ORDERING REPLACEMENT PARTS
To order replacement parts, contact the ICON Health & Fitness, Ltd. office, or write:
ICON Health & Fitness, Ltd.
Unit 4
Revie Road Industrial Estate
Revie Road
Beeston
Leeds, LS11 8JG
UK
Model No. WETL20001
Serial No.
USER'S MANUAL
Serial Number Decal
Tel:
08457-089009
Outside the UK: 0 (044) 113 387 7133
Fax: 0 (044) 113 387 7125
When ordering parts, please be prepared to give the following information:
• The MODEL NUMBER OF THE PRODUCT (WETL20001)
• The NAME OF THE PRODUCT (WESLO CADENCE® 620 treadmill)
• The SERIAL NUMBER OF THE PRODUCT (see the front cover of this manual)
• The KEY NUMBER AND DESCRIPTION OF THE PART(S) (see the PART LIST and the EXPLODED
DRAWING attached in the centre of this manual)
QUESTIONS?
As a manufacturer, we are
committed to providing
complete customer satisfaction.
If you have questions, or if
there are missing parts, please
call:
08457-089009
Or write:
ICON Health & Fitness, Ltd.
Unit 4
Revie Road Industrial Estate
Revie Road
Beeston
Leeds LS7 2AA
CAUTION
WESLO is a registered trademark of ICON Health & Fitness, Inc.
Part No. 174981 R0601A
Printed in USA © 2001 ICON Health & Fitness, Inc.
Read all precautions and instructions in this manual before using
this equipment. Save this manual
for future reference.
Visit our website at
www.weslo.com
Training Zone Exercise
TABLE OF CONTENTS
IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
OPERATION AND ADJUSTMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
HOW TO FOLD AND MOVE THE TREADMILL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
MAINTENANCE AND TROUBLE-SHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
CONDITIONING GUIDELINES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
ORDERING REPLACEMENT PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover
After warming up, increase the intensity of your exercise until your pulse is in your training zone for 20 to
60 minutes. (During the first few weeks of your exercise program, do not keep your pulse in your training
zone for longer than 20 minutes.) Breathe regularly
and deeply as you exercise—never hold your breath.
to cool down. This will increase the flexibility of your
muscles and will help to prevent post-exercise problems.
Exercise Frequency
To maintain or improve your condition, complete three
workouts each week, with at least one day of rest between workouts. After a few months, you may complete up to five workouts each week if desired.
Cooling Down
Finish each workout with 5 to 10 minutes of stretching
The key to success is to make exercise a regular and
enjoyable part of your everyday life.
Note: An EXPLODED DRAWING and a PART LIST are attached in the centre of this manual.
SUGGESTED STRETCHES
IMPORTANT PRECAUTIONS
WARNING: To reduce the risk of burns, fire, electric shock, or injury to persons, read the
following important precautions and information before operating the treadmill.
1. It is the responsibility of the owner to ensure
that all users of this treadmill are adequately
informed of all warnings and precautions.
2. Use the treadmill only as described in this
manual.
3. Place the treadmill on a level surface, with
2 m (8 ft.) of clearance behind it. Do not place
the treadmill on any surface that blocks air
openings. To protect the floor or carpet from
damage, place a mat under the treadmill.
4. When choosing a location for the treadmill,
make sure that the location and position permit access to a plug.
5. Keep the treadmill indoors, away from moisture and dust. Do not put the treadmill in a
garage or covered patio, or near water.
6. Do not operate the treadmill where aerosol
products are used or where oxygen is being
administered.
7. Keep children under the age of 12 and pets
away from the treadmill at all times.
8. The treadmill should not be used by persons
weighing more than 115 kg (250 lbs.). Never
allow more than one person on the treadmill
at a time.
9
2
Wear appropriate exercise clothing when
using the treadmill. Do not wear loose cloth-
1
The correct form for several basic stretches is shown at the right.
Move slowly as you stretch—never bounce.
ing that could become caught in the treadmill.
Athletic support clothes are recommended for
both men and women. Always wear athletic
shoes. Never use the treadmill with bare feet,
wearing only stockings, or in sandals.
