AEB-GM45
User’s Manual
Intel GM45, Mini-ITX
Rev.01, Sep. 2009
Statement
All rights reserved. No part of this publication may be reproduced in any form or by
any means, without prior written permission of the publisher.
All trademarks are the properties of the respective owners.
All product specifications are subject to change without prior notice.
Packing List
□
□
□
□
□
□
1 x System board
1 x Driver CD (Include user’s manual)
1 x I/O Shield
1 x Serial ATA data cable
1 x RS-232 cable(1 Port)
1 x USB cable(2 Port)
AEB-GM45 User’s Manual
2
Contents
Chapter 1 Product Information..........................................................................................4
1.1 Block Diagram...................................................................................................................4
1.2 Features .............................................................................................................................5
1.3 PCB Layout .......................................................................................................................7
1.4 Jumper Setting ..................................................................................................................8
1.5 Connector Function List...................................................................................................9
1.6 Internal Connector Pin Define ......................................................................................10
Chapter 2 BIOS Setup ........................................................................................................16
2.1 Main Menu .......................................................................................................................16
2.2 Standard CMOS Features.............................................................................................17
2.3 Advanced BIOS Features..............................................................................................18
2.4 Advanced Chipset Features..........................................................................................21
2.5 Integrated Peripherals ...................................................................................................23
2.6 Power Management Setup ...........................................................................................28
2.7 PnP/PCI Configurations.................................................................................................31
2.8 PC Health Status ............................................................................................................32
2.9 Frequency/Voltage Control............................................................................................33
2.10 Load Fail-Safe Defaults...............................................................................................34
2.11 Load Optimized Defaults .............................................................................................35
2.12 Set Supervisor Password............................................................................................36
2.13 Set User Password ......................................................................................................37
2.14 Save & Exit Setup ........................................................................................................38
2.15 Exit Without Saving ......................................................................................................39
Chapter 3 Drivers Installation ..........................................................................................40
3.1 Intel Chipset Device Software ......................................................................................40
3.2 Intel Graphic Media Accelerator Driver .......................................................................43
3.3 LAN Driver .......................................................................................................................46
3.4 Audio Driver .....................................................................................................................48
3.5 Intel High Definition Audio HDMI Driver ......................................................................49
Appendix-A Watchdog .......................................................................................................52
Appendix-B GPIO ................................................................................................................52
AEB-GM45 User’s Manual
3
Chapter 1 Product Information
This chapter introduces the product features, jumper and connector information.
1.1 Block Diagram
Intel Penryn
IMVP6
CK505
FSB 667/800/1033 MHz
VGA
(DDR2 667/800 MHz)
Intel GM45
HDMI
Channel A
DDR2(SO-DIMM)
Channel B
TV-Out
(YPbPr, S-Video)
DDR2(SO-DIMM)
DMI
SATA x4
USB x8
SATA
HDA
USB
PCI
Intel ICH9M
uSSD
Mini PCI-E
PCI-Ex1 x1
LAN_RTL8111C
IEEE1394
SPI
PCI-E
PCI
SPI
LPC
S/IO W83627EHG
KB/MS
AEB-GM45 User’s Manual
CODEC_ALC888
4
Printer
DIO
COM1
IrDA
1.2 Features
Processor
Intel Socket-P processor, Intel
Pentium Dual Core and Celeron
mobile processors on 45 nm, Intel
Celeron T1700, T1600, 585 and 575
processors on 65 nm
FSB
667/800/1066 MHz
Chipset
Intel GM45/GL40 + ICH9M
BIOS
AWARD 16Mb SPI
Technology
DDR2 667/800 SDRAM
Max. Capacity
Up to 4GB
Socket
2 x SO-DIMM (Bottom)
Chipset
Intel GM45 integrated
GMA4500MHD
VRAM
Intel DVMT 5.0
VGA
Resolution
VGA: Up to QXGA
HDMI
Resolution
Video support for CEA modes 480i/p,
576i/p, 720p, 1080i/p and PC modes
though dot clock
TV-Out
HDTV graphics mode support
Dual Display
VGA+LVDS, VGA+HDMI, TV+HDMI
Interface
10/100/1000 Mbps
Controller
Realtek RTL8111C
Interface
High Definition Audio
Controller
Realtek ALC888 HD CODEC
Max. Data
Transfer Rates
300 MB/s
Port
4
PCI-E x1
1
PCI
1
Mini PCI-E
1
System
Processor / Chipset
Memory
Display
Ethernet
Audio
SATA
Expansion Slot
AEB-GM45 User’s Manual
5
IEEE 1394A
1
USB 2.0
4
Internal Connecror COM
Rear I/O
Power
Watchdog Timer
Environment
Form Factor
1
Audio Header
1
IrDA
1
VGA
1
LAN
1
USB 2.0
4
IEEE 1394A
1
Audio
6 (MIC.-In, Line-In, Line-Out,
Cen-Out, LFE-Out, Surround-Out,
Sidesurround1- Out), S/PDIF with
RCA Jack
HDMI
1
S-Video
1
Component
Port
1 (Y, Pb, Pr)
Type
ATX (20 Pin)
Interval
Programmable 1 ~ 255 sec./min.
Output
System reset
Operating
Temp.
-5°C ~ 60°C (23°F ~ 140°F)
Storage Temp.
