twall®Basic16 standard Color mobile foldable User Manual Rev. 1.0

twall®Basic16 standard Color mobile
Interactive Sport and Training Device
User Manual Rev. 1.0.2
Data CD
twall®Basic16 standard Color mobile foldable
User Manual Rev. 1.0.2
Table of contents:
Hardware documentation
Product description---------------------------------------------------------------------------------------- 4
Handling according to regulations-----------------------------------------------------------------------------4
Scope of delivery-------------------------------------------------------------------------------------------- 5
Assembly-------------------------------------------------------------------------------------------------------- 6
Installation of the twall®Basic16 Standard Color mobile foldable----------------------------------------6
Maintenance--------------------------------------------------------------------------------------------------- 7
Troubleshooting--------------------------------------------------------------------------------------------- 8
6.2 Technical specifications----------------------------------------------------------------------------------- 8
Data sheet twall®Basic16 Standard Color mobile foldable------------------------------------------------8
Data sheet - Accessories-----------------------------------------------------------------------------------------8
Software documentation
Operating twall® using control panel----------------------------------------------------------------- 9
Executing twall® programs--------------------------------------------------------------------------------------9
Viewing highscores--------------------------------------------------------------------------------------------- 10
Settings----------------------------------------------------------------------------------------------------------- 10
8 8.1 8.2
8.2.1 8.2.2 8.2.3
8.4.6 8.4.7 8.5. Operating twall® using computer---------------------------------------------------------------------11
Connecting twall® to computer------------------------------------------------------------------------------ 11
Driver installation----------------------------------------------------------------------------------------------- 11
Installing drivers using Microsoft Windows XP® - -------------------------------------------------------- 11
Installing drivers using Microsoft Windows Vista®- ------------------------------------------------------ 12
Installing drivers using Windows 7®------------------------------------------------------------------------- 13
Software installation------------------------------------------------------------------------------------------- 14
Software description------------------------------------------------------------------------------------------- 15
The welcome page---------------------------------------------------------------------------------------------- 15
Program settings------------------------------------------------------------------------------------------------ 15
Executing twall® programs------------------------------------------------------------------------------------ 15
Saving programs to twall®------------------------------------------------------------------------------------ 16
Highscores------------------------------------------------------------------------------------------------------- 17
Simulating twall® programs---------------------------------------------------------------------------------- 17
Creating new twall® programs------------------------------------------------------------------------------- 18
Editing twall® programs--------------------------------------------------------------------------------------- 20
Editing Sound sets---------------------------------------------------------------------------------------------- 20
Firmware update------------------------------------------------------------------------------------------------ 21
9 Service----------------------------------------------------------------------------------------------------------23
E| 3
twall®Basic16 standard Color mobile foldable
User Manual Rev. 1.0.2
Hardware documentation
Product description
The twall® is an interactive sports device using light pulses to specifically initiate motion
sequences. At a wall consisting of evenly arranged, large pads, colored signals light up (available
separately as well as in combination) and have to be deactivated by touching them again which
defines sterical movements. Depending on the training sequence used condition, agility, the
ability to respond, and if required specific muscular endurance can be trained. The different
elements can be predefined in the program so that they light up in a selective or random
sequence, position and speed. The task is always the same: To deactivate the light as quickly as
possible by pressing the buttons.
The software-controlled program sequences provide both individual training and group training.
By controlling each touch element individually it is possible to adjust the twall® training settings
according to size, sphere of activity, visual perception as well as the tactile situation of the
person trained. Furthermore, product version twall® color allows to integrate cognitive tasks
using various colors and sounds.
Also, the small construction depth makes it easy to integrate twall® to existing room concepts.
Handling according to regulations
The use of the twall® is intended for training and game purposes of human beings exclusively.
It is strictly recommended that the operator checks if the aptitude of the training program suits
the training person. The twall® has to be operated by the provided power supply unit only.