1. Toe Touch Stretch
Stand with your knees bent slightly and slowly bend forward from
your hips. Allow your back and shoulders to relax as you reach
down toward your toes as far as possible. Hold for 15 counts, then
relax. Repeat 3 times. Stretches: Hamstrings, back of knees, and
back.
2. Hamstring Stretch
10. When connecting the power cord (see page
7), plug the power cord into an earthed circuit. No other appliance should be on the
same circuit. When replacing the fuse, an
ASTA approved BS1362 type should be fitted
to the fuse carrier. A 13 amp fuse should be
used.
Sit with one leg extended. Bring the sole of the opposite foot toward you and rest it against the inner thigh of your extended leg.
Reach toward your toes as far as possible. Hold for 15 counts,
then relax. Repeat 3 times for each leg. Stretches: Hamstrings,
lower back, and groin.
11. If an extension cord is needed, use only a 3conductor, 1mm2 (14-gauge) cord that is no
longer than 1.5 m (5 ft.).
With one leg in front of the other, reach forward and place your
hands against a wall. Keep your back leg straight and your back
foot flat on the floor. Bend your front leg, lean forward and move
your hips toward the wall. Hold for 15 counts, then relax. Repeat 3
times for each leg. To cause further stretching of the achilles tendons, bend your back leg as well. Stretches: Calves, achilles tendons, and ankles.
12. Keep the power cord away from heated surfaces.
13. Never move the walking belt whilst the power
is turned off. Do not operate the treadmill if
the power cord or plug is damaged, or if the
treadmill is not working properly. (See
BEFORE YOU BEGIN on page 4 if the treadmill is not working properly.)
14. Never start the treadmill whilst you are standing on the walking belt. Always hold the
handrails whilst using the treadmill.
15. The treadmill is capable of high speeds.
Adjust the speed in small increments to avoid
sudden jumps in speed.
2
3
3. Calf/Achilles Stretch
4
4. Quadriceps Stretch
With one hand against a wall for balance, reach back and grasp
one foot with your other hand. Bring your heel as close to your
buttocks as possible. Hold for 15 counts, then relax. Repeat 3
times for both legs. Stretches: Quadriceps and hip muscles.
5
5. Inner Thigh Stretch
Sit with the soles of your feet together and your knees outward.
Pull your feet toward your groin area as far as possible. Hold for
15 counts, then relax. Repeat 3 times. Stretches: Quadriceps and
hip muscles.
15
CONDITIONING GUIDELINES
Burning Fat
WARNING:
Before beginning
this or any exercise program, consult your
physician. This is especially important for individuals over the age of 35 or individuals
with pre-existing health problems.
The following guidelines will help you to plan your exercise program. For more detailed information about
exercise, obtain a book or consult your physician.
EXERCISE INTENSITY
Whether your goal is to burn fat or strengthen your cardiovascular system, the key to achieving the desired
results is to exercise with the proper intensity. The
proper intensity level can be found by using your heart
rate as a guide. For effective exercise, your heart rate
should be maintained at a level between 70% and 85%
of your maximum heart rate as you exercise. This is
known as your training zone.
You can find your training zone in the table below.
Training zones are listed according to age and physical
condition.
Training Zone (Beats/Min.)
14
Age
Unconditioned
Conditioned
20
138-167
133-162
25
136-166
132-160
30
135-164
130-158
35
134-162
129-156
40
132-161
127-155
45
131-159
125-153
50
129-156
124-150
55
127-155
122-149
60
126-153
121-147
65
125-151
119-145
70
123-150
118-144
75
122-147
117-142
80
120-146
115-140
85
118-144
114-139
To burn fat, you must exercise at a low intensity level
for a sustained period of time. During the first few
minutes of exercise, your body uses easily accessible
carbohydrate calories for energy. Only after the first few
minutes of exercise does your body begin to use stored
fat calories for energy. If your goal is to burn fat, adjust
the intensity of your exercise until your heart rate is
near the low end of your training zone as you exercise.
Aerobic Exercise
If your goal is to strengthen your cardiovascular system, your exercise must be “aerobic.” Aerobic exercise
is activity that requires large amounts of oxygen for
prolonged periods of time. This increases the demand
on the heart to pump blood to the muscles, and on the
lungs to oxygenate the blood. For aerobic exercise,
adjust the intensity of your exercise until your heart
rate is near the middle of your training zone.