-20°C ~ 80°C (-4°F ~ 176°F)
Relative
Humidity
0%~ 95% (non-condensing)
Dimension
(L x W)
Mini-ITX (170mm x 170mm)
(6.69” x 6.69”)
AEB-GM45 User’s Manual
6
1.3 PCB Layout
J1
J3
1
CPUFAN
2
1
11
RESET1
18 17 19
12
11
J4
ATX1
4
2
1
4
1
J5
10
5
15
20
10
5
VGA1
2
11
1
6
6
3
J6
J7
4
2
3
5
1
J9
J8
6
CN1
J25
(Bottom Side)
U5
U1
J10
U8
U4
J12
22
J26
(Bottom Side)
18
21
5
17
1
2
10
1
9
CN4
CN2
52
16 18
8
4
20
2
10
9
J11
9
1
17
51
19
4
7
7
1
2
1
B1
A1
2
C2
4
A2
CN7
J16
2
6
10
C1
1
J19
2
9
2
1
CN6
16
10
10
9
2
J21
9 1
JBAT1
15
1
PCI1
J23
2
8
1
7
J22
JP1
AEB-GM45 User’s Manual
J14
1
A3
C5
1
7
CN3
1
A4
B2
C3
J20
8
7
D1
B3
1
7
D2
B4
F1 C4
E1
F2
J18 J17
4
D3
2
CN8
4
D4
J13
J15
1
10
19
20
E2
C0
E3
F3
E4
F4
CN5
15
1
7
J24
1.4 Jumper Setting
JBAT1:CMOS Clear
Pin No.
Function
1-2
2-3
Normal Operation (Default)
Clear CMOS Contents
Jumper
Setting
1 2 3
1 2 3
J6, J7, J8:FSB Frequency Select
Frequency
By CPU
(Default)
667
800
1 2 3
1 2 3
1 2 3
1 2 3
1 2 3
1 2 3
1 2 3
1 2 3
1 2 3
1 2 3
1 2 3
1 2 3
J6
J7
J8
AEB-GM45 User’s Manual
8
1066
1.5 Connector Function List
Connector
Function
ATX1
ATX Power 20 Pin Connector
CN1
IEEE1394A Internal Connector
CN2
RJ-45 and USB x2 Connector
CN3,CN4,CN6,
CN7
SATA Connector
CN5
Audio Connector
CN8
Internal Keyboard and Mouse Connector
CPUFAN
CPU Fan 4Pin Connector
J1
System Fan 3Pin Connector
J3
+3.3V, +5V, +12V Connector
J4
HDMI Connector
J5
Component (Y, Pb, Pr) Connector
J9
S-Video and S/PDIF Connector
J10
IEEE1394A and USBX2 Connector
J11
Mini PCI-E Connector
J12
Internal USB Connector (for uSSD)
J13
Front Panel Audio Connector
J14
Internal USB Connector
J15
Audio 7.1 Channels Connector
J17
Internal COM1 Connector
J18
Auxiliary Thermal Sensor Connector
J19
IR Connector
J21
Front Panel Connector
J23
Mini PCI-E Slot
J24
Internal USB Connector
J25, J26
DDR2 SO-DIMM Connector (Bottom)
JP1
Digital IO Connector
PCI1
PCI Slot
RESET1
Reset Button
VGA1
CRT Connector
AEB-GM45 User’s Manual
9
Note
1.6 Internal Connector Pin Define
CN1:IEEE1394A Connector with Pin-header (2.0 mm)
Pin No.
Signal
1
+12V
2
Ground
3
TPB1-
4
TPB1+
5
TPA1-
6
TPA1+
7
Ground
8
Ground
CN8:Internal Keyboard and Mouse Connector with Box-header (2.0 mm)
Pin No.
Signal
1
+5V
2
MDAT
3
MCLK
4
KDAT
5
KCLK
6
Ground
CPUFAN:CPU 4Pin FAN Connector
Pin No.
Signal
1
Ground
2
Fan Power (+12V)
3
Speed Sense
4
Control
J1:System FAN 3Pin Connector
Pin No.
Signal
1
Ground
2
Fan Power (+12V)
3
Speed Sense
AEB-GM45 User’s Manual
10
J3:Power Connector with Pin-header (2.54 mm)
Pin No.
Signal
Pin No.
Signal
1
+12V
2
+12V
3
Ground
4
Ground
5
+5V
6
+5V
7
Ground
8
Ground
9
+3.3V
10
+3.3V
11
Ground
12
NC
AEB-GM45 User’s Manual
11
J11:Mini PCI-E Connector
Pin No.
Signal
Pin No.
Signal
1
WAKE#
2
+3.3V
3
Reserved
4
Ground
5
Reserved
6
+1.5V
7
CLKREQ#
8
Reserved
9
Ground
10
Reserved
11
REFCLK-
12
Reserved
13
REFCLK+
14
Reserved
15
Ground
16
Reserved
17
Reserved
18
Ground
19
Reserved
20
Reserved
21
Ground
22
PERST#
23
PER_N0
24
+3V_AUX
25
PER_P0
26
Ground
27
Ground
28
+1.5V
29
Ground
30
SMB_CLK
31
PET_N0
32
SMB_DATA
33
PET_P0
34
Ground
35
Ground
36
USB_D-
37
Reserved
38
USB_D+
39
Reserved
40
Ground
41
Reserved
42
LED_WWAN#
43
Reserved
44
LED_WLAN#
45
Reserved
46
LED_WPAN#
47
Reserved
48
+1.5V
49
Reserved
50
Ground
51
Reserved
52
+3.3V
AEB-GM45 User’s Manual
12
J12:Internal USB Connector (for uSSD)
Pin No.
Signal
Pin No.
Signal
1
USB Power (+5V)
2
NC
3
USB DATA8-
4
NC
5
USB DATA8+
6
NC
7
Ground
8
NC
9
NC
10
NC
J13:Front Panel Audio Connector with Pin-header (2.0 mm)
Pin No.
Signal
Pin No.