As a precaution we would like to make you aware of the fact that the twall® control panel
generates high frequency, electric oscillations and despite compliance with legal regulations it
may effect other electronic devices such as cardiac pacemakers etc.
Please be aware that the fastening of the twall® has to be secured on site and is not within the
manufacturers obligation. The applicability of the walls should be checked and plasterboard
walls should be covered at least twice. Fixing elements such as screw anchors and tie bars must
have adequate tensile strength.
The fastening should be checked on a regular basis. In the case that fixing elements become
loose the twall® must not be used any further until the fastening has been repaired entirely.
Continuous operation of a single or all touch pads is not permitted as it can lead to a strong
heating of the LED (light-emitting diode) modules. Sequences that force a single or all touch
pads to light up for longer than 2 minutes are prohibited and can cause the loss of warranty.
4 |E
twall®Basic16 standard Color mobile foldable
User Manual Rev. 1.0.2
Scope of delivery
Overview - scope of delivery of the twall®Basic16 Standard Color mobile foldable
C Accessories (included in scope of delivery)
C1 1 x Power supply line (with Euro connector)
C2 1 x USB cable (A/B)
C3 1 x Adapter (power supply unit)
C4 1 x Allen key (6 mm | 0.24 inch)
1 x twall®Basic16 Standard Color mobile foldable
2 x Angles braces
2 x Weights
User manual and data-CD
ATTENTION: As you unpack the twall® device, check the scope of delivery and make sure that all items are
E| 5
twall®Basic16 standard Color mobile foldable
User Manual Rev. 1.0.2
ATTENTION: Before start-up a period of 1-2 hours is advised for the equipment to acclimatize. Please
pay attention to condensation that might appear.
Installation of the twall®
The twall® is delivered completely assembled.
(fig. 3.1-1). During transport without a
transport case the folded twall® must be
secured to prevent them falling and rolled
along on a level floor! Strong vibrations must
be avoided. The adjustable clamping levers next
to the joints shall be tighten slightly. Putting up
the twall® requires a firm, lever to surface of at
least 2m x 2m, that can carry a weight up to
200kg. In the event, that you have a transport
case, please take out the ballast weights, the
power supply unit and the angles braces. Afterwards you lift the twall® out of the transport
case and put it on the designated position.
Make sure to strictly observe the order
of the following steps to prevent all
moving parts from destruction!
I. Opening up the twall :
fig. 3.1-1
Step  Loosen the locking screw A from the
transport lock (fig. 3.1-2) and pull the screw
upwards until it is justified with the lower
edge of the transport lock D.
PLEASE NOTE: The transport lock is
still fix connected with the twall®.
fig. 3.1-2
Step  Undo slide safety clamping levers C
on the twall®, push them forwards on both
sides (top and bottom) und lock again, when
aligned parallel to the twall®-frame
(fig. 3.1-3)
fig. 3.1-3
Step  Now the twall® will be carefully
putted into position. For that, place your foot
against the lower edge of the frame
(fig. 3.1-4) and pull the twall® on the grips
apart. Now insert the ballast weights into the
rear part of the frame base (fig. 3.1-5).
Step  Only now remove the transport
lock D. (fig. 3.1-2)
Abb. 3.1-4
fig. 3.1-5
fig. 3.1-4
6 |E
twall®Basic16 standard Color mobile foldable
User Manual Rev. 1.0.2
Step  Flip up the upper part from the
backside with both hands (fig. 3.1-7), shut
the lateral sliders and lock the clamping levers
(fig. 3.1-8).
Concrete weights and angles braces
fig. 3.1-6
II. Attaching the angles braces:
Step  The braces (fig. 3.1-6) shall be
screwed on with the screws M8 (you can
already find them in the appropriate threads)
and under usage of the provided Allen key
6mm (ca. 25Nm). (fig. 3.1-9)
fig. 3.1-7
After installation please check all mounting members for tightness as well as stability of the twall®.
