User Manual 17” / 19” High Brightness LCD 1000 - I

Dedicated KVM switch and rackmount screen technology
User Manual
17” / 19” High Brightness LCD 1000 cd/m2
HNP717/HNP819
Rackmount Display Panel
Options :
-SDI / MCS
-AV / HDMI / Audio
- Touchscreen / DC power
- MIL-type or lockable connector
F© C€ k/
REACH
i-Tech Company LLC
TOLL FREE: (888) 483-2418 • EMAIL: info@iTechLCD.com • WEB: www.iTechLCD.com
Legal Information
First English printing, October 2002
Information in this document has been carefully checked for accuracy; however, no guarantee is given to the correctness
of the contents. The information in this document is subject to change without notice. We are not liable for any injury or
loss that results from the use of this equipment.
Safety Instructions
Please read all of these instructions carefully before you use the device. Save this manual for
future reference.
■
■
■
■
■
■
■
■
■
■
■
Unplug equipment before cleaning. Don't use liquid or spray detergent; use a moist cloth.
Keep equipment away from excessive humidity and heat. Preferably, keep it in an air-conditioned environment with
temperatures not exceeding 40° Celsius (104° Fahrenheit).
When installing, place the equipment on a sturdy, level surface to prevent it from accidentally falling and causing
damage to other equipment or injury to persons nearby.
When the equipment is in an open position, do not cover, block or in any way obstruct the gap between it and the
power supply. Proper air convection is necessary to keep it from overheating.
Arrange the equipment's power cord in such a way that others won't trip or fall over it.
If you are using a power cord that didn't ship with the equipment, ensure that it is rated for the voltage and current
labeled on the equipment's electrical ratings label. The voltage rating on the cord should be higher than the one listed
on the equipment's ratings label.
Observe all precautions and warnings attached to the equipment.
If you don't intend on using the equipment for a long time, disconnect it from the power outlet to prevent being
damaged by transient over-voltage.
Keep all liquids away from the equipment to minimize the risk of accidental spillage. Liquid spilled on to the power
supply or on other hardware may cause damage, fire or electrical shock.
Only qualified service personnel should open the chassis. Opening it yourself could damage the equipment and
invalidate its warranty.
If any part of the equipment becomes damaged or stops functioning, have it checked by qualified service personnel.
What the warranty does not cover
■ Any product, on which the serial number has been defaced, modified or removed.
■ Damage, deterioration or malfunction resulting from:
D Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product modification, or
failure to follow instructions supplied with the product.
□ Repair or attempted repair by anyone not authorized by us.
□ Any damage of the product due to shipment.
□ Removal or installation of the product.
□ Causes external to the product, such as electric power fluctuation or failure.
□ Use of supplies or parts not meeting our specifications.
□ Normal wear and tear.
□ Any other causes which does not relate to a product defect.
■ Removal, installation, and set-up service charges.
Regulatory Notices Federal Communications Commission (FCC)
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of
the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation.
Any changes or modifications made to this equipment may void the user's authority to operate this equipment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following measures:
■ Re-position or relocate the receiving antenna.
■ Increase the separation between the equipment and receiver.
■ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Contents
>
HNP717/HNP819
Package Content
Structure Diagram & Dimension
Installation
P.1
P.1
P.4
> Specifications / OSD / Remote Controller
Product Specifications
On-screen Display Operation ( OSD )
P.5
P.7
> Options
3G/HD/SD-SDI Broadcast-grade input
MCS Multi-display control solution
AV2.2D Upgrade : DVI-D + VGA + BNC + S-Video + Audio
AV2.2H Upgrade : HDMI + VGA + BNC + S-Video + Audio
AV3.0 Upgrade :
DVI-D + VGA + HDMI + BNC + S-Video + Audio
H17" / H19" Touchscreen : Resistive, Capacitive
48V, 24V or 12VDC power
MIL-type or lockable connector
P.9
P. 10
P. 11
P.11
P. 12
P.13
P. 14
P.15
Before Installation
■
It is very important to mount the equipment in a suitable cabinet or on a stable surface.
■
Make sure the place has a good ventilation, is out of direct sunlight, away from sources of excessive
dust, dirt, heat, water, moisture and vibration.
Unpacking
The equipment comes with the standard parts shown in package content. Check and make sure they are
included and in good condition. If anything is missing, or damaged, contact the supplier immediately.
