3-240-202-21 (1)
Portable
CD Player
Operating Instructions
About the area code
The area code of the location in which you purchased the CD player
is shown on upper left of the bar code label on the package.
For accessories supplied with your CD player, check the area code
of your model and see “Accessories (supplied/optional).”
“WALKMAN” is a trademark of
Sony Corporation.
D-SJ301
© 2002 Sony Corporation
WARNING
To prevent fire or shock
hazard, do not expose the unit
to rain or moisture.
Do not install the appliance in a confined
space, such as a bookcase or built-in
cabinet.
To prevent fire, do not cover the ventilation
of the apparatus with newspapers, tablecloths, curtains, etc. And don’t place lighted
candles on the apparatus.
To prevent fire or shock hazard, do not place
objects filled with liquids, such as vases, on
the apparatus.
CAUTION
The use of optical instruments with this
product will increase eye hazard.
Certain countries may regulate disposal of
the battery used to power this product. Please
consult with your local authority.
CAUTION
• INVISIBLE LASER RADIATION
WHEN OPEN
• DO NOT STARE INTO BEAM OR
VIEW DIRECTLY WITH OPTICAL
INSTRUMENTS
The CE mark is valid only for
products marketed in the European
Union.
For the customers in Australia
The supply cord of the AC power adaptor
cannot be replaced; if the cord is damaged,
the AC power adaptor should be discarded.
2
Table of Contents
Getting started
Locating the controls ................................... 4
Playing a CD
1. Connect your CD player. ......................... 6
2. Insert a CD. ............................................. 6
3. Play a CD. ............................................... 7
Playback options
Playing tracks repeatedly (Repeat play) .... 10
Playing a single track (Single play) ........... 10
Playing tracks in random order
(Shuffle play) ......................................... 10
Playing tracks in your favorite order
(PGM play) ............................................ 11
Connecting to a power source
Using the rechargeable batteries ................ 16
Using dry batteries ..................................... 18
Notes on the power source ........................ 18
Additional information
Precautions ................................................ 19
Maintenance .............................................. 20
Troubleshooting ......................................... 21
Specifications ............................................ 23
Accessories (supplied/optional) .. Back cover
Available features
G-PROTECTION function ........................ 12
Emphasizing the bass sound (SOUND) .... 12
Protecting your hearing (AVLS) ................ 13
Locking the controls (HOLD) ................... 13
Turning off the operation beep sound ........ 14
Connecting your CD player
Connecting a stereo system ....................... 15
3
Getting started
Locating the controls
For details, see pages in parentheses.
CD player (front)
1 HOLD switch
(page 13)
6 PLAY MODE button
(pages 9 - 11)
2 3-way control key
(see below)
7 REPEAT/ENTER button
(pages 9 - 11)
3 VOL (volume)
control
(page 7)
8 SOUND button
(pages, 12, 13)
9 i (headphones)
jack
(pages 6, 15)
4 DC IN 4.5 V
(external power
input) jack
(pages 6, 16)
5 Display
(pages 8, 10 - 13)
q; Buckle
2 3-way control key
N/>: Play/AMS/search
(pages 6, 7, 11)
.: AMS/search (pages 7, 11)
x/CHG: stop/charge
(pages 7, 14, 16)
Push toward
N/> or
..
4
Press x/CHG.
CD player (inside)
Getting started
qa G-PROTECTION
switch
(page 12)
qs Battery compartment
(page 16)
Using the hand strap
While jogging, use the supplied hand strap.
1 Pass the strap through the hooks.
2 Put your hand between the player and the strap, then adjust the length of the strap and fix it
using the Velcro tapes.
5
Playing a CD
You can also use rechargeable batteries and dry batteries as a power source.
1. Connect your CD player.
1 Connect the AC power adaptor.
2 Connect the headphones/earphones.
to an AC outlet
AC power
adaptor
3-way control key
(N/>)
to i (headphones)
Headphones
or
Earphones
to DC IN
4.5V
2. Insert a CD.
1 Unfasten the buckle.
2 Open the lid.
3 Fit the CD on the pivot and close the lid.
4 While holding the lid closed, fasten the buckle
securely.
