assembly method

ASSEMBLY METHOD
8
ARMREST DISASSEMBLY METHOD
SAFETY INTRODUCTION
ILLUSTRATION
Women who are pregnant or menstruating
are
2
13
SAFETY INTRODUCTION
MAINTENANCE
If b
diluted liquid soap solution to wipe the chair.
.
Prolonged
with
lost
If water is spilled on the machine,c
s
d
3
12
CONTROLLER INSTRUCTION
PREPARATION BEFORE MASSAGE
Controller
Kneading,knocking,
kneading & knocking
tapping,shiatsu,flaping
Time
Body detecting
Airbage strength
Width adjust
Massage area
Backrest & footrest
position adjust
Auto mode I
(Energy auto mode)
On/Off key
Auto mode II
( Stretch auto mode)
Auto mode III
Time adjust key
Airbag auto key
(Relax auto mode)
Leg raised key
Roller move up
Speed increase key
Backres raise,
leg decline key
Backrest recline
leg raise key
Auto reset key
Speed decrease key
Leg decline key
Roller move down
Roller adjust key
Airbage strength key
3 level Z-Gravity key
(fixed,partial,overall)
Partial airbag massage
Massage technique
Width adjust key
Heating key
foot roller key
Seat vibration key
5
10
PREPARATION BEFORE USE
ON/OFF key: Press this button,5 minutes full body massage rapid experience automatically start.
Auto mode I : Energy auto mode, rhythmic massage benefits accelerating body metabolism.
Press again to close the mode
Time adjust key : During massage, press this button to change time in 15 minutes、20 minutes、
30 minutes in sequence.
Airbag auto key: Press this button, full body airbag massage function start .
Armrest disassembly method
A.Assembly the armrest when backrest is erect. C.Fix the screws
Pls according to the A,B,C order to assemble (After the screws fixed,
inset the screw and tighten the screws)
B.The armrest shaft assemble.
(Insert the two iron shafts
into the corresponding hole of base)
Auto mode II: Stretch auto mode,based on normal massage types, combine stretching method ,
to relieve whole body meridian. Press again to close the mode.
A uto mode III : Relax auto mode, the whole body relieving massage mode,
combined different strength and speed, suitable for alleviating fatigue.
Press again to close the mode.
Speed increase key: total of 3 level in sequence.
Leg raised key: Press this button to raise calfrest,press again to stop.
Roller move up : Press this button to raise back massage unit press again
to stop.
Backrest recline, leg raise key: Press this button to lower backrest and raise calfrest.
A.Connect the armrest airbag tube
according the color
Press again to stop.
Roller move down : Press this button to lower back massage unit press again
to stop.
Massage chair setting method
Auto reset: Press this button for calfrest and backrest to return to default positions.
Leg decline key: Press this button to lower calfrest,press again to stop.
Backrest raise,leg decline key: Press this button to lower calfrest and raise backrest ,
Press again to stop.
Speed decrease: total of 3 levels.
Remark: When the backrest is low and
calfrest is raised, there need more than
50cm space in front and more than 10cm
space behind the chair to avoid crash.
More than 50cm
More than 10cm
Remark: Suggest roll out a base wad
under the chair to avoid damage of the
ground and carpet.
Airbag strength key: 3 levels in sequence.
3 level Z-Gravity key:Press this button for 3 adjustments of zero gravity.
Roller adjust: Roller adjustment activate button. press this
(point,part,overall)
Around the massage chair should has enough space, and lay on smooth ground
button before press
Remark: To avoid leather damage or
color change, please don’t put the
chair to the sun or in high temperature
place.
Erect position
Width adjust key: Press this button to adjust the back massage unit
(wide , medium, narrow) 3 kind of width.
Massage technique: Kneading , knocking, kneading and knocking, pressing ,
tapping, shiatsu.6 kind of massage technique adjustment.
Partial airbag massage : Armrest ,seat, leg air bag massage adjustment.
Heating : Press button to start, press again to stop.
Seat vibration: Press button to start, total 3 levels of speed in sequence.
Foot roller massage: total 3 levels of speed in sequence.
6
Laying position
Massage chair moving method
Lift the backrest and push the whole chair by hands
Attentions
1.Don’t move it with people or object on it, in case of turnover.
2.Don’t move the chair or drag wheels on ground that is
easy to scratch.
3.Please don’t take up the seat part, leg part and shoulder
part when moving the chair.
4.Please notice its weight when lifting the calfrest.
9
Tilt the front part
of massage chair
Wheels
PRODUCT INSTALLATION
ASSEMBLY METHOD
Massage chair and components
Massage chair
Accessories
Back cushion
Armrest unit
Controller
Shoulder installation method
Right
A.Air tube connection
Shoulder massager
(after air tube connected, and
put the air tube into the hole
of backrest,in case the air tube
folded in using )
Back cushion
Zipper
Seat cushion
Shoulder massager
Right
Backrest cushion installation method
Left
Left
Board inside
Remark
Remark
Assemble the other side in the same way.
Disassemble according the installation method.
Please use the appointed spare parts in the carton.
B.Shoulder axle connection
(put shoulder shaft into the groove of backrest vertically)
Backrest assembly and fold method
Seat cushion installation method
Press the locking structure under the
backrest(Part inside the circle),and
push backrest forward.
* Please notice: do not fold the chair
suddenly.
* Please do not lower the backrest when
the chair’s shoulder and armrest are
installed.
Lift the backrest follow the arrow direction,
and make sure the locking structure(part
inside the circle) is fixed (you should hear
a clicking sound)
* Notice: lift up softly and fold slowly.
Vibrating wire
connection
Air tube connection
Seat cushion zipper
Fix
Disassembly
Controller installation method
Connect both end of controller 1
(*Notice inside groove matched)
Fuse holder
Power switch
Chock structure
Chock structure
Anti - loose plastic thread cap 2
Controller jack
*After the controller connecting,screw
on the anti-loose plastic thread cap.
(Tighten in clockwise, loosen in
anti-clockwise)
Power jack
7
8