BluePrint now

THE
EMBEDDED
SOFTWARE
TOOLS
COMPANY
Debug — Trace — Coverage — Performance — Visualization — Test — Report
BluePrint
News and Innovations
WIRELESS
Wireless Debugger
1
testIDEA Pro 1 User
2
Floating License
testIDEA: What‘s hot?
2
winIDEA OPEN
3
Semiconductor News
3
iC6000 Special
4
AUTOSAR OS from Erika
5
Enterprise
Connectivity Special
6
LieberLieber—UML De-
6
bugging
DEBUGGER—WHAT‘S
Technical Notes Wireless
Debugger for Cortex-M, supported Cortex derivatives, etc.
Hardware Reference Manual
Wireless Debugger
AdaCore—Code Coverage
7
Razorcat—Unit Test
7
Renesas—Starter Kit
7
Vector Informatik—XCP
7
Infineon– DAVE
7
The Last Page
8
The official launch of the
product was end of February
2014 at Embedded World in
Nuremberg, Germany. Anja
Visnikar (a member of the
iSYSTEM software development team) presented
iSYSTEM’s wireless debug
solution @Embedded World
Conference . This presentation is also documented in a
technical article available
from iSYSTEM’s web page.
Multicore
TODAY?
Since a couple of month
iSYSTEM launched the wireless debugger era. For now
the wireless part is handled
by a Bluetooth connection. In
the near future, iSYSTEM will
release a WiFi version of this
platform too. For now all the
necessary information can
be found on iSYSTEM’s web
page:
6
Timing Architects—
AVAILABLE
How to license a wireless
debugger? Two options:


License is stored in the
Bluetooth Dongle
License is stored in the
Debugger Hardware
iSYSTEM’s Bluetooth Debugger (order # IW-IONE-BT-
Did you know that you may order an optional
12V power supply for Car (cigarette lighter)
plug using ordering code „IC30000-PSCAR12V“ ? It works for any blue box.
CORTEXM) comes as a bundle of different components
(bundle price is EUR 2.900):

Bluetooth Dongle (IWBRIDGE-BT1)

Debugger Hardware
(IW-IONE-BT101)

winIDEA/testIDEA Standard license

Update/Support Standard
Service (1 year)
Additional Debugger Hardware can be purchased for
EUR 500 each. A Bluetooth
Dongle can be paired with
every wireless debugger
hardware.
Page2
BLUEPRINT
TESTIDEA
PRO
Since April 2014 iSYSTEM
does provide a testIDEA Pro
Dongle version. It is similar
to a 1-user floating license
done in software and costs
EUR 4.950 including the
dongle.
If a different floating license is required, a certain
MORE
USER
testIDEA is an application
for embedded software
testing of machine/object
code. It complements iSYSTEM’s debug and analyzer
tools for embedded software development with
testing and test automation
functionality. In combination with an instruction set
simulator, testing can also
be performed on a PC without connecting to the target.
The powerful and generic
scripting interface allows
automating tests very easily. Standard script language within iSYSTEM tools
is Python.
Eclipse plug-in:
testIDEA is implemented in
JAVA. So running it under
Eclipse is a logical thing.
iSYSTEM now provides an
Eclipse version of testIDEA.
Multicore support:
With multi-core target
MCUs, a need to run tests
on a specific core appears.
To be able to utilize multicore testing, one must first
properly configure testIDEA.
FLOATING
discount applies (please
contact iSYSTEM’s sales
team):

