User`s Manual Operations Manual OPERATIONS MANUAL

Add to my manuals
90 Pages

advertisement

User`s Manual Operations Manual OPERATIONS MANUAL | Manualzz

Messenger 2 Transmitter Enhanced

-

SDI Version

M2TE-S

OPERATIONS MANUAL

100-M0171X2 1 of 90

Cobham Tactical Communications and Surveillance

1916 Palomar Oaks Way, Suite 100, Carlsbad, CA 92008

Tel: 760-496-0055

FAX: 760-496-0057

GMS Inc. doing business as Cobham Tactical Communications and Surveillance

www.cobham.com/tcs

Table of Contents

1. Important Warning and General Safety Information ................................................................................................. 7

 

1.1 General ...........................................................................................................................................................................................................7

 

2. Acronyms .................................................................................................................................................................................................... 9

 

3. Introduction .......................................................................................................................................................................................... 10

 

3.1 About the Manual .................................................................................................................................................................................. 10

 

3.2 Warranty .................................................................................................................................................................................................... 10

 

3.3 Safe Operating Procedures ............................................................................................................................................................... 10

 

4. General System Information ..................................................................................................................................................... 11

 

4.1 Overview .................................................................................................................................................................................................... 11

 

4.2 Video Quality and 2K or 4K Transmission.................................................................................................................................. 15

 

5. Hardware Overview ........................................................................................................................................................................... 17

 

5.1 M2TE-S Connectors ............................................................................................................................................................................. 17  

5.1.1 RF Output, Ant Port ...................................................................................................................................................................... 17  

5.1.2 ASI Out .............................................................................................................................................................................................. 18

 

5.1.3 SD/HD SDI IN/ASI IN/COMPOSITE ..................................................................................................................................... 18  

5.1.4 DC IN .................................................................................................................................................................................................. 18

 

5.1.5 I/O – CONTROL .............................................................................................................................................................................. 18  

5.2 Analog Audio Input Configurations .............................................................................................................................................. 20  

6. Local Control Panel Operation .................................................................................................................................................. 22

 

6.1 Local Control Panel Introduction ................................................................................................................................................... 22

 

6.2 Local Control Panel Physical layout .............................................................................................................................................. 22

 

6.3 Power-up Sequence .............................................................................................................................................................................. 23

 

6.4 Numbered LEDs ...................................................................................................................................................................................... 24

 

6.5 Key Pads ..................................................................................................................................................................................................... 26  

6.5.1 “MODE” Key Pad ............................................................................................................................................................................ 26

 

6.5.2 Arrow Key Pads “ ↑↓←→” ...................................................................................................................................................... 26

 

6.5.3 Enter Key Pad “ ENTR“ ................................................................................................................................................................. 26

 

6.6 Modes.......................................................................................................................................................................................................... 27  

6.6.1 Configuration Groups (CFG GRPS LED) Operation ........................................................................................................ 27  

6.6.2 RF LEVEL (Green LED) ................................................................................................................................................................. 28

 

6.6.3 AUDIO (Green LED) ..................................................................................................................................................................... 28  

6.6.4 ENCRYPTION (THE “KEY” Yellow LED) .................................................................................................................. 29

 

6.6.5 REPORT (Green LED) .................................................................................................................................................................... 30  

6.7 Status LED’s .............................................................................................................................................................................................. 31  

6.7.1 RF ON .................................................................................................................................................................................................. 31  

6.7.2 INPUT ................................................................................................................................................................................................. 31

 

6.7.3 MIC ...................................................................................................................................................................................................... 32  

6.7.4 4k Operation ................................................................................................................................................................................... 32

 

6.7.5 ENCRYPTION (THE “KEY” ) ......................................................................................................................................... 32  

100-M0171X2 2 of 90

GMS Inc. doing business as Cobham Tactical Communications and Surveillance

www.cobham.com/tcs

6.7.6 ERROR ................................................................................................................................................................................................. 32  

6.8 Locking the local control panel interface (Future Feature) .............................................................................................. 33

 

6.8.1 Setup lock ......................................................................................................................................................................................... 33  

6.8.2 Locked Modes ................................................................................................................................................................................ 33  

7. Software Overview ............................................................................................................................................................................ 35

 

7.1 Product Control & Status Monitoring Approach .................................................................................................................... 35  

7.2 M2TE Web Interface ........................................................................................................................................................................... 35  

7.3 Account Management ........................................................................................................................................................................ 36

 

7.4 Internet Connection ............................................................................................................................................................................ 36

 

7.5 Group Configurations .......................................................................................................................................................................... 41

 

7.5.1 Individual Configuration Group Setup ............................................................................................................................... 42

 

7.5.2 Configuration Groups File Import ........................................................................................................................................ 53  

7.5.3 Configuration Groups File Export ......................................................................................................................................... 54

 

7.5.4 Restoration of Default Groups ............................................................................................................................................... 54  

7.6 Status ........................................................................................................................................................................................................... 55  

7.7 System Setup ........................................................................................................................................................................................... 56  

7.7.1 RF Power ........................................................................................................................................................................................... 56  

7.7.2 Encryption ........................................................................................................................................................................................ 57

 

7.7.3 Control Panel .................................................................................................................................................................................. 59  

7.7.4 Network ............................................................................................................................................................................................. 59

 

7.7.5 Serial Port ......................................................................................................................................................................................... 61

 

7.7.6 Logon Update ................................................................................................................................................................................. 61  

7.8 System Upgrade ..................................................................................................................................................................................... 62  

7.8.1 Firmware Upgrade ........................................................................................................................................................................ 62  

7.8.2 Optional Features ......................................................................................................................................................................... 65

 

7.9 Help .............................................................................................................................................................................................................. 66

 

8. Initial Checkout .................................................................................................................................................................................. 68

 

8.1 Getting Started ....................................................................................................................................................................................... 68  

9. Specifications ....................................................................................................................................................................................... 70

 

List of Tables

Table 1 – Recommended 1.0/2.3 3G mating connector .................................................................................................................. 18  

Table 2 – Recommended 1.0/2.3 3G mating connector .................................................................................................................. 18

 

Table 3 – Recommended DC IN mating connector ........................................................................................................................... 18  

Table 4 – Recommended VHDCI mating connector with Cable .................................................................................................. 19

 

Table 5 – I/O - Control VHDCI-68 Connector Pin Out ...................................................................................................................... 19  

Table 6 - Audio Configurations..................................................................................................................................................................... 21

 

Table 7 - Report Error Table ........................................................................................................................................................................... 30  

100-M0171X2 3 of 90

GMS Inc. doing business as Cobham Tactical Communications and Surveillance

www.cobham.com/tcs

List of Figures

Figure 1 – M2TE-S Connectors..................................................................................................................................................................... 17  

Figure 2 - M2TE control panel ...................................................................................................................................................................... 23

 

Figure 3 - Numbered LED’s .............................................................................................................................................................................. 24  

Figure 4 - Alphanumeric Characters Displayed on Numbered LED’s .......................................................................................... 25

 

Figure 5 - Key Pads ............................................................................................................................................................................................. 26  

Figure 6 - “MODES” LED’s ................................................................................................................................................................................ 27

 

Figure 7 - “STATUS” LED’s ............................................................................................................................................................................... 31  

Figure 8 – M2TE serial port connection configuration ..................................................................................................................... 38  

Figure 9 – Web interface welcome page ................................................................................................................................................. 40

 

Figure 10 – Login window ............................................................................................................................................................................... 40  

Figure 11 – Web interface main page ....................................................................................................................................................... 41

 

Figure 12 – Individual group configuration page (RF Tab) ............................................................................................................. 42  

Figure 13 - Individual group configuration page (Video Tab) ....................................................................................................... 45

 

Figure 14 - Individual group configuration page (Audio Tab) ....................................................................................................... 46  

Figure 15 - Individual group configuration page (TS Tab) .............................................................................................................. 47

 

Figure 16 - Individual group configuration page (Encryption Tab) ............................................................................................ 48  

Figure 17 - Individual group configuration page (Auxiliary Data Tab) ...................................................................................... 49

 

Figure 18 - Individual group configuration page (Streaming-In Tab) ........................................................................................ 50  

Figure 19 - Individual group configuration page (Streaming-Out Tab) .................................................................................... 51  

Figure 20 – Multi-group configuration file import .............................................................................................................................. 53

 

Figure 21 – Multi-group configuration file export through Mozilla Firefox ........................................................................... 54  

Figure 22 – Restore Default Groups Page ................................................................................................................................................ 55

 

Figure 23 – M2TE Status page ...................................................................................................................................................................... 56  

Figure 24 – M2TE RF Power Configuration page ................................................................................................................................. 57

 

Figure 25 – M2TE Encryption Configuration page ............................................................................................................................. 58  

Figure 26 – M2TE Control Panel Configuration page ........................................................................................................................ 59

 

Figure 27 – M2TE Network Configuration page .................................................................................................................................. 60  

Figure 28 – M2TE Serial Port Configuration page ............................................................................................................................... 61

 

Figure 29 – M2TE Logon Update page ..................................................................................................................................................... 62  

Figure 30 - M2TE DSP firmware upgrade page ..................................................................................................................................... 63  

Figure 31 – M2TE Xilinx firmware upgrade page ................................................................................................................................. 65  

Figure 32 – M2TE optional feature page ................................................................................................................................................. 66  

Figure 33 – M2TE Help page ......................................................................................................................................................................... 67

 

Figure 34 – Basic M2TE Link Setup ............................................................................................................................................................. 68  

Figure 35 - Windows Start Button .............................................................................................................................................................. 75

 

Figure 36 - Control Panel ................................................................................................................................................................................. 76  

Figure 37 - Network Center ............................................................................................................................................................................ 77

 

Figure 38 - Network Connections ............................................................................................................................................................... 78  

Figure 39 - LAN Properties .............................................................................................................................................................................. 79

 

Figure 40 - TCP/IPv4 Properties ................................................................................................................................................................... 80  

Figure 41 - Static IP Address .......................................................................................................................................................................... 81  

100-M0171X2

GMS Inc. doing business as Cobham Tactical Communications and Surveillance

4 of 90

www.cobham.com/tcs

List of Appendices

Appendix A - IP Static Addressing and Interfacing to a Personal Computer .............................................. 74

 

A.1. Static .......................................................................................................................................................................................................... 74  

A.2. DHCP (Dynamic Host Configuration Protocol) ...................................................................................................................... 82  

Appendix B - Cable, M2T External Breakout Cables ....................................................................................................... 83

 

Appendix C - Factory Default Set-up Groups ...................................................................................................................... 85

 

100-M0171X2

GMS Inc. doing business as Cobham Tactical Communications and Surveillance

5 of 90

www.cobham.com/tcs

Revision History

Revision

X1

Date Main Changes from Previous version

2 Sept 2011 Initial Release

X1A 12 Dec 2011

Add Appendix (A) – IP Static Addressing , Interfacing to a Personal Computer

X2 18 April 2012

Add operational description of new FW (DSP 2.0 w

Xilinx 5) release where applicable.

Edited by Checked

TGM

TG

TG

100-M0171X2

GMS Inc. doing business as Cobham Tactical Communications and Surveillance

6 of 90

www.cobham.com/tcs

1. Important Warning and General Safety Information

1.1 General

The following information is presented to the operator to ensure awareness of potential harmful RF

(radio frequency) exposure and general hazards. With regards to potential harmful RF electromagnetic fields the text below is only a brief summary highlighting the possible risks and how to minimize exposure. The summary is based on OET Bulletin 65 “Evaluating Compliance with FCC

Guidelines for Human Exposure to Radiofrequency Electromagnetic Fields” (1). The user should carefully read and comprehend the following before operating the equipment and for additional in depth information refer to OET Bulletin 65.

1. FCC has set guidelines

(1)

for evaluating exposure to RF emissions that the user must be aware of when operating the M2TE microwave transmitter. The maximum power density allowed from

1.7-7.0GHz is

5mW/cm

2

for occupational/controlled exposure* and

1mW/cm

2

for general population/uncontrolled exposure**. These are the limits for maximum permissible exposure

(MPE) as called out in the FCC guidelines (for the above mentioned frequencies).

2. Exposure is based upon the average time spent within the RF field with a given intensity (field units in mW/cm

2

). Hence it may be controlled (or at least minimized) by observing the safe distances and time exposed. Safe distances are calculated from equations predicting RF Fields

(3)

.

3. The transmitter is a mobile device, is rated at 0.2W (+23dBm) RF power and is capable of harmful radiation if safe operating practices are not observed.

4. Antenna minimum safe operating distance is

20cm

(8inches) when using a 2dB Omni antenna. It is the responsibility of the qualified end-user of this intentional radiator to control the save distances and exposure limits to bystanders.

*”Occupational/controlled exposure limits apply to situations in which persons are exposed as a consequence of

their employment and in which those persons who are exposed have been made fully aware of the potential for exposure and can exercise control over their exposure. Occupational/controlled exposure limits also apply where exposure is of a transient nature as a result of incidental passage through a location where exposure levels may be above general population/uncontrolled limits (see below), as long as the exposed person has been made fully aware of the potential for exposure and can exercise control over his or her exposure by leaving the area or by some other appropriate means……..”

(2)

** “General population/uncontrolled exposure limits apply to situations in which the general public may be

exposed or in which persons who are exposed as a consequence of their employment may not be made fully aware of the potential for exposure or cannot exercise control over their exposure. Therefore, members of the general public would always be considered under this category when exposure is not employment-related, for example, in the case of a telecommunications tower that exposes persons in a nearby residential area.“

(2)

(1)

OET Bulletin 65, Appendix A Table 1 Limits for MPE http://www.fcc.gov/Bureaus/Engineering_Technology/Documents/bulletins/oet65/oet65.pdf

(2)

OET Bulletin 65, page 9, definitions of types of exposure http://www.fcc.gov/Bureaus/Engineering_Technology/Documents/bulletins/oet65/oet65.pdf

(3)

OET Bulletin 65, page 19, Equations for predicting RF Fields http://www.fcc.gov/Bureaus/Engineering_Technology/Documents/bulletins/oet65/oet65.pdf

100-M0171X2 7 of 90

GMS Inc. doing business as Cobham Tactical Communications and Surveillance

www.cobham.com/tcs

5. Do not substitute any antenna for the one supplied or recommended by the manufacturer. The installer is responsible for ensuring that the proper antenna is installed.

6. It should be noted that this device is an intentional radiator, hence:

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the

user’s authority to operate the equipment.

7. DC power (+12VDC nominal) to the unit should never be applied until the antenna (or other suitable load) has been attached to the device SMA RF output connector. Safe operating procedures must be observed when unit is transmitting into an antenna (see sections 1 &2 above).

8. Electro-Static Discharge (ESD) precautions should be observed as a safe practice.

9. The transmitter will generate considerable heat and is the responsibility of the end user to properly heat sink the device before using.

100-M0171X2

GMS Inc. doing business as Cobham Tactical Communications and Surveillance

8 of 90

www.cobham.com/tcs

2. Acronyms

This section lists and describes the various acronyms used in this document.

Name Meaning

16 QAM

64 QAM

A/V

AES

16-state Quadrature Amplitude Modulation

64-state Quadrature Amplitude Modulation

Audio/Video

Advanced Encryption System (32 bit)

ASI Asynchronous Serial Interface

BDC or BDCC Block down converter

COFDM

CVBS/Y

Coded Orthogonal Frequency Division Multiplexing

Composite video/Luminance with S-video

C Chroma video

D/C Down-Converter

FEC

GUI

HD

Forward Error Correction

Graphical User Interface

High Definition

Kbaud

Kbps

Mbps

Kilobaud per second

Kilobits per second

Megabits per second

MPEG

MSR

M2D

M2TE

M2L

NTSC

PAL

QPSK

Moving Picture Experts Group

Messenger Smart Receiver

Messenger Two Decoder

Messenger Two Transmitter Enhanced

Messenger Two Link

National Television System Committee

Phase Alternation Line

Quadrature Phase Shift Keying

RF Radio Frequency

RX Receiver

S/N

THD

Signal-to-Noise Ratio

Total Harmonic Distortion

SD

SDI

TX

VDC

100-M0171X2

Standard Definition

Serial Digital Interface

Transmitter

Volts (Direct Current)

GMS Inc. doing business as Cobham Tactical Communications and Surveillance

9 of 90

www.cobham.com/tcs

3. Introduction

3.1 About the Manual

Cobham User Manuals focus on providing the end user an easy to understand operational instructions to quickly setup and deploy the equipment. The Cobham Technical Operation Manuals focus on the technical details and setup of the equipment. The Technical Manuals also provide a more in depth explanation of the settings and specifications of the equipment that technicians can use to verify the operational status.

3.2 Warranty

Cobham offers a 12 month standard product warranty. During this period, should the customer encounter a fault with the equipment we recommend the following course of action:

 Check the support section of the website for information on that product and any software/firmware upgrades.

 If fault persists call our support line and report the fault. If fault persists and you are informed to return the product, please obtain an RMA number from the Cobham support department or website and ship the equipment with the RMA number displayed and a description of the fault. Please email the support section the airway bill/consignment number for tracking purposes.

Depending on the nature of the fault, Cobham endeavor to repair the equipment and return it to the customer within 14 days of the item arriving at our workshops. Obviously it is impossible to cater for all types of faults and to manage 100% replacement part availability, and delays are sometimes inevitable.

Please contact Cobham for details of packages that can be tailored to meet your individual needs, whether they are service availability, technical training, local geographic support or dedicated spares holdings.

3.3 Safe Operating Procedures

 Ensure that the power supply arrangements are adequate to meet the requirements of this product.

 Operate within the environmental limits specified for the product.

 This product requires external cooling to stay within its operating limits. Be sure to use an adequate heat sink.

 Only authorized, trained personnel should open the product. There are no functions that required the User to gain access to the interior of the product.

Warning: Opening this product will void its warranty!

100-M0171X2

GMS Inc. doing business as Cobham Tactical Communications and Surveillance

10 of 90

www.cobham.com/tcs

4. General System Information

4.1 Overview

The Messenger 2 Transmitter Enhanced (M2TE) is a second generation AVC HD/SD COFDM transmitter that combines all the features and capabilities of Cobham Surveillance’s (CS’s) Messenger 2 AVC HD/SD

Transmitter with the additional features listed in the Key System Features section below. All of this is included in a smaller housing (8.6 cu inches). Key features include optional Dual Audio/Video/Data processing with end to end system-level latencies of down to ~44 mS when used with CS

Receiver/Decoders.

The Ultra-low system latency greatly enhances real-time operating when the link is used in time critical situations like piloting Unmanned Aerial Vehicles (UAVs) or Unmanned Ground Vehicles (UGVs) or in threat response. Optional Dual video processing enables 3D content collection which provides depth perception and greater control for UGV applications requiring fine spatial operations like explosive device de-arming. The M2TE’s 3D capability also enhances Entertainment, Sports, and ENG applications.