HOW TO MEASURE YOUR HEART RATE
To measure your
heart rate, place
two fingers on
your wrist as
shown. Stop exercising and take
a six-second
heartbeat count.
Multiply the result
by ten to find your
heart rate. (A six-second count is used because your
heart rate drops quickly when you stop exercising.) If
your heart rate is too high, decrease the intensity of
your exercise. If your heart rate is too low, increase the
intensity of your exercise.
WORKOUT GUIDELINES
16. Never leave the treadmill unattended whilst it
is running. Always remove the key and unplug
the power cord when the treadmill is not in
use.
17. Do not attempt to raise, lower, or move the
treadmill until it is properly assembled. (See
ASSEMBLY on page 5, and HOW TO FOLD
AND MOVE THE TREADMILL on page 11.)
You must be able to safely lift 20 kg (45 lbs.)
in order to raise, lower, or move the treadmill.
18. Do not change the incline of the treadmill by
placing objects under the treadmill.
21. Never drop or insert any object into any
opening.
22.
DANGER: Always unplug the power
cord immediately after use, before cleaning
the treadmill, and before performing the maintenance and adjustment procedures described in this manual. Never remove the
motor hood unless instructed to do so by an
authorised service representative. Servicing
other than the procedures in this manual
should be performed by an authorised service
representative only.
19. When folding or moving the treadmill, make
sure that the storage latch is fully closed.
23. This treadmill is intended for in-home use
only. Do not use this treadmill in any commercial, rental, or institutional setting.
20. Inspect and tighten all parts of the treadmill
regularly.
SAVE THESE INSTRUCTIONS
The decals shown below have been placed on your treadmill in the indicated location. If a decal is missing, or if it is not legible, please call our Customer Service Department to order a free replacement decal
(see ORDERING REPLACEMENT PARTS on the back cover of this manual). Apply the decal in the location
shown.
Note: The decal below is shown at 38% of actual size.
Each workout should include three basic parts: (1) a
warm-up, (2) training zone exercise, and (3) a
cool-down.
Warming Up
Warming up prepares the body for exercise by increasing circulation, delivering more oxygen to the muscles
and raising the body temperature. Begin each workout
with 5 to 10 minutes of stretching and light exercise to
warm up (see SUGGESTED STRETCHES on page 15).
3
PROBLEM: The walking belt is off-centre
BEFORE YOU BEGIN
Thank you for selecting the WESLO® CADENCE 620
treadmill. The CADENCE 620 treadmill combines
advanced technology with innovative design to let you
enjoy an excellent form of cardiovascular exercise in
the convenience and privacy of your home. And when
you’re not exercising, the unique CADENCE 620 can
be folded up, requiring less than half the floor space of
other treadmills.
For your benefit, read this manual carefully before
using the treadmill. If you have additional questions,
please call our Customer Service Department at
08457-089009. To help us assist you, please note the
product model number and serial number before calling. The model number of the treadmill is WETL20001.
The serial number can be found on a decal attached to
the treadmill (see the front cover of this manual for the
location).
Before reading further, please look at the drawing
below and familiarise yourself with the parts that are
labelled.
Water Bottle Holder
(Bottle not included)
SOLUTION: a. If the walking belt has shifted to the left, first remove the key and UNPLUG THE POWER CORD.
Using the allen wrench, turn the right adjustment bolt
counterclockwise 1/4 of a turn. Plug in the power
cord, insert the key and run the treadmill for a few
minutes. Repeat until the walking belt is centred.
b. If the walking belt has shifted to the right, first remove the key and UNPLUG THE POWER CORD.
Using the allen wrench, turn the right adjustment bolt
clockwise 1/4 of a turn. Plug in the power cord, insert
the key and run the treadmill for a few minutes.
Repeat until the walking belt is centred.
a
b
Console
Handrail
Key/Clip
Handrail
LEFT SIDE
RIGHT SIDE
Hood
Walking Belt
Power Cord
Grip Tape
Front Wheel
Circuit
Breaker
Rear Roller
Adjustment Bolt
Incline Leg
WARNING:
Before beginning this or any exercise program, consult your physician. This
is especially important for persons over the age of 35 or persons with pre-existing health problems.