Label side up
6
3. Play a CD.
To
Play (from the point you stopped)
Play (from the first track)
Stop
Find the beginning of the current track (AMS*1)
Find the beginning of the previous tracks (AMS)
Find the beginning of the next track (AMS)
Find the beginning of the succeeding tracks (AMS)
Go backwards quickly
Go forward quickly
Playing a CD
Push the 3-way control
key toward N/>.
Adjust the volume.
Do this
Push the 3- way control key toward
N/>.
Playback starts from the point you
stopped.
Push the control key toward N/> and
hold it for 2 seconds or more.
Press x/CHG*2
Push the control key toward .once
quickly*2
Push the control key toward .
repeatedly*2, *3
Push the control key toward N/> once
quickly*2, *3
Push the control key toward N/>
repeatedly*2, *3
Push the control key toward . and hold it*2
Push the control key toward N/> and
hold it*2
*1 Automatic Music Sensor
*2 These operations can be done during play.
*3 After you have played the last track, you can return to the beginning of the first track by pushing the 3- way
control key toward N/> . Similarly, if you are at the first track, you can locate the last track by pushing
the control key toward ..
(Continued)
7
About the display
• When you push the 3- way control key toward N/> after changing the CD or turning off
and on the player, the total number of tracks in the CD and total playing time appear for about
two seconds.
• During play, the track number and the elapsed playing time of the current track appear.
If the volume level does not increase
If “AVLS” appears in the display, hold down SOUND until “AVLS ” disappears from the display.
For details, see “Protecting your hearing (AVLS).”
About CD-Rs/CD-RWs
This CD player can play CD-Rs/CD-RWs recorded in the CD-DA format*, but playback
capability may vary depending on the quality of the disc and the condition of the recording
device.
* CD-DA is the abbreviation for Compact Disc Digital Audio. It is a recording standard used for the Audio
CDs.
Removing the CD
Remove the CD while pressing the pivot in the center of the tray.
8
Playback options
You can enjoy various ways of playback using PLAY MODE and REPEAT/ENTER.
PLAY MODE button
Each time you press the button, you can
change the playback mode.
No indication
(Normal play)
REPEAT/ENTER button
“SHUF”
(Play tracks in random order)
“PGM”
(Play tracks in your favorite order)
REPEAT
You can repeat play that is selected using
PLAY MODE.
ENTER
You can select tracks for PGM play
mode.
3- way control key
(N/>, .)
(Continued)
9
Playback options
“1”
(Play a single track)
Playing tracks repeatedly
(Repeat play)
You can play tracks repeatedly in normal, single, shuffle and PGM play modes.
During playback, press REPEAT/ENTER.
Playing a single track
(Single play)
During playback, press PLAY MODE
repeatedly until “1” appears.
Playing tracks in random order
During playback, press PLAY MODE
repeatedly until “SHUF” appears.
10
(Shuffle play)
Playing tracks in your favorite order
(PGM play)
You can program the CD player to play up to 64 tracks in your favorite order.
1
During playback, press PLAY MODE
repeatedly until “PGM” appears.
2
Push the 3-way control key toward
. or N/> to select a track.
Track number
Playback options
Playing order
3
Press REPEAT/ENTER to enter
the selected track.
“00” appears and the playing order increases
by one.
4
5
Repeat steps 2 and 3 to select the tracks in your favorite order.
Hold down REPEAT/ENTER to start PGM play.
To check the program
During programming:
Press REPEAT/ENTER repeatedly before step 5.
During the PGM play:
Press PLAY MODE repeatedly until “PGM” flashes, then press REPEAT/ENTER.
Each time you press REPEAT/ENTER, the track number appears.
Notes
• When you finish entering the 64th track in step 3, the first selected track appears in the display.
• If you select more than 64 tracks, the first selected tracks are erased.
11
B Available features
G-PROTECTION
function
Emphasizing the bass
sound (SOUND)
The G-PROTECTION function has been
developed to provide excellent protection
against sound skipping while jogging.
When you set the G-PROTECTION switch
on your CD player to “2”, the GPROTECTION function will be enhanced
compared to “1.”
To walk with the CD player and enjoy high
quality CD sound using the G-PROTECTION
function, set the G-PROTECTION switch to
“1.” While taking harder exercise, it is
recommended that you set it to “2.” .
You can emphasize the bass-boosted sound.
Press SOUND to select “BASS
“BASS
.”
” or
No indication
(Normal play)
BASS
BASS
Set G-PROTECTION (under the lid) to
“1” or “2.”