The M2TE can optionally provide time-correlated KLV-1 and KLV-2 META data processing*

P5

that is used in Airborne Surveillance Applications and Geospatial determination. The META data can be extracted from the SDI/HD-SDI video’s ancillary data space or input on a separate RS-422 interface.

The M2 Series “Messenger Two Series” product line incorporated AVC / H.264 compression technology with ultra-low delay that covers all the SD and HD formats up to 1080P. AVC compression provides dramatically increased compression efficiency over MPEG-2 which allows our link to provide superior coverage over a wider operating range!

There are two core hardware configurations for M2TE. The SDI/HD-SDI configuration accepts up to two

Standard Definition (SD) or High Definition (HD) 4:2:2 Digital Video (SDI/HD SDI) or analog composite

Video and Analog Stereo Audio Inputs (Mic or Line Level) and/or optional Embedded Audio up to a total of two stereo pairs or four mono channels sets or one stereo pair or two mono channels per program.

Mic bias is also provided. In the HDMI configuration*

P3

, the SDI/HD-SDI interfaces are replaced with two

HDMI interfaces that accept both digital video and audio. Dual SD Composite Video inputs are also provided with the HDMI configuration.

Both Video programs can be compressed according to the Advanced Video Compression (AVC) / H.264

(HD/SD) specification with the same or different frame resolutions, rates and formats. The low-latency

AVC Encoder supports the Baseline Profile with extensions with resolutions from 480 to 1080 with support for either interlaced or progressive formats. The Audio is compressed using MPEG-1 Layer 2 compression. Low rate Auxiliary data up to 115 KBaud can be optionally supported. Both programs

Audio, Video and Auxiliary Data Packets PES Streams are multiplexed with Basic Service Data to indicate their respective Service Names. If two programs are active, the two transport streams are multiplexed into a single multi-program stream. The stream can be optionally scrambled with AES scrambling system to provide protection in sensitive applications. User selections for all transport stream ID numbers and service names are provided.

The M2TE is a complete system with Audio/Video encoders/compressors and all the required processing to transmit the modulated signal with up to 200mW of RF over a wide variety of RF bands. External

100-M0171X2

GMS Inc. doing business as Cobham Tactical Communications and Surveillance

11 of 90

www.cobham.com/tcs

Power Amplifiers are available to boost the signal to up to 15W (band dependent). CS’ COFDM wireless equipment provides standard a robust digital modulation system known as Coded Orthogonal Frequency

Division Multiplexed (COFDM) that provides frequency diversity and powerful Forward Error Correction

(FEC) algorithms. This modulation is ideas for transmitting over water or into urban environments which typically have high multi-path interference. Product development plans include the ability to switch via a command to single carrier modulations for Line of Sight (LOS) applications and compatibility with other surveillance systems.

Our Messenger Receivers include an option for Spatial Maximal Ratio Pre-Detect Diversity Combining to combat multipath reflections found in indoor/urban environments. CS’ Messenger six or eight channel receivers with associated Messenger Antenna Arrays (MAAs) provide wide reception range without the hassle and cost of an auto tracking antenna system. The Messenger series Tx/Rx products provide a robust wireless link that is effective against the multipath interference experienced by analog systems and provides reliable data transmission in the most difficult of terrains.

LAN/IP Port

The M2TE contain a 10/100BaseT LAN interface that can be used both for Control & Status monitoring and for Transport Stream (TS) streaming in and out of the device. The IP address can be assigned automatically via a DHCP server or via manual settings. Control & Status monitoring is accomplished via

100-M0171X2

GMS Inc. doing business as Cobham Tactical Communications and Surveillance

12 of 90

www.cobham.com/tcs

a WEB browser application that launches from the device. TSs can be sent out or in via UDP/IP or

RTP/UDP/IP protocols.

3D Support

3D is a very new area in the Broadcast industry. From a content collection standpoint it is normally accomplished with two separate cameras that are GEN-LOCKED together outputting two separate Video signals.

Content Collection Format

The encoder maintains a frame by frame synchronization as it goes through its processing.

AES Scrambling

The AES Scrambling option can be used to add security to your data transmission. The system scrambles the payload portion of the TS packets. Only the TS header remains unscrambled to enable operation with standard DVB-T receivers. The 128 bit-scrambling key is entered through the M2TE’s control interface.

The user can enable or disable the scrambling as well as choosing if the key is stored within the Tx or not via CS’ Microsoft Windows control program. Encryption on/off is also available from the local control panel (if it was previously turned ON).

Local Control Panel

The M2TE includes a simple local control panel that allows the selection of up to 20 set-up configurations, Encryption Enable/Disable, switch between Mic and Line Level inputs and selection of 4 output power levels. Status indicators are provided for the presence of input Audio, Video and RF output. Each of these set-up configurations can independently control every programmable parameter in the TX including RF Frequency, Modulation Mode, Compression Modes and Video Resolution to name a few. These Set-Up Groups can be configured by Administrative Personnel using the CS M.S. Window’s

Control Application prior to fielding the equipment.

This manual provides information on how to operate the M2T-E as well as pertinent technical information related to the overall system. Refer to the model identifier (on-line document, 100-

MNI0115 - latest revision) at the Cobham website, http://www.cobham.com/gms , for available frequency and power configurations along with options.

Notes

* When used in Ultra-Low Latency mode (Intra-Refresh) with Cobham NA Messenger 2 Decoders and Receiver Decoders.

** With 4K High-Throughput Option on M2TE or Encoder Mode

100-M0171X2 13 of 90

GMS Inc. doing business as Cobham Tactical Communications and Surveillance

www.cobham.com/tcs

*** Latency Delay is Decoder dependent

**** Frequency Band Dependent

*

P3

*

P4

Development Phase 3 Implementation

Development Phase 4 Implementation

Key System Features

*

P5

*

P6

Development Phase 5 Implementation

Development Phase 6 Implementation

Ultra-Low End to End System Latency (down to ~44 mS)*

AVC HD/SD Encoder (Up to 1080p 60FPS)

Supports Dual Audio/Video/Data programs (Option) o Multi-Camera Support o 3D Support

COFDM Modulation (DVB-T 2 K or *4 K Carriers)

Bandwidths DVB-T 6,7,& 8 MHz (STD) & 12, 14 & 16 MHz (4 K*)

Output Frequency: 0.9 to 7 GHz (In-Bands)

Dual L/S Band Capability

Dual 3Gbps HD-SDI/SDI and Analog SD Video Input Interfaces Option

Dual HDMI & and Analog SD Video Input Interfaces Option*

P3

Analog Audio and Embedded Audio

Transport Stream Streaming via LAN or ASI or Serial Interface

Time Correlated KLV Meta Data handling*

P5

Secure – *BCRYPT AES 128/256 Encryption

Control via local panel or remote LAN Web Server or Serial Interface

Signal Processing

The Messenger 2 Transmitter Enhanced (M2TE) series accepts up to two Standard Definition (SD) or

High Definition (HD) 4:2:2 digital videos or analog SD videos and analog stereo audio inputs (Mic or

Line level). Each video is compressed independently according to the Advanced Video Compression

(AVC) /h.264 specifications. Therefore, the video inputs can either the same resolution and frame rate or completely different resolutions and frame rates. The low-latency AVC Encoder supports the

Baseline Profiles with resolutions from 480 to 1080 with support for either interlaced or progressive formats. The audio is compressed using MPEG layer II compression. Low rate Auxiliary data up to

115 KBaud can be optionally supported.

The basic system supplies support for generation of a single audio/video/data program within a

MPEG Transport Steam (TS). The audio, video and auxiliary data packets PES streams are multiplexed with basic service data to indicate the service name. The stream can be scrambled with AES scrambling system to provide protection in sensitive applications.

The dual system option supplies support for generation of two independent audio/video/data programs within a single MPEG Transport Steam (TS). The dual program stream can also be scrambled with AES scrambling system to provide protection in sensitive applications.

The M2TE can operate in one of two modes When the Transmit Mode is enabled the TS will be sent to the COFDM RF transmission processing section. In this mode it can also be streamed out optionally the ASI output port and/or the LAN port for local distribution or recording on external

100-M0171X2

GMS Inc. doing business as Cobham Tactical Communications and Surveillance

14 of 90

www.cobham.com/tcs

devices. The second operating mode is the Encoder-Only Mode. In this mode the COFDM RF transmission chain is disabled and only the ASI and LAN ports are active.

There are two COFDM operating modes available; standard 2K DVB-T compliant and a Cobham unique 4K mode. The 4K mode provided twice the data throughput than 2K mode (2x RF bandwidth) and allows the transmission of high quality dual HD video in a robust 16-QAM format.

COFDM 2K Carrier Mode

In 2K Mode the M2TE uses standard DVB-T coding and modulation. DVB-T stands for Digital Video

Broadcasting — Terrestrial; it is the DVB European-based consortium standard for the broadcast transmission of digital terrestrial television that was first broadcast in the UK in 1997. This system transmits compressed digital audio, video and other data in an MPEG transport stream, using coded orthogonal frequency-division multiplexing (COFDM or OFDM) modulation.

The OFDM scheme works by splitting the digital data stream into a large number of slower digital streams each of which digitally modulate a set of closely spaced adjacent carrier frequencies. COFDM goes a step further by using a “Coding” scheme to map the data onto the multiple carriers in a way that maximizes recovery from link errors. This coding includes Forward Error Correction with

Convolution Interleaves’ and Reed Solomon encoding along with careful distribution of the data onto the multiple carriers. COBHAM CS has chosen to use 2K carrier in which 1,705 carriers actually carry the payload that are approximately 4KHz apart. DVB-T offers three different modulation schemes

(QPSK, 16QAM, 64QAM).

4K Carrier Mode

The 4K HIGH-THROUGHPUT OPTION enables user-selectable options to set bandwidths from 6 MHz to 16 MHz and to double the throughput of our standard M2T (Up to 63 Mbps!). In 2K carrier mode the system would need to operate in 64-QAM to support dual program/video operations. Using 4K carriers and the 16 MHz bandwidth, the link can support dual program/video HD operation using 16

QAM. This increases link robustness and provides an additional 13.5 dB of gain with a link margin increase greater than 4.7 x in operating range! For the same throughput rate in a standard HD MPEG-

2 DVB-T system! With the 4 K HIGH-THROUGHPUT OPTION you can run with fully DVB-T compliant

2K carriers and bandwidths of 6, 7, or 8 MHz. When you switch to 4K carriers you can select 12, 14 or 16 MHz bandwidth.

4.2 Video Quality and 2K or 4K Transmission

The M2TE uses Advanced Coding Standard (AVC) also known as h.264 or MPEG-4 Part 10. It is 30-

40% more compression efficient than MPEG-2 which helps achieve high quality HD or SD video through a standard 2K DVB-T wireless link.

Video quality depends on many complex factors including;

 Video resolution and frame rate

 Single or dual video processing

 Level of detail and contrast

100-M0171X2 15 of 90

GMS Inc. doing business as Cobham Tactical Communications and Surveillance

www.cobham.com/tcs

 Level of motion in the video

 Level of noise in the video

 Existence of repeating patterns in the video

The required level of video quality will not be the same for all applications. Broadcasters often demand high-quality while certain surveillance applications may be satisfied with much less quality.

Since we support a wide variety of applications we allow a wide range of settings. Not every set-up configuration will be acceptable for all applications.

Through experimentation it has been found that a single 1080 resolution HD video at 30 fps can be supported with very good video quality under most video conditions at ~16 Mbps. 720p @60 fps needs ~14 Mbps for similar quality. Simple HD video scenes can be supported at very low bit rates,

4Mbps for example. However, they will degrade rapidly with motion or noise. The M2TE’s factory defaults for single program/video operation are set to the aforementioned levels which can be accomplished with 2K DVB-T transmission using 16-QAM which is reasonably robust in most wireless environments.

The factory defaults for dual program (dual video) with 2K DVB-T run in 64-QAM operation and allocate ~12 Mbps per program/video. At these rates the video will still be good. However, as the videos become more demanding there will be more artifacts. Also, 64-QAM operation will reduce the operating range and robustness of the link.

If you are using a mixture of HD and SD you can allocate more of the data bandwidth to the HD program using the Video Bit Rate Allocation controls in the set-up configuration group parameter.

This parameter allows the user to allocate a percentage of the channel bit rate to program A vs. B.

If you want to get the video quality and range of our single program/video operation with dual HD videos you will need to go to our 4K operation which doubles the throughput of the link. Note that the RF bandwidth is also doubled. However, in this mode you will be able to go back to 16-QAM and have high video quality with reasonable link range and robustness.

100-M0171X2

GMS Inc. doing business as Cobham Tactical Communications and Surveillance

16 of 90

www.cobham.com/tcs

5. Hardware Overview

The basic M2TE-S transmitter configuration is outlined in this section:

Figure 1 – M2TE-S Connectors

5.1 M2TE-S Connectors

There are six connectors located on the M2TE-S unit as shown in Figure 1. They are for interfacing the RF out, SD/HD SDI Video or ASI in or SD Composite in (Two ports), ASI out, audio, Auxiliary Data,

KLV Data, LAN/IP and Control signals. The Local Control panel is also shown in Figure 1.

5.1.1 RF Output, Ant Port

The M2TE uses a female SMA connector for its ‘RF Output’ port. The antenna is normally attached here. This port can also drive additional external amplifiers for high-power applications like Aerial downlinks.

Note: Transmitters should not be powered on without a load attached to the RF output. Doing so could damage the internal Power Amplifier (PA).

100-M0171X2

GMS Inc. doing business as Cobham Tactical Communications and Surveillance

17 of 90

www.cobham.com/tcs

5.1.2 ASI Out

A 75 Ohm female 1.0/2.3 3Gbps connector is provided for DVB-ASI Transport Stream Output.

The output bit rate is 270 Mbps.

Table 1 – Recommended 1.0/2.3 3G mating connector

Manufacturer

Cambridge

5.1.3 SD/HD SDI IN/ASI IN/COMPOSITE

Part Number

XGT-8000-NGAF

Both video input ports use a 75 Ohm female 1.0/2.3 3Gbps connector for SD-SDI or HD-SDI or

SD composite video input streams. The input bit rate is 270 Mbps for SD and 1.485 Gbps to 2.97

Gbps for HD. The Composite SD inputs can support either NTSC or PAL video formats.

In addition these input connectors can be used as an input for ASI DVB compliant Transport

Streams. See section 7, software overview, for details on the Input Modes. This section explains how to switch from SDI IN to ASI IN using the Cobham M2TE Web Configurator.

Table 2 – Recommended 1.0/2.3 3G mating connector

Manufacturer

Cambridge

Part Number

XGT-8000-NGAF

5.1.4 DC IN

The M2TE accepts +9-+32V DC on a 4 position LEMO connector. Pins 1 & 2 connect to +VDC and Pins 3 & 4 connect to GND.

Table 3 – Recommended DC IN mating connector

Manufacturer

LEMO

ODU

Part Number

FGG.0B.304.NLAS2

S10LON-P04MFG0-5200

5.1.5 I/O – CONTROL

The ‘I/O - CONTROL’ connector is a male, high-density VHDCI-68. It is used to provide the interface for audio, Mic Bias, Auxiliary data, KLV data, RS-232, LAN/IP control & streaming, I/O interface.

Normally, the M2TE is controlled via the LAN/IP interface via an internally launched WEB interface. However, it also has two separate RS232 channels/interfaces that can be used one at

100-M0171X2

GMS Inc. doing business as Cobham Tactical Communications and Surveillance

18 of 90

www.cobham.com/tcs

a time for control and monitoring the unit. These same interfaces can be used to send asynchronous low-Rate DATA along with the audio and video.

Table 4 – Recommended VHDCI mating connector with Cable

Manufacturer

MOLEX

Part Number

79918-0080

Table 5 – I/O - Control VHDCI-68 Connector Pin Out

Pin

1

35

2

36

3

37

4

38

5

Signal

GND

GND

RS232 Data RX1

RS232 Data TX1

RS232 Data RX2

RS232 Data TX2

GND

GND

AUDIO 1 DIFF P

48

15

49

16

50

17

45

12

46

13

47

14

51

18

52

42

9

43

10

44

11

39

6

40

7

41

8

100-M0171X2

AUDIO 1 DIFF N

AUDIO 1 BIAS

AUDIO 2 BIAS

AUDIO GND

AUDIO GND

AUDIO 3 BIAS

AUDIO 4 BIAS

AUDIO 2 DIFF P

AUDIO 2 DIFF N

AUDIO GND

AUDIO GND

GND

GND

IO BRD ID0

IO BRD ID1

DSP GPIO1

DSP GPIO0

DSP GPIO2

DSP GPIO3

GND

GND

RS422-A P

RS422-A N

Notes

Digital GND

Digital GND

RS232 Port 1

RS232 Port 1

RS232 Port 2

RS232 Port 2

Digital GND

Digital GND

Positive AUDIO input 1

Negative AUDIO input 1

Microphone 1 Bias Voltage (+1.5 volts)

Microphone 2 Bias Voltage (+1.5 volts)

Factory only use – leave this pin open

Factory only use – leave this pin open

GND for Audio Signals

GND for Audio Signals

Factory only use – leave this pin open

Factory only use – leave this pin open

Microphone 3 Bias Voltage (+1.5 volts)

Microphone 4 Bias Voltage (+1.5 volts)

Positive AUDIO input 2

Negative AUDIO input 2

GND for Audio Signals

GND for Audio Signals

Digital GND

Digital GND

Reserved for special applications

Reserved for special applications

Reserved for special applications

Reserved for special applications

Reserved for special applications

Reserved for special applications

Digital GND

Digital GND

Port A – For KLV Meta data and other serial data

Port A – For KLV Meta data and other serial data

19 of 90

GMS Inc. doing business as Cobham Tactical Communications and Surveillance

www.cobham.com/tcs

Pin

19

53

20

57

24

58

25

59

26

60

54

21

55

22

56

23

27

30

64

31

65

32

66

61

28

62

29

63

33

67

34

68

Signal

RS422-B P

RS422-B N

RS422-C P

RS422-C N

GND

GND

3.3v I/O

3.3v I/O

3.3v I/O

3.3v I/O

FPGA GPIO3

FPGA GPIO2

FPGA GPIO1

FPGA GPIO0

USB D P

USB D N

USB VBUS

PA EN

SPARE 0

SPARE 1

GND

+3.3V

ENET LTC LED

ENET LTA LED

ENET RTC LED

ENET RTA LED

CHASSIS GND

CHASSIS GND

ENET RD P

ENET RD N

ENET TD P

ENET TD N

Notes

Port B – For KLV Meta data and other serial data

Port B – For KLV Meta data and other serial data

Port C – For KLV Meta data and other serial data

Port C – For KLV Meta data and other serial data

Digital GND

Digital GND

Reserved

Reserved

Reserved

Reserved

Video1 and video 2 reference clock test point. Selectable

GPS one Pulse Per Second (1PPS), 3.3v standard input.