Signal
1
USB Power (+5V)
2
NC
3
USB DATA8-
4
NC
5
USB DATA8+
6
NC
7
Ground
8
NC
9
NC
10
NC
J14:Internal USB Connector with Pin-header (2.0 mm)
Pin No.
Signal
Pin No.
Signal
1
USB Power (+5V)
2
Ground
3
USB DATA6-
4
USB DATA7+
5
USB DATA6+
6
USB DATA7-
7
Ground
8
USB Power (+5V)
J15:Audio 7.1 Channels Connector with Pin-header (2.0 mm)
Pin No.
Signal
Pin No.
Signal
1
Line1-L_OUT
2
Line1-JD
3
Line1-R_OUT
4
Ground
5
Front-L_OUT
6
Front-JD
7
Front-R_OUT
8
Ground
9
CEN_OUT
10
CEN_JD
11
LFE_OUT
12
Ground
13
Surround-L_OUT
14
Surround-JD
15
Surround-R_OUT
16
Ground
17
Side Surround-L_OUT
18
Side Surround-JD
19
Side Surround-R_OUT
20
Ground
AEB-GM45 User’s Manual
13
J17:Serial Port with Pin-header (2.0 mm)
Pin No.
Signal
Pin No.
Signal
1
DCD
2
DSR
3
RXD
4
RTS
5
TXD
6
CTS
7
DTR
8
RI/+5V/+12V
9
Ground
10
RI/+5V/+12V
J18:Auxiliary Thermal Sensor Connector (2.54 mm)
Pin No.
Signal
1
AUXTIN
2
Ground
J19:IR Connector with Pin-header (2.54 mm)
Pin No.
Signal
1
+5V
2
NC
3
IR-RX
4
Ground
5
IR-TX
J21:Front Panel Connector with Pin-header (2.54mm)
Pin No.
Signal
Pin No.
Signal
1
Power LED+ [+5V (330 Ohm)]
2
HDD LED+ [+5V (330 Ohm)]
3
Power LED- (Ground)
4
HDD LED-
5
Standby LED+ (+3.3V_Dual)
6
Power Switch+
7
Speaker Out+ (+5V)
8
Power Switch- (Ground)
9
+5V_Dual (470 Ohm)
10
SYSRESET+
11
Speaker Out-
12
SYSRESET- (Ground)
13
S1_LED+ [+5V (330 Ohm)]
14
QRT
15
S1_LED-
16
Ground
AEB-GM45 User’s Manual
14
J24:Internal USB Connector with Pin-header (2.0 mm)
Pin No.
Signal
Pin No.
Signal
1
USB Power (+5V)
2
NC
3
USB DATA4-
4
USB DATA5+
5
USB DATA4+
6
USB DATA5-
7
Ground
8
USB Power (+5V)
JP1:Digital Connector with Pin-header (2.0 mm)
Pin No.
Signal
Pin No.
Signal
1
Ground
2
+5V
3
Digital IO In 0
4
Digital IO Out 0
5
Digital IO In 1
6
Digital IO Out 1
7
Digital IO In 2
8
Digital IO Out 2
9
Digital IO In 3
10
Digital IO Out 3
AEB-GM45 User’s Manual
15
Chapter 2 BIOS Setup
This chapter introduces BIOS setup information.
Power on or reboot the system board, when screen appear
“Press DEL to enter SETUP“, Press <DEL> key to enter BIOS SETUP Utility.
Note: The BIOS configuration for reference only, it may subject to change without
prior notice.
2.1 Main Menu
Please use arrow keys to select item, then press <Enter> key to accept or enter the
sub-menu.
Phoenix – AwardBIOS CMOS Setup Utility
Standard CMOS Features
Frequency / Voltage Control
Advanced BIOS Features
Load Fail-Safe Defaults
Advanced Chipset Features
Load Optimized Defaults
Integrated Peripherals
Set Supervisor Password
Power Management Setup
Set User Password
PnP/PCI Configurations
Save & Exit Setup
PC Health Status
Exit Without Saving
Esc : Quit
↑↓ ← → : Select Item
F10 : Save & Exit Setup
Time, Date, Hard Disk Type…
AEB-GM45 User’s Manual
16
2.2 Standard CMOS Features
Phoenix – AwardBIOS CMOS Setup Utility
Standard CMOS Features
Date (mm:dd:yy)
Time (hh:mm:ss)
Item Help
Fri. May 29 2009
10 : 2 : 28
Menu Level
IDE Channel 0 Master
IDE Channel 1 Master
IDE Channel 2 Master
IDE Channel 2 Slave
IDE Channel 3 Master
IDE Channel 3 Slave
[
[
[
[
[
[
Video
Halt On
[ EGA / VGA ]
[ All , But Keyboard ]
Base Memory
Extended Memory
Total Memory
None ]
None ]
None ]
None ]
None ]
None ]
639K
978944K
979968K
↑↓→ ← :Move Enter:Select +/-/PU/PD:Value
F5: Previous Values
Change the day, month,
year and century
F10:Save
F6: Fail-Safe Defaults
□ Date
Set system date.
□ Time
Set system time.
□ IDE Channel 0/1/2/3 Master
Press <Enter> for IDE device automatic detection.
□ IDE Channel /2/3 Slave
Press <Enter> for IDE device automatic detection.
□ Video
Select Video device type.
AEB-GM45 User’s Manual
17
ESC:Exit
F1: General Help
F7: Optimized Defaults
□ Halt on
Select stop procedure or ignore when error detected during POST (Power On Self
Test).