How To Clean Your LCD Monitor
4 k Caution :
■
To avoid the risk of electric shock, make sure your hands are dry before unplugging your monitor from or
plugging your monitor into an electrical outlet.
■
When you clean your monitor, do not press down on the LCD screen. Pressing down on the screen can
scratch or damage your display. Pressure damage is not covered under warranty.
■
Use only cleansers made specifically for cleaning monitors and monitor screens. Cleansers not made to
clean monitors and monitor screens can scratch the LCD display or strip off the finish.
■
Do not spray any kind of liquid directly onto the screen or case of your monitor. Spraying liquids directly
onto the screen or case can cause damage which is not covered under warranty.
■
Do not use paper towels or abrasive pads to clean your monitor. Using an abrasive pad or any wood based
paper product such as paper towels can scratch your LCD screen.
Cleaning Your Monitor
To clean your LCD safely, please follow these steps :
®
Disconnect the power cord.
®
Gently wipe the surface using a clean, dry microfiber cloth. Use as little pressure as possible.
Cleaning Tough Marks and Smudges
To remove tough marks and smudges, please follow these steps :
©
Disconnect the power cord.
©
Spray a small amount of non-abrasive cleanser on a microfiber cloth.
^^
• *
Caution : Do not spray or apply any liquids directly onto the monitor. Always apply the solution to your
microfiber cloth first, not directly on the parts you are cleaning.
®
Gently wipe the surface. Use as little pressure as possible.
®
Wait until your monitor is completely dry before plugging it in and powering it up.
< Part 1 >
< 1.1 > Package Content
HNP717/HNP819X1
6ft VGA cable X1
Power adapter X 1
Power cord X 1
< 1.2 > Structure Diagram
Front view
o
a
o
o
A
V
HNP717
■
HNP819
<
A
%9
6
o
||
II
&S
e
o
A
w
u
II o
II
Rear view
0
LCD panel
@
LCD membrane
|H
Power adapter
( D Audio speaker
( 5 ) Power adapter basket
Power cord
DVI-D
Audio
0 O O O
Power BNC S-Video
© © ©
VGA
c|5x?|o
out - in - in
Video PC
Basic I/O
DVI-D + VGA
AV2.2D upgrade
DVI-D + VGA + BNC + S-Video + audio
AV2.2H upgrade
HDMI + VGA + BNC + S-Video + audio
AV3.0 upgrade
HDMI + DVI-D + VGA + BNC + S-Video + audio
Options
USB for touchscreen & DC power
SDI (AV3.0 upgrade required )
P.1
HDMI
< 1.2 > Dimension - HNP717
Side View
Front View
o
o
HNP717
g
OJ
II
A
V
in o
CO
OJ
<
>
CO
A
o
340
II
II
II
II
°
463
480
-^
^-
UNIT: mm
1mm = 0.03937 inch
Bottom View
480
O
Q ® Oooo J
fe
440
Model
Product Dimension
(W x D x H)
Packing Dimension
(W x D x H)
Net
Weight
Gross
Weight
HNP717
4 8 0 x 5 4 . 2 x 3 1 0 mm
1 8 . 9 x 2 . 1 x 1 2 . 2 inch
529 x 1 2 4 x 4 9 5 mm
2 0 . 8 x 4 . 9 x 1 9 . 5 inch
6 kg
13 lbs
8.5 kg
19 lbs
P.2
< 1.2 > Dimension - HNP819
Side View
Front View
o
c
©
HNP819
•
o
CO
00
©
©
o>
©
in
CO
CO
ON
co
e
OJ
379
!!c
° II
463
5
480
UNIT: mm
1mm = 0.03937 inch
Bottom View
480
C 2 ^ O © ° ®o®
J
CO
CO
fe
in
440,6
Model
Product Dimension
(W x D x H)
Packing Dimension
(W x D x H)
Net
Weight
Gross
Weight
HNP819
480x53.3x354.8 mm
18.9x2.1 x 14 inch
539 x 1 2 9 x 5 2 9 mm
2 1 . 2 x 5 . 1 x 2 0 . 8 inch
6.5 kg
14 lbs
9 kg
20 lbs
P. 3
< 1.3 > Installation
Step O
■ Mount the display panel with M6 screw set.
■ M6 screw x 4 pcs required ( Left & right side ).
M6 screw sets are not provided.
Step O
Fix the LCD into the rack.