Reserved for special applications

Reserved for special applications

Part of USB interface

Part of USB interface

Part of USB interface

External PA Control (+3V TTL ON)

Reserved for special applications

Reserved for special applications

Digital GND

Part of LAN I/P interface

Part of LAN I/P interface

Part of LAN I/P interface

Part of LAN I/P interface

Safety Ground connected to housing

Safety Ground connected to housing

Part of LAN I/P interface

Part of LAN I/P interface

Part of LAN I/P interface

Part of LAN I/P interface

5.2 Analog Audio Input Configurations

The M2TE has two analog audio circuits. Each circuit is dedicated to one “Program” and has separate configurations/settings for Line and Mic levels. Remember that each of the two video inputs are processed and distributed as separate Programs in the M2TE’s Transport Stream. These ports support a single differential (MONO) input or dual (STEREO) Line-Level inputs. Only one set of inputs will be active at a time per Program.

Table 6 below defines the wiring for all the different possibilities along with the location of Mic Bias connections.

100-M0171X2

GMS Inc. doing business as Cobham Tactical Communications and Surveillance

20 of 90

www.cobham.com/tcs

Table 6 - Audio Configurations

Audio Configuration

Program #1 Audio

(reference table 5 above)

Program #2 Audio

(reference table 5 above)

Balanced high input impedance (100K)

Single ended high input impedance (100K)

Pin 5 ( + input)

Pin 39 (- input)

Pin 42 (AUDIO GND)

Pin 11 ( + input)

Pin 39 (- input)

Pin 46 (AUDIO GND)

Line 1: Pin 5, AUD GND Pin 8

Line 2: Pin 39, AUD GND Pin 42

Line 3: Pin 11, AUD GND Pin 12

Line 4: Pin 39, AUD GND Pin 46

Mic Bias (1.5 VDC)

#1 Pin 6

#2 Pin 40

#3 Pin 10

#4 Pin 44

Note: If 600 Ohm input impedance is required add a parallel 600 Ohm resistor to the external cable assembly.

100-M0171X2

GMS Inc. doing business as Cobham Tactical Communications and Surveillance

21 of 90

www.cobham.com/tcs

6. Local Control Panel Operation

Note: The active settings are maintained in a separate non-volatile memory area; separate from the 20

Configuration Groups we call Group 0. This was done to enable the M2TE’s ability to power-up in the same configuration that was in-play prior to the shut-down of the unit, when the Group 0 settings have NOT been saved into 1 of the 20 Configuration Groups. Changes can be made either from the Front-Panel or from the

LAN GUI (via a LOAD command) that will only affect Group 0.

WARNING: There is a situation where changes are not locked into Group 0’s memory. Before attempting to make any group changes (switching to a different group) to the transmitter from the front

Local Control Panel ensure the unit has correct video input(s) per the current configuration attached, the unit is fully initialized and there are no video errors indicated by the Status Error LED indicator on the front panel.

In addition any changes implemented from the front panel once the ENTR key has been pushed are saved into the current active group (see discussion on Groups in section 7).

6.1 Local Control Panel Introduction

The M2TE can be controlled locally by a user interface panel integral to the transmitter. This interface shows some status and control settings of the transmitter and allows some limited changes to its operation. M2TE has preset configuration groups where you can program various common settings from a computer then simply change the groups as desired.

There are three operational modes; status, configuration and locked modes. Default Operating Mode is the main mode that the local control panel will be in when not being actively used. The configuration mode is when the local control panel is viewing and changing various settings of the

M2TE. The administrator will have the ability to control access to the various modes of the local control panel, so they cannot be changed by the end user. In locked mode, the user will be able to see more information than in Default Operating Mode but will not be allowed to modify them.

This section of the manual will describe the control panel’s operating modes, how to read and change its settings.

6.2 Local Control Panel Physical layout

The control panel has 4 main sections: 5 “MODES” LEDs, 6 “STATUS” LEDs, 20 Numbered LEDs, and 6 key pads for user interface. See Figure 2 - M2TE control panel. This section will further explain these sections below.

100-M0171X2

GMS Inc. doing business as Cobham Tactical Communications and Surveillance

22 of 90

www.cobham.com/tcs

Figure 2 - M2TE control panel

6.3 Power-up Sequence

When the M2TE is first powered on, the local control panel LED will come on in the following manner. It will give you an indication that all systems are up and operating normally. Each new set of lights will indicate a different system check is completed.

1) The ERROR LED will keep blinking until the M2TE is ready to operate.

2) A column at a time will light up then turn off. Starting with all “STATUS” LEDs, all “MODE”

LEDs, Numbered LEDs 1-5, 6-10, 11-15, and finally 16-20 will go on.

3) The CFG GRPS LED will go on and the M2TE’s current configuration group LED will turn on.

Any other STATUS LED will turn on as it would in normal operation mode.

100-M0171X2

GMS Inc. doing business as Cobham Tactical Communications and Surveillance

23 of 90

www.cobham.com/tcs

6.4 Numbered LEDs

The Numbered LED section, pictured in Figure 3 - Numbered LED’s, is used to display various information associated for each MODE LED. Figure 4 - Alphanumeric Characters Displayed on

Numbered LED’s shows Alphanumerical and characters that are displayed. The default setting for the numbered LED’s is to display which preset configuration group is active. All numbered LEDs are green.

Figure 3 - Numbered LED’s

100-M0171X2

GMS Inc. doing business as Cobham Tactical Communications and Surveillance

24 of 90

www.cobham.com/tcs

 

Figure 4 - Alphanumeric Characters Displayed on Numbered LED’s

100-M0171X2

GMS Inc. doing business as Cobham Tactical Communications and Surveillance

25 of 90

www.cobham.com/tcs

6.5 Key Pads

The 6 push button key pads, “MODE”, up”

↑”, down“↓”, left”←”, right “→” and Enter “ENTR“, help the operator change the settings and view the status of the M2TE transmission.

Figure 5 - Key Pads

6.5.1 “MODE” Key Pad

Pressing the “MODE” key pad will scroll you into and out of the various “configuration” modes.

Pressing the MODE key after the “REPORT” LED is selected will put the control panel into Default

Operating Mode.

6.5.2 Arrow Key Pads “ ↑↓←→”

Once the control panel is in the desired configuration mode, use the arrow key pads to select different settings and move around the numbers LEDs.

NOTE: Go to Modes section for a better description of their uses.

6.5.3 Enter Key Pad “

ENTR“

Pressing the enter key pad will change the M2TE to the new selection. If the enter key is not pressed then no changes will occur and the M2TE will operate without any disruptions.

100-M0171X2

GMS Inc. doing business as Cobham Tactical Communications and Surveillance

26 of 90

www.cobham.com/tcs

6.6 Modes

When the “MODE” key is pushed one of the lights under the “MODES” word will start blinking, see

Figure 6 - “MODES” LED’s. This means the numbered LED’s to the right will now only represent what that mode has been set to or what setting you are trying to change it to. No settings will be changed until the Enter “ ENTR” key is pressed. For more information on how to set each mode, see that modes description below. When no keys are pushed for several seconds after the last digit is displayed, the local control panel will timeout. Unless otherwise programmed, the mode light “CFG

GRPS” will go on solid, indicating front panel is in Default Operating Mode, and the numbered LEDs will display the current configuration group.

NOTE: If the front panel has been locked, no “MODE” LEDs will blink. Go to TBD “Locking the local control panel interface” for more information.

Figure 6 - “MODES” LED’s

6.6.1 Configuration Groups (CFG GRPS LED) Operation

6.6.1.1 Checking Frequency of Current Config Group

1) Press the “MODE” key until the “CFG GRPS” LED is blinking. The current configuration group selection will be displayed in the numbered LED section.

2) Press no other keys for 1 second, the currently config group will have its frequency

(XXXX.XXMHz) scroll across the Number LEDS one character at a time.

3) Press the Enter “ ENTR” key to put the control panel into Default Operating Mode.

100-M0171X2

GMS Inc. doing business as Cobham Tactical Communications and Surveillance

27 of 90

www.cobham.com/tcs

NOTE: No settings will change until the Enter “ ENTR” key is pressed. If the current setting is re-selected, if the panel times out, or if the mode key is pressed then the M2TE will keep to the old setting without any disturbance to the M2TE operation.

6.6.1.2 Changing Config Groups

1) Press the “MODE” key until the “CFG GRPS” LED is blinking. The current configuration group selection will be displayed in the numbered LED section.

2) Use the up, down, left, and right keys, “

↑↓←→” to highlight a desired choice. The new configuration group selection will blink, the current selection will stay on solid. If no key is pushed for 1 second, the currently highlighted selection will have its frequency scroll across the Number and Status LEDS in the following manner, XXXX.XXMHz.

3) To view another configuration group frequency press the arrow keys at any time, highlight the desired configuration group LED then wait 1 second for the frequency to display.

4) Press the Enter “ ENTR” key to make the currently highlighted preset configuration groups active. This will set the M2TE to the new settings and put the control panel into Default

Operating Mode.

NOTE: No settings will change until the Enter “ ENTR” key is pressed. If the current setting is re-selected, if the panel times out, or if the mode key is pressed then the M2TE will keep to

the old setting without any disturbance to the M2TE operation.

6.6.2 RF LEVEL (Green LED)

1) Press the “MODE” key until the “RF LEVEL” LED is blinking. A number will appear in the numbered

LED section indicating the current RF power setting.

2) Use the up and right keys, “

↑→”, to increase the RF output power. Use the down and left keys,

↓←”, to decrease the RF power. 0 indicates RF is off and 1-4 indicates different power settings.

3) Press the Enter “ ENTR” key to enable the current power level selection.

NOTE: No settings will change until the Enter “ ENTR” key is pressed. If the current setting is re-selected, if the panel times out, or if the mode key is pressed then the M2TE will keep to the old setting without any disturbance to the M2TE operation.

6.6.3 AUDIO (Green LED)

1) Press the “MODE” key until the “AUDIO” LED is blinking. A number will appear in the numbered

LED section indicating the current audio volume.

NOTE: If the “AUDIO” LED is skipped then audio has either been disabled or it’s been configured for embedded audio. If audio is needed then change the configuration group to one that has analog audio enabled.

100-M0171X2 28 of 90

GMS Inc. doing business as Cobham Tactical Communications and Surveillance

www.cobham.com/tcs

2) Use the up and down keys, “

↑↓”, to increase/decrease the audio volume. 0 indicates volume is at lowest power and 9 is at max.

3) Use the left and right keys, “

→ ←”, to change between the different active audio channels which are displayed in the matrix display ( 1&2, or 3&4), depending upon the group configuration).

4) Press the Enter “ ENTR” key to change the current volume display .

NOTE: Settings will not change until the Enter “ ENTR” key is pressed. If the current setting is re-selected, if the panel times out, or if the mode key is pressed then the M2TE will keep to the old setting without any disturbance to the M2TE operation.

6.6.4 ENCRYPTION (THE “KEY” Yellow LED)

NOTE: There are a few guidelines associated with encryption which the user needs to be aware of to have a better understanding of how the encryption MODE “ “ LED works:

A. Encryption is an purchased option. If it hasn’t been purchased then in the LAN GUI under the

“Encrypt” tab in the Configuration Groups/ Setup menu the encryption mode & key buttons are grayed out. If this is the case then the encryption MODE ” “ key LED is skipped over when pressing the “MODE” button.

B. Encryption must be set to either “AES/Bcrypt 128” or “AES/Bcrypt 256” using the LAN GUI interface (in which case the STATUS encryption “

MODE key” ” LED lights.

”key lights) before the encryption

C. If the encryption MODE key “ ” LED lights the user is then able to change to a predefined key (the keys must be pre-defined using the LAN GUI interface), up to 5 different keys using the control panel arrow keys (

↑↓→ ←). In addition the user is also able to turn the current AES/Bcrypt mode to OFF by selecting the zero (0) value using the control panel arrow keys (

↑↓→ ←). Or if the current mode is OFF the user can turn it back ON by selecting one of the 5 pre-defined keys. Keep in mind the functions described here in step C depend on step B above to be true.

With an understanding A, B & C above the following is the basic operation of the Encryption mode using the front control panel:

1) Press the “MODE key unit the KEY “ ” LED is blinking. The value which appears in the numbered LED section indicates the current encryption key or if a zero (0) value the current encryption mode is OFF (in which case the status LED “ ” will also be OFF).

2) Use the arrow keys, “

→ ←↑↓” to select a different encryption key (1 through 5). The status LED next to the key” ”will turn ON if a value other than zero (0) is selected. If zero (0) value is selected then the status LED will turn OFF.

3) Press the Enter “ ENTR” key to make the current selection active. This will set the M2TE to the new settings and put the control panel into Default Operating Mode.

100-M0171X2 29 of 90

GMS Inc. doing business as Cobham Tactical Communications and Surveillance

www.cobham.com/tcs

NOTE: Settings will not change until the Enter “ ENTR” key is pressed. If the current setting is re-selected, if the panel times out, or if the mode key is pressed then the M2TE will keep to the old setting without any disturbance to the M2TE operation.

6.6.5 REPORT (Green LED)

NOTE: The “REPORT” mode displays the errors indicated by the “ERROR” led.

1) Press the “MODE” key until the “REPORT” LED is blinking.

2) The system will now light LEDs to indicate errors as shown in Table 7 - Report Error Table.

NOTE: No settings are changed in this mode.

LED #

1

2

3

4

5

6

ERROR

Video 1 Input missing or invalid

Video 2 Input missing or invalid

Video 1 format does not match configuration

Video 2 format does not match configuration

Audio Stream 1 missing or invalid

Audio Stream 2 missing or invalid

16

17

18

Invalid RF Board Type or missing RF card

RF Board Database is corrupted or has not been programmed

Main Database is corrupted or has not been programmed

Table 7 - Report Error Table

6.6.5.1 REPORT IP Address

The following procedure can be used to read the current IP address off of the local control panel.

 Press the “MODE” key until the “REPORT” LED is blinking.

100-M0171X2

GMS Inc. doing business as Cobham Tactical Communications and Surveillance

30 of 90

www.cobham.com/tcs

 Press the Enter “ENTR” key.

The IP address will be presented one character at a time in the numbered LED area (keep in mind if

DHCP addressing mode is used the M2TE IP (Ethernet) cable must be plugged into a network before the IP address is displayed otherwise it will show all zeros, 0.0.0.0).

Note: The default factory setting is a static IP address of

192.168.1.36. If the IP addressing of the M2TE transmitter is changed to DHCP ensure the network in which it gets attached to supports DHCP addressing. See appendix A for additional details on IP addressing and interfacing a personal PC to the M2TE. Also refer to section 7.4 (how to find current IP address using the serial port of PC) and section 7.7.4(changing the network addressing).

The M2TE transmitter supports Auto-MDIX (Medial Dependent Interface Crossover). In general it means a crossover IP cable is not needed when it is plugged into a network or a personal PC.

6.7 Status LED’s

The status LED’s are an active display of various functions. They continually inform the user of the function, or lack of function, of the M2TE. This section explains the meaning of the status LEDs.

Figure 7 - “STATUS” LED’s

6.7.1 RF ON

The green “RF ON” LED indicates whether the M2TE is sending a transmitted signal through the RF port or not. If the LED is ON the transmitter is transmitting wireless data. If it is OFF the RF transmitter is OFF.

6.7.2 INPUT

The green “INPUT” LED indicates that the M2TE detects either a video stream on one or more of its inputs or an ASI stream if that is what it is set-up to process. If the LED is ON the M2TE has active

100-M0171X2 31 of 90

GMS Inc. doing business as Cobham Tactical Communications and Surveillance

www.cobham.com/tcs

input video stream(s) on one or more video port(s) and/or Ethernet port, whether the M2TE is actively processing it or not, see the “ERROR” LED for more info. If it is OFF the M2TE does not detect any input video streams. If blinking it indicates the transmitter is expecting two video inputs but it is only receiving one video. Check either the STATUS page using the LAN GUI or use the

“Report” button for the active error code and use Table 7 above for the actual error.

6.7.3 MIC

The green “MIC” LED indicates whether the audio input is set to MIC level or not. If the LED is ON the

M2TE is set to receive a MIC level audio and analog audio is enabled. If it is OFF the audio input mode has been set to Line level, embedded audio or to OFF mode. If a dual video/audio program is active the “MIC” LED will light if only one of the audio inputs has been selected for Mic level. In this case you would have to reference the LAN GUI for the exact audio settings.

6.7.4 4k Operation

The green “4K” LED indicates whether the M2TE is setup in 2K or 4K transmission stream. If the LED is ON the M2TE will transmit data in two different 2K C-OFDM streams, thus 4K transmission. If the

LED is OFF then M2TE will transmit data in one 2K C-OFDM or other stream.

6.7.5 ENCRYPTION (THE “KEY” )

The yellow “KEY” LED indicated that the data being transmitted is encrypted or not. If the LED is ON then the payload data is encrypted. If the LED is OFF then no encryption is used.

6.7.6 ERROR

The red “ERROR” LED indicates if there is a fault in the M2TE or not. If the LED is ON M2TE is not working as indicated. A common cause would be that video is disconnected or the video does not match the selected configuration group.

Rapid Flashing of the Error LED at startup indicates that there has been a fatal Boot Error. Slow steady Blinking at startup indicates that the system is doing self-tests and initializing. Patterned blinking at startup indicates a fatal error with the Xilinx FPGA. Patterned blinking after the system has been running indicates that the system has shut down because it has over heated. To reset the system, the system should be shut down (remove power) and allowed to cool. When the device is cool, it may be repowered.

100-M0171X2

GMS Inc. doing business as Cobham Tactical Communications and Surveillance

32 of 90

www.cobham.com/tcs

For more information, go to the “REPORT” mode, note the error code and then reference Table 7 -

Report Error Table for the actual errors. If the LED is OFF then the M2TE is working as indicated by the local control panel.

6.8 Locking the local control panel interface

To help prevent accidental changes, the local control panel can be locked. Use the LAN GUI and from the Select System Setup/Control Panel menu click on the “Lock” button and then the “Apply” button. In the “Lock” mode the control panel only displays the current status of the different

“MODES” LEDs. No changes can be made from the local control panel if “Lock”. Any changes would then have to be made using the LAN GUI.

6.8.1 Setup lock

As stated in above in section 6.8 the user has the ability to lock the M2TE local control panel so that the operator cannot change any settings while in operation. If the local control panel is locked out, the only way to unlock it is by using the LAN GUI from the System Setup/Control Panel menu.

6.8.2 Locked Modes

This section describes how the “MODE” key works when the local control panel is locked.

