & Connectors Quick Reference

Jumpers

Jumper

➊

JPWR1

➋➌

JVLCD1, 2

➍

JBAT1

➎➏

JINV1, 2

Description

AT/ATX Power Mode Selection

LVDS1, 2 LCD Voltage Selection

CMOS Setting

LVDS1, 2 LCD Inverter Voltage Selection

Connectors

Connector

(1)CN1

(2)COM1

(3)COM4

(4)COM2

(5)(6)LAN2, 1

(7)DP1 & USB1

(8)SPK1

(9)(10)USB2, 3

(11)JFRT1

(12)JPWRSW1

(13)AUDIO1

(14)(15) LVDS2, 1

(16)(18)SATA1, 2

(17)(19)SATAPWR1, 2

(20)(21)COM5,6

(22)FAN1

(23)PWRIN1

(24)DIO1

(25)MC1

(26)MC2

(27)SIM1

(28)BAT1

(29)JLPC1

(30)DIMM1

Description

DREWR Connector

RS-232 Serial Port Connector

Serial Port Connector

RS-232 Serial Port Connectors

RJ-45 LAN and USB 2.0 Stack Connectors

USB 3.0 Stack Connectors and DisplayPort

2Watt (rms)/4Ω per Channel Speaker Output Connector

USB Hub

Switches and Indicators

Power Switches and LED

MIC,LINE Audio Connector

LVDS Connector

SATA Connector Channel 0, 1

SATA Power Connector

RS-232 Serial Port Connector

Smart Fan Connector

DC +12V Power Input Connector

Digital I/O Connector

Full size Mini-Card Socket

Half size Mini-Card

MC1 NANO SIM Socket

Battery Connector

LPC to 80 Port Debug Card Connector

DDR4 SO-DIMM Socket

- 6 -

Jumpers

➊ JPWR1: AT/ATX Power Mode Selection

Connector type: 2.00mm pitch 1x3 pin header

Pin Power Mode Selection

1-2

2-3

2-3

1-2

ATX Mode (Default)

AT Mode

+3.3V (Default)

➍ JBAT1: CMOS Setting

Connector type: 2.00mm pitch 1x3-pin header

Pin Mode

Keep CMOS (Default)

3 2

3 2 1

1 2 3

1

3 2 1

➋➌ JVLCD1, 2: LVDS1, 2 LCD Voltage

Selection

The voltage of LVDS1, 2 LCD panel could be selected by JVLCD1 in +5V or +3.3V.

Connector type: 2.00mm pitch 1x3 pin header

Pin Voltage

3 1-2 +5V 2 1

(1)CN1: DREWR Connecter

Connector type: RJ-11 Connector

Pin Description

1 FRAME GND

2 DRWER1

3 SW_IN

4 24V

5 DRWER2

6 GND

6 1

(2)COM1: RS-232 Serial Port Connector

Connector type: 1.25mm pitch 1x9-pin w afer connector

Pin Description

1 DCD

2 RX

3 TX

4 DTR

5 GND

6 no connection

7 RTS

8 CTS

9 +5V/RI (JRS1 Switchable)

1

1 2 3 2-3 Clear CMOS

➎➏ JINV1, 2: LVDS1, 2 LCD Inverter

Voltage Selection

The voltage of LVDS1, 2 LCD panel inverter could be selected by JINV1, 2 in 12V or +5V.

Connector type: 2.00mm pitch 1×3 pin header

Pin Voltage

3 2 1 1-2 +12V (default)

2-3 +5V

3 2 1

(3)COM4: Serial Port Connector

Connector type: 8-Pin mini DIN connector

Pin Description

1 CTS

2 RTS

3 RXD

4 GND

5 TXD

6 DSR

7 DTR

8 +V5S

8 7 6

5

2

4

1

3

- 7 -

Draft

(4) COM2: RS-232 Serial Port Connector

Connector type: External 9-pin D-sub male connector.

Pin Desc.

1 DCD

2

3

RX

TX

4

5

DTR

GND

Pin Desc.

6 DSR

7

8

9

RTS

CTS

+5V

1

6 9

5

(11)JFRT1: Switches and Indicators

Connector type: 2.00mm pitch 2x4 pin wafer connector

Pin Desc.

2

4

POWER_

LED-

HDD_LED-

6

8

12V_-

RESET-

Pin Desc.

1

3

POWER_

LED+

HDD_LED+

5

7

12V_+

RESET+

8

1

Connector type: RJ-45 LAN and double-stacked USB connectors

The pin assignments conform to the industry standard.

(12)JPWRSW1: Power Switches and LED

Connector type: 1.25mm pitch 1x4 pin wafer connector

Pin Description

1 PSON+

2 PSON-

3 POWER_LED2+

4 POWER_LED2-

(7)DP1 & USB1: USB 3.0 Stack Con -

Connector type: Double-stacked USB connectors and

DisplayPort

The pin assignments conform to the industry standard.