P.4
< Part 2 >
< 2.1 > Product Specifications
HNP717
HNP819
17-inch TFT color LCD
19-inch TFT color LCD
1280x1024
1280x1024
1000
1000
Contrast Ratio (typ. )
1000:1
1000:1
Color
16.7 M
16.7 M
85/85/80/80
80/80/80/80
5
5
0.264
0.294
337.92H x 270.33V
376.32Hx301.05V
Surface treatment
Anti-glare
Haze 25%, Hard-coating
Surface hardness
3H
3H
LED
LED
50,000
50,000
Panel Size ( diagonal)
Display pixel ( dots x lines )
Brightness (typ. )
Viewing Angle (L/R/U/D)
Response Time ( ms )
Dot pitch ( mm )
Display Area ( mm )
Backlight Type
MTBF ( hrs )
Video
Connectivity
Digital
DVI
HDMI 1.1.CEA-861-D
DVI-D, TMDS single link
VGA
Analog 0.7Vp-p
Composite ( BNC )
NTSC & PAL
S-Video (4-pin )
NTSC & PAL
Plug & Play
DVI / VGA
VESA EDID structure 1.3
Synchronization
VGA
Separate, Composite & SOG
Audio Input
Connector
3.5mm stereo jack
Impedance / Power level
30kO / 750mV
Connector
3.5mm stereo jack
Resistance / Power level
30kQ / 2.8V
Power
2x2W
Analog
Audio
Connectivity
Audio Output
Speaker Output
HDMI
"When the audio output is connected, speaker output is OFF
Regulatory
Power Supply
Range
Auto-sensing 100 to 240VAC,
50 / 60Hz
Power Consumption
Screen display ON
35W or less
Power saving mode
4W or less
Power button OFF
1Wor less
Safety
FCC & CE certified
Environmental
RoHS2 & REACH compliant
R5
Operating
Storage
Temperature
0 to 50°C degree
Humidity
20-90%, non-condensing
Temperature
-5to60°Cdegree
Humidity
5-90%, non-condensing
Shock
10G acceleration (11ms duration)
Vibration
5-500Hz 1G RMS random
HNP717
Product ( W x D x H )
Packing ( W x D x H )
Net Weight
Gross Weight
DVI-D/VGA Input
HNP819
480x54.2x310 mm
480 x 53.3 x 354.8 mm
18.9x2.1 x 12.2 inch
18.9x2.1 x 14 inch
529 x 124 x495 mm
539 x 129x529 mm
20.8 x 4.9 x 19.5 inch
21.2x5.1 x 20.8 inch
6kgs/13lbs
6.5kgs/14lbs
8.5kgs/19lbs
9 kgs / 20 lbs
PC Signal
1280 x 1024 x 60 / 75Hz
1280 x960 x60Hz
1280x760x60/75Hz
1152 x864 x75Hz
1024x768x60/70/75Hz
848 x 480 x 60Hz
800 x 600 x 60 / 72 / 75Hz
720 x 400 x 70Hz
640 x 480 x 60 / 72 / 75Hz
640 x 400 x 70Hz
640 x 350 x 70Hz
P.6
< 2.2 > On-screen Display Operation ( OSD )
HNP819
O Power light
• Green = On
• Orange = Power saving
•©<►♦*♦
Function
Membrane Switch
e
Power on / off LCD
Display the OSD menu
«>«»#€>
Scrolls through menu options and adjusts the displayed control
(To auto adjustment by pressing the button <§> for 5 seconds)
Exit the OSD screen
Toggle analog, digital & video connection (DVI-D and video options only)
if*
HNP717
i= t>
Membrane Switch
Function
6
Turn the monitor on or off
DCZI
Dl=l
DCZI
Display the OSD menu
Act as an Enter key to select screen setting options
A V <
^
>
Scroll through menu options and adjust
the displayed control
Exit the OSD screen
Go back to the previous on-screen sub-menu or
main menu
Remark : All LED touch buttons in WHITE light.
The LED of Power (§) touch button will flash continuously when there is no signal input.
(T) All the LED touch buttons will automatically turn off after 10 minutes of idle status ( except the Power © ).
©
Light up all membrane buttons, please press any button for 1 - 2 seconds ( except the Power @ ).