2.3 Advanced BIOS Features
Phoenix – AwardBIOS CMOS Setup Utility
Advanced BIOS Features
x
x
CPU Feature
Hard Disk Boot Priority
Virus Warning
CPU L1 & L2 Cache
CPU L3 Cache
Quick Power On Self Test
First Boot Device
Second Boot Device
Third Boot Device
Boot Other Device
Boot Up NumLock Status
Gate A20 Option
Typematic Rate Setting
Typematic Rate (Chars/Sec)
Typematic Delay (Msec)
Security Option
APIC Mode
MPS Version Control For OS
OS Select For DRAM > 64MB
Report No FDD For Win 95
Small Logo(EPA) Show
[ Press Enter ]
[ Press Enter ]
[ Disabled ]
[ Enabled ]
[ Enabled ]
[ Enabled ]
[ USB-CDROM ]
[ Hard Disk ]
[ USB-FDD ]
[ Enabled ]
[ On ]
[ Fast ]
[ Disabled ]
6
250
[ Setup ]
[ Enabled ]
[ 1.4 ]
[ Non-OS2 ]
[ No ]
[ Disabled ]
▲
Item Help
Menu Level
▼
↑↓→ ← :Move Enter:Select +/-/PU/PD:Value
F5: Previous Values
F10:Save
F6: Fail-Safe Defaults
□ CPU Feature
Press <Enter> to select CPU parameter.
□ Hard Disk Boot Priority
Press <Enter> to select Hard Disk boot device priority.
□ Virus Warning
Select “Virus Warning” Enabled/Disabled.
□ CPU L1 & L2 Cache
Select “CPU L1 & L2 Cache” Enabled/Disabled.
AEB-GM45 User’s Manual
18
ESC:Exit
F1: General Help
F7: Optimized Defaults
□ CPU L3 Cache
Select “CPU L3 Cache” Enabled/Disabled.
□ Quick Power On Self Test
Select “Quick Power On Self Test” Enabled/Disabled.
□ First/Second/Third Boot Device
Select boot device priority.
□ Boot Other Device
Select “Boot Other Device” Enabled/Disabled.
□ Boot Up NumLock Status
Select <NumLock> key ON/Off when system boot up.
□ Gate A20 Option
Select Gate A20 controlled by Keyboard controller (Normal) or Port 92 (Fast).
□ Typematic Rate Setting
Select “Typematic Rate Setting” Enabled to set,
Typematic Rate (Chars/Sec): Number of characters repeated in one second.
Typematic Delay (Msec): When holding one key, set the time between the first and
second character displayed.
□ Security Option
Select security mode,
Setup: Require password to permit BIOS setup utility.
System: Require password to permit boot-up and BIOS setup utility.
□ APIC Mode
Select APIC (Advanced Programmable Interrupt Controller) Enabled/Disabled.
□ MPS Version Control For OS
Select MPS (Multiprocessor Specification) Version 1.4 to added extended
configuration tables to improve support for multiple PCI bus configurations and
improve future expandability. It is also required for a secondary PCI bus to work
without the need for a bridge. Select Version 1.1 for older Operating Systems.
AEB-GM45 User’s Manual
19
□ OS Select For DRAM > 64M
Select “OS2” only if you are running older version of IBM OS/2 Operating System with
greater than 64MB of RAM on the system. Otherwise select “Non-OS/2” setting.
□ Report No FDD For WIN 95
If running Windows 95/98 without floppy disk drive, select “Enabled” to release IRQ6.
This is required to pass Windows 95/98's SCT test. If select “Disabled”, BIOS will not
report missing floppy drive to Win95/98.
□ Small Logo(EPA) Show
Select EPA (Environmental Protection Agency) Energy Star logo appears during the
system boot-up process.
AEB-GM45 User’s Manual
20
2.4 Advanced Chipset Features
Phoenix – AwardBIOS CMOS Setup Utility
Advanced Chipset Features
System BIOS Cacheable
Memory Hole At 15M-16M
PCI Express Root Port Func
VT-d
[ Enabled ]
[ Disabled ]
[ Press Enter ]
[ Disabled ]
** VGA Setting **
PEG/Onchip VGA Control
PEG Force X1
On-Chip Frame Buffer Size
DVMT Mode
Total GFX Memory
PAVP Mode
[ Auto ]
[ Disabled ]
[ 64MB ]
[ Enabled ]
[ 128MB ]
[ PAVP-Lite ]
** VGA Boot Device Setting
Boot Display
TV1 Standard Type
TV2 Standard Type
BIA Control
**
[ VBIOS Default ]
[ VBIOS Default ]
[ VBIOS Default ]
[ Auto ]
↑↓→ ← :Move Enter:Select +/-/PU/PD:Value
F5: Previous Values
Item Help
Menu Level
F10:Save
F6: Fail-Safe Defaults
ESC:Exit
F1: General Help
F7: Optimized Defaults
□ System BIOS Cacheable
Select Enabled to caching of the system BIOS at F0000h-FFFFFh, resulting in better
system performance. However, if any program is written to this memory area, the
system error may result.
□ Memory Hole At 15M-16M
Select Enabled to improve performance, certain space in memory can be reserved for
ISA cards. The memory must be mapped into the memory space below 16 MB.
□ PCI Express Root Port Func
Press <Enter> to setting PCI Express function.
□ VT-d
Select VT-d(Virtualization Technology for Directed I/O) Enabled/Disabled.
AEB-GM45 User’s Manual
21
□ PEG/Onchip VGA Control
Select VGA control by PEG (PCI-Express Graphic) or onboard chipset.
□ PEG Force X1
Select “PEG Force X1” Enabled/Disabled.
□ On-Chip Frame Buffer Size
Select share system memory 32MB/64MB/128MB.
□ DVMT Mode
DVMT (Dynamic Video Memory Technology) allowing the system to dynamically
allocate memory resources according to the demands of the system at any point in
time, that improve efficiency of the memory allocated to either system or graphics
processor.