Read all instructions before using. ICON assumes no responsibility for personal injury or property
damage sustained by or through the use of this product.
4
13
MAINTENANCE AND TROUBLE-SHOOTING
ASSEMBLY
Most treadmill problems can be solved by following the steps below. Find the symptom that applies, and
follow the steps listed. If further assistance is needed, please call Customer Service at 08457-089009.
Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials; do not
dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking
belt is coated with high-performance lubricant. During shipping, a small amount of lubricant may be transferred to
the top of the walking belt or the shipping carton. This does not affect treadmill performance. If there is lubricant
on top of the walking belt, simply wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner.
PROBLEM: The power does not turn on
SOLUTION: a. Make sure that the power cord is plugged into a properly earthed outlet. (See HOW TO PLUG IN
THE POWER CORD on page 7.) If an extension cord is needed, use only a 3-conductor, 1mm2
(14-gauge) cord that is no longer than 1.5 m (5 ft.).
b. After the power cord has been plugged in, make sure that the key is fully inserted into the console.
c. Check the circuit breaker located on the treadmill
near the power cord. If the switch protrudes as
shown, the circuit breaker has tripped. To reset the
circuit breaker, wait for five minutes and then press
the switch back in.
Assembly requires the included allen wrench
and your own phillips screwdriver
two adjustable spanners
, and 9/16 socket spanner
.
If further assistance is needed, please call our Customer Service Department at 08457-089009.
1. With the help of a second person, carefully raise the
Right and Left Handrails (6, 7) to the position shown.
c
Tripped
1
7
Reset
Tripped
,
6
Reset
PROBLEM: The power turns off during use
SOLUTION: a. Check the circuit breaker located on the treadmill frame near the power cord (see 1. c. above). If
the circuit breaker has tripped, wait for five minutes and then press the switch back in.
b. Make sure that the power cord is plugged in.
c. Remove the key from the console. Reinsert the key fully into the console.
2. Using two adjustable spanners, attach the Wheels (15) to
the Base (80) with the two Wheel Bolts (14) and Wheel
Nuts (42) as shown. Do not overtighten the Wheel
Bolts; the Wheels should spin freely.
d. If the treadmill still will not run, please call our Customer Service Department.
PROBLEM: The displays of the console do not function properly
2
15
42
14
SOLUTION: a. Check the batteries in the console. See assembly step 7 on page 6. Most problems are the result
of drained batteries.
b. Remove the key from the console and UNPLUG THE
POWER CORD. Remove the screws from the hood.
Carefully remove the hood. Locate the Reed Switch
(46) and the Magnet (49) on the left side of the Pulley
(53). Turn the Pulley until the Magnet is aligned with
the Reed Switch. Make sure that the gap between
the Magnet and the Reed Switch is about 3 mm
(1/8 in.). If necessary, loosen the Screw (26) and
move the Reed Switch slightly. Retighten the Screw.
Re-attach the hood, and run the treadmill for a few
minutes to check for a correct speed reading.
3 mm
15
80
53
26
42
49
46
Top View
3. With the help of a second person, carefully tip the treadmill onto its left side. Hold the Base (80) against the Right
Handrail (6) and the Left Handrail (not shown). Make
sure that the Wheels (15) are in the position shown.
Using a 9/16 socket spanner, attach the Base (80) to the
Right Handrail (6) with two Handrail Bolts (12), two
Handrail Washers (85), and two Handrail Nuts (17). Do
not tighten the Handrail Bolts yet. Attach the Base to
the Left Handrail (not shown) with two Handrail Bolts
(12), two Handrail Washers (85), and two Handrail Nuts
(17). Then, tighten all four Handrail Bolts (12).
3
12
15
17
6
85
80
Tip the treadmill back to the position shown in step 1.
12
5
4. Loosen the two Console Bolts (9) underneath the
Console (1). Rotate the Console to the position shown.
Push the Right and Left Handrails (6, 7) inward as you
tighten the two Console Bolts.
HOW TO FOLD AND MOVE THE TREADMILL
4
1
HOW TO FOLD THE TREADMILL FOR STORAGE
6
7
9
5. Note: You must be able to safely lift 20 kg (45 lbs.) in
order to do this step.