“CFG GRPS”

1) When the local control panel is in Default Operating Mode and you press the “MODE” key, the

“CFG GRPS” LED starts blinking. After a couple of seconds the Numbered LEDs will scroll the current frequency.

2) Press the “MODE” key to go to the next MODES’ LED.

3) Press the enter “ENTR” key to place the local control panel back in Default Operating Mode.

“RF LEVEL”

1) Press the “MODE” key until the “RF LEVEL” LED lights. The Numbered LEDs show the current

RF power level (Levels 1-4 or 0). Note that the value zero (0) means that the TX’s RF Control is

OFF.

2) Press the “MODE” key to go to the next MODES’ LED.

3) Press the enter “ENTR” key to place the local control panel back in Default Operating Mode.

100-M0171X2

GMS Inc. doing business as Cobham Tactical Communications and Surveillance

33 of 90

www.cobham.com/tcs

“AUDIO”

1) Press the “MODE” key until the “AUDIO” LED lights (only if analog audio is enabled). The

Numbered LEDs show the current audio power level. If two audios are enabled audios 1,2 level is displayed first. Press the right or left arrow key and audios 3,4 level is displayed.

2) Press the “MODE” key to go to the next MODES’ LED.

3) Press the enter “ENTR” key to place the local control panel back in Default Operating Mode.

ENCRYPTION (THE “KEY” )

1) Press the “MODE” key until the encryption “KEY” LED lights (only if encryption is enabled or was previously enabled, see section 6.6.4). The Numbered LEDs show the current encryption key or the value zero(0) if it’s OFF.

2) Press the “MODE” key to go to the next MODES’ LED.

3) Press the enter “ENTR” key to place the local control panel back in Default Operating Mode.

“REPORT”

The “REPORT” mode works the same as in unlock mode. Please refer to 6.6.5 for more information.

100-M0171X2

GMS Inc. doing business as Cobham Tactical Communications and Surveillance

34 of 90

www.cobham.com/tcs

7. Software Overview

7.1 Product Control & Status Monitoring Approach

Cobham transmitters provide programmable presets or set-up groups that can be configured through a

WEB-based control and status interface that launches through the LAN interface from the transmitter.

Set-up “Groups” are selected by the user through either the transmitter’s local control panel or remotely through the WEB-based interface. The M2TE allows 20 set-up groups.

Note: There is a behind the scene what we call group 0 (zero) active at all times. This group allows any changes made to the transmitter using the LAN GUI which have not been saved to the current active group (1-20) to be remembered on the next power cycle (next boot up). Hence it is a sort of protection of the current transmitter configuration in case the user forgets to “ Save” the current configuration settings to the current active group. However this mode only works if after boot up the transmitter has been fully initialized and has its correct video input(s) attached. The best way to operate the transmitter is to save the parameters which have been changed to a group and load that group with the “Load” command to bring back the parameters associated with that group.

Administrators define the set-up groups for specific applications. Each set-up group (see appendix B for factory default configuration group set-ups) completely defines most of the transmitter’s set-up parameters including Center Frequency, output RF Power Level, Modulation Parameters, Video,

Audio, User Data and Encryption. Each set-up group can be completely different from any other group. Field personnel can select specific set-up groups via pre-determined guidance from the administrators. Matching the transmitter operation to the receiver operation is as simple as selecting the same set-up groups. For example: If the transmitter is set to preset #19, then the receiver needs to be set to preset #19 for them to operate together.

It should also be noted that Cobham transmitters are designed to remember the last set of applied settings and will always power-up in the set-up group settings that it had prior to shut-down.

The Web Control and Status interface can be launched from several WEB Explorer interfaces such as

Microsoft’s Internet Explorer or Fox Fire. The Web interface has been developed to provide in-depth control, configuration and monitoring of the transmitter. When used as part of a higher level system, the

M2TE can also be controlled via an RS-232C interface.

This Web-based Graphical User Interface (GUI) program provides the end user with a straightforward way to interface with the M2TE. During normal operation the M2TE Configurator GUI does not need to be active and all external interfaces can be disconnected from the transmitter unit.

7.2 M2TE Web Interface

100-M0171X2

GMS Inc. doing business as Cobham Tactical Communications and Surveillance

35 of 90

www.cobham.com/tcs

M2TE web interface supports both low-level basic system setup and high-level functional configurations.

It contains pages for support in four categories: (1) General information such as main introduction, realtime system monitoring, product information, and online support link; (2) Configuration groups such as individual group configuration, multi-group configuration file import and export, and restoration of default groups; (3) System setup such as RF power attenuation configuration, encryption configuration, control panel configuration, network configuration, serial port configuration, and logon information update; (4) Upgrade such as DSP and FPGA firmware upgrades, and optional feature upgrade.

The web interface is accessible through Internet web browsers and requires the web browsers to support

JavaScript and turn JavaScript capability on. The web interface has been tested with Windows Internet

Explorer 8, Firefox 8.0, and Google Chrome 16.0.912.63 m. In the following sections, the initial web interface connection and the available configurations are described in detail.

7.3 Account Management

M2TE supports two account access levels such as User and Administrator, among which Administrator level is allowed to access all the information that User level can.

The default login information for User level is:

Name: user

Password: user

The default login information for Administrator level is:

Name: admin

Password: admin

The login information can be updated through Update Logon web page under System Setup menu, which will be discussed later.

7.4 Internet Connection

The IP address of the M2TE device must be known before using an internet browser such as Microsoft IE or Mozilla FireFox. It is beyond the scope of this manual to explain IP addressing details. The user should use caution before changing addressing parameters.

Refer to Appendix A -for additional information on IP addressing and interfacing a personal PC to the

M2TE

100-M0171X2 36 of 90

GMS Inc. doing business as Cobham Tactical Communications and Surveillance

www.cobham.com/tcs

Note: The M2TE transmitter supports Auto-MDIX (Medial Dependent Interface Crossover). In general it means a crossover IP (Ethernet) cable is not needed when it is plugged into a network or a personal

PC.

IP address can be obtained in two ways:

 Front panel (please refer to 6.6.5.1).

 Serial console interface command ngc (described next).

To use serial console interface command use a terminal program such as Tera Term Pro or

HyperTerminal. Connect a serial port cable from the computer to either Serial 1 or Serial 2 cables (both are terminated with DB9 connectors), portion t of the M2TE I/O breakout cable. The M2TE serial port communication requires the following configuration (shown in Figure 8):

Bits per second: 115200

Data bits: 8

Parity:

None

Stop bits: 1

Flow control: None

ASCII Sending/Receiving format:

Line Ends with Line Feeds

The login information:

Name: user

Password: user

100-M0171X2

GMS Inc. doing business as Cobham Tactical Communications and Surveillance

37 of 90

www.cobham.com/tcs

Figure 8 – M2TE serial port connection configuration

After login is accepted, the IP address can be retrieved by typing the command “ ngc”. After typing the “

ngc” command (and pressing the ENTER key) the current network configuration is displayed.

100-M0171X2

GMS Inc. doing business as Cobham Tactical Communications and Surveillance

38 of 90

www.cobham.com/tcs

1> ngc

Network Configuration

Mode:

Static IP Address

M2TE

192.168.1.1

Local Host Name

DNS IP Address

Static Configuration

Subnet mask: 255.255.255.0

Gateway IP Address: 192.168.1.1

Domain Name: gmsinc.com

The user should also be aware that from the serial port interface as demonstrated above, the IP address can also be set or changed. That is with the command “ nsc”, the IP address mode can

mode if it is currently set to static mode. For example the parameters associated with the “ nsc”’ command are:

nsc IPAddress:{DHCP:0}

Using this command to change to a static IP address you type the command, a space and then the static IP address (the standard notation a.b.c.d, four decimal numbers <0-255> separated by three periods <.>, for example “

nsc 192.168.1.36 (and then press the ENTER key from the keyboard. To change to DHCP mode you would type nsc 0” or “nsc DHCP”. Keep in mind this only changes the

IP address not the entire network configuration.

Note: After changing IP address mode or the static address you need to re-power the transmitter before the changes take place.

When the IP address of the device is known, the user can proceed to type the IP address in the address bar of an Internet web browser. A web interface welcome page will then be displayed as shown in Figure 9.

100-M0171X2

GMS Inc. doing business as Cobham Tactical Communications and Surveillance

39 of 90

www.cobham.com/tcs

Figure 9 – Web interface welcome page

Click on Continue button to reach a login prompt window as shown in Figure 10. Type-in the suitable login information into the user name and password text boxes. A main page then opens up as shown in Figure 11.

Figure 10 – Login window

100-M0171X2

GMS Inc. doing business as Cobham Tactical Communications and Surveillance

40 of 90

www.cobham.com/tcs

Figure 11 – Web interface main page

Six items are listed in the main menu: Main, Configuration Groups, Status, System Setup, Upgrade and

Help. Among the above pages, Main, Configuration Groups (except for the Import and Restore Default

Groups options in Configuration Groups), Status, Update Logon submenu under System Setup, and

Help are accessible with User level, and the rest of the pages are accessible only with Administrator level.

These web pages will be discussed in detail in the following sections.

7.5 Group Configurations

The M2TE supports twenty configuration groups where the fundamental system features and functions can be configured and stored into the unit. The Configuration Groups selection in the menu provides a tool to display and configure the groups, which contains four options: Setup, Import, Export and

Restore Default Groups. These options support individual group configuration, multi-group configuration file import and export, and default groups restoration, respectively.

100-M0171X2 41 of 90

GMS Inc. doing business as Cobham Tactical Communications and Surveillance

www.cobham.com/tcs

7.5.1 Individual Configuration Group Setup

Click on Setup from the Configuration Groups item on the menu, the individual group configuration page is displayed, as shown in Figure 12.

Figure 12 – Individual group configuration page (RF Tab)

The individual group configuration page consists of three sections: general configuration section, the operation buttons, and the tab section.

Note: the User access level on this page can only carry out the following operations:

Select a group

Retrieve a group

Load a group

Refresh the active group information

Apply the edited group

Control RF function ON/OFF

Control analog audio volume(s) and audio pair volume lock(s) if available

100-M0171X2

GMS Inc. doing business as Cobham Tactical Communications and Surveillance

42 of 90

www.cobham.com/tcs

Select encryption mode and key index

Section 1:

The general configuration section provides the Active Group Index, the selected Group, and the

Group Name for the selected Group Index. The Active Group Index text box is grayed out because it is not changeable by the user, but rather the status information to reflect the current active group index. When the current group settings are modified and applied to the unit without saving into the system database, the Active Group Index box will show the index with a (Modified) label. The

Group Name input box can take up to 31 characters.

Section 2:

On the right side of the general configuration and tab sections, five buttons provide the operations that the user can carry out in the M2TE:

Retrieve button – retrieves configuration parameters for the selected group index from the system database without activating them.

Load button – loads the configuration parameters from the system database according to the selected group index and activate them in the system

regardless of the edited parameters in the tab section.

Refresh button – retrieves the active group parameters, which could have been modified in the tab section and applied into the system, or could be the original activated group configurations.

Apply button – activates the edited parameters in the tab section without saving them into the system database.

Save button – saves the edited parameters in the tab section into the system database according to the selected group index without activating them.

It should be noted that the first three of the five buttons are carried out based on only the selected group index ignoring the edited tab section contents, while the last two of the five buttons take the edited tab section contents into effect.

Note that because the Save operation stores the edited configuration parameters into system

without activating them, therefore, after the Save button is clicked, the web interface will display the contents of the currently active parameters, which could be different than what user has just saved. Reloading or retrieving the group will show you the previously saved information.

Section 3:

100-M0171X2

GMS Inc. doing business as Cobham Tactical Communications and Surveillance

43 of 90

www.cobham.com/tcs

The tab section consists of seven tabs: RF, Video, Audio, TS, Encryption, Auxiliary Data, and

Streaming configurations. Due to the internal configuration arrangement, the suitable configuration order is from the left tab to the right tab subsequently.

Note that the optional features which are purchased separately and not part of the defaults are also explained below. Therefore, to be able to configure and use Dual Video, 4K RF Carrier Mode, 128-

Bit and 256 Encryption options the user needs to contact the factory for purchase. Otherwise, the corresponding functions and web GUI displays are grayed out .

RF tab (Figure 12) contains all the available configuration parameters for the radio frequency communication functions. RF function can be completely turned off by selecting RF OFF in the RF

Control drop-down list box. Carrier Frequency input frequency values are limited to the purchased band ( for example an S2 band is limited to the values from 1990 to 2500 MHz). RF Power Level drop-down box offers four RF power levels whose actual power values are predefined initially at the factory and reconfigurable by the user on the RF Power page under System Setup menu.

Video tab (Figure 13) allows the user to configure the video source(s) and the desirable bitrate allocations. Up to two video streams are supported and

at least one video stream must be present.

In other words if one of the video input modes is selected to be OFF, the other video input mode cannot be turned off.

The Video 1 Bitrate Allocation input box defines the video 1 bitrate percentage of the whole available bitrates for both video streams. If Video 1 is turned off, Video 1 Bitrate Allocation is default to 0 and Video 2 Bitrate Allocation is default to 100. The similar rule applies to the case when Video

2 is turned off. If both videos are present, the bitrate allocation should take the video formats into consideration due to the different bitrate requirements that various video formats demand.

100-M0171X2

GMS Inc. doing business as Cobham Tactical Communications and Surveillance

44 of 90

www.cobham.com/tcs

Figure 13 - Individual group configuration page (Video Tab)

Audio tab (Figure 14) provides four sub-sections to support audio configuration. The analog audio

1-2 or analog audio 3-4 selection is only available when any Audio input mode is set to ANALOG and

its Analog drop-down choice is set to the corresponding analog audio. The Input Mode selection of either Embedded or Internal Tone Generator does not allow volume adjustment.

The Sample Rate drop-down boxes are grayed out and fixed at 48 KHz now. The Mic PreAmp selection is only available for any corresponding MIC choice configured in the Analog drop-down box.

100-M0171X2

GMS Inc. doing business as Cobham Tactical Communications and Surveillance

45 of 90

www.cobham.com/tcs

Figure 14 - Individual group configuration page (Audio Tab)

When any Balanced analog audio format is selected, the corresponding second Mic PreAmp and second Audio Volume is automatically synchronized with the first Mic PreAmp and first Audio

Volume respectively, and is not adjustable.

TS tab (Figure 15) allows the user to configure the Transport Stream. Only the variables under the

RF tab and the Streaming tab are available when the Transport Stream Source selection of Stream

IN, ASI 1, or ASI2 is chosen.

As a general rule when setting the IDs, Program Numbers, and PIDs do not duplicate numbers in the same Transport Stream. The Channel Rate (Mbps) text box on this Tab is activated and configurable when the RF control has been set to “RF OFF”.

100-M0171X2

GMS Inc. doing business as Cobham Tactical Communications and Surveillance

46 of 90

www.cobham.com/tcs

Note: A little current consumption can be saved by disabling the ASI Out Control if ASI out is not being used. From the pull down box choose “Disabled” and click on the “Apply” button.

Figure 15 - Individual group configuration page (TS Tab)

Encryption tab Figure 16) allows the user to configure the encryption mode (AES/Bcrypt 128 or

AES/Bcrypt 256) and to select a key (up to 5 keys) . The encryption key storage type and the key value can be configured on the Encryption page under System Setup menu.

100-M0171X2

GMS Inc. doing business as Cobham Tactical Communications and Surveillance

47 of 90

www.cobham.com/tcs

Figure 16 - Individual group configuration page (Encryption Tab)

Auxiliary Data tab (Figure 17) allows the user to turn auxiliary data ON/OFF, to choose 7/8bit data, odd/even/no parity, the baud rate and allows user to change the PID. Note that with a two stream/program there can be an Auxiliary Data associated with each stream/program.

100-M0171X2

GMS Inc. doing business as Cobham Tactical Communications and Surveillance

48 of 90

www.cobham.com/tcs

Figure 17 - Individual group configuration page (Auxiliary Data Tab)

Streaming tab (see Figure 18 & Figure 19) contains the LAN streaming configuration for both

Streaming In and Streaming Out. Streaming In and Streaming Out cannot be activated simultaneously. The selection of Streaming In on this tab will overwrite the Transport Stream

Source on TS tab, and vice versa.

Streaming Out setup parameters(reference Figure 19)

 Destination IP Address : Enter destination IP address here… only works with IPv4 addresses, for example 192.168.1.33.

 Destination Port Number: Enter destination port number here, 49152-65535 private port numbers are recommended

 Destination Protocol: Choose between UDP/IP (user datagram protocol) or RTP/UDP/IP

(real time transport protocol with UDP) are the only two supported protocols. Ensure destination application supports these protocols.

100-M0171X2 49 of 90

GMS Inc. doing business as Cobham Tactical Communications and Surveillance

www.cobham.com/tcs

Streaming IN setup parameters (reference Figure 18)

 Multicast address is not currently working. Do not use this option. Use the default of “Device

Default (DHCP)”

 Receiver IP Address: Enter the receiver IP address here…only works with IPv4 addresses

 Receiver Port Number: Enter the receiver port number here, 49152-65535 private port numbers are recommended

Figure 18 - Individual group configuration page (Streaming-In Tab)

100-M0171X2

GMS Inc. doing business as Cobham Tactical Communications and Surveillance

50 of 90

www.cobham.com/tcs

Figure 19 - Individual group configuration page (Streaming-Out Tab)

Inter-Tab Constraints:

General

Because of the Inter-Tab constraints changing individual parameters under any of the 7 tabs

(located under the Configuration Groups/Setup menu) may affect corresponding parameters under other tabs One way of ensuring stability and reliability of the parameters is to modify the

Configuration Group individual parameters (reference section 7.5) as desired and then save the changes as a group (up to 20 groups are allowed) and then load (with the “Load” command) a particular group when the those changes need to be implemented.

Specific Constraints

Taking into account that the Video stream is the fundamental constituent of the Transport

Stream keep the following guidelines in mind when changing individual parameters.

100-M0171X2

GMS Inc. doing business as Cobham Tactical Communications and Surveillance

51 of 90

www.cobham.com/tcs

a) If a dual stream/program is active and the Video 1 Input Mode under the VIDEO tab is turned OFF (OFF selected from the pull down box) the corresponding Audio 1 Input

Mode (under the AUDIO tab), the corresponding Aux Data 1 under the Aux Data tab and the corresponding Program 1 under the TS tab are all disabled at the same time. b) With the condition stated above under (a), if the Video 1 Input Mode in a dual stream/program is re-activated (enabled) the corresponding Audio 1 Input Mode

(under the AUDIO tab) remains disabled (

OFF). However the corresponding Aux

Data 1 under the Aux Data tab and the corresponding Program 1 under the TS tab are re-activated (enabled if they were previously), keeping in mind because audio is OFF, the audio PID is grayed out under the Program 1 of the TS. c) Similar conditions as stated in (a) and (b) also apply when using a single stream/program.

