Laser Range Finder
User’s Manual
Model # XRT
INCLUDED ITEMS
1) Laser Range Finder Unit
2) Carrying Case
3) Lanyard
4) Lens Cloth
5) Product Information Guide
Laser Range Finder
User’s Manual
page 2
Model # XRT
GETTING STARTED
1
Slide open battery compartment
cover on back of unit and install
battery.
2
Turn unit over to lanyard thru the small
loop and pull taught. the lanyard thru the
hole. Push “long” end of the bottom side and
insert one end of Install lanyard strap.
page 3
3
Locate and press the start button briefly
to turn the unit on.
The LCD will show one of 4 images, depending on what setting was on when last
powered off.
Y
M
Displays shown are in NormalDistance Mode
page 4
SWITCHING BETWEEN
MODES
4
Focusing the Unit. Locate the adjustable
eye piece, turn left or right until images
are in focus.
Pressing the “Mode” button will toggle
between the following modes:
1. Normal Distance in Yards
2. Normal Distance in Meters
Mode Button
page 5
1
Normal Distance in Yards - When in
this mode, the Line of Sight distance
in yards is the only information displayed
on the screen.
Normal Distance in
Yards mode gives
an accurate normal
distance to target.
Line of Sight Distance is 200 Yards
page 6
2
Normal Distance in Meters - When in
this mode, the Line of Sight in meters
is displayed on the screen.
Normal Distance in
Meters mode gives
an accurate normal
distance to target.
Line of Sight Distance is 274 Meters
RANGING
Press the Start button one time and release to start ranging. While measuring
the distance to target being ranged, the
transmitting symbol will blink. When the
unit is done measuring, the data will be
displayed on the screen.
Note: If target is out of range or a measurement was not obtained the unit will
display “- - - -” on the screen.
LCD display shown
with Distance in Yards
Mode on.
page 7
SCAN MODE
To use in “Scan Mode” press and hold
the “Start” button and, “Scan” will then
appear on the screen. As you change
targets the measurements on the
screen will change. Release the start
button to leave Scan mode. Scan mode
can be used in any ranging mode.
page 8
LOW BATTERY
If low battery indicator icon appears
on the screen, the battery has a low
charge and should be changed as this
could cause a ranging error.
POWER SAVER
MODE
Unit will automatically power off after
20 seconds of button inactivity.
CLEANING
To clean the lenses use the cleaning
cloth provided with the laser range
finder. Use a circular motion when
cleaning the lenses with the cleaning
cloth.
If you use anything other than the
cleaning cloth, make sure that is soft
and not coarse, as this may scratch the
lenses.
You may also use isopropyl alcohol to
clean the lens, but always apply it to a
soft cloth first and never directly on the
lens itself.
page 9
SPECIFICATIONS
Max Range:
Scan mode:
Power:
Eye lens:
Object lens:
View angle:
Precision:
Water Resistant:
Weight:
Size:
Battery:
LCD:
Power Saver:
Warranty:
page 10
up to 500 yards
Yes
6x
15.5mm – anti-fog
24mm
7 degrees
+/- 1 yard
yes
8 oz.
4.2” x 3” x 1.7”
CR2 (Not Included)
Gray color text/icons
20 seconds without pressing a button
1 year
WARRANTY
DISCLAIMERS
WGI Innovations, LTD is not responsible for damage, expense or injury caused by the unauthorized use of, alterations to, improper connection of and abuse or neglect of the WGI
Innovations™ products.
WARRANTY
You must register your product warranty online at www.wildgameinnovations.com. Follow the
on screen directions to complete the process.
WGI Innovations, LTD will replace any product that may encounter material or workmanship
defects free of charge for ONE (1) YEAR after the date of purchase and thereafter the cost
will vary per incident.
This warranty DOES NOT COVER damage, expense or injury caused by unauthorized repairs,
alterations, improper connection, shipping, abuse, theft, accident, neglect or collateral loss.
When returning product for service you MUST obtain a Return Merchandise Authorization
(RMA) number from WGI Innovations, LTD. Please include name, UPS address (no P.O. Box),
telephone number, RMA number and a complete description of the problem on all enclosed
correspondence.
page 11
When possible, pack product carefully in original carton. Customers are responsible for any
shipping cost to WGI Innovations™. WGI Innovations™ will pay shipping cost of replacement
product to the customer. We are not responsible for damage incurred in returning items for
repair.
CUSTOMER SERVICE
WGI Innovations, LTD stands behind every product we manufacture for a one year product
workmanship warranty and a strong commitment to customer service. If you are in need of
customer service for missing parts or need assistance with the operation or assembly of your
product, we encourage you to call one of our customer service representatives and let us
assist you with your WGI Innovations™ product.
DISCLAIMER
WGI Innovations, LTD reserves the right to make changes to product features, functionality
and physical design at its sole discretion. As a result, such changes may not be reflected in
this version of the manual.
page 12
REGULATORY DISCLOSURES
Caution – use of controls or adjustments or performance of procedures other than
those specified herein may result in hazardous radiation exposure.
Class 1 Laser Product
60825-1 2007
page 13
MMDDYY
XR T
SOFTWARE VER.
XRT
MMDDYY
SOFTWARE VER.
page 14
page 15
602 Fountain Parkway
Grand Prairie, TX 75050
800.847.8269
“Wildgame Innovations” and the “Button Logo” are TM trademarks of Wildgame Innovations, LLC.
“Sport Responsible” and “Halo” are TM trademarks of WGI Innovations, LTD.