Unplug the power cord. CAUTION: You must be able to
safely lift 20 kg (45 lbs.) in order to raise, lower, or move the
treadmill.
1. Hold the treadmill with your hands in the locations shown at the
right. CAUTION: To decrease the possibility of injury, bend
your legs and keep your back straight. As you raise the
treadmill, make sure to lift with your legs rather than your
back. Raise the treadmill about halfway to the vertical position.
5
Hold the treadmill with your hands in the locations shown.
CAUTION: To decrease the possibility of injury, bend
your legs and keep your back straight. As you raise
the treadmill, make sure to lift with your legs rather
than your back. Raise the treadmill to the vertical position.
2. Move your right hand to the position shown and hold the treadmill firmly. Raise the treadmill until the latch pin is aligned with
the hole in the handrail. Slide the latch pin into the hole. Make
sure that the latch pin is inserted as far as possible into
the hole. Lock the pin by pressing the end of the pin into the
slot in the storage latch as shown in the inset drawing.
To protect the floor or carpet from damage, place a mat
under the treadmill. Keep the treadmill out of direct sunlight. Do not leave the treadmill in the storage position in
temperatures above 30° C (85° F).
6. Make sure that the Latch Pin (78) is in the Storage Latch
(77) as shown.
Latch
Pin
Hole
Slot
HOW TO MOVE THE TREADMILL
55
77
77
5
78
Before moving the treadmill, convert the treadmill to the storage
position. Make sure that the latch pin is fully inserted into the
hole in the handrail and locked into place.
Hole
78
1. Hold the handrails and place one foot on the base as shown.
7
2. Tilt the treadmill back until it rolls freely on the front wheels.
Carefully move the treadmill to the desired location. Never
move the treadmill without tipping it back. To reduce the
risk of injury, use extreme caution whilst moving the treadmill. Do not attempt to move the treadmill over an uneven
surface.
7
8
6
3. Place one foot on the base, and carefully lower the treadmill
until it is resting in the storage position.
Batteries
Battery
Cover Tab
8. Make sure that all parts are tightened before you use the treadmill. Keep the included allen wrench in a
secure place. The allen wrench is used to adjust the walking belt (see page 13). To protect the floor or carpet,
place a mat under the treadmill.
6
2
6
Attach the Storage Latch (77) to the Frame (55) with the
three Screws (5). Do not tighten the Screws yet.
Position the Latch so that the Latch Pin (78) is aligned
with the hole in the Left Handrail (7). Slide the Latch Pin
into the hole as shown in the inset drawing. Then, tighten
the three Screws.
7. The console requires two 1.5V batteries (included).
Alkaline batteries are recommended. To install batteries,
first touch the Handrail (6) to discharge any static.
Next, open the Battery Cover (8). Press two batteries into
the battery compartment, with the negative (–) ends of
the batteries touching the springs. Close the battery
cover, push up on the tab, and then push the tab forward
as shown in the inset drawing. Be sure that the tab locks
into place.
1
Base
Front Wheels
HOW TO LOWER THE TREADMILL FOR USE
1. Refer to drawing 2 above. Hold the treadmill with your right hand as shown. Using your left hand, slide the latch
pin to the right. Lock the pin in place by pressing the end of the pin into the slot in the storage latch as shown in
the inset drawing.
2. Refer to drawing 1 above. Hold the treadmill firmly with both hands, and lower the treadmill to the floor. To decrease the possibility of injury, bend your legs and keep your back straight.
11
HOW TO CHANGE THE INCLINE OF THE TREADMILL
To vary the intensity of your exercise, the incline of the
treadmill can be changed. There are two incline levels.
Before changing the incline, remove the key and
unplug the power cord.
To change the incline, raise the back of the treadmill
and rotate the incline leg until it rests against the
treadmill frame as shown at the right. CAUTION:
Before using the treadmill, make sure that the
frame is resting on the incline leg.
Low
Incline
Level
OPERATION AND ADJUSTMENT
Frame
THE PERFORMANT LUBETM WALKING BELT
Your treadmill features a walking belt coated with PERFORMANT LUBETM, a high-performance lubricant. IMPORTANT: Never apply silicone spray or other substances to the walking belt or the walking platform. Such
substances will deteriorate the walking belt and cause excessive wear.
