instruction manual

USER’S MANUAL
version 1.1
English
CDB-6500C DOORBELL
CDB-6500C DOORBELL
A
Ding-Dong
B
C
*
* Picture: doorbell button CDB-6500A
(not included)
A: Indicator
B: Letter code selector
1
C: Loudspeaker
CDB-6500C DOORBELL
[1] Turn the letter code selector to the desired
‘house code’.
[2] Plug the gong into any mains socket in your
home.
The code must match that of the associated
COCO transmitter!
For additional information, see the manual for
the transmitter!
You can move the gong to a different socket at
any time without having to set the code again!
2
CDB-6500C DOORBELL
Remarks
Reminders
• This wireless gong is a receiver and can only be used in combination with at least one suitable COCO
transmitter CDB-6500A (push-button transmitter), CDB-6500BC (built-in doorbell transmitter) and/or
PIR-2050 (motion sensor).
• If the product does not work or does not work properly:
- Check the correct placement and/or function of the battery of the transmitter (replace if necessary).
- Check whether the house codes of the doorbell transmitter and gong/receiver match.
- Someone nearby may be using the same house code. Set the system to a different house code.
- Check whether there is power at the mains socket to which the gong is connected (the indicator must
be lit).
Safety instructions
• Never use COCO products for life support systems or other applications in which equipment
malfunctions can have life-threatening consequences.
• Do not attempt to repair this product. If the product is damaged or if you are in doubt about the proper
operation, take the complete product back to the place of purchase.
• Only use a dry cloth to clean the gong.
Wireless
• This product works using a radio signal that passes through walls, windows and doors. The range is
maximum 75 metres in the open air. The range indoors is strongly influenced by local conditions such
as concrete, glass and metals. On average, the indoor range is approximately 30 metres.
• New double glass often includes a thin metallic layer. This type of glazing (“HR glass”) allows most
visible light to pass through but has a negative impact on radio signals. If there is HR glass between the
transmitter and receiver, you should expect a significant reduction of the range of the wireless signal.
• This product operates at a frequency of 433.92 MHz. It complies with the essential requirements and
other conditions of R&TTE Directive 1999/5/EC and can be used in all EU countries.
3
CDB-6500C DOORBELL
• There may be restrictions on the use of this device outside the EU. If this device is used outside the EU,
check whether the device complies with the local directives.
This product complies with the essential requirements and other relevant provisions of the applicable
European directives. The Declaration of Conformity (DoC) is available at www.coco-technology.com.
If possible, submit this product for recycling after use. Do not dispose of the product with household trash.
Warranty and copyright
This device is covered by a 2-year warranty that begins on the day of purchase. Visit www.cocotechnology.com/warranty for additional information. Reprinting of (portions of) this manual without
permission from Pan-Trade International B.V. is expressly prohibited.
4
CDB-6500C DOORBELL
PAN-TRADE INTERNATIONAL B.V.
P.O. BOX 126
4760 AC ZEVENBERGEN
THE NETHERLANDS
www.coco-technology.com
Declaration of Conformity
Pan-Trade International BV declares that the COCO product, model:
type designation
item number
CDB-6500C DOORBELL
74025
is in compliance with the essential requirements and other relevant provisions of directives R&TTE
1999/5/EC, EMC 2004/108/EC and LVD 2006/95/EC and is compatible with the standards EN 300 2201/3, EN 55015 and EN 301 489-1/3.
Manufacturer / Authorised representative,
M.A. Hoekstra, managing director
Zevenbergen, 2008-01-30
5