Usable on every PC running winIDEA

Flexible combination
with any blue box

testIDEA use with simu-
TESTIDEA—WHAT‘S
Machine / Object code
level testing
More
Information:
isystem.com/
downloads/
testIDEA/help/
1
LICENSE
lators possible (without
blue box and target)*
* iSYSTEM tools currently
come with an ARM and
MPC instruction set simulator. It is planned to integrate 3rd party simulators in
the near future.
HOT?
1. Configure Core IDs
Each core is identified by
its index. To make this
identification more user
friendly, one can assign a
name to each core in project properties (File | Properties | Multicore configuration). The comma separated list contains a list of
core IDs, where the first
item refers to the core with
index 0 or primary core, the
next item refers to core
with index 1, and so forth.
2. Initialization Sequenze
With more than one core
the initialization sequence
becomes more complex.
The init sequence for all
winIDEA instances per
cored has to be entered
into a Run configuration
dialog (Run | Run configuration) within testIDEA.
The main difference to unit
tests are target start and
stop conditions. While unit
tests define the test start
as a function entry, and
test end as a function exit,
system tests have no such
clear definitions of test
start and stop, so a user
has to define them explicitly. To start the test at a
specific point, one defines
the section Init test, and to
end the test one defines
the section Stop test.
Test points
Test points enable a user
to pause test execution at
any location in the tested
code, and perform the following actions:
 Verify the values of vari-
ables to test the internal
state during function
execution
 Assign values to variab-
3. Assign Core ID to a test
case
The final step is defining a
core ID for each test case.
System test support
In contrast to unit tests,
which test the behavior of a
function, system tests verify the behavior of a complete system or parts of the
system which are greater
than a single function. The
test scope can be specified
in the Meta section of the
Test Case Editor.
les to test the behavior
under conditions, which
can not be triggered
otherwise, for example to
implement fault injection
 Log values of variables to
be reference
later.
anytime
 Run script function for
performing any kind of
action
You want to check what
else is new: Link to log file
(all changes, new features,
etc.)
Page 3
WINIDEA
BLUEPRINT
OPEN
A year ago iSYSTEM did
launch a complete line of
Cortex-M development
tools. A line of hardware
platforms spanning zero
cost to a high end analysis
platform is complemented
by a powerful software sui-
 winIDEA Open is now
integrated in Infineon
DAVE™ ...
requiring no code instrumentation rounds up this
unique toolsuite.
What‘s new?
 Compiler support: GCC
unlimited, all other compilers can be used and
tested based on a
32Kbyte download limit
What is Infineon DAVE™?
Eclipse IDE Framework,
Code Generation Environment, it is from Infineon
and integrates iSYSTEM
tools … click
on the logo for
more
information about
DAVE™.
iSYSTEM provides a free
debugger, winIDEA Open
that can be installed in
DAVE™ to enhance the
debugging capabilities in
DAVE™.
te winIDEA/winIDEA Open
and testIDEA. winIDEA Open is completely free, without code size limitation
and operates with popular
third party hardware.
testIDEA a test test tool
 Cortex Example Projects
SEMICONDUCTOR
NEWS
Renesas
http://www.isystem.com/supported-mcus/tricore
Infineon TriCore
TC233LP, TC234LP, TC237LP, TC274D, TC274DE
winIDEA for Renesas E1 is
available since a couple of
weeks. Now Renesas bundled iSYSTEM’s Embedded
Software Develoment Environment with their newest
Starterkits for RH850F1L.
Freescale
iSYSTEM @Freescale
Events:
 DwF Poland (June 24,
2014)
 Abendseminare
Friedrichshafen
(September 2014), Sindelfingen (October 2014)
Infineon
iSYSTEM @Infineon
Events,:
 XMC Developer Day, Mu-
nich 25.6., Milano 1.7.
MISC
Every month we do release
support for a huge number
of MCUs —>
on the web for boards
from Infineon, ST Microelectronics, Freescale,
Spansion and NXP (more
to follow)
More Information:
isystem.com/
download/
winideaopen
Explore a simple
Cortex-M
debugger
hardware from
iSYSTEM:
isystem.com/itag
Or
DOWNLOAD TUTORIAL
http://www.isystem.com/supported-mcus/cortex
Freescale Kinetis Cortex M3
MKL26Z32, MKL26Z64, MKL26Z128, MKL26Z256
http://www.isystem.com/supported-mcus/cortex
Fujitsu Cortex M3
MB9BF506, MB9BF521, MB9BF522, MB9BF524, MB9BF566, MB9BF567,
MB9BF568
http://www.isystem.com/supported-mcus/cortex
NXP Cortex M3
LPC1517, LPC1518, LPC1519, LPC1547, LPC1548, LPC1549
http://www.isystem.com/supported-mcus/cortex
ST Cortex M3
STM32F302CB, STM32F302CC, STM32F302RB, STM32F302RC, STM32F302VB,
STM32F302VC, STM32F303CB, STM32F303CC, STM32F303RB, STM32F303RC,
STM32F303VB, STM32F303VC, STM32F373C8, STM32F373CB, STM32F373CC,
STM32F373R8, STM32F373RB, STM32F373RC, STM32F373V8, STM32F373VB,
STM32F373VC
http://www.isystem.com/supported-mcus/cortex
Fujitsu Cortex R4
MB9EF226, MB9DF126
… and much more … Check out www.isystem.com/supported-mcus
Page4
BLUEPRINT
iC6000
With Aurora Protocol Support
iSYSTEM Real-time Embedded Software
Development, Test and Measurement Tool
Platform
HIGHLIGHTS
iC5000 platform:
Two Debug/Trace Module
(DTM) Options:
 AURORA/DAP for Infineon AURIX
( order # IC60023)
Debug: JTAG,
DAP, DAP2, ...
 Trace: NEXUS,
ETM
 All architectures
 Optional IO
Module
 AURORA/JTAG for
iC6000 platform:
 Freescale: up to 4 Rx

Debug: JTAG,
DAP, DAP2, ...
 Trace: Aurora
 Infineon TriCore
(Aurix)
 Freescale Qorivva
(57xx, ...)