That is if Video 1 Input Mode is active and it is switched over to Video 2 Input Mode the corresponding

Audio 1 Input Mode (under the AUDIO tab), the corresponding Aux

Data 1 under the Aux Data tab and the corresponding Program 1 under the TS tab are all disabled at the same time. And as stated under (b) if Video 1 Input Mode is reactivated the corresponding

Audio 1 Input Mode (under the AUDIO tab) remains

disabled (OFF). However the corresponding Aux Data 1 under the Aux Data tab and the corresponding Program 1 under the TS tab are re-activated (enabled if they were previously), keeping in mind because audio is OFF, the audio PID is grayed out under the

Program 1 of the TS. d) If Video 1 Input Mode is ON (and /or Video 2 Input Mode in a dual program/stream) and the corresponding Audio (Audio 1 and/or Audio2) Input Mode is OFF the corresponding

Audio PID in the Program (Program 1 and/or Program2) in the Transport Stream under the TS tab is automatically turned OFF (grayed out). e) Under the Streaming tab, the selection of Streaming In forces the Transport Stream

Source under the TS tab from INTERNAL to STREAM IN. f) If Streaming In is currently selected (under the Streaming tab) and if INTERNAL is selected as the Transport Stream Source (under the TS tab) then Streaming OFF is automatically selected (under the Streaming Tab). g) If Stream IN is selected as the Transport Stream Source under the TS tab all functions except for the RF parameters under the RF tab , the Streaming IN parameters under the

Streaming tab and the ASI Out Control under the TS tab are

disabled.

h) If ASI (ASI 1 or ASI 2) is selected as the Transport Stream Source under the TS tab the corresponding Video Input Mode (Video 1 or Video 2) under the Video tab is shown as

ASI. If in a dual program/stream mode the second Video Input Mode is OFF.

i) If Streaming In is selected as the Transport Stream Source under the TS tab , the corresponding Video Input Mode is set to OFF (Video 1 Input Mode is set to OFF and in case of a two stream/program Video 2 Input Mode is also disabled). If Streaming In is then set to Streaming OFF, the Video 1 Input Mode remains OFF, however Video 2

Input Mode is then the active video in the case of a single stream/program. In the case of a two stream/program Video 1 Input Mode remains OFF and Video 2 Input Mode is now the active video.

100-M0171X2 52 of 90

GMS Inc. doing business as Cobham Tactical Communications and Surveillance

www.cobham.com/tcs

7.5.2 Configuration Groups File Import

The import page can only be accessed at Administrator level. Click on the Import option from the

Configuration Groups item on the menu, the multi-group configuration file import page is displayed, as shown in Figure 20.

Figure 20 – Multi-group configuration file import

This page provides the user a convenient tool to import a predefined multi-group configuration file from an external storage into the M2TE device without going through individual group setups. In other words a complete set of 20 set-up groups can be imported into the TX with this command. The acceptable configuration file extension is .m2te.

To import a file, first, click on Browse button to locate the configuration file, and second, click on

Import Setup Group Configuration File button to proceed.

This import action parses the input file and stores the multi-group configuration parameters into the

M2TE database. When the file has been imported successfully, the user can use the individual group configuration web page to display and edit information for each group as needed.

Please note that the import action overwrites the current M2TE database, and should be applied with caution.

100-M0171X2

GMS Inc. doing business as Cobham Tactical Communications and Surveillance

53 of 90

www.cobham.com/tcs

7.5.3 Configuration Groups File Export

The stored configuration of all 20 configuration groups in M2TE can be exported to a file on a computer for later use as described in the following. Click on Export option from the Configuration

Groups item on the menu, the multi-group configuration file export page will be displayed, as shown in Figure 21.

Figure 21 – Multi-group configuration file export through Mozilla Firefox

The export action exports the multi-group configuration parameters from the M2TE database into an external file with the extension .m2te, so that this file can be stored externally and ported to different M2TE units.

Please note that this page format is web browser dependent and could appear differently across different web browsers.

7.5.4 Restoration of Default Groups

Click on Restore Default Groups option from the Configuration Groups item on the menu, the default group restoration page will be displayed, as shown in Figure 22.

100-M0171X2

GMS Inc. doing business as Cobham Tactical Communications and Surveillance

54 of 90

www.cobham.com/tcs

Figure 22 – Restore Default Groups Page

Using the “ Restore Defaults Groups”, the user can restore the default multiple group configurations from the factory’s default setup in three ways:

(1) Restore all twenty group configurations from the twenty default groups defined by the factory.

(2) Restore all twenty group configurations from an individual default group defined by the factory.

(3) Restore an individual group configuration from an individual default group defined by the factory.

7.6 Status

This page, as shown in Figure 23, is intended to provide the user with the current important system configurations, real-time video and audio status, and error information. The user can select the refresh rate (at which the page updates) by using the “Start Refresh” command button at the top of the Status page.

Note that in the Audio-Video Formats table, the video Lock means that the configured video format matches the actual input format. See Figure 23.

100-M0171X2

GMS Inc. doing business as Cobham Tactical Communications and Surveillance

55 of 90

www.cobham.com/tcs

Figure 23 – M2TE Status page

7.7 System Setup

The System Setup item on the menu contains the options for the system configurations such as RF

Power, Encryption, Control Panel, Network, Serial Port, and Logon Update. These configurations are described below.

7.7.1 RF Power

The RF Power page provides a tool to configure RF power attenuation values, as shown in Figure

24. The allowable value for each RF power level (0-7dB) is shown in the table. The recommended arrangement for the attenuation values is to make it monotonically decrease as RF power level index increases.

100-M0171X2 56 of 90

GMS Inc. doing business as Cobham Tactical Communications and Surveillance

www.cobham.com/tcs

When the Apply button is clicked, the four RF attenuation values are stored in the system database according to their RF level indexes, and the attenuation associated with the

active RF level index is activated as well.

Figure 24 – M2TE RF Power Configuration page

7.7.2 Encryption

The Encryption page lets user to configure the encryption key storage type and the five encryption keys, as shown in Figure 25 .

100-M0171X2

GMS Inc. doing business as Cobham Tactical Communications and Surveillance

57 of 90

www.cobham.com/tcs

Figure 25 – M2TE Encryption Configuration page

The Non-Store key storage type means that the configured keys are volatile and will be cleared at the next time system startup. In contrast, the Store key storage type means the configured keys will be stored in the system regardless of cycling the system power.

The 128-bit key consists of one string of thirty-two hexadecimal characters. The 256-bit key consists of two strings of thirty-two hexadecimal characters each.

Note that the Apply buttons on this page are independent and they each apply only the corresponding configuration.

100-M0171X2

GMS Inc. doing business as Cobham Tactical Communications and Surveillance

58 of 90

www.cobham.com/tcs

7.7.3 Control Panel

The Control Panel page allows user to lock or unlock the local control panel, as shown in Figure 26.

When the control panel is locked, user can only retrieve the available status information, and cannot change any settings using the control panel.

Figure 26 – M2TE Control Panel Configuration page

7.7.4 Network

Under the System Setup option on the main menu, select Network. A network setup page is displayed as shown in Figure 27.

100-M0171X2

GMS Inc. doing business as Cobham Tactical Communications and Surveillance

59 of 90

www.cobham.com/tcs

Figure 27 – M2TE Network Configuration page

In the Network Setup page the user can choose Static or DHCP (Dynamic Host Configuration

Protocol) addressing. The default configuration for the M2TE is Static, with an address of

192.168.1.36.

If the server network to which the M2TE is connected provides DHCP services then it may be more practical to switch to DHCP addressing. With DHCP configuration, the server automatically issues an address to the M2TE.

Please note that addressing is limited to Ipv4 (Internet Protocol Version 4) only.

It is beyond the scope of this manual to explain IP addressing in detail. The user should use caution before changing addressing parameters. Refer to appendix A for additional information on IP addressing and interfacing a personal PC to the M2TE. Also see above sections 6.6.5.1(Report IP

Address) and 7.4(Internet Connection) .

100-M0171X2

GMS Inc. doing business as Cobham Tactical Communications and Surveillance

60 of 90

www.cobham.com/tcs

7.7.5 Serial Port

The Serial Port page configures the available console serial ports, as shown in Figure 28. Because the serial port will be unavailable for console input when the port is used by other higher-priority applications such as Auxiliary Data Transmission, the note section on the page provides the

currently available serial ports in bold for console input. User can refer to this information to choose which serial port to use for console input.

Figure 28 – M2TE Serial Port Configuration page

7.7.6 Logon Update

The Update Logon option under the System Setup selection on the menu leads to the logon information update page, as shown in Figure 29 . The User level user can only update the User account, while the Administrator level user can update both User and Administrator accounts.

Note that in addition to filling in the new account information, the user must provide the current logon account name and password in the first two input boxes and then the new account name and password and confirmation of the new password in the remaining boxes.

100-M0171X2

GMS Inc. doing business as Cobham Tactical Communications and Surveillance

61 of 90

www.cobham.com/tcs

Figure 29 – M2TE Logon Update page

7.8 System Upgrade

The system configuration pages are accessible only at the Administrator level. Put the mouse over the

Upgrade item on the main menu, the DSP Firmware, Xilinx Firmware, and Optional Features options are shown in the submenu. These options provide fundamental system upgrades; the details are discussed below.

NOTE: Before upgrading it’s wise and strongly recommended to export the existing 20 configuration

groups (see section 7.5.3 on file exporting) especially if the groups have been modified. After upgrading the firmware you can then import the 20 configuration groups or just individual ones (see section 7.5.2 on file importing). In this way you can avoid having to modify the groups again if they were previously modified.

7.8.1 Firmware Upgrade

M2TE allows user to upgrade the new firmware through the web user interface. The Upgrade selection on the main menu contains two firmware upgrade options: DSP firmware and Xilinx

firmware, whose pages are shown in Figure 30 and Figure 31, respectively.

100-M0171X2

GMS Inc. doing business as Cobham Tactical Communications and Surveillance

62 of 90

www.cobham.com/tcs

Figure 30 - M2TE DSP firmware upgrade page

DSP Firmware Upgrade:

The DSP program file extension is “.out” and it is stored in the Flash memory of the M2TE and activated in the DSP at the system start-up.

To update the DSP firmware, the user needs to enter the file name (under File Name text box) of the

DSP program file (*.out) and the Program Number to load it into, and if the file contains a Boot

100-M0171X2

GMS Inc. doing business as Cobham Tactical Communications and Surveillance

63 of 90

www.cobham.com/tcs

Loader it can optionally be programmed into Flash by checking the box. When done, press the

Upload File and Program Flash button to begin.

The Boot Loader boots from Program 2 if it is present, otherwise it will boot from Program 1.

Program 1 is designated as the Factory program and should never be upgraded in the field. Program

2 is designated as the Field Upgrade program and should be used for all field upgrades. Should the field upgrade process ever fail, the Boot Loader will revert to loading the factory program ensuring that a good image is always available to load and run. Rarely, if ever, should a Field Upgrade require updating the Boot Loader and this choice should not be selected unless specifically instructed to do so.

Note:

a) After having read the above how the DSP upgrade works we have found that it is preferred

(and very reliable) after the DSP file name is selected to check off the “1 (Factory)” button and the “Update Boot Loader” for each DSP update. This is because when a new Boot

Loader is needed a customer may forget to check off this box or the factory may forget to inform the customer to load the new Boot Loader. b) If upgrading new DSP firmware ensure to load the corresponding Xilinx firmware (if there is one to be upgraded) as discussed in the next section before re-powering the transmitter.

Xilinx Firmware Upgrade:

The Xilinx program file extension is “.bit” and it is stored in the Flash memory of the M2TE and activated at the system start-up.

100-M0171X2

GMS Inc. doing business as Cobham Tactical Communications and Surveillance

64 of 90

www.cobham.com/tcs

Figure 31 – M2TE Xilinx firmware upgrade page

To update the Xilinx firmware, the user needs to enter the name of the desirable file (*.bit) and then press the Upload File and Program Flash button to begin. The Tag is a label that is used to identify the image and by default will be set to the file name. Optionally, the user can deselect Use File Name and enter any value with up to 31 characters. Please note the maximum supported file size is four

Mbytes.

7.8.2 Optional Features

Current factory enabled options can be viewed by selecting the Optional Features of the Upgrade item on the main menu in the web user interface, as shown in Figure 32. New features can be enabled by entering a 32-bit Upgrade Code Word on the same page, which is supplied by customer service.

100-M0171X2

GMS Inc. doing business as Cobham Tactical Communications and Surveillance

65 of 90

www.cobham.com/tcs

Figure 32 – M2TE optional feature page

The top section on the page shows the current enabled features. And the bottom section is where the 32-bit Upgrade Code Word can be entered to enable additional optional features that are purchased. The unit should be re-powered after adding new features. New features which are enabled should be verified on the same page upon re-powering the M2TE.

7.9 Help

As shown in Figure 33, the Help page provides general information such as the firmware versions, production information, optional feature status, and M2TE online support link.

100-M0171X2

GMS Inc. doing business as Cobham Tactical Communications and Surveillance

66 of 90

www.cobham.com/tcs

Figure 33 – M2TE Help page

100-M0171X2

GMS Inc. doing business as Cobham Tactical Communications and Surveillance

67 of 90

www.cobham.com/tcs

8. Initial Checkout

Included Items

The standard M2TE kit includes the following items:

 M2TE unit

 M2TE full breakout cable (Cobham part number 780-C0526 or 780-C0554) (A/V input,

Auxiliary Data, Control interfaces)

NOTE: Based on customer application Cobham may deliver a receiving system, additional cables and antennas. Contact Factory for further information.

The M2TE is pre-configured by Cobham prior to shipment (based on customer requirements), thus is ready to work “right out of the box”.

8.1 Getting Started

Prior to installing a M2TE unit into the desired target environment, an initial checkout should be performed to ensure proper operation of the unit. The initial checkout consists of configuring a basic

MT2E link.

Figure 34 – Basic M2TE Link Setup shows a basic standard single program M2TE wireless link configuration. (NOTE: MSR and Block Down-Converters & M2D units and their associated hardware are sold separately). The steps necessary to setup the configuration shown in Figure 34 – Basic M2TE

Link Setup are shown below. High throughput (4K) optional M2TE require additional hardware (which includes two MSRs, a DDP plug in card and a combiner).

Figure 34 – Basic M2TE Link Setup

100-M0171X2

GMS Inc. doing business as Cobham Tactical Communications and Surveillance

68 of 90

www.cobham.com/tcs

1. Install Omni-directional antennas onto the M2TE transmitter RF output port and at the receiver end Down-Converter(s) RF input port. Note: Transmitters should not be powered on

without a load attached to the RF output connector. The internal PA could be

damaged.

2. Attach an SDI video source to the M2TE’s SDI 1.0/2.3 video input #1. A composite signal can also be applied to the M2TE’s I/O – Control VHDCI-68 connector using Cobham break out cable, however keep in mind that the video source must match the group setting of the transmitter.

Refer to the software section 7 and section 6 on the selection of the transmitter (M2TE) video groups.

3. The MSR should be pre-configured from the factory (refer to the Cobham web site for the online manual). In short ensure the MSR is powered, has a cable from the ASI out to the decoder ASI input, that each tuner has a RF cable which runs to each block down converter (each tuner is provided power either through the MSR or locally) and is set to the same RF frequency as the transmitter.

4. Attach a video cable from the video out of the decoder to a video monitor. Refer to the decoder’s operational manual for proper setup.

NOTE: Before providing power to the M2TE in the following step ensure to use a

proper heat sink with adequate air flow or equivalent heat sinking method.

5. Provide power to the M2TE (+12 Volts) using Cobham break out cable which connects to the I/O

– Control VHDCI-68 connector. Power supply should be able to source approximately 2 amps.

6. Turn on the video source and video monitor equipment.

7. Insure that the M2TE is set to Set-up Config Group #1. Refer to Section 6 for full Local Control

Panel operating instructions.

8. After approximately 30 seconds the link should be established and video provided by the source should be displayed on the monitor. An optional computer with the MSR control software installed can be used to monitor the receive parameters such as BER, MER and Signal to Noise.

This connection can be through the USB or RS232 port.

The initial checkout described above is simply to check the basic video operation of the M2TE unit. For further details on monitoring and controlling the M2TE using the M2TE’s WEB-based control and status indicator, see section 7.

100-M0171X2

GMS Inc. doing business as Cobham Tactical Communications and Surveillance

69 of 90

www.cobham.com/tcs

9. Specifications

RF Output

Output Frequency: 1 to 7 GHz (In-Bands)

Frequency Resolution****: 100 KHz or 1 MHz

Frequency Accuracy: (+/-) 2.5 ppm (High-G Crystal Optional)

Bandwidth: Selectable

6, 7, 8 MHz Standard

12, 14, 16 MHz Optional

RF Output Power: < 20 mW to 200 mW,

Adjustable

Output Impedance: 50 Ohms with VSWR <1.5:1

Connector: SMA-F

Video Encoding (HD)

Video Processing Capability: Single Video input, Dual Video Inputs (processing of each input can be independently set for all encoder parameters)

3D Modes : Content collection (Separate inputs from two cameras that are GENLOCKed)

Interfaces: Dual HD-SDI/SDI or Dual HDMI (Option)

HD-SDI Standards: SMPTE-292M, -296M, -274M, -424M

HD-SDI SDI Connectors: 1.0/2.3 mm (75 Ohm) 3Gbps

Compression Standard: AVC / H.264

(Per ISO/IEC 14496-10 with interlaced extensions)

Motion Est. Range: (+/-) 192 Horiz., (+/-) 128 Vert.

Video formats/resolutions supported:

Format

1080i

1080PsF

Resolution @ Frame Rate

[email protected]/24/25/29.97/30 fps

1920x1080 @ 23.98/24/25/29.97/30 fps

720p 1280x720 @ 50/59.94/60 fps

Variable GOP Structure: I-only and IP

PsF supported with INTERLACED FORMAT

Profiles supported: BP@HL with interlaced extensions

HDMI Version: Optional*

P3

**Video bit rates: HDTV to 50 Mbps

***System Latency: down to <44 mS (Ultra-Low Latency Mode)

Video Encoding (SD)

Video Processing Capability: Single Video input, Dual Video Inputs (processing of each input can be independently set for all encoder parameters)

3D Modes : Content collection (Separate inputs from two cameras that are GENLOCKed)

Interfaces: Dual SDI and Dual Composite or Dual HDMI and Dual Composite (Option)

SDI Standards: SMPTE-259M

SDI/ Composite Connector: 1.0/2.3 mm (75 Ohm) [Same as HD-SDI connector]

HDMI Version: Optional*

P3

Compression Standard: AVC / H.264

(Per ISO/IEC 14496-10 with interlaced extensions)

Motion Est. Range: (+/-)192 Horiz., (+/-) 128 Vert.