III. Establishing operational
Step  Connect the voltage connector
(attached to the right steel frame) to the 24
Volt connector of the power supply unit.
(fig. 3.1-10)
IV. Transport case (optional):
fig. 3.1-8
fig. 3.1-9
Folding up the twall® takes place in reverse
order! At least 2 persons are required for
packaging the twall® in an optional available
transport case (fig. 3.1-11).
Lift the folded twall® up and push it on the
rollers towards the rear of the transport case.
The braces could be placed down diagonally on
the sides, the ballast weights are transported
separately. Now hook in the lateral locks and fix
them by clockwise rotation.
fig. 3.1-10
fig. 3.1-11
Every sports device is constantly exposed to dust and sweat. Same applies to the twall®. During
frequent use some soil deposit may occur on the surface of the touch elements. To ensure a long
life cycle and a maintained appearance please clean the touch elements and the frame at least
once a month. In case of more frequent use we recommend twice a month. Please use a soft,
lint-free and dry cloth. In case of heavy soiling, the cloth can be used in combination with a mild
detergent or disinfectant.
ATTENTION: Never use dissolver or gas as this may damage the touch elements.
E| 7
twall®Basic16 standard Color mobile foldable
User Manual Rev. 1.0.2
Potential errors/malfunction source
Check if a sufficient power supply is available. Please pay attention that
the power supply unit is correctly connected to the twall® and the socket.
In case of interruptions, please check if enough space is provided between the sports device
and components that generate strong magnetic fields such as loudspeakers or microwaves.
Should any liquids or external items get into the inside of the twall® disconnect the twall®
from the power supply and contact your service provider.
ATTENTION: Additional help will you get from our twall® online support on “”.
In the download area (see page 22, Step ,) you can find the relevant documents for specific
troubleshooting and correction of errors as well as complaints.
Technical Specifications
Data sheet twall®Basic16 Standard Color mobile foldable
Autarkic, multicolored interactive indoor training
device twall®Basic16 Standard Color mobile foldable
Integrated control panel, 10 preinstalled training programs
Graphic program surface to create favored programs
4 x 4 touch elements
Active training area in mm | inch (H x W):
880 x 880 | 34.7 x 34.7
Dimension of whole device in mm | inch (H x W x D):1864 x 1202 x 1106 | 73.4 x 47.4 x 43.6
Weight in kg | lbs:
approx 125 | 275.6
Up to 7 fluorescent colors (red, green, blue and mixed colours)
Frame: stainless steel
Touch elements: plastic, color translucent white
Power input: 40 W
Power supply: 24 V (power supply jack and switch)
Connecting socket for power supply and power supply switch
Freestanding with transport rollers
Maintenance intervals: semi-annual and according to the terms of lease respectively
Guarantee 1 year
6.2 Data sheet – Accessories
Power supply line (with Euro connector)
USB cable (A /B)
AC adapter (power supply unit) with barrel connector (fig. 6.2-1)
• AC adapter
-- Primary:
90-264 V AC; 47-63 Hz
-- Secondary: 24 V DC; 5 A
-- Dimensions
-- (h x w x d in mm |inch):
62 x 35 x 170 | 2.55 x 1.4 x 6.7
-- Weight (in g |lbs): approx. 530 | 1.2
-- Euro connector
• Barrel connector
(fig. 6.2-2 and fig. 6.2-3)
-- Pin 1 and Pin 2 + 24 V
-- Pin 3 and Pin 4 - 0V
fig. 6.2-1
fig. 6.2-2
fig. 6.2-3
8 |E
twall®Basic16 standard Color mobile foldable
User Manual Rev. 1.0.2
Software Documentation
Operating the twall® without a computer
Using the control unit integrated in the twall® , the twall® can be fully operated without using
a computer. To this end, a menu is shown on the display which can be operated using the four
orange keys beneath the display.
 The name of the menu is always displayed in the
top line.
