User Manual
Contents
Main menu Functions
14
Rearview Mirror Function
18
DVD Setting
19
Theme Setting
20
Calender setting
20
Sound setting
21
Steering wheel control Setting
22
System setting
23
Radio setting
24
Touch Screen Calibration
25
Startup &
Startup &
Startup &
Startup &
Startup &
Startup &
Startup &
Shutdown
Shutdown
Shutdown
Shutdown
Shutdown
Shutdown
Shutdown
Mode
Mode
Mode
Mode
Mode
Mode
Mode
shift/Back
shift/Back
shift/Back
shift/Back
shift/Back
shift/Back
shift/Back
to Main
to Main
to Main
to Main
to Main
to Main
to Main
menu
menu
menu
menu
menu
menu
menu
1
2
3
<Function Buttons on main menu>Table
Serial number of push-buttons
Serial no.
4
1
Touch “
” icon to enter the External Input Funciton
2
Touch “
” icon to enter the Setting Menu
3
Touch “
” icon to return to the Previous State
4
Touch “
” icon to enter the Navigation Funtion
5
Touch “
” icon to enter the Radio Function
6
Touch “
” icon to enter the Digital/Analog TV Function
7
Touch “
” icon to enter the Bluetooth Function
8
Touch “
” icon to enter the DVD Function
9
Touch “
” icon to enter the USB Play Function
10
Touch “
” icon to return to the SD Play Function
11
Touch “
” icon to enter the IPOD Play Function
DVD Function Operation
This vehicle multimedia system can play discs of various formats, such as DVD/VCD/
CD/MP3/WMA/JPEG/MPEG4/MP5/RMVB and so on (limited to the standard round
disc with diameter of 12CM).
Basic Operation
Enter/Exit <DVD Function Operation>
Under the Main menu, touch “
” icon to enter the DVD Function.
Under the DVD status, touch the right upper corner of the screen to exit the DVD
Function
Touch “
” icon on DVD menu to exit the DVD Function.
Enter/Exit the Disc Operation
Put the side with silk-screening up, lightly put it in the slot; the disc drive can load
in the disc and play it automatically, touch “
” icon to eject out the disc.
DVD Hidden Functions
To enable user to use it more conveniently and quickly, hidden press-button function
is specially designed with this vehicle multimedia system, eight hidden touch zones
are divided under the DVD play status, as shown in the following diagram:
A
B
C
D
E
F
G
H
<DVD Hidden button Functions>Table
Serial no.
Functions
Pop-out the Search Menu
A
Return to Main Menu
B
Previous Song
C
Pop-out DVD Function Buttons
D
Next Song
E
Fast Backward
F
Pause/Play
G
Fast Forward
H
5
Notes: please use standard genuine disc, keep the disc clean, and keep good use
habit to guarantee the normal service life of this vehicle multimedia system.
Page 1 of <DVD Play Button> Table
Volume Down
Volume Up
Shut off the Display Screen,and Open It by Touching Any Position on It
Return to Main Menu
Display the Current Play Information
Enter EQ Setting
Pause/Play
Stop/Eject the Disc
Previous Song
Next Song
Fast Backward
Fast Forward
Zoom
Enter Page2
Touch “
6
” icon to enter the Play Buttons on P2. As shown in the following diagram.
Page 2 of <DVD Play Button> Table
Repeat Play
A-B Repeat Play
Sound Channel/Language Switchover
Caption Switchover
Return to Main menu
Return to Title Menu
Angle Switchover (to be supported by disc)
Enter Menu on P1
7
<Search Play Button>Table
Search Title
Search Chapter
Search Time
Exit <Search Play Press-button> Menu
Confirm the Search
Delete a Number Entered
Number Key
8
For example: to play the program section at the thirty-fifth minute
1.Touch the upper-middle position of touch screen (A zone) to pop-out the <Search
Play> Menu.
2.Touch “ Time: ” icon, enter number 3500, and then touch “
” to confirm it, the
system automatically switch to the designated position and play.
CD/MP3/WMA Disc Play
Serial no.
Functions
Enter Setup Interface
Return to Main Menu
Instruction of Current Play Information
Previous Song
Next Song
Stop
Pause/Play
Random Play
Zoom
Track List
Search Play
Repeat Play
9
<JPEG Play Button> Table
Serial no.