Incline Leg
High
Incline
Level
HOW TO PLUG IN THE POWER CORD
Frame
Incline Leg
This product must be earthed. If it should malfunction or break
down, earthing provides a path of least resistance for electric
current to reduce the risk of electric shock. This product is
equipped with a cord having an equipment-earthing conductor and
an earthing plug.
Two power cords are included. Select the one that will fit your
outlet. Refer to drawing 1, and plug the indicated end of the
power cord into the socket on the treadmill. Refer to drawing
2. Plug the power cord into an appropriate outlet that is properly installed and earthed in accordance with all local codes
and ordinances. Note: In Italy, an adaptor (not included) must
be used between the power cord and the outlet. Important:
The treadmill is not compatible with GFCI-equipped outlets.
1
Socket on treadmill
2
Outlet
DANGER:
Improper connection of the
equipment-earthing conductor can result in an increased risk of electric shock. Check with a qualified
electrician or serviceman if you are in doubt as to
whether the product is properly earthed. Do not modify the plug provided with the product—if it will not fit
the outlet, have a proper outlet installed by a qualified
electrician.
10
7
DIAGRAM OF THE CONSOLE
Follow the steps below to operate the console.
1
2
On/Reset Button
Speed Control
Next, slowly turn the speed control until the walking belt begins to move at slow speed. Carefully
step onto the walking belt and begin exercising.
Change the speed of the walking belt as desired
by turning the speed control.
Key
To stop the walking belt, step onto the foot rails
and turn the speed control to the Reset position.
Clip
3
STEP-BY-STEP CONSOLE OPERATION
console, read the following precautions.
• Do not stand on the walking belt when turning on the power.
• Always wear the clip (see the drawing above)
whilst operating the treadmill. When the key
is removed from the console, the walking
belt will stop.
• Adjust the speed in small increments.
• To reduce the possibility of electric shock,
keep the console dry. Avoid spilling liquids
on the console and use only a sealable water
bottle.
8
Reset the console and start the walking belt.
Turn the speed control to the Reset position.
Note: Each time the walking belt is stopped,
the speed control must be turned to the Reset
position before the walking belt can be
restarted.
Water Bottle
Holder
(Water bottle
is not included)
CAUTION: Before operating the
Insert the key fully into the power switch.
Calories—This mode shows the approximate
number of calories you have burned.
Note: Inserting the key will not turn on the display.
The display will turn on when the On/Reset button
is pressed or when the walking belt is started. (If
you just installed batteries, the display will already
be on.)
Display
If there is a thin sheet of clear
plastic on the face of the console, remove it.
Fat Calories—This mode shows the approximate number of fat calories you have burned.
(See BURNING FAT on page 14.)
Before the console can be operated, two 1.5V
batteries must be installed (see assembly step 7 on
page 6).
Next, make sure that the power cord is properly
plugged in (see HOW TO PLUG IN THE POWER
CORD on page 7).
Step onto the grip tape on the treadmill. Find the clip
attached to the key (see the drawing above), and slide
the clip onto the waistband of your clothing. Test the
clip by carefully taking a few steps backward until
the key is pulled from the console. If the key is not
pulled from the console, adjust the position of the
clip as necessary.
Follow your progress with the console display.
When the power is
turned on, the console will automatically
scan through five
modes. A flashing
mode indicator will
Mode Indicator
show which mode is
currently displayed.
The modes are described below.
If desired, reset the display by pressing the
On/Reset button.
4
When you are finished exercising, stop the
walking belt and remove the key.
Step onto the grip tape, turn the speed control to
the Reset position, and remove the key from the
console. The display will turn off about six minutes
after the key is removed. Note: The display will
automatically turn off any time the walking belt
is stopped and the On/Reset button is not
pressed for six minutes.
HOW TO SELECT KILOMETRES AND MILES
The console can display distance and speed in either
kilometres or miles. To change the unit of measurement, first UNPLUG THE POWER CORD. Next, remove the four screws attaching the console to the console plate. Lift the console a few inches, being careful
not to pull on the wires, and turn the console over.
