MODEL:
S1009CM
Version: 2.0
INSTALLATION GUIDE
sample copy
LED THERMAL WATERFALL BASIN FAUCET
SUMERAIN SANITARY GROUP
WWW.SUMERAIN.COM
THANK YOU
Dear Valued Customer,
SUMERAIN would like to take this opportunity to thank you for purchasing SUMERAIN products. It is our sincere
hope that you are completely satisfied with your new purchase. All SUMERAIN products are carefully engineered,
and factory tested to provide long trouble-free use under normal conditions. This product is easy to install using
basic tools and our easy to follow illustrated instructions. We welcome any questions or comments you may have
and look forward to assisting you in the future. If you have any questions regarding this product, call
+86-750-2731579 or email to us@sumerain.com .
Sincerely,
SUMERAIN customer service department
BEFORE PROCEEDING
1. Unpack your new product and ensure that all the parts are contained in the packaging. Keep the product in its
original box until you ready to install it.
2. Locate water supply inlets and shut off the water supply valves. These are usually found near the water meter.
if you are replacing an existing unit, remove the old unit and clean the mounting surface thoroughly.
3. Observe all plumbing and building codes in your area.
4. It is recommends calling professional if you are uncertain about installing this product.
TOOLS RECOMMENDED
Philips screwdriver
Allen wrench
Adjustable wrench
SUMERAIN SANITARY GROUP
Channel locks
WWW.SUMERAIN.COM
Thread Sealant
LIMITED LIFETIME CONSUMER WARRANTY
VERSION: 140320.15.3
This product has been manufactured and tested to the highest quality standards by SUMERAIN sanitary Inc("SUMERAIN").This
warranty is limited to SUMERAIN products which are purchased by a consumer in the China after Jan 1,2010 and installed in China
or the state which has SUMERAIN technical support department locally.(visit http://www.sumerain.com/en/supportcenter.asp for
review the state list of SUMERAIN technical support department).If the faucet should leak or drip during normal use,SUMERAIN will,
free of charge, mail to the purchaser the cartridge necessary to put the faucet in good working condition. If a defect is found in
normal residential use, SUMERAIN will, at its election, repair, provide a replacement part or product, or make appropriate
adjustment.
WHO IS COVERED BY THE WARRANTY
This warranty extends to the original consumer purchaser only (exclusive online retail original customer, online retail original
customer cover by the "Online CONSUMER Limited Lifetime WARRANTY & Return policy"), This warranty is not-transferable.
WHAT IS COVERED BY THE WARRANTY
This warranty covers only your SUMERAIN manufactured product. SUMERAIN warrants this product against defects in material or
workmanship as follows: SUMERAIN will repair at no charge for parts only or, at its option, replace any product or part of the product
that proves defective because of improper workmanship and/or material, under normal installation, use, service and maintenance. If
SUMERAIN unable to provide replacement, SUMERAIN may elect to provide similar model upon close value.
FINISH WARRANTY
It is the responsibility of the customer to check for any material finish defects before installation. SUMERAIN doesn't warranty these
finishes after the fixture has been installed.
ELECTRONIC FAUCETS WARRANTY
SUMERAIN warrants that its electronic faucets, valves and controls to be free from manufacturing defects in material and
workmanship under normal use for three(3) years from the date of purchase and waterflow impeller-dynamo (generate power for
LED faucet) for six(6) months from the date of purchase.
LENGTH OF WARRANTY
Replacement or repaired parts of products will be covered for the term of this warranty as stated in the following two sentences, if
you are a consumer who purchased the product for use primarily for personal,family,or household purposes, this warranty extends
for 5 years since the product originally installed (Extend max 1 month From the date of purchase).if you purchased the product for
use primarily for any other purpose,including,without limitation, a commercial purpose or is installed outside of China, or if the finish
is gold, non-Vibrant or a painted or powder coated color finish this warranty extends only for one year, with respect to SUMERAIN
and commercial products.