□ Total GFX Memory
For Win XP, the MAX Value is base on system memory size, 512MB for 1GB DRAM,
768MB for 1.5GB to 2GB, 1GB fro above 2GB.
□ PAVP Mode
PAVP (Protected Audio Video Path) is a feature to ensure a robust and secure
content protection path for high-definition video playback including Blu-ray discs on
the Microsoft Windows Vista operating system. PAVP ensures that computers
supporting hardware-based decode acceleration are properly utilized in order to
deliver smooth playback. In addition, PAVP reduces processor utilization by
off-loading the video decode onto the chipset to free up the processor to perform
other tasks.
PAVP implementations in Lite mode meet the industry content protection
requirements and allow use of the chipset’s native hardware decode capabilities for
best high definition media experience.
□ Boot Display
Select boot display device type.
□ TV1/2 Standard Type
Select TV standard type.
AEB-GM45 User’s Manual
22
□ BIA Control
Select BIA (Backlight Image Adaptation) control to set power savings by dynamically
brightening the color of a displayed image through modifications to a graphics color
look-up table with a corresponding decrease in backlight intensity.
2.5 Integrated Peripherals
Phoenix – AwardBIOS CMOS Setup Utility
Integrated Peripherals
OnChip IDE Device
Onboard Device
Super IO Device
Watch Dog Timer Select
USB Device Setting
[ Press Enter ]
[ Press Enter ]
[ Press Enter ]
[ Disabled ]
[ Press Enter ]
↑↓→ ← :Move Enter:Select +/-/PU/PD:Value
F5: Previous Values
AEB-GM45 User’s Manual
F10:Save
F6: Fail-Safe Defaults
23
Item Help
Menu Level
ESC:Exit
F1: General Help
F7: Optimized Defaults
□ OnChip IDE Device
Press <Enter> to set IDE and SATA device configuration.
Phoenix – AwardBIOS CMOS Setup Utility
OnChip IDE Device
IDE HDD Block Mode
IDE DMA transfer access
IDE Primary Master PIO
IDE Primary Slave PIO
IDE Primary Master UDMA
IDE Primary Slave UDMA
On-Chip Secondary PCI IDE
IDE Secondary Master PIO
IDE Secondary Slave PIO
IDE Secondary Master UDMA
IDE Secondary Slave UDMA
SATA Mode
LEGACY Mode Support
[ Enabled ]
[ Enabled ]
[ Auto ]
[ Auto ]
[ Auto ]
[ Auto ]
[ Enabled ]
[ Auto ]
[ Auto ]
[ Auto ]
[ Auto ]
[ IDE ]
[ Disabled ]
↑↓→ ← :Move Enter:Select +/-/PU/PD:Value
F5: Previous Values
AEB-GM45 User’s Manual
Item Help
Menu Level
If your IDE hard drive
supports block mode
select Enabled for
automatic detection of
the optimal number of
block read/writes per
sector the drive can
support
F10:Save
F6: Fail-Safe Defaults
24
ESC:Exit
F1: General Help
F7: Optimized Defaults
□ Onboard Device
Press <Enter> to select Onboard LAN Enabled/Disabled.
Phoenix – AwardBIOS CMOS Setup Utility
Onboard Device
Onboard LAN Control
:
[ Enabled ]
Item Help
Menu Level
↑↓→ ← :Move Enter:Select +/-/PU/PD:Value
F5: Previous Values
AEB-GM45 User’s Manual
F10:Save
F6: Fail-Safe Defaults
25
ESC:Exit
F1: General Help
F7: Optimized Defaults
□ Super IO Device
Press <Enter> to select Serial and “PWRON After PWR-Fail” configuration.
Phoenix – AwardBIOS CMOS Setup Utility
Super IO Device
x
x
x
x
Onboard Serial Port 1
Onboard Serial Port 2
UART Mode Select
RxD , TxD Active
IR Transmission Delay
UR2 Duplex Mode
Use IR Pins
PWRON After PWR-Fail
[ 3F8/IRQ4 ]
[ 2F8/IRQ3 ]
[ Normal ]
Hi , Lo
Enabled
Half
IR-Rx2Tx2
[ Off ]
↑↓→ ← :Move Enter:Select +/-/PU/PD:Value
F5: Previous Values
Menu Level
F10:Save
F6: Fail-Safe Defaults
□ Watch Dog Timer Select
Select Watch dog Disabled or set timer value.
AEB-GM45 User’s Manual
Item Help
26
ESC:Exit
F1: General Help
F7: Optimized Defaults
□ USB Device Setting
Press <Enter> to select USB device configuration.
Phoenix – AwardBIOS CMOS Setup Utility
USB Device Setting
USB 1.0 Controller
[ Enabled ]
USB 2.0 Controller
[ Enabled ]
USB Operation Mode
[ High Speed ]
USB Keyboard Function
[ Enabled ]
USB Mouse Function
[ Enabled ]
USB Storage Function
[ Enabled ]
Item Help
Menu Level
*** USB Mass Storage Device Boot Setting ***
↑↓→ ← :Move Enter:Select +/-/PU/PD:Value
F5: Previous Values
AEB-GM45 User’s Manual
F10:Save
F6: Fail-Safe Defaults
27
[Enable] or [Disable]
Universal Host
Controller Interface
for Universal Serial
Bus.
