Kenroy Home 32093ORB Bulletin 59 in. Oil Rubbed Bronze Floor Lamp Instructions

MODEL: 520950КВ
PACKING DIAGRAM
= CARDBOARD
= SHADE
NN
.CA TITLE 20 =
—_ CARDBOARD
NY
BASE
Y
SOCKET ASSEMBLY
+ [~ (2 PCS)
FINIAL, STEM & _
RUBBER RT
CO Y
Pw,
— —_
ASSEMBLY INSTRUCTIONS
READ AND SAVE THESE INSTRUCTIONS
READ INSTRUCTIONS ALL THE WAY THROUGH PRIOR TO
ASSEMBLY.
THIS LAMP SHOULD TAKE APPROXIMATELY 10 MINUTES TO
ASSEMBLE.
MAKE SURE ALL PARTS ARE FIRMLY TIGHTENED.
UNPACK THE LAMP
YOU SHOULD HAVE RECEIVED THE FOLLOWING PARTS IN THE
PACKAGE: FINIAL, RUBBER WASHER, SHADE, STEM, SOCKET
ASSEMBLY, (2) POLES AND BASE. TO PROTECT THE FINISH,
PLACE ALL PARTS ON A SOFT SURFACE.
ASSEMBLE THE LAMP
[|= FINIAL
7 RUBBER
> WASHER
SHADE
_ 32092SHORB
(REPLACEMENT
PART)
|]
STEM—|
| SOCKET
: (2 PCS)
SOCKET
ASSEMBLY
ULL CHAIN
SWITCH
~ UPPER POLE
~ LOWER POLE
1. CAREFULLY ORGANIZE AND PLACE ALL PARTS ON A SMOOTH,
FLAT SURFACE. LINE UP ALL OF THE PARTS ACCORDING TO
THE ASSEMBLY DIAGRAM.
2. SCREW LOWER POLE TO TOP OF BASE.
3. SCREW UPPER POLE TO BOTTOM OF SOCKET ASSEMBLY.
4. PULL THE EXCESS POWER CORD THROUGH BASE.
5. SCREW UPPER POLE TO TOP OF LOWER POLE.
6. SCREW STEM TO TOP OF SOCKET ASSEMBLY.
7. PLACE SHADE OVER THE STEM, THEN SECURE WITH RUBBER
WASHER AND FINIAL.
8. PRIOR TO INSTALLING THE BULBS, PLEASE INSPECT SOCKETS
FOR SILICA PACKET. IF PACKET IS PRESENT, REMOVE AND
THROW AWAY. DO NOT EXPOSE TO CHILDREN AND PETS.
9. INSTALL A 120V, 60HZ, 75 WATT MAXIMUM MEDIUM BASE
TYPE “A” BULB (NOT INCLUDED) INTO EACH SOCKET.
10. PLUG THE POWER CORD INTO AN OUTLET AND TURN ON
AT SWITCH.
BULB REPLACEMENT
AVAILABLE PART IS:
32093SHORB (SHADE)
BASE——
1. BEFORE REPLACING THE BULB, BE SURE THAT THE SHADE
AND BULB ARE COOL AND LAMP IS UNPLUGGED.
2. UNSCREW EXISTING BULB FROM SOCKET AND REPLACE WITH
A NEW BULB. PLUG POWER SUPPLY CORD BACK INTO OUTLET.
TROUBLE SHOOTING
1. IF YOUR LAMP DOES NOT LIGHT, CHECK PLUG AT THE
OUTLET. MAKE SURE THE PLUG IS FULLY AND PROPERLY
INSERTED INTO THE POWER OUTLET.
2. IF LAMP STILL DOES NOT LIGHT, UNPLUG FROM OUTLET.
CHECK THE BULB FOR A BROKEN FILAMENT. REPLACE BULB IF
NECESSARY, PLUG IN LAMP AND TURN IT ON.
3. IF THE LAMP STILL DOES NOT LIGHT, PLEASE CONTACT
YOUR DISTRIBUTOR OR PLACE OF PURCHASE.
IMPORTANT SAFETY INSTRUCTIONS
CLEANING THE LAMP
CLEAN THE LAMP WITH A SOFT, DRY CLOTH. DO NOT
USE ANY CLEANERS WITH CHEMICALS, SOLVENTS, OR
HARSH ABRASIVES.
10/2017
THIS PORTABLE LAMP HAS A POLARIZED PLUG (ONE BLADE IS
WIDER THAN THE OTHER) AS A FEATURE TO REDUCE THE RISK
OF ELECTRIC SHOCK. THIS PLUG WILL FIT IN A POLARIZED
OUTLET ONLY ONE WAY. IF THE PLUG DOES NOT FIT FULLY IN
THE OUTLET, REVERSE THE PLUG. IF IT STILL DOES NOT FIT,
CONTACT A QUALIFIED ELECTRICIAN. NEVER USE WITH AN
EXTENSION CORD UNLESS PLUG CAN BE FULLY INSERTED. DO
NOT ALTER THE PLUG.
320930RB INSTRUCTIONS