Locate the small switch on the back of the console.
Move the switch upward or downward to select kilometres or miles. Re-attach the console to the console
plate. After changing the unit of measurement, remove one of the batteries from the console for
about five seconds and then reinsert it. This will
reset the console.
Screws
Speed—This mode shows your speed, in kilometres per hour or miles per hour.
Time—This mode shows the elapsed time.
Note: If you stop exercising for ten seconds or
longer, the time mode will pause.
Distance—This mode shows the total number
of kilometres or miles you have walked or run.
Switch
Screws
9
PART LIST—Model No. WETL20001
Qty.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43*
44
45
46
47
1
1
1
1
8
1
1
1
3
2
4
4
2
2
2
2
4
1
4
1
1
1
1
8
1
18
2
2
1
3
1
1
1
4
1
1
1
1
1
1
7
5
1
1
1
1
4
Description
Console
Speed Control
Key/Clip
Console Plate
Screw
Right Handrail
Left Handrail
Battery Cover
Console Bolt
Frame Pivot Bolt
Washer
Handrail Bolt
Frame Spacer
Wheel Bolt
Wheel
Base Cap
Handrail Nut
Handrail Grommet
Base Pad
Choke
Incline Warning Decal
Wire Harness
Hood
Hood Screw
Belly Pan
Small Screw
Belt Guide
Roller Spacer
Controller Ground Screw
Nylon Washer
Large Warning Decal
Controller Bracket
Controller Ground Nut
Plastic Stand-off
Controller
Motor Bolt
Fan
Motor Tension Nut
Star Washer
Motor Tension Washer
Wire Tie Screw
Motor/Frame/Wheel Nut
Motor Assembly
Pulley/Flywheel
Motor
Reed Switch
Wire Tie Clamp
Key No.
Qty.
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
#
#
#
#
#
#
#
1
1
1
1
6
1
2
1
1
1
2
1
1
8
1
2
2
1
2
2
1
1
3
1
1
1
1
1
1
1
1
2
1
1
1
1
2
4
1
1
1
1
1
1
1
Description
Reed Switch Clip
Magnet
Belt
Right Roller Adj. Bolt
Platform Screw
Front Roller/Pulley
Grip Tape
Frame
Walking Belt
Walking Platform
Incline Leg Bolt
Ground Screw
Ground Wire
8” Cable Tie
Controller Ground Wire Nut
Incline Leg
1 1/2” x 3” Plate
Incline Leg Crossbar
Roller Adj. Washer
Frame Endcap
Motor Pivot Bushing
Roller Tension Bolt
Roller Tension/Incline Leg Nut
Roller Tension Spring
Rear Roller
Releasable Wire Tie
Allen Wrench
Latch Warning Decal
Receptacle
Storage Latch
Latch Pin
Cage Nut
Base
Power Cord Set
Circuit Breaker
Filter
Motor Pivot Bushing
Handrail Washer
8” White Wire, 2/Female
4” Black Wire, Male/Flag
4” Black Wire, 2F
4” Black Wire, 2M
8” Green Wire, Ring/Flag
8” Black Wire, 2 Flag
User’s Manual
* Includes all parts shown in the box
# These parts are not illustrated
REMOVE THIS EXPLODED DRAWING
AND PART LIST FROM THE MANUAL.
Save this page for future reference.
34
Key No.
R0601A
Note: Specifications are subject to change without notice. For information about
ordering replacement parts, see the back cover of the User’s Manual.
EXPLODED DRAWING—Model No. WETL20001
R0601A
9 40
39
30 68
30
1
26
38
2
35
42
84
34
26
3
62
43*
79
84
36
44
45
32
26
20
26
4
5
37
26
46
83
7
41
50
48
11
27
78
33
28
49
53
77
52
11
13
52
58
24
64
54
5
54
24
13
56
52
27
66
67
55
72 70
71
63
19
29
24
85
70
16
33
5
15
61
60
42
41
25
65
73
47
81
19
80
19
85
5
5
63
14
12
17
59
67
12
14 22
51
66
10
15
26
58
24
11
18
23
66
70
16
42
24
57
69
12
12
28
24
21
75
6
8
9
26
74
10
42
11
5
19
76
31
82
17
5
5
5