PRODUCT
GUIDE 2015
US Market USD / $
Tel: 978 277 1234
www.digitalyachtamerica.com
Edition 1 | 2015
Tel: 978 277 1234 | www.digitalyachtamerica.com | Edition 1 | 2015
1
AIS
NAVIGATION
WIRELESS
NAVIGATION
WIRELESS
INTERNET
MARINE PCS
ONBOARD
ENTERTAINMENT
SOFTWARE
BOATRANET
DIGITAL
DEEP SEA
2
Tel: 978 277 1234 | www.digitalyachtamerica.com | Edition 1 | 2015
DIGITAL YACHT 2015 IS ALL ABOUT NEXT
GENERATION NAVIGATION, COMMUNICATION
AND ENTERTAINMENT SYSTEMS FOR YOUR
BOAT. BOATING SHOULD BE FUN, SAFE AND
EASY AND OUR PRODUCTS INTEGRATE INTO
EXISTING AND NEW BOAT NETWORKS TO
BRING A POWERFUL DIMENSION TO YOUR
ON-BOARD ELECTRONICS.
We firmly believe that low cost consumer devices such as iPhones and tablets, PCs and MACs have
a place on board and can help make legacy systems compete with the latest in dedicated marine
electronic products at a fraction of the cost. We make internet access whilst afloat easy and affordable as well as bringing all your navigation data to your favourite consumer devices - not just for you
but for crew and guests too.
Our navigation systems cover advanced GPS and compass technology as well as the most comprehensive range of AIS products in the marketplace. Plus our PC and software solutions bring simple
yet powerful solutions to a variety of on board requirements from communication to navigation,
entertainment to monitoring.
Our design team has 100’s years combined experience in marine electronic systems and we take
pride in our quality heritage with manufacturing in the UK and global reach with offices in the US and
China. Last year our products were sold in over 100 countries worldwide.
Good Boating,
Nick Heyes
Tel: 978 277 1234 | www.digitalyachtamerica.com | Edition 1 | 2015
3
AIS SYSTEMS
AIS100 RECEIVER (NMEA 0183)
VHF
ANTENNA
Typical system
“Connects to any NMEA AIS compatible chart plotter and adds
an AIS overlay. Simple to install, highly sensitive dual channel
design that’s easy to install with Garmin, Raymarine, Standard,
Lowrance, Simrad, Furuno etc plotters”
KEY FEATURES
This value priced, entry level AIS receiver is Digital Yacht’s most
cost effective solution for adding AIS to your boat. Featuring the
same dual channel receiver as the AIS100Pro, but without the
USB interface and multiplexer, there is no compromise on performance and the AIS100 will out-perform all other, inferior, single
channel receivers.
SPECIFICATIONS
• Low cost entry level AIS receiver
• High performance dual-channel AIS receiver for use with existing plotter and radar systems
• High speed NMEA output (38,400 baud)
• Requires VHF antenna or dedicated AIS antenna (available as
optional accessory) or splitter
• Easy to install IP54 black box solution
• BNC antenna connector
EXTRA APPLICATIONS
For use with existing AIS compatible chart plotters, such as the latest
Garmin, Raymarine, Navico, Standard Horizon and Furuno units. Typical AIS reception range is 20 – 20 m for a mast top antenna.
All Digital Yacht systems ship with
SmarterTrack Lite PC software
Use the SPL2000 VHF — AIS antenna
splitter to share the vessels VHF antenna
with VHF and AIS.
PRICE
DIMENSIONS
PART NUMBER
SUPPLIED WITH
(L x W x D)
UPC
Power/Data cable, AIS Lite software
105mm x 72mm x 32mm
ZDIGAIS100
738435472382
AIS
4
Integral mounting brackets, 0.75m
on CD and User Manual
INTERFACE
Tel: 978 277 1234 | www.digitalyachtamerica.com | Edition 1 | 2015
$ 239.95
AIS SYSTEMS
AIS100 RECEIVER (USB)
VHF
ANTENNA
Typical system
“Perfect for PC based navigation systems with USB drivers for
PC, MAC and linux”
KEY FEATURES
This value priced, entry level AIS receiver is Digital Yacht’s most
cost effective solution for getting AIS on your PC. Featuring the
same dual channel receiver as the AIS100Pro, but without the
NMEA 0183 Output and multiplexer, there is no compromise on
performance and the AIS100USB will out-perform all other, inferior,
single channel receivers.
SPECIFICATIONS
• Low cost entry level AIS receiver
• High performance dual-channel AIS receiver for use with AIS
compatible PC navigation software
• USB Interface for simple Plug and Play connection to a PC
• Requires VHF / AIS antenna or splitter
• Easy to install IP54 black box solution
EXTRA APPLICATIONS
Simple plug and play USB connection to a PC. Uses standard drivers built-in to Windows XP/Vista/7 and is automatically
mapped to an available “virtual” com port, which your PC software
can read. Also compatible with Mac OS X and all LINUX Kernels
since V2.4.20.
For use with any AIS compatible PC navigation software, such as
the latest SmarterTrack, MaxSea, SeaPro, Nobeltec and RosePoint applications.
All Digital Yacht systems ship with
SmarterTrack Lite PC software
Use the SPL2000 VHF — AIS antenna
splitter to share the vessels VHF antenna
with VHF and AIS.
DIMENSIONS
PART NUMBER
SUPPLIED WITH
PRICE
(L x W x D)
UPC
Power cable, 0.75m USB cable,
105mm x 72mm x 32mm
ZDIGAIS100USB
Integral mounting brackets, 0.75m
$ 239.95
AIS Lite software on CD and User
738435472399
Manual
AIS
USB
LINUX
MAC
WINDOWS 8
Tel: 978 277 1234 | www.digitalyachtamerica.com | Edition 1 | 2015
5
AIS SYSTEMS
AIS100PRO RECEIVER (NMEA & USB)
VHF
ANTENNA
Typical system
“Combination NMEA and USB connections for PC and plotter
based systems. Also features NMEA input and inbuilt multiplexer”
KEY FEATURES
Great entry-level AIS receiver for use with PC navigation software
and chart plotters, such as the latest Garmin, Raymarine, Navico,
Standard Horizon and Furuno units. Connected to an existing VHF
antenna (via a splitter) or dedicated AIS antenna, you can receive
all AIS targets within range – typically up to 30nm. Simple plug
and play USB connection to a PC. Uses standard drivers built-in to
Windows XP/Vista/7 and is automatically mapped to an available
“virtual” com port, which your PC software can read. Also compatible with Mac OS X and all LINUX Kernels since V2.4.20. SPECIFICATIONS
• High performance dual channel AIS receiver for use with existing
plotter and radar systems
• USB Interface for simple plug ‘n play connection to a PC
• High Speed NMEA output (38,400 baud)
• Requires VHF antenna or dedicated AIS antenna (available as
optional accessory) or splitter
• Multiplexed NMEA input for single NMEA GPS+AIS data output
at 38,400 baud
• Easy to install IP54 black box solution
EXTRA APPLICATIONS
The AIS100 Pro has a dual NMEA0183 and USB output capability,
allowing you to supply AIS data to a PC (via USB) and a dedicated
plotter (via NMEA) for larger installations. Connect the NMEA (4800 baud) output of your GPS to the
AIS100Pro and it will automatically multiplex (merge) the slower
GPS data with the high speed AIS data and transmit everything on
the high speed NMEA output (38,400 baud) - perfect for connection to a chart plotter with only one NMEA input. All Digital Yacht systems ship with
SmarterTrack Lite PC software
DIMENSIONS
PART NUMBER
SUPPLIED WITH
(L x W x D)
UPC
Power/Data cable, 0.75m USB
105mm x 72mm x 32mm
ZDIGAIS100P
Integral mounting brackets, 0.75m
030955183657
cable, AIS Lite software on CD and
User Manual
AIS
6
USB
INTERFACE
MULTIPLEXER
LINUX
MAC
WINDOWS 8
Tel: 978 277 1234 | www.digitalyachtamerica.com | Edition 1 | 2015
Use the SPL2000 VHF — AIS antenna
splitter to share the vessels VHF antenna
with VHF and AIS.
PRICE
$ 279.95
NOW WITH
SUPPORT
FOR
GOOGLE
ANDROID
AIS SYSTEMS
iAIS
RECEIVER
VHF
ANTENNA
Typical system
“Award winning AIS receiver with wireless interface. Connect to
your plotter, PC and mobile device through a wireless interface.
Turns your iPhone or iPad into a full function AIS display and
now also compatible with apps for Android too.”
KEY FEATURES
The world’s first wireless AIS receiver that links wirelessly with
the latest iPhone, iPad and iTouch devices. Consisting of a high
performance dual channel AIS receiver, an integrated 802.11b+g
wireless access point plus a free app downloadable from the
Apple App Store, the iAIS brings AIS data to a whole new generation of mobile devices.
iAIS also multiplexes any other NMEA data that is available on board
the boat - for instance GPS, depth, speed and wind etc. All of this data is combined with the AIS data into a single wireless
feed, that becomes available on any compatible application. By
using the boat’s own GPS, even an iTouch or iPad that does not
have an internal GPS can now be used for navigation and superior
performance will also be seen on an iPhone, which some users have
complained suffers from jitter or poor lock-on with its internal GPS.
The free iAIS app is available from the App store and is a simple
AIS display program. For more advanced use, Digital Yacht recommends the iNavX app (www.inavx.com). Now supports TPC/IP
and UDP connection for multiple uses.
SPECIFICATIONS
• World’s first wireless AIS and NMEA Data server
• Tri-output; WiFi, NMEA 0183 and USB
• Multiplexed NMEA input for wireless NMEA data feed of boat’s
instrument and GPS data
• TCP & UDP connectivity
• Free iAIS App for iPhone, iTouch or iPad
• Integrated 802.11b+g wireless access point
• Fully compatible with popular iNavX navigation application for
Apple mobile devices
• Rugged IPX5 aluminium housing
• Requires VHF antenna or dedicated AIS antenna (available as
optional accessory) or splitter
• Simple “fit and forget” black box solution
As well as sending data wirelessly, the iAIS also has an NMEA0183
and USB interface so that you can output data to a PC (via
USB) and a dedicated plotter (via NMEA) for larger installations. DIMENSIONS
PART NUMBER
SUPPLIED WITH
(L x W x D)
UPC
cable, 1m USB Cable, iAIS app
150mm x 150mm x 37.5mm
ZDIGiAIS
738435472375
Mounting brackets, 1m Power/Data
PRICE
$ 549.95
(from Apple App Store), software CD
and User Manual
AIS
USB
INTERFACE
WIRELESS
MULTIPLEXER
WINDOWS 8
LINUX
MAC
Tel: 978 277 1234 | www.digitalyachtamerica.com | Edition 1 | 2015
IOS
ANDROID
7
AIS SYSTEMS
AISNET INTERNET BASE STATION
VHF
ANTENNA
Typical system
“Network enabled AIS receiver for base station operation.
Simple RJ45 network interface and USB too. Perfect for use
with Marine Traffic or AIS Live”
KEY FEATURES
AISnet is a new AIS base station receiver for use at home or in
the office. Utilising the same high performance dual channel AIS
receiver as the rest of the Digital Yacht range, AISnet also features
an ethernet socket that can connect to a broadband router to
send data to online AIS tracking services.
There are now a large number of internet based web sites, which
offer a view of AIS equipped vessels on a background chart allowing users to check the position and identity of ships and yachts.
If your home/office is close to the coast you can contribute your
data to one of these sites, simply register with the company and
they will give you an IP address and port number.
connector into your PC and AIS data will appear on your PC,
whilst also transmitting over the internet.
AISnet is supplied with a universal UK/Euro/US mains adaptor that
provides a regulated 12v supply from 240v/110v AC mains.
SPECIFICATIONS
• AIS base station for home or office use
• Integrated ethernet network controller for supplying AIS data to
online AIS websites
• High performance dual channel AIS receiver
• Simple configuration via free setup program
• USB Interface for simple plug and play connection to a local PC
• Requires VHF antenna or dedicated AIS antenna (available as
optional accessory) or splitter
• Universal Mains power supply included
• Simple “fit and forget” black box solution
Using the setup program that Digital Yacht supply, it takes
seconds to program the IP address and port into AISnet, which
will immediately start sending your local AIS data seamlessly
across the internet to be displayed on the site.
Data that AISnet is collecting, can also be viewed locally on your
PC using the free SmarterTrack Lite software. Plug the USB
DIMENSIONS
PART NUMBER
SUPPLIED WITH
(L x W x D)
UPC
USB Cable, AIS Lite + Setup
244mm x 150mm x 60.5mm
ZDIGAISNET
UK/Euro/US mains adaptor, 1m
738435472429
AIS
8
USB
NETWORK
WINDOWS 8
software on CD and User Manual
LINUX
MAC
Tel: 978 277 1234 | www.digitalyachtamerica.com | Edition 1 | 2015
PRICE
$ 499.95
AIS SYSTEMS
ANT200 RECEIVER
Typical system
“The AIS Smart Antenna — Mount ‘n connect AIS sensor with
integrated antenna. Standard NMEA plotter compatible output”
KEY FEATURES
Perfect “all in one” AIS Smart Antenna solution for small boats,
particularly RIBs, sports boats and small yachts, where dry space
to mount black box AIS units is limited. Simply connect 12v or
24v power and the ANT200 will start transmitting data on all AIS
targets within range of your boat – typically 10-15NM*. Ideal for
use with existing AIS compatible chart plotters, such as the latest
Garmin, Raymarine, Navico, Standard Horizon and Furuno units.
SPECIFICATIONS
• World’s first AIS smart antenna
• Multiplexed NMEA input for single NMEA GPS+AIS data output
at 38,400 baud
• Simple to install “all in one” smart antenna solution
• Integral 1” x 14 TPI thread for fixing to standard VHF mounts
• 15m power/data cable
• High performance dual channel AIS receiver for use with existing
plotter and radar systems
• High speed NMEA output (38,400 baud) Connect the NMEA0183 (4800 baud) output of your GPS to the
ANT200 and it will automatically multiplex (merge) the slower GPS
data with the high speed AIS data and transmit everything on one
high speed NMEA output (38,400 baud) - perfect for connection
to a chart plotter with only one NMEA input. * NOTE – similar to hand-held VHFs, which have a reduced range compared to fixed
mount VHFs (no antenna ground plane), the ANT200 does not have the same range
as the AIS100/200 black box AIS units. If maximum AIS range is your highest priority
then one of the other Digital Yacht receivers should be used, but for small boats with
the aerial mounted at deck level, 10 miles is a good range for AIS and the ANT200 is
recommended.
DIMENSIONS
PART NUMBER
SUPPLIED WITH
(H x W)
UPC
Manual. AIS Lite included
180mm x 100mm
ZDIGANT200
15m Power/Data cable and User
PRICE
$ 349.95
738435472597
AIS
INTERFACE
MULTIPLEXER
Tel: 978 277 1234 | www.digitalyachtamerica.com | Edition 1 | 2015
9
AIS SYSTEMS
uAIS
RECEIVER
Typical system
“Self-powered AIS sensor with integrated antenna. Connects direct
to PC USB port. Ideal for charter use with PC navigation programs”
KEY FEATURES
Perfect “all in one” AIS Smart Antenna solution for anyone using a
Laptop on a small boat that wants to receive AIS data.
Simple plug and play USB connection to a PC. Uses standard drivers built-in to Windows XP/Vista/7 and is automatically
mapped to an available “virtual” com port, which your PC software
can read. Also compatible with Mac OS X and all LINUX Kernels
since V2.4.20. SPECIFICATIONS
• USB powered AIS smart antenna
• Simple to install “all in one” smart antenna solution
• Integral 1” x 14 TPI thread for fixing to standard VHF mounts
• 5m USB cable
• High performance dual channel AIS receiver for use with existing
plotter and radar systems
• High speed NMEA output (38,400 baud)
EXTRA APPLICATIONS
For use with any AIS compatible PC navigation software, such as
the latest SmarterTrack, MaxSea, SeaPro, Nobeltec and RosePoint applications.
* NOTE – similar to hand-held VHFs, which have a reduced range compared to fixed
mount VHFs (no antenna ground plane), the uAIS does not have the same range as the
AIS100/200 black box AIS units. If maximum AIS range is your highest priority then one
of the other Digital Yacht receivers should be used, but for small boats with the aerial
mounted at deck level, 10 miles is a good range for AIS and the uAIS is recommended.
All Digital Yacht systems ship with
SmarterTrack Lite PC software
DIMENSIONS
PART NUMBER
SUPPLIED WITH
(H x W)
UPC
AIS Lite included
180mm x 100mm
5m USB cable and User Manual.
ZDIGuAIS
030955183633
AIS
10
USB
WINDOWS 8
LINUX
MAC
Tel: 978 277 1234 | www.digitalyachtamerica.com | Edition 1 | 2015
PRICE
$ 349.95
NEW
FOR
2015
AIS SYSTEMS
AIT1500 CLASS B AIS TRANSPONDER
VHF
ANTENNA
Typical system
“An easy to install Class B AIS with built in GPS antenna and
universal NMEA 0183 interface”
KEY FEATURES
The regulations for AIS demand that the Class B transponder has
to incorporate its own GPS positioning receiver which normally
involves fitting an external antenna. The AIT1500 incorporates a
high sensitivity GPS antenna within its compact case which saves
on antenna clutter and makes for a speedy installation. It’s ideal
for fitting on smaller vessels and tenders. It uses a NMEA0183
interface for simple connection to the vast majority of AIS compatible chart plotters and also has a separate 4800 baud GPS data
output for the DSC VHF if required. It consumes less that 2W
power and can operate on 12/24V systems. It also features a
silence capability so the AIS transmissions can be muted while
continuing to receive AIS traffic.
or AquaWear WLN20 wireless data gateway to feed data to a
tablet or iPad
SPECIFICATIONS
• Advanced AIS design for the best performance
• Waterproof compact enclosure
• Built in internal GPS antenna
• Dual NMEA 0183 outputs at 4800/38400 baud
• USB interface
• PC & MAC programming software included
• NMEA input multiplex function
• Silence switch option
• Supplied with programming and utilities CD
There is a USB interface for programming as well as for PC/MAC
based navigation. It’s compatible with Digital Yacht’s NavLink
MAC app and SmarterTrack PC navigation system
GPS signals will pass through plastic, glass and GRP so it will be
able to be mounted below decks on many boats. A dedicated
VHF antenna is required for the AIS or a suitable VHF-AIS antenna
splitter such as the SPL2000. It can also connect to the WLN10
DIMENSIONS
PART NUMBER
SUPPLIED WITH
(H x W)
UPC
USB cable and programming/
120 x 160mm
ZDIGAIT1500
0.75M power and data cable, 0.75m
081159830366
TRANSMITTER
AIS
USB
INTERFACE
MULTIPLEXER
PRICE
$ 649.95
utilities CD
GPS
WINDOWS 8
LINUX
MAC
Tel: 978 277 1234 | www.digitalyachtamerica.com | Edition 1 | 2015
ANDROID
11
AIS SYSTEMS
AIT2000 TRANSPONDER (CLASS B)
Typical system
“Great value, flexible AIS transponder solution with multiple
outputs to suit every installation and optional wireless solution”
KEY FEATURES
The AIT2000 uses the latest AIS Transponder technology to squeeze
more performance and interfacing options in to a housing that is half
the size of our previous generation transponder.
This ultra-compact Class B Transponder has three outputs; NMEA
0183, NMEA 2000 and USB connection, allowing it to work with
every AIS compatible chart plotter or software package on the market
today. Featuring a remote silence button option, two NMEA 0183
Inputs and Outputs, four status LEDs and rugged vibration-proof
mounting brackets, the AIT2000 is the third generation of Digital Yacht
AIS transponder and replaces the very popular AIT1000.
Configuration of your vessel’s fixed data, such as MMSI, call
sign, boat name, dimensions etc. is made easy with the included
Windows and Mac compatible proAIS2 software. Once configured,
the unit will provide AIS data to a PC or Mac running suitable
navigation software or a dedicated chart plotter, such as the latest
Garmin, Raymarine, Navico, Standard Horizon and Furuno units.
As well as transmitting your own vessel’s position so that other
AIS equipped vessels know where you are, the AIT2000, when
connected to an existing VHF antenna (via a splitter) or dedicated
AIS antenna, will receive all AIS targets within range of your boat –
typically up to 30NM
With two industry standard NMEA 0183 outputs, our own N2NET
connector for plugging in to an NMEA 2000 network and a simple
plug and play USB connection to a PC, the AIT2000 is the perfect
AIS transponder solution for all light marine vessels up to 300 tonnes.
SPECIFICATIONS
• Latest generation AIS technology – featuring a brand new AIS
transponder (Class B) design
• Ideal for use with existing plotter and radar systems
• Built-in high performance 50 channel GPS receiver (ideal also as a
backup GPS)
• USB Interface for simple plug and play connection to a PC or Mac
• Includes N2Net interface and cable for connection to NMEA 2000
network
• High speed NMEA output (38,400 baud) – compatible with industry
standard plotters
• Comes complete with GPS antenna with integral 1”x14TPI
thread mount
• Requires VHF antenna or dedicated AIS antenna (available as
optional accessory) or splitter (SPL2000)
• Remote Silence Switch option
• Supplied with programming software for user programming*
• Easy to install black box solution
*Except US where dealer programming required
DIMENSIONS
PART NUMBER
SUPPLIED WITH
(L x W x D)
UPC
USB cable, 0.75m N2Net cable,
150mm x 155mm x 37.5mm
ZDIGAIT2000
030955183626
TRANSMITTER
12
AIS
USB
INTERFACE
PRICE
0.75m Power/Data cable, 0.75m
$ 729.95
GPS Antenna
INTERFACE
MULTIPLEXER
INTERFACE
GPS
WINDOWS 8
Tel: 978 277 1234 | www.digitalyachtamerica.com | Edition 1 | 2015
LINUX
MAC
NEW
FOR
2015
AIS SYSTEMS
AIT3000 NUCLEUS CLASS B AIS TRANSPONDER
Typical system
“The AIT3000 integrates a Class B AIS transponder with a ZeroLoss
VHF-AIS splitter and full featured interface including NMEA0183,
NMEA2000, USB and wireless making it easy and fast to install as
well as offering maximum connectivity.”
KEY FEATURES
Class B AIS transponders have made a remarkable impact on
small craft navigation but many potential users or installers are
put off by the requirement for yet another VHF antenna.The
AIT3000 “Nucleus” Class B transponder changes this.
It incorporates not only a full function Class B AIS transponder
but also an antenna splitter allowing the main VHF antenna
on the boat to be shared with the AIS and VHF. It’s also been
designed with the latest interfacing capability including NMEA
0183, NMEA 2000, USB and a WiFi server to integrate with
tablets and iPads – hence the name Nucleus as it becomes
the hub for on board navigation. NMEA 0183 data from other
on board systems can also be multiplexed by the Nucleus and
combined on the WiFi link. Nucleus brings a new level of connectivity and integration.
Digital Yacht has iAIS and NavLink apps for iOS and AISView for
Android.
SPECIFICATIONS
• Combination Class B AIS transponder with patented ZeroLoss
VHF-AIS antenna splitter
• Full connectivity via
• NMEA0183 Dual In/Out Interfaces
• Built in multiplexer for instrument data
• NMEA 2000 output
• USB (PC and MAC)
• Inbuilt WiFi server for tablets & smartphones
• Remote silence switch capability
• Ultra tough, waterproof and compact construction
• FM antenna output
• Supplied with GPS antenna
• Supported range of apps for iOS, Android, PC & MAC
SUPPLIED WITH
MA800 GPS antenna
SmarterTrack Lite and proAIS2
3dBi WiFi antenna
iAIS - Free download from Apple
0.8m NMEA 2000 drop cable (male)
app store
Today’s boat is all about connectivity - the Nucleus offers not only
NMEA interfacing but USB for PC and MAC and WiFi for tablets
and smartphones.
0.8m NMEA 0183 power-data cable
Mounting brackets
0.8m USB cable
PL259 patch cable for VHF
DIMENSIONS
PRICE
PART NUMBER
220mm x 130mm
Driver and software CD with
$ 1395.95
ZDIGAIT3000
UPC
081159830304
TRANSMITTER
AIS
USB
INTERFACE
INTERFACE
MULTIPLEXER
WIRELESS
GPS
WINDOWS 8
LINUX
Tel: 978 277 1234 | www.digitalyachtamerica.com | Edition 1 | 2015
MAC
RADIO
ANDROID
13
AIS SYSTEMS
GV30 AIS VHF GPS ANTENNA
Typical system
“Combination AIS/VHF and GPS antenna for Class B transponders
which makes for a super quick and high performance installation”
KEY FEATURES
A Class B AIS transponder requires a dedicated GPS antenna (all
Class B units must have their own internal GPS and can’t use an
external feed for regulatory purposes) as well as a VHF antenna or
suitable VHF-AIS antenna splitter. The GV30 is a combination VHF/
AIS and GPS antenna with twin coax feeds (10m). It’s fitted with
a standard 1” threaded base so will mount onto a variety of deck,
pole and rail attachments available from many 3rd party suppliers.
SPECIFICATIONS
• Combination AIS/VHF and GPS antenna
• Specifically tuned to 162MHz
• High gain GPS element
• Supplied with 2 x 10m cable tails fitted with mini connectors for
easy cable installation
• Standard 1” threaded base for compatibility with a variety of 3rd
party mounts
• Supplied with TNC (GPS) and BNC (AIS) adaptors
• Under 200mm high for low profile installation
The 10m coax cables are terminated with a FME mini connector
which makes running the cable easy as the connector is barely
bigger than the 5mm cable. We then supply suitable adaptors for
the TNC and BNC connectors on our AIT2000.
The GV30 is just 190mm high and 75mm in diameter. Despite
its compact dimensions, it offers very good performance as its
specifically tuned to 162MHz (AIS frequency). The GV30 is also
available with the AIT2000 as a bundle
DIMENSIONS
PART NUMBER
SUPPLIED WITH
(L x H)
UPC
cables, TNC adaptor and BNC
75MM X 190MM
ZDIGGV30
081159830076
Supplied with user manual, 10m
adaptor
Note: not supplied with base
AIS
14
RADIO
GPS
Tel: 978 277 1234 | www.digitalyachtamerica.com | Edition 1 | 2015
PRICE
$ 160.00
AIS SYSTEMS
SPL2000 VHF-AIS ANTENNA SPLITTER
Typical system
“Patented zero loss technology lets you share your main
VHF antenna with both the VHF and AIS. Compatible with
transponders and receivers”
KEY FEATURES
An AIS receiver or transponder requires a VHF antenna, but Digital
Yacht’s new SPL2000 AIS-VHF antenna splitter allows an existing
antenna to be used for both the AIS and VHF (DSC) and even with
an AM/FM radio. Unlike most simple splitters, it can also be used
with a class B transponder system and it incorporates special
circuitry to ensure safe operation of the two transmitting devices.
The unit has four simple connections - one input for the main
VHF antenna and then outputs for the AIS receiver/transponder,
DSC VHF as well as an optional car radio output. It utilises Digital
Yacht’s new, patented, ZeroLossTM technology, to ensure the very
best possible reception and transmission from all devices. Most
importantly it is also fail safe, so should the unit ever stop working
or lose power, it will not affect the main VHF operation.
Until now, Digital Yacht, have recommended a dedicated antenna
for a receiver or transponder. However, with the new this new
ZeroLoss ™ technology, we can now offer a solution that greatly
simplifies installation whilst maintaining performance.
The unit is waterproof and matches the aesthetics of the current
range of transponders and receivers, so can easily be integrated
into any vessel. It is suitable for operation on 12V or 24V systems
and features three status LEDs that show the unit is powered
correctly and when the AIS or VHF transmits.
SPECIFICATIONS
• Enables an existing VHF antenna to be used for both the standard VHF and AIS system
• Patented ZeroLoss™ technology for exceptional performance
• Works with all Class B transponders and receivers
• Supplied with power cable, PL259-PL259 cable assembly and
BNC-BNC cable assembly for easy installation (all cables 0.75m
long)
• AM-FM radio antenna connection for standard car stereo radio
(integrated in power cable)
• 12v or 24v 0peration and low power consumption
• Fail safe operation
• Same size and design as the new AIT2000
• Makes installation of an AIS receiver or transponder very quick
and simple
• Saves on additional antenna clutter
DIMENSIONS
PART NUMBER
SUPPLIED WITH
(L x W x D)
UPC
interconnect cables, 0.75m power
150mm x 155mm x 37.5mm
ZDIGSPL2000
030955183756
0.75m PL259 and BNC Coax
PRICE
$ 369.95
lead, integral fixing brackets and
manual
AIS
RADIO
Tel: 978 277 1234 | www.digitalyachtamerica.com | Edition 1 | 2015
15
AIS SYSTEMS
AIS LIFE GUARD (AIS MAN OVERBOARD ALARM)
VHF
ANTENNA
LIFE GUARD
AIS
Optional external alarm
Typical system
“AIS SART Alarm — Connects to any of our AIS devices and
detects a SART target — ideal for use as a MOB system with
personal SARTs”
KEY FEATURES
The AIS Life Guard is the world’s first AIS Man Overboard Alarm
designed to work with the new generation of AIS SARTs that have
recently been approved for global use by the IMO.
Many existing AIS compatible chart plotters do not fully support AIS
SARTs but with the AIS Life Guard connected to an AIS transponder
or AIS receiver, you can have a complete working AIS SART man
overboard system. Operation is automatic, simply connect the two
wire NMEA input on the AIS Life Guard to the NMEA output of your
AIS and it will listen to all AIS traffic.
All Digital Yacht AIS receivers and transponders are compatible
with the AIS Life Guard and it is designed to operate on 12v or 24v
DC systems.
SPECIFICATIONS
• World’s first dedicated AIS Man Overboard Alarm system
• Listens to AIS data on NMEA0183 Input
• Alarms when AIS SART message 1 and 14 are detected
• Internal 95dB buzzer with option to drive external alarm (not
supplied)
• Audible and Visual Alarms
• Push button to silence alarm (short press) and reset alarm (long
press)
• Easy to install IP54 black box solution
As soon as an AIS SART transmission is detected the AIS Life
Guard will sound its internal 95dB alarm and display a red warning
light. For larger installations, it can also be connected to an external
alarm (not supplied) so that the whole boat is immediately alerted.
The AIS Life Guard detects both message 1 and message 14, the
two AIS messages reserved for AIS SARTs and will also give a short
three beep alarm if it detects an AIS SART test message, great for
checking correct operation of your AIS SARTs prior to a voyage.
DIMENSIONS
PART NUMBER
SUPPLIED WITH
(L x W x D)
UPC
Manual
150mm x 155mm x 37.5mm
ZDIGAISLG
0.75m Power/Data cable and User
30955183718
AIS
16
SAFETY
INTERFACE
Tel: 978 277 1234 | www.digitalyachtamerica.com | Edition 1 | 2015
PRICE
$ 299.95
AIS SYSTEMS SPECIFICATIONS
AIS100
KEY FEATURES
Value priced
AIS receiver
with NMEA
0183 38400
baud industry
standard
output
AIS100
USB
Value priced
AIS receiver
with USB
PC/MAC
connection.
Requires
separate DC
power
AIS100
PRO
AIS Receiver
with dual USB
and NMEA
(38400 baud)
output. NMEA
Input with
multiplex
capability too
AIS200
N2NET
Offers AIS
functionality
plus NMEA
0183 multiplex
facility, N2K
output and
PC USB
connection
ANT200
Self contained
AIS “Smart”
antenna with
NMEA 0183
38400 baud
output and
NMEA input
multiplex
capability
uAIS
Self contained
AIS “Smart”
antenna
with USB
connection
for power and
data. Ideal
for use on PC
navigation
systems
iAIS
Combination
AIS receiver
and NMEA
multiplexer
for iPhone/
Pad products
with wifi and
traditional data
outputs
AISNET
Shore side
network
receiver for
use as AIS
feed to internet
tracking sites
and other
network
applications
DUAL CHANNEL
RECEIVER
RECEIVER
FREQUENCY
161.975 MHZ 161.975 MHZ
162.025 MHZ 162.025 MHZ
RECEIVER SENSITIVITY
<-107dBm at
20% PER
<-107dBm at
20% PER
161.975 MHZ
162.025 MHZ
<-107dBm at
20% PER
NMEA 0183 38400
BAUD OUTPUT
161.975 MHZ
162.025 MHZ
161.975 MHZ
162.025 MHZ
161.975 MHZ
162.025 MHZ
<-107dBm at
20% PER
<-107dBm at
20% PER
<-107dBm at
20% PER
161.975 MHZ
162.025 MHZ
<-107dBm at
20% PER
161.975 MHZ
162.025 MHZ
<-107dBm at
20% PER
Two
USB PC CONNECTION
N2NET/NMEA 2000
OUTPUT
ETHERNET OUTPUT
VIA RJ45
WIFI OUTPUT
Optional with
WLN10HS
Optional with
WLN10HS
Optional with
WLN10HS
Optional with
WLN10HS
WIFI RANGE TYP
30-100m max
N° OF WIFI USERS
Five
NMEA INPUT
MULTIPLEX
Two
PC SOFTWARE
POWER
REQUIREMENT
12/24V
12/24V
12/24V
12/24V
12/24V
USB from PC/
MAC
12/24V
12/24V DC.
AC 110/220
V ADAPTOR
SUPPLIED
90mA
90mA
90mA
80mA
90mA
90mA
250mA
250mA
PROTECTION
IPX4
IPX4
IPX4
IPX5
IPX7
IPX7
IPX5
IPX0
ANTENNA
CONNECTION
BNC (F)
BNC (F)
BNC (F)
BNC (F)
N/A
N/A
BNC (F)
BNC (F)
75x105x32mm
(HxWxD)
152x 152x
152mm
(HXWXD)
180x100mm
(HxDia)
180x100mm
(HxDia)
150x150x
38mm
(HxWxD)
150x244x 61mm
(HxWxD)
POWER DRAW
(TYPICAL MAX 12V)
VHF ANTENNA
REQUIRED *
DIMENSIONS
75x105x32mm 75x105x32mm
(HxWxD)
(HxWxD)
* or compatible AIS VHF splitter
Tel: 978 277 1234 | www.digitalyachtamerica.com | Edition 1 | 2015
17
NAVIGATION SENSORS
HSC100 COMPASS SENSOR
The HSC100 will provide a 10Hz fast
heading output for AIS, MARPA, radar
course up/north up and chart plotter
applications
Typical system
“Fluxgate compass with auto calibration and fast heading
output for MARPA or course up radar stabilisation”
KEY FEATURES
Accurate compass heading data remains a fundamental parameter
for marine navigation and the HSC100 uses fluxgate technology
to deliver heading data for on board systems. Typical applications
include enabling course up and true motion type displays on chart
plotters, radar overlay onto electronic charts and stabilisation of
radars when used for MARPA/ARPA target tracking. Integrated
instrument systems can also benefit from having compass information to calculate real time tidal set and drift when interfaced with
a log and GPS.
Most low cost heading sensors only output data at 1Hz (once
per second) but the HSC100 outputs at 10Hz which is required
for MARPA target tracking and accurate radar overlays (Part #
ZDIGHSC100).
We have also released a new “Rate of Turn” version of the
HSC100 that outputs the HDT and ROT messages required by
a Class A transponder. For non-mandatory vessels, this provides
a simple low cost solution for adding heading and rate of turn to
Class A transponders (Part # ZDIGHSC100T)
DIMENSIONS
PART NUMBER
(W x H)
ZDIGHSC100T
68mm x 30mm
ZDIGHSC100
The HSC100 is waterproof (to IPx7) so can be mounted externally
on steel hulled vessels. It also features an automatic calibration
routine to compensate for the effects of nearby magnetic influences.
This involves turning the boat through 1.5 circles at a constant
angular velocity whilst in calibration mode. Once completed, typical
accuracies are within 0.5 degrees.
SPECIFICATIONS
• High Speed (10HZ) NMEA electronic fluxgate compass sensor
• Ideal for use with radar overlay and MARPA target tracking
systems
• Industry standard NMEA 0183 “HDG” output
• Gimballed to 45º
• New “Rate of Turn” version of the HSC100 now released for
Class A transponders (HSC100T)
• 12/24v DC operation with minimal power consumption
• Waterproof to IPx7 and suitable for external mounting on a steel
hulled vessels
• Automatic calibration routine and manual compass offset feature
• Additional AD10 heading output for interface to Furuno systems
• LED Status Indicator
• 15m interconnect cable
SUPPLIED WITH
15m Cable and manual
UPC
030955183688
030955183763
COMPASS
18
INTERFACE
Tel: 978 277 1234 | www.digitalyachtamerica.com | Edition 1 | 2015
PRICE
$ 369.95
NAVIGATION SENSORS
GPS150 DUALNAV™ GPS/GLONASS SENSOR
Typical system
“DualNav technology offers unprecedented positioning accuracy
with GPS and GLONASS compatibility and 10Hz super-fast
NMEA position updates”
KEY FEATURES
The GPS150 DualNav™ positioning sensor combines a super
accurate 50 channel GPS with GLONASS, the Russian funded satellite positioning system that is now on line and providing an excellent
back up or alternative to GPS. This “smart” sensor will automatically
switch between the systems or the user can manually select the most
appropriate for their activity. In DualNav mode, a sophisticated algorithm combines GPS and GLONASS data to offer sub 1m accuracy.
The GPS150 will also be able to utilise the European funded Galileo
positioning system when it comes on line (IOC – Initial Operation
Capability in 2018).
The implementation of GLONASS as an additional satellite positioning system is probably the biggest step change in maritime
navigation since GPS was fully augmented back in the mid 90’s.
Digital Yacht’s GPS150 utilises the industry standard NMEA data
format allowing older chart plotters as well as current generation
products to take advantage of this new technology.
The GPS150 also allows the user to select a variety of different
NMEA baud rates (4800, 38400 and 115200) to allow interfacing with legacy and current systems. It also supports a new
TurboNav™ mode which will appeal to racing yachtsmen and
performance users where GPS/GLONASS data is output at 10Hz
(10 x faster update than normal) and with an interface speed of
115200 baud which is 24 x the speed of normal NMEA data. This
massively improves slow speed navigation data as well as providing the best course and speed data in a dynamic situation.
The GPS150 houses all the electronics in its compact 75mm
antenna and has a single multi core cable for power and data.
Power consumption is just 30mA at 12V. It can be used as a
simple positioning sensor for plotter or VHF DSC systems as well
as a precision, high speed sensor for performance sailing/super
yachts. Setup is easy with a block of simple internal switches
setting the characteristics of the unit. This allows the device to be
programmed in the field without specialist software or programming tools.
The GPS150 can also connect to the WLN10 wireless interface
to allow data to be sent to mobile devices such as iPhones, iPads
and Tablets. There is also a USB interface for PC and MAC users
(ZDIGUSBNMEA).
SPECIFICATIONS
• 50 channel precision GPS/GLONASS positioning sensor
• Just 75mm in diameter and designed to fit industry standard 1”
mounts
• Ultra tough, waterproof construction
• NMEA output configurable for 4800, 38400 and 115200 baud
• Selectable update rates from 1 to 10Hz
• Configurable in the field using simple DIP switches inside the
antenna
• TurboNav mode offers super fast updates to optimise positioning information in slow and high speed applications
• WAAS/EGNOS/SBAS enabled for sub 1m accuracy
• User selectable GPS/GLONASS mode or auto selection
• Ultra low 30mA power consumption (at 12V DC)
• 5-30V DC power input
The installer can set the characteristics of the GPS150
such as mode, NMEA data output and update rate using
a series of simple internal DIP switches - no complicated
software to upload.
Tel: 978 277 1234 | www.digitalyachtamerica.com | Edition 1 | 2015
19
NAVIGATION SENSORS
GPS AND NOW GLONASS
Knowing your position whilst at sea is key to safe navigation. What
we now take for granted, was extremely difficult, time consuming
and inaccurate. Then, in the latter half of the 20th century, came
the electronic positioning systems – Decca, Loran, Transit and in
the 1990s, the global positioning system, GPS. Over 20 years have
passed since the first GPS receivers were commercially available
and in this time the whole world has come to rely on this US funded
technology. Now every boat, plane, car and train that we travel on
has GPS navigation and even your smart phone can give a GPS
position accurate to within 10m, anywhere in the world, at the touch
of a button.
Much political discussion has taken place over our reliance on
GPS technology, to the point where both Europe (Galileo) and
China (Compass) are developing their own satellite based navigation systems, which are scheduled to be fully operational by 2020.
However, whilst GPS was being developed in the 1980s, there was
another competitive system developed in Russia called GLONASS.
This system was very much over shadowed by the American GPS
system and due to the secrecy surrounding the technology and the
difficulties for non-Russian companies to license this technology, it
never achieved wide spread commercial use outside of Russia and
surrounding countries.
During Russia’s difficult financial period between 1989-1999,
government spending on their space program was cut by 80%
and launching of new GLONASS satellites stopped. With relatively
short life spans the GLONASS satellites soon started to fail and by
2001 there were only 6 satellites still operational and the GLONASS
service effectively ceased.
Most observers at the time thought this would be the death of
GLONASS but in 2000, with the Russian economy recovering, President Vladimir Putin took a special interest in GLONASS and made
the restoration of this service a high priority. Between 2002-2011, a
large investment was made and at the end of 2011 GLONASS was
fully restored and now offers worldwide coverage (with 24 operational satellites) and accuracy almost as good as GPS. In areas of
high Latitudes (North and South) GLONASS is more accurate than
GPS due to the orbital position of the satellites.
DUALNAV™ – NEW TECHNOLOGY
Now with the GPS150 DualNav™ technology, boat owners can
have a single sensor that will automatically read satellite data
from both GPS and GLONASS constellations, choosing the best
signals from over 50 satellites. Wherever you are in the world
you now have twice the satellites to choose from resulting in the
GPS150 receiver having much better coverage, time to first fix and
positional accuracy. Add to this the new high sensitivity receiver
design, selectable baud rate and 10Hz position update rate and
you have a GPS receiver that is significantly better than every
previous marine GPS receiver on the market.
The new performance is particularly noticeable if the receiver
is mounted below deck/inside the wheelhouse where the high
sensitivity receiver still gives a good position fix or when there are
obstructions blocking the view of the sky, such as a wet sail shadowing the antenna or when sailing in rivers or close to cliffs, plus
DualNav™ technology with more satellites to choose from, gives a
much more accurate fix.
On larger boats, it is now possible to have two completely separate position sources, not just two GPS units but two different
positioning systems so that you can compare and validate your
actual position. Set one GPS150 to GPS mode and another
GPS150 to GLONASS mode and you have dual redundancy and
two independent positioning systems.
The GPS150 also supports SBAS (Satellite-Based Augmentation
System) which is the generic name given to the differential signal
transmitted by various local geo-stationary satellites. SBAS allows
the GPS150 receiver to remove errors in the position due to environmental conditions and improves accuracy down to <1m. Using
WAAS in the US and EGNOS in Europe the GPS150 will automatically switch to differential SBAS mode when available.
DIMENSIONS
PART NUMBER
SUPPLIED WITH
(D)
UPC
10m cable
75mm
ZDIGGPS150
Supplied with User manual and a
081159830014
INTERFACE
20
GPS
GLONASS
AUTO GNSS
MANUAL GNSS
10Hz UPDATE
TURBONAV
Tel: 978 277 1234 | www.digitalyachtamerica.com | Edition 1 | 2015
PRICE
$ 189.95
NAVIGATION SENSORS
GPS150USB DUALNAV™ GPS/GLONASS SENSOR
Typical system
“DualNav technology offers unprecedented positioning accuracy
with GPS and GLONASS from this USB smart antenna”
KEY FEATURES
The GPS150USB DualNav™ positioning sensor combines a super
accurate 50 channel GPS with GLONASS, the Russian funded satellite positioning system that is now on line and providing an excellent
back up or alternative to GPS. This “smart” sensor will automatically
switch between the systems or the user can manually select the most
appropriate for their activity. In DualNav mode, a sophisticated algorithm combines GPS and GLONASS data to offer sub 1m accuracy.
It’s designed to connect to a PC or MAC (an even LINUX system)
via a USB connection. It also derives power via the USB cable so
it’s completely self contained an ideal for use on charter boats with a
notebook PC charting system. The GPS150USB will also be able to
utilise the European funded Galileo positioning system when it comes
on line (IOC – Initial Operation Capability in 2018). Digital Yacht’s
GPS150USB utilises the industry standard NMEA data format and
the USB connection creates a virtual COM port on the PC or MAC
which is easily usable by all common marine charting programs such
as MaxSea, SmarterTrack, SeaPro, Rosepoint, Nobeltec, Maptech,
Expedition, Imray etc.
The GPS150USB also allows the user to select a variety of different
NMEA baud rates (4800, 38400 and 115200) to allow interfacing
with legacy and current PC systems. It also supports a new TurboNav™ mode which will appeal to racing yachtsmen and performance
users where GPS/GLONASS data is output at 10Hz (10 x faster
update than normal) and with an interface speed of 115200 baud
which is 24 x the speed of normal NMEA data. The GPS150USB
houses all the electronics in its compact 75mm antenna and has
a single 5m USB cable for power and data. Power consumption
is minimal via the USB connection. Setup is easy with a block of
simple internal switches setting the characteristics of the unit. This
allows the device to be programmed in the field without specialist
software or programming tools.
SPECIFICATIONS
• Self-powered via 5m USB cable
• 50 channel precision GPS/GLONASS positioning sensor
• Works with all popular PC/MAC/LINUX charting programs
• Ultra tough, waterproof construction
• NMEA output (via USB) configurable for 4800, 38400 and
115200 baud
• Selectable update rates from 1 to 10Hz
• Configurable in the field using simple DIP switches inside the
antenna
• TurboNav mode offers super fast updates to optimise positioning information in slow and high speed applications
• WAAS/EGNOS/SBAS enabled for sub 1m accuracy
• User selectable GPS/GLONASS mode or auto selection
DIMENSIONS
PART NUMBER
SUPPLIED WITH
(D)
UPC
cable and CD
75mm
ZDIGGPS150USB
Supplied with user manual, 5m
PRICE
$ 269.95
081159830113
GPS
GLONASS
AUTO GNSS
MANUAL GNSS
10Hz UPDATE
TURBONAV
USB
Tel: 978 277 1234 | www.digitalyachtamerica.com | Edition 1 | 2015
21
NOW WITH
SUPPORT
FOR
GOOGLE
ANDROID
NMEA TO WIFI SERVER
WLN10 WIRELESS NMEA SERVER (4800 BAUD)
Typical system
“Create a wifi network on your boat with NMEA data available
for iPhones, iPad or Android tablets — and PCs and MACS too.
Turn you mobile device into a full featured navigator with access
to all your boat’s NMEA data”
KEY FEATURES
This innovative and cost effective wireless device creates its own
802.11b+g wireless access point which any other wireless device
can connect to, such as a Smart Phone, Netbook or Laptop.
Connect it to any device or system that has an NMEA 0183 output
and it will automatically read the data and transmit it wirelessly to
another wireless device. The NMEA 0183 data is transferred using
TCP/UDP protocol to a suitably compatible application on the
wireless device.
A number of Marine Navigation software packages support TCP/
UDP data transfer including;
SmarterTrack (PC)
SeaPro (PC)
Rose Point Coastal Explorer (PC)
MaxSea (PC) and Nobeltec (PC)
MacENC (Macs)
iNavX (iPhone/iPad)
Nav Apps: iSailor and iRegatta
SPECIFICATIONS
• Wireless NMEA Data server (4800 baud)
• Reads NMEA 0183 data and transmits it wirelessly over
802.11b+g
• Can be fitted to any GPS or Instrument system that is outputting/inputting NMEA 0183 data at 4800 baud
• Supports Bi-Directional communication but must be at the
same 4800 baud rate
• Creates an 802.11b+g wireless access point and then transmits
data via TCP/UDP link
• TCP allows single device connection while UDP allows multiple
devices to receive the data
• Fully compatible with popular iNavX navigation application for
Apple mobile devices
• Easy to install IP54 black box solution
EXTRA APPLICATIONS
Visit the App Store to see the range.
DIMENSIONS
PART NUMBER
SUPPLIED WITH
(L x W x D)
UPC
and User Manual
105mm x 72mm x 32mm
ZDIGWLN10
1m Power/Data cable, Wifi Antenna
738435472580
WIRELESS
22
INTERFACE
Tel: 978 277 1234 | www.digitalyachtamerica.com | Edition 1 | 2015
PRICE
$ 299.95
NOW WITH
SUPPORT
FOR
GOOGLE
ANDROID
NMEA TO WIFI SERVER
WLN10HS WIRELESS NMEA SERVER (38400 BAUD)
Typical system
“Create a wifi network on your boat with NMEA data available
for iPhones, iPad or Android tablets — and PCs and MACS too.
Turn you mobile device into a full featured navigator with access
to all your boat’s AIS data — the WLN10HS is preset to 38400
baud for AIS information”
If you are connecting the WLN10HS to an AIS receiver or transponder, then Digital Yacht’s free iAIS app is downloadable from the
Apple App Store, which will display an AIS radar type picture on
your Apple device.
KEY FEATURES
• High Speed Wireless NMEA Data server
• (38400 baud)
• Reads NMEA 0183 data and transmits it wirelessly over
802.11b+g
• Can be fitted to an AIS unit or NMEA Multiplexer that is outputting/inputting NMEA 0183 data at 38400 baud
• Supports Bi-Directional communication but must be at the
same 38400 baud rate
• Free iAIS App for iPhone, iTouch or iPad
• Creates an 802.11b+g wireless access point and then transmits
data via TCP/UDP link
• TCP allows single device connection while UDP allows multiple
devices to receive the data
• Fully compatible with popular iNavX navigation application for
Apple mobile devices
• Easy to install IP54 black box solution
This innovative and cost effective wireless device creates its own
802.11b+g wireless access point which any other wireless device
can connect to, such as a Smart Phone, Netbook or Laptop.
Connect it to any device or system that has an NMEA 0183 output
and it will automatically read the data and transmit it wirelessly to
another wireless device. The NMEA 0183 data is transferred using
TCP/UDP protocol to a suitably compatible application on the
wireless device.
A number of Marine Navigation software packages support TCP/
UDP data transfer including;
SmarterTrack (PC)
SeaPro (PC)
Rose Point Coastal Explorer (PC)
MaxSea (PC) and Nobeltec (PC)
MacENC (Macs)
iNavX (iPhone/iPad)
Nav Apps: iSailor and iRegatta
SPECIFICATIONS
DIMENSIONS
PART NUMBER
SUPPLIED WITH
(L x W x D)
UPC
and User Manual
105mm x 72mm x 32mm
ZDIGWLN10HS
1m Power/Data cable, Wifi Antenna
PRICE
$ 299.95
738435472610
WIRELESS
INTERFACE
Tel: 978 277 1234 | www.digitalyachtamerica.com | Edition 1 | 2015
23
NEW
FOR
2015
NMEA TO WIFI SERVER
NOW WITH
SUPPORT
FOR
GOOGLE
ANDROID
AQUAWEAR WLN20 WIRELESS GATEWAY WITH WRIST CASE
Typical system
“A wireless data gateway to connect smart phones and tablets
system and introduces wearable navigation to the marine market
with its stylish wrist case”
KEY FEATURES
The WLN20 is a wireless NMEA data server with two channel
input. Stream real time NMEA information from your instrument,
GPS and AIS systems to iPhones, smartphones, tablets and PCs.
It ships with an AquaWear wrist case enabling next generation
wearable navigation. Pop your smartphone into the supplied
wrist case and start wearing your nav data on your sleeve. You’ll
benefit from using your accurate boat data and improve battery life
on your smartphone as you’ll not be reliant on its GPS and it will
work below decks.
It’s intuitive, easy and moves with you and of course allows you
to choose from 1000’s apps to suit your app! Digital Yacht have
a range of compatible apps including NavLink and iAIS for iOS
and AISView for Android. What’s more it’s interfaced using open
NMEA 0183 standards so will work with any popular marine electronics system. Even legacy systems can connect bringing the
latest apps to older systems.
iPad or PC/MAC below decks. No connection to the internet is
required as the WLN20 creates a local wifi hotspot on board your
boat. Simply search for the AquaWear wifi network on your device
and connect and allow streaming boat NMEA data to be utilised
by your device. The wireless network will typically footprint a GRP
boat up to 25m in length. For large wooden and steel vessels
please contact us and we can advise on installation techniques to
ensure adequate coverage
SPECIFICATIONS
• Wireless data server for NMEA based systems
• Dual 4800/38400 baud NMEA 0183 inputs
• NMEA output from bi directional wireless interface supports
more app features
• Compatible with 1000s apps
• AquaWear Alliance SDK available for new app developers
• Compatible with UDP and TCP/IP
• Support for up to 7 connected devices (UDP)
• Waterproof, compact and tough
• Ships with AquaWear wrist case – also available as an
accessory
• 12/24v low power operation
• Compatible with 1000s apps for iOS, Android, MAC and PC
It supports multiple devices and operating systems allowing all
your crew to be connected. You can even stream data to a tablet,
DIMENSIONS
PART NUMBER
SUPPLIED WITH
(L x W)
UPC
0.75m power/data cable
160 x 90mm
ZDIGNTN10
Wrist case for 4-5” phones and
081159830311
WIRELESS
24
INTERFACE
WEARABLE
MULTIPLEXER
Tel: 978 277 1234 | www.digitalyachtamerica.com | Edition 1 | 2015
PRICE
$ 349.95
NOW WITH
SUPPORT
FOR
GOOGLE
ANDROID
NMEA TO WIFI SERVER
NAVLINK WIRELESS NMEA2000 SERVER
NAVLINK
Typical system
“Get data from your NMEA2000 network to a iPad, iPhone or
other tablet with the Navlink NMEA2000 wireless server”
KEY FEATURES
With more and more equipment now using NMEA 2000 networking, being able to easily connect the network data to mobile
devices such as smart phones, tablets and laptops is becoming
an important consideration.
The WLN2Net is a simple and cost effective wireless device that
converts NMEA2000 data into a wireless data feed that can be
received by any mobile wireless device. Using standard NMEA
data formats, the WLN2Net is compatible with all software applications that support TCP (single device) or UDP (multiple devices)
data transfer.
A number of Marine Navigation software packages support TCP/
UDP data transfer including;
SmarterTrack (PC)
SeaPro (PC)
Rose Point Coastal Explorer (PC)
MaxSea (PC) and Nobeltec (PC)
MacENC (Macs)
iNavX (iPhone/iPad)
Nav Apps: iSailor and iRegatta
KEY FEATURES
• NMEA 2000 Certified Wireless Data server
• Reads NMEA 2000 data and transmits it wirelessly over
802.11b+g
• Can be fitted to any NMEA 2000 network with integral cable
(male micro connector)
• Supports Bi-Directional communication for driving an Autopilot
• Uses standard NMEA data for maximum compatibility with
software applications
• Creates a wireless access point and then transmits data via
TCP/UDP link
• TCP allows single device connection while UDP allows multiple
devices to receive the data
• Single plug ‘n play connection to the NMEA2000 network,
provides power and data
• Optional USB connection (ZPIEWLN2NETPL) available for
providing NMEA2000 data to the boat’s nav computer
• Fully compatible with popular iNavX navigation application for
Apple mobile devices
• Easy to install IP54 black box solution
DIMENSIONS
PART NUMBER
UPC
PRICE
(L x W x D)
ZDIGWLN2NETPL
030955183848
$ 599.95
105mm x 72mm x 32mm
SUPPLIED WITH
ZDIGWLN2NET
030955183817
$ 549.95
1m Power/Data cable, Wifi Antenna
User Manual and CD
WIRELESS
INTERFACE
INTERFACE
USB
Tel: 978 277 1234 | www.digitalyachtamerica.com | Edition 1 | 2015
25
NEW
FOR
2015
NMEA TO NETWORK SERVER
NTN10 NMEA 0183 TO NETWORK GATEWAY
Typical system
“Overlay NMEA navigation data onto an existing network”
KEY FEATURES
Many large yachts now have an ethernet network installed at the
build stage to allow easy installation of modern IT & communications products. The NTN10 allows NMEA 0183 navigation data to
also be connected to the network, sharing the same cabling and
allowing devices connected to the network to utilise this data.
On larger vessels, there will often be multiple wireless access points
connected to the network and these can then also wirelessly transfer the data to connected devices like iPads and tablets.
SPECIFICATIONS
• NMEA to network server
• Configurable for 4800 or 38400 format NMEA data and also
compatible with MUX100 multiplexer
• UDP or TCP/IP server formats programmable by installer
• Simple RJ45 network connection
• Bi directional interface
• 12/24V installation
The main reason for installing is to get navigation data from the
vessels instruments, AIS or GPS onto the main network. It means
connected devices like iPads or tablets then only have one network
to select which can aggregate internet and navigation network
data. Skippers can then use their iPad for navigation tasks using
the main boat’s data. It also introduces the capability of an internet
connected app for functionality such as live chart updates or
weather overlays.
The NTN10 supports both TCP/IP and UDP data formats for
maximum compatibility and can accept 4800 or 38400 baud NMEA
data.
DIMENSIONS
PART NUMBER
SUPPLIED WITH
(H x W)
UPC
network cable
150 x 244mm
ZDIGNTN10
0.75m NMEA cable, 1m RJ45
081159830359
INTERFACE
26
NETWORK
Tel: 978 277 1234 | www.digitalyachtamerica.com | Edition 1 | 2015
PRICE
$ 350.00
NMEA DATA COMBINER
MUX100 NMEA MULTIPLEXER
4800 baud
38400 baud
4800 baud
38400 baud
“The MUX100 multiplexer combines two channels of NMEA
0183 data and makes NMEA 0183 system integration and
interfacing easy.”
KEY FEATURES
With modern AIS receivers and transponders outputting high
speed NMEA0183 data at 38400 baud, it is often difficult to
connect AIS data and low speed GPS or instrument data at 4800
baud to some chart plotters and/or PCs that have just one NMEA
0183 input. With the MUX100, all data received on the two input
ports is multiplexed and transmitted on output 1 at 38400 baud. It
Is pre-configured so that Input 1 accepts AIS data at 38400 baud
and input 2 accepts GPS/instrument data at 4800 baud.
Typical system
Using intelligent priority switching, the MUX100 gives priority to
input 1 but if GPS data is invalid or lost on input 1, it will automatically switch to input 2. When valid position data is received again
on input 1, it will automatically revert.
Two LEDs on the face of the unit give indication of the data status,
with a solid LED showing which port is currently providing GPS
position and a flashing light on the other port to show that data
is being received. If either LED is not lit of flashing it indicates no
NMEA data present.
SPECIFICATIONS
the AIS present on input 1 and re-transmits this on output 2 at
4800 baud – which can then be connected to the VHF. As a safety
feature, should GPS data on input 1 be invalid or lost, the MUX100
will automatically switch to the GPS data on input 2 and transmit
this on output 1 and output 2. To avoid duplicated data confusing
other equipment, the MUX100 automatically blocks duplicated
data on port 2.
• Dual input/output NMEA0183 multiplexer – simplifies NMEA integration and installation
• Accepts 38400 baud data on input 1 and 4800 baud data on input 2
• Combines all received data and transmits this data on output 1 at
38400 baud
• Extracts the GPS data from the high speed input 1 and re-transmits
at low speed on output 2
• Important safety feature - gives priority to GPS on input 1 but
switches to input 2 if position lost on input 1. Will switch back to
input 1 when valid position fix data is received again
• Easy to install IP54 black box solution
• Opto isolated inputs and true NMEA differential output capable of
driving several devices
DIMENSIONS
PART NUMBER
SUPPLIED WITH
(L x W x D)
UPC
Power/Data cable and User Manual
Often low speed GPS data is required to give position information to a DSC VHF, but when an AIS transponder is fitted the GPS
data is often only available at 38400 baud which will be ignored
by the VHF. The MUX100 intelligently takes the GPS data from
105mm x 72mm x 32mm
ZDIGMUX100
Integral mounting brackets, 0.75m
PRICE
$ 165.00
081159830120
MULTIPLEXER
INTERFACE
Tel: 978 277 1234 | www.digitalyachtamerica.com | Edition 1 | 2015
27
INTERNET ACCESS & WIFI SYSTEMS
WL60 WI-FI BOOSTER
Typical system
KEY FEATURES
Wi-Fi range depends on many local factors, but Digital Yacht has seen
ranges of up to 1 km with this low cost system. In general, using an
internal Wi-Fi adaptor typically found on a notebook, you’ll be lucky
to find the signal at the end of the dock, so if you plan to access the
internet whilst on board, the WL60 could be the solution for you.
Designed for quick and easy installation with four suction cups,
the WL60 is an ideal temporary mount Wi-Fi solution for boats,
caravans, RVs etc.
• New 802.11n 300mW Wi-Fi modem
• High gain (8dBm) omni-directional antenna
• 4 x suction cup mount
• USB bus powered
• Windows XP/Vista/7/8 compatible
• Compatible with Mac OSX, including the latest 64bit Mountain Lion
“Just missing that network connection – the WL60 has a 300mW
modem which allows connection in those remote spots. Ships with
easy USB connection cable and sucker cup mounting solution”
This compact all-in-one system features a 300mW modem built
in to a hi-gain (8dBm) antenna with a 5m (16ft) USB cable. The
antenna measures 60cm (2ft) and should boost your Wi-Fi range
to over 1.0 mile in perfect conditions.
SPECIFICATIONS
The WL60 connects to an on board PC through a regular USB
connection with a plug ‘n’ play driver disk supplied for Windows
XP/Vista/7 and Mac OS X 10.3 (and higher) operating systems. It
supports 802.11b/g/n protocols as well as WEP and WPA/WPA2
encryption. Even if your system already has Wi-Fi access, this can be disabled
and you can take advantage of the superior range (and speed) that
this system will offer.
DIMENSIONS
PART NUMBER
SUPPLIED WITH
(H)
UPC
brackets, 5m USB cable, Driver CD
580mm
ZDIGWL60
030955183824
WIRELESS
28
USB
INTERNET
WINDOWS 8
Mounting Suction Cups, Mounting
and User Manual
LINUX
MAC
Tel: 978 277 1234 | www.digitalyachtamerica.com | Edition 1 | 2015
PRICE
$ 149.95
INTERNET ACCESS & WIFI SYSTEMS
WL450
WL450
POE Adaptor
Typical system
DC in
“Access the internet through the WL450 hi power wifi antenna with
simple network interface and ranges of up to 3NM”
KEY FEATURES
The WL450 is a smart wifi system with all the electronics encapsulated into its rugged 1m omni-directional antenna. It connects to PC
or MAC systems via a simple network connection with power and
data carried to the antenna via a thin ethernet cable. A 10m cable is
supplied as standard with a 20m option also available. The WL450 is
fitted with a standard 1” threaded base so it can mount onto a variety
of deck, pole and rail bases available from many 3rd parties. The
picture here shows it mounted with a 1” adjustable rail mount.
Wifi hotspots are now common in many ports and marinas – many
offer free or very low cost access. However, with the WL450 you’re
not tied to local providers with its extended range capability and far
more reliable operation than using a normal internal wifi card on a
notebook. Once you have wifi access, the web can bring a plethora
of useful information to your boat including TV and entertainment,
media, weather, navigation updates, tracking, electronic charting,
email etc.
With a network interface, there are no complicated drivers or software
to install. Simply enter the IP address of the antenna into any browser
and you can access and adjust all the WL450 features and parameters.
Scan for available hotspots, choose the best and click to connect. The
power output and sensitivity for the system can also be adjusted. The
interface is password protected.
Range is dependent upon many local conditions but reliable distances
of up to 3NM are possible with this system.
The WL450 is also compatible with our iNavConnect and iNavHub
routers allowing the wifi connection to be shared across multiple users.
SPECIFICATIONS
• 1m long smart wifi antenna
• Tough GRP design
• Omni-directional performance
• Ranges up to 3NM
• Easy browser interface
• MAC, Linux and PC ready
• Plug ‘n play LAN network connection
• Single cable for power and data
• Optional router
• Fits standard 1 inch mounts
20m cable option also available
(ZDIGWL450-20)
DIMENSIONS
PART NUMBER
SUPPLIED WITH
PRICE
(H)
ZDIGWL450-20
(POE) DC adaptor and 10m cable
$ 650.00
1000mm
ZDIGWL450
UPC
WL450 antenna, power over ethernet
$ 595.00
(20m cable option)
081159830069
WIRELESS
NETWORK
INTERNET
WINDOWS 8
LINUX
MAC
Tel: 978 277 1234 | www.digitalyachtamerica.com | Edition 1 | 2015
29
INTERNET ACCESS & WIFI SYSTEMS
WL510 HI-POWER WI-FI SYSTEM
Typical system
“Flagship hi power wifi connection system with ranges of
4-6NM. Features network interface for router compatibility and
easy direct connection with browser interface”
KEY FEATURES
The new WL510 allows boat owners to connect to Wi-Fi hot spots
so that their on board PC’s or equipment can connect to the internet. With internet connectivity on board you can download the
latest weather or chart updates as well as having a mobile office
on board. Most harbours and ports have either free or subscription
based services available.
The system has a compact, DC powered below deck mounted
600mW booster/modem and external, hi-gain (12dBm) antenna
with 10m (33ft) low loss LMR400 coax interconnect cable. The
antenna measures 0.9m (2.95ft) and can be supplied with deck,
mast and industry standard 1” x 14TPI mountings. The WL510 modem connects to an on board PC through a
regular RJ45 CAT5 network cable for simple driver free installation.
Connect the WL510 to a router and everyone on board can share
the long range wireless internet connection. Compatible with all
popular operating systems; Windows XP/Vista/7, Mac OS X 10.3
(and higher) and LINUX, the WL510 supports 802.11b/g protocols
as well as WEP/WPA/WPA2 encryption. Wi-Fi range depends on many local factors, but Digital Yacht
has seen ranges of up to 4-6 miles with this low cost system. In
general, using an internal Wi-Fi adaptor typically found on a notebook, you’ll be lucky to find the signal at the end of the dock, so if
you plan to access the internet whilst on board, the WL510 could
be the solution for you.
SPECIFICATIONS
• Ideal solution for permanent installation and new builds
• Network Interface for connection to one PC or to a Router for
shared long range connection
• Easy to setup and control from any browser through web based
interface
• Adjustable (up to 600mW) Wi-Fi modem and high gain (12dBm)
omni-directional antenna gives ERP up to 4W
• Supplied with threaded deck mount for antenna and 10m of low
loss LMR400 coax cable
• Supplied with 1m network cable - can be extended with any
CAT5 network cable (up to 50m)
• Requires connection to boats 12v DC supply • No drivers – works with all popular operating systems; Windows
XP/Vista/7/8, Mac OS X and LINUX compatible
Optional WL510–20 unit available with 20m cable.
DIMENSIONS
PART NUMBER
SUPPLIED WITH
(L x W x H)
UPC
Cable, Antenna, Base Mount and
170mm x 107mm x 55mm
ZDIGWL510
738435472603
Antenna: 895mm (H)
WIRELESS
30
NETWORK
INTERNET
WINDOWS 8
1m network cable, 10m Coax
User Manual
LINUX
MAC
Tel: 978 277 1234 | www.digitalyachtamerica.com | Edition 1 | 2015
PRICE
$ 769.95
SOFTWARE AND APPS
NavLink US
Typical system
iphone / iPad not included.
“Use your iPhone or iPad to explore, plan and navigate your
boating trips in real time and in high resolution using the latest
NOAA digital vector marine charts covering the whole of the
US. Vector charts allow drill down on nav-aid data as well
as seamless, fast panning and zooming across charts. Full
integration with Digital Yacht WLN10, NavLink and iNavHub
products for on board integration. Supports AIS overlays, tidal
data, weather buoys and more.”
KEY FEATURES
NavLink US is a low cost app designed for use with an iPhone or
iPad. It transforms your iPad into a full function chart plotter with
detailed electronic charts and an overlay of your boat’s position,
track and heading. It’s purchased through the Apple app store and
includes detailed NOAA charts covering the whole of the US.
Charts can be presented north up or course up and routes and
waypoints are created and edited using a simple touch screen
interface. Real time navigation shows your current position, track,
course, speed, ETA, VMG, bearing and distance to next waypoint.
There’s a simple A-B chart ruler too and you can tap on an object
such as a buoy or nav-aid and get a pop up data window of its
characteristics. Current weather data and local conditions can be
downloaded from weather buoys (internet connection required)
which is great for last minute local weather before setting off on a
voyage. The latest NOAA charts are vector based so data can be
layered and enabled / disabled by the user allowing charts to be
de-cluttered as appropriate.
It’s also designed to work seamlessly with Digital Yacht’s NMEA
to WiFi devices so will integrate with your boat’s GPS and AIS
systems. If AIS data is available, you’ll see AIS targets overlaid with
all their identity information and a heading line as well as alarms for
CPA and TCPA.
iPad with NavLink app running
Utilising your on board GPS with these wireless servers means you
don’t need a GPS enabled iPad. Even if your device is GPS enabled,
it significantly reduces battery drain when using an external source. It
also means your iPad/Phone can be used below deck and generally,
the boat’s GPS is superior for marine based navigation.
NavLink also helps with your watch keeping and lookouts. In
HorizonView mode, you can use the camera on the iPad to scan the
horizon. You’ll get an overlay on the camera screen of nav-aids, AIS
targets and waypoints which serves as a great visualisation aid.
SPECIFICATIONS
• Supports Digital Yacht WLN10, iNavHub, NavLink and iAIS
products and allows boat’s NMEA data to be utilised on iPad or
iPhone when using this app with these devices
• North up and course up displays
• Real time tracking and track export to Google maps
• AIS overlay when connected to compatible AIS system
• Waypoints and routes with full route editing and planning function
• Position, COG, SOG, VMG, bearing, distance and ETA displays
• Configurable layers: Buoys, lights, depths contours, spot
depths, wrecks, traffic zones, anchorages
• HorizonView - Overlays nav-aid and targets onto iPad/Phone
camera display for easy real time viewing and location
• Automatic free chart updates included for 1 year
• Weather buoy data
• A-B chart ruler for quick and easy bearing and distance
measurement
• All NOAA charts are included in the price
• Tide and sunrise/set displays
• UK version also available (NavLink UK)
Tel: 978 277 1234 | www.digitalyachtamerica.com | Edition 1 | 2015
31
SOFTWARE AND APPS
NavLink US
In navigation view you can see your current
route and active waypoint (indicated with
a star). The data window shows waypoint
bearing and distance, course, ETA and
VMG and the arrow keys allow you to jump
to the next or previous waypoint. Your
position is updated in real time together
with track information which can be toggled
on or off. AIS targets are overlaid when
connected to a compatible AIS system.
NavLink – easy marine navigation for an
iPhone or iPad
AIS target overlay
DIMENSIONS
N/A
Weather buoy data
PART NUMBER
N/A
UPC
Route planning
SUPPLIED WITH
N/A
N/A
IOS
32
Tel: 978 277 1234 | www.digitalyachtamerica.com | Edition 1 | 2015
PRICE
Consult the App Store.
SOFTWARE AND APPS
NavLink MAC
KEY FEATURES
NavLink MAC is an Apple MAC based electronic charting and
navigation package which turns a MacBook into a full function
chart plotter. The application comes complete with highly detailed
NOAA vector charts for the whole of the US and allows real time
positioning, tracking and routing. Simply create a route with a click
of the mouse to quickly and easily get bearing, distance and ETA
information to your destination. AIS targets can also be overlaid
onto the electronic charting. Charts can be zoomed and panned
using intuitive finger gestures on the MAC track pad.
The MAC will require a GPS connection for location and optional
connection to AIS if an AIS overlay of targets is required. Digital
Yacht’s range of GPS sensors or their low cost USB-NMEA adaptor can be utilised to connect the MAC to the boat’s GPS/AIS
system. Alternatively, for a wire free solution, NavLink supports
a connection via wifi to any of Digital Yacht’s NMEA to wireless
devices such as iAIS and the WLN10.
required for this live data) and a tidal atlas is included. NavLink has
been designed from the ground up to take advantage of the MACs
simplicity of operation and clarity of the high resolution displays on
Apple’s latest products.
SPECIFICATIONS
• Detailed vector NOAA charts covering the whole of the US
• GPS and AIS interfaces via USB or WiFi (compatible with Digital
Yacht’s NMEA to wifi devices and NMEA to USB adaptor)
• Superfast screen redraws and intuitive panning and zooming
thanks to the MacBook’s OS
• A-B chart ruler
• Drill down chart information
• Create waypoints and routes and share routes with others
• Export and share routes with the NavLink iOS app
• Weather buoy and tidal data
• Real time GPS tracking
• AIS target overlays with CPA and TCPA alarms
• Chart Printing
The NOAA charts feature incredible detail as they are the official
digitised versions of the US Government charts and show buoys,
navaids, depth contours, wrecks, spot depths, restrictions etc.
It also supports “drill down” data so an object such as a buoy
can be queried for its characteristics. Weather buoys are also
supported for local weather conditions (an internet connection is
DIMENSIONS
N/A
PART NUMBER
N/A
UPC
Typical system
Wi-Fi and or USB
wired connection
SUPPLIED WITH
N/A
PRICE
Consult the Mac App store.
N/A
MAC
Tel: 978 277 1234 | www.digitalyachtamerica.com | Edition 1 | 2015
33
SOFTWARE AND APPS
AISVIEW ANDROID APP
Typical system
Android tablet with AISView connected to
boats NMEA system via WLN10
KEY FEATURES
AISView is the ideal App for anyone wanting to display “live” AIS data
from their boat’s AIS receiver or transponder on their Android tablet
or smart phone. AISView is designed to receive and display wireless
NMEA data from any of Digital Yacht’s NMEA to Wifi devices like the
WLN10, NavLink, iNavHub or iAIS.
Although a “wire free” connection is the easiest way to get data in to
the tablet, if you do not have one of our wireless NMEA products, you
can also connect using Digital Yacht’s USB-NMEA adaptor. Connect
this cable to the NMEA0183 output of your AIS and plug the USB
connector in to a suitable USB OTG cable for your tablet and you have
a simple and cost effective method of getting AIS data in to the tablet
Even if you have a full featured AIS display on your main plotter, having
an extra display on a tablet is useful as a repeater or 2nd display.
Utilising the internal GPS of the Android tablet, you will also have a
completely separate backup system, which should your main plotter
fail, will display your position, all of the AIS targets around you and also
provide anti-collision alarms with CPA and TCPA calculations.
course targets. Google maps can now be cached if you don’t have
an internet connection but even if this feature is not used, AISView will
present an attractive radar like visualisation with range rings overlaying
the targets around your vessel.
AISView also supports a simple bearing and distance ruler, compass
heading display and current position and track history from the
device’s built in GPS. Alarms can be configured for closest point of
approach and AIS SARTs – useful for MOB applications. If you have a
live internet connection, you can also supplement the real time overlay
with AIS information obtained from the popular BoatBeacon internet
AIS app (if this is installed) allowing you to view AIS targets in remote
ports or locations.
SPECIFICATIONS
• AIS viewing app for Android phones and tablets
• Available to purchase in the Google Play store
• Radar like display of AIS targets with range rings and chart grid
Once installed, you’ll see an overlay of AIS target information onto
a background Google map. Tap on a target and you’ll get a drop
down list with identity, heading and closest point of approach (CPA)
information. A heading vector makes it easy to see potential collision
• Background Google mapping if available
• Supports TCP/UDP wireless connection (compatible with
WLN10, NavLink and iAIS)
• Also supports USB connection with driver support for USBNMEA adaptor
• A-B chart ruler
• Alarms for CPA and TCPA
REQUIREMENTS
PART NUMBER
SUPPLIED WITH
Android Smartphone or Tablet with GPS.
A wireless NMEA (TCP or UDP) AIS data
connection or a compatible USB to NMEA
adaptor cable and OTG USB Cable.
UPC
N/A
N/A
N/A
ANDROID
34
Tel: 978 277 1234 | www.digitalyachtamerica.com | Edition 1 | 2015
PRICE
Available on the Google Play store.
Just search for AISView
INTERNET ACCESS & WIFI SYSTEMS
iNAVCONNECT
WIFI ROUTER
iNavConnect acts as a perfect wifi
gateway for Fusion 700 series audio
systems and their iPhone app –
seamless wifi control of your boat’s
stereo system from an iPhone or iPad
“The perfect router for afloat with DC power, slick interface and
support for multiple users. Data transfer and Fusion marine
stereo remote control apps”
KEY FEATURES
iNAVConnect is an all in one solution for setting up a wireless network
on your boat. With direct connection to the boat’s 12v or 24v DC,
higher gain 5dB antenna and a rugged IP54 black box, iNAVConnect
can be easily fitted to any vessel.
iNavConnect also supports the Fusion app allowing a connected
iPhone or iPad to control the Fusion stereo connected to the LAN
on the iNavConnect.
SPECIFICATIONS
• 12/24v DC Powered Wireless Router
• Pre-configured and optimised for connection to Raymarine E
Series network
• Integrates with Digital Yacht’s latest WL510 long range Wi-Fi
Adaptor
• When connected to WL510, will allow the long range internet
connection to be shared with everyone on board
• Creates an 802.11n wireless network onboard with full WEP/
WPA/WPA2 encrypted password protection
• 5dB detachable antenna
• Easy to install IP54 black box solution
Full integration with Digital Yacht’s latest WL510 long range Wi-Fi
adaptor is also possible. Simply plug the WL510 in to the dedicated network socket and when you arrive in port and connect the
WL510 to the marina’s hotspot, everyone on board will be able to
share the long range internet connection.
DIMENSIONS
PART NUMBER
SUPPLIED WITH
(L x W x D)
UPC
Cable, Wifi Antenna and User
244mm x 150mm x 60.5mm
ZDIGINC
030955183640
WIRELESS
1m Power cable, 1m Network
PRICE
$ 249.95
Manual
NETWORK
Tel: 978 277 1234 | www.digitalyachtamerica.com | Edition 1 | 2015
35
INTERNET ACCESS & WIFI SYSTEMS
iNAVHub
WIFI ROUTER AND NMEA WIFI SERVER
Typical system
“Your on board wireless hub with NMEA interface for navigation
systems and WAN interface for internet access devices such
as our WL510. Step on board and connect and you’ll have one
network with all your data”
KEY FEATURES
iNAVHub combines wireless networking and wireless NMEA data
transfer in one simple to install box. Similar to our popular iNavConnect product, it creates a wireless network onboard the boat
that any wireless device can connect to.
Once connected, iPhones, iPads, PCs and Macs, can receive
NMEA0183 data wirelessly for use in iNavX and other navigation apps, whilst also sharing the long range internet connection
created by Digital Yacht’s WL510 product.
iNAVHub is designed to fully integrate with Digital Yacht’s latest
WL510 long range Wi-Fi adaptor. Simply plug the WL510 into
the dedicated network socket and when you arrive in port and
connect the WL510 to the marina’s hotspot, and everyone on
board will be able to share the long range internet connection.
SPECIFICATIONS
• 12/24v DC Powered Wireless Hub
• All-in-one solution for distributing your wireless internet and
NMEA data
• Integrates with Digital Yacht’s latest WL510 long range Wi-Fi
Adaptor
• When connected to WL510, will allow the long range internet
connection to be shared with everyone on board
• Includes an NMEA interface that outputs NMEA0183 data wirelessly to multiple iPhones, iPads, PCs, etc. via UDP
• Creates an 802.11n wireless network onboard with full WEP/
WPA/WPA2 encrypted password protection
• 5dB detachable antenna
• Easy to install IP54 black box solution
EXTRA APPLICATIONS
iNAVHub is the perfect partner to iNavX
DIMENSIONS
PART NUMBER
SUPPLIED WITH
(L x W x D)
UPC
Cable, Wifi Antenna and user
244mm x 150mm x 60.5mm
ZDIGINH
030955183855
WIRELESS
36
NETWORK
1m Power cable, 1m Network
Manual
INTERFACE
Tel: 978 277 1234 | www.digitalyachtamerica.com | Edition 1 | 2015
PRICE
$ 499.95
NOW WITH
WINDOWS
8
MARINE PC SYSTEMS
AQUA 2 STANDARD PC
“Stunning performance from this solid state marine PC – ideal for
charting, monitoring of office applications aboard. Easy navigation
hook up with dual NMEA ports and ultra-low current consumption”
KEY FEATURES
Aqua Standard is designed as a general purpose, great value
on board PC. With two NMEA ports, a 64GB solid state hard
drive, 4 GB of RAM and a CD/DVD RW drive. Standard connections include four USB ports, a VGA and HDMI port allowing the
system to drive up to two compatible LCD monitors and all the
standard system connectors for keyboard, audio and network.
Featuring the latest ultra low power, fanless, Intel Atom N2800
processor (6.5W) the complete Aqua PC system typically
consumes around 12W, but provides all of the PC performance
you need to run your navigation software, e-mail, surf the web etc.
SPECIFICATIONS
• 12v DC powered, ultra rugged marine PC
• Fanless design and solid state hard drive, provide totally silent
and reliable operation
• Compact - measures just 30cm x 27cm x 7cm!
• Ultra low power consumption Intel Atom N2800 processor for
low power consumption and fast computing
• Supplied with Windows 8 home premium operating system (on
UK versions)
• 2 x NMEA Ports and 4 x USB Ports (2xUSB3)
• Easy mounting and installation
• Fitted with CD/DVD RW
• 64GB solid state hard drive
All Aqua PCs are supplied with Windows 8 (32bit) and feature high
efficiency DC-DC converters that allow them to be connected
directly to the boat’s 12v DC supply with no inverter.
The Aqua Standard PC can be supplied with optional built-in
Hi-Power Wi-Fi adaptor or built-in NMEA 2000 gateway.
DIMENSIONS
PART NUMBER
SUPPLIED WITH
(L x W x H)
UPC
mounting brackets, Windows 8 DVD
300mm x 270mm x 70mm
ZDIGAQU200
0.75m Power/IO cable, Bulkhead
PRICE
$ 1199.95
030955183794
DVD
WINDOWS 8
SOLID STATE
DRIVE
USB
INTERFACE
NETWORK
LOW POWER
Tel: 978 277 1234 | www.digitalyachtamerica.com | Edition 1 | 2015
37
NOW WITH
WINDOWS
8
MARINE PC SYSTEMS
AQUANAV 2 PC
SPECIFICATIONS
“With built in AIS and GPS sensors, AquaNav is the
perfect choice for an on board navigation PC”
KEY FEATURES
The AquaNav PC is designed as a powerful marine navigation PC,
with two NMEA ports, a super fast 64GB solid state hard drive,
4 GB of RAM, built-in dual channel AIS receiver, dedicated GPS
Antenna and a CD/DVD RW drive. Standard connections include
four USB ports, a VGA and HDMI port allowing the system to
drive up to two compatible LCD monitors and all the standard
system connectors for keyboard, audio and network.
Featuring the latest ultra-low-power Intel Atom N2800 processor
(6.5W) the complete Aqua PC system typically consumes around
12W but provides all of the PC performance you need to run your
navigation software, e-mail, surf the web, etc.
All Aqua PCs are supplied with Windows 8 (32bit) and feature high
efficiency DC-DC converters that allow them to be connected
directly to the boat’s 12v DC supply with no inverter.
The AquaNav PC can be supplied with an optional built-in
Hi-Power Wi-Fi Adaptor or built-in NMEA 2000 gateway.
• 12v DC powered, ultra rugged marine PC
• Fanless design and solid state hard drive, provide totally silent
and reliable operation
• Built-In dual channel high sensitivity AIS receiver
• Supplied with smart GPS antenna that connects on dedicated
IO cable
• Pre-configured and interfaced so GPS and AIS work straight out
of the box
• Compact - measures just 30cm x 27cm x 7cm
• Ultra low power consumption Intel Atom N2800 processor for
low power consumption and fast computing
• Supplied with Windows 8 home premium 32bit operating
system (on UK versions)
• 2 x NMEA ports and 4 x USB ports (2xUSB3)
• Easy mounting and installation
• Fitted with CD/DVD RW
• 64GB solid state hard drive
DIMENSIONS
PART NUMBER
SUPPLIED WITH
(L x W x H)
UPC
Navigation IO cable, Bulkhead
300mm x 270mm x 70mm
ZDIGAQU200N
PRICE
0.75m Power/IO cable, 0.75m
$ 1599.95
mounting brackets, GPS Smart
030955183800
Antenna, Windows 8 DVD
DVD
38
WINDOWS 8
SOLID STATE
DRIVE
USB
INTERFACE
NETWORK
LOW POWER
GPS
Tel: 978 277 1234 | www.digitalyachtamerica.com | Edition 1 | 2015
AIS
NOW WITH
WINDOWS
8
MARINE PC SYSTEMS
AQUAPRO 2 PC
“Ideal for use with power hungry 3D charting and bathymetric
software. Superfast performance”
KEY FEATURES
The new Aqua range of marine PCs from Digital Yacht bring affordable low power computing to every boat. All models utilise the
latest generation of Intel or AMD processors and a highly efficient
DC power supply to offer exceptionally low power consumption
as well as ultra fast computing capabilities, especially on our latest
AquaPro 2 model, built around the AMD A6-3500 processor.
AquaPro is designed specifically for high speed, demanding 3D
charting and bathymetric applications and has been successfully tested on the latest MaxSea TimeZero technology. It utilises
the latest AMD Fusion APU technology and for exceptional
performance. It’s supplied with 8GB RAM, 6 USB ports (including 2 x USB3.0), Windows 8 (64 bit) as standard and can also be
fitted with an internal 4 port isolated NMEA interface with built in
multiplexing functions.This allows complex NMEA systems to be
integrated into the PC. A 64GB solid state hard drive is supplied as
standard and an 802.11n wireless adaptor for easy networking.
SPECIFICATIONS
• 12/24v DC powered, ultra rugged marine PC
• Latest AMD A6-3500 processor for exceptionally fast
processing speeds
• Integral Radeon HD65XX graphics for fast 3D performance on
MaxSea TimeZero
• 8GB RAM
• Compact - measures just 30cm x 27cm x 7cm
• Low power consumption with remote turn on/reset capability
and auto shut down
• Supplied with Windows 8 64 bit Home Premium operating
system (on UK versions)
• 6 x USB Ports
• Easy mounting and installation
• 64GB solid state hard drive
When not being used for navigation, it also features a DVD/CD
drive, 1080P HDMI output and Dolby 7.1 surround sound for
excellent media playback of DVDs and music.
DIMENSIONS
PART NUMBER
SUPPLIED WITH
(L x W x H)
UPC
brackets, Windows 8 DVD, Driver
300mm x 270mm x 70mm
ZDIGAQU100P
738435472498
DVD
WINDOWS 8
SOLID STATE
DRIVE
USB
0.75m Power, Bulkhead mounting
PRICE
$ 2099.95
CD and User Manual
NETWORK
Tel: 978 277 1234 | www.digitalyachtamerica.com | Edition 1 | 2015
39
NOW WITH
WINDOWS
8
MARINE PC SYSTEMS
AQUA ADAPT PC & INTERFACE OPTIONS
Aqua Adapt PC
Aqua Adapt Navigation Interface
“Powerful modular marine PC system for navigation,
communication and entertainment applications on board”
KEY FEATURES
Aqua Adapt is a new modular PC system designed to optimise PC
integration into onboard navigation, communication and entertainment systems. It’s based around a central PC processor utilising a
powerful Intel i3 core with 8GB RAM and a 64GB solid state drive.
Its fanless design makes for totally silent, super reliable operation. What’s more it only consumes around 20W of power. The
Adapt series is designed to connect direct to the boat’s DC battery
system and operates from 8–19v DC. It ships as standard with
Windows 8 64 bit preloaded and has built in 802.11 b/g/n WIFI
and a wired 1GB network port
Aqua Adapt’s modular approach makes integration easy. The
Adapt Navigation interface incorporates a certified NMEA
2000 interface as well as a dual channel NMEA 0183 interface
(4800/38400 baud) allowing quick and easy integration into
onboard NMEA networks. It’s also fully compatible with our
Navionic’s based SmarterTrack 2015 software so expanding an
on board navigation system and taking advantage of powerful PC
features has never been easier.
Aqua Adapt Communication Interface
incorporates a high power wifi internet access system and is
supplied with 15dBI external wifi antenna and 10m LMR400 cable.
This system add on allows internet access afloat via wifi hotspots
and can offer ranges of up to 5NM depending upon conditions
and the hotspot capability. It connects to the Aqua Adapt processor via a simple RJ45 network connection.
INTERNAL WIFI
The internal wifi card of the Adapt PC can be configured to act as a
server for remote display application such as Splashtop. This allows
a tablet or iPad to act as a wireless remote display for the PC. It
can also act as a wifi router for the Adapt AD30 Communications
interface allowing multiple users to share the internet connection.
BRING OUT NETWORK CONNECTIONS USING
OUR PANEL MOUNT RJ45 CONNECTOR
This neat panel mount connector is
ideal for network connections at the
chart table or even throughout the boat.
It fits quickly and neatly into a 25mm
hole and is ideal for data, network and
voice RJ45 connections. They make
networking a boat with cat 5 cabling a
simple reality.
Also available is the Aqua Adapt Communication interface which
DIMENSIONS
UPC
(L x W x H)
081159830144
170mm x 110mm x 65mm
Adapt Navigation Interface
SUPPLIED WITH
PART NUMBER
PRICE
ZDIGAQUAD20
$ 625.00
ZDIGAQUAD30
$ 825.00
ZDIGAQUAD
Adapt PC
Adapt Communication Interface
081159830168
40
SOLID STATE
DRIVE
$ 1495.00
081159830151
Windows 8 pre loaded
WINDOWS 8
RJ45 panel mount connnector
X500.088
USB
NETWORK
LOW POWER
Tel: 978 277 1234 | www.digitalyachtamerica.com | Edition 1 | 2015
AQUA ADAPT MARINE PC SERIES
NMEA 2000
NMEA 0183
4800 and 38400 baud
Typical system
SPECIFICATIONS
AQUA ADAPT PROCESSOR
• Modular powerful PC system – ideal for on board navigation,
communication and entertainment applications
• Comprises central PC processor with additional modules
incorporating on board interfaces
• Fanless design for excellent reliability
• 8-19v DC input, approx 20W power consumption
• Powerful Intel i3 processor with HD4000 graphics
• 8GB DDR3 1600MHz SO-DIMM memory and super fast 64GB
solid state drive
• Dual HDMI video out for two independent monitors
• Integrated 802.11 B/G/N wifi
• 3 x USB ports
• Windows 8 64 bit operating system
• Just 170mm x 110mm x 65mm
AQUA ADAPT NAVIGATION INTERFACE
• Integrates Aqua Adapt into on board NMEA 2000 systems
• Provides certified NMEA 2000 to Aqua Adapt processor
interface via USB
• Also features dual NMEA 0183 interface (4800 and 38400 baud
compatible) to Aqua Adapt processor
• Fully compatible with SmarterTrack 2015
• 8-19v DC input
AQUA ADAPT COMMUNICATION INTERFACE
• Hi power wifi internet access for the Aqua Adapt
• Connects via supplied LAN network cable
• Supplied with 10m LMR400 antenna cable (20m option)
• Supplied with 1m 15dBi high gain wifi antenna and base
• Offers internet wifi connectivity up to 5NM depending upon
conditions
• 8-19v DC input
Tel: 978 277 1234 | www.digitalyachtamerica.com | Edition 1 | 2015
41
NEW
FOR
2015
MARINE ENTERTAINMENT SYSTEMS
AQUAMEDIA AQM200 ENTERTAINMENT SERVER
Typical system
“A great solution for on board digital entertainment”
KEY FEATURES
AquaMedia is an on-board media server designed to bring the
latest in entertainment technology to your boat. Playback music,
video, pictures or internet TV and integrate with your audio and TV
systems. With a stunning, easy to use interface and blisteringly
fast processor, AquaMedia brings you the best and latest in media
entertainment afloat. Simply step on board and plug in your USB
pen drive or hard disk that contains your audio, video and photo
media for on board playback. AquaMedia will quickly index the
drive and logically arrange the media through its custom operating
system. All your media is then beautifully presented within an easy
to use interface.
It’s super compact, silent and totally solid state and it is powered
direct from the boat’s DC system so there’s no need for inverters.
Connect AquaMedia via HDMI to your choice of TV or display or
via an AUX connection to the boat’s audio system – this allows
your existing stereo and speakers to integrate with the latest digital
entertainment. AquaMedia can support up to two HDMI video
connections with independent resolutions allowing one system to
offer saloon and cabin playback.
built in wifi or through the WL510 high power wifi solution from
Digital Yacht. It has a wired network connection too for integration
with bigger networks. AquaMedia also supports audio playback
via AirPlay on iOS devices like iPhones and iPads. The menu offers
support for up to 4 IP video cameras allowing the TV to offer security, navigation or thermal camera views.
AquaMedia ships with a compact wireless keyboard and trackpad
and is also compatible with FLIRC IR adaptors (available as an
option) so the TV remote can be used as a controller.
SPECIFICATIONS
• Hi performance Intel i3 based processor for exceptionally fast
and easy operation
• Super fast indexing and playback of digital media
• Totally solid state and passively cooled with no moving parts
• 8-19V DC operation
• Dual HDMI video interfaces
• Built in 801.11b/g/n wifi
• Built in BlueTooth 4
• Supports up to 4 IP cameras
• 10/100/1000MB wired network interface
Connect to the internet for web and internet TV functionality via
DIMENSIONS
PART NUMBER
SUPPLIED WITH
(L x W x H)
UPC
Note TV not included
170 x 110mm
ZDIGAQM200
PRICE
RF Keyboard and trackpad
$ 1495.00
081159830328
MP4
SOLID STATE
DRIVE
42
USB
WIRELESS
NETWORK
INTERNET
TELEVISION
AUDIO
MP4
AIRPLAY
Tel: 978 277 1234 | www.digitalyachtamerica.com | Edition 1 | 2015
NETFLIX
MARINE ENTERTAINMENT SYSTEMS
AQUAMEDIA AQM200 ENTERTAINMENT SERVER
MAIN MENU
AquaMedia boots in seconds to an intuitive menu
and allows easy keyboard or remote control
operation
NEWS FEED
Tickertape feed of news at bottom of screen and
Twitter feed at top
MEDIA INDEXING
Bring your audio, video and pictures on any USB
storage device and AquaMedia will index the files
into a logical playback system. Album and cover
artwork are downloaded if an internet connection
is available
RAZOR INTERFACE
Easy operation even in rough seas thanks to
Digital Yacht’s razor interface
VIDEO PLAYBACK
Have unlimited access to music and videos with
a universal USB interface
Tel: 978 277 1234 | www.digitalyachtamerica.com | Edition 1 | 2015
43
MARINE PC SYSTEMS
T112 12" TOUCH SCREEN LCD MONITOR
12" MONITOR
Typical system
Touch screen LCD DC powered monitor for use with PC and
plotter systems
KEY FEATURES
The T112 is a 12” 1024 x 768 pixel touch screen LCD display. It’s
designed for mounting below deck at the chart table or operating
console and supports a VGA and DVI input. By using a resistive
touchscreen (Compatible with Windows XP, Vista, 7 and 8) you can
operate the display with wet hands, gloves, stylus or fingers. Unlike
most 12” displays, it supports a native resolution of 1024 x 768
pixels which is required for optimised e-chart viewing. Brightness is
400cd/nits. It also has a wide viewing angle and is powered directly
from the boats DC supply.
It also has three momentary switches of the front panel which link to
a rear connector. These can be used for remote boot and reset of a
PC or as an AIS transponder silence feature. The T112 is therefore
an ideal navigation monitor. Optimal mounting is flush into a panel
SPECIFICATIONS
• Tough and reliable
• 1024 x 768 pixel resolution, ideal for displaying complex
graphics and high definition images.
• All kinds of touch input devices can be activate the screen,
including fingers, fingernails, styluses, gloved hands, and credit
cards.
• Plug and play compatibility
• Advances OSD (on Screen Display) controls for picture quality
adjustment
• Extra On–Screen buttons to AIS enable easy power control of
the CPU, CPU restart and silencing.
• Offers standard video interfaces for input sources from PC or
multimedia system: VGA–in, DVI
• Panel Mounting, wall mounting and desktop stand options.
but the monitor also has a standard VESA back for mounting onto a
variety of stands or wall brackets.
DIMENSIONS
340 x 260 x 46.5
(W x H x L)
PART NUMBER
ZDIGT112
UPC
SUPPLIED WITH
Supplied with USB touch screen
driver cable, VGA lead
081159830083
TOUCH SCREEN
44
WINDOWS 8
Tel: 978 277 1234 | www.digitalyachtamerica.com | Edition 1 | 2015
PRICE
$ 950.00
MARINE PC SYSTEMS
USB TO NMEA ADAPTOR
Typical system
SPECIFICATIONS
“Get NMEA data into your PC or MAC with this super
stable interface”
KEY FEATURES
The NMEA to USB Adaptor works on PCs, Macs and Linux
computers, and converts NMEA 0183 data, used by many marine
systems, into a USB format that can be plugged into most modern
computers.
The adaptor is a bi-directional device so data can be sent to and
from systems and supports traditional 4800 baud data or the
higher speed 38400 baud rate used by AIS systems. LEDs show
data being received and transmitted which helps with interfacing
issues and all the electronics are encapsulated into the connector.
The device creates a virtual COM port on the PC which navigation
and charting software can use to read NMEA data. Multiple adaptors can be connected if necessary which effectively allow any
number of NMEA ports to be created on your PC.
• Converts NMEA0183 into USB so that your computer can read
the data
• Bidirectional data conversion
• Use with our GPS150 for PC integration
• Low cost simple solution
• More than one adaptor can be fitted to the computer
• 4800, 9600, 38400 and 115200 baud compatible
• Built-in indicator lights flash to show data is being received and
transmitted
• Easy plug and play connection to most computers
• Comes with a driver CD and a free copy of SmarterTrack Lite
AIS software
The device ships with a multi platform driver CD so it can be used
on PCs, MACs and even Linux based systems. If you’re using the
device with an AIS, you’ll get a bonus as SmarterTrack Lite AIS
viewing software is included on the CD - effectively turning your
PC into an AIS target display.
DIMENSIONS
1.8m cable
PART NUMBER
SUPPLIED WITH
ZDIGUSBNMEA
1.8m Cable, Manual and CD
UPC
PRICE
$ 59.95
030955183671
USB
INTERFACE
WINDOWS 8
LINUX
MAC
Tel: 978 277 1234 | www.digitalyachtamerica.com | Edition 1 | 2015
45
SOFTWARE
SMARTERTRACK LITE SOFTWARE
“Supplied free with our AIS systems, this is a great PC viewer
for AIS systems”
KEY FEATURES
SmarterTrack LITE is a simple, but effective graphical AIS display
program for PCs. The data collected by AIS units is meaningless
without some sort of graphical display that shows where the AIS
targets are in the real world, relative to your vessel.
SmarterTrack LITE does just this by plotting all surrounding AIS
targets on a world map or, as you zoom in, on a blank radar type
screen with variable range rings.
SPECIFICATIONS
• Simple graphical AIS display software for PCs
• Plots all detected AIS targets on world map
• Automatically switches to AIS “Radar” type display as you zoom in
• Colour coded AIS Targets with course lines
• Each AIS target shown with user selectable label
• Allows easy programming of Class A Transponder voyage data
• Will display wireless NMEA 0183 data from Digital Yacht’s iAIS,
WLN10 and Boatranet products
• Can be upgraded to full SmarterTrack package
Designed to give customers an immediate taste of what AIS is all
about, SmarterTrack LITE can then be upgraded to the full version
as and when required.
AIS support includes; colour coded targets, user selectable labelling of targets, target course lines and fast AIS Information recovery, making it the ideal introduction to AIS software on the market.
SmarterTrack LITE can be used on any PC running a Windows XP/
Vista/7/8 operating system.
DIMENSIONS
N/A
PART NUMBER
ZDIGSTLTE
UPC
SUPPLIED WITH
Installation CD-ROM and manual
N/A
WINDOWS 8
46
Tel: 978 277 1234 | www.digitalyachtamerica.com | Edition 1 | 2015
PRICE
(Free with all AIS and AquaPC units)
SOFTWARE
SMARTERTRACK 2015 SOFTWARE
Navionics charting
Weather overlay
“Easy to use PC navigation software compatible with Navionics
charts. Powerful features and AIS enhanced displays”
KEY FEATURES
SmarterTrack is the ideal PC navigation software for anyone who
has a dedicated chart plotter that uses Navionics Gold and Platinum
chart cartridges or who is new to electronic charting and wants
simple to use PC navigation software with good AIS support.
Planning at home, monitoring from the chart table or as a self
contained independent backup system, SmarterTrack turns your
PC in to an invaluable navigation tool that will display your GPS
position and the location of all the surrounding AIS targets on the
accurate and detailed Navionics electronic charts.
Sophisticated AIS overlay
contours generated from user supplied local data. SmarterTrack
can also utilise the internal wifi adaptor on Aqua PCs to support
apps like Splashtop which allow remote display mirroring on
iPads and tablets – perfect as a 2nd station display. On this latest
version, Navionic’s charts can be copied to the PC hard drive
allowing charts to be shared between plotter and PC with no
additional costs. Navionic’s charts are widely used by Lowrance,
Raymarine, Simrad, B&G and Humminbird plotters so SmarterTrack makes an ideal partner to an on board plotter.
SPECIFICATIONS
AIS support includes; colour coded targets, user selectable labelling of targets, fully configurable CPA and TCPA alarms, visual indication of CPA, AIS targets drawn to scale and many other other
settings and features that make this software ideal for displaying
AIS data.Entering the route you wish to sail, checking the tides,
overlaying weather (GRIB files), confirming depths or nav-aids on
the chart and a whole host of other routine navigational tasks can
be performed simply and effortlessly with SmarterTrack.
SmarterTrack now also supports Navionic’s Sonar charts which
give highly detailed sub-sea information and additional depth
• Simple yet powerful PC Navigation software
• Supports Navionic’s Gold or Platinum chart cartridges – NOTE
ONLY charting features supported not 3D capability of Platinum
• Now compatible with Navionics Smart Charts
• Excellent AIS support
• Full set of configurable alarms
• Displays tidal height and tidal flow data
• Optimum departure time capability from tidal data
• All route and waypoint data created on SmarterTrack can be
transferred to your dedicated chart plotter
• Displays all NMEA 0183 instrument data
• Allows import of downloaded weather GRIB files
• Will display wireless NMEA 0183 data from Digital Yacht’s iAIS,
WLN10 and Boatranet products
DIMENSIONS
SUPPLIED WITH
N/A
PART NUMBER
ZDIGSTPCN
UPC
installation CD-ROM
PRICE
$ 399.95
738435472566
DVD
NAVIONICS
Tel: 978 277 1234 | www.digitalyachtamerica.com | Edition 1 | 2015
47
NMEA
AWARD
WINNER
BOATraNET
BOATraNET
Typical browser screen shots
“On board wireless web server with custom interface. Puts all
your boat’s data into a web browser on any mobile device with
navigation, charting, documents, media and more”
KEY FEATURES
BOATraNET is a truly unique and innovative product that
“e–enables” your existing navigation system and creates a dynamic,
local intranet for your boat. Imagine having your own automatic
website that shows visitors to your boat, all of the most important
navigational information and gives them access to the photos,
documents and music that you want them to share and enjoy.
BOATraNET integrates with the boat’s existing navigation system
(Raymarine, Garmin, Furuno, Navico, etc.) via NMEA 0183 and
automatically creates animated instrument and navigational
displays (web pages) of your data.
It creates a wireless “hotspot” that works with iPhones, iPads,
iPod Touch, Android Devices, Smart Phones, Laptops, Windows,
LINUX and Mac OS X PCs. Anyone onboard can connect, enter
the password you give them, and then using the wireless device’s
own web browser (no special app required) view the data, even
when out at sea without an internet connection.
BOATraNET is fully expandable and more functions, features and
accessories are planned to be rolled out over the coming months.
Software updates, data and media files can easily be transferred
via USB memory sticks.
SPECIFICATIONS
• World’s first wireless navigation server for boats
• Creates dynamic HTML 5 compliant web pages that can be
accessed by anyone on the boat
• New and exciting method for family and friends to access data
and media whilst onboard
• Can be accessed by any wireless device with a modern browser
– no special apps required
• Works everywhere at sea – no internet connection required
• Optional long range wifi adaptor for shared internet connection
in marinas (WL510)
• 12/24v DC, ultra rugged, fanless hardware that consumes just 1A
• Compact - measures just 29.5cm x 22.5cm x 6.2cm
• 2 x NMEA 0183 Ports
• Easy mounting and installation
• All units include a worldwide Base Map
• Can be supplied with optional Navionics Silver continental chart
coverage of your region
BOATraNET incorporates a Navionics based chart plotter (with
optional embedded Silver Charts), that shows you where you are
on the chart, a music player that can play music on your boat’s
hifi or stream music to your wireless devices, plus photo and
document viewers that you control from your wireless device’s
web browser. Connect BOATraNET to one of Digital Yacht’s long
range wifi adaptors and when you are in the marina, you can easily
connect to the marina’s “hot spot” and share the long range wifi
connection, with everyone connected to BOATraNET.
Continued overleaf
48
Tel: 978 277 1234 | www.digitalyachtamerica.com | Edition 1 | 2015
NMEA
AWARD
WINNER
BOATraNET
Typical system
WIFI
ANTENNA
BOATRANET
VHF
ANTENNA
Chart plotter input
Audio output to stereo
AIS input
Boatranet will function with any
wireless device equipped with
a browser — PC, Mac, iPad,
Android etc
DIMENSIONS
PART NUMBER
UPC
PRICES
(L x W x H)
ZDIGBNET–EU
081159830021
$ 1249.95
ZDIGBNET–US
081159830038
$ 1249.95
ZDIGBNET-CAN
081159830052
$ 1249.95
ZDIGBNET-ROW
081159830045
$ 1249.95
295mm x 225mm x 62mm
ZDIGBNET
SUPPLIED WITH
1m Power/IO cable, Mounting
brackets, Wifi Antenna and User
Manual
WIRELESS
INTERFACE
738435472511
$ 1049.95
INTERNET
Tel: 978 277 1234 | www.digitalyachtamerica.com | Edition 1 | 2015
49
ACCESSORIES
AIS ACCESSORIES AND GPS ANTENNAS
ZDIGCELVG
CEL-VG COMBINATION VHF/GPS ANTENNA WITH SPLITTER
$ 549.95
ZDIGCELCX4A
CEL-CX4A 1.26M GRP HIGH QUALITY AIS VHF ANTENNA
$ 170.00
ZCELE179F
E179F DECK BASE FOR CX4/CEL VG ANTENNAS
$ 60.00
ZCELN280F
N280F ADAPTOR FOR 1” MOUNTS - Allows CX4A and WL510
antenna to fit to standard 1” format deck and rail mounts
$ 60.00
X500.391
MA800 GPS ANTENNA (FITS 1 X 14tpi MOUNT) FOR
AIT250/1000/2000 SERIES TRANSPONDERS
$ 110.00
ZCELR225F
R225F LOW PROFILE GPS ANTENNA WITH 7.5M CABLE
$ 160.00
WL SERIES WIFI ANTENNAS ACCESSORIES
ZDIGWLEXT
POWERED USB EXTENSION CABLE (5M) FOR WL50/400
$ 49.95
X400.073
10M CABLE KIT FOR WL510 (Supplied as standard)
$ 150.00
X400.083
20M CABLE KIT FOR WL510
$ 300.00
ZDIGWL500UP
WL500-510 UPGRADE KIT
$ 499.95
ZCELE179F
E179F DECK BASE FOR CX4/CEL VG ANTENNAS (SUPPLIED AS
STANDARD WITH WL510)
$ 60.00
ZCELN280F
N280F ADAPTOR FOR 1” MOUNTS - Allows CX4A and WL510
antenna to fit to standard 1” format deck and rail mounts
$ 60.00
AQUA PC ACCESSORIES AND UPGRADES
ZDIGKB05
USB WIRED COMPACT KEYBOARD WITH HUB
$ 59.95
ZDIGKB20
USB RF WIRELESS KEYBOARD AND MOUSE
$ 89.95
ZDIGUSBNMEA
USB-NMEA SERIAL ADAPTOR CABLE AND AIS S/W PACK
$ 59.95
ZDIG128UP
128GB SOLID STATE HARD DRIVE UPGRADE FOR AQUA STD/
NAV/PRO (FROM 64GB)
$ 199.95
ZDLIDBT120
BLUETOOTH DONGLE (included with AquaMedia system)
ZDIGN2KM
NMEA 2000 MODULE
$ 299.95
ZDIGNMUP
4 PORT NMEA INTERFACE FOR AQUAPRO
$ 399.95
X500.088
RJ45 PANEL MOUNT CONNECTOR
$ 14.00
WINDOWS 8 PRO
$ 179.95
$ 39.95
WINDOWS UPGRADES
ZDIGWIN8PRO
DIGITAL DEEP SEA PRODUCTS ARE DESIGNED
FOR THE PROFESSIONAL MARKET INCLUDING
COMMERCIAL SHIPPING, FISHING, WORKBOAT,
SUPER YACHT AND NAVAL APPLICATIONS.
THEY’RE BUILT TOUGH FOR A DEMANDING
ENVIRONMENT YET SHARE THE SAME
INNOVATIVE DESIGNS AND GREAT VALUE
OFFERED BY OUR LEISURE PRODUCTS. PRODUCTS
SUCH AS OUR CLA1000 CLASS A AIS AND
OUR AIS SART ALSO CARRY WHEELMARK IMO
COMPLIANCE FOR MANDATED INSTALLATIONS.
OUR AQUA PC PRODUCTS CAN ALSO
FIND A PLACE ABOARD ANY COMMERCIAL
INSTALLATION AND BRING PC BENEFITS TO THE
HIGH SEAS.
SUPERYACHT
WORK BOAT
COMMERCIAL
FISHING
COMMERCIAL
SHIPPING
NAVAL
51
Tel: 978 277 1234 | www.digitalyachtamerica.com | Edition 1 | 2015
AIS SYSTEMS
CLB2000 CLASS B TRANSPONDER
GPS & VHF
ANTENNA
DIPLEXER
Typical system
“Class B AIS transponder for non-mandated vessels. The best
solution for AIS with a combination GPS/VHF antenna”
KEY FEATURES
The CLB2000 uses the latest AIS Transponder technology to
squeeze more performance and interfacing options in to a housing
that is half the size of our previous generation transponder. This
ultra-compact Class B Transponder has three outputs; NMEA
0183, NMEA 2000 and USB connection, allowing it to work with
every AIS compatible chart plotter or software package on the
market today.
Configuration of your vessel’s fixed data, such as MMSI, call
sign, boat name, dimensions etc. is made easy with the included
Windows and Mac compatible proAIS2 software. Once configured, the unit will provide AIS data to a PC or Mac running suitable navigation software or a dedicated chart plotter, such as the
latest Garmin, Raymarine, Navico and Furuno units.
The CLB2000 is supplied with an easy to install combination
VHF+GPS antenna, that allows one RG58 cable to connect the
1.1m Antenna to the CLB2000, via a splitter that connects directly
in to the CLB2000.
As well as transmitting your own vessel’s position so that other AIS
equipped vessels know where you are, the CLB2000, will receive
all AIS targets within range of your boat – typically up to 30NM
Featuring a remote silence button option, two NMEA 0183 Inputs
and Outputs, four status LEDs and rugged vibration-proof mounting brackets, the CLB2000 is the perfect AIS transponder solution
for all commercial vessels up to 300 tonnes that are not mandated
to fit a Class A.
SPECIFICATIONS
• Latest generation AIS technology – featuring a brand new AIS
transponder (Class B) design
• 12v and 24v Operation
• Ideal for use with existing plotter and radar systems
• Built-in high performance 50 channel GPS receiver (ideal also as
a backup GPS)
• USB Interface for simple plug and play connection to a PC or
Mac
• High speed NMEA output (38,400 baud) – compatible with
industry standard plotters
• Supplied with a 1.1m ultra slim, combination VHF+GPS antenna
complete with deck mounting and splitter box with connecting
cables to CLB2000 – requires RG214 cable between Antenna
and Splitter
• Remote silence function
• Supplied with programming software for user programming
• Easy to install black box solution with integral mounting brackets
The CLB2000 can also be supplied without the combination GPS-VHF antenna but with
a GPS standard antenna. Price is the same as the AIT2000.
DIMENSIONS
PART NUMBER
SUPPLIED WITH
(L x W x D)
UPC
USB cable, 0.75m N2Net cable,
150mm x 155mm x 37.5mm
ZDIGCLB2000
AIS
USB
INTERFACE
$ 1259.95
Combo GPS/VHF Antenna+Splitter
030955183725
TRANSMITTER
PRICE
0.75m Power/Data cable, 0.75m
INTERFACE
INTERFACE
MULTIPLEXER
GPS
WINDOWS 8
52
Tel: 978 277 1234 | www.digitalyachtamerica.com | Edition 1 | 2015
LINUX
MAC
AIS SYSTEMS
CLA1000 CLASS A TRANSPONDER
VHF
ANTENNA
BREAKOUT BOX
Typical system
“Fully IMO approved, Class A AIS transponder for certified
installation on vessels over 300 GRT”
KEY FEATURES
The CLA1000 from Digital Deep Sea is a fully approved, Class A
transponder that meets all IMO requirements. Built to the most
demanding of standards, the CLA1000 is MED Wheel Marked and
comes with a global 2 year warranty.
Normally fitted to larger vessels that are mandated to fit a Class
A Transponder due to their size or number of passengers, many
smaller non-mandated vessels can also benefit from fitting a Class
A transponder. With 12W transmit power, compared to 2W for
Class B, many off shore sail boats will benefit from being visible at
greater ranges, whilst the faster (up to every 2 seconds) update
rate of the Class A transmissions, compared to every 30 seconds
with Class B, will definitely benefit larger power boats that can go
a long distance in 30 seconds.
Hitting a new price point for Class A Transponders, the CLA1000
is now a realistic consideration for non-mandated vessels that
would benefit from fitting a Class A transponder but could not
justify the previously high price of this type of device.
SPECIFICATIONS
• Fully approved and MED Wheel Marked Class A Transponder
• Ultra Compact Design
• Easy soft key and rotary encoder operation
• Built-in GPS with easy to fit 1” x 14tpi mount GPS antenna
• Pilot Plug for easy PC connection
• Remote break out box for on-board interfacing
• Supplied with configuration software and SmarterTrack Lite
AIS software
Two other important benefits of Class A Transponders are that they
take priority over Class B transponders in areas of high AIS traffic
(transmission slot allocation is guaranteed for Class A transponders) and they are always displayed on other Class A transponders
and ECDIS systems on board large commercial vessels. DIMENSIONS
PART NUMBER
SUPPLIED WITH
(W x H x D)
UPC
trunnion bracket, flush mount kit,
195mm x 105mm x 157mm
ZDIGCLA
738435472573
TRANSMITTER
AIS
USB
INTERFACE
GPS Antenna, breakout box,
PRICE
$ 2799.95
power lead and manual
MULTIPLEXER
GPS
IMO APPROVED
53
Tel: 978 277 1234 | www.digitalyachtamerica.com | Edition 1 | 2015
AIS SYSTEMS
PILOTLINK CLASS A AIS WI-FI INTERFACE
Typical system
“Connects to the pilot plug interface so iPad, iPhones and other
tablets can share the AIS data via a wifi link”
KEY FEATURES
PilotLINK is a wireless interface for Class A AIS systems. All Class
A transponders share a common “Pilot Plug” connector that PilotLINK connects directly to via a 1m cable. PilotLINK then creates a
wifi navigation network on board the vessel which allows AIS and
GPS data from the Class A to be sent directly to any connected
mobile devices such as phones or tablets. It’s compatible with iOS
and Android systems (depending upon app utilised) as well as PC
& MAC based systems.
PilotLINK is stand alone and can operate from its internal, user
replaceable, dry battery (PP3) for up to 15 hours. Alternatively, it
can connect via a standard mini USB connector to any USB style
power pack or AC/DC USB power adaptor that are readily available from many 3rd parties.
PilotLINK is compatible with a wide variety of apps and PC
programs. iAIS is a free of charge app from Digital DeepSea which
gives a basic AIS radar type display and target information. It’s
also compatible with iSailor and iNavX - both popular charting/
AIS products and many other 3rd party apps available through the
Apple App store or Google Play on Android.
PilotLINK can also interface with a PC or MAC. Popular navigation
programs such as SmarterTrack, SeaPro, RosePoint and MaxSea
for PCs or macENC for a Mac are all compatible. PilotLINK ships
with a complimentary copy of SmarterTrack Lite - a full featured
AIS display program for Windows PCs.
SPECIFICATIONS
• Wireless Interface for Class A AIS Transponders
• Reads GPS and AIS data directly from the transponders Pilot Plug
• Supports bi-directional communication for configuring the
transponder
• Uses standard NMEA data for maximum compatibility with software applications
• Free iAIS App for iPhone, iTouch or iPad
• Complimentary copy of SmarterTrack Lite for PCs
• Creates a wireless access point with a typical range of 30m
• Transmits data via TCP/UDP link
• TCP allows single device connection while UDP allows multiple
devices to receive the data
• Fully compatible with many popular Apps and software programs
• Rugged handheld design can be fitted with optional rubber jacket
• Powered from internal 9v PP3 battery or optional external USB
power source
DIMENSIONS
PART NUMBER
SUPPLIED WITH
(L x W x D)
UPC
and CD
117mm x 70mm x 25mm
ZDIGPLINK
1m Pilot Plug cable, User Manual
081159829988
AIS
INTERFACE
WIRELESS
54
Tel: 978 277 1234 | www.digitalyachtamerica.com | Edition 1 | 2015
PRICE
$ 319.95
AIS SYSTEMS
S1000 AIS SMART SART
VHF
ANTENNA
LIFE GUARD
Typical system
“IMO Compliant AIS SART with the latest technology,
performance and great value”
shows as a SART target on any AIS system and a safety message
(SART ACTIVE) is sent every 4 minutes.
KEY FEATURES
The S1000 SART also offers considerable safety benefits for
leisure users and should be part of any safety pack for coastal or
ocean sailing.
A SART (Search and rescue transponder) is a mandatory fit for live
saving apparatus on all vessels over 300GRT. Traditional technology used a radar type device, but new legislation allows an AIS
SART to be used with associated performance and cost benefits.
AIS SARTs positively identify the casualty and give a regular position update which can be graphically displayed on a Class A MKD,
ECDIS or plotter.
The S1000 is a fully IMO compliant and approved AIS SART (Wheel
Marked) which once activated, will display a target on any Class A
or B transponder system or on an AIS receiver. As such it greatly
aids recovery of the casualty or liferaft. SART alarms like our AIS
Lifeguard are also activated by the signal from these devices.
SPECIFICATIONS
• Full IMO Compliant, Wheel Marked AIS SART
• 50 channel GPS receiver built in
• Specialist VHF antenna technology for superior performance
• LED indications for test and activation
• When activated transmits position 8 times per minute
• 96 hour battery life
• Sends SART ACTIVE safety message every 4 minutes
• Easy to change, low cost battery replacement
The S1000 utilises specialist VHF antenna technology to offer
exceptional range (typically up to 10NM) and has a battery life
of 96 hours under operation. It comes with a storage bag and
bracket mount and has a 1m telescopic pole integrated so it can
be used in a liferaft. The integrated 50 channel GPS offers a very
fast time to first fix (typically under 40 seconds) and thereafter
position information is transmitted 8 times per minute. The SART
DIMENSIONS
PART NUMBER
SUPPLIED WITH
(H x D)
UPC
U Bolts, 10m buoyant lanyard, 1m
381mm x 67mm
ZDIGS1000
081159829995
AIS
Supplied with mounting bracket,
PRICE
$ 695.00
pole mount and storage bag
SAFETY
55
Tel: 978 277 1234 | www.digitalyachtamerica.com | Edition 1 | 2015
AIS SYSTEMS
PILOT PLUG USB CABLE
Typical system
“Easy PC connections from a Class A AIS to a PC or MAC”
KEY FEATURES
All AIS Class A Transponders have a special “Pilot Plug” that
is intended to allow a Commercial Pilot to quickly and reliably
connect their laptop PC to the Class A Transponder when they
arrive onboard.
The Digital Deep Sea Pilot Plug Cable, allows anyone to connect
their PC to a Class A Transponder and receive NMEA0183 AIS
and GPS data via a USB port. With some models of Class A
transponders, this cable can also be used to configure the Class A
with static AIS data and/or the mandatory voyage data that should
always be programmed in to a Class A transponder before starting
a passage.
The NMEA to USB Adaptor works on PCs, Macs and Linux
computers, and converts NMEA 0183 data, used by many marine
systems, into a USB format that can be plugged into most modern
computers.
navigation and charting software can use to read NMEA data. The
device ships with a multi platform driver CD so it can be used on
PCs, MACs and even Linux based systems. If you’re using the
device with a Windows PC, you’ll get a bonus as SmarterTrack
Lite AIS viewing software is included on the CD - effectively turning
your PC into an AIS target display.
SPECIFICATIONS
• 1.8m Cable
• Fully NMEA 0183 compatible (differential RS422)
• Conforms to the IMO SN/Circ.227
• Bidirectional data connection
• Low cost simple solution
• Built-in indicator lights flash to show data is being received and
transmitted
• Easy plug and play connection to most computers (Windows/
Mac/LINUX)
• Comes with a driver CD and a free copy of SmarterTrack Lite
AIS software
The adaptor is a bi-directional device so data can be sent to and from
systems and has integral LEDs that flash as data is being received
(green) and transmitted (red) which helps with interfacing issues.
The Pilot Plug Cable creates a virtual COM port on the PC which
DIMENSIONS
1.8m cable
PART NUMBER
SUPPLIED WITH
ZDIGPPL
1.8m Cable, Manual and CD
UPC
030955183749
AIS
USB
WINDOWS 8
LINUX
MAC
56
Tel: 978 277 1234 | www.digitalyachtamerica.com | Edition 1 | 2015
PRICE
$ 160.00
AIS SYSTEMS
CLASS A PC PILOT PLUG EXTENSION CABLE
KEY FEATURES
All AIS Class A Transponders have a special “Pilot Plug” that
is intended to allow a Commercial Pilot to quickly and reliably
connect their laptop PC to the Class A Transponder when they
arrive onboard.
SPECIFICATIONS
• 10m Cable
• Conforms to the IMO SN/Circ.227
• Can be used to extend any Pilot Plug
• Allows you to extend the cable without increasing the USB
cable length which is limited to 5m
Often on larger vessels the normal 1-2m length of the Pilot Plug
can make connecting to the vessels Class A transponder difficult.
As most Pilot Plug cables use a USB interface, which is limited to
5m, extending the cable can be problematic.
The Digital Yacht extension cable, extends the NMEA0183 wiring
and not the USB wiring making it possible to extend up to 10m (or
more) plus the length of the existing Pilot Plug cable.
DIMENSIONS
10m cable
PART NUMBER
ZDIGPPLEXT
UPC
SUPPLIED WITH
N/A
PRICE
$ 140.00
081159830182
AIS
57
Tel: 978 277 1234 | www.digitalyachtamerica.com | Edition 1 | 2015
AIS SYSTEMS
DigAtoN
Optional
GPS sensor
Other sensors
and monitoring
equipment (Optional)
USB connection for
programming
Typical system
KEY FEATURES
DigAtoN AIS AtoNs fit to marine structures, hazards, buoys or can
be configured to represent a virtual or synthetic point if mounted
remotely from a physical location. AIS equipped vessels and shore
stations can then not only identify the position of these marks but
also read data (such as weather and instruments) collected by the
AtoN. The DigAtoN is available as a Class 1 device (transmit only)
or a Class 3 device (transmit and receive). Class 1 devices require a
local AIS base station to be operating in the same area as the AtoN
whereas Class 3 devices can internally allocate slots for transmission allowing them to be placed anywhere. Class 3 devices can
also be configured and queried remotely and wirelessly “chained”
together for extended range configuration. DigAtoN products are
also available with an additional sensor interface installed to allow
extended monitoring and digital switching capability.
• Virtual and synthetic capability (up to 5)
• Adjustable transmit power (1 to 12.5W)
• Highly configurable for all AtoN applications with full range of
interface solutions from Digital DeepSea
• Additional S models feature extended I/O capability –
• Current sense
• Three non-isolated analogue inputs and two isolated
analogue inputs
• 5 isolated digital I/Os and 5 non-isolated digital I/Os
• Two RS232 ports and a fully isolated RS422/NMEA port
• Two relay drive outputs
• SDI-12 serial bus
• Input voltage monitor (no external connection required)
SPECIFICATIONS
• Marking offshore structures, wind farms, wrecks, points of interest or danger areas
• Transfer of local meteorological conditions such as wind, pressure, wave height. Custom data transmission to base stations
such as electrical status, tide, current, salinity etc measurements
and localised tide and current information
• Use virtual or synthetic AtoN capability to mark 5 virtual points
(ideal for yacht club racing or movable marks)
• Available as a Class 1 or Class 3 device
• Ultra tough and waterproof to IPX7
• Approved for global use
• Internal GPS sensor and antenna with external antenna
option available with best in class power consumption
(important for self powered structures)
• Class 3 devices support chaining and remote (VDL) configuration and monitoring
APPLICATIONS
DESCRIPTION
PART NUMBER
UPC
PRICES
ATN1000S CLASS 1 ATON WITH SENSOR INTERFACE
ZDIGATN1000S
081159830274
$ 5500.00
ATN3000 CLASS 3 ATON
ZDIGATN3000
081159830281
$ 6500.00
ATN3000S CLASS 3 ATON WITH SENSOR INTERFACE
ZDIGATN3000S
081159830298
$ 6900.00
ATN1000 CLASS 1 ATON
AIS
USB
ZDIGATN1000
INTERFACE
ATON CLASS 1
ATON CLASS 3
LOW POWER
58
Tel: 978 277 1234 | www.digitalyachtamerica.com | Edition 1 | 2015
081159830267
$ 5100.00
AIS SYSTEMS
AIS AtoN application
AtoN chaining
Virtual AtoN
SUPPLIED WITH
ZDIGATN1000
AIS DigAtoN Transceiver
ZDIGATN1000S
AIS DigAtoN Transceiver
ZDIGATN3000
Mounting bracket and fixings
ZDIGATN3000S
DIMENSIONS
Mounting bracket and fixings
235mm x188mm
Bird deterrent components
Bird deterrent components
(H x W)
Product manual and CD
Product manual and CD
USB configuration cable
USB configuration cable
387mm x 188mm
Power and data cable
Power and data cable Sensor
(H x W)
Interface cables
59
Tel: 978 277 1234 | www.digitalyachtamerica.com | Edition 1 | 2015
Tel: 978 277 1234
www.digitalyachtamerica.com
Edition 1 | 2015
Suite 1702
265 Franklin St
Boston
MA02110
Designed and manufactured in
60
Follow
our daily
news feed at www.digitalyacht.net
Tel: 978 277
1234
| www.digitalyachtamerica.com
| Edition 1 | 2015
Download PDF
Similar pages
Raymarine A50, A50D, A57D, A70, A70D
AIS Engine 2
N560/NF560/F560
AIS250 RECEIVER AND AIS500 TRANSCEIVER
AIS B Spec Sheet_1008.indd
Tech 00016-2011 AIS to Raymarine C Series