 The menu item currently selected is shown with
a black bar with round corners.
The arrow to the right of the item indicates that
this item is part of a menu which has additional
 The functions which can be executed with the
operating keys are shown in the bottom line.
 Use these keys to operate the menu.
When navigating the main menu and its submenus, the functions for the operating keys are
assigned as follows:
The [arrow down] key selects the menu item underneath the one currently selected.
The [arrow up ] key selects the menu item above the one currently selected.
The [ENTER] key accesses the selected submenu or activates the selected
menu item.
The [MENU] key exits the current menu.
When activating certain menu items, the assignment of the operating keys changes.
Executing twall® Programmes
In order to execute a twall® Programmes by menu, select the menu item "Programmes" in the
main menu and confirm this with [ENTER]. You are now in the submenu "programme". The
Programmes installed on the twall® are displayed. Select the desired programme using the arrow
keys and confirm with [ENTER] to start the programme. The status of the programme is now
shown on the display.
The name of the loaded programme is
always displayed in the top line.
 This is where the current programme time
is displayed.
 Status line for player 1. The three figures
mean: overall targets / targets hit / errors.
 Status line for player 2. This line is not shown
if it is a programme for one player only.
E| 9
twall®Basic16 standard Color mobile foldable
User Manual Rev. 1.0.2
The layout of the operating keys is largely identical. The [ENTER] key is replaced in this screen by
the [NEW] key with which the programmes can be restarted. The arrow keys load the next and/
or previous Programmesme in the list of twall® Programmes.
The time starts to run as soon as the first touch pad on the twall® is pressed. The end of the
programme is generally indicated by the brief flashing of all the touch pad.
Viewing high scores
Viewing high scores works in a similar way to implementing programmess. In the main menu,
select the menu item "High scores" with [ENTER]. The "High scores" menu immediately
opens, in which a list of the installed programmess is displayed. In order to display the high
scores for a specific programme, select the programme using the arrow keys and then press
[ENTER] to confirm. You can now navigate through the high score list using the arrow keys. A
high score is always shown on a screen page.
 The top line shows the programme to
which the high score list relate.
 The placings are shown here (places 1-10).
 The name of the player. As on the twall® control unit it is not possible to enter a name, the
name "Player" is stipulated automatically. If the
twall® is controlled by the computer, other
names can also be assigned (see Chapter 9.4.2)
 The "ID" value shows the sequence of the
high score entries. The most recent entry in the lists always has the highest ID.
 Shown in this line is the playing time
of the high score entry. Shorter
times produce better placings.
The "Settings" menu contains the item
"Version info" under which the following information regarding
the twall® can be accessed:
Type of twall® (exact model designation)
Hardware version
Software version
NOTE: Always quote this information when sending a service inquiry to IMM.
10 |E
twall®Basic16 standard Color mobile foldable
User Manual Rev. 1.0.2
Operating the twall® with a computer
The twall® is fully operational without a computer, using the integrated control unit. However,
certain actions, such creating as new programmess, require the use of software. The following
chapter describes how this is installed and what steps are necessary for its use.
System requirements of the PC:
Operation systems Windows 2000/XP/Vista/7
Microsoft .Net Runtime 2.0 (included on software-CD)
Processor speed min. 1.0 GHz
USB Interface
Screen resolution: 1024*768
50 MByte free HDD space
keyboard/ mouse
NOTE: The twall® drivers/software and firmware are constantly being improved. The current version at any
given time can be downloaded in the download area at For this you need the serial number
of your twall® which can be found on left side of the stainless steel frame part.
8.1 Connecting to the computer
The twall® is connected to the computer using USB. For this you need the USB cable C2
(included in the product contents). Insert the square plug into the corresponding socket into the
twall® and the flat USB connector on the computer.