ESC:Exit
F1: General Help
F7: Optimized Defaults
2.6 Power Management Setup
Phoenix – AwardBIOS CMOS Setup Utility
Power Management Setup
x
x
x
x
PCI Express PM Function
ACPI Function
ACPI Suspend Type
Run VGABIOS if S3 Resume
Power Management
Video Off Method
Video Off In Suspend
Suspend Type
Suspend Mode
HDD Power Down
Soft-Off by PWR-BTTN
Wake-Up by PCI card
Power On by Ring
USB KB Wake-UP From S3
Resume by Alarm
Date(of Month) Alarm
Time(hh:mm:ss) Alarm
[ Press Enter ]
[ Enabled ]
[ S1(POS) ]
Auto
[ User Define ]
[ DPMS ]
[ Yes ]
[ Stop Grant ]
[ Disabled ]
[ Disabled ]
[ Instant-Off ]
[ Disabled ]
[ Disabled ]
Disabled
[ Disabled ]
0
0 : 0 : 0
↑↓→ ← :Move Enter:Select +/-/PU/PD:Value
F5: Previous Values
AEB-GM45 User’s Manual
F10:Save
F6: Fail-Safe Defaults
28
Item Help
Menu Level
ESC:Exit
F1: General Help
F7: Optimized Defaults
□ PCI Express PM Function
Press <Enter> to select “Wake-up by LAN” Enabled/Disabled.
Phoenix – AwardBIOS CMOS Setup Utility
PCI Express PM Function
Wake-up by LAN
[ Disabled ]
Item Help
Menu Level
↑↓→ ← :Move Enter:Select +/-/PU/PD:Value
F5: Previous Values
F10:Save
F6: Fail-Safe Defaults
ESC:Exit
F1: General Help
F7: Optimized Defaults
□ ACPI Function
Select ACPI (Advanced Configuration and Power Management) Enabled/Disabled.
□ ACPI Suspend Type
Select S1(POS)/S3(STR).
□ Power Management
Select power saving type.
AEB-GM45 User’s Manual
29
□ Video Off Method
There are three methods,
Blank Screen: Writes blanks to the video buffer.
V/H SYNC + Blank: Turn off the vertical and horizontal sync. ports and write blanks to
the video buffer.
DPMS: The DPMS (Display Power Management Signaling) allows BIOS control the
video display.
□ Video Off In Suspend
Select Video On/Off during suspend state.
□ Suspend Type
There are two types,
Stop Grant: CPU goes into idle mode during suspend state.
PwrOn Suspend: CPU and system remain powered on during suspend state.
□ Suspend Mode
Select system inactivity time, all devices except the CPU will be shut off.
□ HDD Power Down
Select time of system inactivity, the hard disk drive will be powered down while all
other devices remain active.
□ Soft-Off by PWR-BTTN
Select power button function,
Instant-off: Press power button will power off instantly.
Delay 4 Sec: Press power button 4 second to power off.
□ Wake-Up by PCI card
Select Wake-UP by PCI device Enabled/Disabled.
□ Power On by Ring
Select Power on by Ring Indicator signal from Modem.
□ Resume by Alarm
Set date and time to power on system from soft-off state.
AEB-GM45 User’s Manual
30
2.7 PnP/PCI Configurations
Phoenix – AwardBIOS CMOS Setup Utility
PnP / PCI Configurations
x
Init Display First
Reset Configuration Data
[ PCI Slot ]
[ Disabled ]
Resources Controlled By
IRQ Resources
[ Auto(ESCD) ]
Press Enter
PCI/VGA Palette Snoop
INT Pin 1 Assignment
INT Pin 2 Assignment
INT Pin 3 Assignment
INT Pin 4 Assignment
INT Pin 5 Assignment
INT Pin 6 Assignment
INT Pin 7 Assignment
INT Pin 8 Assignment
[ Disabled ]
[ Auto ]
[ Auto ]
[ Auto ]
[ Auto ]
[ Auto ]
[ Auto ]
[ Auto ]
[ Auto ]
Item Help
Menu Level
** PCI Express relative items **
Maximum Payload Size
[ 128 ]
↑↓→ ← :Move Enter:Select +/-/PU/PD:Value
F5: Previous Values
F10:Save
F6: Fail-Safe Defaults
ESC:Exit
F1: General Help
F7: Optimized Defaults
□ Init Display First
Select initial display by PCI or Onboard device.
□ Reset Configuration Data
Select Enabled to reset Extended System Configuration Data (ESCD) when you exit
BIOS setup utility, if you have installed new add-on card and the system
reconfiguration has caused such a serious conflict that the OS cannot boot.
□ Resources Controlled By
BIOS can automatically configure all the boot and Plug and Play compatible devices.
If you choose Auto, you cannot select IRQ DMA and memory base address fields,
since BIOS automatically assigns them.
□ PCI/VGA Palette Snoop
Select PCI/VGA Palette Snoop Enabled/Disabled.
AEB-GM45 User’s Manual
31
□ INT Pin 1/2/3/4/5/6/7/8 Assignment
Select automatically or manual assigned INT to device.
□ Maximum Payload Size
Setup maximum payload size for PCI Express devices.
2.8 PC Health Status
Phoenix – AwardBIOS CMOS Setup Utility
PC Health Status
Shutdown Temperature
CPU Warning Temperature
Current System Temperature
Current CPU Temperature
System FAN Speed
CPU Fan Speed
CPU Vcore
+12 V
+1.5 V
+1.8 V
+5 V
VBAT (V)
3.3VSB (V)
[ Disabled ]
[ Disabled ]
46℃/ 114℉
65℃/ 149℉
0 RPM
3590 RPM
1.15 V
12.19 V
1.54 V
1.82 V
5.07 V
3.26 V
3.31 V
** Smart FAN Setting **
CPU Smart Fan Temp.
Sys. Smart Fan Temp.