THIS WARRANTY DOES NOT COVER, AND SUMERAIN WILL NOT PAY FOR:
A. Conditions, malfunctions or damage not resulting from defects in material or workmanship.
B. Conditions, malfunctions or damage resulting from normal wear and tear, improper installation, improper maintenance,
misuse,abuse,negligence,accident or alteration or the use of abrasive or caustic cleaning agents or "no-rinse" cleaning products,
or the use of the product in any manner contrary to the product instructions. Conditions in the home such as excessive water
pressure or corrosion.
C. Labor or other expenses for the disconnection, deinstallation, or return of the product for warranty service, or for installation or
reinstallation of the product.
D. Accessories, connected materials and products (including but not limited in handshower flexible hose, spray flexible hose,
handshower), or related products not manufactured by SUMERAIN
TO OBTAIN WARRANTY PARTS OR INFORMATION
Contact your SUMERAIN retailer or contact technical service at: supports@sumerain.com
In requesting warranty service, you will need to provide
1. The sales receipt or other evidence of the date and the place of purchase.
2. A description of the problem (Download URL: http://www.sumerain.com/download/servicerequest/sheet.pdf and fill out the
Service Request Sheet).
3. Delivery of the product or the defective part, postage prepaid and carefully packed and insured to :
SUMERAIN FACTORY SUPPORT CENTER ,25 Building,Tangkou industrial park,Shuikou Town,Jiangmen Kaiping city,
Guangdong provice,China 529301
When warranty service is completed, any repaired or replacement product or part will be returned to you postage prepaid.
EXCLUSIONS AND LIMITATIONS
Repair or replacement (or, in limited circumstances, refund of the purchase price) as provided under this warranty is the exclusive
remedy of the purchaser. SUMERAIN neither assumes nor authorizes any person to create for it any obligation or liability in
connection with this product.SUMERAIN shall not be liable to purchaser or any person for any incidental, special, or consequential
damages, arising out of breach of this warranty or any implied warranty (including merchantability) Some states do not allow the
exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This
warranty gives you specific legal right, and you may have other rights which vary from state to state. You may be required by law to
give us a reasonable opportunity to correct or cure any failure to comply before you can bring any action in court against us under
the Magnusson-moss warranty Act.
PRODUCT INSTRUCTIONS AND QUESTIONS
Upon purchase or prior to installation, please carefully inspect your SUMERAIN product for any damage or visible defect. Prior to
installing, always carefully study the enclosed instructions on the proper installation and the care and maintenance of the product. if
you have questions at any time about the use,installation,or performance of your SUMERAIN product, or this warranty, please call
or email us at +86-750-2731579, supports@sumerain.com
SUMERAIN SANITARY GROUP
WWW.SUMERAIN.COM
FUNCTIONS AND SPECIFICATION
Function
Bathroom Sink Faucets
Feature
LED, Waterfall
Style
Contemporary
Finish
Chrome
Installation Holes
One Hole
Number of Handles
Single Lever
Faucet Total Height
175 mm
[ 6-7/8 Inch]
Spout Reach
115 mm
[ 4-1/2 Inch]
Spout Width
90 mm
[ 3-9/16 Inch]
Spout Height
120 mm
[ 4-3/4 Inch]
Max deck thickness
45 mm
[ 1-3/4 Inch]
Flow rate
6.8L/M
[ 1.8 GPM]
Valve Type
Ceramic Valve
Faucet Body Material
Brass
Faucet Spout Material
Glass
Net Weight
0.98KG [ 2.16lbs ]
Gross Weight
1.55KG [ 3.41lbs ]
Working water press
0.2 ~0.8 Mpa
LED power supply
Battery
LED Color changing
Water temperature
< 28 ℃
Blue color
Water temperature
28 ℃~ 38 ℃
Green color
Water temperature
> 38 ℃
Red color
Packing box size
330mm[13.0”]x 165mm[6-1/2”] x 137mm[5-3/8”]
SUMERAIN SANITARY GROUP
WWW.SUMERAIN.COM
DIMENSION
sample copy
SIDE VIEW OF FAUCET
sample copy
TOP VIEW OF SPOUT
SUMERAIN SANITARY GROUP
WWW.SUMERAIN.COM
INSTALLATION STEPS
1. BEFORE PROCEEDING
WARNING: Read all the instructions completely before proceeding.SUMERAIN recommends calling a professional
if you are uncertain about installing this product!, this product should be installed in accordance with all
local and state plumbing and building codes.