(13)AUDIO1: MIC,LINE Audio connector

Connector type: 1.25mm pitch 1x5 pin connector

Pin Description

1 MIC

2 GND

3 LINE IN L

4 LINE IN R

5 GND

Speaker Output Connector

Connector type: 1.25mm pitch 1x4 pin header

Pin Description

1

2

3

4

SP_R-

SP_R+

SP_L-

SP_L+

(9)(10)USB2, 3: USB Hub Connector

Connector type: 1.25mm pitch 1x5 pin header

Pin Description

3

4

1

2

5

USB_+5V

USB-

USB+

GND

GND

1

- 8 -

(14)(15) LVDS2, 1: LVDS Connector

Connector type: 1.25mm pitch 2x20 pin connector, supporting 24-bit dual channels

Pin Description Pin Description

Channel 0, 1

Connector type: SATA Connector

The pin assignments conform to the industry standard.

1

7

3 GND

5 LVDS_DA0-

7 LVDS_DA0+

9 GND

11 LVDS_DA1-

13 LVDS_DA1+

15 GND

17 LVDS_DA2-

19 LVDS_DA2+

21 GND

23 LVDS_A_CLK-

25 LVDS_A_CLK+

27 GND

29 LVDS_DA3-

31 LVDS_DA3+

33 GND

35

37

USB+ (USB2.0

PORT4)

USB-(USB2.0

PORT4)

39 USB_+5V

6 LVDS_DB0-

8 LVDS_DB0+

10 GND

12 LVDS_DB1-

14 LVDS_DB1+

16 GND

18 LVDS_DB2-

1

20 LVDS_DB2+

22 GND

24 LVDS_B_CLK-

26 LVDS_B_CLK+

28 GND

30 LVDS_DB3-

32 LVDS_DB3+

34 BKL_CONTROL

39

36 BKL_ENABLE

38 GND

40

(17)(19)SATAPWR1, 2: SATA Power

Connector

Connector type: 2.00mm pitch 1x2-pin wafer connector

Pin Description

1

1 +5VS

2 GND

(20)(21)COM5,6: RS-232 Serial Port

Connector

Connector type: 1.25mm pitch 1x9-pin w afer connector

Pin Description

1 DCD

2 RX

3 TX

4 DTR

5 GND

6 DSR

7 RTS

8 CTS

9 COM5: RI / COM6: +V5S

1

(22) FAN1: Smart Fan Connector

Connector type: 1.25mm pitch 1x3-pin wafer connector

Pin Description

1 GND

1

3

2 VCC

3 RPM

- 9 -

Draft

Connector

Connector type: 2.5mm pitch 1x8 pin header

Pin Description

1 VIN: 8V~13.2V

1

2 VIN: 8V~13.2V

3 GND

4 GND

5 +5V LED

6 COM1 DSR

7 GND

8 VIN:+24V

8

(24)DIO1 : Digital I/O Connector

Connector type: 2.00mm pitch 2x5 pin wafer connector

Pin Desc.

2 DIO1

Pin Desc.

1 DIO0

2

4 DIO3

6 DIO5

8 DIO7

10 GND

3 DIO2

5 DIO4

7 DIO6

9 V5S+

10 9

1

(25)MC1: Full size Mini-Card Socket

(26)MC2: Half size Mini-Card Socket

Connector type: Onboard 0.8mm-pitch 52-pin edge card connector

The pin assignments conform to the industry standard.

52 51 52 51

18

16

15

17

2 1

MC2

18

16

15

17

2 1

MC1

(27)SIM1: MC1 NANO SIM Socket

Connector type: SMD,6P,1.27mm, H1.5 socket

Pin Desc.

C1 VCC

C3 CLK

C6 VPP

Pin Desc.

C2 RST

C5 GND

C7 I/O

C5 C6 C7

SW C1 C2 C3

(28)BAT1: Battery Connector

Connector type: 1.25mm pitch 1x2-pin connector.

Pin Description

1

2

RTCBAT

GND

1

2

(29)JLPC1: LPC to 80 Port Debug Card

Connector

Connector type: 1.25mm pitch 2x5 pin header

Pin Desc.

Pin Desc.

1 LPC_CLK0 2 GND

3 LPC_

LFRAME#

5 PLTRST#

4 3.3V_LPC_

LAD0

6 N/C

7 LPC_LAD3 8 LPC_LAD2

9 +3.3VS

10 LPC_LAD1

1 2

9 10

(30)DIMM1: DDR4 SO-DIMM Socket

Connector type: DDR4 SO-DIMM socket supporting

2400MHz SDRAM up to 16GB

1

2

DIMM1

203

204

- 10 -