[ Disabled ]
[ Disabled ]
↑↓→ ← :Move Enter:Select +/-/PU/PD:Value
F5: Previous Values
F10:Save
F6: Fail-Safe Defaults
Item Help
Menu Level
ESC:Exit
F1: General Help
F7: Optimized Defaults
□ Shutdown Temperature
If CPU temperature reaches the setting value will automatic shutdown system.
□ CPU Warning Temperature
If CPU temperature reaches the setting value will beep in DOS mode.
□ CPU/Sys. Smart Fan Temp.
Setup CPU/System Smart FAN temperature.
AEB-GM45 User’s Manual
32
2.9 Frequency/Voltage Control
Phoenix – AwardBIOS CMOS Setup Utility
Frequency / Voltage Control
Auto Detect PCI Clk
Spread Spectrum
CPU Host/SRC/PCI Clock
[ Enabled ]
[ Disabled ]
[ Default ]
↑↓→ ← :Move Enter:Select +/-/PU/PD:Value
F5: Previous Values
Item Help
Menu Level
F10:Save
F6: Fail-Safe Defaults
ESC:Exit
F7: Optimized Defaults
□ Auto Detect PCI Clk
Select “Auto Detect PCI Clk” Enabled/Disabled
□ Spread Spectrum
Select “Spread Spectrum” Enabled/Disabled.
□ CPU Host/SRC/PCI Clock
Select “CPU Host/SRC/PCI Clock” are default or others setting.
AEB-GM45 User’s Manual
33
F1: General Help
2.10 Load Fail-Safe Defaults
Phoenix – AwardBIOS CMOS Setup Utility
Standard CMOS Features
Frequency / Voltage Control
Advanced BIOS Features
Load Fail-Safe Defaults
Advanced Chipset Features
Load Optimized Defaults
Integrated Peripherals
Set Supervisor Password
Power Management Setup
Set User Password
PnP/PCI Configurations
& Exit
Load Fail-Safe Defaults Save
(Y/N)?
N Setup
Load Fail-Safe Defaults (Y/N)? N
PC Health Status
Exit Without Saving
Esc : Quit
↑↓ ← → : Select Item
F10 : Save & Exit Setup
Load Fail-Safe Defaults
This item will set configuration for non optimized system operation.
AEB-GM45 User’s Manual
34
2.11 Load Optimized Defaults
Phoenix – AwardBIOS CMOS Setup Utility
Standard CMOS Features
Frequency / Voltage Control
Advanced BIOS Features
Load Fail-Safe Defaults
Advanced Chipset Features
Load Optimized Defaults
Integrated Peripherals
Set Supervisor Password
Power Management Setup
Set User Password
PnP/PCI Configurations
& Exit
Load Optimized DefaultsSave
(Y/N)?
N Setup
Load Optimized Defaults (Y/N)? N
PC Health Status
Exit Without Saving
Esc : Quit
↑↓ ← → : Select Item
F10 : Save & Exit Setup
Load Optimized Defaults
This item will restore factory default setting for optimized system operation.
AEB-GM45 User’s Manual
35
2.12 Set Supervisor Password
Phoenix – AwardBIOS CMOS Setup Utility
Standard CMOS Features
Frequency / Voltage Control
Advanced BIOS Features
Load Fail-Safe Defaults
Advanced Chipset Features
Load Optimized Defaults
Integrated Peripherals
Set Supervisor Password
Power Management Setup
Set User Password
PnP/PCI Configurations
Save & Exit Setup
Ente r P a s s word:
PC Health Status
Exit Without Saving
Esc : Quit
↑↓ ← → : Select Item
F10 : Save & Exit Setup
Change/Set/Disabled Password
If set supervisor password, it will request typing password to enter BIOS setup utility.
AEB-GM45 User’s Manual
36
2.13 Set User Password
Phoenix – AwardBIOS CMOS Setup Utility
Standard CMOS Features
Frequency / Voltage Control
Advanced BIOS Features
Load Fail-Safe Defaults
Advanced Chipset Features
Load Optimized Defaults
Integrated Peripherals
Set Supervisor Password
Power Management Setup
Set User Password
PnP/PCI Configurations
Save & Exit Setup
Ente r P a s s word:
PC Health Status
Exit Without Saving
Esc : Quit
↑↓ ← → : Select Item
F10 : Save & Exit Setup
Change/Set/Disabled Password
After set user password it will request to enter password before enter BIOS setup
utility and modify any configuration.
AEB-GM45 User’s Manual
37
2.14 Save & Exit Setup
Phoenix – AwardBIOS CMOS Setup Utility
Standard CMOS Features
Frequency / Voltage Control
Advanced BIOS Features
Load Fail-Safe Defaults
Advanced Chipset Features
Load Optimized Defaults
Integrated Peripherals
Set Supervisor Password
Power Management Setup
Set User Password
PnP/PCI Configurations
Save
& ExitYSetup
SAVE to CMOS and EXIT
(Y/N)?
SAVE to CMOS and EXIT (Y/N)? Y
PC Health Status
Exit Without Saving
Esc : Quit
↑↓ ← → : Select Item
F10 : Save & Exit Setup
Save Data to CMOS
This item confirm save configuration or not before exit BIOS setup utility,
Press <Y> and <Enter> to save configuration, then reboot system.
Press <N> and <Enter> will back to BIOS setup utility.
AEB-GM45 User’s Manual
38
2.15 Exit Without Saving
Phoenix – AwardBIOS CMOS Setup Utility
Standard CMOS Features
Frequency / Voltage Control
Advanced BIOS Features
Load Fail-Safe Defaults
Advanced Chipset Features
Load Optimized Defaults
Integrated Peripherals
Set Supervisor Password
Power Management Setup
Set User Password
PnP/PCI Configurations
Save &NExit Setup
Quit Without S a ving (Y/N)?
