Multi-User Listening System

Multi-User Listening System
Quick Start
Instructions
Start the Receiver(s) by pressing
the ON button located on the top
of the right side, until the display
appears. Repeat for the
Transmitter.
The battery symbols at the upper
right corner of the displays show
the amount of charge left. Follow
the instructions in the User
Manual for charging procedures.
A. Use both the left and right
+/- volume controls on the
Receiver to adjust the volume
to zero (0) before connecting
the Headphone or the
Neckloop to the Receiver.
B. Use the +/- volume controls
on the Receiver to adjust
the volume to a comfortable
listening level for both the
Receiver microphone (right
control) and the Transmitter
microphone, left side.
If the sound is clear, the
system is ready.
If the sound is distorted or you
have no sound, please follow
Pairing instructions.
Power switch
On/Off
Additional Instructions
More details in the User Manual
Pairing the Transmitter
with the Receiver
Adjusting Microphone
Settings
If the sound is static or distorted, the two units
need to be paired again.
Use the up/down arrow keys on each
unit to select microphone mode.
A. Confirm both units are charged and ON.
A. To select Directional microphone,
press the up arrow.
B. Press Menu/OK key (center) on both
Receiver and Transmitter.
C. Scroll to PAIR and press Menu/OK key
on both units.
D. A new menu will show. Press “Pair” on both
units. The Receiver will display “Waiting for
transmitter”.
E. Follow instructions on Transmitter display.
Use Menu/OK key to press “OK to Continue”.
To pair multiple Receivers to a Transmitter,
perform the A through F sequence with all
units at the same time. Read more in the
User Manual, page 24.
Changing Channels
Transmitter and Receiver should be set to same
channel. To switch channel, follow these steps:
A. Confirm both units are ON.
B. On the Transmitter, press the Menu/OK key,
scroll to “Channel” and press the Menu/OK
key.
Use the Sound Kit / Audio Cable to
set up the Comfort Contego to work
with a TV or other sound systems.
Please turn to the User Manual,
page 24 for instructions
B. To select Omni-directional
microphone, press down arrow.
Contego Transmitter
Contego Receiver
Connector for
neckloop/
headphones
Microphones
Microphones
Power switch
On/Off
Display
F. The display on both units should read
“Pairing complete”.
If F. fails, please repeat steps A – F.
Connecting with other
Sound Systems.
Clip on
the back
Arrow up for
directional
microphone
Volume
control,
transmitter
Menu/OK
Charging
Volume
control,
receiver
Arrow down for
omni-directional
microphone
Arrow up for
directional
microphone
Menu/OK
Arrow down for
omni-directional
microphone
For additional operating instructions please consult the
User Manual, or contact Comfort Audio.
C. Use the Transmitter’s up and down arrow
keys, scroll to another channel. Press
Menu/OK key to select the new Channel.
D. The Receiver will automatically switch to
selected channel.
Charging
www.comfortaudio.us
1-847-656 5450