The selected sound mode is displayed.
During active uses, use the supplied hand
strap (see “Using the supplied hand strap” in
Locating the controls).
“BASS
” enhances the bass sound
more than “BASS
.”
Note
Note
Sound may skip:
– if the CD player receives stronger continuous
shock than expected,
– if a dirty or scratched CD is played or
– when using poor-quality CD-Rs/CD-RWs or
if there is a problem with the original recording
device or application software.
12
If the sound is distorted when using the SOUND
function, turn down the volume.
Protecting your hearing
Locking the controls
(AVLS)
(HOLD)
The AVLS (Automatic Volume Limiter
System) function keeps down the maximum
volume to protect your hearing.
You can lock the controls on your CD player
to prevent accidental button presses.
Hold down SOUND until “AVLS”
appears in the display.
Slide HOLD in the direction of the
arrow.
To turn off the AVLS function
Hold down SOUND until “AVLS” disappears
from the display.
Available features
Displayed when AVLS function is
activated.
Displayed when the HOLD
function is activated.
Note
If you use the SOUND function and the AVLS
function at the same time, sound may be distorted.
If this happens, turn down the volume.
To unlock the controls
Slide HOLD in the opposite direction of the
arrow.
13
Turning off the
operation beep sound
You can turn off the beep sound that is heard
from your headphones/earphones when you
operate your CD player.
1
Remove the power source (AC
power adaptor, rechargeable
batteries or dry batteries) from the
CD player.
2
Connect the power source while
pressing x/CHG.
To turn on the beep sound
Remove the power source and then connect
the power source without pressing x/CHG.
14
B Connecting your CD player
Connecting a stereo
system
You can listen to CDs through a stereo
system and record CDs on a cassette tape.
For details, see the instruction manual that
comes with the connected device.
Be sure to turn off all connected devices
before making connections.
Notes
• Before you play a CD, turn down the volume of
the connected device to avoid damaging the
connected speakers.
• Use the AC power adaptor for recording. If you
use the rechargeable batteries or dry batteries as a
power source, batteries may become completely
depleted during recording.
• Adjust the volume properly on the CD player and
connected device so that the sound will not be
distorted or noisy.
About the G-PROTECTION function
when using the connecting cord
To record high quality CD sound, set the
G-PROTECTION switch to “1.”
to i
Adjust the volume.
Connecting your CD player
Connecting cord
Right (red)
Left (white)
Stereo system,
cassette recorder,
radio cassette
recorder, etc.
15
B Connecting to a power source
You can use the following power sources:
• Rechargeable batteries
• AC power adaptor (see “Playing a CD”)
• LR6 (size AA) alkaline batteries
3
Connect the AC power adaptor to
the DC IN 4.5 V jack of your CD
player and an AC outlet, then
press x/CHG to start charging.
For the battery life and charging time of the
rechargeable batteries, see “Specifications.”
Using the rechargeable
batteries
Charge the rechargeable batteries before
using them for the first time. You can use
only the following rechargeable batteries for
your CD player.
• NH-WM2AA (NH-WMAA × 2)
1
to DC IN 4.5 V
3-way control
key (x/CHG)
Open the battery compartment lid
inside your CD player.
AC power adaptor
to an AC outlet
2
Insert two rechargeable batteries
by matching the 3 to the diagram
in the battery compartment and
close the lid until it clicks into
place.
Insert the # end first
(for both batteries).
16
The CD player charges the batteries. The
“CHG” indicator turns on in the display,
and the indicator sections of
light
up in succession. When the batteries are
completely charged, the “CHG” and
indicators turn off.
If you press x/CHG after the charge has
already been completed, the
indicator flashes and “Full” appears in
the display.
4
Disconnect the AC power adaptor.
To remove the rechargeable batteries
Remove the batteries as illustrated below.
When to replace the rechargeable
batteries
If the battery life becomes shorter by about
half, replace the batteries with new
rechargeable batteries.
Note on the rechargeable batteries
If the battery is new or has not been used for
a long time, it may not be charged
completely until you charge and discharge it
several times.
When to charge the rechargeable
batteries
You can check the remaining power of the
batteries in the display.
Battery power is full.
○
○
○
r
Note on carrying the rechargeable
batteries
Use the supplied battery carrying case to
prevent unexpected heat. If the rechargeable
batteries and the metallic objects are
contacted, heat or fire may occur due to a
short circuit.