When connecting the twall® to the computer for the first time, Windows will recognise this as a
new device. You must now install the driver. To do this, insert the software CD into your CD/DVD
drive. You need administrator rights on your computer for installation. The following five steps
describe the driver installation under Microsoft Windows XP® and Microsoft Vista®.
Driver installation
8.2.1 Driver installation under Microsoft Windows XP®
 The first step of the installation is
to select "No,not this time" in answer to whether the driver is to be
searched for using Windows Update.
 Select "Install software automatically (recommended)". The CD will
automatically search for the driver.
 If the required driver file "usbser.sys" is not found on your computer, you must first of all
indicate its storage location yourself. The file is located on the CD in the folder entitled
"Driver\winxp" or "Driver\win2k". Select the file in the "winxp" folder if you are using Windows
XP or the file in the "win2k" if you are using Windows 2000®.
E| 11
twall®Basic16 standard Color mobile foldable
 In this dialogue box select
"Continue installation".
User Manual Rev. 1.0.2
 The installation has now completed successfully. You can now install and use the twall® software.
 If the twall® is connected to another USB slot, the driver is installed again. This happens
automatically however. Administrator rights are required even so.
8.2.2 12 |E
Treiberinstallation unter Microsoft Windows Vista®
 The first stage of the installation
is to select "Search for and install
driver (recommended)".
 If this dialogue does not appear,
select under the green arrow
"...Show other options".
 Select "Search for driver software
on the computer (expanded)".
 Click on the key [Search] and select
the directory: Driver\vista_32bit on the
data CD. Then click on [Continue].
twall®Basic16 standard Color mobile foldable
User Manual Rev. 1.0.2
 Select "Install this driver
software anyway".
 The installation of the driver for
the twall® was completed successfully. The twall® can now be used.
 If the twall® is connected to another USB slot, the driver is installed again.
This happens automatically however. Administrator rights are required even so.
Driver installation under Microsoft 7®
 Windows attempts to install the
driver automatically. If unsuccessful, the following message is displayed. Continue to point 2.
 Start the device manager.
To do this, open Start->System control
->System and security->System.
A window with system information appears. Click on the left side
of the page on "device manager".
 In the device manager, the twall® is
shown under the category "Other devices"
and highlighted with a
yellow warning sign. Right click on
"twall" and select "Update driver".
 The driver installation assistant is now
displayed. First of all, select "Search for
driver software on the computer".
 Secondly, enter the directory containing
the driver for the twall®.
E| 13
twall®Basic16 standard Color mobile foldable
User Manual Rev. 1.0.2
CAUTION: Windows 7 is available in 32-bit and 64-bit versions. Select the driver directory which is appropriate for
your version of Windows. If you are unsure whether your version of Windows is 32-bit or 64-bit, you can check using the system information in the previously opened window.
 If the correct driver was indicated,
this is now installed. Confirm the
warning message shown with "Install this driver software anyway".
 The driver installation is now complete.
Software installation
To install the twall® software, insert the twall® software CD into your computer's CD drive. Now
start the file TwallSetup-1.0.exe and follow the on-screen instructions.
It is recommended that you select the installation type suitable for your twall®. With the installation type "Full installation", the programmes for all twall® variants are installed. However, bear
in mind that a programme for twall® variant A is not necessarily compatible with twall® variant
Select the installation type
which corresponds to your
twall® variant or full
installation to be able to
connect any twall® products
After installation, three shortcuts are located in the start menu or on the desktop, which each
start the twall® software to a different extent in terms of function:
TWall: full function (also editing settings).
TWall (only executes programmes): Allows the execution of twall® programmes
on the twall® and the simulation of twall® programmes on the computer.
TWall (executes and edits programmes): As 2. with the added option of editing twall® programmes.
Limited software variants such as these can be used on computers installed in public areas.
14 |E
twall®Basic16 standard Color mobile foldable
Description of the software
The start page
User Manual Rev. 1.0.2
After starting the software, the start page of the
software is displayed. Click on the links to
execute the corresponding action.