P. 7
< 2.2 > On-screen Display Operation ( OSD )
Ver: G56SN20SSTD701
1024x768 59.8Hz
Image
Brightness
[1
]
50
Contrast
J
]
50
Color Temp
User
Red
Mi
OSD Configuration Page
m
Adjust:
I ^ ^ M
Green
[I
Q 255
Blue
J
Q 255
Select: ♦ +
Set: ®/i=i
Image:
for the brightness, contrast, color temp, red, green, and blue
Geometry:
for the auto adjust, H position, V position, phase and clock
toJ>
Misc
Video:
for the colour, tint, sharpness, noise reduction, DCDi and TV Setup
Audio:
for volume, bass, treble, balance, AVL and mute
Misc:
for the language, OSD position, graphic mode, ratio, reset and timer
P.8
0 255
Exit: t
< Part 3 >
< 3.1 > Options : 3G / HD / SD-SDI input
iTechLCDs' SDI input is an ideal solution for the broadcastgrade video and high resolution CCTV market.
Designed for use with NetView Full HD 1080p and ultra high
resolution 1920 x 1200 LCD displays, iTechLCD
provides a
SDI input module without using additional space or power and it
comes standard with a 2-year warranty.
SDI
DVI-D
|°l HfflJoj
Audio
i
1
o o o
out - in - in
Video PC
Power
BNC S-Video
0 © ©
VGA
cp^Jp
HDMI
© ©
out
-
P=^fl
in
For SDI option, the AD board will be upgraded to AV3.0, and this comes standard with HDMI, DVI-D,
VGA, S-Video, BNC and audio inputs.
Standard Compliance
Compatible Video Format
Compatible Audio Format
Max. Transmission Distance
75 ohm coaxial cable
3G-SDI IN
B N C x I /0.8Vp-p(75ohm)
3G-SDI OUT
BNC x 1 /Active through, equalized & relocked
Video
SMPTE 425M / 274M / 296M / 125M
ITU-R BT.656
Audio
SMPTE 299M / 272M-C
3G-SDI
1080p
1080p
1080i
720p
@60/50Hz, 4:2:2
@30 / 25/24Hz, 4:4:4
@60 / 50Hz, 4:4:4
@60/50Hz, 4:4:4
HD-SDI
1080p
1080i
720p
@30 / 25/24Hz, 4:2:2
@60/50Hz, 4:2:2
@60/50Hz, 4:2:2
SD-SDI
480i
@60Hz, 4:2:2
ITU-R BT.656
576i
@50Hz, 4:2:2
3G-SDI
48kHz, 16 / 20 / 24 bit, 2 CH, Synchronized Video
HD-SDI
48kHz, 16 / 20 / 24 bit, 2 CH, Synchronized Video
SD-SDI
48kHz, 16 / 20 / 24 bit, 2 CH, Synchronized /
Asynchronized Video
3G-SDI
150mat2.97Gb/s
HD-SDI
250mat1.485Gb/s
SD-SDI
480mat270Mb/s
P.9
< 3.2 > Options : MCS
( Multi-display Control)
More control is always good. Especially when it is necessary and
easy.
iTechLCD
various
provides MCS solution to control the OSD of
NetView LCD display up to 64 units.
The RS-232C is used for the communication between the PC and the
first display via a 15 feet serial cable while the CAN bus is used for the
various LCD displays cascade together via CAT 5/6 cable, and daisy
chain up to 1,000 meters.
Designed for use with
NetView
LCD displays,
iTechLCD
provides a MCS input module without using additional space or power
and it comes standard with a 2-year warranty.
HDMI
Audio
1
p 0 W e r BNC S-Video
O O O 0
out
- in - in
nil it _ i n _ i n
Video PC
MCS
^-"^
\
1
VGA
DVI-D
set out
in
Link
Please download the protocol of MCS control
For MCS option, casing depth will be changed.
B
RS-232C
Set switch
For the 1st and last display,
push the set switch upward
For other daisy chain displays,
push the set switch downward.