Quit Without S a ving (Y/N)? N
PC Health Status
Exit Without Saving
Esc : Quit
↑↓ ← → : Select Item
F10 : Save & Exit Setup
Abandon all Data
This item confirm save configuration or not before quit BIOS setup utility,
Press <Y> and <Enter> will not save configuration, then reboot system.
Press <N> and <Enter> will back to BIOS setup utility.
AEB-GM45 User’s Manual
39
Chapter 3 Drivers Installation
This chapter introduces driver installation information.
Please insert the utility CD to CD-ROM drive, the install menu will appear
automatically, if the install menu did not list suitable driver of Operate System or did
not appear automatically, please select corresponding driver of utility CD to install.
The Windows XP driver installation steps are as below.
3.1 Intel Chipset Device Software
Step 1. Click “Next” to continue
AEB-GM45 User’s Manual
40
Step 2. Read the License Agreement and click “Yes” to continue
Step 3. Click “Next” to continue
AEB-GM45 User’s Manual
41
Step 4. Click “Next” to continue
Step 5. Click “Finish” to complete setup
AEB-GM45 User’s Manual
42
3.2 Intel Graphic Media Accelerator Driver
Step 1. Click “Next” to continue
Step 2. Read the License Agreement and click “Yes” to continue
AEB-GM45 User’s Manual
43
Step 3. Click “Next” to continue
Step 4. Click “Next” to continue
AEB-GM45 User’s Manual
44
Step 5. Click “Finish” to complete setup
AEB-GM45 User’s Manual
45
3.3 LAN Driver
Step 1. Click “Next” to continue
Step 2. Click “Install” to continue
AEB-GM45 User’s Manual
46
Step 3. Click “Finish” to complete setup
AEB-GM45 User’s Manual
47
3.4 Audio Driver
Step 1. Click “Next” to continue
Step 2. Click “Finish” to complete setup
AEB-GM45 User’s Manual
48
3.5 Intel High Definition Audio HDMI Driver
Step 1. Click “Next” to continue
Step 2. Read the License Agreement and click “Yes” to continue
AEB-GM45 User’s Manual
49
Step 3. Click “Next” to continue
Step 4. Click “Next” to continue
AEB-GM45 User’s Manual
50
Step 5. Click “Finish” to complete setup
AEB-GM45 User’s Manual
51
Appendix-A Watchdog
The system board provides Watchdog function, the Super I/O setting step as below.
Step 1: CR2D, Bit0→0 (select pin77 to WDTO#)
Step 2: LD8, CR30, Bit0→1 (Active WDTO#)
Step 3: LD8, CRF7, Bit4→Write 0 to clear WDTO# status.
Step 4: LD8, CRF5, Bit3→0: Second mode, 1: Minute mode
Step 5: LD8, CRF6, Bit [7:0] →Set WDTO# Time out value. (WDTO# startup after
setting the system time, or setup from step 3 ~ step 5 to restart WDT.)
Appendix-B GPIO
The system board provides input and output ports that can be individually configured
to perform a simple basic I/O function. Users can configure each individual port to
become an input or output port by programming register bit of I/O selection. To invert
port value, the setting of Inversion Register has to be made. Port values can be set to
read or write through Data Register.
Please refer previous chapter for pin define description.
Access Cash Drawer GPIO Programming Guide
There are two PNP I/O port addresses that can be used to configure GPIO ports,
(1). 0x2E - EFER (Extended Function Enable Register, for entering Extended
Function Mode)
- EFIR (Extended Function Index Register, for identifying CR index
number)
(2). 0x2F - EFDR (Extended Function Data Register, for accessing desired CR)
Below are some example codes for demonstrate GPIO function.
AEB-GM45 User’s Manual
52
// Enter Extended Function Mode
outp(0x002E, 0x87);
outp(0x002E, 0x87);
// Assign Pin121-128 to be GPIO port 1
outp(0x002E, 0x29);
outp(0x002F, inp(0x002F) | 0x01);
// Select Logic Device 7
outp(0x002E, 0x07);
outp(0x002F, 0x07);
// Active Logic Device 7
outp(0x002E, 0x30);
outp(0x002F, 0x01);
// Select Inversion Mode
outp(0x002E, 0xF2);
outp(0x002F, 0x83);
// Select I/O Mode
// Bit0~bit3 output and bit4~bit7 input
outp(0x002E, 0xF1);
outp(0x002F, 0x00);
// Access GPIO ports
outp(0x002E, 0xF0);
outp(0x002F, 0x7C);
// Exit Extended Function Mode
outp(0x002E, 0xAA);
Definitions of Variables:
Each bit in the lower nibble of each Register represents the setting of a GPIO port.
Bit0 vs. GPIO DIO-Out 0
Bit1 vs. GPIO DIO-Out 1
Bit7 vs. GPIO DIO-Out 3
Bit4 vs. GPIO DIO-In 0
Bit3 vs. GPIO DIO-In 3
AEB-GM45 User’s Manual
53
Value of Inversion Register:
Only lower nibble is available for this function.
When set to a ‘1’, the incoming/outgoing port value is inverted.
When set to a ‘0’, the incoming/outgoing port value is the same as in Data Register.
Value of I/O Selection Register:
Only lower nibble is available for this function.
When set to a ‘1’, respective GPIO port is programmed as an input port.
When set to a ‘0’, respective GPIO port is programmed as an output port.
Value of Output Data / Input Data:
Only lower nibble is available for this function.
If a port is assigned to be an output port, then its respective bit can be read/write.
If a port is assigned to be an input port, then its respective bit can be read only.
Note:
Some other functions may occupy the high nibble of the registers. Altering any
content in high nibble will be undesired.
AEB-GM45 User’s Manual
54