Programme settings
After the first programme start of the twall® software,
the programme settings should be adjusted.
 Stipulate here in which directories the twall® software is to search
for programmes and/or sounds in
order to complete the options displays for programmes and sounds.
 Add a new directory to the
list using this key.
 The key deletes the selected entry from the list.
 This is where information regarding
the connected twall® is displayed.
This information must always be
quoted in the case of service.
WARNING: The list of directories for twall® programmes contains after installation only the directories of
the standard programmes in the software's installation folder. Your own programmes should not be stored
in these directories as they would be deleted during deinstallation.
For this reason, add a directory to the list outside the twall® software installation folder
(e.g. a new directory in "Own files") in which you can save self-created programmes.
To save the settings, click on the [Save] key after you have made all the settings.
Executing the twall® programme
In this mode, you can:
execute twall® programmes located on twall®.
transfer to twall® and execute programmes located on twall®.
save loaded twall® programmes.
view high scores for twall® programmes.
E| 15
twall®Basic16 standard Color mobile foldable
User Manual Rev. 1.0.2
 List of the programmes on twall®. You
can start a programme by clicking on the
appropriate link.
 This function refreshes the list of
programmes on the twall®.
 This optionshows all the twall®
programmes which were found in the
folders to be searched for twall®.
 Using this link, you can add to the
list an individual file which is not
in one of the searched folders.
 Click on this key to send to the twall®
and start the programme s
elected in the box.
 The [Back] key takes you
back to the start page.
If a programme has been loaded, the
software changes to status display.
The status of the programme (time elapsed,
score etc.) is displayed. This is where the loaded
programme can also be saved on the twall®.
 With the waste basket symbol, the
programme site in question is emptied (deletes the programme).
 This fields indicates the current view of
the twall®.
 Current playing time.
 Status display for player 1.
 With this key, the currently loaded
programme is saved on the twall®
(only for programmes transferred from
the hard disk).
 Shows the high scores for the
 Aborts the execution of the loaded
programme. Clicking again on this key
returns the software to the "Programmes"
page. Saving programmess on the twall®
Clicking on the ["Save on twall®"] key displays
a dialogue first of all in which the programme
number must be indicated under which the
programme is to be saved. The number corresponds to the programme number in the list
of programmes available on the twall® .
16 |E
twall®Basic16 standard Color mobile foldable
User Manual Rev. 1.0.2
You have to enter a password to save a
programme on the twall®. Enter this in the
dialogue box.
NOTE: The password is located on a label which is on the last page of the user manual. Only divulge this
password to people who are also allowed to save programmes on the twall®. High scores
Clicking on the [High scores] key in the status display loads the high scores for the
programmes loaded. The most recent entry in the list is highlighted.
 The last entry added is highlighted.
 Empty entries.
 With this function, the high score
list is saved as a "high scores" file.
 Back to status display.
If the programme had been started directly from the twall®, the high scores are also read
out. If the programme was transferred from the computer to the twall®, the high scores are
saved automatically in a "high scores" file. In this case, it is also possible to enter a name when
achieving a place in the high score list. If the programme is subsequently saved on the twall®,
this high scores file can also be transferred along with the previous high scores.
Simulating the twall® programmes
The programme function "Simulate
programmes" offers you the option of
executing twall® programmes on the
computer without needing a twall® itself.
This can be useful when newly created
programmes are to be tested for example.
The software switches to status display
depending on the selection of the programme
to be simulated. The [Save on the twall] and
[High scores] functions are not possible with
In contrast to the status display for
programmes which are executed on the
twall®, the stylised twall® is an interactive
element here. Instead of pressing the touch
pads on the twall®, in the simulations you
click with the mouse on the corresponding
graphic key fields.
E| 17
twall®Basic16 standard Color mobile foldable
User Manual Rev. 1.0.2
Creating new twall® programmes
Using the twall® programme editor software, new twall® programmes can be created. General
parameters are set on the first page of the programme editor.