○
r
○
Battery power is getting low.
○
○
r
To attach the battery compartment lid
If the battery compartment lid is detached by
an accidental drop, excessive force, etc.,
attach it as illustrated below.
○
○
r
Lo batt*
Connecting to a power source
Battery power is low.
r
Batteries are depleted.
* Beep sounds.
To keep the original battery capacity for a
long time, charge the batteries only when
they are completely depleted.
Notes
• The indicator sections of
roughly show the
remaining battery power. One section does not
always indicate one-fourth of the battery power.
• Depending on operating conditions, the indicator
sections of
may increase or decrease.
17
Using dry batteries
Use only the following dry battery type for
your CD player:
• LR6 (size AA) alkaline batteries
Note
Be sure to remove the AC power adaptor when
using the dry batteries.
1
Open the battery compartment lid.
2
Insert two LR6 (size AA) batteries
by matching the 3 to the diagram
in the battery compartment.
Insert the # end first (for both batteries).
To remove the batteries
Remove the batteries in the same way as
rechargeable batteries.
When to replace the batteries
You can check the remaining power of the
batteries in the display.
Battery power is full.
○
○
○
r
○
r
Battery power is getting low.
○
○
○
r
○
○
r
Battery power is low.
r
Lo batt*
Batteries are depleted.
* Beep sounds.
When the batteries are depleted, replace both
batteries with new ones.
18
Notes on the power
source
Disconnect all power sources when the CD
player is not used.
On AC power adaptor
• Use only the AC power adaptor supplied or
recommended in “Accessories (supplied/
optional).” Do not use any other AC power
adaptor. It may cause a malfunction.
Polarity of the plug
• When disconnecting the AC power adaptor
from the AC outlet, grasp the adaptor
itself. Do not pull it by the cord.
• Do not touch the AC power adaptor with
wet hands.
On rechargeable batteries
and dry batteries
• Do not charge the dry batteries.
• Do not throw the batteries into fire.
• Do not carry the batteries with coins or
other metallic objects. It can generate heat
if the positive and negative terminals of the
battery are accidentally contacted by a
metallic object.
• Do not mix rechargeable batteries with dry
batteries.
• Do not mix new batteries with old ones.
• Do not use different types of batteries
together.
• When the batteries are not to be used for a
long time, remove them.
• If battery leakage occurs, wipe off any
deposit in the battery compartment, and
install new batteries. In case the deposit
adheres to you, wash it off thoroughly.
B Additional information
Precautions
On safety
• Should any solid objects or liquid fall into
the CD player, unplug it and have it
checked by qualified personnel before
operating it any further.
• Do not put any foreign objects in the DC
IN 4.5 V (external power input) jack.
On the CD player
On handling CDs
• To keep the CD clean, handle it by its
edge. Do not touch the surface.
• Do not stick paper or tape onto the CD.
Not these ways
On headphones/earphones
Road safety
Do not use headphones/earphones while
driving, cycling, or operating any motorized
vehicle. It may create a traffic hazard and is
illegal in some areas. It can also be
potentially dangerous to play your headsets
at high volume while walking, especially at
pedestrian crossings. You should exercise
extreme caution or discontinue use in
potentially hazardous situations.
Preventing hearing damage
Avoid using headphones/earphones at high
volume. Hearing experts advise against
continuous, loud and extended play. If you
experience a ringing in your ears, reduce
volume or discontinue use.
Consideration for others
Keep the volume at a moderate level. This
will allow you to hear outside sounds and to
be considerate to the people around you.
On the water resistance
• Before unfastening the buckle to open the
lid, be sure to wipe off water, dust or sand
on the exterior of the unit. Open and close
the lid where water or sand cannot fall in
the unit, and make sure that your hands are
dry. If water or sand falls in the unit,
trouble may occur.
• When closing the lid, check that there is no
dust or sand on the rubber packing around
the lid. Then close the lid firmly with the
buckle.
(Continued)
19
Additional information
• Keep the lens on the CD player clean and
do not touch it. If you do so, the lens may
be damaged and the CD player will not
operate properly.
• Do not put any heavy object on top of the
CD player. The CD player and the CD may
be damaged.