Functions
Return to Main Menu
Pause/Play
Stop/Eject the Disc
Previous Image
Next Image
Zoom
Rotate the Image(respectively rotate by90,180,270and zero degrees)
Select the Image Switch Mode
USB/SD/ Play
10
Notes: Please refer to CD/MP3/WMA Disc Play for the operating method of MP3/WMA file.
Radio Function
<Radio Function Button> Table
Serial no.
Functions
Enter Setup Interface
Return to Main Menu
Saved Stations On Previous Page
Station List
Saved Stations on next Page
Current Station Information
Volume Adjustment
Band Switch
Scan the Stations Saved/Press Continuously for Three Seconds for
Automatical Station Scanning.
Semi-automatically Scan Stations to Low-end Frequencies
11
Semi-automatically Scan Stations to High-end Frequencies
Adjust Channels by Single Step towards Low-end Frequencies
Adjust Channels by Single Step towards High-end Frequencies
Scan Full-band Stations
Long/Short Range Switchover
Station Scan
Search FM/AM waveband
Touch “
” key in Radio interface, switch the waveband among FM1/FM2/FM3/AM.
Semi-automatical station scan
Touch “
” key in Radio interface, the system automatically scans signals to high-
end frequencies, and stops when broadcast station with strong signal or in good
receive status is scanned; or retouch the key to stop scanning.
Touch “
” key in Radio interface, the system automatically scan signals to low-
end frequencies, and stops when broadcast station with strong signal or in good
receive status is scanned; or retouch the key to stop scanning.
Play of selected saved station
Select the waveband you wanted, and touch the Saved Station Play in Radio interface.
Manual Station Saving
Select the waveband, and then scan the station at the required frequency, select the
frequency of the station number you want to save, press the display bar continuously
for three seconds, the station is saved to the designated position.
Local Scan Mode (LOC)
Local Scan Function (LOC) only scans the stations with sufficient strong signal and in
good receive status; when Local Scan Function is activated, the DX icon on the screen
changes to LOC.
TV Function
Basic operation
Enter/Exit <TV> function
Under the Main menu, touch “
Touch “
12
” icon to enter the TV Function.
” icon under TV menu to exit the TV Function.
<TV Function Button> Table
Serial no.
Functions
Enter Setup Interface
Return to Main Menu
Saved Stations On Previous Page
4
Station List
5
Saved Stations on next Page
6
Display the Current Video
7
Scan Full-band Stations
8
Adjust Channels by Single step towards High-end Frequencies
9
Adjust Channels by Single Step towards Low-end Frequencies
10
Automatically Scan Stations to High-end Frequencies
11
Automatically Scan Stations to Low-end Frequencies
12
Scan the Stations Saved/Press Continuously for Three Seconds for
Automatical Station Scanning
13
Band Switching between TV1 and TV2
14
Current Station Information
13
Under Main menu, touch “
Touch “
” icon to enter the external input function.
” icon in External Input menu to exit External Input function.
<External Input Function Button> Table
Serial no.
Functions
Enter Setup Interface
Return to Main Menu
Enter/Exit <Bluetooth> Function
Under the Main menu, touch “
Touch “
14
” icon to enter the Bluetooth Function.
” icon under Main menu to exit the Bluetooth Function.
<Bluetooth Function Button> Table
Serial no.
Functions
Instruction of Bluetooth Connection Status
Enter Setup Interface
Return to Main Menu
Display the Current Operation Information
Answer
Hang Up
Switching Key of Mobile Phone and Bluetooth
Play/Pause
Stop
Previous Item
Next Item
Match the Mobile Phone
Delete a Entered Number
Numeric Keypad
15
1 Pairing
After entering the Bluetooth status, touch “
” icon, open the Bluetooth function of
mobile phone to search the equipment, and select “Connect” after searching out Bluetooth
of this product, (Bluetooth equipment of this unit is named “car kit”), enter the pair password
“0000”, the Bluetooth icon is displayed on upward side of the screen after the pairing is
completed successfully.
Icon of Bluetooth Connection Status:
①When icon twinkles, it means the Bluetooth equipment is not connected.
②When icon displays all the time, it means the Bluetooth equipment has been connected.
2. Making a call
Method 1: after pairing is completed successfully, type the phone number you want to
dial, and touch “Dial” icon, then you can make a call using the Bluetooth function.
Method 2: after pairing is completed successfully, directly make a call using the mobile
phone, the machine will pop-out the Bluetooth interface automatically.
3. Answering a call
After pairing is completed successfully, when there is a call coming in, the system
automatically switches to the Bluetooth status under whatever modes, touch “
” icon
to answer the phone.