15 feet serial cable
( over 15 feet, extender required )
LINK
OUT
IN
I
t
Cat5 / 6 cable
max. 300 meters
OUT
!
in
m
OUT
IN
OUT
IN
I
I
t
Cat5 / 6 cable
max. 300 meters
RJ-45 jack
Cat5 / 6 cable
max. 300 meters
t
Daisy chain up to 1,000
meters and 64 displays
P.10
up to 64 displays
< 3.3 > AV2.2D Upgrade Options :
-DVI-D
(DVI-DTMDS single link)
- AV
( S-Video + Composite, BNC )
- Audio ( 3.5mm audio jacks for audio in & out, and 2W + 2W speakers )
DVI-D
,
Aud
'°
,
l°n~s]°] O O O
out - in - in
Video PC
Power
BNC S-Video
VGA
C% (8) fft
c & b
^
>
^=^ ^ ^
j
< 3.4 > AV2.2H Upgrade Options :
- HDMI
( HDMI 1.1, CEA-861-D )
- AV
( S-Video + Composite, BNC )
- Audio ( 3.5mm audio jacks for audio in & out, and 2W + 2W speakers )
,
Aud
'°
,
0 0 0
out
- in - in
in
nut - i n Video PC
Power
BNC S-Video
© ^^
0 ^^
©
' ^
^ ^
^=^
VGA
HDMI
ejSb
i'"
"fc
11
^e^
P.11
A
s]l
I'[i-——wj
< 3.5 > AV3.0 Upgrade Options :
- HDMI
( HDMI 1.1, CEA-861-D )
-DVI-D
( DVI-D TMDS single link)
- AV
( S-Video + Composite, BNC )
- Audio ( 3.5mm audio jacks for audio in & out, and 2W + 2W speakers )
DVI-D
,
,
[°rjm°l out
O -O
O
in - in
Power
BNC S-Video
fS
©
^
^=^
fl£|
^ ^
Video PC
P.12
VGA
\,
J*^h
j-
HDMI
< 3.6 > Options : Touchscreen & driver
0^
H17" / H19" USB Touchscreen Specification
17'
Model
19"
TRB
17"
e-Resistive
19"
TCB
e-Capacitive
Technology
5-Wire Resistive
Capacitive
Touch Point
Single
Single
Stylus or Finger
Finger
<50g/Stylus=R0.8
<50g
35 million touches
300 million touches
15 ms
20 ms
80% ± 3%
93% ±2%
3H
9H
8% ± 3%
7%
Method
Activation Force
Durability
Response Time
Optical Transmittance
Surface Hardness
Haze
Glass
1.4 ±0.2 mm
Connector
Compatibility
3.2 ±0.2 mm
2.8 mm ±10%
2.8 mm ±10%
USB Type A
USB Type A
Windows 7 / XP / Vista, Linux
Windows 7 / XP / Vista, Linux
USB touchscreen package includes 1 x 6ft USB cable, quick reference guideline and CD disc
For detailed information, please refer to the attached CD disc
As the touchscreen unit is not made of toughened glass, please handle it carefully
USB Touchscreen
DVI-D
Irxxxil
[°l H H ) ° ]
VGA
Power
0
Please follow the below steps to setup the touch screen
Step 1. Run the bundled CD disc or download the driver
Step 2. Double click the Setup.exe
Step 3. Follow the installation instruction to finish the setup
Step 4. After installation, run the TouchKit program & the "4 point calibration"
E
T^u^KKit
Please do the initial calibration
after the first setup
P.13
< 3.7 > Options : DC Power
Model
+opiTelo
48V
24V
Input rating
24-Volt
48-Volt
18-36V
36 - 75V
- No load
50 mA
50 mA
- Full load
4880 mA
2442 mA
Output voltage:
12-Volt
12-Volt
Output current:
8.3A
8.3A
Efficiency
85%
86%
Input voltage:
Input range:
Input current
Output rating
P.14
< 3.8 > Options : MIL-type or Lockable Connector
Input
MIL -type
Connector
Part no.
DC Power ***
( Male )
MS3470W8-33P
VGA ***
( Male )
MS3470W14-15P
MIL Standard
f f l t f )
MIL-DTL-26482
^^tf)
MIL - D T L - 26482
There are several additional MIL DC and VGA connector types with varying design
characteristics to meet cost considerations and to provide users with the most
design flexibility possible. For more information, please contact us.
Input
Lockable
Connector
Part no.
DC Power
( Male )
YM-Ext-461CP001
USB
LUSB-A111 -00
^0
Standard
D-type 3W3
MIL - type or Lockable connectors above can be integrated with our LCD displays.
Sale service just for connectors not provided.
P.15
I-TECH
COMPANV
i-Tech C o m p a n y LLC
TOLL FREE: (888) 483-2418 • EMAIL: info@iTechLCD.com
WEB: w w w . i T e c h L C D . c o m
Download PDF
Similar pages