Video format standards: NTSC or PAL

Format Resolution @ Frame Rate (frames

100-M0171X2 70 of 90

GMS Inc. doing business as Cobham Tactical Communications and Surveillance

www.cobham.com/tcs

per second)

576i

480i

720x576 @ 25/29.97 fps (PAL)

720x480 @ 25/29.97 fps (NTSC)

Variable GOP Structure: I-only and IP

Profiles: BP@ML with interlaced extensions

**Video bit rates: to 25 Mbps

***System Latency: down to <44 mS (Ultra-Low Mode)

Audio Encoding

Analog Audio Inputs:

Qty 4 Total, Two Dual, Line-Level and Dual Mic-Level, Single-Ended or Differential, Clip Level 12 dB

Mic Bias: 5 V

Input Impedance: 100K Ohms

Standards: SMPTE-272M, -299M

Digital Audio: Dual Embedded (2-channel) per Video input

Embedded Audio Format: SMPTE 299M

Compression Standard: MPEG-1 Layer 2

Bit rates: 256 Kbit/s per channel.

Sampling Frequency: 48 KHz

THD: < 1 % max.

Response: 20 Hz to 12 KHz, (+/-) 0.25 dB

Crosstalk: >55 dB min

S/N: >50 dB RMS

Connector: P/O Multipin Connector

Transport Stream

Standard: per ISO/IEC 13818-1

Packet Size: 188 Byte

Format: AVC / H.264/ MPEG-4 Part 10 encapsulated into an MPEG Transport Stream

Specification: ITU-T Rec. H.222.0 Amendment 3

Bit Rate: Automatically set from active service settings.

ASI Output

Connector: 1.0/2.3 mm (75 Ohm)

Modulation

Modulation Type: COFDM w/QPSK, 16-QAM, or 64-QAM

Standard: DVB-T compliant

FEC: 1/2, 2/3, 3/4, 7/8

Guard Intervals: 1/32, 1/16,1/8,1/4

COFDM Carriers: 2K Carriers

High Throughput Option

100-M0171X2

GMS Inc. doing business as Cobham Tactical Communications and Surveillance

71 of 90

www.cobham.com/tcs

FEC: 1/2, 2/3, 3/4, 7/8

Guard Intervals: 1/32, 1/16, 1/8, 1/4

COFDM Carriers: 4K Carriers

Program Identification

The unit allows the user to set-up a unique Provider Name and Service Name for each active program.

Scrambling Option

Type: 128/256 Bit Advanced Encryption Standard (AES)

Key Storage: User Controlled, volatile or non-volatile

AUX Data Option

Protocol: RS-232C, Asynchronous, 8/7 Bits, No/Even/Odd-Parity, 1 Stop Bit

Data Rate: Selectable, Up to 115200 KBaud

Aux Data PID: Selectable

Connector: P/O Multipin Connector

Video Adjustments

The digital Video processing provides adjustment for; Brightness, Contrast, Saturation and Hue.

Time Stamping

*

P5

Processes External VANC extracted UTC#1 and SMPTE-12M time stamps from the digitized Video stream input of the HD-SDI/SDI input interface. The secondary UTC#2 is also generated using an external 1PPS signal and EIA-232/422 serial configuration commands.

Key Length Value (KLV) Metadata

*

P5

Implementation of the KLV Metadata meets standards set

by the National Geospatial-Intelligence

Agency (NGA) Motion Imagery Standards Board (MISB). The KLV Metadata is input into the M2TE either via embedding it in the VANC space of the HD-SDI/SDI input interface and/or the separate serial RS-422 interface.

Time Stamp Processing

*

P5

The Picture Timing SEI messages allow each Video frame to be assigned a time value. This time can represent time of origin, capture or alternative ideal display. As such, it can be used to navigate to a frame with a particular time.

The H.264 format, specified in ISO/IEC 14496-10 provides for an optional time stamp to be defined in the

Supplemental Enhanced Information (SEI) message. The picture timing SEI message (pic timing) specified

HH:MM:SS:FF IAW RP 0604 page 5. Additionally, the standard allows for

Auxiliary data to be associated with a particular Video frame using the

Auxiliary

Data Unregistered SEI Message. The primary M2TE time stamp

UTC#1 is inserted into the pic timing SEI element of the NAL packets in the H.264’s output stream. The secondary M2TE time stamp UTC#2 is a 64 bit value indicating the number of microseconds since August 23 rd

1999 and is inserted into the unregistered user data SEI element.

Output Requirements

Serial Output

*

P5

The M2TE outputs MPEG-2 TS data with the following format:

 EIA-422 SSI Synchronous Serial Interface IAW EN 50083-9

 Output Video data rate from 128kbps to 10.7 Mbps 1 kbps resolution.

 The M2TE outputs an MPEG-2 compliant Transport Stream (TS) that not only contains H.264 compressed motion imagery, but also contains time-synchronized metadata and compressed Audio.

100-M0171X2

GMS Inc. doing business as Cobham Tactical Communications and Surveillance

72 of 90

www.cobham.com/tcs

 The MPEG-2 TS output of either EIA-422 (constant bit rate) or Ethernet format operates at a bit rate ranging from 128 kbps to 10.7Mbps adjustable in 1 kbps increments.

 The M2TE is able to operate with an external clock input from the RF communications data link as well as with its own internal clock source.

Ethernet Streaming

The M2TE contains an IEEE 802.3u 10/100Base-TX Ethernet interface. The MPEG-2 TS can be encapsulated in

UDP/IP packets IAW RFC 3984. The M2TE is configurable to send Multicast IP packets without receiving a join request.

RTP/UDP/IP and UDP/IP are the preferred protocols in transmitting multimedia data across networks that use the Internet Protocol (IP). RTP (Real Time Transport Protocol) operates at the Application layer and relies on

User Datagram Protocol (UDP) at the Transport layer. It applies sequence numbers to indicate the order in which packets should be assembled at their destination. UDP is preferable to the Transmission Control Protocol (TCP) for real-time applications because it offers low-latency transport (less overhead) across IP networks.

Physical

Dimensions: 3.6” x 3.12” x 0.767”

(8.61 cu Inches)

9.14 cm x 7.92 cm x 1.91 cm

(13.83 cu cms)

Environmental:

Operational Temperature: -10˚C to +70˚C

(EXTERNAL COOLING REQUIRED)

Humidity: Up to 95% non-condensing

Weight: 8 oz. (227 grams)

DC Power

DC Voltage Range: 9 -32 VDC

Power Consumption: ~14 to ~16 Watts

(Operating mode & Band Dependent)

Control Local

Easy to use local control and status panel allows up to 20 user-defined operating modes covering most programmable parameters including Center Frequency, 4 Range Settings (defined modulation settings), Mic/Line Level Audio, Encryption ON/OFF, and status of Video In and RF Out.

Remote Control & Status M2TE can be controlled through Control Application. Supported vi a WEB server provided through the LAN interface.

Notes

* When used in Ultra-Low Latency mode (Intra-Refresh) with Cobham NA Messenger 2 Decoders and Receiver Decoders.

** With 4K High-Throughput Option on M2TE or Encoder Mode

*** Latency Delay is Decoder dependent

**** Frequency Band Dependent

*

P3

*

P4

*

P5

Development Phase 3 Implementation

Development Phase 4 Implementation

*

P6

Development Phase 5 Implementation

Development Phase 6 Implementation

100-M0171X2

GMS Inc. doing business as Cobham Tactical Communications and Surveillance

73 of 90

www.cobham.com/tcs

Appendix A - IP Static Addressing and Interfacing to a Personal Computer

Ethernet Cable

Note: Refer to sections 6.6.5.1 (Report IP Address), 7.4 (Internet Connection) and 7.4(Changing

Network Configuration) on how to obtain current IP address from the front M2TE panel control, how to obtain and or change IP address through the serial port and how to change the network configuration using the LAN interface respectively.

Also as noted previously in the manual the M2TE only supports Internet Protocol Version IPv4. It also supports Auto-MDIX (Medial Dependent Interface Crossover). In general it means a crossover IP cable is not needed when it is plugged into a network or a personal PC.

A.1. Static

The M2TE transmitter leaves the factory with a static IP setting of 192.168.1.36. Interfacing to a personal computer involves setting the PC to a static address with the same IP class (and network ID) as the M2TE which is a class C (beginning octet is in the range of 192-223). By setting the PC to a static address with the same IP class and network ID it will recognize the M2TE and it will be able to talk to it.

The following steps show how to set the PC to a static address.

The example below is from a Windows 7 operating system. An XP operating system is similar. The object is to get to the properties of the Local Area Connection, select the properties of the “Internet

Protocol Version 4 (TCP/IPv4)’ or “Internet Protocol (TCP/IP)” in the case of an XP operating system and then check “Use the following IP address” and set it to a class C address with the same network ID as the M2TE.

 From the desktop click on the Windows start button and select the “Control Panel”. See Figure

35 below.

100-M0171X2

GMS Inc. doing business as Cobham Tactical Communications and Surveillance

74 of 90

www.cobham.com/tcs

Figure 35 - Windows Start Button

100-M0171X2

GMS Inc. doing business as Cobham Tactical Communications and Surveillance

75 of 90

www.cobham.com/tcs

Figure 36 - Control Panel

 From the Control Panel under the “Network and Internet” Icon click on the “View network status and tasks”. See Figure 36. You may need to select the Control Panel “Category” view to see the picture similar to the Figure 36.

100-M0171X2

GMS Inc. doing business as Cobham Tactical Communications and Surveillance

76 of 90

www.cobham.com/tcs

Figure 37 - Network Center

 Click on the “Change adapter settings” on the left side of the screen as shown in Figure 37.

100-M0171X2

GMS Inc. doing business as Cobham Tactical Communications and Surveillance

77 of 90

www.cobham.com/tcs

Figure 38 - Network Connections

 Right click on the “Local Area Connection” icon and select properties.

100-M0171X2

GMS Inc. doing business as Cobham Tactical Communications and Surveillance

78 of 90

www.cobham.com/tcs

Figure 39 - LAN Properties

 Select the “Internet Protocol Version 4 (TCP/IPv4) or in the case of an XP system “Internet

Protocol (TCP/IP)” and then click on the “Properties” button as shown in Figure 39.

100-M0171X2

GMS Inc. doing business as Cobham Tactical Communications and Surveillance

79 of 90

www.cobham.com/tcs

Currently set for

DHCP

Figure 40 - TCP/IPv4 Properties

 The default setting for many PCs is DHCP addressing as shown in Figure 40.

 Check the “Use the following IP address” radio button .This sets the PC for static addressing. Then enter a class C address such as

192.168.1

.20 under the” IP address” text box.

Click in the “Subnet mask” text box and the PC should automatically set the subnet mask associated with the class C addressing. See Figure 41.

100-M0171X2

GMS Inc. doing business as Cobham Tactical Communications and Surveillance

80 of 90

www.cobham.com/tcs

IP address of PC

Figure 41 - Static IP Address

 That is all that is needed to be able to communicate with the M2TE. Make sure to click on the

“OK” button and then exit the properties window. You should now be able to open a Browser such as Microsoft IE and type in the default IP address of the M2TE (in this example it is

192.168.1.36) and it should be able to talk to it (make sure to plug in the IP (Ethernet) cable from the M2TE to the PC).

Keep in mind the following:

 The IP address set for the PC as shown above in Figure 41 is its static IP address (192.168.1.20),

do not enter the IP address of the M2TE here. The IP address of the PC must be different from the M2TE IP address; you cannot have two different devices with the same IP address on a network. The “192.168.1” portion of this address shows that it is a class C address with a network ID of 192.168.1. The “.20” portion states the host information. Host information can be set from 2 to 254. Zero (0), 1 and 255 are usually reserved or have special meaning, so do not use them. Hence as long as the network ID is the same as the M2TE the PC will be able to communicate with the M2TE. So I could set the IP address of the PC to 192.168.1. <

2-254> and it still would be able to communicate with the M2TE. For example instead of using

192.168.1.20, I could use 192.168.1.30 or 192.168.1.5 or 192.168.1.60, etc.

100-M0171X2

GMS Inc. doing business as Cobham Tactical Communications and Surveillance

81 of 90

www.cobham.com/tcs

 Since the static IP address of the M2TE also has a network ID of 192.168.1 (its IP address is

192.168.1.36) the PC is able to communicate with it.

 Remember IP addressing can be much more involved and complicated but the above example should be enough to get things working.

A.2. DHCP (Dynamic Host Configuration Protocol)

 DHCP is an automated means of assigning a unique IP address to a device on a network. The

M2TE can be set up for DHCP, see section 7.7.4. If the server network to which the M2TE is connected provides DHCP services then it may be more practical to switch to DHCP addressing.

 Keep in mind if the M2TE is set up for DHCP addressing then each time the it gets attached to the computer network the IP address may change (depending on the configuration of the DHCP server; the IP addresses that it issues are leased for an limited amount of time, once the leased has expired a new IP address may be issued). Hence when the M2TE IP (Ethernet) cable is attached to the computer network it may be necessary to find the current IP address. See section 6.6.5.1 “Report IP Address”.

 Also be aware if the M2TE is set for DHCP addressing and the IP (Ethernet) cable of the unit has not been attached to a computer network then the reported IP address will show all 0’s, for example 0.0.0.0. If this is the case make sure to attach the M2TE IP cable into the network which has a DHCP server and that the M2TE has been set for DHCP addressing.

Finally remember that through the serial port, see section 7.4 you can view the current IP settings, the current addressing mode and the current IP. In addition you can change the mode and set a static IP address using the serial port.

100-M0171X2

GMS Inc. doing business as Cobham Tactical Communications and Surveillance

82 of 90

www.cobham.com/tcs

Appendix B - Cable, M2T External Breakout Cables

100-M0171X2 83 of 90 www.cobham.com/tcs

100-M0171X2 84 of 90 www.cobham.com/tcs

Appendix C - Factory Default Set-up Groups

Dual Program Versions (2K Only)

Group

Index

9

10

11

12

13

14

15

16

D: 1080p29.97 &

1080p29.97

17 D: 720p59.94 & 720p59.94

18

19

20

Group Name

S: NTSC Composite

S: PAL Composite

D: 1080i/29.97 &

D: 1080i/25 & 1080i/25

D: 1080p25 & 1080p25

D: 1080psf29.97 &

D: 1080psf25 & 1080psf25

D: 720p50 & 720p50

D: NTSC Comp & NTSC

Comp

D: PAL Comp & PAL

Comp

Video bitrate allocate%

100

100

100

100

100

100

100

100

100

100

50

Video1

Input

Mode

SDI

SDI

SDI

SDI

SDI

SDI

SDI

SDI

CVBS_M

CVBS_M

Video2

Input

Mode

OFF

OFF

OFF

OFF

OFF

OFF

OFF

OFF

OFF

OFF

Video1 Format

1080i/29.97

(1080psf29.97)

1080i/25

(1080psf25)

1080p29.97

1080p25

1080i/29.97

(1080psf29.97)

1080i/25

(1080psf25)

720p59.94

720p50

480i/29.97

576i/25

Video2 Format

1080i/29.97

(1080psf29.97)

1080i/25

(1080psf25)

1080p29.97

1080p25

1080i/29.97

(1080psf29.97)

1080i/25

(1080psf25)

720p59.94

720p50

480i/29.97

576i/25

Stereo Stream 1

Input Mode

ANALOG

SINGLE-ENDED

LINE 1-2

ANALOG

SINGLE-ENDED

LINE 1-2

ANALOG

SINGLE-ENDED

LINE 1-2

ANALOG

SINGLE-ENDED

LINE 1-2

ANALOG

SINGLE-ENDED

LINE 1-2

ANALOG

SINGLE-ENDED

LINE 1-2

ANALOG

SINGLE-ENDED

LINE 1-2

ANALOG

SINGLE-ENDED

LINE 1-2

ANALOG

SINGLE-ENDED

LINE 1-2

ANALOG

SINGLE-ENDED

LINE 1-2

1080i/29.97 1080i/29.97

(1080psf29.97)

ANALOG

SINGLE-ENDED

LINE 1-2

ANALOG

SINGLE-ENDED

LINE 1-2 SDI SDI

1080i/25

(1080psf25)

1080i/25

(1080psf25)

ANALOG

SINGLE-ENDED

SDI SDI 1080p29.97 1080p29.97 LINE 1-2

50

50

50

50

50

50

SDI

SDI

SDI

SDI

SDI

SDI

SDI

SDI

1080p25

1080i/29.97

1080i/25

(1080psf25)

720p59.94

720p50

CVBS_M CVBS_M 480i/29.97

CVBS_M CVBS_M 576i/25

1080p25

1080i/29.97

(1080psf29.97)

1080i/25

(1080psf25)

720p59.94

720p50

480i/29.97

576i/25

ANALOG

SINGLE-ENDED

LINE 1-2

ANALOG

SINGLE-ENDED

LINE 1-2

ANALOG

SINGLE-ENDED

LINE 1-2

ANALOG

SINGLE-ENDED

LINE 1-2

ANALOG

SINGLE-ENDED

LINE 1-2

ANALOG

SINGLE-ENDED

LINE 1-2

ANALOG

SINGLE-ENDED

LINE 1-2

Analog

Audio

1-2

Sample

Rate

48 KHZ

48 KHZ

48 KHZ

48 KHZ

48 KHZ

48 KHZ

48 KHZ

48 KHZ

48 KHZ

48 KHZ

48 KHZ

48 KHZ

48 KHZ

48 KHZ

48 KHZ

48 KHZ

48 KHZ

48 KHZ

48 KHZ

48 KHZ

Stereo

Stream

1

Encode

Bitrate

Stereo

Stream 2

Input

Mode

256 Kb/s OFF

256 Kb/s OFF

256 Kb/s OFF

256 Kb/s OFF

256 Kb/s OFF

256 Kb/s OFF

256 Kb/s OFF

256 Kb/s OFF

256 Kb/s OFF

256 Kb/s OFF

ANALOG

SINGLE-

256 Kb/s

ENDED

LINE 3-4

ANALOG

SINGLE-

256 Kb/s

256 Kb/s

256 Kb/s

ENDED

LINE 3-4

ANALOG

SINGLE-

ENDED

LINE 3-4

ANALOG

SINGLE-

ENDED

LINE 3-4

256 Kb/s

256 Kb/s

ANALOG

SINGLE-

ENDED

LINE 3-4

ANALOG

SINGLE-

ENDED

LINE 3-4

256 Kb/s

256 Kb/s

256 Kb/s

256 Kb/s

ANALOG

SINGLE-

ENDED

LINE 3-4

ANALOG

SINGLE-

ENDED

LINE 3-4

ANALOG

SINGLE-

ENDED

LINE 3-4

ANALOG

SINGLE-

ENDED

LINE 3-4

Analog

Audio 3-4

Sample

Rate

Stereo

Stream 2

Encode

Bitrate

Audio 1

Volume

(dB)