• Do not leave the CD player in a location
near heat sources, or in a place subject to
direct sunlight, excessive dust or sand,
moisture, rain, mechanical shock,
unleveled surface, or in a car with its
windows closed.
• If the CD player causes interference to the
radio or television reception, turn off the
CD player or move it away from the radio
or television.
• Discs with non-standard shapes (e.g.,
heart, square, star) cannot be played on this
CD player. Attempting to do so may
damage the CD player. Do not use such
discs.
• Do not expose the CD to direct sunlight or
heat sources such as hot air ducts. Do not
leave the CD in a car parked under direct
sunlight.
• Do not use the CD soiled with dust.
Malfunction may occur.
Precautions
Maintenance
• The supplied headphones are not meant to
be immersed in water or come in
continuous contact with water. If they are
accidentally dropped into water or get wet,
dry them with a soft cloth. Never use an
electric hair dryer.
• The supplied AC power adaptor is not
water resistant. To prevent shock hazard,
avoid using the player near water during
AC operation.
• Cover the DC IN 4.5 V jack and i jack
with the attached rubber caps when
nothing is connected to these jacks. If the
inside of the jacks are contaminated with
water or sand, rust may develop and cause
trouble.
To clean the casing
Notes
• Since the unit is airtight, you may not be able to
open the lid when there is a sudden change in air
pressure inside the unit. This happens when the
unit is transported on a plane or moved from a
warm place to a cold place. In this case, open the
rubber cap on the DC IN 4.5 V jack.
• To prevent water from leaking in, the buckle is
designed to be slightly stiff. Be careful not to
catch a fingernail on the buckle when unfastening
the lid.
Do not hold the player with the buckle
by itself. Doing so may damage the
unit.
20
Use a soft cloth slightly moistened in water
or a mild detergent solution. Do not use
alcohol, benzine or thinner.
To clean the headphones/
earphones plug
Keep the plug of your headphones/earphones
clean to obtain optimum sound. Wipe it with
a dry, soft cloth.
To remove any dust or sand
from the rubber packing
Any sand or dust on the rubber packing will
prevent the lid from shutting tightly, and
water may leak in. Brush off the dust once in
a while.
We recommend the replacement of the
rubber packing every year which is available
optionally at an authorized Sony service
facility.
Troubleshooting
Should any problem persist after you have checked these symptoms, consult your nearest Sony
dealer.
Symptom
Cause and/or corrective actions
The volume does not increase
even if the VOL control is
adjusted to the maximum
level.
No sound, or noise is heard.
c If “AVLS” appears in the display, hold down SOUND until
“AVLS” disappears from the display. (page 13)
The playing time is too short
when powered with the dry
batteries.
The playing time is too short
when powered with the
rechargeable batteries.
“Lo batt” or “00” appears in
the display. The CD does not
play.
“HI dc In” appears in the
display.
The CD does not play or
“no dISC” appears in the
display when a CD is placed
in the CD player.
c The rechargeable batteries are used up completely. Charge the
batteries. (pages 16, 17)
c Replace the batteries with new LR6 (size AA) alkaline batteries.
(page 18)
c Use only the AC power adaptor or car battery cord in “Accessories
(supplied/optional).” (back cover)
c Remove all power sources, then insert the batteries or connect the
AC power adaptor again. (pages 6, 16, 17, 18)
c The buttons are locked. Slide the HOLD switch back. (page 13)
c The CD is dirty or defective. (page 19)
c Check that the CD is inserted with the label side up. (page 6)
c Moisture condensation has occurred.
Leave the CD player aside for several hours until the moisture
evaporates.
c Close the lid of the battery compartment firmly. (page 16)
c Make sure the batteries are inserted correctly. (pages 16 - 18)
c Connect the AC power adaptor to an AC outlet securely. (page 6)
c The CD-R/CD-RW was not finalized. Finalize the CD-R/CD-RW
with the recording device.
c There is a problem with the quality of the CD-R/CD-RW,
recording device, or application software.
c The buttons are locked. Slide the HOLD switch back. (page 13)
c During stop, press x/CHG. (page 16)
(Continued)
21
Additional information
“Hold” appears in the
display when you press a
button, and the CD does not
play.
The CD player does not start
charging.
c Connect the plugs firmly. (page 6)
c Plugs are dirty. Clean the plugs with a dry soft cloth periodically.
c Check that you are using alkaline batteries and not manganese
batteries. (page 18)
c Replace the batteries with new LR6 (size AA) alkaline batteries.