18 |E
Under this option, the twall® type is set for which the programme is intended.
Enter a time-out here for the key fields. This is the maximum time which may elapse
between activating (connecting) a key field and deactivating (pressing) a key field. The
time-out is indicated in milliseconds between 1 and 65,000. Longer time-outs are not
permitted for reasons connected with overheating. For this reason, avoid stipulating two
identical targets with so high a time-out.
When a time-out is set and this field is activated, the programme aborts the execution as
soon as a time-out has expired. The normal procedure in this case is that the current target
is assessed as an error and the next key field is activated.
The input delay is the time between the deactivation of a key field and the activation of
the next key field. The standard setting is zero (no delay). Selected "fixed value" and enter a
number in the "Value" field in order to set a fixed delay of the time indicated. Select "random
value" and enter two values in the "smallest" and "largest" fields in order to stipulate a
random input delay for this area (the input delay is reselected for each new target).
Select this option to create a programme for two players. On the following page, you can
only indicated targets on the left half of the twall®. The programme will then run identically
for the two players.
If this option is selected, the following page on which the individual targets are selected
does not apply. Instead, clicking on [Proceed] will save the programme. When executing the
programme on the twall®, the positions of the targets are selected randomly.
Enter here the number of chance targets and their colour. A fixed colour can be selected or
it can also be left to chance in exactly the same way as the targets.
Back to start page.
Proceed to the next page of the programme editor.
twall®Basic16 standard Color mobile foldable
User Manual Rev. 1.0.2
The individual targets can be stipulated on the second page of the programme editor. The
programme editor operates in two different modes: Create and Edit. If no target is selected in
the list of defined targets, clicking on the key field of the graphic twall® adds a new target to
the list. The defined parameters/colours then refer to the next target to be added.
If an individual target is selected in the list, clicking on a key field of the graphic twall® changes
the position of the target selected. The change to the parameters also corresponds to the target
selected. If several targets in the list are selected, only the parameters of the targets selected can
be changed.
Clicking on the graphic key fields adds new targets to the programmeme.
This is where to set the sequential procedure for the selected/next target. The parameter
stipulates which event will cause the sequence to move on to the next target.
Using the three option fields you stipulate the colour for the selected/next target.
The individual colour channels are created by combining colours
(red + green + blue equals white).
List of defined targets. The index indicates the number of the target in the programme
sequence, X and Y stand for the horizontal or vertical position of the target. The flags
contain the colour and parameter for the sequence.
Use these keys to add targets to, delete targets from or rearrange the list, or to delete the
entire list.
Back to page 1 of the programme editor.
Use this key to simulate the edited programme. To do this it must first be saved on the hard
Transfers the programmeme to the twall® and executes it directly. It is not possible to save it
on the twall® in this mode.
Saves the programme on the hard disk..
E| 19
twall®Basic16 standard Color mobile foldable
User Manual Rev. 1.0.2
The following parameters are defined for the sequence:
wait until precisely this key was pressed: this is the standard​setting. The next target in the programme will only be activated when the
current target is deactivated or the time-out has expired.
Wait until any active key was pressed: the next target in the programme will only
be activated when an active (illuminated) key is deactivated or the time-out has expired.
Wait until any key was pressed: the next target in the programme will only be
activated when any key - active or not - was pressed or the time-out has expired.
Wait until the last active key was pressed: the next target in the programme will only be activated when the last active (illuminated) key has been deactivated or the time-out has expired. This mode is especially helpful when
numerous key fields on the twall® light up and all need to be deactivated before the programme is ended or the programme sequence continues.
Don't wait: the next target is activated immediately after the key field is switched
on. This mode is required to connect numerous key fields simultaneously.
The following functions are available to edit the targets in the list:
Adds a new element to the list by duplicating the currently selected or the last element in the list.
Deletes the selected elements from the list.