4. Hanging up a call
Touch “
” icon to reject any incoming calls or end the conversation.
5. Conversation switchover
Touch “
” icon during the conversation to switch the conversation mode to the
mobile phone, touch “
” icon again to switch the conversation mode back to the
machine.
6. Bluetooth Music Play (only realizable by the mobile phone that supports the
A2DP Protocol)
After Pairing of Bluetooth and mobile phone is successfully completed, touch Play Button
in the Bluetooth interface to play the Bluetooth music.
Note: due to the difference with the brand design of mobile phone, some music can be played
only after selected through the mobile phone; some can be played just by directly touching the
play key in Bluetooth interface.
! Due to the difference of Bluetooth modules and software used by various brands of mobile
phones, there may exist certain difference and even incompatibility with some functions during
the actual use process, please forgive us for any inconveniencies caused to you!
16
Under Main menu, touch “
” icon to enter the Navigation status.
Shut off navigation in the Navigation menu to exit the navigation status.
Use “NAVI” key on the faceplate to quickly enter or exit the navigation function.
Please refer to “Instruction Book of Navigation Software” for the using method of
navigation software.
IPOD Function
Enter/Exit <IPOD> Function
Under the Main menu, touch “
” icon to enter the IPOD Function.
When under other status, insert the IPOD equipment, it automatically enters the
iPod function.
Touch “
” icon under <IPOD> menu to exit the IPOD function.
Pull out the IPOD equipment, it automatically exit the IPOD function.
Close
Normal
IPOD
17
Rearview
Enter/Exit < Rearview Mirror> Function
Adjust the gear of vehicle to the rearview gear to enter the Rearview Mirror
Function automatically.
Touch the “
” icon under <Rearview Mirror> menu to exit the Rearview Mirror
Function.
Adjust the vehicle gear to the forward or stop gear, it automatically exits the
Rearview Mirror Function.
Setting Function
Basic operation
Enter/Exit the <Setting> Function
Under the menu of various function status, touch “
Touch “
18
” icon to enter setting.
” icon under the <Setting> menu to exit the system setting function.
<DVD Setting Button> Table
Serial no.
Functions
Return to the Main Menu
Set DVD Caption
Set DIVX Caption
Set DVD Language
19
<Theme Setting Button> Table
Serial no.
Functions
Return to the Main Menu
Setting of Image Switching Effect: random/rolling blind/shutter-up and
down/shutter – left and right/shutter - flip left/shutter – flip right/screen
flip/screen rotate/fade-in fade-out/slide to left/slide to right/outward
extension/shrink inward/drag to the right/shut off.
Skin Switching
Calendar/clock Setting
Touch
20
icon in Setting menu to enter the calendar/clock setting interface.
< Calendar/clock Setting Button> Table
Serial no.
Functions
Adjust Year/Hour
Adjust Month/Minute
Switch to the Clock-adjusting Status
Return to Main Menu
Switch to the Date-adjusting Status
Confirmation
Date-adjusting
Serial no.
Functions
Return to the Main Menu
Bass Tuning up/down
Mediant Tuning up/down
High Pitch up/down
Volume Control Switch
EQ Setting
Adjust Forward of front/back Adjustment
Adjust Backward of front/back Adjustment
Adjust Leftward of left/right Adjustment
10
Adjust Rightward of left/right Adjustment
21
<Steering Wheel Setting Button> Table
Serial no.
Functions
Return to the Main Menu
Instruction of Current Operation
Common Function Buttons
Confirmation
Clear all Steering Wheel Press-buttons Settled
22
<System Setting Press-button> Table
Serial no.
Return to the Main Menu
Functions
Screen-saver Time Setting, Range of Adjustment: 0~30m shut off.
TV Signal System Setting
Language Setting: Chinese/English /Arabic/French/Russian/German
/Italian/Portuguese/Thai
Keypad Tone Setting: Shut off/Dingdong/Bubbling/Metal pad/
Spiral tone/Dangdang
Touch Screen Calibration
Picture-in-picture Setting: on/off
Reverse Switch Setting: on/off
Backsight Image Setting: normal/mirror image
Automatic Bluetooth Answer Setting: on/off
Restore to Factory Defaults
23
Setting of Navigation Path
Touch “
” icon in Setting menu to enter the Navigation Path Setting function.
<Navigation Path Setting Press-button> Table
Serial no.
Functions
Return to Main Menu
File on Previous Page
Confirm
File on next Page
Setting method of navigation path is as follows:
1.Enter the navigation path setting page.