2. SHUT OFF WATER SUPPLY
Locate water supply inlets and shut off the water supply valves. These are usually found near the water meter. if you are
replacing an existing unit, remove the old unit and clean the mounting surface thoroughly.
3. CHECKING THE CONTENTS OF THE BOX
Upon opening the box, check to ensure that all the following items are included.
sample copy
CODE
ITEM NAME
A
Faucet Body
C
QTY
CODE
ITEM NAME
QTY
1PCS
B
O-Ring
1PCS
AA battery holder
1PCS
D
shank
2PCS
E
Rubber washer
1PCS
F
metal shim
1PCS
G
Nut
1PCS
H
Flexible hose
2PCS
I
Fasten sheet metal
2PCS
J
Screw
2PCS
If any of these items are missing, please contact SUMERAIN consumer service at +86-750-2731579 or email to:
supports@sumerain.com
SUMERAIN SANITARY GROUP
WWW.SUMERAIN.COM
4. INSTALLATION HOLES INSPECTION
Verify that the hole sizes and positions in the wall are correct,the diameter of mounting hole should be 35mm(1-3/8”) at least and
maximum 40mm(1-9/16”) ,the max thickness of deck should be 30mm(1-3/16”)
Φ
Φ
SUMERAIN SANITARY GROUP
WWW.SUMERAIN.COM
5. INSTALLATION
5.1 Turn on your shut-off valve for cleaning the hot and cold water supply pipe before connect to the faucet, allow the water flush
3~5 minutes to flush out dirt and debris. Shut off the water supply again after finish.
5.2 Screw in the shanks “D” onto the faucet body base’s screw hole, then position the faucet with shank ”D” and O-ring “B” on the
mounting surface
5.3 Screw in hoses “h” onto the faucet body base’s water inlet hole as below and attach the O-Ring “B” to the “O-ring” groove
SUMERAIN SANITARY GROUP
WWW.SUMERAIN.COM
5.4 Place the semi-circular rubber washer “E”, semi-circular metal washer “F” and shank lock nut “G” onto the shank “D” from
underneath and tighten lock nut “G” with wrench (not provided).
SUMERAIN SANITARY GROUP
WWW.SUMERAIN.COM
5.5 Place 4 PCS AA 5# battery into the battery holder (please don’t make mistake on the Plus-n-Minus or else it will damage
electronic components).
SUMERAIN SANITARY GROUP
WWW.SUMERAIN.COM
5.6 Fasten the battery cover by screw.
5.7 Position the battery holder onto wall by the screws and anchor.
SUMERAIN SANITARY GROUP
WWW.SUMERAIN.COM
5.8 Connect battery holder to the plug receptacle which comes from faucet body.
5.9 Attach the hot and cold water hose to shut off valve.
SUMERAIN SANITARY GROUP
WWW.SUMERAIN.COM
6. INSPECTION
6.1 Turn on hold and cold water supply and check all connection for ensuring no leaking anywhere.
INSTALL FINISH
SUMERAIN SANITARY GROUP
WWW.SUMERAIN.COM
CLEARNING RECOMMENDATION FOR SUMERAIN PRODUCTS
Modern lavatory faucets, kitchen faucets, and showers consist of very different materials to comply with the needs of the market
with regard to design and functionality. To avoid damage and returns, it is necessary to consider certain criteria when cleaning.