(page 18)
c Charge and discharge the rechargeable batteries several times.
(pages 16, 17)
Troubleshooting
Symptom
Cause and/or corrective actions
Playback starts from the
point you stopped. (resume
function)
c The resume function is working. To start play from the first track,
push the 3-way control key toward N/> and hold it for 2
seconds or more, or open the lid of the CD player. Or remove all
power sources, then insert the batteries or connect the AC power
adaptor again. (pages 6, 7, 16, 18)
c Close the lid of the battery compartment firmly. (page 16)
Rustling noise of the CD is
heard.
When using with a connected
stereo system, the sound is
distorted or noisy.
22
c Adjust the volume of the CD player and the connected device.
(page 15)
Specifications
System
Compact disc digital audio system
Battery life* (approx. hours)
(When you use the CD player on a flat and stable
surface.)
Playing time varies depending on how the CD
player is used.
Laser diode properties
When using
Material: GaAlAs
Wavelength: λ = 780 nm
Emission duration: Continuous
Laser output: Less than 44.6 µW
(This output is the value measured at a distance
of 200 mm from the objective lens surface on
the optical pick-up block with 7 mm aperture.)
NH-WM2AA
(charged for
about 5 hours**)
Two Sony alkaline
batteries LR6(SG)
(produced in Japan)
G-PROTECTION function
1
2
30
32
47
50
D-A conversion
1-bit quartz time-axis control
40 - 20 000 Hz –4.5 dB (measured by JEITA CP307)
* Measured value by the standard of JEITA (Japan
Electronics and Information Technology
Industries Association).
** Charging time varies depending on how the
rechargeable battery is used.
Output (at 4.5 V input level)
Operating temperature
Headphones (stereo minijack)
Approx. 5 mW + Approx. 5 mW at 16 Ω
(Approx. 0.5 mW + Approx. 0.5 mW
at 16 Ω)*
*For the customers in Europe
5°C - 35°C (41°F - 95°F)
Frequency response
0
Power requirements
For the area code of the model you
purchased, check the upper left side of the
bar code on the package.
Approx. 133.9 × 38.1 × 147.5 mm
(5 3⁄8 × 1 1⁄2 × 5 7⁄8 in.)
Mass (excluding accessories)
Approx. 305 g (10.8 oz.)
Design and specifications are subject to change
without notice.
Additional information
• Sony NH-WM2AA rechargeable batteries:
2.4 V DC
• Two LR6 (size AA) batteries: 3 V DC
• AC power adaptor (DC IN 4.5 V jack):
U/U2/CA2/E92/MX2/TW2/BR3 model:
120 V, 60 Hz
CED/CET/CEW/CEX/CE7/EE/EE1/E13/G5/
G6/G7/G8/BR1 model: 220 - 230 V, 50/60 Hz
CEK/3CE7 model: 230 - 240 V, 50 Hz
AU2 model: 240 V, 50 Hz
JE.W/E33/EA3/KR4 model: 100 - 240 V,
50/60 Hz
HK2 model: 220 V, 50/60 Hz
AR1/CNA model: 220 V, 50 Hz
Dimensions (w/h/d) (including
projecting parts and controls)
23
Accessories
Optional accessories
(supplied/optional)
Supplied accessories
For the area code of the location in which you
purchased the CD player, check the upper left side
of the bar code on the package.
AC power adaptor (1)
Headphones/earphones (1)
Hand strap (1)
AC power adaptor
Active speaker system
AC-E45HG
SRS-Z500
SRS-T1
Car battery cord
DCC-E345
Car battery cord with car connecting pack
DCC-E34CP
Car connecting pack
CPA-9C
Connecting cord
RK-G129
RK-G136
Rechargeable battery
NH-WM2AA
Earphones (except for the customers in France)
MDR-E848LP
MDR-EX70LP
MDR-A44L
MDR-A110LP
Earphones (for the customers in France)
MDR-E808LP
When using optional headphones, use only
headphones with stereo miniplugs. You
cannot use headphones with micro plugs.
Stereo miniplug
Micro plug
Your dealer may not handle some of the
above listed accessories. Please ask the
dealer for detailed information about the
accessories in your country.
Sony Corporation Printed in Malaysia
24