2.Select navigation engine file, with general file extension name of .exe.
3.Touch OK to finish the setting.
Radio Setting
Touch “
24
” icon in Setting menu to enter the Radio Setting function.
<Radio Setting Press-button> Table
Serial no.
Functions
Return to Main Menu
Radio Region Setting
Touch Screen Calibration
Touch “
” icon in system setting menu to enter the touch screen calibration
interface.
Method of calibration: aim the touch pen at the central position of “+” icon, press it
continuously till the “+” icon run to the next point of calibration, repeat the above
operation, calibrate five points properly in the sequence as shown in the following
diagram, and then randomly touch one position of the touch screen to exit the touch
screen calibration status, if it does not aim at the central position of “+” icon while in
calibration, recalibration needs to be carried out, exit the touch screen calibration
status till the touch screen is properly calibrated.
25
Precautions
1.Precautions for host machine
Do not insert hard object or other metal contents in the unit.
Do not attempt to repair it. This display screen consists of many precision electronic
components, damage or breakage may be resulted in by any dismantlement or
modification, power it off immediately in case of a failure, and notify the company or
your dealer of that.
Do not expose the display screen to humidity, dust, steam, oily fume or any other
pollutants.
Do not wipe the surface of display screen with thinner or other chemical cleaners;
wipe away the dirt on the surface with a soft cloth.
Do not expose the display screen to sunlight for a long time.
If moisture content or other objects enter this unit, power it off immediately and
contact with the company or your dealer.
Please cut off the power when clearing off the dirt.
This product is designed for the vehicle equipped with 12V negative grounding
battery system.
2. Precautions for Use of Disc
Misoperation would be caused when dirty, dusty, scratched or bended disc was used.
Do not put it on sharp objects to prevent disc being scratched.
Disc shall be taken out when not used.
Disc shall not be placed in the following areas:
1.Area exposed to direct sunlight.
2.Dirty, dusty and humid areas.
3.Area where there is an auto heater nearby.
4.On vehicle seat or meter panel.
Do not use disc with diameter less than 12cm (12cm excluded) or irregularly shaped
disc (heart shape or octagon and so on)
Disc cleaning: wipe the disc surface with a soft wet cloth; if the disc is very dirty, wipe
it gently with a soft cloth soaked with warm propanol liquid. Do not use solutes, such
as gasoline, thinner and so on, to prevent disc surface being scratched.
3. Precautions for External Connected Power Amplifier
Before connecting, check to ensure the sound box impedance matches the optimal
matching impedance of power amplifier.
Please select high-quality loudspeaker cable; the cable length shall be just sufficient
for proper in-position connection.
When connecting the signal line, the jack/interface of sound track shall match exactly.
To reduce noise, when there is a external connected power amplifier, first adjust the
volume of Host machine to 1/3 of the maximum sound level, and then adjust the
volume of external connected power amplifier, till the sound is distorted (note: the
tone shall be adjusted centered).
While in installation, the input/output line shall be far away from power source and
computer wire, otherwise noise may be caused.
26
Troubleshooting
Before sending this unit for repair, check the problem that has occurred with the unit
against the following table, and take corresponding countermeasures to carry out
simple inspection or minor adjustment, thus the problem may be possibly eliminated
and the unit may restore normal operation. If the problem cannot be effectively
resolved with the remedies as shown in the table, please contact our company or the
professional maintenance center.
Power switch and
Connect the switch
ignition switch not
connected
Connection wire loose
Reconnect it properly
Protective tube burn out Replace it with a new protective tube
The system is in Mute
Shut off Mute
status
Sound box connection
Reconnect it properly
loosen off
Sound box damaged
Replace it with a new sound box
Disc not properly loaded Place the disc with the label side
face-up on the tray
Disc dirty or damaged
Try other discs
Disc dirty or damaged
Try other discs
Host machine not
Ensure the host machine firmly fixed
properly installed
Changer fixing screw
Adjust the screw marked with
screwed down in the
screwdriver to the proper mounting
wrong position
direction
Not properly matched
Rematch
with host machine
Directions: please operate it in accordance with this Manual before using;
This unit is made of precision components, pay attention to guard against damp;
Pay attention to prevent LCD display being scratched;
High pressure in the unit, dismantlement can only attempted by authorized personnel;
Instructions: few color dots may appear on LCD display, it is a common phenomenon in active matrix display
technology, and does not represent any defects or faults.
27