Audio 2

Volume

(dB)

Audio 1-2

Pair

Volume

Lock

48 KHZ

48 KHZ

48 KHZ

48 KHZ

48 KHZ

48 KHZ

48 KHZ

48 KHZ

48 KHZ

48 KHZ

256 Kb/s

256 Kb/s

256 Kb/s

256 Kb/s

256 Kb/s

256 Kb/s

256 Kb/s

256 Kb/s

256 Kb/s

256 Kb/s

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

TRUE

TRUE

TRUE

TRUE

TRUE

TRUE

TRUE

TRUE

TRUE

TRUE

Audio 1

Mic

PreAmp

Audio 2

Mic

PreAmp

Audio 3

Volume

(dB)

+16 dB

+16 dB

+16 dB

+16 dB

+16 dB

+16 dB

+16 dB

+16 dB

+16 dB

+16 dB

+16 dB

+16 dB

+16 dB

+16 dB

+16 dB

+16 dB

+16 dB

+16 dB

+16 dB

+16 dB

0

0

0

0

0

0

0

0

0

0

Audio 4

Volume

(dB)

Audio 3-4

Pair

Volume

Lock

Audio 3

Mic

PreAmp

Audio 4

Mic

PreAmp

0

0

0

0

0

0

0

0

0

0

TRUE

TRUE

TRUE

TRUE

TRUE

TRUE

TRUE

TRUE

TRUE

TRUE

+16 dB

+16 dB

+16 dB

+16 dB

+16 dB

+16 dB

+16 dB

+16 dB

+16 dB

+16 dB

+16 dB

+16 dB

+16 dB

+16 dB

+16 dB

+16 dB

+16 dB

+16 dB

+16 dB

+16 dB

Transport

Stream

Source

INTERNAL

INTERNAL

INTERNAL

INTERNAL

INTERNAL

INTERNAL

INTERNAL

INTERNAL

INTERNAL

INTERNAL

RF

Carrier

Mode

2K

CARRIER

2K

CARRIER

2K

CARRIER

2K

CARRIER

2K

CARRIER

2K

CARRIER

2K

CARRIER

2K

CARRIER

2K

CARRIER

2K

CARRIER

48 KHZ

48 KHZ

256 Kb/s

256 Kb/s

0

0

0

0

TRUE

TRUE

+16 dB

+16 dB

+16 dB

+16 dB

0

0

0

0

TRUE

TRUE

+16 dB

+16 dB

+16 dB

+16 dB

INTERNAL

2K

CARRIER

INTERNAL

2K

CARRIER

48 KHZ

48 KHZ

48 KHZ

48 KHZ

48 KHZ

256 Kb/s

256 Kb/s

256 Kb/s

256 Kb/s

256 Kb/s

0

0

0

0

0

0

0

0

0

0

TRUE

TRUE

TRUE

TRUE

TRUE

+16 dB

+16 dB

+16 dB

+16 dB

+16 dB

+16 dB

+16 dB

+16 dB

+16 dB

+16 dB

0

0

0

0

0

0

0

0

0

0

TRUE

TRUE

TRUE

TRUE

TRUE

+16 dB

+16 dB

+16 dB

+16 dB

+16 dB

+16 dB

+16 dB

+16 dB

+16 dB

+16 dB

INTERNAL

2K

CARRIER

INTERNAL

2K

CARRIER

INTERNAL

2K

CARRIER

INTERNAL

2K

CARRIER

INTERNAL

2K

CARRIER

48 KHZ

48 KHZ

48 KHZ

256 Kb/s

256 Kb/s

256 Kb/s

0

0

0

0

0

0

TRUE

TRUE

TRUE

+16 dB

+16 dB

+16 dB

+16 dB

+16 dB

+16 dB

0

0

0

0

0

0

TRUE

TRUE

TRUE

+16 dB

+16 dB

+16 dB

+16 dB

+16 dB

+16 dB

INTERNAL

2K

CARRIER

INTERNAL

2K

CARRIER

INTERNAL

2K

CARRIER

100-M0171X2

GMS Inc. doing business as Cobham Tactical Communications and Surveillance

85 of 90 www.cobham.com/tcs

100-M0171X2

GMS Inc. doing business as Cobham Tactical Communications and Surveillance

Group

Index

COFDM

Mod

Mode

COFDM

BW

COFDM

FEC

COFDM

Guard

Interval

1 1/32

L8

Band

Carrier

Freq

(MHz)

L2

Band

Carrier

Freq

(MHz)

S2

Band

Carrier

Freq

(MHz)

S1

Band

Carrier

Freq

(MHz)

F2

Band

Carrier

Freq

(MHz)

S3

Band

Carrier

Freq

(MHz)

CG

Band

Carrier

Freq

(MHz)

C2

Band

Carrier

Freq

(MHz)

C9

Band

Carrier

Freq

(MHz)

CA

Band

Carrier

Freq

(MHz)

F3

Band

Carrier

Freq

(MHz)

F4

Band

Carrier

Freq

(MHz)

X7

Band

Carrier

Freq

(MHz)

X8

Band

Carrier

Freq

(MHz)

RF

Control

1435 1700 1999 2200 2412 2400 3100 4400 4940 5000 5725 5500 6425 6875

RF

Spectrum

Inversion

OFF

RF

PWR

LVL

Transport

Stream ID

Network

ID

4

PMT

1 PID

PMT

1

Prog

Num

Video

1 PID

Video

1 PCR

PID

PMT

2 PID

PMT

2

Prog

Num

Video

2 PID

Video

2 PCR

PID

Stereo

Stream

1 PID

Stereo

Stream

2 PID

1 100 32 1 40 50 33 2 41 51 60 61

2

3

4

13

14

15

16

17

18

19

20

1/16

1/32

1/16

5 1/32

6 1/16

7 1/8

8 1/8

9 1/16

10 1/16

11 1/32

12 1/32

1/16

1/16

1/32

1/32

1/32

1/16

1/16

1/16

1485 1775 2245 2300 2437 2550 3250 4700 4965 5250 5775 5700 6475 6950

1535 1850 2462 2400 2462 2700 3400 5000 4990 5500 5825 5900 6525 7125

1435 1700 1999 2200 2412 2400 3100 4400 4940 5000 5725 5500 6425 6875

OFF

OFF

OFF

1485 1775 2245 2300 2437 2550 3250 4700 4965 5250 5775 5700 6475 6950 OFF

1535 1850 2462 2400 2462 2700 3400 5000 4990 5500 5825 5900 6525 7125 OFF

1435 1700 1999 2200 2412 2400 3100 4400 4940 5000 5725 5500 6425 6875 OFF

1485 1775 2245 2300 2437 2550 3250 4700 4965 5250 5775 5700 6475 6950 OFF

1535 1850 2462 2400 2462 2700 3400 5000 4990 5500 5825 5900 6525 7125 OFF

1435 1700 1999 2200 2412 2400 3100 4400 4940 5000 5725 5500 6425 6875 OFF

1485 1775 2245 2300 2437 2550 3250 4700 4965 5250 5775 5700 6475 6950 OFF

1535 1850 2462 2400 2462 2700 3400 5000 4990 5500 5825 5900 6525 7125 OFF

1435 1700 1999 2200 2412 2400 3100 4400 4940 5000 5725 5500 6425 6875

1485 1775 2245 2300 2437 2550 3250 4700 4965 5250 5775 5700 6475 6950

1535 1850 2462 2400 2462 2700 3400 5000 4990 5500 5825 5900 6525 7125

1435 1700 1999 2200 2412 2400 3100 4400 4940 5000 5725 5500 6425 6875

1485 1775 2245 2300 2437 2550 3250 4700 4965 5250 5775 5700 6475 6950

1535 1850 1999 2400 2462 2700 3400 5000 4990 5500 5825 5900 6525 7125

1435 1700 2245 2200 2412 2400 3100 4400 4940 5000 5725 5500 6425 6875

1485 1775 2462 2300 2437 2550 3250 4700 4965 5250 5775 5700 6475 6950

OFF

OFF

OFF

OFF

OFF

OFF

OFF

OFF

4

4

4

4

4

4

4

4

4

4

4

4

4

4

4

4

4

4

4

1 100 32 1 40 50 33 2 41 51 60 61

1 100 32 1 40 50 33 2 41 51 60 61

1 100 32 1 40 50 33 2 41 51 60 61

1 100 32 1 40 50 33 2 41 51 60 61

1 100 32 1 40 50 33 2 41 51 60 61

1 100 32 1 40 50 33 2 41 51 60 61

1 100 32 1 40 50 33 2 41 51 60 61

1 100 32 1 40 50 33 2 41 51 60 61

1 100 32 1 40 50 33 2 41 51 60 61

1 100 32 1 40 50 33 2 41 51 60 61

1 100 32 1 40 50 33 2 41 51 60 61

1 100 32 1 40 50 33 2 41 51 60 61

1 100 32 1 40 50 33 2 41 51 60 61

1 100 32 1 40 50 33 2 41 51 60 61

1 100 32 1 40 50 33 2 41 51 60 61

1 100 32 1 40 50 33 2 41 51 60 61

1 100 32 1 40 50 33 2 41 51 60 61

1 100 32 1 40 50 33 2 41 51 60 61

1 100 32 1 40 50 33 2 41 51 60 61

86 of 90 www.cobham.com/tcs

Single Program Versions

Group

Index

9

10

11

12

13

14

15

16

D: 1080p29.97 &

1080p29.97

17 D: 720p59.94 & 720p59.94

18

19

20

Group Name

S: NTSC Composite

S: PAL Composite

D: 1080i/29.97 &

D: 1080i/25 & 1080i/25

D: 1080p25 & 1080p25

D: 1080psf29.97 &

D: 1080psf25 & 1080psf25

D: 720p50 & 720p50

D: NTSC Comp & NTSC

Comp

D: PAL Comp & PAL

Comp

Video bitrate allocate%

100

100

100

100

100

100

100

100

100

100

50

50

Video1

Input

Mode

SDI

SDI

SDI

SDI

SDI

SDI

SDI

SDI

CVBS_M

CVBS_M

Video2

Input

Mode

OFF

OFF

OFF

OFF

OFF

OFF

OFF

OFF

OFF

OFF

Video1 Format

1080i/29.97

(1080psf29.97)

1080i/25

(1080psf25)

1080p29.97

1080p25

1080i/29.97

(1080psf29.97)

1080i/25

(1080psf25)

720p59.94

720p50

480i/29.97

576i/25

Video2 Format

1080i/29.97

(1080psf29.97)

1080i/25

(1080psf25)

1080p29.97

1080p25

1080i/29.97

(1080psf29.97)

1080i/25

(1080psf25)

720p59.94

720p50

480i/29.97

576i/25

Stereo Stream 1

Input Mode

ANALOG

SINGLE-ENDED

LINE 1-2

ANALOG

SINGLE-ENDED

LINE 1-2

ANALOG

SINGLE-ENDED

LINE 1-2

ANALOG

SINGLE-ENDED

LINE 1-2

ANALOG

SINGLE-ENDED

LINE 1-2

ANALOG

SINGLE-ENDED

LINE 1-2

ANALOG

SINGLE-ENDED

LINE 1-2

ANALOG

SINGLE-ENDED

LINE 1-2

ANALOG

SINGLE-ENDED

LINE 1-2

ANALOG

SINGLE-ENDED

LINE 1-2

1080i/29.97 1080i/29.97

(1080psf29.97)

ANALOG

SINGLE-ENDED

LINE 1-2

ANALOG

SINGLE-ENDED

LINE 1-2 SDI

ANALOG

SINGLE-ENDED

SDI SDI 1080p29.97 1080p29.97 LINE 1-2

SDI

SDI

SDI

1080i/25

(1080psf25)

1080p25

1080i/25

(1080psf25)

1080p25

ANALOG

SINGLE-ENDED

LINE 1-2

50

50

50

50

50

SDI

SDI

SDI

SDI

SDI

SDI

1080i/29.97

1080i/25

(1080psf25)

720p59.94

720p50

CVBS_M CVBS_M 480i/29.97

CVBS_M CVBS_M 576i/25

1080i/29.97

(1080psf29.97)

1080i/25

(1080psf25)

720p59.94

720p50

480i/29.97

576i/25

ANALOG

SINGLE-ENDED

LINE 1-2

ANALOG

SINGLE-ENDED

LINE 1-2

ANALOG

SINGLE-ENDED

LINE 1-2

ANALOG

SINGLE-ENDED

LINE 1-2

ANALOG

SINGLE-ENDED

LINE 1-2

ANALOG

SINGLE-ENDED

LINE 1-2

Analog

Audio

1-2

Sample

Rate

48 KHZ

48 KHZ

48 KHZ

48 KHZ

48 KHZ

48 KHZ

48 KHZ

48 KHZ

48 KHZ

48 KHZ

48 KHZ

48 KHZ

48 KHZ

48 KHZ

48 KHZ

48 KHZ

48 KHZ

48 KHZ

48 KHZ

48 KHZ

Stereo

Stream

1

Encode

Bitrate

Stereo

Stream 2

Input

Mode

256 Kb/s OFF

256 Kb/s OFF

256 Kb/s OFF

256 Kb/s OFF

256 Kb/s OFF

256 Kb/s OFF

256 Kb/s OFF

256 Kb/s OFF

256 Kb/s OFF

256 Kb/s OFF

256 Kb/s

256 Kb/s

256 Kb/s

256 Kb/s

256 Kb/s

256 Kb/s

256 Kb/s

256 Kb/s

256 Kb/s

256 Kb/s

SINGLE-

ENDED

LINE 3-4

ANALOG

SINGLE-

ENDED

LINE 3-4

ANALOG

SINGLE-

ENDED

LINE 3-4

ANALOG

SINGLE-

ENDED

LINE 3-4

ANALOG

SINGLE-

ENDED

LINE 3-4

ANALOG

SINGLE-

ENDED

LINE 3-4

ANALOG

SINGLE-

ENDED

LINE 3-4

ANALOG

SINGLE-

ENDED

LINE 3-4

ANALOG

SINGLE-

ENDED

LINE 3-4

ANALOG

SINGLE-

ENDED

LINE 3-4

ANALOG

Analog

Audio 3-4

Sample

Rate

Stereo

Stream 2

Encode

Bitrate

Audio 1

Volume

(dB)

Audio 2

Volume

(dB)

Audio 1-2

Pair

Volume

Lock

48 KHZ

48 KHZ

48 KHZ

48 KHZ

48 KHZ

48 KHZ

48 KHZ

48 KHZ

48 KHZ

48 KHZ

256 Kb/s

256 Kb/s

256 Kb/s

256 Kb/s

256 Kb/s

256 Kb/s

256 Kb/s

256 Kb/s

256 Kb/s

256 Kb/s

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

TRUE

TRUE

TRUE

TRUE

TRUE

TRUE

TRUE

TRUE

TRUE

TRUE

Audio 1

Mic

PreAmp

Audio 2

Mic

PreAmp

Audio 3

Volume

(dB)

+16 dB

+16 dB

+16 dB

+16 dB

+16 dB

+16 dB

+16 dB

+16 dB

+16 dB

+16 dB

+16 dB

+16 dB

+16 dB

+16 dB

+16 dB

+16 dB

+16 dB

+16 dB

+16 dB

+16 dB

0

0

0

0

0

0

0

0

0

0

Audio 4

Volume

(dB)

Audio 3-4

Pair

Volume

Lock

Audio 3

Mic

PreAmp

Audio 4

Mic

PreAmp

0

0

0

0

0

0

0

0

0

0

TRUE

TRUE

TRUE

TRUE

TRUE

TRUE

TRUE

TRUE

TRUE

TRUE

+16 dB

+16 dB

+16 dB

+16 dB

+16 dB

+16 dB

+16 dB

+16 dB

+16 dB

+16 dB

+16 dB

+16 dB

+16 dB

+16 dB

+16 dB

+16 dB

+16 dB

+16 dB

+16 dB

+16 dB

Transport

Stream

Source

INTERNAL

INTERNAL

INTERNAL

INTERNAL

INTERNAL

INTERNAL

INTERNAL

INTERNAL

INTERNAL

INTERNAL

RF

Carrier

Mode

2K

CARRIER

2K

CARRIER

2K

CARRIER

2K

CARRIER

2K

CARRIER

2K

CARRIER

2K

CARRIER

2K

CARRIER

2K

CARRIER

2K

CARRIER

48 KHZ

48 KHZ

256 Kb/s

256 Kb/s

0

0

0

0

TRUE

TRUE

+16 dB

+16 dB

+16 dB

+16 dB

0

0

0

0

TRUE

TRUE

+16 dB

+16 dB

+16 dB

+16 dB

INTERNAL

2K

CARRIER

INTERNAL

2K

CARRIER

48 KHZ

48 KHZ

48 KHZ

48 KHZ

48 KHZ

48 KHZ

48 KHZ

48 KHZ

256 Kb/s

256 Kb/s

256 Kb/s

256 Kb/s

256 Kb/s

256 Kb/s

256 Kb/s

256 Kb/s

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

TRUE

TRUE

TRUE

TRUE

TRUE

TRUE

TRUE

TRUE

+16 dB

+16 dB

+16 dB

+16 dB

+16 dB

+16 dB

+16 dB

+16 dB

+16 dB

+16 dB

+16 dB

+16 dB

+16 dB

+16 dB

+16 dB

+16 dB

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

TRUE

TRUE

TRUE

TRUE

TRUE

TRUE

TRUE

TRUE

+16 dB

+16 dB

+16 dB

+16 dB

+16 dB

+16 dB

+16 dB

+16 dB

+16 dB

+16 dB

+16 dB

+16 dB

+16 dB

+16 dB

+16 dB

+16 dB

INTERNAL

2K

CARRIER

INTERNAL

2K

CARRIER

INTERNAL

2K

CARRIER

INTERNAL

2K

CARRIER

INTERNAL

2K

CARRIER

INTERNAL

2K

CARRIER

INTERNAL

2K

CARRIER

INTERNAL

2K

CARRIER

100-M0171X2

GMS Inc. doing business as Cobham Tactical Communications and Surveillance

87 of 90 www.cobham.com/tcs

100-M0171X2

GMS Inc. doing business as Cobham Tactical Communications and Surveillance

Group

Index

COFDM

Mod

Mode

COFDM

BW

COFDM

FEC

COFDM

Guard

Interval

1 1/32

L8

Band

Carrier

Freq

(MHz)

L2

Band

Carrier

Freq

(MHz)

S2

Band

Carrier

Freq

(MHz)

S1

Band

Carrier

Freq

(MHz)

F2

Band

Carrier

Freq

(MHz)