AND
Freescale Qorivva Power
Architecture
(order # IC60022)
AURORA Trace
 Max. Configuration: 8 Rx
Lanes, 4 Tx Lanes
Lanes at 1.25 GHz, i.e.
up to 4 x 1.25 GBit/s =
5 GBit/s
 Infineon:
1 Rx
Lane at 2.5 GHz, i.e. up
to 2.5 GBit/s
Trace Memory
 8 GByte
 Connectivity
 USB 3.0 (4.8 GBit/s) or
Ethernet
Two Cable Option according
to the MCU family in use:
 22-pin High-speed Aurora cable (order #
IC60040) to connect to
Infineon AURIX
 With Samtec 22-pin
debug connector
FACTS
 A matching part from
Samtec to be put on
the target (e.g., ASP137969-01)
 34-pin High-speed Auro-
ra cable (order #
IC60041) to connect to
Freescale MPC57xx or
SPC57xx
 With Samtec 34-pin
debug connector
 A matching part from
Samtec to be put on
the target (e.g., ASP137973-01)
For mor information:
Technical Notes iC6000
Debug and Analyzer Platform for AURORA Debug
and Trace:
 Freescale MCUs
 Infineon MCUs
 Hardware Reference
Manual iC6000
Page 5
BLUEPRINT
AUTOSAR/OSEK
Developing embedded software based on a Real-Time
Operating System (RTOS)
can be supported by the
debugger making it aware
of the underlying RTOS. In
other words, the debugger
understands the structure
of the RTOS and its elements such as tasks, interru pts , a la rms , etc. .
For applications, based on
an AUTOSAR/OSEK compliant OS such as ERIKA Enterprise, the OSEK RunTime Interface (OTRI) file is
a method for describing the
structure of the RTOS to
the debugger. By reading in
the ORTI file generated by
the RTDRUID when building
an ERIKA-based application, the winIDEA debugger
becomes ERIKA Enterprise
OS-aware.
OS
AWARENESS
ERIKA Enterprise OS objects selected by the user
are recorded and displayed by the winIDEA
Profiler.
 Analysis of CPU Utilization (Profiler Statistics) of
Tasks and Interrupts (ISR
Category 1 and 2). The
Trace Analyzer of winIDEA
also provides statistical
information about OS
objects, such as Tasks
and Interrupts.



Min/Max/Avg Net
and GrossTime
Min/Max/Avg Call
Time
Min/Max/Avg Perio
ERIKA Enterprise OS awareness provides the following
features:
Display of OS Resources
and Status. A dedicated
window of the winIDEA IDE
reports the resources and
the current status of the
ERIKA Enterprise OS.
This includes:





iSYSTEM tools do
support all
AUTOSAR/OSEK
Operating
Systems available
on the market
today
Currently running
Task
Currently running
ISR
Status of each Task
Stack Utilization for
Etc.
 Run-Time
Analysis
(Profiler Timeline) of
Tasks and Interrupts (ISR
Category 1 and 2). The
Trace Analyzer of winIDEA
automatically configures
the on-chip trace logic of
the micro controller,
based on the information
provided by the ORTI file.
The state changes of all
A right-mouse click on the
selects OS object opens a
Properties window, which
summarizes all Timing Information such as
Page6
BLUEPRINT
Testing
Semiconductors
3rd Party Debugger Hardware
RTOS
Multicore
Measurement
Connectivity
UML
iSYSTEM Partner Network
XCP
isystem.com/download/winidea-testidea-apis
Simulation
Scripting
Modelling
Calibration
Diagnostics
Starter Kits
quality products, services
and support as well as
modular and easy to use
products. Connectivity to
other products along the
design-V enables our
customers to seamlessly
integrate iSYSTEM tools
into their development
process. The success of
Our vision is to easily enable developers and
testers to use embedded development and test
tools from iSYSTEM within the complete
development process. Our mission is to develop
and produce development and test tools for realtime embedded applications. We provide high
such a strategy also
depends on partners who
follow and live the same
strategy. In the last couple
of years, iSYSTEM worked
together with different
embedd ed tool and
solution providers to
implement a generic
approach of connectivity
LIEBERLIEBER—UML
DEBUGGING
LieberLieber Software and
iSYSTEM cooperate to provide a seamless tool chain
for testing and debugging
of embedded software at
the model level. This enables embedded systems
software developers using
model-based UML tools, to
test and debug directly in
the model.
TIMING
ARCHITECTS—MULTICORE
iSYSTEM is co-operating
with Timing-Architects as
well as research institutes
in order to address future
challenges of multicore
embedded system development and test. Current ZIM
project is named Zelos3 …
along the embedded
software / hardware
development and test
process. All connectivity is
based on iSYSTEM's
Generic
Tool
API
isystem.connect.
Page 7
BLUEPRINT
ADACORE—CODE
COVERAGE
iSYSTEM has worked with
AdaCore to facilitate the
integration of Nexus Program Trace message data
into AdaCore's GNATcoverage product, providing a
coverage analysis tool
which works with noninstrumented code running
on the actual target hardware.
AdaCore Releases New
Version of GNATcoverage
Dynamic Analysis Tool
RAZORCAT-UNIT
TEST
TESSY V3.1 features an
interface to the iSYSTEM
Test Tools. Using this interface, TESSY V3.1 can be
used to perform unit tests
on the unchanged user
application (Original Binary
Test, OBT). This combination allows using the comfortable test data input and
In this press release AdaCore announced the release
of GNATcoverage 1.2, the
latest version of its source
and object code coverage
analysis tool. GNATcoverage’s innovative technology
RENESAS—STARTER
Renesas Starter Kit for
RH850/F1L including
winIDEA for Renesas E1
Debugger.
VECTOR
KIT
FOR
XCP Integrated Software
Development with iSYSTEM
and Vector Tools - Development, measurement, test
and calibration of embedded software through any
debug interfaces and for a
variety of microcontroller
management features of
TESSY together with the
test execution on the target
hardware by iSYSTEM
Tools.
RH850/F1L
Starter Kit User's Manual
(page 20).
Getting Started with
winIDEA for Renesas E1
INFORMATIK—ECU
does not require instrumentation of the executable, and this new product
release supports usage
with an iSYSTEM hardware
probe generating Nexus
trace data. For the full
press release, please click
on the link within this paragraph.
TEST,
iSYSTEM AG supports the
Universal Measurement
and Calibration Protocol
(XCP) in its integrated develop ment env iro nment
winIDEA. It is a standard
plug-in within winIDEA.
winIDEA implements XCP
For more information about
licensing winIDEA for
Renesas E1, please contact sales@isystem.com.
XCP
slave functionality. It supports XCP over TCP/IP and
XCP over UDP/IP. An XCP
master can connect to
winIDEA in order to perform
measurement and calibration on the connected ECU.
INFINEON—DAVE™
iSYSTEM provides a free
debugger, winIDEA Open
that can be installed in
DAVE to enhance the debugging capabilities in
DAVE™.
DOWNLOAD TUTORIAL
DA V E ™ is a h ig h productivity development
platform for the XMC
microcontroller families to
simplify and shorten SW
development. With DAVE™
developers can generate
the SW library to efficiently
use the innovative application-optimized peripherals.
Code generation is based
on predefined and tested
application-oriented SW
components, called DAVE™
Apps. DAVE™ Apps are SW
building blocks for a wide
range of application use
cases. The generated code
can be used via well documented APIs directly in
DAVE™ or can be imported
in 3rd party compiler tools
There are much
more solutions
from within the
iSYSTEM tool
partner
ecosystem —>
BLUEPRINT
THE
iSYSTEM AG für
Informatiksysteme
Carl-Zeiss-Str. 1
85247 Schwabhausen
Germany
Phone: +49(8138)6971-0
Fax: +49(8138)6971-46
E-mail: info@isystem.com
Web: www.isystem.com
Commercial register of the
local courts (Amtsgericht)
München HRB 148751
VAT identification number:
DE128231221
Board of Management:
Erol Simsek, Werner Fischer,
Martin Gröstenberger
LAST
PAGE
—
ABOUT
ISYSTEM
iSYSTEM is a privately held company headquartered in Germany, close to Munich. Since its
foundation in 1986, iSYSTEM is an independent manufacturer and provider of embedded
software debugging and test tools. Beside standard products iSYSTEM offers development
and production services for custom designs, projects and OEM products.
iSYSTEM’s Blue Box Technology stands for fast and easy microcontroller access via any
kind of microcontroller debug interface. No matter whether one is developing, debugging or
testing embedded software on a real target system. iSYSTEM’s open and integrated Debug
and Test Software enables engineers to drive a Blue Box and the corresponding development.
iSYSTEM maintains long standing and close relationships with all major semiconductor,
operating system and compiler companies worldwide. This guarantees quick tool availability and the highest level of integration.
iSYSTEM is a ISO9001:2008 certified company.
Responsible for the content
§ 10 Absatz 3 MDStV:
Erol Simsek
R&D and Manufacturing Slovenia
“We are continually
impressed with how
much energy and
passion our teams
tackle the
challenges of the
iSYSTEM prospects
and customers
world-wide”
iSYSTEM Germany:
Support, Systems
Engineering, Logistics,
Sales, Marketing