Cleaning Materials for faucets and showers
Acids are a necessary ingredient of cleaning materials for removing lime, however please pay attention to the following points when
cleaning faucets and showers:
■ Only use cleaning materials which are explicitly intended for this type of application.
■ Never use cleaning materials which contain hydrochloric, formic, phosphoric, or acetic acid, as they cause considerable
damage.
■ Never mix one cleaning material with another.
■ Never use cleaning materials or appliances with an abrasive effect, such as unsuitable cleaning powders, sponge pads, or micro
fiber cloths.
Cleaning instructions for faucets and showers
Please follow the cleaning material manufacturer's instructions. In addition, pay attention to the following points:
■ Clean the faucets and showers as and when required.
■ Use the amount of cleaning product and the amount of time recommended by the manufacturer. Do not leave the cleaner on the
fixture longer than necessary.
■ Regular cleaning can prevent calcification, if scale deposits are noticed on the faucet surface or the spout, you can clean it by a
commercial limescale remover, such as Lime-Away® or CLR®.Dilute the remover according to the label instructions.
■ The faucets might have some rusty if your faucet under hard water condition, please rub it with aluminum foil dipped in water
until the surface is nice and smooth, and wipe it use a small amount of chrome polish or maybe something like car wax(such as
Meguiar®,Turtle Wax®) or polish.
■ For stainless steel faucet and spout both made of solid stainless, normally this finish has not protective coating on it(in particular
waterfall spout inside),stainless steel is by its material nature very tarnish resistant, but by no means tarnish or stain proof. This
finish might oxidize naturally over time and react to its environment. Keep your stainless fixture wiped clean and dry and use
only a cleaner specifically made for stainless steel (such as Weiman®, CLR®).
■ When using spray cleaners, spray first onto a soft cloth or sponge, never spray directly onto the faucet as droplets can enter
openings and gaps and cause damage.
■ After cleaning, rinse thoroughly with clean water to remove any cleaner residue.
Important
Residues of liquid soaps, shampoos, and shower foams can also cause damage, so rinse with clean water after using.
Please note: if the surface is already damaged, the effect of cleaning materials will cause further damage.
Components with damaged surfaces must be replaced or injury could result.
Damage caused by improper treatment is not covered under the warranty.
SUMERAIN SANITARY GROUP
WWW.SUMERAIN.COM
TROUBLESHOOTING
Symptom
Solution
A.
B.
A.
B.
The water pressure is too low
C.
A.
The spout sprays water all over
B.
A.
Water is leaking from the faucet under the sink B.
Faucet leaks from the handle
Tighten the packing nut
Replace the "O" ring or packing
Make sure the water supply valves under the sink are turned on all the way
Clean or replace the aerator
Check plumbing system for water pressure problems
Clean or replace the aerator
Replace the aerator washer
Check the water supply connections to the faucet
Inspect the water supply lines or hoses for leaks
LED does not illuminate
A. Remove the cap and tighten the screw
B. Locate and tighten the hex set screw
C. Remove the handle and check for stripped teeth on the stem.
A. Replace battery
LED light on always
A. touches the water with your finger for flowing out the residual water to cut off
Handle is loose
the power.
HONGKONG SUMERAIN SANITARY INDUSTRY CO., LIMITED
Address: ROOM 1018, HOLLYWOOD PLAZA 610 NATHAN ROAD MONGKOK, KL
Factory Address: 25 building Tangkou Industrial Park,Shuikou town, Kaiping City, Guangdong Province, China (Mainland)
Tel:
+86-750-2731579
Toll Free: 400-0999-075 (China mainland)
Fax: +86-750-2715258
Web: http://www.sumerain.com
E-mail: hk@sumerain.com
SUMERAIN INTERNATIONAL GROUP – AMERICA SALES Branch
Address: 13455 Harper Dr.
Saratoga, CA 95070
USA
Tel: +1-408-867-8884
FAX: +1-408-867-4272
E-mail: us@sumerain.com
SUMERAIN SANITARY GROUP
WWW.SUMERAIN.COM