S3

Band

Carrier

Freq

(MHz)

CG

Band

Carrier

Freq

(MHz)

C2

Band

Carrier

Freq

(MHz)

C9

Band

Carrier

Freq

(MHz)

CA

Band

Carrier

Freq

(MHz)

F3

Band

Carrier

Freq

(MHz)

F4

Band

Carrier

Freq

(MHz)

X7

Band

Carrier

Freq

(MHz)

X8

Band

Carrier

Freq

(MHz)

RF

Control

1435 1700 1999 2200 2412 2400 3100 4400 4940 5000 5725 5500 6425 6875

RF

Spectrum

Inversion

OFF

RF

PWR

LVL

Transport

Stream ID

Network

ID

4

PMT

1 PID

PMT

1

Prog

Num

Video

1 PID

Video

1 PCR

PID

PMT

2 PID

PMT

2

Prog

Num

Video

2 PID

Video

2 PCR

PID

Stereo

Stream

1 PID

Stereo

Stream

2 PID

1 100 32 1 40 50 33 2 41 51 60 61

2

3

4

13

14

15

16

17

18

19

20

1/16

1/32

1/16

5 1/32

6 1/16

7 1/8

8 1/8

9 1/16

10 1/16

11 1/32

12 1/16

1/32

1/16

1/32

1/16

1/8

1/8

1/16

1/16

1485 1775 2245 2300 2437 2550 3250 4700 4965 5250 5775 5700 6475 6950

1535 1850 2462 2400 2462 2700 3400 5000 4990 5500 5825 5900 6525 7125

1435 1700 1999 2200 2412 2400 3100 4400 4940 5000 5725 5500 6425 6875

OFF

OFF

OFF

1485 1775 2245 2300 2437 2550 3250 4700 4965 5250 5775 5700 6475 6950 OFF

1535 1850 2462 2400 2462 2700 3400 5000 4990 5500 5825 5900 6525 7125 OFF

1435 1700 1999 2200 2412 2400 3100 4400 4940 5000 5725 5500 6425 6875 OFF

1485 1775 2245 2300 2437 2550 3250 4700 4965 5250 5775 5700 6475 6950 OFF

1535 1850 2462 2400 2462 2700 3400 5000 4990 5500 5825 5900 6525 7125 OFF

1435 1700 1999 2200 2412 2400 3100 4400 4940 5000 5725 5500 6425 6875 OFF

1485 1775 2245 2300 2437 2550 3250 4700 4965 5250 5775 5700 6475 6950 OFF

1535 1850 2462 2400 2462 2700 3400 5000 4990 5500 5825 5900 6525 7125 OFF

1435 1700 1999 2200 2412 2400 3100 4400 4940 5000 5725 5500 6425 6875

1485 1775 2245 2300 2437 2550 3250 4700 4965 5250 5775 5700 6475 6950

1535 1850 2462 2400 2462 2700 3400 5000 4990 5500 5825 5900 6525 7125

1435 1700 1999 2200 2412 2400 3100 4400 4940 5000 5725 5500 6425 6875

1485 1775 2245 2300 2437 2550 3250 4700 4965 5250 5775 5700 6475 6950

1535 1850 1999 2400 2462 2700 3400 5000 4990 5500 5825 5900 6525 7125

1435 1700 2245 2200 2412 2400 3100 4400 4940 5000 5725 5500 6425 6875

1485 1775 2462 2300 2437 2550 3250 4700 4965 5250 5775 5700 6475 6950

OFF

OFF

OFF

OFF

OFF

OFF

OFF

OFF

4

4

4

4

4

4

4

4

4

4

4

4

4

4

4

4

4

4

4

1 100 32 1 40 50 33 2 41 51 60 61

1 100 32 1 40 50 33 2 41 51 60 61

1 100 32 1 40 50 33 2 41 51 60 61

1 100 32 1 40 50 33 2 41 51 60 61

1 100 32 1 40 50 33 2 41 51 60 61

1 100 32 1 40 50 33 2 41 51 60 61

1 100 32 1 40 50 33 2 41 51 60 61

1 100 32 1 40 50 33 2 41 51 60 61

1 100 32 1 40 50 33 2 41 51 60 61

1 100 32 1 40 50 33 2 41 51 60 61

1 100 32 1 40 50 33 2 41 51 60 61

1 100 32 1 40 50 33 2 41 51 60 61

1 100 32 1 40 50 33 2 41 51 60 61

1 100 32 1 40 50 33 2 41 51 60 61

1 100 32 1 40 50 33 2 41 51 60 61

1 100 32 1 40 50 33 2 41 51 60 61

1 100 32 1 40 50 33 2 41 51 60 61

1 100 32 1 40 50 33 2 41 51 60 61

1 100 32 1 40 50 33 2 41 51 60 61

88 of 90 www.cobham.com/tcs

Dual Program Versions (4K Only)

Group

Index

9

10

11

12

13

14

15

16

D: 1080p29.97 &

1080p29.97

17 D: 720p59.94 & 720p59.94

18

19

20

Group Name

S: NTSC Composite

S: PAL Composite

D: 1080i/29.97 &

D: 1080i/25 & 1080i/25

D: 1080p25 & 1080p25

D: 1080psf29.97 &

D: 1080psf25 & 1080psf25

D: 720p50 & 720p50

D: NTSC Comp & NTSC

Comp

D: PAL Comp & PAL

Comp

Video bitrate allocate%

100

100

100

100

100

100

100

100

100

100

50

50

Video1

Input

Mode

SDI

SDI

SDI

SDI

SDI

SDI

SDI

SDI

CVBS_M

CVBS_M

Video2

Input

Mode

OFF

OFF

OFF

OFF

OFF

OFF

OFF

OFF

OFF

OFF

Video1 Format

1080i/29.97

(1080psf29.97)

1080i/25

(1080psf25)

1080p29.97

1080p25

1080i/29.97

(1080psf29.97)

1080i/25

(1080psf25)

720p59.94

720p50

480i/29.97

576i/25

Video2 Format

1080i/29.97

(1080psf29.97)

1080i/25

(1080psf25)

1080p29.97

1080p25

1080i/29.97

(1080psf29.97)

1080i/25

(1080psf25)

720p59.94

720p50

480i/29.97

576i/25

Stereo Stream 1

Input Mode

ANALOG

SINGLE-ENDED

LINE 1-2

ANALOG

SINGLE-ENDED

LINE 1-2

ANALOG

SINGLE-ENDED

LINE 1-2

ANALOG

SINGLE-ENDED

LINE 1-2

ANALOG

SINGLE-ENDED

LINE 1-2

ANALOG

SINGLE-ENDED

LINE 1-2

ANALOG

SINGLE-ENDED

LINE 1-2

ANALOG

SINGLE-ENDED

LINE 1-2

ANALOG

SINGLE-ENDED

LINE 1-2

ANALOG

SINGLE-ENDED

LINE 1-2

1080i/29.97 1080i/29.97

(1080psf29.97)

ANALOG

SINGLE-ENDED

LINE 1-2

ANALOG

SINGLE-ENDED

LINE 1-2 SDI

ANALOG

SINGLE-ENDED

SDI SDI 1080p29.97 1080p29.97 LINE 1-2

SDI

SDI

SDI

1080i/25

(1080psf25)

1080p25

1080i/25

(1080psf25)

1080p25

ANALOG

SINGLE-ENDED

LINE 1-2

50

50

50

50

50

SDI

SDI

SDI

SDI

SDI

SDI

1080i/29.97

1080i/25

(1080psf25)

720p59.94

720p50

CVBS_M CVBS_M 480i/29.97

CVBS_M CVBS_M 576i/25

1080i/29.97

(1080psf29.97)

1080i/25

(1080psf25)

720p59.94

720p50

480i/29.97

576i/25

ANALOG

SINGLE-ENDED

LINE 1-2

ANALOG

SINGLE-ENDED

LINE 1-2

ANALOG

SINGLE-ENDED

LINE 1-2

ANALOG

SINGLE-ENDED

LINE 1-2

ANALOG

SINGLE-ENDED

LINE 1-2

ANALOG

SINGLE-ENDED

LINE 1-2

Analog

Audio

1-2

Sample

Rate

48 KHZ

48 KHZ

48 KHZ

48 KHZ

48 KHZ

48 KHZ

48 KHZ

48 KHZ

48 KHZ

48 KHZ

48 KHZ

48 KHZ

48 KHZ

48 KHZ

48 KHZ

48 KHZ

48 KHZ

48 KHZ

48 KHZ

48 KHZ

Stereo

Stream

1

Encode

Bitrate

Stereo

Stream 2

Input

Mode

256 Kb/s OFF

256 Kb/s OFF

256 Kb/s OFF

256 Kb/s OFF

256 Kb/s OFF

256 Kb/s OFF

256 Kb/s OFF

256 Kb/s OFF

256 Kb/s OFF

256 Kb/s OFF

256 Kb/s

256 Kb/s

256 Kb/s

256 Kb/s

256 Kb/s

256 Kb/s

256 Kb/s

256 Kb/s

256 Kb/s

256 Kb/s

SINGLE-

ENDED

LINE 3-4

ANALOG

SINGLE-

ENDED

LINE 3-4

ANALOG

SINGLE-

ENDED

LINE 3-4

ANALOG

SINGLE-

ENDED

LINE 3-4

ANALOG

SINGLE-

ENDED

LINE 3-4

ANALOG

SINGLE-

ENDED

LINE 3-4

ANALOG

SINGLE-

ENDED

LINE 3-4

ANALOG

SINGLE-

ENDED

LINE 3-4

ANALOG

SINGLE-

ENDED

LINE 3-4

ANALOG

SINGLE-

ENDED

LINE 3-4

ANALOG

Analog

Audio 3-4

Sample

Rate

Stereo

Stream 2

Encode

Bitrate

Audio 1

Volume

(dB)

Audio 2

Volume

(dB)

Audio 1-2

Pair

Volume

Lock

48 KHZ

48 KHZ

48 KHZ

48 KHZ

48 KHZ

48 KHZ

48 KHZ

48 KHZ

48 KHZ

48 KHZ

256 Kb/s

256 Kb/s

256 Kb/s

256 Kb/s

256 Kb/s

256 Kb/s

256 Kb/s

256 Kb/s

256 Kb/s

256 Kb/s

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

TRUE

TRUE

TRUE

TRUE

TRUE

TRUE

TRUE

TRUE

TRUE

TRUE

Audio 1

Mic

PreAmp

Audio 2

Mic

PreAmp

Audio 3

Volume

(dB)

+16 dB

+16 dB

+16 dB

+16 dB

+16 dB

+16 dB

+16 dB

+16 dB

+16 dB

+16 dB

+16 dB

+16 dB

+16 dB

+16 dB

+16 dB

+16 dB

+16 dB

+16 dB

+16 dB

+16 dB

0

0

0

0

0

0

0

0

0

0

Audio 4

Volume

(dB)

Audio 3-4

Pair

Volume

Lock

Audio 3

Mic

PreAmp

Audio 4

Mic

PreAmp

0

0

0

0

0

0

0

0

0

0

TRUE

TRUE

TRUE

TRUE

TRUE

TRUE

TRUE

TRUE

TRUE

TRUE

+16 dB

+16 dB

+16 dB

+16 dB

+16 dB

+16 dB

+16 dB

+16 dB

+16 dB

+16 dB

+16 dB

+16 dB

+16 dB

+16 dB

+16 dB

+16 dB

+16 dB

+16 dB

+16 dB

+16 dB

Transport

Stream

Source

INTERNAL

INTERNAL

INTERNAL

INTERNAL

INTERNAL

INTERNAL

INTERNAL

INTERNAL

INTERNAL

INTERNAL

RF

Carrier

Mode

2K

CARRIER

2K

CARRIER

2K

CARRIER

2K

CARRIER

2K

CARRIER

2K

CARRIER

2K

CARRIER

2K

CARRIER

2K

CARRIER

2K

CARRIER

48 KHZ

48 KHZ

256 Kb/s

256 Kb/s

0

0

0

0

TRUE

TRUE

+16 dB

+16 dB

+16 dB

+16 dB

0

0

0

0

TRUE

TRUE

+16 dB

+16 dB

+16 dB

+16 dB

INTERNAL

4K

CARRIER

INTERNAL

4K

CARRIER

48 KHZ

48 KHZ

48 KHZ

48 KHZ

48 KHZ

48 KHZ

48 KHZ

48 KHZ

256 Kb/s

256 Kb/s

256 Kb/s

256 Kb/s

256 Kb/s

256 Kb/s

256 Kb/s

256 Kb/s

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

TRUE

TRUE

TRUE

TRUE

TRUE

TRUE

TRUE

TRUE

+16 dB

+16 dB

+16 dB

+16 dB

+16 dB

+16 dB

+16 dB

+16 dB

+16 dB

+16 dB

+16 dB

+16 dB

+16 dB

+16 dB

+16 dB

+16 dB

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

TRUE

TRUE

TRUE

TRUE

TRUE

TRUE

TRUE

TRUE

+16 dB

+16 dB

+16 dB

+16 dB

+16 dB

+16 dB

+16 dB

+16 dB

+16 dB

+16 dB

+16 dB

+16 dB

+16 dB

+16 dB

+16 dB

+16 dB

INTERNAL

4K

CARRIER

INTERNAL

4K

CARRIER

INTERNAL

4K

CARRIER

INTERNAL

4K

CARRIER

INTERNAL

4K

CARRIER

INTERNAL

4K

CARRIER

INTERNAL

2K

CARRIER

INTERNAL

2K

CARRIER

100-M0171X2

GMS Inc. doing business as Cobham Tactical Communications and Surveillance

89 of 90 www.cobham.com/tcs

100-M0171X2

GMS Inc. doing business as Cobham Tactical Communications and Surveillance

Group

Index

COFDM

Mod

Mode

COFDM

BW

COFDM

FEC

COFDM

Guard

Interval

1 1/32

L8

Band

Carrier

Freq

(MHz)

L2

Band

Carrier

Freq

(MHz)

S2

Band

Carrier

Freq

(MHz)

S1

Band

Carrier

Freq

(MHz)

F2

Band

Carrier

Freq

(MHz)

S3

Band

Carrier

Freq

(MHz)

CG

Band

Carrier

Freq

(MHz)

C2

Band

Carrier

Freq

(MHz)

C9

Band

Carrier

Freq

(MHz)

CA

Band

Carrier

Freq

(MHz)

F3

Band

Carrier

Freq

(MHz)

F4

Band

Carrier

Freq

(MHz)

X7

Band

Carrier

Freq

(MHz)

X8

Band

Carrier

Freq

(MHz)

RF

Control

1435 1700 1999 2200 2412 2400 3100 4400 4940 5000 5725 5500 6425 6875

RF

Spectrum

Inversion

OFF

RF

PWR

LVL

Transport

Stream ID

Network

ID

4

PMT

1 PID

PMT

1

Prog

Num

Video

1 PID

Video

1 PCR

PID

PMT

2 PID

PMT

2

Prog

Num

Video

2 PID

Video

2 PCR

PID

Stereo

Stream

1 PID

Stereo

Stream

2 PID

1 100 32 1 40 50 33 2 41 51 60 61

2

3

4

13

14

15

16

17

18

19

20

1/16

1/32

1/16

5 1/32

6 1/16

7 1/8

8 1/8

9 1/16

10 1/16

11 1/32

12 1/16

1/32

1/16

1/32

1/16

1/8

1/8

1/16

1/16

1485 1775 2245 2300 2437 2550 3250 4700 4965 5250 5775 5700 6475 6950

1535 1850 2462 2400 2462 2700 3400 5000 4990 5500 5825 5900 6525 7125

1435 1700 1999 2200 2412 2400 3100 4400 4940 5000 5725 5500 6425 6875

OFF

OFF

OFF

1485 1775 2245 2300 2437 2550 3250 4700 4965 5250 5775 5700 6475 6950 OFF

1535 1850 2462 2400 2462 2700 3400 5000 4990 5500 5825 5900 6525 7125 OFF

1435 1700 1999 2200 2412 2400 3100 4400 4940 5000 5725 5500 6425 6875 OFF

1485 1775 2245 2300 2437 2550 3250 4700 4965 5250 5775 5700 6475 6950 OFF

1535 1850 2462 2400 2462 2700 3400 5000 4990 5500 5825 5900 6525 7125 OFF

1435 1700 1999 2200 2412 2400 3100 4400 4940 5000 5725 5500 6425 6875 OFF

1485 1775 2245 2300 2437 2550 3250 4700 4965 5250 5775 5700 6475 6950 OFF

1535 1850 2462 2400 2462 2700 3400 5000 4990 5500 5825 5900 6525 7125 OFF

1435 1700 1999 2200 2412 2400 3100 4400 4940 5000 5725 5500 6425 6875

1485 1775 2245 2300 2437 2550 3250 4700 4965 5250 5775 5700 6475 6950

1535 1850 2462 2400 2462 2700 3400 5000 4990 5500 5825 5900 6525 7125

1435 1700 1999 2200 2412 2400 3100 4400 4940 5000 5725 5500 6425 6875

1485 1775 2245 2300 2437 2550 3250 4700 4965 5250 5775 5700 6475 6950

1535 1850 1999 2400 2462 2700 3400 5000 4990 5500 5825 5900 6525 7125

1435 1700 2245 2200 2412 2400 3100 4400 4940 5000 5725 5500 6425 6875

1485 1775 2462 2300 2437 2550 3250 4700 4965 5250 5775 5700 6475 6950

OFF

OFF

OFF

OFF

OFF

OFF

OFF

OFF

4

4

4

4

4

4

4

4

4

4

4

4

4

4

4

4

4

4

4

1 100 32 1 40 50 33 2 41 51 60 61

1 100 32 1 40 50 33 2 41 51 60 61

1 100 32 1 40 50 33 2 41 51 60 61

1 100 32 1 40 50 33 2 41 51 60 61

1 100 32 1 40 50 33 2 41 51 60 61

1 100 32 1 40 50 33 2 41 51 60 61

1 100 32 1 40 50 33 2 41 51 60 61

1 100 32 1 40 50 33 2 41 51 60 61

1 100 32 1 40 50 33 2 41 51 60 61

1 100 32 1 40 50 33 2 41 51 60 61

1 100 32 1 40 50 33 2 41 51 60 61

1 100 32 1 40 50 33 2 41 51 60 61

1 100 32 1 40 50 33 2 41 51 60 61

1 100 32 1 40 50 33 2 41 51 60 61

1 100 32 1 40 50 33 2 41 51 60 61

1 100 32 1 40 50 33 2 41 51 60 61

1 100 32 1 40 50 33 2 41 51 60 61

1 100 32 1 40 50 33 2 41 51 60 61

1 100 32 1 40 50 33 2 41 51 60 61

90 of 90 www.cobham.com/tcs

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals