advertisement
NOTE:
IF PoE IS USED, MAKE SURE PSE IS IN USE IN THE NETWORK.
NOTE:
IN SOME CASES, AN ETHERNET CROSSOVER CABLE MAY BE NEEDED WHEN
CONNECTING THE CAMERA DIRECTLY TO THE PC.
CHECK THE STATUS OF THE POWER AND THE NETWORK ACTIVITY INDICATOR
LEDS. IF A LED IS UNLIT, CHECK THE CORRESPONDING CONNECTION.
FD920
3MP fixed dome, 3-9 mm motorized, H.265/H.264/MJPEG, SFP
Quick Start Guide
Unpack
Note 1 : Subject to modification. Actual product and accessories may differ in appearance.
Connectors and reset button microSD card slot
Composite video out
Reset button
© Siqura B.V. 2018
Version 1.02 (182711-2)
FD920 QSG
NOTE:
IT IS NOT RECOMMENDED TO CONTINUOUSLY (24/7) RECORD ON THE MICRO
SD CARD, AS THE CARD MAY NOT SUPPORT LONG-TERM CONTINOUS DATA
READ/WRITE. CONTACT THE MANUFACTURER OF THE MICRO SD CARD FOR
INFORMATION ABOUT THE CARD’S RELIABILITY AND LIFE EXPECTANCY.
Find the latest information, firmware and documentation at: siqura.com
Installation notices
CAUTION:
INSTALLATION SHALL BE PERFORMED BY QUALIFIED PERSONNEL
ONLY.
CONNECT POE TO UNEXPOSED NETWORKS.
INSTALLATION SHALL BE IN ACCORDANCE WITH LOCAL
PROCEDURES.
THE CAMERA CONTAINS IRREPLACEBLE BATTERIES, DISPOSE OF
THE CAMERA IN ACCORDANCE WITH LOCAL REGULATIONS.
IF YOU USE AN EXTERNAL POWER SUPPLY, CONTACT SIQURA TO
MAKE SURE THAT THE POWER SUPPLY HAS THE PROPER POWER
SPECIFICATIONS.
Camera mounting
Use the cable gland for
IP66/67 wiring
Mount the camera on a hard surface with the delivered screws. The surface shall be able to hold at least 5 kg
Empty SFP cage.
Slide-in required
SFP
Connectors
Audio and I/O
12Vdc power in
Figure 1 Camera connectors
Accessing the camera
24Vac power in siqura.com
Auto-detect with SDM2
Set OCX Protocol
1 st time camera login
1
Admin
1234
2
Set a strong password
Using the Web Viewer
If the IE web interface is not showing video you might need to open your firewall or set the OCX protocol to RTP-over-RTSP(TCP)
Install browser-based viewer
3
4
advertisement
Related manuals
advertisement