8.4.6 These keys move the selected element one position down
or up.
Deletes the entire list
Editing twall® programmes
To edit twall® programmes at a later date, click on [Edit existing programmes] on the start page.
Then select the programme to be edited from the options display. In other respects, editing a
programme is similar to creating new programmes.
8.4.7 Editing sound sets
Using sound sets, specific events of a twall® programme can be assigned sounds. Each twall®
programme can be assigned a sound set2.
In order to transfer the sounds to the twall®, the programme must first be transferred from the
computer to the twall® and then saved (see Chapter The sounds are then automatically transferred to the SD card on the twall® (the card must be inserted into the SD card slot).
20 |E
Only works with twall® models with sound support.
twall®Basic16 standard Color mobile foldable
User Manual Rev. 1.0.2
 Select here the twall® programme for
which the sound set is to be processed.
 This list contains all the events
which can occur in the twall® programme. The sounds assigned can
be seen in the "Sound" column.
 This key can be used to test
the sound selected.
 This key saves the settings made.
 If an event has been selected in the
events list, this event can be assigned
a sound using this options display.
8.5. Firmware update
The twall® software can be used to update the twall® firmware. One prerequisite for this is that
when installing the software, the drivers from Atmel needed for updating the firmware are also
installed. The setup programme for these tools starts automatically during the software installation. For a firmware update, the most up-to-date
twall® software should always be used!
The following steps are required for updating the firmware:
Connect the twall® to the PC using the USB cable.
Start the software with the command-line argument
"admin". The easiest way to do this is by using the
"Execute" function in the Windows start menu. The path
to the twall® software will have to be changed if you have
saved the software in another directory.
In the programme window of the twall® software, select the
[Settings] item. On the [Settings] page, there are now
two additional keys [Firmware Update] and
[Initialise twall] available.
Click on the [Firmware Update] key.
In the dialogue box which appears, select the new firmware
file. The file must always have the suffix .bin.
Click on [Update].
A dialogue box to enter the password appears first of all.
Enter here the password which is affixed
to the last page of these operating instructions.
During the update, two requests appear to restart
the twall®. This is easily done by simply switching off
and on again using the twall® switch.
After the update has concluded successfully, the twall®
software must be restarted. The update is now complete.
E| 21
twall®Basic16 standard Color mobile foldable
User Manual Rev. 1.0.2
NOTE: The current software and firmware updates for your twall® can be downloaded in the download
area of our website.
Go to
Enter the serial number of your twall® and click on "Download"
9 The eight-digit serial number of the twall® can be found on your
delivery note or on the stainless steel frame of the twall® (e.g. 227xxxxx).
You can now download the desired PC software, firmware or the drivers
Monday to Thursday from 07.00 - 15.30
Friday from 07.00 - 14.30:
• tel. +49 3727 6205-80 fax +49 3727 6205-220
• e-mail
The following information is needed from you to initiate a service call:
• Customer number, telephone, e-mail address
• Information regarding the twall®
-- Version: Premium64, Basic16 or Basic fold-away or Compact32
-- twall® serial number
-- Sound: J/N, language G/E/F, hardware revision, software version
• Information regarding the system (in the case of software problems):
-- Operating system, version of the PC software, messages in device manager
In cases of emergency outside normal opening hours:
Emergency number (twall® service mobile): +49 151 162 104 95
22 |E
twall®Basic16 standard Color mobile foldable
User Manual Rev. 1.0.2 |
Copyright © 2012 IMM Holding GmbH
The reproduction and distribution of this documentation and the exploitation of its contents
belonging to the product and the software are permitted without the written permission of the
IMM Holding GmbH.
All information in this document are carefully considered, because our products are constantly
being developed, there may be variations! The current version can be found at: / download.
IMM Holding GmbH
Leipziger Straße 32
09648 Mittweida
tel: fax:
+49 3727 6205-0
+49 3727 6205-220
E| 23