User Manual - Pdfstream.manualsonline.com

LED TV
user manual
Contact SAMSUNG WORLDWIDE
If you have any questions or comments relating to Samsung
products, please contact the SAMSUNG customer care center.
Figures and illustrations in this User Manual are provided for reference
only and may differ from actual product appearance. Product design and
specifications may be changed without notice.
Still image warning
Avoid displaying still images (such as jpeg picture files) or still image elements
(such as TV channel logos, panorama or 4:3 image format, stock or news bars
at screen bottom etc.) on the screen. Constant displaying of still pictures can
cause ghosting of LED screen, which will affect image quality. To reduce risk of
this effect, please follow below recommendations:
• Avoid displaying the same TV channel for long periods.
• Always try to display any image on full screen, use TV set picture format
menu for best possible match.
• Reduce brightness and contrast values to minimum required to achieve
desired picture quality, exceeded values may speed up the burnout process.
• Frequently use all TV features designed to reduce image retention and screen
burnout, refer to proper user manual section for details.
Country
Customer Care Center 
Web Site
MEXICO
01-800-SAMSUNG(726-7864)
www.samsung.com
ARGENTINA
0800-333-3733
www.samsung.com
BRAZIL
0800-124-421
4004-0000
www.samsung.com
CHILE
800-SAMSUNG(726-7864)
www.samsung.com
COLOMBIA
01-8000112112
www.samsung.com
COSTA RICA
0-800-507-7267
www.samsung.com
DOMINICA
1-800-751-2676
www.samsung.com
ECUADOR
1-800-10-7267
www.samsung.com
Securing the Installation Space
EL SALVADOR
800-6225
www.samsung.com
Keep the required distances between the product and other objects (e.g. walls)
to ensure proper ventilation.
Failing to do so may result in fire or a problem with the product due to an
increase in the internal temperature of the product.
GUATEMALA
1-800-299-0013
www.samsung.com
HONDURAS
800-7919267
www.samsung.com
JAMAICA
1-800-234-7267
www.samsung.com
✎✎ When using a stand or wall-mount, use parts provided by Samsung
NICARAGUA
00-1800-5077267
www.samsung.com
PANAMA
800-7267
www.samsung.com
PERU
0-800-777-08
www.samsung.com
PUERTO RICO
1-800-682-3180
www.samsung.com
TRINIDAD & TOBAGO
1-800-SAMSUNG(726-7864)
www.samsung.com
VENEZUELA
0-800-100-5303
www.samsung.com
Electronics only.
xxIf you use parts provided by another manufacturer, it may result in a
problem with the product or an injury due to the product falling.
✎✎ The appearance may differ depending on the product.
✎✎ Be careful when you contact the TV because some parts can be
somewhat hot.
Installation with a stand.
Installation with a wall-mount.
4inches
(MEXICO Only)
4inches
4inches
4inches
4inches
4inches
4inches
BN68-04499D-00
BN68-04499D
-1-
IMPORTADO POR: SAMSUNG ELECTRONICS MÉXICO S.A. de C.V.
AV. PRESIDENTE MASARIK #111 INT701
COL. CHAPULTEPEC MORALES C.P.11570
DELEGACION MIGUEL HIDALGO MEXICO. DISTRITO FEDERAL
Tel: 01-55-5747-5100 / 01-800-726-7864
✎✎ When selecting the function by moving the controller to the up/down/left/
Getting Started
right directions, be sure not to press the controller. If you press it first, you
cannot operate it to move the up/down/left/right directions.
Accessories
Plug & Play (Initial Setup)
• Remote Control & Batteries (AAA x 2)
• Warranty Card / Safety Guide
• Wire-Holder Stand
When you turn the TV on for the first time, a sequence of on-screen
prompts will assist in configuring basic settings. Press the POWER
button. Plug & Play is available only when the Input source is set to
TV.
• Owner’s Instructions
• Power Cord
Input Cables (Sold Separately)
•
•
•
•
RS232
Audio
HDMI
HDMI-DVI
✎✎ Connecting the power cord and antenna. (refer to
‘Connections’)
• Component
• Composite (AV)
• Coaxial (RF)
Selecting a language
✎✎ Check the cable before plug-in
Select the desired OSD (On Screen
Display) language.
Plug & Play
Cable
Select Language of the OSD.
Ports
English
Español
Français

Language
HDMI
U Move
E Enter


USB
Optical

Selecting a Home Use mode
Plug & Play
Select ‘Home Use’ when installing this TV in your home.
Do not plug cable upside down.
Be sure to check before plug-in.
Store Demo
TV Controller (Panel Key)
Home Use

L Move
E Enter


Function menu
MEDIA.P
m
• Select the Home Use mode. Store
Demo mode is for retail environments.
• When pressing TV controller, the
function menu screen appears. Select
the MENU(m) and press it more than 5
seconds using the controller. The Store
Demo mode is set. Cancel the Store
Demo by selecting Source List(s)
and pressing it more than 5 seconds.

Selecting an antenna
R
P
In Cable mode, you can select the correct
signal source among STD, HRC, and IRC
by pressing the ▲, ▼, ◄ or ► button.
Plug & Play
Select the Antenna source to memorize.
Return
TV Controller
Air
Start
Cable
Start
Auto
Start


U Move
E Enter

m Skip

Setting the Clock Mode
Remote control sensor
Power on
Turns the TV on by pressing the controller in standby mode.
Adjusting the volume
Adjusts the volume by moving the controller from side to
side when the power is on.
Selecting a channel
Selects a channel by moving the controller up and down
when the power is on.
Using the function menu
Press the controller when the power is on, then the function
menu screen appears. If you press it again, the function
menu screen disappears.
Selecting the Media Play
Selects the MEDIA.P by moving the controller in the
function menu screen. The Media Play main screen
appears.
Selecting the MENU (m)
Selects the MENU(m) by moving the controller in the
function menu screen. The OSD(On Screen Display) of your
TV’s feature appears.
Selecting the Source
List (s)
Selects the Source List (s) by moving the controller in the
function menu screen. The Source List screen appears.
Power Off (P)
Selects the Power Off (P) to turn the TV off by moving the
controller in the function menu screen.
Set the Clock Mode automatically or
manually.
Plug & Play
Set the Clock Mode.
Clock Mode


: Auto
E Enter
m Skip
• If you select the Auto, set the
DST(Daylight Saving Time).
• On the DST screen, press ENTERE,
then select whether to turn DST
(Daylight Savings Time) on or off. Select
the time zone where you live.

Viewing the HD Connection Guide
The connection method for the best HD screen quality is displayed.

Enjoy your TV.
Press the ENTERE button.
✎✎ Exits the menu when pressing the controller more than 1 second.
-2-
Connections
yy For better picture and audio quality, connect to a digital device using an HDMI cable.
yy PC(D-Sub) and PC/DVI AUDIO IN input are not supported.
yy The picture may not display normally (if at all) or the audio may not work if an external
device that uses an older version of HDMI mode is connected to the TV. If such a problem
occurs, ask the manufacturer of the external device about the HDMI version and, if out of
date, request an upgrade.
yy For HDMI/DVI cable connection, you must use the HDMI IN 1(DVI) jack.
yy Be sure to purchase a certified HDMI cable. Otherwise, the picture may not display or a
connection error may occur.
yy EX-LINK: Connector for service only.
yy Connecting through the HDMI cable may not be supported depending on the PC.
yy If an HDMI to DVI cable is connected to the HDMI IN 1(DVI) port, the audio does not work.
AV Device (1)
Using a HDMI Cable (up to 1080p)
yy The side panel may differ depending on the model.
HDMI OUT
Power Input
Blu-ray player / DVD / cable box /
sat box
TV Side Panel
DVI OUT
Audio Device (1)
TV Rear Panel
HDMI OUT
Using an Audio (Analog) Cable
R
AUDIO IN
W
PC
R-AUDIO-L
DVD / Home Theater
PC
Using a HDMI (to DVI) Cable
VHF/UHF Antenna
Media Play
R
W
Y
R
R
W
R
B
R
W
R
B
or
G
R
ANT OUT
Using a USB Drive
Cable
W
Y
AV Device (2)
Using an Audio/Video
AUDIO OUT
VIDEO OUT
R-AUDIO-L
G
R
R
AV Device (3)
Using a Component Cable
(up to 1080p)
AUDIO OUT
R-AUDIO-L
Audio Device (2)
Using an Optical (Digital) Cable
COMPONENT OUT
PR
PB
OPTICAL
Y
Digital Audio System
VCR
Blu-ray player
■■VCR / DVD / Cable STB / Satellite STB / PVR STB / AV
Receiver / Game / Camcorder / PC / DVI PC / DVI / TV / IPTV
/ Blu-ray / HD DVD / DMA: Name the device connected to the
input jacks to make your input source selection easier.
✎✎ When connecting a PC to the HDMI IN 1(DVI) port with HDMI
cable, you should set the TV to PC mode under Edit Name.
Changing the Input Source
Source List
Use to select TV or an external input source such as a DVD player /
Blu-ray player / cable box / STB satellite receiver.
✎✎ When connecting a PC to the HDMI IN 1(DVI) port with HDMI
1. Press the SOURCE button.
to DVI cable, you should set the TV to DVI PC mode under Edit
Name.
2. Select a desired external input source.
■■TV / AV / Component / HDMI1/DVI / HDMI2
✎✎ You can only choose external devices that are connected to the
TV. In the Source List, connected inputs will be highlighted.
How to use Edit Name
Edit Name lets you associate a device name to an input source. To
access Edit Name, press the TOOLS button in Source List. The
following selections appear under Edit Name:
✎✎ When connecting an AV devices to the HDMI IN 1(DVI) port
with HDMI to DVI cable, you should set the TV to DVI mode
under Edit Name.
Information
You can see detailed information about the connected external
device.
-3-
Remote Control
✎✎ This remote control has Braille points on the Power, Channel, and Volume buttons and can be used by visually impaired persons.
Displays and selects the available video
sources.
Turns the TV on and off.
Turns the remote control light on or off. When
on, the buttons become illuminated for a
moment when pressed. (Using the remote
control with this button set to On will reduce
the battery usage time.)
Press to directly access to channels.
Press to select additional channels (digital) being
broadcasted by the same station. For example,
to select channel ‘54-3’, press ‘54’, then press
‘-’ and ‘3’.
Returns to the previous channel.
Cuts off the sound temporarily.
Adjusts the volume.
Changes channels.
Displays the channel list on the screen.
Displays the main on-screen menu.
MEDIA.P
Views the Media Play.
SLEEP
Quickly select frequently used functions.
utomatically shuts off the TV at a preset
A
time.
Displays information on the TV screen.
Selects the on-screen menu items and changes the
values seen on the menu.
Exit the menu.
Returns to the previous menu.
Use these buttons according to the
direction on screen.
P.SIZE: Lets you choose the picture size.
MTS: Press to choose stereo, mono or
Separate Audio Program (SAP broadcast).
CC: Controls the caption decoder.
Use these buttons in a specific feature.
Display Modes (HDMI/DVI Input)
Installing batteries (Battery size: AAA)
Optimal resolution
4000 series:1366 x 768@60Hz / 5000 series: 1920 x 1080@60Hz
Mode
IBM
MAC
VESA DMT
Resolution
Horizontal
Frequency
(KHz)
Vertical
Frequency (Hz)
Pixel Clock
Frequency
(MHz)
Sync
Polarity
(H / V)
1366 x 768
1920 x 1080
640 x 350
31,469
70,086
25,175
+/-
c
c
720 x 400
31,469
70,087
28,322
-/+
c
c
640 x 480
35,000
66,667
30,240
-/-
c
c
832 x 624
49,726
74,551
57,284
-/-
c
c
1152 x 870
68,681
75,062
100,000
-/-
640 x 480
31,469
59,940
25,175
-/-
c
c
640 x 480
37,861
72,809
31,500
-/-
c
c
640 x 480
37,500
75,000
31,500
-/-
c
c
800 x 600
37,879
60,317
40,000
+/+
c
c
800 x 600
48,077
72,188
50,000
+/+
c
c
800 x 600
46,875
75,000
49,500
+/+
c
c
1024 x 768
48,363
60,004
65,000
-/-
c
c
1024 x 768
56,476
70,069
75,000
-/-
c
c
1024 x 768
60,023
75,029
78,750
+/+
c
c
1152 x 864
67,500
75,000
108,000
+/+
1280 x 720
45,000
60,000
74,250
+/+
c
✎✎ NOTE
xxUse the remote control within 23 feet from TV.
xxBright light may affect the performance of the remote control.
Avoid use when nearby fluorescent lights or neon signs.
xxThe Color and shape may vary depending on the model.
c
c
c
1280 x 800
49,702
59,810
83,500
-/+
1280 x 1024
63,981
60,020
108,000
+/+
1280 x 1024
79,976
75,025
135,000
+/+
1366 x 768
47,712
59,790
85,500
+/+
1440 x 900
55,935
59,887
106,500
-/+
c
1600 x 900RB
60,000
60,000
108,000
+/+
c
1680 x 1050
65,290
59,954
146,250
-/+
c
1920 x 1080
67,500
60,000
148,500
+/+
c
c
c
c
c
c
-4-
How to Stop Auto Programming
Channel Menu
1. Press the ENTERE button.
❑❑ Seeing Channels
2. A message will ask Stop Auto Program? Select Yes by
pressing the ◄ or ► button.
Channel List
3. Press the ENTERE button.
Add, delete or set Favorite channels and use the program guide for
digital broadcasts. Select a channel in the All Channels, Added
Channels, Favorite or Programmed screen by pressing the ▲
/ ▼ buttons, and pressing the ENTERE button. Then you can
watch the selected channel.
Added Channels
Air 6
6-1 Air
♥ TV #6
7-1 ♥ TV #7
❑❑ Other Features
Clear Scrambled Channel
This function filters out scrambled channels after Auto Program is
completed. This process may take up to 20~30 minutes.
✎✎ Press the ENTERE button to stop the Clear Scrambled
Channel.
✎✎ This function is only available in Cable mode.
8
Air
9
Air
9-1
♥ TV #9
10
Air
10-1
♥ TV #10
11-1
♥ TV #11
' Zoom ' Select T Tools ► Next Program
Channel List
Channel List Option Menu t
Set each channel using the Channel List menu options. Option
menu items may differ depending on the channel status.
■■ All Channels: Shows all currently available channels.
■■ Added Channels: Shows all added channels.
■■* Favorite: Shows all favorite channels.
■■ Programmed: Shows all currently reserved programs.
■■Add / Delete: Delete or add a channel to display the channels
you want.
✎✎ All deleted channels will be shown on the All Channels
menu.
✎✎ A gray-colored channel indicates the channel has been
✎✎ Using the remote control buttons with the Channel List
xxGreen (Zoom): Enlarges or shrinks a channel number.
xxYellow (Select): Selects multiple channel lists. Select desired
deleted.
✎✎ The Add menu only appears for deleted channels.
✎✎ Delete a channel from the Added Channels or Favorite
channels and press the Yellow button to set all the selected
channels at the same time. The c mark appears to the left of
the selected channels.
menu in the same manner.
■■Add to Favorite / Delete from Favorite t: Set channels
you watch frequently as Favorites.
■■Timer Viewing: You can set a desired channel to be displayed
automatically at the set time; even when you are watching
another channel. Set the current time first to use this function.
✎✎ Only memorized channels can be reserved.
xxT (Tools): Displays the Channel List option menu. (The
Options menus may differ depending on the situation.)
Channel Status Display icons
Icons
Operations
c
A channel selected.
*
A channel set as a Favorite.
)
A reserved program.
(
A program currently being broadcast.
✎✎ Reserved programs will be displayed in the Programmed
menu.
✎✎ When a digital channel is selected, press the ► (Next
Program) button to view the digital program. If you select
the ENTERE(Schedule) button on the next program, you
can set Timer Viewing directly.
■■Channel Name Edit (analog channels only): Assign your own
channel name.
■■Select All: Select all the channels in the channel list.
t
Antenna (Air / Cable)
■■Deselect All: Deselect all the selected channels.
Before your television can begin memorizing the available channels,
✎✎ You can only select Deselect All when one or more
you must specify the type of signal source that is connected to the
channels are selected.
TV (i.e. an Air or a Cable system).
■■Auto Program: Scans for a channel automatically and stores in
the TV.
❑❑ Memorizing channels
Auto Program
✎✎ When selecting the Cable TV system: Selects the cable
Programmed
system. STD, HRC and IRC identify various types of cable
TV systems. Contact your local cable company to identify the
type of cable system that exists in your particular area. At this
point, the signal source has been selected.
✎✎ After all the available channels are stored, it starts to
remove scrambled channels. The Auto program menu then
reappears.
✎✎ Press the ENTERE button to stop the channel store during
Auto Program.
(in Channel List)
You can view, modify or delete a show you have reserved to watch.
■■Change Info: Change a show you have reserved to watch.
■■Cancel Schedules: Cancel a show you have reserved to watch.
■■Information: Display a show you have reserved to watch. (You
can also change the reservation Information.)
■■Select All / Deselect All: You can select or deselect all channels
in the channel list.
-5-
Picture Options
✎✎ When connecting a PC, you can only make changes to the
Channel Mode
Change the channel mode directly between Added Channels and
Favorite Channels.
Color Tone, Size and HDMI Black Level.
✎✎ The Favorite Channels is enabled only when you set Add to
■■Color Tone (Cool / Standard / Warm1 / Warm2)
✎✎ Warm1 or Warm2 will be deactivated when the picture mode
is Dynamic.
Favorite.
Fine Tune
■■Size: Your cable box/satellite receiver may have its own set of
screen sizes as well. However, we highly recommend you use 16:9
mode most of the time.
If the reception is clear, you do not have to fine tune the channel, as
16:9: Sets the picture to 16:9 wide mode.
this is done automatically during the search and store operation. If the
Zoom1: Use for moderate magnification.
signal is weak or distorted, fine tune the channel manually.
Zoom2: Use for a stronger magnification.
✎✎ Fine tuned channels that have been saved are marked with an
Wide Fit: Enlarges the aspect ratio of the picture to fit the entire
asterisk “*” on the right-hand side of the channel number in the
screen.
channel banner.
4:3: Sets the picture to basic (4:3) mode.
✎✎ To reset the fine-tuning, select Reset.
✎✎ Do not watch in 4:3 format for a long time. Traces of borders
displayed on the left, right and center of the screen may
cause image retention (screen burn) which are not covered
by the warranty.
(analog channels only)
Picture Menu
Mode t
Screen Fit (DTV): Displays the full image without any cut-off when
HDMI (720p / 1080i / 1080p) or Component (1080i / 1080p)
signals are inputted.
✎✎ HD (High Definition): 16:9 - 1080i/1080p (1920x1080), 720p
(1280x720)
Select your preferred picture type.
✎✎ When connecting a PC, you can only select Entertain and
Standard.
■■Dynamic: Suitable for a bright room.
■■Standard: Suitable for a normal environment.
■■Movie: Suitable for watching movies in a dark room.
■■Entertain: Suitable for watching movies and games.
✎✎ Only available when connecting a PC.
✎✎ Settings can be adjusted and stored for each external device
you have connected to an input on the TV.
✎✎ Picture Sizes available by Input Source:
Backlight / Contrast / Brightness / Sharpness /
Color / Tint (G/R)
Your television has several setting options for picture quality control.
✎✎ When connecting a PC, you can only make changes to
Input Source
Picture Size
ATV, AV, Component (480i, 480p)
16:9, Zoom1, Zoom2, 4:3
DTV(1080i, 1080p), Component
(1080i, 1080p), HDMI (720p, 1080i,
1080p)
16:9, Wide Fit, 4:3, Screen Fit
■■Digital Noise Filter (Off / Low / Medium / High / Auto): If the
broadcast signal received by your TV is weak, you can activate the
Digital Noise Filter feature to reduce any static and ghosting that
may appear on the screen.
Backlight, Contrast, Brightness and Sharpness
Advanced Settings
✎✎ When the signal is weak, try other options until the best
(available in Standard / Movie mode)
picture is displayed.
Compared to previous models, new Samsung TVs have a more
precise picture.
■■HDMI Black Level (Normal / Low): Selects the black level on the
✎✎ When connecting a PC, you can only make changes to Gamma screen to adjust the screen depth.
✎✎ Available only in HDMI mode (RGB signals).
and White Balance.
■■Color Space (Auto / Native): Adjusts the range of colors available
to create the image.
■■White Balance: Adjusts the color temperature for a more natural
picture.
R-Offset / G-Offset / B-Offset: Adjusts each color’s (red, green,
blue) darkness.
R-Gain / G-Gain / B-Gain: Adjusts each color’s (red, green, blue)
brightness.
Reset: Resets the White Balance to it’s default settings.
■■Gamma: Adjusts the primary color intensity.
■■Dynamic Contrast (Off / Low / Medium / High): Adjusts the
screen contrast.
■■Black Tone (Off / Dark / Darker / Darkest): Select the black level
to adjust the screen depth.
■■Flesh Tone: Emphasize pink “flesh tone”.
■■Motion Lighting (Off / On): Reduce power consumption by
brightness control adapted motion.
✎✎ Available in Standard mode only.
■■Film Mode (Off / Auto): Sets the TV to automatically sense and
process film signals from all sources and adjusts the picture for
optimum quality.
✎✎ Available in ATV, DTV(interlace), AV, COMPONENT (480i /
1080i) and HDMI (480i / 1080i).
■■LED Motion Plus (Off / On): Removes drag from fast scenes with
a lot of movement to provide a clear picture.
Picture Reset
Resets your current picture mode to its default settings.
■■Reset Picture Mode: Returns all picture values in the currently
selected mode to the default settings.
-6-
Sound Menu
Mode t
■■Standard: Selects the normal sound mode.
■■Music: Emphasizes music over voices.
■■Movie: Provides the best sound for movies.
■■Clear Voice: Emphasizes voices over other sounds.
■■Amplify: Increase the intensity of high-frequency sounds to allow a
better listening experience for the hearing impaired.
Equalizer
(standard sound mode only)
■■Balance L/R: Adjusts the balance between the right and left
speaker.
■■100Hz / 300Hz / 1KHz / 3KHz / 10KHz (Bandwidth Adjustment):
Adjusts the level of specific bandwidth frequencies.
■■Reset: Resets the equalizer to its default settings.
■■Audio Delay: Lets you correct timing mismatches between the
audio track and the video when you are watching the TV and
listening to digital audio output from the TV through an external
device such as an AV receiver. When you select Audio Delay, a
slider appears. Use the left and right arrow buttons to adjust the
slider. Press ENTERE when done (0ms ~ 250ms).
Speaker Select
■■Speaker Select (External Speaker / TV Speaker): If you are
listening to the sound track of a broadcast or movie through an
external receiver, you may hear a sound echo caused by the
difference in decoding speed between the TV’s speakers and the
speakers attached to your audio receiver. If this occurs, set the TV
to External Speaker.
✎✎ When you set Speaker Select to External Speaker, the
TV’s speakers are turned off. You will hear sound through the
external speakers only. When you set Speaker Select to TV
Speaker both the TV’s speakers and the external speakers
are on. You will hear sound through both.
✎✎ When Speaker Select is set to External Speaker, the
VOLUME and MUTE buttons will not operate and the sound
settings will be limited.
SRS TruSurround HD
✎✎ If there is no video signal, both the TV’s speakers and the
external speakers will be mute.
SRS TruSurround HD is a patented SRS technology that solves the
problem of playing 5.1 multichannel content over two speakers.
TruSurround delivers a compelling, virtual surround sound experience Sound Reset
through any two-speaker playback system, including internal
■■Reset All: Resets all sound settings to the factory defaults.
television speakers. It is fully compatible with all multichannel formats.
(standard sound mode only)
Setup Menu
Preferred Language
(digital channels only)
Digital-TV broadcasts are capable of simultaneous transmission of
many audio tracks (for example, simultaneous translations of the
program into foreign languages).
❑❑ Setting the Time
✎✎ You can only select a language from among the ones being
Time
✎✎ The current time will appear every time you press the INFO
Multi-Track Sound (MTS)
■■Clock: Setting the clock is for using various timer features of the
TV.
✎✎ If you disconnect the power cord, you have to set the clock
again.
broadcasted.
button.
(analog channels only)
■■Mono: Choose for channels that are broadcasting in mono or if
you are having difficulty receiving a stereo signal.
■■Stereo: Choose for channels that are broadcasting in stereo.
■■SAP: Choose to listen to the Separate Audio Program, which is
usually a foreign-language translation.
✎✎ Depending on the program being broadcast, you can listen to
Mono, Stereo or SAP.
Clock Mode: Set the current time manually or automatically.
Clock Set: Set the Month, Day, Year, Hour, Minute and am/pm.
✎✎ Available only when Clock Mode is set to Manual.
Time Zone: Select your time zone.
DST (Daylight Saving Time): Switches the DST (Daylight Saving
Time) function on or off.
✎✎ DST and Time Zone function is only available when the
Clock Mode is set to Auto.
■■Sleep Timer t
Auto Volume
Because each broadcasting station has its own signal conditions,
the volume may fluctuate each time channel is changed. This feature
lets you automatically adjust the volume of the desired channel by
lowering the sound output when the modulation signal is high or by
raising the sound output when the modulation signal is low.
Automatically shuts off the TV after a preset period of time. (30,
60, 90, 120, 150 and 180 minutes).
✎✎ To cancel the Sleep Timer, select Off.
SPDIF Output
The SPDIF (Sony Philips Digital InterFace) outputs an uncompressed
digital audio signal when you connect the digital audio jack on the
back of the TV to a digital audio in jack on a receiver or home theater.
■■Audio Format: You can select the Digital Audio output (SPDIF)
format. The available Digital Audio output (SPDIF) format may differ
depending on the input source.
✎✎ By connecting the TV to a receiver or home theater with Dolby
Digital and 5.1ch speakers and selecting Dolby Digital, you
can maximize your interactive 3D sound experience.
Timer 1 / Timer 2 / Timer 3
Three different on / off timer settings can be made. You must set the
clock first.
■■On Time / Off Time: Set the hour, minute, am/pm and Activate /
Inactivate. (To activate the timer with the setting you have chosen,
set to Activate.)
■■Volume: Set the desired volume level.
-7-
✎✎ Game Mode is not available when the input source is set
■■Contents: When the On Time is activated, you can turn on a
specific channel or play back contents such as photo or audio
files.
- TV/USB: Select TV or USB. (Make sure that an USB device is
connected to your TV.)
- Antenna: Displays the current antenna source.
- Channel: Select the desired channel.
- Music/Photo: Select the folder containing MP3/JPEG files on
the USB device.
✎✎ The maximum displayed number of files, including sub
folders, in one folder of USB storage device is 2000.
to TV.
✎✎ After connecting the game console, set Game Mode to On.
Unfortunately, you may notice reduced picture quality.
Caption
(On-Screen Text Messages)
■■Caption: You can switch the caption function on or off. If
captions are not available, they will not be displayed on the
screen.
✎✎ The Caption feature does not work in Component or
HDMI mode.
✎✎ The media may not be playing smoothly when using the
device lower than USB 2.0.
■■Caption Mode: You can select the desired caption mode.
Default / CC1~CC4 / Text1~Text4: (analog channels only) The
Analog Caption function operates in either analog TV channel
mode or when a signal is supplied from an external device to
the TV. (Depending on the broadcasting signal, the Analog
Caption function may or may not work with digital channels.)
Default / Service1~Service6 / CC1~CC4 / Text1~Text4:
(digital channels only) The Digital Captions function works with
digital channels.
✎✎ Service1~6 may not be available in digital caption mode
depending on the broadcast.
■■Repeat: Select Once, Everyday, Mon~Fri, Mon~Sat,
Sat~Sun or Manual to set at you convenience. If you select
Manual, you can set up the day you want to activate the timer.
❑❑ Other Features
Program Rating Lock
The Program Rating Lock feature automatically locks out
programs that are deemed inappropriate for children. The user
must enter a PIN (personal identification number) before any of the
Program Rating Lock restrictions are set up or changed.
✎✎ Program Rating Lock is not available in HDMI or
Component mode.
✎✎ The default PIN number of a new TV set is “0-0-0-0”.
■■Program Rating Lock: You can block rated TV Programs.
■■TV Parental Guidelines: You can block TV programs
depending on their rating. This function allows you to control
what your children are watching.
■■MPAA Rating: You can block movies depending on their MPAA
rating. The Motion Picture Association of America(MPAA) has
implemented a rating system that provides parents or guardians
with advanced information on which films are appropriate for
children.
■■Canadian English: You can block TV programs depending on
their Anglophone Canadian.
■■Canadian French: You can block TV programs depending on
their French Canadian rating.
■■Downloadable U.S. Rating: Parental restriction information can
be used while watching DTV channels.
■■Change PIN: The Change PIN screen will appear. Choose any
4 digits for your PIN and enter it in Enter New PIN. Re-enter
the same 4 digits in Confirm New PIN. When the Change
PIN screen disappears, press the OK button. The TV has
memorized your new PIN.
✎✎ If you forget the PIN, press the remote-control buttons in
the following sequence, which resets the pin to “0-0-0-0” :
POWER (off) → MUTE → 8 → 2 → 4 → POWER (on)
Language
Set the menu language.
■■Digital Caption Options: (digital channels only)
Size: Options include Default, Small, Standard and Large. The
default is Standard.
Font Style: Options include Default and Styles 0 to 7. The
default is Style 0.
Foreground Color: Options include Default, White, Black, Red,
Green, Blue, Yellow, Magenta and Cyan.
You can change the color of the letter. The default is White.
Background Color: Options include Default, White, Black, Red,
Green, Blue, Yellow, Magenta and Cyan. You can change the
background color of the caption. The default is Black.
Foreground Opacity: This adjusts the opacity of text. Options
include Default, Transparent, Translucent, Solid and Flashing.
Background Opacity: This adjusts the opacity of the caption
background. Options include Default, Transparent, Translucent,
Solid and Flashing.
Return to Default: This option sets each Size, Font Style,
Foreground Color, Background Color, Foreground Opacity and
Background Opacity to its default.
✎✎ Digital Caption Options are available only when Default
and Service1 ~ Service6 can be selected in Caption
Mode.
✎✎ The Foreground and Background cannot be set to have
the same color.
Melody
Set so that a melody plays when the TV is turned on or off.
✎✎ The Melody does not play.
xxWhen no sound is output from the TV because the MUTE
button has been pressed.
✎✎ Choose between English, Español and Français.
xxWhen no sound is output from the TV because the volume has
Game Mode
xxWhen the TV is turned off by Sleep Timer function.
When connecting to a game console such as PlayStation™ or
Xbox™, you can enjoy a more realistic gaming experience by
selecting the game menu.
✎✎ Precautions and limitations for game mode
xxTo disconnect the game console and connect another external
device, set Game Mode to Off in the setup menu.
xxIf you display the TV menu in Game Mode, the screen shakes
been reduced to minimum with the VOL – button.
Auto Protection Time
■■Auto Protection Time (Off / 2 hours / 4 hours / 8 hours / 10
hours): If the screen remains idle with a still image for a certain
period of time defined by the user, the screen saver is activated
to prevent the formation of ghost images on the screen.
slightly.
-8-
Eco Solution
■■Energy Saving (Off / Low / Medium / High / Picture Off) :
This adjust the brightness of the TV in order to reduce power
consumption. If you select Picture Off, the screen is turned
off, but the sound remains on. Press any button except volume
button to turn on the screen.
■■Eco Sensor (Off / On) for LED 5000 series : To enhance your power
savings; the picture settings will automatically adapt to the light
in the room.
✎✎ If you adjust the Backlight, the Eco Sensor will be set to
Off.
❑❑ Connecting a USB Device
1. Turn on your TV.
2. Connect a USB device containing photo, music and/or movie
files to the USB jack on the side of the TV.
3. When USB is connected to the TV, you can select Media Play
(USB) in Application menu.
❑❑ Using the Media Play Menu
Min. Backlight: When Eco Sensor is On, the minimum screen
brightness can be adjusted manually.
✎✎ If Eco Sensor is On, the display brightness may change
(become slightly darker in most cases) depending on the
surrounding light intensity.
Media Play
Videos
■■No Signal Power Off (Off / 15 min. / 30 min. / 60 min.): Sets
how quickly the TV switches to standby mode, if no picture is
being received.
✎✎ Disabled when the PC is in power saving mode.
SUM
■■Auto Power Off (Off / On): The TV will be automatically turned
off when no user operation is received for 4 hours.
▒ Change Device
E Enter
R Return
1. Press the MENU button. Press the ▲ or ▼ button to select
Application, then press the ENTERE button.
2. Press the ▲ or ▼ button to select Media Play (USB), then
press the ENTERE button.
Support Menu
3. Press the ◄ or ► button to select an icon (Videos, Music,
Photos, Settings), then press the ENTERE button.
Self Diagnosis
■■Picture Test: Use to check for picture problems. If the problem
continues to occur, check the color pattern.
■■Sound Test: Use the built-in melody sound to check for sound
problems.
■■Signal Strength: (digital channels only) An HD channel’s
reception quality is either perfect or the channels are unavailable.
Adjust your antenna to increase signal strength.
■■Reset: Reset all settings to the factory defaults.
✎✎ The PIN input screen appears before the setup screen.
✎✎ It might not work properly with unlicensed multimedia files.
✎✎ Need-to-Know List before using Media Play (USB)
xxThe file system supports FAT16, FAT32 and NTFS.
xxCertain types of USB Digital camera and audio devices may not
✎✎ Enter your 4-digit PIN. Change the PIN using the Change
be compatible with this TV.
xxMedia Play only supports USB Mass Storage Class (MSC)
devices. MSC is a Mass Storage Class Bulk-Only Transport
device. Examples of MSC are Thumb drives and Flash Card
Readers. Devices should be connected directly to the TV’s USB
port. USB HDD is not supported.
PIN option.
xxBefore connecting your device to the TV, please back up your
Software Upgrade
xxA USB device that requires high power (more than 0.5A) may not
files to prevent them from damage or loss of data. SAMSUNG is
not responsible for any data file damage or data loss.
be supported.
Software Upgrade can be performed by downloading the latest
firmware from samsung.com to a USB memory device.
xxDo not disconnect the USB device while it is loading.
xxThe higher the resolution of the image, the longer it takes to
HD Connection Guide
display on the screen.
Refer to this information when connecting external devices to the
TV.
xxThe maximum supported JPEG resolution is 15360 x 8640 pixels.
xxIf a file is corrupted or the TV does not support the file type, the
Contact Samsung
xxThe TV cannot play MP3 files with DRM that have been
“Not Supported File Format” message appears.
POWER
P
downloaded from a for-pay site. Digital Rights Management
(DRM) is a technology that supports the creation, distribution,
and management of digital content in an integrated and
comprehensive way, including protecting the rights and interests
of content providers, preventing illegal copying of contents, and
managing billings and settlements.
View this information when your TV does not work properly or
when you want to upgrade the software. You can find information
regarding our call centers and how to download products and
software.
Media Play
Enjoy photos, music and/or movie files saved on a
USB Mass Storage Class (MSC) device.
MEDIA.P
-9-
xxPTP device is not supported.
xxIf an over-power warning message is displayed while you are
--
Internal
Name
Container
Format
Xsub
AVI
Picture Format
xxIf the TV has no input during the time set in Auto Protection Time,
SubStation Alpha
MKV
Text Format
xxThe power-saving mode of some external hard disk drives may be
Advanced SubStation
Alpha
MKV
Text Format
SubRip
MKV
Text Format
MPEG-4 Timed text
MP4
Text Format
connecting or using a USB device, the device may not be
recognized or may malfunction.
the Screensaver will run.
released automatically when your connect them to the TV.
xxIf you use a USB extension cable, the TV may not recognize the
USB device or may not be able to read the files on the device.
xxIf a USB device connected to the TV is not recognized, the list of
yy Supported Video Formats
files on the device is corrupted, or a file in the list is not played,
connect the USB device to a PC, format the device, and check the
connection.
File
Extension
xxIf a file you deleted from the PC is still found when you run Media
*.mp4
Play, use the “Empty the Recycle Bin” function on the PC to
permanently delete the file.
xxPhotos only supports sequential jpeg format.
xxThe scene search and thumbnail functions are not supported in the
*.avi
*.mkv
Videos.
xxIf the number of files and folders saved on a USB storage device is
Container
*.asf
*.wmv
one folder of USB storage device is 2000.
Resolution
Frame
rate(fps)
Bit
rate(Mbps)
DivX
3.11/4.x/5.1/6.0
1920x1080
6~30
30Mbps
H264
1920x1080
6~30
30Mbps
AVC
1920x1080
6~30
30Mbps
MJPEG
640x480
6~30
10Mbps
DivX
3.11/4.x/5.1/6.0
1920x1080
6~30
30Mbps
MPEG4 SP / ASP
1920x1080
6~30
30Mbps
H264
1920x1080
6~30
30Mbps
MJPEG
640x480
6~30
10Mbps
DivX 3.11 / 4.x
/5.1 / 6.0
1920x1080
6~30
30Mbps
MPEG4 SP / ASP
1920x1080
6~30
30Mbps
MP4
AVI,
MKV
approximately over 4000, the files and folders may not appear and
some folders may not be opened.
xxThe maximum displayed number of files, including sub folders, in
Video Codec
ASF
xxThe media may not be playing smoothly when using the device
lower than USB 2.0.
*.ts
*.trp
*.tp
Videos
*.m2ts
►
Movie 01.avi
00:04:03 / 00:07:38
*.dat
*.mpg
*.mpeg
*.vob
1/1
1920x1080
6~30
30Mbps
1920x1080
6~30
30Mbps
H. 264 BP / MP
/ HP
1920x1080
6~30
30Mbps
MPEG1
1920x1080
24/25/30
30Mbps
MPEG2
1920x1080
24/25/30
30Mbps
H. 264 BP / MP
/ HP
1920x1080
6~30
30Mbps
MPEG4 SP / ASP
1920x1080
6~30
30Mbps
H.264
1920x1080
6~30
30Mbps
H.264
1920x1080
6~30
30Mbps
Sorenson H.263
1920x1080
6~30
30Mbps
PS
*.3gp
3GPP
*.flv
*.swf
flash
formats
MP3 /
ADPCM /
AAC
MP3 /
AC3 /
LPCM /
ADPCM
/ DTS
Core
MP3 /
AC3 /
LPCM /
ADPCM
/ WMA /
WMA Pro
AC3 /
AAC /
MP3 /
DD+ /
HE-AAC
AC3 /
MPEG /
LPCM /
AAC
MP3
MP3
Other Restrictions
E Pause L Jump T Tools R Return
yy Video content will not play, or not play correctly, if there is an error in the
content or the container.
1. Press the ◄ or ► button to select Videos, then press the
ENTERE button in the Media Play menu.
2. Press the ◄/►/▲/▼ button to select the desired video in the file
list.
3. Press the ENTERE button or � (Play) button.
---
The selected file is displayed on the top with its playing time.
--
During video playback, you can search using the ◄ and ►
button.
If video time information is unknown, playing time and the
progress bar are not displayed.
you cannot play the game itself.
yy Sound or video may not work if the contents have a standard bit rate/
frame rate above the compatible Frame/sec listed in the table above.
yy If the Index Table is in error, the Seek (Jump) function is not supported.
yy The menu may take longer to appear if the video’s bit rate exceeds
10Mbps.
yy Video content can not be played, if there are many contents in one file.
Video Decoder
Supports up to H.264, Level 4.1
✎✎ In this mode, you can play movie clips contained in a game, but
H.264 FMO / ASO / RS, VC1 SP / MP / AP L4 and AVCHD are not supported.
MPEG4 SP, ASP :
– Below 1280 x 720: 60 frame max
yy Supported Subtitle Formats
--
TS
H.264
MPEG2
Audio
Codec
– Above 1280 x 720: 30 frame max
External
Name
File extension
MPEG-4 timed text
.ttxt
SAMI
.smi
SubRip
.srt
SubViewer
.sub
Micro DVD
.sub or .txt
SubStation Alpha
.ssa
Advanced SubStation Alpha
.ass
H.263 is not supported.
GMC is not support.
Audio Decoder
Supports up to WMA7, 8, 9 STD, 9 PRO, 10 PRO
WMA 9 PRO and WMA 10 PRO support 5.1 channel. (LBR mode of WMA Pro is
not supported)
WMA Lossless is not supported.
- 10 -
Music
Playing Multiple Files
■■Playing selected video/music/photo files
Playlist
I Love You
Jhon
I Love you
Jhon
1st Album
Pop
2010
4.2MB
No Singer
1. Press the Yellow button in the file list to select the desired file.
3/15
2. Repeat the above operation to select multiple files.
Music 1
✎✎ NOTE
xxThe c mark appears to the left of the selected files.
xxTo cancel a selection, press the Yellow button again.
xxTo deselect all selected files, press the TOOLS button and select
Music 2
No Singer
Music 3
No Singer
Music 4
01:10 / 04:02
No Singer
Music 5
No Singer
Deselect All.
E Pause L Jump T Tools R Return
SUM
3. Press the TOOLS button, and then select Play Selected
Contents.
1. Press the ◄ or ► button to select Music, then press the
ENTERE button in the Media Play menu.
2. Press the ◄/►/▲/▼ button to select the desired Music in the file
list.
■■Playing the video/music/photo file group
1. While a file list is displayed, move to any file in desired group.
2. Press the TOOLS button, and then select Play Folder.
3. Press the ENTERE button or � (Play) button.
✎✎ During music playback, you can search using the ◄ and ►
Media Play - Additional Functions
✎✎ � (REW) and μ (FF) buttons do not function during play.
✎✎ Only displays the files with MP3 and PCM file extension. Other
■■Videos/Music/Photos Play Option menus
When playing a file, press the TOOLS button.
button.
file extensions are not displayed, even if they are saved on the
same USB device.
✎✎ If the sound is abnormal when playing MP3 files, adjust the
Equalizer in the Sound menu. (An over-modulated MP3 file
may cause a sound problem.)
Photos
Normal
Image1024.jpg
1024x768
2011/10/24
1. Press the ◄ or ► button to select Photos, then press the
ENTERE button in the Media Play menu.
2. Press the ◄/►/▲/▼ button to select the desired photo in the file
list.
3. Press the ENTERE button or � (Play) button.
✎✎ NOTE
xxWhile a photo list is displayed, press the � (Play) / ENTERE
button on the remote control to start the slide show.
xxAll files in the file list section will be displayed in the slide show.
xxDuring the slide show, files are displayed in order.
xxDuring the slide show, you can adjust the slide show speed using
(π) (REW) or (µ) (FF) button.
xxYou can move to other file using ◄ or ► button.
yy Supported Photo Formats
JPEG
Operation
Title
You can move the other file directly.
c
Repeat Mode
You can play movie and music files
repeatedly.
c
Picture Size
You can adjust the picture size to your
preference.
c
Picture Mode
You can adjust the picture setting.
c
Sound Mode
You can adjust the sound setting.
c
Subtile Setting
You can play the video with Subtitles. This
function only works if the subtitles are the
same file name as the video.
c
Audio Format
You can select the digital audio output
format.
c
Audio
Language
You can change the audio language if the
video has more than one language.
c
Stop Slide
Show /
Start Slide
Show
You can start or stop a Slide Show.
c
Slide Show
Speed
You can select the slide show speed
during the slide show.
c
Background
Music
You can set and select background music
when watching a Slide Show.
c
Zoom
You can zoom into images in full screen
mode.
c
Rotate
You can rotate images in full screen
mode.
c
Information
You can see detailed information about
the played file.
3/15
E Pause L Previous/Next T Tools R Return
Image
Category
Photo
Resolution
Base-line
15360 x 8704
Progressive
1024 x 768
Other Restrictions
Videos
c
Music
Photos
c
c
c
c
c
c
Settings
Using the Setup Menu
■■DivX® Video On Demand : Shows the registration code
authorized for the TV. If you connect to the DivX web site and
register with 10-digit registration code, you can download the VOD
activation file. Once you play it using Media Play, the registration is
completed.
✎✎ For more information on DivX® VOD, visit “http://vod.divx.
com”.
■■Information: Select to view information on the connected device.
yy CMYK, YCCK Color space JPEG are not supported.
- 11 -
Securing the TV to the Wall
Other Information
Caution: Pulling, pushing, or climbing onto the TV
may cause the TV to fall. In particular, ensure that your
children do not hang over or destabilize the TV; doing
so may cause the TV to tip over, resulting in serious
injuries or death. Follow all safety precautions provided
on the included Safety Flyer. For added stability, install
the anti-fall device for safety purposes, as follows.
Installing the Wall Mount Kit
The wall mount kit (sold separately) allows you to mount the TV on
the wall.
For detailed information on installing the wall mount, see the
instructions provided with the wall mount items. Contact a
technician for assistance when installing the wall mount bracket.
Samsung Electronics is not responsible for any damage to the
product or injury to yourself or others if you elect to install the wall
mount on your own.
To prevent the TV from falling
Wall Mount Kit Specifications (VESA)
1. Drive the screws into the clamps and firmly fasten them onto the
wall. Make sure the screws are firmly fixed into the wall.
✎✎ Since the necessary clamps, screws, and string are not
supplied, please purchase these additionally.
✎✎ The wall mount kit is not supplied, but sold separately.
2. Remove the screws from the back center of the TV, put the
screws into the clamps, and then fasten the screws onto the TV
again.
Install your wall mount on a solid wall perpendicular to the floor.
When attaching to other building materials, please contact your
nearest dealer. If you install the TV on a ceiling or slanted wall, it
may fall and result in severe personal injury.
✎✎ NOTE
xxStandard dimensions for wall mount kits are shown in the table
below.
3. Connect the clamps fixed onto the TV and the clamps fixed onto
the wall with a strong cable and then tie the string tightly.
✎✎ Verify all connections are properly secured. Periodically check
the connections for any sign of fatigue or failure. If you have
any doubt about the security of your connections, contact a
professional installer.
xxWhen purchasing our wall mount kit, a detailed installation
manual and all parts necessary for assembly are provided.
xxDo not use screws that do not comply with the VESA standard
screw specifications.
xxDo not use screws that are longer than the standard dimension
or do not comply with the VESA standard screw specifications.
Screws that are too long may cause damage to the inside of the
TV set.
xxFor wall mounts that do not comply with the VESA standard
screw specifications, the length of the screws may differ
depending on the wall mount specifications.
product or cause the product to fall, leading to personal injury.
Samsung is not liable for these kinds of accidents.
slot is beside the “K” icon.
when a non-VESA or non-specified wall mount is used or the
consumer fails to follow the product installation instructions.
✎✎ The position and color may differ depending on the model.
xxDo not mount the TV at more than a 15 degree tilt.
xxAlways have two people mount the TV on a wall.
LED-TV
VESA screw hole specs
(A * B) in millimeters
Standard
Screw
19~22
75 X 75
26
100 X 100
32~40
200 X 200
M6
46~60
400 X 400
M8
Kensington Lock
✎✎ Please find a “K” icon on the rear of the TV. The Kensington
xxSamsung is not liable for product damage or personal injury
TV size in
inches
wall are equal to or lower than the clamps fixed on the TV.
Untie the string before moving the TV.
The Kensington Lock is not supplied by Samsung. It is a device
used to physically fix the system when using it in a public place.
Refer to the manual provided with the Kensington Lock for
additional information on proper use.
xxDo not fasten the screws too firmly. This may damage the
Product
Family
✎✎ Install the TV close to the wall so that it does not fall.
✎✎ It is safe to connect the string so that the clamps fixed on the
Assembling the Wire Holder stand
Quantity
M4
4
Do not install your Wall Mount Kit
while your TV is turned on. It may
result in personal injury due to electric
shock.
- 12 -
Troubleshooting
If the TV seems to have a problem, first review this list of possible problems and solution. If none of these troubleshooting tips apply, visit
samsung.com, then click on Support, or call Samsung customer service.
Problem
Possible Solution
Flickering and Dimming
If your Samsung Television is flickering or dimming sporadically, you may need to disable some of its energy efficient
features like the Eco Sensor or the Energy Saving feature. If you follow below step with your remote, you can turn
these features off or on.
yy Energy saving : User Menu → Setup → Eco Solution → Energy Saving
yy Eco Sensor : User Menu → Setup → Eco Solution → Eco Sensor
Component Connections /
Screen Color
If you find that the color on your Samsung television’s screen is not correct or black and White, first run a Self
Diagnosis on the TV to make sure there are no device issues.
yy Self Diagnosis : User Menu → Support → Self Diagnosis → Picture Test
yy If the test is ok, try making sure ;
yy Your connections are all consistent. For example, if you’ve used the AV In jack on your TV, make sure you have
used the AV Out jack on your video source.
yy Try making sure you have connected to the correct jacks. For example, if you use the Component jacks, labeled
Pb, Pr, and Y, to connect your TV and video source, make sure you have connected the blue Pb jack on the video
source to the blue Pb jack on the TV, the red Pr jack on the source to the red Pr jack on the TV.
Screen Brightness
If you find that the colors on your Samsung TV are correct but just a little too dark or bright, there are some settings
you should check before calling for a repair.
yy Backlight, Contrast, Brightness, Sharpness, Color, Tint and so on. Go in to “Picture” on user Menu then try
adjusting options mentioned above.
Unwanted Powering off
If your Samsung TV appears to turn off by itself, there may be an issue with either your Timer settings or your Eco
friendly No Signal Power Off feature.
First make sure you Sleep Timer is not accidentally set. The sleep timer allows you the comfort of falling asleep with
the TV still on but, turns it off after a certain period of time so as not to waste energy.
yy Sleep Timer : User Menu → Setup → Time → Sleep Timer
If the Sleep Timer is not activated, you may have engaged the No Signal Power Off or Auto Power Off feature.
yy No Signal Power Off : User Menu → Setup → Eco Solution → No Signal Power
yy Auto Power Off : User Menu → Setup → Eco Solution → Auto Power Off
Trouble Powering On
Before Turn on check red light on the right or left bottom of your TV. Press power on button on TV or remote
and it will blink about 5 times before turning on.
If you find that you are having trouble powering on your Samsung television, there are a number of things to check
before making a call to the service department.
yy If you happen to be using the TV as a monitor and the stand-by light only blinks for a few seconds when you press
the power button, your PC is in sleep mode. To take your PC out of sleep mode, press a key on your keyboard or
move the mouse. Then try turning your TV on.
If you’re sure your power cord, remote control, and PC are functioning properly, you may be having a cable issue. If
you have a cable or satellite box, your TV may appear to be off because the cable or satellite box is not outputting a
signal. To test the signal output of your cable or satellite box, press the guide or info button on the cable or satellite
box remote control. If the screen displays the guide or info data, the problem is caused by the box.
Stand Assembly
• If you have any trouble to assemble the stand though you refer to “Install the Stand” mentioned at separate guide.
Cannot find channel
• Re-run plug and play.
Poor picture
First, perform the Picture Test and to see if your TV is properly displaying the test image.
Go to MENU - Support - Self Diagnosis - Picture Test
If the test image is properly displayed, the poor picture may be caused by the source or signal.
The TV image does not look as good as
it did in the store.
• If you have an analog cable/satellite box, upgrade to a digital set top box. Use HDMI or Component cables to
deliver HD (high definition) picture quality.
• Cable/Satellite subscribers: Try HD channels from the channel line up.
• Air/Cable Antenna connection: Try HD channels after performing Auto program.
✎✎ Many HD channels are up scaled from SD(Standard Definition) contents.
• Adjust the Cable/Set top box video output resolution to 1080i or 720p.
The picture is distorted: macroblock
error, small block, dots, pixelization.
• Compression of video contents may cause picture distortion, especially on fast moving pictures such as sports and
action movies.
• A weak signal can cause picture distortion. This is not a TV problem.
• Mobile phones used close to the TV (within 3.3ft) may cause noise in the picture on analog and digital channels.
Color is wrong or missing.
• If you’re using a component connection, make sure the component cables are connected to the correct jacks.
Incorrect or loose connections may cause color problems or a blank screen.
- 13 -
There is poor color or brightness.
• Adjust the Picture options in the TV menu. (go to Picture Mode / Color / Brightness / Sharpness)
• Adjust Energy Saving option in the TV menu. (go to MENU - Setup - Eco Solution - Energy Saving )
• Try resetting the picture to view the default picture setting. (go to MENU - Picture - Picture Reset)
There is a dotted line on the edge of
the screen.
• If the picture size is set to Screen Fit, change it to 16:9.
• Change cable/satellite box resolution.
The picture is black and white.
• If you are using an AV composite input, connect the video cable (yellow) to the Green jack of component input 1 on
the TV.
When changing channels, the picture
freezes or is distorted or delayed.
• If connected to a cable box, please try to reset it. (reconnect the AC cord and wait until the cable box reboots. It
may take up to 20 minutes)
• Set output resolution of the cable box to 1080i or 720p.
Sound Problem
First of all, please perform the Sound Test to confirm that your TV audio is properly operating.
(go to MENU - Support - Self Diagnosis - Sound Test)
If the audio is OK, the sound problem may caused by the source or signal.
There is no sound or the sound is too
low at maximum volume.
• Please check the volume of the device (Cable/Sat Box, DVD, Blu-ray, etc.) connected to your TV.
The picture is good but there is no
sound.
• If you are using an external device, check the device’s audio output option (ex. you may need to change your cable
box’s audio option to HDMI when you have a HDMI connected to your TV).
• Reboot the connected device by reconnecting the device’s power cable.
The speakers are making an
inappropriate noise.
• Check the cable connections. Make sure a video cable is not connected to an audio input.
• For Antenna or Cable connections, check the signal information. A weak signal may cause sound distortion.
• Perform the Sound Test as explained above.
No Picture, No Video
The TV will not turn on.
• Make sure the AC power cord is securely plugged into the wall outlet and the TV.
• Make sure the wall outlet is working.
• Try pressing the POWER button on the TV to make sure the problem is not the remote.
If the TV turns on, refer to ‘Remote control does not work’ below.
The TV turns off automatically.
• Ensure the Sleep Timer is set to Off in the Time menu.
• If your PC is connected to the TV, check your PC power settings.
• Make sure the AC power cord is plugged in securely to the wall outlet and the TV.
• When you are watching TV connected to an antenna or cable connection, the TV will turn off after 10 - 15 minutes
if there is no signal.
There is no picture/video.
• Check the cable connections. (Remove and reconnect all cables connected to the TV and external devices).
• Set your external device’s (Cable/Sat Box, DVD, Blu-ray etc) video outputs to match the connections to the TV
input. For example, if an external device’s output is HDMI, it should be connected to an HDMI input on the TV.
• Make sure your connected devices are powered on.
• Be sure to select the TV’s correct source by pressing the SOURCE button on the remote control.
• Reboot the connected device by reconnecting the device’s power cable.
RF(Cable/Antenna) Connection
The TV is not receiving all channels.
• Make sure the coaxial cable is connected securely.
• Please try Auto Program to add available channels to the channel list.
go to MENU - Channel - Auto program then select Auto and make sure the correct Cable TV signal type is set in
the menu. There are 3 options. (STD, HRC and IRC)
• Verify the antenna is positioned correctly.
No Caption on digital channels.
• Check the Caption Setup menu. Try changing Caption Mode Service 1 to CC1.
• Some channels may not have caption data.
The picture is distorted: macroblock,
error, small block, dots, pixelization.
• Compression of video contents may cause picture distortion. Especially on fast moving pictures such as sports and
action movies.
• A weak signal can cause picture distortion. This is not a TV problem.
Others
Purple/green rolling horizontal bars and
buzzing noise from the TV speakers with
Component cable connection.
• Remove the left and right audio connections from the set-top-box. If the buzzing stops, this indicates that the settop-box has a grounding issue. Replace the Component video cables with an HDMI connection.
The picture will not display in full screen.
• HD channels will have black bars on either side of the screen when displaying up scaled SD (4:3) contents.
• Black bars on the Top & Bottom will be shown on movies that have aspect ratios different from your TV.
• Adjust the picture size option on your external device or change the TV to full screen.
The remote control does not work.
• Replace the remote control batteries with correct polarity (+/–).
• Clean the transmission window located on the top of the remote control.
• Try pointing the remote directly at the TV from 5~6 feet away.
The cable/set top box remote control
does not turn the TV on or off, or adjust
the volume.
• Program the Cable/Set top box remote control to operate the TV. Refer to the Cable/Set top box user manual for
the SAMSUNG TV code.
A “Mode Not Supported” message
appears.
• Check the supported resolution of the TV and adjust the external device’s output resolution accordingly. Refer to
resolution settings in this manual.
- 14 -
Caption on the TV menu is greyed out.
• You cannot select Caption in the TV menu when watching content from a device connected via HDMI or
Component.
• Caption must be activated on the external device.
There is a plastic smell from the TV.
• This smell is normal and will dissipate over time.
TV Signal Strength is unavailable in the
Self Diagnosis Test menu.
• This function is only available for digital channels from an Antenna / RF/Coax connection.
TV is tilted to the right or left side.
• Remove the stand base from the TV and reassemble it.
The Channel menu is grey out
(unavailable).
• The Channel menu is only available when you select the TV source.
Your settings are lost after 30 minutes or
every time the TV is turned off.
• If TV is in the Store Demo mode, it will reset audio and picture settings every 30 minutes. Please change from
Store Demo mode to Home Use mode using the Plug & Play procedure. Press the SOURCE button to select TV
mode, go to MENU → Setup → Plug & Play → ENTERE.
You have intermittent loss of audio or
video.
• Check the cable connections and reconnect them.
• Loss of audio or video can be caused by using overly rigid or thick cables. Make sure the cables are flexible enough
for long term use. If mounting the TV to the wall, we recommend using cables with 90 degree connectors.
You see small particles when you look
closely at the edge of the frame of
the TV.
• This is part of the product’s design and is not a defect.
POP (TV’s internal banner ad) appears
on the screen.
• Select Home Use under Plug & Play mode.
For details, refer to Plug & Play (Initial Setup).
✎✎ This TFT LED panel uses a panel consisting of sub pixels which require sophisticated technology to produce. However, there may be a few bright or dark
pixels on the screen. These pixels will have no impact on the performance of the product.
✎✎ Some functions and pictures shown in this manual are available on specific models only.
✎✎ You can keep your TV as optimum condition to upgrade the latest firmware on web site (samsung.com → Support → Downloads) by USB.
Storage and Maintenance
✎✎ If you attached some stickers on the TV screen, it remains some debris after removing the sticker. Please clean it to watch TV.
✎✎ The exterior and screen of the product can get scratched during cleaning. Be sure to wipe the exterior and screen carefully using a soft cloth to prevent
scratches.
Clean the product with a soft cloth dampened
with in a small amount of water. Do not use a
flammable liquid (e.g. benzene, thinners) or a
cleaning agent.
Do not spray water directly onto the product.
Any liquid that goes into the product may
cause a failure, fire, or electric shock.
License
TheaterSound, SRS and the
SRS Labs, Inc.
symbol are trademarks of
Open Source License Notice
Open Source used in this product can be found on the following webpage. (http://
opensource.samsung.com) Open Source License Notice is written only English.
TheaterSound technology is incorporated under licence
from SRS Labs, Inc.
SRS TheaterSound™ provides the most immersive surround sound experience from the TVs
built-in speakers, while maintaining steady volume and delivering rich bass and clear dialog.
To send inquiries and requests for questions regarding open sources, contact Samsung via Email (oss.
request@samsung.com).
■ This product uses some software programs which are distributed under the Independent JPEG
Group.
DivX Certified® to play DivX® video up to HD 1080p,
including premium content.
ICU License - ICU 1.8.1 and later
COPYRIGHT AND PERMISSION NOTICE
ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a subsidiary of
Rovi Corporation. This is an official DivX Certified® device that plays DivX video. Visit divx.
com for more information and software tools to convert your files into DivX videos. ABOUT
DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered in order to play
purchased DivX Video-on-Demand (VOD) movies. To obtain your registration code, locate
the DivX VOD section in your device setup menu. Go to vod. divx.com for more information
on how to complete your registration. Covered by one or more of the following U.S. patents
: 7,295,673; 7,460,668; 7,515,710; 7,519,274 DivX®, DivX Certified® and associated logos
are trademarks of Rovi Corporation or its subsidiaries and are used under license.
Copyright (c) 1995-2008 International Business Machines Corporation and others All rights reserved.
Permission is hereby granted, free of charge, to any person obtaining a copy of this software and
associated documentation files (the "Software"), to deal in the Software without restriction, including
without limitation the rights to use, copy, modify, merge, publish, distribute, and/or sell copies of the
Software, and to permit persons to whom the Software is furnished to do so, provided that the above
copyright notice(s) and this permission notice appear in all copies of the Software and that both the
above copyright notice(s) and this permission notice appear in supporting documentation.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS. IN NO EVENT
SHALL THE COPYRIGHT HOLDER OR HOLDERS INCLUDED IN THIS NOTICE BE LIABLE FOR
ANY CLAIM, OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES
WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF
CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION
WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
Manufactured under license from Dolby Laboratories.
Dolby and the double-D symbol are trademarks of Dolby
Laboratories.
Except as contained in this notice, the name of a copyright holder shall not be used in advertising or
otherwise to promote the sale, use or other dealings in this Software without prior written authorization
of the copyright holder.
Manufactured under license under U.S. Patent Nos:
5,956,674; 5,974,380; 6,487,535 & other U.S. and
worldwide patents issued & pending. DTS, the Symbol, &
DTS and the Symbol together are registered trademarks
& DTS 2.0+Digital Out is a trademark of DTS, Inc. Product
includes software. © DTS, Inc. All Rights Reserved.
All trademarks and registered trademarks mentioned herein are the property of their respective owners.
The terms HDMI and HDMI High-Definition Multimedia
Interface, and the HDMI Logo are trademarks or registered
trademarks of HDMI Licensing LLC in the United States
and other countries.
- 15 -
Specifications
Environmental Considerations
Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity
Model Name
Display Resolution
Screen Size
(Diagonal)
Sound
Output
Dimensions (W x D x H)
Body
With stand
Weight
Without Stand
With Stand
Model Name
50°F to 104°F (10°C to 40°C)
10% to 80%, non-condensing
-4°F to 113°F (-20°C to 45°C )
5% to 95%, non-condensing
UN26EH4000
UN26EH4050
UN32EH4000
UN32EH4050
UN32EH5000
UN32EH5050
1366 x 768
1366 x 768
1920 x 1080
26" Class
(26,0" measured diagonally)
32" Class
(31,5" measured diagonally)
32" Class
(31,5" measured diagonally)
5W x 2
10W x 2
24,2 X 3,6 X 14,3 inches
(615,1 X 93,3 X 365,6 (mm))
24,2 X 7,1 X 16,5 inches
(615,1 X 180,7 X 419,2 (mm))
29,0 X 3,6 X 17,1 inches
(738.8 X 93,3 X 436,7 (mm))
29,0 X 7,5 X 19,4 inches
(738,8 X 191,7 X 493,3 (mm))
29,0 X 3,6 X 17,5 inches
(738,3 X 93,2 X 444,9 (mm))
29,0 X 7,5 X 19,6 inches
(738,3 X 191,7 X 498,2 (mm))
9,2 Ibs (4,2 kg)
10,3 Ibs (4,7 kg)
12,5 Ibs (5,7 kg)
13,8 Ibs (6,3 kg)
13,0 Ibs (5,9 kg)
14,5 Ibs (6,6 kg)
UN40EH5000
UN40EH5050
UN46EH5000
UN46EH5050
UN50EH5000
UN50EH5050
UN50EH5070
Display Resolution
Screen Size
(Diagonal)
1920 x 1080
40" Class
(40,0" measured diagonally)
46" Class
(45,9" measured diagonally)
Sound
Output
Dimensions (W x D x H)
Body
With stand
Weight
Without Stand
With Stand
50" Class
(49,5" measured diagonally)
10W x 2
36,5 X 3,6 X 21,6 inches
(927,6 X 93,0 X 551,0 (mm))
36,5 X 8,9 X 23,8 inches
(927,6 X 227,6 X 606,5 (mm))
41,7 X 3,7 X 24,6 inches
(1059,8 X 94,3 X 625,6 (mm))
41,7 X 8,9 X 26,7 inches
(1059,8 X 227,6 X 680,7 (mm))
44,7 X 3,7 X 26,3 inches
(1137,6 X 94,5 X 669,4 (mm))
44,7 X 8,9 X 28,5 inches
(1137,6 X 227,6 X 725,0 (mm))
19,8 Ibs (9,0 kg)
24,2 Ibs (11,0 kg)
27,5 Ibs (12,5 kg)
31,9 Ibs (14,5 kg)
34,6 Ibs (15,7 kg)
40,3 Ibs (18,3 kg)
✎✎ Design and specifications are subject to change without prior notice.
✎✎ This device is a Class B digital apparatus.
✎✎ For information about power supply, and more about power consumption, refer to the label attached to the product.
✎✎ Typical power consumption is measured according to Energy Star Program requirements for Televisions.
- 16 -