Friedrich Air Conditioning CP10G10A Chill® 10000 Btu/h R-410A 11.3 EER Room Air Conditioner User guide

For inner cleaning, contact an Authorized Service Center or a dealer.

Do not use harsh detergent that causes corrosion or damage on the unit.

Harsh detergent may also cause failure of product, fire, or electronic shock.

6 7 8

7

6

3

5

2

5 4 3 2 1

MoneySaver: The fan will stop when the compressor stops cooling. The fan will turn on approximately every 3 minutes to sample to room air and determine if more cooling is needed.

Cool: fan runs continually for normal cooling operation

Fan Only: Fan-only operation

*MoneySaver has it’s own button on your remote control

4. CHECK FILTER & FILTER RESET

Check Filter: Your ‘Check Filter’ LED will light up after approximately 250 hours of operation, notifying you that your filter needs to be cleaned.

Filter Reset: press ‘Temp ∨∧ ’ together to turn off ‘Check Filter’ light.

*Filter Reset must be done from unit control

panel, not remote control

8

*Timer Clear: On remote control, ‘Timer Clear’ button

will cancel the timer setting

6. OPERATION MODE SELECTOR

Push the ‘Mode’ button to rotate between

MoneySaver → Cool → Fan → Dry modes.

(select Dry mode for dry/dehumidifier operation)